From 275c348804ea404f72178739940864d123bfff7d Mon Sep 17 00:00:00 2001 From: Anson Huang <b20788@freescale.com> Date: Fri, 5 Dec 2014 16:23:48 +0800 Subject: [PATCH] ARM: dts: imx6q: update cpufreq volt/freq table According to latest i.MX6Q datasheet Rev. 3, 02/2014, the latest cpufreq volt/freq table is as below: LDO enabled/bypassed(min value): 996MHz: VDDARM: 1.225V, VDDSOC: 1.150V; 792MHz: VDDARM: 1.150V, VDDSOC: 1.150V; 396MHz: VDDARM: 0.925V, VDDSOC: 1.150V; the 792MHz setpoint's VDDARM min voltage is updated from 1.125V to 1.150V, adding 25mV to cover board IR drop, 1.175V is the right voltage we should use. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/boot/dts/imx6q.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 85f72e6b5bade..37ee4e5889101 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -31,7 +31,7 @@ 1200000 1275000 996000 1250000 852000 1250000 - 792000 1150000 + 792000 1175000 396000 975000 >; fsl,soc-operating-points = < -- 2.39.5