From ec7cfaee9190a5da27d54c12cc27fdbaddde9f90 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Tue, 1 Aug 2017 12:58:47 +0300 Subject: [PATCH] ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1 which hold MSB bits of the physical address correspondingly of region start and end otherwise SLC region operation is executed in unpredictable manner Without this patch, SLC flushes on HSDK (IOC disabled) were taking seconds. Cc: stable@vger.kernel.org #4.4+ Reported-by: Vladimir Kondratiev Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta [vgupta: PAR40 regs only written if PAE40 exist] --- arch/arc/include/asm/cache.h | 2 ++ arch/arc/mm/cache.c | 13 +++++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 19ebddffb279d..02fd1cece6ef3 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -96,7 +96,9 @@ extern unsigned long perip_base, perip_end; #define ARC_REG_SLC_FLUSH 0x904 #define ARC_REG_SLC_INVALIDATE 0x905 #define ARC_REG_SLC_RGN_START 0x914 +#define ARC_REG_SLC_RGN_START1 0x915 #define ARC_REG_SLC_RGN_END 0x916 +#define ARC_REG_SLC_RGN_END1 0x917 /* Bit val in SLC_CONTROL */ #define SLC_CTRL_DIS 0x001 diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index bebc24cb79126..874913b3e8265 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -665,6 +665,7 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) static DEFINE_SPINLOCK(lock); unsigned long flags; unsigned int ctrl; + phys_addr_t end; spin_lock_irqsave(&lock, flags); @@ -694,8 +695,16 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) * END needs to be setup before START (latter triggers the operation) * END can't be same as START, so add (l2_line_sz - 1) to sz */ - write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1)); - write_aux_reg(ARC_REG_SLC_RGN_START, paddr); + end = paddr + sz + l2_line_sz - 1; + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end)); + + write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end)); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr)); + + write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr)); /* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */ read_aux_reg(ARC_REG_SLC_CTRL); -- 2.39.5