drm/amd/display: Clean up for DCN1 clock debug logging
[Why]
To prepare for clock debug logging. With the exception of removing
max_supported_dppclk_khz from logs, there are no functional changes.
[How]
Add clk_bypass struct and clean up buffer logic
Signed-off-by: Fatemeh Darbehani <fatemeh.darbehani@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Su Chung <Su.Chung@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Steven Chiu [Mon, 12 Nov 2018 18:22:36 +0000 (13:22 -0500)]
drm/amd/display: 3.2.08
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Fatemeh Darbehani <Fatemeh.Darbehani@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Fri, 9 Nov 2018 16:50:18 +0000 (11:50 -0500)]
drm/amd/display: Allow clock lower on dce100
dce100 was set to always pass safe_to_lower = false
to the clock manager
Thus, on suspend the clocks were not being set to 0
which is incorrect behaviour
This was causing s3 resume to blackscreen on intel
CPUs with dce100 GPUs attached
(Note that the hash in this Fixes: tag is the hash on Alex's tree) Fixes: ae7d8aeb38d7 ("drm/amd/display: remove safe_to_lower flag from dc, use 2 functions instead") Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dithering needs to be enabled or disabled as requested. If
dc_stream_update->dither_option is non-null, program the FMT blocks.
Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Copy crc_enabled when duplicating dm_crtc_state
[Why]
When running igt@kms_plane@pixel-format-pipe-* tests the CRC read will
time out and the test will fail.
This is because the CRTC is duplicated but the crc_enabled parameter
isn't copied over to the new dm_crtc_state. CRC reads will time out
because amdgpu_dm_crtc_handle_crc_irq will no longer call
drm_crtc_add_crc_entry.
[How]
Copy crc_enabled when duplicating the state.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: David Francis <David.Francis@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Chiawen Huang [Fri, 9 Nov 2018 03:44:38 +0000 (11:44 +0800)]
drm/amd/display: Add customizable tracing event
[why]
add customizable log with a message input, which is for adding
test log in debugging as printf function in ETW.
[Usage]
EVENT_LOG_CUST_MSG1("TestLog","Hello World %d=0x%x", 123, pDC);
Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nevenko Stupar [Fri, 9 Nov 2018 00:20:11 +0000 (19:20 -0500)]
drm/amd/display: Re-arrange GFX9 fields
For more clear usage in future
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
hersen wu [Tue, 30 Oct 2018 20:39:15 +0000 (16:39 -0400)]
drm/amd/display: fbc state could not reach while enable fbc
[WHY] fbc is within the data path from memory to dce. while
re-configure mc dmif, fbc should be enabled. otherwise, fbc
may not be enabled properly.
[HOW] before re-configure mc dmif, disable fbc, only after
dmif re-configuration fully done, enable fbc again.
Signed-off-by: hersen wu <hersenxs.wu@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Use provided infopacket in stream (if valid) instead of reconstructing
in set_vendor_info_packet()
* Use proper format for enums
* Use dc info packet struct instead
Signed-off-by: Harmanprit Tatla <Harmanprit.Tatla@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Krunoslav Kovac [Wed, 24 Oct 2018 19:33:50 +0000 (15:33 -0400)]
drm/amd/display: Fix spelling of axis in modules/color/color_gamma.c
Use axis instead of axix
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This patch is for use by dm, no need for it in dc.
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Tue, 9 Oct 2018 13:45:28 +0000 (09:45 -0400)]
drm/amd/display: Start documentation of DC
[Why]
There are a lot of unintuitive parts of the dm-dc interface.
It would help us if these were documented to provide
a common understanding of what they are supposed to do
[How]
Most of this documentation is stubs, to be filled out more
thoroughly by the experts
Not every dm-accessible function and struct is mentioned.
Simple functions like getters, setters, retain, release,
create, destroy can be left unadorned.
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Steven Chiu [Mon, 5 Nov 2018 16:42:19 +0000 (11:42 -0500)]
drm/amd/display: 3.2.07
Signed-off-by: Steven Chiu <steven.chiu@amd.com> Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: fix sporadic multiple aux transaction failure
[why]
When there are multiple aux transaction in parallel, it is sometime
sporadically the aux transaction starts to continuously fail. The
aux transaction was failing because the busy bit for the given gpio
pin was always set. The busy bit was alway set because the
programming sequence to read, modify and write busy bit was not
atomic. Due to which when multiple threads are trying to modify the
busy bits for their gpio pins in the same integer variable sometimes
the busy bits integer variable is written with old data causing
failure.
[how]
Instead of using individual bits to track gpio pins and grouping
them to integers, one byte will be allcoated for each gpio pin.
Now whenever a gpio pin needs to be set to mark being used, only
writing a value of one to that byte is sufficient, other bytes
are not impacted. Also no need to have atomicity with bytes unlike
with bits.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 30 Nov 2018 15:33:02 +0000 (09:33 -0600)]
drm/amdgpu: Fix num_doorbell calculation issue
When paging queue is enabled, it use the second page of doorbell.
The AMDGPU_DOORBELL64_MAX_ASSIGNMENT definition assumes all the
kernel doorbells are in the first page. So with paging queue enabled,
the total kernel doorbell range should be original num_doorbell plus
one page (0x400 in dword), not *2.
Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 29 Nov 2018 15:25:10 +0000 (16:25 +0100)]
drm/ttm: fix LRU handling in ttm_buffer_object_transfer
We need to set the NO_EVICT flag on the ghost object or otherwise we are
adding it to the LRU.
When it is added to the LRU we can run into a race between destroying
and evicting it again.
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix NULL ptr deref for commit_planes_to_stream
[Why]
With scaling, underscan and abm changes we can end up calling
commit_planes_to_stream in commit_tail. This call uses dm_state->context
which can be NULL if the commit was a fast update.
[How]
Use dc_state instead since that can't be NULL unless the system ran
out of memory.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108912 Fixes: e64abff2f133 ("drm/amd/display: Use private obj helpers for dm_atomic_state") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roman Li [Tue, 27 Nov 2018 22:16:37 +0000 (17:16 -0500)]
drm/amd/display: Fix 6x4K displays light-up on Vega20
[Why]
More than 4x4K didn't lightup on Vega20 due to low dcfclk value.
Powerplay expects valid min requirement for dcfclk from DC.
[How]
Update min_dcfclock_khz based on min_engine_clock value.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Young Xiao [Tue, 27 Nov 2018 11:50:17 +0000 (11:50 +0000)]
drm: radeon: fix overflow on 32bit systems
the type mem->start is unsigned long, so this can overflow on
32bit system, since the type addr is uint64_t.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Young Xiao <YangX92@hotmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108709 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For XGMI hive case do reset in steps where each step iterates over
all devs in hive. This especially important for asic reset
since all PSP FW in hive must come up within a limited time
(around 1 sec) to properply negotiate the link.
Do this by refactoring amdgpu_device_gpu_recover and amdgpu_device_reset
into pre_asic_reset, asic_reset and post_asic_reset functions where is part
is exectued for all the GPUs in the hive before going to the next step.
v2: Update names for amdgpu_device_lock/unlock functions.
v3: Introduce per hive locking to avoid multiple resets for GPUs
in same hive.
v4:
Remove delayed_workqueue()/ttm_bo_unlock_delayed_workqueue() - they
are copy & pasted over from radeon and on amdgpu there isn't
any reason for that any more.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v3:
Add per hive lock to allow avoiding duplicate resets triggered by
multiple members of same hive.
Expose amdgpu_hive_info instead of adding getter functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is prep work for updating each PSP FW in hive after
GPU reset.
Split into build topology SW state and update each PSP FW in the hive.
Save topology and count of XGMI devices for reuse.
v2: Create seperate header for XGMI.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Set FreeSync state using drm VRR properties
Support for AMDGPU specific FreeSync properties and ioctls are dropped
from amdgpu_dm in favor of supporting drm variable refresh rate
properties.
The notify_freesync and set_freesync_property functions are dropped
from amdgpu_display_funcs.
The drm vrr_capable property is now attached to any DP/HDMI connector.
Its value is updated accordingly to the connector's FreeSync capabiltiy.
The freesync_enable logic and ioctl control has has been dropped in
favor of utilizing the vrr_enabled on the drm CRTC. This allows for more
fine grained atomic control over which CRTCs should support variable
refresh rate.
To handle state changes for vrr_enabled it was easiest to drop the
forced modeset on freesync_enabled change. This patch now performs the
required stream updates when planes are flipped.
This is done for a few reasons:
(1) VRR stream updates can be done in the fast update path
(2) amdgpu_dm_atomic_check would need to be hacked apart to check
desired variable refresh state and capability before the CRTC
disable pass.
(3) Performing VRR stream updates on-flip is needed for enabling BTR
support.
VRR packets and timing adjustments are now tracked and compared to
previous values sent to the hardware.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Correct get_crtc_scanoutpos behavior when vpos >= vtotal
When variable refresh rate is active the hardware counter can return
a position >= vtotal. This results in a vpos being returned from
amdgpu_display_get_crtc_scanoutpos that's a positive value. The
positive value indicates to the caller that the display is
currently in scanout when the display is actually still in vblank.
This is because the vfront porch duration is unknown with variable
refresh active and will end when either a page flip occurs or the
timeout specified by the driver/display is reached.
The behavior of the amdgpu_display_get_crtc_scanoutpos remains the
same when the position is below vtotal. When the position is above
vtotal the function will return a value that is effectively -vbl_end,
the size of the vback porch.
The only caller affected by this change is the DRM helper for
calculating vblank timestamps. This change corrects behavior for
calculating the page flip timestamp from being the previous timestamp
to the calculation to the next timestamp when position >= vtotal.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These include the drm_connector 'vrr_capable' and the drm_crtc
'vrr_enabled' properties.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces the 'vrr_enabled' CRTC property to allow
dynamic control over variable refresh rate support for a CRTC.
This property should be treated like a content hint to the driver -
if the hardware or driver is not capable of driving variable refresh
timings then this is not considered an error.
Capability for variable refresh rate support should be determined
by querying the vrr_capable drm connector property.
It is worth noting that while the property is intended for atomic use
it isn't filtered from legacy userspace queries. This allows for Xorg
userspace drivers to implement support.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm: Add vrr_capable property to the drm connector
Modern display hardware is capable of supporting variable refresh rates.
This patch introduces the "vrr_capable" property on the connector to
allow userspace to query support for variable refresh rates.
Atomic drivers should attach this property to connectors that are
capable of driving variable refresh rates using
drm_connector_attach_vrr_capable_property().
The value should be updated based on driver and hardware capability
by using drm_connector_set_vrr_capable_property().
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Fri, 23 Nov 2018 19:48:27 +0000 (13:48 -0600)]
drm/amdgpu: Move doorbell structures to seperate file
Move doorbell structures, enum definitions and helper functions
from amdgpu.h to amdgpu_doorbell.h. No functional change
Signed-off-by: Oak Zeng <ozeng@amd.com> Proposed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 19 Nov 2018 21:20:07 +0000 (15:20 -0600)]
drm/amdgpu: Use asic specific doorbell index instead of macro definition
ASIC specific doorbell layout is used instead of enum definition
Signed-off-by: Oak Zeng <ozeng@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 19 Nov 2018 20:36:09 +0000 (14:36 -0600)]
drm/amdgpu: Call doorbell index init on device initialization
Also call functioin amdgpu_device_doorbell_init after
amdgpu_device_ip_early_init because the former depends
on the later to set up asic-specific init_doorbell_index
function
Signed-off-by: Oak Zeng <ozeng@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 19 Nov 2018 21:59:53 +0000 (15:59 -0600)]
drm/amdgpu: Doorbell layout for vega20 and future asic
This introduces new doorbell layout for vega20 and future asics
v2: Use enum definition instead of hardcoded value
Signed-off-by: Oak Zeng <ozeng@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 19 Nov 2018 15:51:20 +0000 (09:51 -0600)]
drm/amdgpu: Doorbell index initialization for ASICs before vega10
Initialize doorbell index for asics vi and cik
v2: Use enum definition instead of hardcoded number
Signed-off-by: Oak Zeng <ozeng@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 19 Nov 2018 15:25:37 +0000 (09:25 -0600)]
drm/amdgpu: Vega10 doorbell index initialization
v2: Use enum definition instead of hardcoded value
v3: Remove unused enum definition
Signed-off-by: Oak Zeng <ozeng@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Mon, 26 Nov 2018 16:41:23 +0000 (10:41 -0600)]
drm/amdgpu: Add asic func interface to init doorbell index
This is preparation to move doorbell index initialization
to amdgpu_asic_funcs
Signed-off-by: Oak Zeng <ozeng@amd.com> Proposed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oak Zeng [Sat, 17 Nov 2018 01:23:44 +0000 (19:23 -0600)]
drm/amdgpu: Add field in amdgpu_dev to hold reserved doorbell index
This is a preparation work to make reserved doorbell index per device,
instead of using a global macro definition. By doing this, we can easily
change doorbell layout for future ASICs while not affecting ASICs in
production.
Signed-off-by: Oak Zeng <ozeng@amd.com> Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Tue, 27 Nov 2018 16:10:07 +0000 (11:10 -0500)]
drm/amd/display: Fix compile error with ACPI disabled
The fallback code for getting default backlight caps was using
the wrong variable name. Fix it.
Fixes: https://lists.freedesktop.org/archives/dri-devel/2018-November/197752.html Signed-off-by: David Francis <David.Francis@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Use private obj helpers for dm_atomic_state
[Why]
Two non-blocking commits in succession can result in a sequence where
the same dc->current_state is queried for both commits.
1. 1st commit -> check -> commit -> swaps atomic state -> queues work
2. 2nd commit -> check -> commit -> swaps atomic state -> queues work
3. 1st commit work finishes
The issue with this sequence is that the same dc->current_state is
read in both atomic checks. If the first commit modifies streams or
planes those will be missing from the dc->current_state for the
second atomic check. This result in many stream and plane errors in
atomic commit tail.
[How]
The driver still needs to track old to new state to determine if the
commit in its current implementation. Updating the dc_state in
atomic tail is wrong since the dc_state swap should be happening as
part of drm_atomic_helper_swap_state *before* the worker queue kicks
its work off.
The simplest replacement for the subclassing (which doesn't properly
manage the old to new atomic state swap) is to use the drm private
object helpers. While some of the dc_state members could be merged
into dm_crtc_state or dm_plane_state and copied over that way it is
easier for now to just treat the whole dc_state structure as a single
private object.
This allows amdgpu_dm to drop the dc->current_state copy from within
atomic check. It's replaced by a copy from the current atomic state
which is propagated correctly for the sequence described above.
Since access to the dm_state private object is now locked this should
also fix issues that could arise if submitting non-blocking commits
from different threads.
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Mon, 26 Nov 2018 16:44:06 +0000 (11:44 -0500)]
drm/amd: Query and use ACPI backlight caps
ACPI ATIF has a function called query
backlight transfer characteristics. Among the
information returned by this function is
the minimum and maximum input signals for the
backlight
Call that function on ACPI init. When DM
backlight device is updated, copy over the
backlight caps into DM, but only once. Use
the backlight caps in the backlight-to-dc
calculation
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Mon, 26 Nov 2018 18:14:14 +0000 (13:14 -0500)]
drm/amd: update ATIF functions in AMD ACPI header
The ACPI interface in AMD was a few years out of date
and contained some unused and deprecated functions
Remove functions: Select Active Displays, Get Lid State,
Get TV Standard, Set TV Standard, Get Panel Expansion Mode,
Set Panel Expansion Mode, Get Graphics Device Types
Add functions: Query Backlight Transfer Characteristics,
Ready To Undock Notification
Changed functions: Get System Parameters,
Get System BIOS Requests
All changes are right from the standard
ATI ACPI Control Methods V0.44
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Mon, 26 Nov 2018 20:51:09 +0000 (15:51 -0500)]
drm/amd: Add abm level drm property
Adaptive Backlight Management (ABM) is a feature
that reduces backlight level to save power, while
increasing pixel contrast and pixel luminance
to maintain readability and image quality.
ABM will adjust in response to the
pixel luminance of the displayed content.
ABM is made available as a drm property on eDP
monitors called "abm level", which ranges from 0 to 4.
When this property is set to 0, ABM is off. Levels 1
to 4 represent different ranges of backlight reduction.
At higher levels both the backlight reduction and pixel
adjustment will be greater.
ABM requires DMCU firmware, which is currently available for
Raven ASICs only. If the feature does not work, please
ensure your firmware is up to date.
v2:
Fix commit message, only attach property if DMCU loaded
v3:
Store ABM level in crtc state to accommodate dc
v4:
Fix ABM saving on dpms cycle
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Mon, 26 Nov 2018 16:38:33 +0000 (11:38 -0500)]
drm/amd/display: Load DMCU IRAM
DMCU IRAM must be loaded by the driver before DMCU
can function.
Move the IRAM code out of the shadows and into a new file
modules/power/power_helpers.c
The IRAM table contains the backlight curve and ABM parameters
Add this new file to the Makefiles
Call dmcu_load_iram in late init of DM
Move struct dmcu_version from dc.h to dmcu.h to allow
dmcu to be included on its own
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Fri, 23 Nov 2018 10:52:21 +0000 (18:52 +0800)]
drm/amdgpu: Fix static checker warning
drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c:49 amdgpu_allocate_static_csa()
error: uninitialized symbol 'ptr'.
the test if (!bo) doesn't work, as the bo is a pointer to a pointer.
if bo create failed, the *bo will be set to NULL.
so change to test *bo.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guttula, Suresh [Fri, 16 Nov 2018 06:50:37 +0000 (06:50 +0000)]
drm/amd:Enable/Disable NBPSTATE on On/OFF of UVD
We observe black lines (underflow) on display when playing a
4K video with UVD. On Disabling Low memory P state this issue is
not seen.
In this patch ,disabling low memory P state only when video
size >= 4k.
Multiple runs of power measurement shows no impact
Signed-off-by: suresh guttula <suresh.guttula@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reason for revert:
This patch sends msg PPSMC_MSG_DisableLowMemoryPstate(0x002e)
in wrong of sequence to SMU which is before PPSMC_MSG_UVDPowerON (0x0008).
This leads to SMU failing to service the request as it is
dependent on UVD to be powered ON, since it accesses UVD
registers.
This msg should ideally be sent only when the UVD is about to decode
a 4k video.
Signed-off-by: Shirish S <shirish.s@amd.com> Signed-off-by: suresh guttula <suresh.guttula@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix Scaling (RMX_*) for DC driver
Before:
We use drm_match_cea_mode() to get the vic for any mode we
want to set, most of the time vic will be different for the new mode.
DC uses memcmp to check if timing changed, in this case DC will
say timing changed and we endup doing a full modeset.
Current:
Now we check if !RMX_OFF and old_refresh == new_refresh if so
we copy the vic from old timing. In a case where we are currently on
a lower timing and want to change to higher mode, stream->dst will be
different and cause us to do a full modeset, which is what we want.
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Setting this allows for display scaling by default
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Tue, 20 Nov 2018 17:17:45 +0000 (17:17 +0000)]
drm/amd/display: fix dereference of pointer fs_params before it is null checked
Currently there are several instances of pointer fs_params being
dereferenced before fs_params is being null checked. Fix this by
only dereferencing fs_params after the null check.
Detected by CoverityScan, CID#1475565 ("Dereference before null check")
Fixes: 9a285cd734c8 ("drm/amd/display: Add support for Freesync 2 HDR and Content to Display Mapping") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 19 Nov 2018 14:53:43 +0000 (09:53 -0500)]
drm/amdgpu: enable paging queue based on FW version (v2)
Based SDMA fw version to enable has_page_queue support. Have to move
sdma_v4_0_init_microcode from sw_init to early_init, to load firmware
and init fw_version before set_ring/buffer/vm_pte_funcs use it.
v2: don't enable on vega12, 20 until confirmed
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 19 Nov 2018 15:36:02 +0000 (10:36 -0500)]
drm/amdgpu: enable paging queue doorbell support v4
Because increase SDMA_DOORBELL_RANGE to add new SDMA doorbell for paging queue will
break SRIOV, instead we can reserve and map two doorbell pages for amdgpu, paging
queues doorbell index use same index as SDMA gfx queues index but on second page.
For Vega20, after we change doorbell layout to increase SDMA doorbell for 8 SDMA RLC
queues later, we could use new doorbell index for paging queue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Philip Yang [Mon, 19 Nov 2018 15:37:08 +0000 (10:37 -0500)]
drm/amdgpu: fix typo in function sdma_v4_0_page_resume
This looks like copy paste typo
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 19 Nov 2018 10:59:53 +0000 (18:59 +0800)]
drm/amdgpu: Remove dead static variable
The static struct drm_driver *driver was
not used because drm_pci_init was deprecated
v2: Remove static pointer pdriver(Christian)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Wed, 5 Sep 2018 15:46:14 +0000 (11:46 -0400)]
drm/amdkfd: change system memory overcommit limit
It is to improve system limit by:
1. replacing userptrlimit with a total memory limit that
conunts TTM memory usage and userptr usage.
2. counting acc size for all BOs.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Thu, 3 May 2018 21:37:56 +0000 (17:37 -0400)]
drm/amdgpu: Fix KFD doorbell SG BO mapping
This change prepares for adding SG BOs that will be used for mapping
doorbells into GPUVM address space.
This type of BO would be mistaken for an invalid userptr BO. Improve
that check to test that it's actually a userptr BO so that SG BOs that
are still in the CPU domain can be validated and mapped correctly.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Felix Kuehling [Tue, 13 Mar 2018 20:05:59 +0000 (16:05 -0400)]
drm/amdkfd: Fix and simplify sync object handling for KFD
The adev parameter in amdgpu_sync_fence and amdgpu_sync_resv is only
needed for updating sync->last_vm_update. This breaks if different
adevs are passed to calls for the same sync object.
Always pass NULL for calls from KFD because sync objects used for
KFD don't belong to any particular device, and KFD doesn't need the
sync->last_vm_update fence.
This fixes kernel log warnings on multi-GPU systems after recent
changes in amdgpu_amdkfd_gpuvm_restore_process_bos.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of waiting for each KFD BO after validation just wait for the
last BO moving fence.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Remove explicit wait after VM validate
PD or PT might have to be moved during validation and this move has to be
completed before updating it. If page table updates are done using SDMA
then this serializing is done by SDMA command submission.
And if PD/PT updates are done by CPU, then explicit waiting for PD/PT
updates are done in amdgpu VM amdgpu_vm_wait_pd function.
Sync to PD BO moving fence to handle corner case where none of the PTs
are updated but PD is evicted.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 16 Nov 2018 18:22:38 +0000 (13:22 -0500)]
drm/amdgpu/psp: use define rather than magic number for mode1 reset
Use the define rather than hardcoded value.
Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trigger Huang [Wed, 14 Nov 2018 02:44:50 +0000 (10:44 +0800)]
drm/scheduler: Fix bad job be re-processed in TDR
A bad job is the one triggered TDR(In the current amdgpu's
implementation, actually all the jobs in the current joq-queue will
be treated as bad jobs). In the recovery process, its fence
will be fake signaled and as a result, the work behind will be scheduled
to delete it from the mirror list, but if the TDR process is invoked
before the work's execution, then this bad job might be processed again
and the call dma_fence_set_error to its fence in TDR process will lead to
kernel warning trace:
So just delete the bad job from mirror list directly
Changes in v3:
- Add a helper function to delete the bad jobs from mirror list and call
it directly *before* the job's fence is signaled
Changes in v2:
- delete the useless list node check
- also delete bad jobs in drm_sched_main because:
kthread_unpark(ring->sched.thread) will be invoked very early before
amdgpu_device_gpu_recover's return, then drm_sched_main will have
chance to pick up a new job from the job queue. This new job will be
added into the mirror list and processed by amdgpu_job_run, but may
not be deleted from the mirror list on time due to the same reason.
And finally re-processed by drm_sched_job_recovery
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com> Reviewed-by: Christian König <chrstian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Wed, 17 Oct 2018 16:24:02 +0000 (12:24 -0400)]
drm/amdkfd: Workaround PASID missing in gfx9 interrupt payload under non HWS
This is a known gfx9 HW issue, and this change can perfectly workaround
the issue.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Wed, 17 Oct 2018 16:03:48 +0000 (12:03 -0400)]
drm/amdkfd: Adjust the debug message in KFD ISR
This makes debug message get printed even when there is early return.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Gang Ba [Wed, 5 Sep 2018 15:27:14 +0000 (11:27 -0400)]
drm/amdkfd: Added Vega12 and Polaris12 for KFD.
Add Vega12 and Polaris12 device info and device IDs to KFD.
Signed-off-by: Gang Ba <gaba@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yong Zhao [Mon, 4 Jun 2018 18:33:13 +0000 (14:33 -0400)]
drm/amdkfd: Replace mqd with mqd_mgr as the variable name for mqd_manager
This will make reading code much easier. This fixes a few spots missed in a
previous commit with the same title.
Signed-off-by: Yong Zhao <yong.zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joerg Roedel [Thu, 15 Nov 2018 13:40:29 +0000 (14:40 +0100)]
drm/amd/powerplay: Ratelimit all "was not implemented" messages
Running kfdtest on an AMD Carizzo flooded the kernel log
with thousands of these "was not implemented" messages,
making it impossible to see other messages there.
Ratelimit the messages to prevent user-space from flooding
the kernel log.
Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Thu, 25 Oct 2018 18:18:12 +0000 (14:18 -0400)]
drm/amd/display: Clean up DCN1 clock requests
[Why]
There was a full clock request struct of which only
one value was being used.
[How]
Replace the struct with a uint32_t
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Support amdgpu "max bpc" connector property (v2)
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch adds support for getting and setting the amdgpu driver
specific "max bpc" property on the connector.
It also adds support for limiting the output bpc based on the property
value. The default limitation is the lowest value in the range, 8bpc.
This was the old value before the range was uncapped.
This patch should be updated/replaced later once common drm support
for max bpc lands.
Bugzilla: https://bugs.freedesktop.org/108542
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645 Fixes: 8245be564741 ("drm/amd/display: Do not limit color depth to 8bpc")
v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Many panels support more than 8bpc but some modes are unavailable while
running at greater than 8bpc due to DP/HDMI bandwidth constraints.
Support for more than 8bpc was added recently in the driver but it
defaults to the maximum supported bpc - locking out these modes.
This should be a user configurable option such that the user can select
what bpc configuration they would like.
[How]
This patch introduces the "max bpc" amdgpu driver specific connector
property so the user can limit the maximum bpc. It ranges from 8 to 16.
This doesn't directly set the preferred bpc for the panel since it
follows Intel's existing driver conventions.
This proprety should be removed once common drm support for max bpc
lands.
v2: rebase on upstream (Alex)
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
YueHaibing [Thu, 15 Nov 2018 12:00:35 +0000 (20:00 +0800)]
drm/amdgpu: remove set but not used variable 'ring'
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/amd/amdgpu/psp_v10_0.c: In function 'psp_v10_0_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v10_0.c:230:19: warning:
variable 'ring' set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/amd/amdgpu/psp_v3_1.c: In function 'psp_v3_1_ring_stop':
drivers/gpu/drm/amd/amdgpu/psp_v3_1.c:359:19: warning:
variable ‘ring’ set but not used [-Wunused-but-set-variable]
It not used since commit 5fc141fd0641 ("drm/amdgpu: added api for stopping psp ring (v2)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Thu, 25 Oct 2018 19:47:43 +0000 (15:47 -0400)]
drm/amd/display: Get backlight controller id from link
[Why]
dc_link_set_backlight_level can be called from a context
where the stream is unknown. In this case, we can still
find which controller is driving this particular backlight
[How]
Compare links for equality instead of streams
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joshua Aberback [Tue, 30 Oct 2018 19:34:33 +0000 (15:34 -0400)]
drm/amd/display: Adjust stream enable sequence
[Why]
We observed an issue where a display would not accept programming of
the ignore_MSA_timing_param bit if the stream was blanked.
[How]
move enable_stream_features from enable_link_dp to
core_link_enable_stream, after unblank_stream
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Bernstein [Mon, 29 Oct 2018 20:05:47 +0000 (16:05 -0400)]
drm/amd/display: get tail pipe before aquire free pipe
[Why]
For some complicated blending transition cases, the head
pipe of the second stream may end up being a higher pipe
index than the free pipe. In those cases dc_add_plane_to_context
will incorrectly set the tail_pipe to the free pipe, which
will cause the top_pipe and bottom_pipe to be the same
[How]
Move the call to resource_get_tail_pipe_for_stream() to be
before call to acquire_free_pipe_for_stream().
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiaodong Yan [Tue, 23 Oct 2018 18:08:53 +0000 (02:08 +0800)]
drm/amd/display: retry 3 times before successfully reading
DPCD Extended Receiver Capability Field
[Why]
1.dpcd extended receiver capability sometimes read fail,
and corrupted data leads to sink caps is not correct.
2.sometimes sink reply ack with fewer data
[How]
check the return value of core_link_read_dpcd,
try to read again when failure happens
Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change the math to work in viewport rotation when calculating
viewport and viewport adjustment. This simplifies the math
for viewport calculation and makes viewport adjustment easier to
understand.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jun Lei [Wed, 24 Oct 2018 15:39:55 +0000 (11:39 -0400)]
drm/amd/display: clear underflow on optc unblank
[why]
Underflow is asserted due to some timing condition which does not
actually result in visible underflow (i.e. it occurs while blanked).
[how]
Force clear underflow occured bit whenver we unblank.
Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: calculate stream->phy_pix_clk before clock mapping
[why]
phy_pix_clk is one of the variable used to check if one PLL can be shared
with displays having common mode set configuration. As of now
phy_pix_clock varialbe is calculated in function dc_validate_stream().
dc_validate_stream() function is called after clocks are assigned for the
new display. Due to this during hotplug, when PLL sharing conditions are
checked for new display phy_pix_clk variable will be 0 and for displays
that are already enabled phy_pix_clk will have some value. Hence PLL will
not be shared and if the display hardware doesn't have any more PLL to
assign, mode set will fail due to resource unavailability.
[how]
Instead of only calculating the phy_pix_clk variable after the PLL is
assigned for new display, this patch calculates phy_pix_clk also during
the before assigning the PLL for new display.
Signed-off-by: Yogesh Mohan Marimuthu <yogesh.mohanmarimuthu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
David Francis [Wed, 24 Oct 2018 14:08:02 +0000 (10:08 -0400)]
drm/amd/display: Clean up dp_blank functions
[Why]
Unused variable "refresh" and incorrect comment formatting
[How]
Remove variable, reindent comments
Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / kernel.git / log