From 0395be967b067d99494113d78470574e86a02ed4 Mon Sep 17 00:00:00 2001 From: Apurva Nandan Date: Fri, 16 Jul 2021 23:25:03 +0000 Subject: [PATCH] spi: cadence-quadspi: Fix check condition for DTR ops buswidth and dtr fields in spi_mem_op are only valid when the corresponding spi_mem_op phase has a non-zero length. For example, SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR phase. Fix the dtr checks in set_protocol() and suppports_mem_op() to ignore empty spi_mem_op phases, as checking for dtr field in empty phase will result in false negatives. Signed-off-by: Apurva Nandan Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com Signed-off-by: Mark Brown --- drivers/spi/spi-cadence-quadspi.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index a2de23516553c..101cc71bffa75 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -325,7 +325,15 @@ static int cqspi_set_protocol(struct cqspi_flash_pdata *f_pdata, f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE; f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE; f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; - f_pdata->dtr = op->data.dtr && op->cmd.dtr && op->addr.dtr; + + /* + * For an op to be DTR, cmd phase along with every other non-empty + * phase should have dtr field set to 1. If an op phase has zero + * nbytes, ignore its dtr field; otherwise, check its dtr field. + */ + f_pdata->dtr = op->cmd.dtr && + (!op->addr.nbytes || op->addr.dtr) && + (!op->data.nbytes || op->data.dtr); switch (op->data.buswidth) { case 0: @@ -1228,8 +1236,15 @@ static bool cqspi_supports_mem_op(struct spi_mem *mem, { bool all_true, all_false; - all_true = op->cmd.dtr && op->addr.dtr && op->dummy.dtr && - op->data.dtr; + /* + * op->dummy.dtr is required for converting nbytes into ncycles. + * Also, don't check the dtr field of the op phase having zero nbytes. + */ + all_true = op->cmd.dtr && + (!op->addr.nbytes || op->addr.dtr) && + (!op->dummy.nbytes || op->dummy.dtr) && + (!op->data.nbytes || op->data.dtr); + all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr && !op->data.dtr; -- 2.39.5