From c8ea4a3029622878e1783cd0e748017bccd134b1 Mon Sep 17 00:00:00 2001 From: John Hsu Date: Mon, 10 Jun 2019 11:40:40 +0800 Subject: [PATCH] ASoC: nau8825: fix fake interruption when booting There is no pull-up resistor at IRQ line where it connects from the codec to SoC. When booting, the signal of IRQ pin will keep low which makes the SoC invoke the ISR repeatedly because the IRQ is registered trigger low. It will not stop until the codec sets up the interruption and pulls the signal high. In the patch, nau8825 will internally pull the signal to high at booting in case the fake interrupts happen. Signed-off-by: John Hsu Tested-by: Cheng-Yi Chiang Signed-off-by: Mark Brown --- sound/soc/codecs/nau8825.c | 4 ++++ sound/soc/codecs/nau8825.h | 2 ++ 2 files changed, 6 insertions(+) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 47e65cf998792..83ec841f78655 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1881,6 +1881,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) NAU8825_JACK_EJECT_DEBOUNCE_MASK, nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT); + /* Pull up IRQ pin */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); /* Mask unneeded IRQs: 1 - disable, 0 - enable */ regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff); diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index f6074c6185691..3f41897ed3f61 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -171,6 +171,8 @@ #define NAU8825_JACK_POLARITY (1 << 1) /* 0 - active low, 1 - active high */ /* INTERRUPT_MASK (0xf) */ +#define NAU8825_IRQ_PIN_PULLUP (1 << 14) +#define NAU8825_IRQ_PIN_PULL_EN (1 << 13) #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10) #define NAU8825_IRQ_RMS_EN (1 << 8) -- 2.39.5