]> git.baikalelectronics.ru Git - kernel.git/commit
typec: tcpm: Only request matching pdos
authorBadhri Jagan Sridharan <badhri@google.com>
Thu, 16 Nov 2017 01:01:56 +0000 (17:01 -0800)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 7 Dec 2017 15:03:15 +0000 (16:03 +0100)
commit6bf90bb549a441ed42cd5b077a107158bc673e46
tree28213721c262a930deaa269cbac9f85a8edb9b0a
parentaff5d4ff236dd647e193e6131b4fc8f679b0756a
typec: tcpm: Only request matching pdos

At present, TCPM code assumes that local device supports
variable/batt pdos and always selects the pdo with highest
possible power within the board limit. This assumption
might not hold good for all devices. To overcome this,
this patch makes TCPM only accept a source_pdo when there is
a matching sink pdo.

For Fixed pdos: The voltage should match between the
incoming source_cap and the registered snk_pdo
For Variable/Batt pdos: The incoming source_cap voltage
range should fall within the registered snk_pdo's voltage
range.

Also, when the cap_mismatch bit is set, the max_power/current
should be set to the max_current/power of the sink_pdo.
This is according to:

"If the Capability Mismatch bit is set to one
The Maximum Operating Current/Power field may contain a value
larger than the maximum current/power offered in the Source
Capabilities message’s PDO as referenced by the Object position field.
This enables the Sink to indicate that it requires more current/power
than is being offered. If the Sink requires a different voltage this
will be indicated by its Sink Capabilities message.

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/typec/tcpm.c