From a8ccebe5e6cdec276fc617fec560731c3e232f1e Mon Sep 17 00:00:00 2001 From: Eliav Farber Date: Thu, 8 Sep 2022 15:24:34 +0000 Subject: [PATCH] hwmon: (mr75203) enable polling for all VM channels Configure ip-polling register to enable polling for all voltage monitor channels. This enables reading the voltage values for all inputs other than just input 0. Fixes: e6dc6d6dd8bd ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com Signed-off-by: Guenter Roeck --- drivers/hwmon/mr75203.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c index 812ae40e7d74d..9259779cc2dff 100644 --- a/drivers/hwmon/mr75203.c +++ b/drivers/hwmon/mr75203.c @@ -388,6 +388,19 @@ static int pvt_init(struct pvt_device *pvt) if (ret) return ret; + val = (BIT(pvt->c_num) - 1) | VM_CH_INIT | + IP_POLL << SDIF_ADDR_SFT | SDIF_WRN_W | SDIF_PROG; + ret = regmap_write(v_map, SDIF_W, val); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(v_map, SDIF_STAT, + val, !(val & SDIF_BUSY), + PVT_POLL_DELAY_US, + PVT_POLL_TIMEOUT_US); + if (ret) + return ret; + val = CFG1_VOL_MEAS_MODE | CFG1_PARALLEL_OUT | CFG1_14_BIT | IP_CFG << SDIF_ADDR_SFT | SDIF_WRN_W | SDIF_PROG; -- 2.39.5