From 2b1acf23b0a22e1c44c6f3cd8cccd9b22b27d8af Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 21 Apr 2017 00:41:20 +0000 Subject: [PATCH] ASoC: rsnd: Fix possible NULL pointer dereference 6ff3a22433ae9d43a0c310a425abe9ab7b8cb014 ("ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHz") supports both 44.1kHz/48kHz clock-frequency settings for ADG which will be used for AUDIO_OLKOUTn. But some board doesn't need it, thus, it is not mandatory. But, above patch didn't care about the case of "clock-frequency" DT property was not present. This patch ignores ADG settings if AUDIO_OLKOUTn was not used. Signed-off-by: Marek Vasut [Kuninori: tidyup not to break non AUDIO_OLKOUTn case] Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/rcar/adg.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index faa1a4f09766b..66203d107a11e 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -453,13 +453,18 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, [CLKI] = 0x2, }; - of_property_read_u32(np, "#clock-cells", &count); + ckr = 0; + rbga = 2; /* default 1/6 */ + rbgb = 2; /* default 1/6 */ /* * ADG supports BRRA/BRRB output only * this means all clkout0/1/2/3 will be same rate */ prop = of_find_property(np, "clock-frequency", NULL); + if (!prop) + goto rsnd_adg_get_clkout_end; + req_size = prop->length / sizeof(u32); of_property_read_u32_array(np, "clock-frequency", req_rate, req_size); @@ -472,6 +477,9 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, req_48kHz_rate = req_rate[i]; } + if (req_rate[0] % 48000 == 0) + adg->flags = AUDIO_OUT_48; + /* * This driver is assuming that AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC * have 44.1kHz or 48kHz base clocks for now. @@ -481,9 +489,6 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, * rsnd_adg_ssi_clk_try_start() * rsnd_ssi_master_clk_start() */ - ckr = 0; - rbga = 2; /* default 1/6 */ - rbgb = 2; /* default 1/6 */ adg->rbga_rate_for_441khz = 0; adg->rbgb_rate_for_48khz = 0; for_each_rsnd_clk(clk, adg, i) { @@ -528,6 +533,7 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, * this means all clkout0/1/2/3 will be * same rate */ + of_property_read_u32(np, "#clock-cells", &count); /* * for clkout */ @@ -557,13 +563,11 @@ static void rsnd_adg_get_clkout(struct rsnd_priv *priv, &adg->onecell); } +rsnd_adg_get_clkout_end: adg->ckr = ckr; adg->rbga = rbga; adg->rbgb = rbgb; - if (req_rate[0] % 48000 == 0) - adg->flags = AUDIO_OUT_48; - for_each_rsnd_clkout(clk, adg, i) dev_dbg(dev, "clkout %d : %p : %ld\n", i, clk, clk_get_rate(clk)); dev_dbg(dev, "BRGCKR = 0x%08x, BRRA/BRRB = 0x%x/0x%x\n", -- 2.39.5