From 70c2f423cbcc88396f2f52790d431b303a9b2609 Mon Sep 17 00:00:00 2001 From: Philip Oberfichtner Date: Fri, 20 May 2022 10:46:23 +0200 Subject: [PATCH] ARM: dts: imx: Simplify fec node for iMX6QDL DHCOM boards Firstly the FEC can now use the regulator reg_eth_vio from imx6qdl-dhcom-som.dtsi instead of defining its own. Secondly the &fec node is moved to the more generic SoM device tree file, because it can be used by multiple boards. Reviewed-by: Marek Vasut Signed-off-by: Philip Oberfichtner --- arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi | 13 ------------- arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi | 7 +++++++ 2 files changed, 7 insertions(+), 13 deletions(-) diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi index a1ffb1d6fc..0673c21e3c 100644 --- a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi @@ -5,19 +5,6 @@ #include "imx6qdl-dhcom-u-boot.dtsi" -/ { - fec_vio: regulator-fec { - compatible = "regulator-fixed"; - - regulator-name = "fec-vio"; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; -}; - &fec { phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; - phy-reset-duration = <1>; - phy-reset-post-delay = <10>; - - phy-supply = <&fec_vio>; }; diff --git a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi index 91545ab6e9..190567ab7b 100644 --- a/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-dhcom-u-boot.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: (GPL-2.0+) /* * Copyright (C) 2020 Harald Seiler + * Copyright (C) 2022 Philip Oberfichtner */ / { @@ -9,6 +10,12 @@ }; }; +&fec { + phy-reset-duration = <1>; + phy-reset-post-delay = <10>; + phy-supply = <®_eth_vio>; +}; + &i2c3 { eeprom0: eeprom@50 { }; -- 2.39.5