From c36a36267baf046747bbfc680bebc959c5f64d2c Mon Sep 17 00:00:00 2001 From: Oleksij Rempel Date: Thu, 2 Aug 2018 12:34:25 +0200 Subject: [PATCH] ARM: dts: imx6: RIoTboard provide standby on power off option This board, as well as some other boards with i.MX6 and a PMIC, uses a "PMIC_STBY_REQ" line to notify the PMIC about a state change. The PMIC is programmed for a specific state change before triggering the line. In this case, PMIC_STBY_REQ can be used for stand by, sleep and power off modes. Signed-off-by: Oleksij Rempel Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-riotboard.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index dd3226fe5ecd5..8e51491e68cfd 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -84,6 +84,10 @@ status = "okay"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -164,6 +168,7 @@ reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <16 8>; + fsl,pmic-stby-poweroff; regulators { reg_vddcore: sw1ab { /* VDDARM_IN */ -- 2.39.5