From e1eba08bc0eac3ed7f1d3d19f8d55317b76c7eb6 Mon Sep 17 00:00:00 2001 From: David Chang Date: Wed, 27 Nov 2013 15:48:36 +0800 Subject: [PATCH] r8169: check ALDPS bit and disable it if enabled for the 8168g Windows driver will enable ALDPS function, but linux driver and firmware do not have any configuration related to ALDPS function for 8168g. So restart system to linux and remove the NIC cable, LAN enter ALDPS, then LAN RX will be disabled. This issue can be easily reproduced on dual boot windows and linux system with RTL_GIGA_MAC_VER_40 chip. Realtek said, ALDPS function can be disabled by configuring to PHY, switch to page 0x0A43, reg0x10 bit2=0. Signed-off-by: David Chang Acked-by: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 799387570766b..c737f0ea5de75 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3465,6 +3465,11 @@ static void rtl8168g_1_hw_phy_config(struct rtl8169_private *tp) rtl_writephy(tp, 0x14, 0x9065); rtl_writephy(tp, 0x14, 0x1065); + /* Check ALDPS bit, disable it if enabled */ + rtl_writephy(tp, 0x1f, 0x0a43); + if (rtl_readphy(tp, 0x10) & 0x0004) + rtl_w1w0_phy(tp, 0x10, 0x0000, 0x0004); + rtl_writephy(tp, 0x1f, 0x0000); } -- 2.39.5