From 64a7fa40fa744b015c900410f542e5493513b37d Mon Sep 17 00:00:00 2001 From: Dario Binacchi Date: Wed, 30 Dec 2020 00:06:39 +0100 Subject: [PATCH] clk: ti: add support for clkctrl clocks Until now the clkctrl clocks have been enabled/disabled through platform routines. Thanks to this patch they can be enabled and configured directly by the probed devices that need to use them. For DT binding details see Linux doc: - Documentation/devicetree/bindings/clock/ti-clkctrl.txt Signed-off-by: Dario Binacchi --- drivers/clk/ti/Kconfig | 6 ++ drivers/clk/ti/Makefile | 1 + drivers/clk/ti/clk-ctrl.c | 154 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 161 insertions(+) create mode 100644 drivers/clk/ti/clk-ctrl.c diff --git a/drivers/clk/ti/Kconfig b/drivers/clk/ti/Kconfig index 30959a316a..9e257a2eb7 100644 --- a/drivers/clk/ti/Kconfig +++ b/drivers/clk/ti/Kconfig @@ -10,6 +10,12 @@ config CLK_TI_AM3_DPLL This enables the DPLL clock drivers support on AM33XX SoCs. The DPLL provides all interface clocks and functional clocks to the processor. +config CLK_TI_CTRL + bool "TI OMAP4 clock controller" + depends on CLK && OF_CONTROL + help + This enables the clock controller driver support on TI's SoCs. + config CLK_TI_DIVIDER bool "TI divider clock driver" depends on CLK && OF_CONTROL && CLK_CCF diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index f8aa735c83..ed45f18311 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_ARCH_OMAP2PLUS) += clk.o obj-$(CONFIG_CLK_TI_AM3_DPLL) += clk-am3-dpll.o clk-am3-dpll-x2.o +obj-$(CONFIG_CLK_TI_CTRL) += clk-ctrl.o obj-$(CONFIG_CLK_TI_DIVIDER) += clk-divider.o obj-$(CONFIG_CLK_TI_GATE) += clk-gate.o obj-$(CONFIG_CLK_TI_MUX) += clk-mux.o diff --git a/drivers/clk/ti/clk-ctrl.c b/drivers/clk/ti/clk-ctrl.c new file mode 100644 index 0000000000..940e8d6caf --- /dev/null +++ b/drivers/clk/ti/clk-ctrl.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * OMAP clock controller support + * + * Copyright (C) 2020 Dario Binacchi + */ + +#include +#include +#include +#include +#include + +struct clk_ti_ctrl_offs { + fdt_addr_t start; + fdt_size_t end; +}; + +struct clk_ti_ctrl_priv { + int offs_num; + struct clk_ti_ctrl_offs *offs; +}; + +static int clk_ti_ctrl_check_offs(struct clk *clk, fdt_addr_t offs) +{ + struct clk_ti_ctrl_priv *priv = dev_get_priv(clk->dev); + int i; + + for (i = 0; i < priv->offs_num; i++) { + if (offs >= priv->offs[i].start && offs <= priv->offs[i].end) + return 0; + } + + return -EFAULT; +} + +static int clk_ti_ctrl_disable(struct clk *clk) +{ + struct clk_ti_ctrl_priv *priv = dev_get_priv(clk->dev); + u32 *clk_modules[2] = { }; + fdt_addr_t offs; + int err; + + offs = priv->offs[0].start + clk->id; + err = clk_ti_ctrl_check_offs(clk, offs); + if (err) { + dev_err(clk->dev, "invalid offset: 0x%lx\n", offs); + return err; + } + + clk_modules[0] = (u32 *)(offs); + dev_dbg(clk->dev, "module address=%p\n", clk_modules[0]); + do_disable_clocks(NULL, clk_modules, 1); + return 0; +} + +static int clk_ti_ctrl_enable(struct clk *clk) +{ + struct clk_ti_ctrl_priv *priv = dev_get_priv(clk->dev); + u32 *clk_modules[2] = { }; + fdt_addr_t offs; + int err; + + offs = priv->offs[0].start + clk->id; + err = clk_ti_ctrl_check_offs(clk, offs); + if (err) { + dev_err(clk->dev, "invalid offset: 0x%lx\n", offs); + return err; + } + + clk_modules[0] = (u32 *)(offs); + dev_dbg(clk->dev, "module address=%p\n", clk_modules[0]); + do_enable_clocks(NULL, clk_modules, 1); + return 0; +} + +static ulong clk_ti_ctrl_get_rate(struct clk *clk) +{ + return 0; +} + +static int clk_ti_ctrl_of_xlate(struct clk *clk, + struct ofnode_phandle_args *args) +{ + if (args->args_count != 2) { + dev_err(clk->dev, "invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + if (args->args_count) + clk->id = args->args[0]; + else + clk->id = 0; + + dev_dbg(clk->dev, "name=%s, id=%ld\n", clk->dev->name, clk->id); + return 0; +} + +static int clk_ti_ctrl_of_to_plat(struct udevice *dev) +{ + struct clk_ti_ctrl_priv *priv = dev_get_priv(dev); + fdt_size_t fdt_size; + int i, size; + + size = dev_read_size(dev, "reg"); + if (size < 0) { + dev_err(dev, "failed to get 'reg' size\n"); + return size; + } + + priv->offs_num = size / 2 / sizeof(u32); + dev_dbg(dev, "size=%d, regs_num=%d\n", size, priv->offs_num); + + priv->offs = kmalloc_array(priv->offs_num, sizeof(*priv->offs), + GFP_KERNEL); + if (!priv->offs) + return -ENOMEM; + + for (i = 0; i < priv->offs_num; i++) { + priv->offs[i].start = + dev_read_addr_size_index(dev, i, &fdt_size); + if (priv->offs[i].start == FDT_ADDR_T_NONE) { + dev_err(dev, "failed to get offset %d\n", i); + return -EINVAL; + } + + priv->offs[i].end = priv->offs[i].start + fdt_size; + dev_dbg(dev, "start=0x%08lx, end=0x%08lx\n", + priv->offs[i].start, priv->offs[i].end); + } + + return 0; +} + +static struct clk_ops clk_ti_ctrl_ops = { + .of_xlate = clk_ti_ctrl_of_xlate, + .enable = clk_ti_ctrl_enable, + .disable = clk_ti_ctrl_disable, + .get_rate = clk_ti_ctrl_get_rate, +}; + +static const struct udevice_id clk_ti_ctrl_ids[] = { + {.compatible = "ti,clkctrl"}, + {}, +}; + +U_BOOT_DRIVER(clk_ti_ctrl) = { + .name = "ti_ctrl_clk", + .id = UCLASS_CLK, + .of_match = clk_ti_ctrl_ids, + .ofdata_to_platdata = clk_ti_ctrl_of_to_plat, + .ops = &clk_ti_ctrl_ops, + .priv_auto = sizeof(struct clk_ti_ctrl_priv), +}; -- 2.39.5