From 96698a36e84c9b326598ade2df0d91b2728a2c90 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 22 Aug 2018 10:36:29 -0700 Subject: [PATCH] arm64: dts: qcom: sdm845-mtp: Add nodes for USB Set the various nodes to "okay" and hook up the regulators. NOTE: For now the main USB port (the one that goes out the Type C connector) is forced to host. Eventually someone will need to get the Type C detection hooked up and get this all integrated with the PMI8998 PMIC. The reason for forcing to "host" in the meantime is that this will leave us with one "host" and one "peripheral" port. In order for host mode this to work, we assume that the bootloader left things configured enough for us. Apparently the magic for that is is to do these writes on pmi8998: - pm_comm_write_byte(2, 0x1153, 0x2C, 0); - pm_comm_write_byte(2, 0x1152, 0x07, 0); - pm_comm_write_byte(2, 0x1140, 0x00, 0); - pm_comm_write_byte(2, 0x1140, 0x01, 0); Signed-off-by: Douglas Anderson Reviewed-by: Stephen Boyd Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 61 +++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index ef53c4ae60b08..eedfaf8922e2a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -356,6 +356,67 @@ status = "okay"; }; +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* Until we have Type C hooked up we'll force this as host. */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb1_ss_1p2>; + vdda-pll-supply = <&vdda_usb1_ss_core>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* + * Though the USB block on SDM845 can support host, there's no vbus + * signal for this port on MTP. Thus (unless you have a non-compliant + * hub that works without vbus) the only sensible thing is to force + * peripheral mode. + */ + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + /* PINCTRL - additions to nodes defined in sdm845.dtsi */ &qup_i2c10_default { -- 2.39.5