From a323f37b591f4ca24e72032c83bb81ad890d27aa Mon Sep 17 00:00:00 2001 From: Mike Willard Date: Wed, 1 Apr 2020 20:54:54 +0000 Subject: [PATCH] ASoC: cs4270: pull reset GPIO low then high Pull the RST line low then high when initializing the driver, in order to force a reset of the chip. Previously, the line was not pulled low, which could result in the chip registers not resetting to their default values on boot. Signed-off-by: Mike Willard Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200401205454.79792-1-mwillard@izotope.com Signed-off-by: Mark Brown --- sound/soc/codecs/cs4270.c | 40 ++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 5f25b9f872bdf..8a02791e44ad6 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -137,6 +137,9 @@ struct cs4270_private { /* power domain regulators */ struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; + + /* reset gpio */ + struct gpio_desc *reset_gpio; }; static const struct snd_soc_dapm_widget cs4270_dapm_widgets[] = { @@ -648,6 +651,22 @@ static const struct regmap_config cs4270_regmap = { .volatile_reg = cs4270_reg_is_volatile, }; +/** + * cs4270_i2c_remove - deinitialize the I2C interface of the CS4270 + * @i2c_client: the I2C client object + * + * This function puts the chip into low power mode when the i2c device + * is removed. + */ +static int cs4270_i2c_remove(struct i2c_client *i2c_client) +{ + struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client); + + gpiod_set_value_cansleep(cs4270->reset_gpio, 0); + + return 0; +} + /** * cs4270_i2c_probe - initialize the I2C interface of the CS4270 * @i2c_client: the I2C client object @@ -660,7 +679,6 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, const struct i2c_device_id *id) { struct cs4270_private *cs4270; - struct gpio_desc *reset_gpiod; unsigned int val; int ret, i; @@ -679,10 +697,21 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client, if (ret < 0) return ret; - reset_gpiod = devm_gpiod_get_optional(&i2c_client->dev, "reset", - GPIOD_OUT_HIGH); - if (PTR_ERR(reset_gpiod) == -EPROBE_DEFER) - return -EPROBE_DEFER; + /* reset the device */ + cs4270->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(cs4270->reset_gpio)) { + dev_dbg(&i2c_client->dev, "Error getting CS4270 reset GPIO\n"); + return PTR_ERR(cs4270->reset_gpio); + } + + if (cs4270->reset_gpio) { + dev_dbg(&i2c_client->dev, "Found reset GPIO\n"); + gpiod_set_value_cansleep(cs4270->reset_gpio, 1); + } + + /* Sleep 500ns before i2c communications */ + ndelay(500); cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap); if (IS_ERR(cs4270->regmap)) @@ -735,6 +764,7 @@ static struct i2c_driver cs4270_i2c_driver = { }, .id_table = cs4270_id, .probe = cs4270_i2c_probe, + .remove = cs4270_i2c_remove, }; module_i2c_driver(cs4270_i2c_driver); -- 2.39.5