Hu Xiaoying [Thu, 1 Sep 2022 04:57:37 +0000 (12:57 +0800)]
usb: storage: Add ASUS <0x0b05:0x1932> to IGNORE_UAS
USB external storage device(0x0b05:1932), use gnome-disk-utility tools
to test usb write < 30MB/s.
if does not to load module of uas for this device, can increase the
write speed from 20MB/s to >40MB/s.
Suggested-by: Matthias Kaehlcke <mka@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hu Xiaoying <huxiaoying@kylinos.cn> Link: https://lore.kernel.org/r/20220901045737.3438046-1-huxiaoying@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'usb-serial-6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.0-rc4
Here are a couple of fixes for two long-standing issues with some older
ch341 devices and a number of new device ids.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.0-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: ch341: fix disabled rx timer on older devices
USB: serial: ch341: fix lost character on LCR updates
USB: serial: cp210x: add Decagon UCA device id
USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode
USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id
USB: serial: option: add Quectel EM060K modem
USB: serial: option: add support for OPPO R11 diag port
Johan Hovold [Wed, 31 Aug 2022 08:15:25 +0000 (10:15 +0200)]
USB: serial: ch341: fix disabled rx timer on older devices
At least one older CH341 appears to have the RX timer enable bit
inverted so that setting it disables the RX timer and prevents the FIFO
from emptying until it is full.
Only set the RX timer enable bit for devices with version newer than
0x27 (even though this probably affects all pre-0x30 devices).
Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
Johan Hovold [Wed, 31 Aug 2022 08:15:24 +0000 (10:15 +0200)]
USB: serial: ch341: fix lost character on LCR updates
Disable LCR updates for pre-0x30 devices which use a different (unknown)
protocol for line control and where the current register write causes
the next received character to be lost.
Note that updating LCR using the INIT command has no effect on these
devices either.
Reported-by: Jonathan Woithe <jwoithe@just42.net> Tested-by: Jonathan Woithe <jwoithe@just42.net> Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold <johan@kernel.org>
Pawel Laszczak [Thu, 25 Aug 2022 06:21:37 +0000 (08:21 +0200)]
usb: cdns3: fix issue with rearming ISO OUT endpoint
ISO OUT endpoint is enabled during queuing first usb request
in transfer ring and disabled when TRBERR is reported by controller.
After TRBERR and before next transfer added to TR driver must again
reenable endpoint but does not.
To solve this issue during processing TRBERR event driver must
set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field.
Pawel Laszczak [Thu, 25 Aug 2022 06:22:07 +0000 (08:22 +0200)]
usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer
The TRB_SMM flag indicates that DMA has completed the TD service with
this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for
bInterval > 1 each ISOC transfer contains more than one TD associated
with usb request (one TD per ITP). In such case the TRB_SMM flag will
be set in every TD and driver will recognize the end of transfer after
processing the first TD with TRB_SMM. In result driver stops updating
request->actual and returns incorrect actual length.
To fix this issue driver additionally must check TRB_CHAIN which is not
used for isochronous transfers.
Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly")
cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062207.5824-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krishna Kurapati [Sat, 27 Aug 2022 03:15:10 +0000 (08:45 +0530)]
usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS
During cdrom emulation, the response to read_toc command must contain
the cdrom address as the number of sectors (2048 byte sized blocks)
represented either as an absolute value (when MSF bit is '0') or in
terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of
cdrom, the fsg_lun_open call sets the sector size to 2048 bytes.
When MAC OS sends a read_toc request with MSF set to '1', the
store_cdrom_address assumes that the address being provided is the
LUN size represented in 512 byte sized blocks instead of 2048. It
tries to modify the address further to convert it to 2048 byte sized
blocks and store it in MSF format. This results in data transfer
failures as the cdrom address being provided in the read_toc response
is incorrect.
The reason for the warning is clear enough; the driver sends an
unusual read request on endpoint 0 but does not set the USB_DIR_IN bit
in the bRequestType field.
More importantly, the whole situation can be avoided and the driver
simplified by converting it over to the relatively new
usb_control_msg_recv() and usb_control_msg_send() routines. That's
what this fix does.
This turned out not to be an error in usb-storage but rather a nested
device reset attempt. That is, as the rtl8712 driver was being
unbound from a composite device in preparation for an unrelated USB
reset (that driver does not have pre_reset or post_reset callbacks),
its ->remove routine called usb_reset_device() -- thus nesting one
reset call within another.
Performing a reset as part of disconnect processing is a questionable
practice at best. However, the bug report points out that the USB
core does not have any protection against nested resets. Adding a
reset_in_progress flag and testing it will prevent such errors in the
future.
Alan Stern [Fri, 26 Aug 2022 19:31:17 +0000 (15:31 -0400)]
USB: gadget: Fix obscure lockdep violation for udc_mutex
A recent commit expanding the scope of the udc_lock mutex in the
gadget core managed to cause an obscure and slightly bizarre lockdep
violation. In abbreviated form:
======================================================
WARNING: possible circular locking dependency detected
5.19.0-rc7+ #12510 Not tainted
------------------------------------------------------
udevadm/312 is trying to acquire lock: ffff80000aae1058 (udc_lock){+.+.}-{3:3}, at: usb_udc_uevent+0x54/0xe0
but task is already holding lock: ffff000002277548 (kn->active#4){++++}-{0:0}, at: kernfs_seq_start+0x34/0xe0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
Evidently this was caused by the scope of udc_mutex being too large.
The mutex is only meant to protect udc->driver along with a few other
things. As far as I can tell, there's no reason for the mutex to be
held while the gadget core calls a gadget driver's ->bind or ->unbind
routine, or while a UDC is being started or stopped. (This accounts
for link #1 in the chain above, where the mutex is held while the
dwc2_hsotg_udc is started as part of driver probing.)
Gadget drivers' ->disconnect callbacks are problematic. Even though
usb_gadget_disconnect() will now acquire the udc_mutex, there's a
window in usb_gadget_bind_driver() between the times when the mutex is
released and the ->bind callback is invoked. If a disconnect occurred
during that window, we could call the driver's ->disconnect routine
before its ->bind routine. To prevent this from happening, it will be
necessary to prevent a UDC from connecting while it has no gadget
driver. This should be done already but it doesn't seem to be;
currently usb_gadget_connect() has no check for this. Such a check
will have to be added later.
Some degree of mutual exclusion is required in soft_connect_store(),
which can dereference udc->driver at arbitrary times since it is a
sysfs callback. The solution here is to acquire the gadget's device
lock rather than the udc_mutex. Since the driver core guarantees that
the device lock is always held during driver binding and unbinding,
this will make the accesses in soft_connect_store() mutually exclusive
with any changes to udc->driver.
Lastly, it turns out there is one place which should hold the
udc_mutex but currently does not: The function_show() routine needs
protection while it dereferences udc->driver. The missing lock and
unlock calls are added.
Heiner Kallweit [Tue, 23 Aug 2022 17:58:42 +0000 (19:58 +0200)]
usb: dwc2: fix wrong order of phy_power_on and phy_init
Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before
phy_init") the driver complains. In my case (Amlogic SoC) the warning
is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init
So change the order of the two calls. The same change has to be done
to the order of phy_exit() and phy_power_off().
Piyush Mehta [Wed, 24 Aug 2022 07:12:53 +0000 (12:42 +0530)]
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
For ARM processor, unaligned access to device memory is not allowed.
Method memcpy does not take care of alignment.
USB detection failure with the unaligned address of memory access, with
below kernel crash. To fix the unaligned address the kernel panic issue,
replace memcpy with memcpy_toio method.
Johan Hovold [Thu, 25 Aug 2022 13:18:36 +0000 (15:18 +0200)]
usb: dwc3: disable USB core PHY management
The dwc3 driver manages its PHYs itself so the USB core PHY management
needs to be disabled.
Use the struct xhci_plat_priv hack added by commits 46034a999c07 ("usb:
host: xhci-plat: add platform data support") and f768e718911e ("usb:
host: xhci-plat: add priv quirk for skip PHY initialization") to
propagate the setting for now.
Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Fixes: 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Tested-by: Matthias Kaehlcke <mka@chromium.org> Cc: stable <stable@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220825131836.19769-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers:
17ef:1018 upstream
17ef:1019 downstream
Those two controllers both have problems with some USB3.0 devices,
particularly self-powered ones. Typical error messages include:
Timeout while waiting for setup device command
device not accepting address X, error -62
unable to enumerate USB device
By process of elimination the controllers themselves were identified as
the cause of the problem. Through trial and error the issue was solved
by using USB_QUIRK_RESET_RESUME for both chips.
Signed-off-by: Yonglin Tan <yonglin.tan@outlook.com>
[ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
Turning off port power in shutdown did cause issues such as a laptop not
proprly powering off, and some specific usb devies failing to enumerate the
subsequent boot after a warm reset.
Mathias Nyman [Thu, 25 Aug 2022 15:08:39 +0000 (18:08 +0300)]
xhci: Add grace period after xHC start to prevent premature runtime suspend.
After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.
It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.
In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.
If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.
So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.
Takashi Iwai [Tue, 23 Aug 2022 06:54:55 +0000 (08:54 +0200)]
Revert "usb: typec: ucsi: add a common function ucsi_unregister_connectors()"
The recent commit 87d0e2f41b8c ("usb: typec: ucsi: add a common
function ucsi_unregister_connectors()") introduced a regression that
caused NULL dereference at reading the power supply sysfs. It's a
stale sysfs entry that should have been removed but remains with NULL
ops. The commit changed the error handling to skip the entries after
a NULL con->wq, and this leaves the power device unreleased.
For addressing the regression, the straight revert is applied here.
Further code improvements can be done from the scratch again.
Johan Hovold [Mon, 22 Aug 2022 10:05:50 +0000 (12:05 +0200)]
usb: dwc3: qcom: suppress unused-variable warning
The dwc3_qcom_read_usb2_speed() helper is now only called when the
controller is acting as host, but the compiler will warn that the hcd
variable is unused in gadget-only W=1 builds.
Merge tag 'thunderbolt-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
"thunderbolt: Fixes for v6.0-rc3
This includes two fixes: one that corrects the buffer usage in
tb_async_error() and another one that limits the xHCI connect operations
to Thunderbolt 3 routers.
Both have been in linux-next with no reported issues."
* tag 'thunderbolt-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Check router generation before connecting xHCI
thunderbolt: Use the actual buffer in tb_async_error()
On page 362 of the USB3.2 specification (
https://usb.org/sites/default/files/usb_32_20210125.zip),
The 'SuperSpeed Endpoint Companion Descriptor' shall only be returned
by Enhanced SuperSpeed devices that are operating at Gen X speed.
Each endpoint described in an interface is followed by a 'SuperSpeed
Endpoint Companion Descriptor'.
If users use SuperSpeed UDC, host can't recognize the device if endpoint
doesn't have 'SuperSpeed Endpoint Companion Descriptor' followed.
Currently in the uac2 driver code:
1. ss_epout_desc_comp follows ss_epout_desc;
2. ss_epin_fback_desc_comp follows ss_epin_fback_desc;
3. ss_epin_desc_comp follows ss_epin_desc;
4. Only ss_ep_int_desc endpoint doesn't have 'SuperSpeed Endpoint
Companion Descriptor' followed, so we should add it.
Chunfeng Yun [Fri, 19 Aug 2022 08:05:56 +0000 (16:05 +0800)]
usb: xhci-mtk: fix bandwidth release issue
This happens when @udev->reset_resume is set to true, when usb resume,
the flow as below:
- hub_resume
- usb_disable_interface
- usb_disable_endpoint
- usb_hcd_disable_endpoint
- xhci_endpoint_disable // it set @ep->hcpriv to NULL
Then when reset usb device, it will drop allocated endpoints,
the flow as below:
- usb_reset_and_verify_device
- usb_hcd_alloc_bandwidth
- xhci_mtk_drop_ep
but @ep->hcpriv is already set to NULL, the bandwidth will be not
released anymore.
Due to the added endponts are stored in hash table, we can drop the check
of @ep->hcpriv.
Fixes: 4ce186665e7c ("usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint") Cc: stable <stable@kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220819080556.32215-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently uses the worst case byte budgets on FS/LS bus bandwidth,
for example, for an isochronos IN endpoint with 192 bytes budget, it
will consume the whole 5 uframes(188 * 5) while the actual FS bus
budget should be just 192 bytes. It cause that many usb audio headsets
with 3 interfaces (audio input, audio output, and HID) cannot be
configured.
To improve it, changes to use "approximate" best case budget for FS/LS
bandwidth management. For the same endpoint from the above example,
the approximate best case budget is now reduced to (188 * 2) bytes.
Pablo Sun [Thu, 4 Aug 2022 03:48:03 +0000 (11:48 +0800)]
usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles
Fix incorrect pin assignment values when connecting to a monitor with
Type-C receptacle instead of a plug.
According to specification, an UFP_D receptacle's pin assignment
should came from the UFP_D pin assignments field (bit 23:16), while
an UFP_D plug's assignments are described in the DFP_D pin assignments
(bit 15:8) during Mode Discovery.
For example the LG 27 UL850-W is a monitor with Type-C receptacle.
The monitor responds to MODE DISCOVERY command with following
DisplayPort Capability flag:
dp->alt->vdo=0x140045
The existing logic only take cares of UPF_D plug case,
and would take the bit 15:8 for this 0x140045 case.
This results in an non-existing pin assignment 0x0 in
dp_altmode_configure.
To fix this problem a new set of macros are introduced
to take plug/receptacle differences into consideration.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by: Pablo Sun <pablo.sun@mediatek.com> Co-developed-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Guillaume Ranquet <granquet@baylibre.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Pablo Sun <pablo.sun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: misc: onboard_usb_hub: Drop reset delay in onboard_hub_power_off()
onboard_hub_power_off() currently has a delay after asserting the
reset of the hub. There is already a delay in onboard_hub_power_on()
before de-asserting the reset, which ensures that the reset is
asserted for the required time, so the delay in _power_off() is not
needed.
Skip the reset GPIO check before calling gpiod_set_value_cansleep(),
the function returns early when the GPIO descriptor is NULL.
usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop
Relocate the pullups_connected check until after it is ensured that there
are no runtime PM transitions. If another context triggered the DWC3
core's runtime resume, it may have already enabled the Run/Stop. Do not
re-run the entire pullup sequence again, as it may issue a core soft
reset while Run/Stop is already set.
This patch depends on
commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()")
Heikki Krogerus [Mon, 15 Aug 2022 12:33:34 +0000 (15:33 +0300)]
usb: dwc3: pci: Add support for Intel Raptor Lake
This adds the necessary PCI device ID for the controller
inside the Intel Raptor Lake CPU block. The controllers that
are part of the PCH (chipset) have separate device IDs.
Utkarsh Patel [Tue, 16 Aug 2022 10:16:24 +0000 (13:16 +0300)]
usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device
This adds the necessary ACPI ID for Intel Meteor Lake
IOM devices.
The callback function is_memory() is modified so that it
also checks if the resource descriptor passed to it is a
memory type "Address Space Resource Descriptor".
On Intel Meteor Lake the ACPI memory resource is not
described using the "32-bit Memory Range Descriptor" because
the memory is outside of the 32-bit address space. The
memory resource is described using the "Address Space
Resource Descriptor" instead.
Intel Meteor Lake is the first platform to describe the
memory resource for this device with Address Space Resource
Descriptor, but it most likely will not be the last.
Therefore the change to the is_memory() callback function
is made generic.
Johan Hovold [Thu, 4 Aug 2022 15:10:00 +0000 (17:10 +0200)]
usb: dwc3: qcom: fix wakeup implementation
It is the Qualcomm glue wakeup interrupts that may be able to wake the
system from suspend and this can now be described in the devicetree.
Move the wakeup-source property handling over from the core driver and
instead propagate the capability setting to the core device during
probe.
This is needed as there is currently no way for the core driver to query
the wakeup setting of the glue device, but it is the core driver that
manages the PHY power state during suspend.
Also don't leave the PHYs enabled when system wakeup has been disabled
through sysfs.
Johan Hovold [Thu, 4 Aug 2022 15:09:58 +0000 (17:09 +0200)]
usb: dwc3: qcom: fix peripheral and OTG suspend
A recent commit implementing wakeup support in host mode instead broke
suspend for peripheral and OTG mode.
The hack that was added in the suspend path to determine the speed of
any device connected to the USB2 bus not only accesses internal driver
data for a child device, but also dereferences a NULL pointer or
accesses freed data when the controller is not acting as host.
There's no quick fix to the layering violation, but since reverting
would leave us with broken suspend in host mode with wakeup triggering
immediately, let's keep the hack for now.
Fix the immediate issues by only checking the host bus speed and
enabling wakeup interrupts when acting as host.
Fixes: 6895ea55c385 ("usb: dwc3: qcom: Configure wakeup interrupts during suspend") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-7-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Thu, 4 Aug 2022 15:09:56 +0000 (17:09 +0200)]
usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup
The Qualcomm dwc3 runtime-PM implementation checks the xhci
platform-device pointer in the wakeup-interrupt handler to determine
whether the controller is in host mode and if so triggers a resume.
After a role switch in OTG mode the xhci platform-device would have been
freed and the next wakeup from runtime suspend would access the freed
memory.
Note that role switching is executed from a freezable workqueue, which
guarantees that the pointer is stable during suspend.
Also note that runtime PM has been broken since commit 2664deb09306
("usb: dwc3: qcom: Honor wakeup enabled/disabled state"), which
incidentally also prevents this issue from being triggered.
Generic power-domain flags must be set before the power-domain is
initialised and must specifically not be modified by drivers for devices
that happen to be in the domain.
To make sure that USB power-domains are left enabled during system
suspend when a device in the domain is in the wakeup path, the
GENPD_FLAG_ACTIVE_WAKEUP flag should instead be set for the domain
unconditionally when it is registered.
Note that this also avoids keeping power-domains on during suspend when
wakeup has not been enabled (e.g. through sysfs).
For the runtime PM case, making sure that the PHYs are not suspended and
that they are in the same domain as the controller prevents the domain
from being suspended. If there are cases where this is not possible or
desirable, the genpd implementation may need to be extended.
Fixes: d9be8d5c5b03 ("usb: dwc3: qcom: Keep power domain on to retain controller status") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb: typec: tcpm: Return ENOTSUPP for power supply prop writes
When the port does not support USB PD, prevent transition to PD
only states when power supply property is written. In this case,
TCPM transitions to SNK_NEGOTIATE_CAPABILITIES
which should not be the case given that the port is not pd_capable.
Arnd Bergmann [Thu, 18 Aug 2022 13:57:20 +0000 (15:57 +0200)]
musb: fix USB_MUSB_TUSB6010 dependency
Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because
of an older issue with the depencency.
It is not necessary to forbid NOP_USB_XCEIV=y in combination with
USB_MUSB_HDRC=m, but only the reverse, which causes the link failure
from the original Kconfig change.
Use the correct dependency to still allow NOP_USB_XCEIV=n or
NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m
to fix the multi_v7_defconfig for tusb.
Mika Westerberg [Tue, 14 Jun 2022 15:53:59 +0000 (18:53 +0300)]
thunderbolt: Check router generation before connecting xHCI
Only Thunderbolt 3 routers need the xHCI connection flow. This also
ensures the router actually has both lane adapters (1 and 3). While
there move declaration of the boolean variables inside the block where
they are being used.
Fixes: 30a4eca69b76 ("thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Mika Westerberg [Fri, 29 Apr 2022 14:10:17 +0000 (17:10 +0300)]
thunderbolt: Use the actual buffer in tb_async_error()
The received notification packet is held in pkg->buffer and not in pkg
itself. Fix this by using the correct buffer.
Fixes: 81a54b5e1986 ("thunderbolt: Let the connection manager handle all notifications") Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Yury Norov [Fri, 12 Aug 2022 05:34:25 +0000 (22:34 -0700)]
radix-tree: replace gfp.h inclusion with gfp_types.h
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com> CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Aug 2022 20:03:53 +0000 (13:03 -0700)]
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
Linus Torvalds [Sun, 14 Aug 2022 16:22:11 +0000 (09:22 -0700)]
Merge tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
Linus Torvalds [Sun, 14 Aug 2022 15:48:13 +0000 (08:48 -0700)]
Merge tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
Linus Torvalds [Sun, 14 Aug 2022 00:31:18 +0000 (17:31 -0700)]
Merge tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- two fixes for stable, one for a lock length miscalculation, and
another fixes a lease break timeout bug
- improvement to handle leases, allows the close timeout to be
configured more safely
- five restructuring/cleanup patches
* tag '5.20-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Do not access tcon->cfids->cfid directly from is_path_accessible
cifs: Add constructor/destructors for tcon->cfid
SMB3: fix lease break timeout when multiple deferred close handles for the same file.
smb3: allow deferred close timeout to be configurable
cifs: Do not use tcon->cfid directly, use the cfid we get from open_cached_dir
cifs: Move cached-dir functions into a separate file
cifs: Remove {cifs,nfs}_fscache_release_page()
cifs: fix lock length calculation
David Howells [Wed, 10 Aug 2022 17:52:47 +0000 (18:52 +0100)]
afs: Enable multipage folio support
Enable multipage folio support for the afs filesystem.
Support has already been implemented in netfslib, fscache and cachefiles
and in most of afs, but I've waited for Matthew Wilcox's latest folio
changes.
Note that it does require a change to afs_write_begin() to return the
correct subpage. This is a "temporary" change as we're working on
getting rid of the need for ->write_begin() and ->write_end()
completely, at least as far as network filesystems are concerned - but
it doesn't prevent afs from making use of the capability.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org> Tested-by: kafs-testing@auristor.com Cc: Marc Dionne <marc.dionne@auristor.com> Cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/lkml/2274528.1645833226@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 13 Aug 2022 21:38:22 +0000 (14:38 -0700)]
Merge tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Misc timer fixes:
- fix a potential use-after-free bug in posix timers
- correct a prototype
- address a build warning"
* tag 'timers-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Cleanup CPU timers before freeing them during exec
time: Correct the prototype of ns_to_kernel_old_timeval and ns_to_timespec64
posix-timers: Make do_clock_gettime() static
Linus Torvalds [Sat, 13 Aug 2022 21:24:12 +0000 (14:24 -0700)]
Merge tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix the 'IBPB mitigated RETBleed' mode of operation on AMD CPUs (not
turned on by default), which also need STIBP enabled (if available) to
be '100% safe' on even the shortest speculation windows"
* tag 'x86-urgent-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Enable STIBP for IBPB mitigated RETBleed
Linus Torvalds [Sat, 13 Aug 2022 21:00:45 +0000 (14:00 -0700)]
Merge tag 'ntb-5.20' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Non-Transparent Bridge updates.
Fix of heap data and clang warnings, support for a new Intel NTB
device, and NTB EndPoint Function (EPF) support and the various fixes
for that"
* tag 'ntb-5.20' of https://github.com/jonmason/ntb:
MAINTAINERS: add PCI Endpoint NTB drivers to NTB files
NTB: EPF: Tidy up some bounds checks
NTB: EPF: Fix error code in epf_ntb_bind()
PCI: endpoint: pci-epf-vntb: reduce several globals to statics
PCI: endpoint: pci-epf-vntb: fix error handle in epf_ntb_mw_bar_init()
PCI: endpoint: Fix Kconfig dependency
NTB: EPF: set pointer addr to null using NULL rather than 0
Documentation: PCI: extend subheading underline for "lspci output" section
Documentation: PCI: Use code-block block for scratchpad registers diagram
Documentation: PCI: Add specification for the PCI vNTB function device
PCI: endpoint: Support NTB transfer between RC and EP
NTB: epf: Allow more flexibility in the memory BAR map method
PCI: designware-ep: Allow pci_epc_set_bar() update inbound map address
ntb: intel: add GNR support for Intel PCIe gen5 NTB
NTB: ntb_tool: uninitialized heap data in tool_fn_write()
ntb: idt: fix clang -Wformat warnings
Linus Torvalds [Sat, 13 Aug 2022 20:50:11 +0000 (13:50 -0700)]
Merge tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"There's not a lot this time around, just the usual bug fixes and
corrections for missing error returns.
- Return error codes from block device flushes to userspace
- Fix a deadlock between reclaim and mount time quotacheck
- Fix an unnecessary ENOSPC return when doing COW on a filesystem
with severe free space fragmentation
- Fix a miscalculation in the transaction reservation computations
for file removal operations"
* tag 'xfs-5.20-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix inode reservation space for removing transaction
xfs: Fix false ENOSPC when performing direct write on a delalloc extent in cow fork
xfs: fix intermittent hang during quotacheck
xfs: check return codes when flushing block devices
Linus Torvalds [Sat, 13 Aug 2022 20:41:48 +0000 (13:41 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and trivial updates.
The major new core update is a change to the way device, target and
host reference counting is done to try to make it more robust (this
change has soaked for a while to try to winkle out any bugs)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix typo 'the the' in comment
scsi: megaraid_sas: Remove redundant variable cmd_type
scsi: FlashPoint: Remove redundant variable bm_int_st
scsi: zfcp: Fix missing auto port scan and thus missing target ports
scsi: core: Call blk_mq_free_tag_set() earlier
scsi: core: Simplify LLD module reference counting
scsi: core: Make sure that hosts outlive targets
scsi: core: Make sure that targets outlive devices
scsi: ufs: ufs-pci: Correct check for RESET DSM
scsi: target: core: De-RCU of se_lun and se_lun acl
scsi: target: core: Fix race during ACL removal
scsi: ufs: core: Correct ufshcd_shutdown() flow
scsi: ufs: core: Increase the maximum data buffer size
scsi: lpfc: Check the return value of alloc_workqueue()
Linus Torvalds [Sat, 13 Aug 2022 20:37:36 +0000 (13:37 -0700)]
Merge tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request
- print nvme connect Linux error codes properly (Amit Engel)
- fix the fc_appid_store return value (Christoph Hellwig)
- fix a typo in an error message (Christophe JAILLET)
- add another non-unique identifier quirk (Dennis P. Kliem)
- check if the queue is allocated before stopping it in nvme-tcp
(Maurizio Lombardi)
- restart admin queue if the caller needs to restart queue in
nvme-fc (Ming Lei)
- use kmemdup instead of kmalloc + memcpy in nvme-auth (Zhang
Xiaoxu)
- __alloc_disk_node() error handling fix (Rafael)
* tag 'block-6.0-2022-08-12' of git://git.kernel.dk/linux-block:
block: Do not call blk_put_queue() if gendisk allocation fails
nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG GAMMIX S70
nvme-tcp: check if the queue is allocated before stopping it
nvme-fabrics: Fix a typo in an error message
nvme-fabrics: parse nvme connect Linux error codes
nvmet-auth: use kmemdup instead of kmalloc + memcpy
nvme-fc: fix the fc_appid_store return value
nvme-fc: restart admin queue if the caller needs to restart queue
Linus Torvalds [Sat, 13 Aug 2022 20:28:54 +0000 (13:28 -0700)]
Merge tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Regression fix for this merge window, fixing a wrong order of
arguments for io_req_set_res() for passthru (Dylan)
- Fix for the audit code leaking context memory (Peilin)
- Ensure that provided buffers are memcg accounted (Pavel)
- Correctly handle short zero-copy sends (Pavel)
- Sparse warning fixes for the recvmsg multishot command (Dylan)
- Error handling fix for passthru (Anuj)
- Remove randomization of struct kiocb fields, to avoid it growing in
size if re-arranged in such a fashion that it grows more holes or
padding (Keith, Linus)
- Small series improving type safety of the sqe fields (Stefan)
* tag 'io_uring-6.0-2022-08-13' of git://git.kernel.dk/linux-block:
io_uring: add missing BUILD_BUG_ON() checks for new io_uring_sqe fields
io_uring: make io_kiocb_to_cmd() typesafe
fs: don't randomize struct kiocb fields
io_uring: consistently make use of io_notif_to_data()
io_uring: fix error handling for io_uring_cmd
io_uring: fix io_recvmsg_prep_multishot sparse warnings
io_uring/net: send retry for zerocopy
io_uring: mem-account pbuf buckets
audit, io_uring, io-wq: Fix memory leak in io_sq_thread() and io_wqe_worker()
io_uring: pass correct parameters to io_req_set_res
Carsten Haitzler [Fri, 12 Aug 2022 12:16:28 +0000 (13:16 +0100)]
perf test: Refactor shell tests allowing subdirs
This is a prelude to adding more tests to shell tests and in order to
support putting those tests into subdirectories, I need to change the
test code that scans/finds and runs them.
To support subdirs I have to recurse so it's time to refactor the code
to allow this and centralize the shell script finding into one location
and only one single scan that builds a list of all the found tests in
memory instead of it being duplicated in 3 places.
This code also optimizes things like knowing the max width of desciption
strings (as we can do that while we scan instead of a whole new pass of
opening files).
It also more cleanly filters scripts to see only *.sh files thus
skipping random other files in directories like *~ backup files, other
random junk/data files that may appear and the scripts must be
executable to make the cut (this ensures the script lib dir is not seen
as scripts to run).
This avoids perf test running previous older versions of test scripts
that are editor backup files as well as skipping perf.data files that
may appear and so on.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20220812121641.336465-2-carsten.haitzler@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:49 +0000 (16:09 -0700)]
perf jevents: Fold strings optimization
If a shorter string ends a longer string then the shorter string may
reuse the longer string at an offset. For example, on x86 the event
arith.cycles_div_busy and cycles_div_busy can be folded, even though
they have difference names the strings are identical after 6
characters. cycles_div_busy can reuse the arith.cycles_div_busy string
at an offset of 6.
In pmu-events.c this looks like the following where the 'also:' lists
folded strings:
/* offset=177541 */ "arith.cycles_div_busy\000\000pipeline\000Cycles the divider is busy\000\000\000event=0x14,period=2000000,umask=0x1\000\000\000\000\000\000\000\000\000" /* also: cycles_div_busy\000\000pipeline\000Cycles the divider is busy\000\000\000event=0x14,period=2000000,umask=0x1\000\000\000\000\000\000\000\000\000 */
As jevents.py combines multiple strings for an event into a larger
string, the amount of folding is minimal as all parts of the event must
align. Other organizations can benefit more from folding, but lose space
by say recording more offsets.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-15-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:48 +0000 (16:09 -0700)]
perf jevents: Compress the pmu_events_table
The pmu_events array requires 15 pointers per entry which in position
independent code need relocating. Change the array to be an array of
offsets within a big C string. Only the offset of the first variable is
required, subsequent variables are stored in order after the \0
terminator (requiring a byte per variable rather than 4 bytes per
offset).
The file size savings are:
no jevents - the same 19,788,464bytes
x86 jevents - ~16.7% file size saving 23,744,288bytes vs 28,502,632bytes
all jevents - ~19.5% file size saving 24,469,056bytes vs 30,379,920bytes
default build options plus NO_LIBBFD=1.
For example, the x86 build savings come from .rela.dyn and
.data.rel.ro becoming smaller by 3,157,032bytes and 3,042,016bytes
respectively. .rodata increases by 1,432,448bytes, giving an overall
4,766,600bytes saving.
To make metric strings more shareable, the topic is changed from say
'skx metrics' to just 'metrics'.
To try to help with the memory layout the pmu_events are ordered as used
by perf qsort comparator functions.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-14-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:47 +0000 (16:09 -0700)]
perf metrics: Copy entire pmu_event in find metric
The pmu_event passed to the pmu_events_table_for_each_event is invalid
after the loop. Copy the entire struct in metricgroup__find_metric.
Reduce the scope of this function to static.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-13-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:46 +0000 (16:09 -0700)]
perf pmu-events: Hide the pmu_events
Hide that the pmu_event structs are an array with a new wrapper struct.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-12-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:45 +0000 (16:09 -0700)]
perf pmu-events: Don't assume pmu_event is an array
The current code assumes that a struct pmu_event can be iterated over
forward until a NULL pmu_event is encountered.
This makes it difficult to refactor pmu_event.
Add a loop function taking a callback function that's passed the struct
pmu_event.
This way the pmu_event is only needed for one element and not an entire
array.
Switch existing code iterating over the pmu_event arrays to use the new
loop function pmu_events_table_for_each_event.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-11-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:44 +0000 (16:09 -0700)]
perf pmu-events: Move test events/metrics to JSON
Move arrays of pmu_events into the JSON code so that it may be
regenerated and modified by the jevents.py script.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-10-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:43 +0000 (16:09 -0700)]
perf test: Use full metric resolution
The simple metric resolution doesn't handle recursion properly, switch
to use the full resolution as with the parse-metric tests which also
increases coverage. Don't set the values for the metric backward as
failures to generate a result are ignored.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-9-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:42 +0000 (16:09 -0700)]
perf pmu-events: Hide pmu_events_map
Move usage of the table to pmu-events.c so it may be hidden. By
abstracting the table the implementation can later be changed.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-8-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:41 +0000 (16:09 -0700)]
perf pmu-events: Avoid passing pmu_events_map
Preparation for hiding pmu_events_map as an implementation detail. While
the map is passed, the table of events is all that is normally wanted.
While modifying the function's types, rename pmu_events_map__find to
pmu_events_table__find to match later encapsulation. Similarly rename
pmu_add_cpu_aliases_map to pmu_add_cpu_aliases_table.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-7-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:40 +0000 (16:09 -0700)]
perf pmu-events: Hide pmu_sys_event_tables
Move usage of the table to pmu-events.c so it may be hidden. By
abstracting the table the implementation can later be changed.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-6-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:39 +0000 (16:09 -0700)]
perf jevents: Sort JSON files entries
Sort the JSON files entries on conversion to C. The sort order tries to
replicated cmp_sevent from pmu.c so that the input there is already
sorted except for sysfs events. Specifically, the sort order is given by
the tuple:
(not j.desc is None, fix_none(j.topic), fix_none(j.name), fix_none(j.pmu), fix_none(j.metric_name))
which is putting events with descriptions and topics before those
without, then sorting by name, then pmu and finally metric_name
Add the topic to JsonEvent on reading to simplify. Remove an unnecessary
lambda in the JSON reading.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:38 +0000 (16:09 -0700)]
perf jevents: Provide path to JSON file on error
If a JSONDecoderError or similar is raised then it is useful to know the
path. Print this and then raise the exception agan.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-4-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:37 +0000 (16:09 -0700)]
perf jevents: Remove the type/version variables
pmu_events_map has a type variable that is always initialized to "core"
and a version variable that is never read. Remove these from the API as
it is straightforward to add them back when necessary.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Aug 2022 23:09:36 +0000 (16:09 -0700)]
perf jevent: Add an 'all' architecture argument
When 'all' is passed as the architecture generate a mapping table for
all architectures. This simplifies testing. To identify the table for an
architecture add an arch variable to the pmu_events_map.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Will Deacon <will@kernel.org> Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220812230949.683239-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sat, 13 Aug 2022 01:39:43 +0000 (18:39 -0700)]
Merge tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"There's still a handful of new features in here, but there are a lot
of fixes/cleanups as well:
- Support for the Zicbom extension for explicit cache-block
management, along with the necessary bits to make the non-standard
cache management ops on the Allwinner D1 function
- Support for the Zihintpause extension, which codifies a go-slow
instruction used for cpu_relax()
- Support for the Sstc extension for supervisor-mode timer/counter
management
- Many device tree fixes and cleanups, including a large set for the
Canaan device trees
- A handful of fixes and cleanups for the PMU driver"
* tag 'riscv-for-linus-5.20-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (43 commits)
dt-bindings: gpio: sifive: add gpio-line-names
wireguard: selftests: set CONFIG_NONPORTABLE on riscv32
RISC-V: KVM: Support sstc extension
RISC-V: Improve SBI definitions
RISC-V: Move counter info definition to sbi header file
RISC-V: Fix SBI PMU calls for RV32
RISC-V: Update user page mapping only once during start
RISC-V: Fix counter restart during overflow for RV32
RISC-V: Prefer sstc extension if available
RISC-V: Enable sstc extension parsing from DT
RISC-V: Add SSTC extension CSR details
riscv:uprobe fix SR_SPIE set/clear handling
dt-bindings: riscv: fix SiFive l2-cache's cache-sets
riscv: ensure cpu_ops_sbi is declared
RISC-V: cpu_ops_spinwait.c should include head.h
RISC-V: Declare cpu_ops_spinwait in <asm/cpu_ops.h>
riscv: dts: starfive: correct number of external interrupts
riscv: dts: sifive unmatched: Add PWM controlled LEDs
riscv/purgatory: Omit use of bin2c
riscv/purgatory: hard-code obj-y in Makefile
...
* tag 'devicetree-fixes-for-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: chrome: google,cros-ec-typec: restrict allowed properties
dt-bindings: Drop Dan Murphy and Ricardo Rivera-Matos
dt-bindings: Drop Robert Jones
dt-bindings: Drop Beniamin Bia and Stefan Popa
dt-bindings: iio: Drop Bogdan Pricop
dt-bindings: iio: Drop Joachim Eastwood
dt-bindings: mailbox: arm,mhu: Make secure interrupt optional
dt-bindings: pinctrl: qcom,ipq6018: Fix example 'gpio-ranges' size
dt-bindings: Drop DT_MK_SCHEMA_FLAGS conditional selecting schema files
dt-bindings: mfd: convert to yaml Qualcomm SPMI PMIC
dt-bindings: mmc: sdhci-msm: Fix 'operating-points-v2 was unexpected' issue
dt-bindings: display: simple-framebuffer: Drop Bartlomiej Zolnierkiewicz
Drivers:
- use simple i2c probe where possible
- sun6i: add R329 support
- zynqmp: add calibration support
- vr41xx: remove unused driver"
* tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
rtc: spear: set range max
rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0
rtc: zynqmp: initialize fract_tick
rtc: Add NCT3018Y real time clock driver
dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock
dt-bindings: rtc: nxp,pcf85063: Convert to DT schema
dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt'
rtc: rx8025: fix 12/24 hour mode detection on RX-8035
rtc: cros-ec: Only warn once in .remove() about notifier_chain problems
rtc: vr41xx: remove driver
rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()
rtc: rv8803: fix missing unlock on error in rv8803_set_time()
rtc: zynqmp: Add calibration set and get support
rtc: zynqmp: Updated calibration value
dt-bindings: rtc: zynqmp: Add clock information
rtc: sun6i: add support for R329 RTC
rtc: Directly use ida_alloc()/free()
rtc: Introduce ti-k3-rtc
dt-bindings: rtc: Add TI K3 RTC description
dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section
...
projects / kernel.git / log