From 238b6820498e1efcb850ffa71916544f3074a0a3 Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Wed, 22 Aug 2012 11:53:18 -0500 Subject: [PATCH] xhci: Recognize USB 3.0 devices as superspeed at powerup On Intel Panther Point chipset USB 3.0 devices show up as high-speed devices on powerup, but after an s3 cycle they are correctly recognized as SuperSpeed. At powerup switch the port to xHCI so that USB 3.0 devices are correctly recognized. BugLink: http://bugs.launchpad.net/bugs/1000424 This patch should be backported to kernels as old as 3.0, that contain commit ID 298e3a6735391ac220c926702b1f9aa817cf2b0f "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Manoj Iyer Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/pci-quirks.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index c5e9e4a76f148..486e8122f0d8b 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -870,9 +870,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) /* Disable any BIOS SMIs and clear all SMI events*/ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); +hc_init: if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); -hc_init: + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any -- 2.39.5