From f4f1f7a3ed5935ab1b62c5c68e850dfa702892b4 Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Wed, 25 Jul 2018 14:22:41 +0200 Subject: [PATCH] MIPS: mscc: ocelot: add MIIM1 bus There is an additional MIIM (MDIO) bus in this SoC so let's declare it in the dtsi. This bus requires GPIO 14 and 15 pins that need to be muxed. There is no support for internal PHY reset on this bus on the contrary of MIIM0 so there is only one register address space and not two. Signed-off-by: Quentin Schulz Acked-by: Alexandre Belloni Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/20014/ Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: thomas.petazzoni@bootlin.com --- arch/mips/boot/dts/mscc/ocelot.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi index 7096915f26e0d..d7f0e3551500f 100644 --- a/arch/mips/boot/dts/mscc/ocelot.dtsi +++ b/arch/mips/boot/dts/mscc/ocelot.dtsi @@ -178,6 +178,11 @@ pins = "GPIO_12", "GPIO_13"; function = "uart2"; }; + + miim1: miim1 { + pins = "GPIO_14", "GPIO_15"; + function = "miim1"; + }; }; mdio0: mdio@107009c { @@ -201,5 +206,16 @@ reg = <3>; }; }; + + mdio1: mdio@10700c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,ocelot-miim"; + reg = <0x10700c0 0x24>; + interrupts = <15>; + pinctrl-names = "default"; + pinctrl-0 = <&miim1>; + status = "disabled"; + }; }; }; -- 2.39.5