Samuel Holland [Wed, 15 Jun 2022 04:55:43 +0000 (23:55 -0500)]
drm/sun4i: sun8i-hdmi-phy: Group PHY ops functions by generation
Now that the PHY ops are separated, sort them topologically, with the
common sun8i_hdmi_phy_set_polarity helper at the top. No function
contents are changed in this commit.
Samuel Holland [Wed, 15 Jun 2022 04:55:42 +0000 (23:55 -0500)]
drm/sun4i: sun8i-hdmi-phy: Separate A83T and H3 PHY ops
Since the driver already needs to support multiple sets of ops, we can
drop the mid-layer used by the A83T and H3 PHYs. They share only a small
amount of code; factor this out as sun8i_hdmi_phy_set_polarity.
For clarity, this commit keeps the existing function order.
Samuel Holland [Wed, 15 Jun 2022 04:55:41 +0000 (23:55 -0500)]
drm/sun4i: sun8i-hdmi-phy: Support multiple custom PHY ops
The D1 SoC comes with a new custom HDMI PHY, which does not share any
registers with the existing custom PHY. So it needs a new set of ops.
Instead of providing a flag in the variant structure, provide the ops
themselves.
Samuel Holland [Wed, 15 Jun 2022 04:55:40 +0000 (23:55 -0500)]
drm/sun4i: sun8i-hdmi-phy: Used device-managed clocks/resets
Now that the HDMI PHY is using a platform driver, it can use device-
managed resources. Use these, as well as the dev_err_probe helper, to
simplify the probe function and get rid of the remove function.
The driver uses crypto hash functions so it needs to select CRYPTO_HASH.
This fixes build errors:
drivers/gpu/drm/bridge/ite-it6505.o: in function `it6505_hdcp_wait_ksv_list':
ite-it6505.c:(.text+0x4c26): undefined reference to `crypto_alloc_shash'
ite-it6505.c:(.text+0x4c6d): undefined reference to `crypto_shash_digest'
ite-it6505.c:(.text+0x4c7d): undefined reference to `crypto_destroy_tfm'
ite-it6505.c:(.text+0x4d69): undefined reference to `crypto_destroy_tfm'
drm/bridge: anx7625: Zero error variable when panel bridge not present
While parsing the DT, the anx7625 driver checks for the presence of a
panel bridge on endpoint 1. If it is missing, pdata->panel_bridge stores
the error pointer and the function returns successfully without first
cleaning that variable. This is an issue since other functions later
check for the presence of a panel bridge by testing the trueness of that
variable.
In order to ensure proper behavior, zero out pdata->panel_bridge before
returning when no panel bridge is found.
Fixes: 11180e59c868 ("drm/bridge: anx7625: switch to devm_drm_of_get_bridge") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220613163705.1531721-1-nfraprado@collabora.com
Revert "fbdev: vesafb: Allow to be built if COMPILE_TEST is enabled"
This reverts commit acd8ce889e60619da600cd75ecd07c204d9e63c0. The kernel
test robot reported that attempting to build the vesafb driver fails on
some architectures, because these don't define a `struct screen_info`.
This leads to linking errors, for example on parisc with allyesconfig:
hppa-linux-ld: drivers/video/fbdev/vesafb.o: in function `vesafb_probe':
>> (.text+0x738): undefined reference to `screen_info'
>> hppa-linux-ld: (.text+0x73c): undefined reference to `screen_info'
hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
>> (.init.text+0x28): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x30): undefined reference to `screen_info'
hppa-linux-ld: (.init.text+0x78): undefined reference to `screen_info'
The goal of commit acd8ce889e60 ("fbdev: vesafb: Allow to be built if
COMPILE_TEST is enabled") was to have more build coverage for the driver
but it wrongly assumed that all architectures would define a screen_info.
Marek Vasut [Sun, 12 Jun 2022 14:33:49 +0000 (16:33 +0200)]
drm/msm: Fix convert to drm_of_get_data_lanes_count
Add missing header file into dsi_host.c and encode data-lanes string
directly into the warning message in the driver to avoid build issues
detected by lkp.
Fixes: 800d077cabce ("drm/msm: Convert to drm_of_get_data_lanes_count") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de
Jani Nikula [Wed, 8 Jun 2022 07:50:35 +0000 (10:50 +0300)]
drm/edid: add new interfaces around struct drm_edid
Add new functions drm_edid_read(), drm_edid_read_ddc(), and
drm_edid_read_custom() to replace drm_get_edid() and drm_do_get_edid()
for reading the EDID. The transition is expected to happen over a fairly
long time.
Note that the new drm_edid_read*() functions do not do any of the
connector updates anymore. The reading and parsing will be completely
separated from each other.
Add new functions drm_edid_alloc(), drm_edid_dup(), and drm_edid_free()
for allocating and freeing drm_edid containers.
Jani Nikula [Wed, 8 Jun 2022 07:50:31 +0000 (10:50 +0300)]
drm/edid: fix CTA data block collection size for CTA version 3
The CTA Data Block Collection is valid only for CTA extension version
3. In versions 1 and 2, it is a reserved block, which we ignore.
The DTD start offset (byte 2, or d in CTA-861 spec), which determines
the CTA Data Block Collection size, is specified slightly differently
for different versions:
Version 1:
d = offset for the byte following the reserved data block. If no
data is provided in the reserved data block, then d=4. If no DTDs
are provided, then d=0
Version 2:
d = offset for the byte following the reserved data block. If no
data is provided in the reserved data block, then d=4. If d=0, then
no detailed timing descriptors are provided, and no data is provided
in the reserved data block.
Version 3:
d = offset for the byte following the data block collection. If no
data is provided in the data block collection, then d=4. If d=0,
then no detailed timing descriptors are provided, and no data is
provided in the data block collection.
Ever since commit a0cc9a927651 ("drm: edid: Add some bounds checking"),
we've interpreted 0 to mean there are no DTDs but it's all Data
Blocks. Per the spec, Data Blocks are only valid for version 3, where we
should interpret 0 to mean there are no data blocks.
Follow the spec (and hope the EDIDs follow it too).
Yang Yingliang [Mon, 13 Jun 2022 06:34:54 +0000 (14:34 +0800)]
drm/syncobj: add missing error return code in drm_syncobj_transfer_to_timeline()
If dma_fence_unwrap_merge() fails, it should return error code
in drm_syncobj_transfer_to_timeline()
Fixes: ceb5702b0f8c ("drm: use dma_fence_unwrap_merge() in drm_syncobj") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613063454.2609364-1-yangyingliang@huawei.com
Igor Torrente [Mon, 4 Apr 2022 20:45:07 +0000 (17:45 -0300)]
drm: vkms: Alloc the compose frame using vzalloc
Currently, the memory to the composition frame is being allocated using
the kzmalloc. This comes with the limitation of maximum size of one
page size(which in the x86_64 is 4Kb and 4MB for default and hugepage
respectively).
Somes test of igt (e.g. kms_plane@pixel-format) uses more than 4MB when
testing some pixel formats like ARGB16161616 and the following error were
showing up when running kms_plane@plane-panning-bottom-right*:
[drm:vkms_composer_worker [vkms]] *ERROR* Cannot allocate memory for
output frame.
This problem is addessed by allocating the memory using kvzalloc that
circunvents this limitation.
V5: Improve the commit message and drop the debugging issues in VKMS
TO-DO(Melissa Wen).
drm/vkms: check plane_composer->map[0] before using it
Fix a copypasta error. The caller of compose_plane() already checks
primary_composer->map. In contrast, plane_composer->map is never
verified here before handling.
Peter Robinson [Fri, 3 Jun 2022 09:26:06 +0000 (10:26 +0100)]
drm/v3d: Get rid of pm code
Runtime PM doesn't seem to work correctly on this driver. On top of
that, commit c064cdba7d81 ("drm/v3d/v3d_drv: Remove unused static
variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the
driver's PM ops were not hooked-up.
So, in order to support regular operation with V3D on BCM2711 (Raspberry
Pi 4), get rid of the PM code. PM will be reinstated once we figure out
the underlying issues.
Marek Vasut [Sun, 12 Jun 2022 13:21:52 +0000 (15:21 +0200)]
drm/bridge: rcar: Drop unused variables due to drm_of_get_data_lanes_count_ep
The rcar_mipi_dsi_parse_dt() now contains two uninitialized variables
due to conversion to common drm_of_get_data_lanes_count_ep() helper.
Drop them.
Fixes: 3d9f3e0e710f ("drm/bridge: rcar: Convert to drm_of_get_data_lanes_count_ep") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612132152.91052-3-marex@denx.de
Initialize dsi_lanes to -1, so that in case the endpoint is missing,
probe would fail as it did before the conversion, instead of depending
on uninitialized variable and thus undefined behavior.
Fixes: 3a198c03aa8b ("drm/bridge: tc358775: Convert to drm_of_get_data_lanes_count_ep") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612132152.91052-2-marex@denx.de
Marek Vasut [Sun, 12 Jun 2022 13:21:50 +0000 (15:21 +0200)]
drm: of: Mark empty drm_of_get_data_lanes_count and drm_of_get_data_lanes_ep static
Mark empty implementations of drm_of_get_data_lanes_count and
drm_of_get_data_lanes_ep as static inline, just like the rest
of empty implementations of various functions in drm_of.h .
Add missing comma to drm_of_get_data_lanes_count_ep() .
Fixes: 8fbf544de381 ("drm: of: Add drm_of_get_data_lanes_count and drm_of_get_data_lanes_ep") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612132152.91052-1-marex@denx.de
Marek Vasut [Sun, 12 Jun 2022 10:29:47 +0000 (12:29 +0200)]
drm/bridge: ti-sn65dsi83: Convert to drm_of_get_data_lanes_count
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612102947.13912-1-marex@denx.de
Marek Vasut [Sun, 12 Jun 2022 10:29:18 +0000 (12:29 +0200)]
drm/bridge: ti-sn65dsi83: Do not cache dsi_lanes and host twice
The DSI lane count can be accessed via the dsi device pointer, make use
of that. The DSI host pointer is only used in sn65dsi83_host_attach(),
move the code around so that the host does not have to be cached in the
driver private data. This simplifies the code further. No functional
change.
This has the added bonus that lt9211, tc358767, sn65dsi83 now use very
similar *_mipi_dsi_host_attach() which is ripe for deduplication.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220612102918.13874-1-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:22 +0000 (03:05 +0200)]
drm/bridge: rcar: Convert to drm_of_get_data_lanes_count_ep
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-11-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:21 +0000 (03:05 +0200)]
drm/msm: Convert to drm_of_get_data_lanes_count
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Rob Clark <robdclark@gmail.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-10-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:20 +0000 (03:05 +0200)]
drm/bridge: ti-sn65dsi86: Convert to drm_of_get_data_lanes_count
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-9-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:18 +0000 (03:05 +0200)]
drm/bridge: tc358775: Convert to drm_of_get_data_lanes_count_ep
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-7-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:17 +0000 (03:05 +0200)]
drm/bridge: tc358767: Convert to drm_of_get_data_lanes_count
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-6-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:16 +0000 (03:05 +0200)]
drm/bridge: lt9211: Convert to drm_of_get_data_lanes_count
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-5-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:15 +0000 (03:05 +0200)]
drm/bridge: lt8912: Convert to drm_of_get_data_lanes_count_ep
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-4-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:14 +0000 (03:05 +0200)]
drm/bridge: icn6211: Convert to drm_of_get_data_lanes_count_ep
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-3-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:13 +0000 (03:05 +0200)]
drm/bridge: anx7625: Convert to drm_of_get_data_lanes_count
Convert driver to use this new helper to standardize
OF "data-lanes" parsing.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Xin Ji <xji@analogixsemi.com>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-2-marex@denx.de
Marek Vasut [Tue, 24 May 2022 01:05:12 +0000 (03:05 +0200)]
drm: of: Add drm_of_get_data_lanes_count and drm_of_get_data_lanes_ep
Add helper function to count and sanitize DT "data-lanes" property
and return either error or the data-lanes count. This is useful for
both DSI and (e)DP "data-lanes" property. The later version of the
function is an extra wrapper which handles the endpoint look up by
regs, that's what majority of the drivers duplicate too, but not all
of them.
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220524010522.528569-1-marex@denx.de
Antonio Borneo [Tue, 7 Jun 2022 21:31:44 +0000 (23:31 +0200)]
drm: adv7511: override i2c address of cec before accessing it
Commit 6b4be4d3a70b ("drm: adv7511: Add support for
i2c_new_secondary_device") allows a device tree node to override
the default addresses of the secondary i2c devices. This is useful
for solving address conflicts on the i2c bus.
In adv7511_init_cec_regmap() the new i2c address of cec device is
read from device tree and immediately accessed, well before it is
written in the proper register to override the default address.
This can cause an i2c error during probe and a consequent probe
failure.
Once the new i2c address is read from the device tree, override
the default address before any attempt to access the cec.
drm: Add support for the LogiCVC display controller
Introduces a driver for the LogiCVC display controller, a programmable
logic controller optimized for use in Xilinx Zynq-7000 SoCs and other
Xilinx FPGAs. The controller is mostly configured at logic synthesis
time so only a subset of configuration is left for the driver to
handle.
The following features are implemented and tested:
- LVDS 4-bit interface;
- RGB565 pixel formats;
- Multiple layers and hardware composition;
- Layer-wide alpha mode;
The following features are implemented but untested:
- Other RGB pixel formats;
- Layer framebuffer configuration for version 4;
- Lowest-layer used as background color;
- Per-pixel alpha mode.
The following features are not implemented:
- YUV pixel formats;
- DVI, LVDS 3-bit, ITU656 and camera link interfaces;
- External parallel input for layer;
- Color-keying;
- LUT-based alpha modes.
Additional implementation-specific notes:
- Panels are only enabled after the first page flip to avoid flashing a
white screen.
- Depth used in context of the LogiCVC driver only counts color components
to match the definition of the synthesis parameters.
Support is implemented for both version 3 and 4 of the controller.
With version 3, framebuffers are stored in a dedicated contiguous
memory area, with a base address hardcoded for each layer. This requires
using a dedicated CMA pool registered at the base address and tweaking a
few offset-related registers to try to use any buffer allocated from
the pool. This is done on a best-effort basis to have the hardware cope
with the DRM framebuffer allocation model and there is no guarantee
that each buffer allocated by GEM CMA can be used for any layer.
In particular, buffers allocated below the base address for a layer are
guaranteed not to be configurable for that layer. See the implementation of
logicvc_layer_buffer_find_setup for specifics.
Version 4 allows configuring each buffer address directly, which
guarantees that any buffer can be configured.
fbdev: Disable sysfb device registration when removing conflicting FBs
The platform devices registered by sysfb match with firmware-based DRM or
fbdev drivers, that are used to have early graphics using a framebuffer
provided by the system firmware.
DRM or fbdev drivers later are probed and remove conflicting framebuffers,
leading to these platform devices for generic drivers to be unregistered.
But the current solution has a race, since the sysfb_init() function could
be called after a DRM or fbdev driver is probed and request to unregister
the devices for drivers with conflicting framebuffes.
To prevent this, disable any future sysfb platform device registration by
calling sysfb_disable(), if a driver requests to remove the conflicting
framebuffers.
drm/mgag200: Include <linux/vmalloc.h> for G200 BIOS code
After moving the vmalloc() call to another file, the rsp include
statement needs to be moved as well. Resolves a build warning on
parisc.
drivers/gpu/drm/mgag200/mgag200_g200.c: In function
'mgag200_g200_init_refclk':
drivers/gpu/drm/mgag200/mgag200_g200.c:120:16: error: implicit
declaration of function 'vmalloc'; did you mean 'kvmalloc'?
[-Werror=implicit-function-declaration]
Miaoqian Lin [Thu, 2 Jun 2022 10:42:22 +0000 (14:42 +0400)]
drm/virtio: Fix NULL vs IS_ERR checking in virtio_gpu_object_shmem_init
Since drm_prime_pages_to_sg() function return error pointers.
The drm_gem_shmem_get_sg_table() function returns error pointers too.
Using IS_ERR() to check the return value to fix this.
Vivek Kasireddy [Fri, 20 May 2022 20:52:35 +0000 (13:52 -0700)]
udmabuf: Set the DMA mask for the udmabuf device (v2)
If the DMA mask is not set explicitly, the following warning occurs
when the userspace tries to access the dma-buf via the CPU as
reported by syzbot here:
Xiaomeng Tong [Sun, 27 Mar 2022 05:09:45 +0000 (13:09 +0800)]
virtio-gpu: fix a missing check to avoid NULL dereference
'cache_ent' could be set NULL inside virtio_gpu_cmd_get_capset()
and it will lead to a NULL dereference by a lately use of it
(i.e., ptr = cache_ent->caps_cache). Fix it with a NULL check.
initmem_freed was removed in v2.1.124, and the underlying issue was
fixed for good in commit a65b279d3ed11df3 ("video/logo: prevent use of
logos after they have been freed").
Daniel Thompson [Wed, 8 Jun 2022 13:58:21 +0000 (14:58 +0100)]
drm/cma-helper: Describe what a "contiguous chunk" actually means
Since it's inception in 2012 it has been understood that the DRM GEM CMA
helpers do not depend on CMA as the backend allocator. In fact the first
bug fix to ensure the cma-helpers work correctly with an IOMMU backend
appeared in 2014. However currently the documentation for
drm_gem_cma_create() talks about "a contiguous chunk of memory" without
making clear which address space it will be a contiguous part of.
Additionally the CMA introduction is actively misleading because it only
contemplates the CMA backend.
This matters because when the device accesses the bus through an IOMMU
(and don't use the CMA backend) then the allocated memory is contiguous
only in the IOVA space. This is a significant difference compared to the
CMA backend and the behaviour can be a surprise even to someone who does
a reasonable level of code browsing (but doesn't find all the relevant
function pointers ;-) ).
Jason Ekstrand [Wed, 8 Jun 2022 15:21:42 +0000 (10:21 -0500)]
dma-buf: Add an API for importing sync files (v10)
This patch is analogous to the previous sync file export patch in that
it allows you to import a sync_file into a dma-buf. Unlike the previous
patch, however, this does add genuinely new functionality to dma-buf.
Without this, the only way to attach a sync_file to a dma-buf is to
submit a batch to your driver of choice which waits on the sync_file and
claims to write to the dma-buf. Even if said batch is a no-op, a submit
is typically way more overhead than just attaching a fence. A submit
may also imply extra synchronization with other work because it happens
on a hardware queue.
In the Vulkan world, this is useful for dealing with the out-fence from
vkQueuePresent. Current Linux window-systems (X11, Wayland, etc.) all
rely on dma-buf implicit sync. Since Vulkan is an explicit sync API, we
get a set of fences (VkSemaphores) in vkQueuePresent and have to stash
those as an exclusive (write) fence on the dma-buf. We handle it in
Mesa today with the above mentioned dummy submit trick. This ioctl
would allow us to set it directly without the dummy submit.
This may also open up possibilities for GPU drivers to move away from
implicit sync for their kernel driver uAPI and instead provide sync
files and rely on dma-buf import/export for communicating with other
implicit sync clients.
We make the explicit choice here to only allow setting RW fences which
translates to an exclusive fence on the dma_resv. There's no use for
read-only fences for communicating with other implicit sync userspace
and any such attempts are likely to be racy at best. When we got to
insert the RW fence, the actual fence we set as the new exclusive fence
is a combination of the sync_file provided by the user and all the other
fences on the dma_resv. This ensures that the newly added exclusive
fence will never signal before the old one would have and ensures that
we don't break any dma_resv contracts. We require userspace to specify
RW in the flags for symmetry with the export ioctl and in case we ever
want to support read fences in the future.
There is one downside here that's worth documenting: If two clients
writing to the same dma-buf using this API race with each other, their
actions on the dma-buf may happen in parallel or in an undefined order.
Both with and without this API, the pattern is the same: Collect all
the fences on dma-buf, submit work which depends on said fences, and
then set a new exclusive (write) fence on the dma-buf which depends on
said work. The difference is that, when it's all handled by the GPU
driver's submit ioctl, the three operations happen atomically under the
dma_resv lock. If two userspace submits race, one will happen before
the other. You aren't guaranteed which but you are guaranteed that
they're strictly ordered. If userspace manages the fences itself, then
these three operations happen separately and the two render operations
may happen genuinely in parallel or get interleaved. However, this is a
case of userspace racing with itself. As long as we ensure userspace
can't back the kernel into a corner, it should be fine.
v2 (Jason Ekstrand):
- Use a wrapper dma_fence_array of all fences including the new one
when importing an exclusive fence.
v3 (Jason Ekstrand):
- Lock around setting shared fences as well as exclusive
- Mark SIGNAL_SYNC_FILE as a read-write ioctl.
- Initialize ret to 0 in dma_buf_wait_sync_file
v4 (Jason Ekstrand):
- Use the new dma_resv_get_singleton helper
v5 (Jason Ekstrand):
- Rename the IOCTLs to import/export rather than wait/signal
- Drop the WRITE flag and always get/set the exclusive fence
v6 (Jason Ekstrand):
- Split import and export into separate patches
- New commit message
v7 (Daniel Vetter):
- Fix the uapi header to use the right struct in the ioctl
- Use a separate dma_buf_import_sync_file struct
- Add kerneldoc for dma_buf_import_sync_file
v8 (Jason Ekstrand):
- Rebase on Christian König's fence rework
v9 (Daniel Vetter):
- Fix -EINVAL checks for the flags parameter
- Add documentation about read/write fences
- Add documentation about the expected usage of import/export and
specifically call out the possible userspace race.
v10 (Simon Ser):
- Fix a typo in the docs
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com> Signed-off-by: Jason Ekstrand <jason.ekstrand@collabora.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220608152142.14495-3-jason@jlekstrand.net
Jason Ekstrand [Wed, 8 Jun 2022 15:21:41 +0000 (10:21 -0500)]
dma-buf: Add an API for exporting sync files (v14)
Modern userspace APIs like Vulkan are built on an explicit
synchronization model. This doesn't always play nicely with the
implicit synchronization used in the kernel and assumed by X11 and
Wayland. The client -> compositor half of the synchronization isn't too
bad, at least on intel, because we can control whether or not i915
synchronizes on the buffer and whether or not it's considered written.
The harder part is the compositor -> client synchronization when we get
the buffer back from the compositor. We're required to be able to
provide the client with a VkSemaphore and VkFence representing the point
in time where the window system (compositor and/or display) finished
using the buffer. With current APIs, it's very hard to do this in such
a way that we don't get confused by the Vulkan driver's access of the
buffer. In particular, once we tell the kernel that we're rendering to
the buffer again, any CPU waits on the buffer or GPU dependencies will
wait on some of the client rendering and not just the compositor.
This new IOCTL solves this problem by allowing us to get a snapshot of
the implicit synchronization state of a given dma-buf in the form of a
sync file. It's effectively the same as a poll() or I915_GEM_WAIT only,
instead of CPU waiting directly, it encapsulates the wait operation, at
the current moment in time, in a sync_file so we can check/wait on it
later. As long as the Vulkan driver does the sync_file export from the
dma-buf before we re-introduce it for rendering, it will only contain
fences from the compositor or display. This allows to accurately turn
it into a VkFence or VkSemaphore without any over-synchronization.
By making this an ioctl on the dma-buf itself, it allows this new
functionality to be used in an entirely driver-agnostic way without
having access to a DRM fd. This makes it ideal for use in driver-generic
code in Mesa or in a client such as a compositor where the DRM fd may be
hard to reach.
v2 (Jason Ekstrand):
- Use a wrapper dma_fence_array of all fences including the new one
when importing an exclusive fence.
v3 (Jason Ekstrand):
- Lock around setting shared fences as well as exclusive
- Mark SIGNAL_SYNC_FILE as a read-write ioctl.
- Initialize ret to 0 in dma_buf_wait_sync_file
v4 (Jason Ekstrand):
- Use the new dma_resv_get_singleton helper
v5 (Jason Ekstrand):
- Rename the IOCTLs to import/export rather than wait/signal
- Drop the WRITE flag and always get/set the exclusive fence
v6 (Jason Ekstrand):
- Drop the sync_file import as it was all-around sketchy and not nearly
as useful as import.
- Re-introduce READ/WRITE flag support for export
- Rework the commit message
v7 (Jason Ekstrand):
- Require at least one sync flag
- Fix a refcounting bug: dma_resv_get_excl() doesn't take a reference
- Use _rcu helpers since we're accessing the dma_resv read-only
v8 (Jason Ekstrand):
- Return -ENOMEM if the sync_file_create fails
- Predicate support on IS_ENABLED(CONFIG_SYNC_FILE)
v9 (Jason Ekstrand):
- Add documentation for the new ioctl
v10 (Jason Ekstrand):
- Go back to dma_buf_sync_file as the ioctl struct name
v11 (Daniel Vetter):
- Go back to dma_buf_export_sync_file as the ioctl struct name
- Better kerneldoc describing what the read/write flags do
v12 (Christian König):
- Document why we chose to make it an ioctl on dma-buf
v13 (Jason Ekstrand):
- Rebase on Christian König's fence rework
v14 (Daniel Vetter & Christian König):
- Use dma_rev_usage_rw to get the properly inverted usage to pass to
dma_resv_get_singleton()
- Clean up the sync_file and fd if copy_to_user() fails
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Jason Ekstrand <jason.ekstrand@intel.com> Signed-off-by: Jason Ekstrand <jason.ekstrand@collabora.com> Acked-by: Simon Ser <contact@emersion.fr> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20220608152142.14495-2-jason@jlekstrand.net
Systems with AST graphics can have multiple output; typically VGA
plus some other port. Record detected output chips in a bitmask and
initialize each output on its own.
Assume a VGA output by default and use SIL164 and DP501 if available.
For ASTDP assume that it can run in parallel with VGA.
Tested on AST2100.
v3:
* define a macro for each BIT(ast_tx_chip) (Patrik)
v2:
* make VGA/SIL164/DP501 mutually exclusive
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Fixes: 02e861909549 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Javier Martinez Canillas <javierm@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de
Bjorn Andersson [Wed, 1 Jun 2022 23:38:18 +0000 (16:38 -0700)]
drm/bridge: lt9611uxc: Cancel only driver's work
During device remove care needs to be taken that no work is pending
before it removes the underlying DRM bridge etc, but this can be done on
the specific work rather than waiting for the flush of the system-wide
workqueue.
Miaoqian Lin [Wed, 1 Jun 2022 03:39:27 +0000 (07:39 +0400)]
drm/meson: encoder_hdmi: Fix refcount leak in meson_encoder_hdmi_init
of_graph_get_remote_node() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Miaoqian Lin [Wed, 1 Jun 2022 03:39:26 +0000 (07:39 +0400)]
drm/meson: encoder_cvbs: Fix refcount leak in meson_encoder_cvbs_init
of_graph_get_remote_node() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 5d4774fcb39f ("drm/meson: encoder_cvbs: switch to bridge with ATTACH_NO_CONNECTOR") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220601033927.47814-2-linmq006@gmail.com
Set new vidrst flag in device info for models that synchronize with
external sources (i.e., BMCs). In modesetting, set the corresponding
bits from the device-info flag.
drm/mgag200: Store maximum resolution and memory bandwidth in device info
The maximum resolution and memory bandwidth are model-specific limits.
Both are used during display-mode validation. Store the values in struct
mgag200_device_info and simplify the validation code.
drm/mgag200: Store HW_BUG_NO_STARTADD flag in device info
Flag devices with broken handling of the startadd field in
struct mgag200_device_info, instead of PCI driver data. This
reduces the driver data to a simple type constant.
Rework mgag200_regs_init() and mgag200_mm_init() into device preinit
and init functions. The preinit function, mgag200_device_preinit(),
requests and maps a device's I/O and video memory. The init function,
mgag200_device_init() initializes the state of struct mga_device.
Splitting the initialization between the two functions is necessary
to perform per-model operations between the two calls, such as reading
the unique revision ID on G200SEs.
drm/mgag200: Move PCI-option setup into model-specific code
Split the PCI code into a single call for each model. G200 and G200SE
each contain a dedicated helper with additional instructions. Noteably,
the G200ER has no code for PCI setup.
In a later patch, the magic numbers should be replaced by descriptive
constants.
drm/mgag200: Remove special case for G200SE with <2 MiB
Remove old test for 32-bit vs 16-bit colors. Prefer 24-bit color depth
on all devices. 32-bit color depth doesn't exist, it should have always
been 24-bit.
G200SE with less than 2 MiB of video memory have defaulted to 16-bit
color depth, as the original revision of the G200SE had only 1.75 MiB
of video memory. Using 16-bit colors enabled XGA resolution. But we
now already limit these devices to VGA resolutions as the memory-bandwith
test assumes 32-bit pixel size. So drop the special case from color-depth
selection.
drm/probe-helper: Default to 640x480 if no EDID on DP
If we're unable to read the EDID for a display because it's corrupt /
bogus / invalid then we'll add a set of standard modes for the
display. Since we have no true information about the connected
display, these modes are essentially guesses but better than nothing.
At the moment, none of the modes returned is marked as preferred, but
the modes are sorted such that the higher resolution modes are listed
first.
When userspace sees these modes presented by the kernel it needs to
figure out which one to pick. At least one userspace, ChromeOS [1]
seems to use the rules (which seem pretty reasonable):
1. Try to pick the first mode marked as preferred.
2. Try to pick the mode which matches the first detailed timing
descriptor in the EDID.
3. If no modes were marked as preferred then pick the first mode.
Unfortunately, userspace's rules combined with what the kernel is
doing causes us to fail section 4.2.2.6 (EDID Corruption Detection) of
the DP 1.4a Link CTS. That test case says that, while it's OK to allow
some implementation-specific fall-back modes if the EDID is bad that
userspace should _default_ to 640x480.
Let's fix this by marking 640x480 as default for DP in the no-EDID
case.
NOTES:
- In the discussion around v3 of this patch [2] there was talk about
solving this in userspace and I even implemented a patch that would
have solved this for ChromeOS, but then the discussion turned back
to solving this in the kernel.
- Also in the discussion of v3 [2] it was requested to limit this
change to just DP since folks were worried that it would break some
subtle corner case on VGA or HDMI.
Timur Tabi [Wed, 11 May 2022 16:37:16 +0000 (11:37 -0500)]
drm/nouveau: fix another off-by-one in nvbios_addr
This check determines whether a given address is part of
image 0 or image 1. Image 1 starts at offset image0_size,
so that address should be included.
Fixes: a5fc52e4bf667 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Timur Tabi <ttabi@nvidia.com> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220511163716.3520591-1-ttabi@nvidia.com
Douglas Anderson [Tue, 10 May 2022 19:29:44 +0000 (12:29 -0700)]
drm/bridge: parade-ps8640: Handle DP AUX more properly
While it works, for the most part, to assume that the panel has
finished probing when devm_of_dp_aux_populate_ep_devices() returns,
it's a bit fragile. This is talked about at length in commit 0f27f5316c50 ("drm/bridge: ti-sn65dsi86: Promote the AUX channel to
its own sub-dev").
When reviewing the ps8640 code, I managed to convince myself that it
was OK not to worry about it there and that maybe it wasn't really
_that_ fragile. However, it turns out that it really is. Simply
hardcoding panel_edp_probe() to return -EPROBE_DEFER was enough to put
the boot process into an infinite loop. I believe this manages to trip
the same issues that we used to trip with the main MSM code where
something about our actions trigger Linux to re-probe previously
deferred devices right away and each time we try again we re-trigger
Linux to re-probe.
Let's fix this using the callback introduced in the patch ("drm/dp:
Callbacks to make it easier for drivers to use DP AUX bus properly").
When using the new callback, we have to be a little careful. The
probe_done() callback is no longer always called in the context of
our probe routine. That means we can't rely on being able to return
-EPROBE_DEFER from it. We re-jigger the order of things a bit to
account for that.
With this change, the device still boots (though obviously the panel
doesn't come up) if I force panel-edp to always return
-EPROBE_DEFER. If I fake it and make the panel probe exactly once it
also works.
Douglas Anderson [Tue, 10 May 2022 19:29:43 +0000 (12:29 -0700)]
drm/bridge: Add devm_drm_bridge_add()
This adds a devm managed version of drm_bridge_add(). Like other
"devm" function listed in drm_bridge.h, this function takes an
explicit "dev" to use for the lifetime management. A few notes:
* In general we have a "struct device" for bridges that makes a good
candidate for where the lifetime matches exactly what we want.
* The "bridge->dev->dev" device appears to be the encoder
device. That's not the right device to use for lifetime management.
Douglas Anderson [Tue, 10 May 2022 19:29:42 +0000 (12:29 -0700)]
drm/dp: Add callbacks to make using DP AUX bus properly easier
As talked about in this patch in the kerneldoc of
of_dp_aux_populate_ep_device() and also in the past in commit 0f27f5316c50 ("drm/bridge: ti-sn65dsi86: Promote the AUX channel to
its own sub-dev"), it can be difficult for eDP controller drivers to
know when the panel has finished probing when they're using
of_dp_aux_populate_ep_devices().
The ti-sn65dsi86 driver managed to solve this because it was already
broken up into a bunch of sub-drivers. That means we could solve the
problem there by adding a new sub-driver to get the panel. We could
use the traditional -EPROBE_DEFER retry mechansim to handle the case
where the panel hadn't probed yet.
In parade-ps8640 we didn't really solve this. The code just expects
the panel to be ready right away. While reviewing the code originally
I had managed to convince myself it was fine to just expect the panel
right away, but additional testing has shown that not to be the
case. We could fix parade-ps8640 like we did ti-sn65dsi86 but it's
pretty cumbersome (since we're not already broken into multiple
drivers) and requires a bunch of boilerplate code.
After discussion [1] it seems like the best solution for most people
is:
- Accept that there's always at most one device that will probe as a
result of the DP AUX bus (it may have sub-devices, but there will be
one device _directly_ probed).
- When that device finishes probing, we can just have a call back.
This patch implements that idea. We'll now take a callback as an
argument to the populate function. To make this easier to land in
pieces, we'll make wrappers for the old functions. The functions with
the new name (which make it clear that we only have one child) will
take the callback and the functions with the old name will temporarily
wrap.
drm/gma500: Read EDID from the correct i2c adapter
Someone made the mistake to try reading EDID from the backlight i2c
adapter. This has been wrong for a very long time but since we read out
the modes correctly on init and don't hotplug lvds it has been working
anyway. Correct this by using connector->ddc instead of
encoder->i2c_bus. Both PSB and CDV are affected but this bug.
drm/gma500: Make oaktrail lvds use ddc adapter from drm_connector
We're moving all uses of ddc_bus to drm_connector where they belong.
The initialization of the gma_i2c_chan for Oaktrail is a bit backwards
so it required improvements. Also cleanup the error handling in
oaktrail_lvds_init(). Since this is the last user of
gma_encoder->ddc_bus we can remove it.
drm/gma500: Make psb lvds use ddc adapter from drm_connector
We're moving all uses of ddc_bus to drm_connector where they belong.
Also cleanup the error handling in psb_intel_lvds_init() and remove
unused ddc_bus in psb_intel_lvds_priv.
drm/gma500: Make cdv hdmi use ddc adapter from drm_connector
We're moving all uses of ddc_bus from gma_encoder to drm_connector where
they belong. Also, cleanup the error handling in cdv_hdmi_init()
and remove unused i2c pointer in mid_intel_hdmi_priv.
drm/gma500: Make cdv lvds use ddc adapter from drm_connector
We're moving all uses of ddc_bus to drm_connector where they belong.
Also, add missing call to destroy ddc bus when destroying the connector
and cleanup the error handling in cdv_intel_lvds_init().
drm/ssd130x: Only define a SPI device ID table when built as a module
The kernel test robot reports a compile warning due the ssd130x_spi_table
variable being defined but not used. This happen when ssd130x-spi driver
is built-in instead of being built as a module, i.e:
CC drivers/gpu/drm/solomon/ssd130x-spi.o
AR drivers/base/firmware_loader/built-in.a
AR drivers/base/built-in.a
CC kernel/trace/trace.o
drivers/gpu/drm/solomon/ssd130x-spi.c:155:35: warning: ‘ssd130x_spi_table’ defined but not used [-Wunused-const-variable=]
155 | static const struct spi_device_id ssd130x_spi_table[] = {
| ^~~~~~~~~~~~~~~~~
The driver shouldn't need a SPI device ID table and only have an OF device
ID table, but the former is needed to workaround an issue in the SPI core.
This always reports a MODALIAS of the form "spi:<device>" even for devices
registered through Device Trees.
But the table is only needed when the driver built as a module to populate
the .ko alias info. It's not needed when the driver is built-in the kernel.
Saurabh Sengar [Sat, 21 May 2022 14:23:39 +0000 (07:23 -0700)]
drm/hyperv : Removing the restruction of VRAM allocation with PCI bar size
There were two different approaches getting used in this driver to
allocate vram:
1. VRAM allocation from PCI region for Gen1
2. VRAM alloaction from MMIO region for Gen2
First approach limilts the vram to PCI BAR size, which is 64 MB in most
legacy systems. This limits the maximum resolution to be restricted to
64 MB size, and with recent conclusion on fbdev issue its concluded to have
similar allocation strategy for both Gen1 and Gen2. This patch unifies
the Gen1 and Gen2 vram allocation strategy.
Christian König [Mon, 25 Apr 2022 12:22:12 +0000 (14:22 +0200)]
dma-buf: generalize dma_fence unwrap & merging v3
Introduce a dma_fence_unwrap_merge() macro which allows to unwrap fences
which potentially can be containers as well and then merge them back
together into a flat dma_fence_array.
v2: rename the function, add some more comments about how the wrapper is
used, move filtering of signaled fences into the unwrap iterator,
add complex selftest which covers more cases.
v3: fix signaled fence filtering once more
Yunhao Tian [Tue, 10 May 2022 03:02:19 +0000 (11:02 +0800)]
drm/mipi-dbi: align max_chunk to 2 in spi_transfer
In __spi_validate, there's a validation that no partial transfers
are accepted (xfer->len % w_size must be zero). When
max_chunk is not a multiple of bpw (e.g. max_chunk = 65535,
bpw = 16), the transfer will be rejected.
This patch aligns max_chunk to 2 bytes (the maximum value of bpw is 16),
so that no partial transfer will occur.
projects / kernel.git / log