Linus Torvalds [Sat, 6 Jun 2020 16:59:34 +0000 (09:59 -0700)]
Merge branch 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
"Just two patches: one to add system-level cpu.stat to the root cgroup
for convenience and a trivial comment update"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add cpu.stat file to root cgroup
cgroup: Remove stale comments
Linus Torvalds [Sat, 6 Jun 2020 16:39:05 +0000 (09:39 -0700)]
Merge tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"The main changes are extending the TPM 2.0 PCR banks with bank
specific file hashes, calculating the "boot_aggregate" based on other
TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
as the basis for the cache hash table key, and preventing the mprotect
syscall to circumvent an IMA mmap appraise policy rule.
- In preparation for extending TPM 2.0 PCR banks with bank specific
digests, commit 9922ccf999c5 ("tpm: pass an array of
tpm_extend_digest structures to tpm_pcr_extend()") modified
tpm_pcr_extend(). The original SHA1 file digests were
padded/truncated, before being extended into the other TPM PCR
banks. This pull request calculates and extends the TPM PCR banks
with bank specific file hashes completing the above change.
- The "boot_aggregate", the first IMA measurement list record, is the
"trusted boot" link between the pre-boot environment and the
running OS. With TPM 2.0, the "boot_aggregate" record is not
limited to being based on the SHA1 TPM PCR bank, but can be
calculated based on any enabled bank, assuming the hash algorithm
is also enabled in the kernel.
Other changes include the following and five other bug fixes/code
clean up:
- supporting both a SHA1 and a larger "boot_aggregate" digest in a
custom template format containing both the the SHA1 ('d') and
larger digests ('d-ng') fields.
- Initial hash table key fix, but additional changes would be good"
* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
ima: Directly assign the ima_default_policy pointer to ima_rules
ima: verify mprotect change is consistent with mmap policy
evm: Fix possible memory leak in evm_calc_hmac_or_hash()
ima: Set again build_ima_appraise variable
ima: Remove redundant policy rule set in add_rules()
ima: Fix ima digest hash table key calculation
ima: Use ima_hash_algo for collision detection in the measurement list
ima: Calculate and extend PCR with digests in ima_template_entry
ima: Allocate and initialize tfm for each PCR bank
ima: Switch to dynamically allocated buffer for template digests
ima: Store template digest directly in ima_template_entry
ima: Evaluate error in init_ima()
ima: Switch to ima_hash_algo for boot aggregate
Linus Torvalds [Fri, 5 Jun 2020 23:44:36 +0000 (16:44 -0700)]
Merge tag 'for-linus-5.8-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
- John Hubbard's conversion from get_user_pages() to pin_user_pages()
- Colin Ian King's removal of an unneeded variable initialization
* tag 'for-linus-5.8-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: convert get_user_pages() --> pin_user_pages()
orangefs: remove redundant assignment to variable ret
Linus Torvalds [Fri, 5 Jun 2020 23:43:16 +0000 (16:43 -0700)]
Merge tag 'dlm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set includes a couple minor cleanups, and dropping the
interruptible from a wait_event that waits for an event from the
userspace cluster management"
* tag 'dlm-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: remove BUG() before panic()
dlm: Switch to using wait_event()
fs:dlm:remove unneeded semicolon in rcom.c
dlm: user: Replace zero-length array with flexible-array member
dlm: dlm_internal: Replace zero-length array with flexible-array member
Linus Torvalds [Fri, 5 Jun 2020 23:40:53 +0000 (16:40 -0700)]
Merge tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"22 changesets, 2 for stable.
Includes big performance improvement for large i/o when using
multichannel, also includes DFS fixes"
* tag '5.8-rc-smb3-fixes-part-1' of git://git.samba.org/sfrench/cifs-2.6: (22 commits)
cifs: update internal module version number
cifs: multichannel: try to rebind when reconnecting a channel
cifs: multichannel: use pointer for binding channel
smb3: remove static checker warning
cifs: multichannel: move channel selection above transport layer
cifs: multichannel: always zero struct cifs_io_parms
cifs: dump Security Type info in DebugData
smb3: fix incorrect number of credits when ioctl MaxOutputResponse > 64K
smb3: default to minimum of two channels when multichannel specified
cifs: multichannel: move channel selection in function
cifs: fix minor typos in comments and log messages
smb3: minor update to compression header definitions
cifs: minor fix to two debug messages
cifs: Standardize logging output
smb3: Add new parm "nodelete"
cifs: move some variables off the stack in smb2_ioctl_query_info
cifs: reduce stack use in smb2_compound_op
cifs: get rid of unused parameter in reconn_setup_dfs_targets()
cifs: handle hostnames that resolve to same ip in failover
cifs: set up next DFS target before generic_ip_connect()
...
Linus Torvalds [Fri, 5 Jun 2020 23:26:36 +0000 (16:26 -0700)]
Merge tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"There's some core VFS changes which affect a couple of filesystems:
- Make the inode hash table RCU safe and providing some RCU-safe
accessor functions. The search can then be done without taking the
inode_hash_lock. Care must be taken because the object may be being
deleted and no wait is made.
- Allow iunique() to avoid taking the inode_hash_lock.
- Allow AFS's callback processing to avoid taking the inode_hash_lock
when using the inode table to find an inode to notify.
- Improve Ext4's time updating. Konstantin Khlebnikov said "For now,
I've plugged this issue with try-lock in ext4 lazy time update.
This solution is much better."
Then there's a set of changes to make a number of improvements to the
AFS driver:
- Improve callback (ie. third party change notification) processing
by:
(a) Relying more on the fact we're doing this under RCU and by
using fewer locks. This makes use of the RCU-based inode
searching outlined above.
(b) Moving to keeping volumes in a tree indexed by volume ID
rather than a flat list.
(c) Making the server and volume records logically part of the
cell. This means that a server record now points directly at
the cell and the tree of volumes is there. This removes an N:M
mapping table, simplifying things.
- Improve keeping NAT or firewall channels open for the server
callbacks to reach the client by actively polling the fileserver on
a timed basis, instead of only doing it when we have an operation
to process.
- Improving detection of delayed or lost callbacks by including the
parent directory in the list of file IDs to be queried when doing a
bulk status fetch from lookup. We can then check to see if our copy
of the directory has changed under us without us getting notified.
- Determine aliasing of cells (such as a cell that is pointed to be a
DNS alias). This allows us to avoid having ambiguity due to
apparently different cells using the same volume and file servers.
- Improve the fileserver rotation to do more probing when it detects
that all of the addresses to a server are listed as non-responsive.
It's possible that an address that previously stopped responding
has become responsive again.
Beyond that, lay some foundations for making some calls asynchronous:
- Turn the fileserver cursor struct into a general operation struct
and hang the parameters off of that rather than keeping them in
local variables and hang results off of that rather than the call
struct.
- Implement some general operation handling code and simplify the
callers of operations that affect a volume or a volume component
(such as a file). Most of the operation is now done by core code.
- Operations are supplied with a table of operations to issue
different variants of RPCs and to manage the completion, where all
the required data is held in the operation object, thereby allowing
these to be called from a workqueue.
- Put the standard "if (begin), while(select), call op, end" sequence
into a canned function that just emulates the current behaviour for
now.
There are also some fixes interspersed:
- Don't let the EACCES from ICMP6 mapping reach the user as such,
since it's confusing as to whether it's a filesystem error. Convert
it to EHOSTUNREACH.
- Don't use the epoch value acquired through probing a server. If we
have two servers with the same UUID but in different cells, it's
hard to draw conclusions from them having different epoch values.
- Don't interpret the argument to the CB.ProbeUuid RPC as a
fileserver UUID and look up a fileserver from it.
- Deal with servers in different cells having the same UUIDs. In the
event that a CB.InitCallBackState3 RPC is received, we have to
break the callback promises for every server record matching that
UUID.
- Don't let afs_statfs return values that go below 0.
- Don't use running fileserver probe state to make server selection
and address selection decisions on. Only make decisions on final
state as the running state is cleared at the start of probing"
Acked-by: Al Viro <viro@zeniv.linux.org.uk> (fs/inode.c part)
* tag 'afs-next-20200604' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (27 commits)
afs: Adjust the fileserver rotation algorithm to reprobe/retry more quickly
afs: Show more a bit more server state in /proc/net/afs/servers
afs: Don't use probe running state to make decisions outside probe code
afs: Fix afs_statfs() to not let the values go below zero
afs: Fix the by-UUID server tree to allow servers with the same UUID
afs: Reorganise volume and server trees to be rooted on the cell
afs: Add a tracepoint to track the lifetime of the afs_volume struct
afs: Detect cell aliases 3 - YFS Cells with a canonical cell name op
afs: Detect cell aliases 2 - Cells with no root volumes
afs: Detect cell aliases 1 - Cells with root volumes
afs: Implement client support for the YFSVL.GetCellName RPC op
afs: Retain more of the VLDB record for alias detection
afs: Fix handling of CB.ProbeUuid cache manager op
afs: Don't get epoch from a server because it may be ambiguous
afs: Build an abstraction around an "operation" concept
afs: Rename struct afs_fs_cursor to afs_operation
afs: Remove the error argument from afs_protocol_error()
afs: Set error flag rather than return error from file status decode
afs: Make callback processing more efficient.
afs: Show more information in /proc/net/afs/servers
...
Linus Torvalds [Fri, 5 Jun 2020 23:19:28 +0000 (16:19 -0700)]
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:
- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.
- Clean up fiemap handling in ext4
- Clean up and refactor multiple block allocator (mballoc) code
- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.
- Fixed a race in ext4_sync_parent() versus rename()
- Simplify the error handling in the extent manipulation code
- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.
- Avoid passing an error pointer to brelse in ext4_xattr_set()
- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.
- Fix refcount handling if ext4_iget() fails
- Fix a crash in generic/019 caused by a corrupted extent node"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...
Linus Torvalds [Fri, 5 Jun 2020 22:45:03 +0000 (15:45 -0700)]
Merge tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- The largest change for this cycle is the DM zoned target's metadata
version 2 feature that adds support for pairing regular block devices
with a zoned device to ease the performance impact associated with
finite random zones of zoned device.
The changes came in three batches: the first prepared for and then
added the ability to pair a single regular block device, the second
was a batch of fixes to improve zoned's reclaim heuristic, and the
third removed the limitation of only adding a single additional
regular block device to allow many devices.
Testing has shown linear scaling as more devices are added.
- Add new emulated block size (ebs) target that emulates a smaller
logical_block_size than a block device supports
The primary use-case is to emulate "512e" devices that have 512 byte
logical_block_size and 4KB physical_block_size. This is useful to
some legacy applications that otherwise wouldn't be able to be used
on 4K devices because they depend on issuing IO in 512 byte
granularity.
- Add discard interfaces to DM bufio. First consumer of the interface
is the dm-ebs target that makes heavy use of dm-bufio.
- Fix DM crypt's block queue_limits stacking to not truncate
logic_block_size.
- Add Documentation for DM integrity's status line.
- Switch DMDEBUG from a compile time config option to instead use
dynamic debug via pr_debug.
- Fix DM multipath target's hueristic for how it manages
"queue_if_no_path" state internally.
DM multipath now avoids disabling "queue_if_no_path" unless it is
actually needed (e.g. in response to configure timeout or explicit
"fail_if_no_path" message).
This fixes reports of spurious -EIO being reported back to userspace
application during fault tolerance testing with an NVMe backend.
Added various dynamic DMDEBUG messages to assist with debugging
queue_if_no_path in the future.
- Add a new DM multipath "Historical Service Time" Path Selector.
- Fix DM multipath's dm_blk_ioctl() to switch paths on IO error.
- Improve DM writecache target performance by using explicit cache
flushing for target's single-threaded usecase and a small cleanup to
remove unnecessary test in persistent_memory_claim.
- Other small cleanups in DM core, dm-persistent-data, and DM
integrity.
* tag 'for-5.8/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (62 commits)
dm crypt: avoid truncating the logical block size
dm mpath: add DM device name to Failing/Reinstating path log messages
dm mpath: enhance queue_if_no_path debugging
dm mpath: restrict queue_if_no_path state machine
dm mpath: simplify __must_push_back
dm zoned: check superblock location
dm zoned: prefer full zones for reclaim
dm zoned: select reclaim zone based on device index
dm zoned: allocate zone by device index
dm zoned: support arbitrary number of devices
dm zoned: move random and sequential zones into struct dmz_dev
dm zoned: per-device reclaim
dm zoned: add metadata pointer to struct dmz_dev
dm zoned: add device pointer to struct dm_zone
dm zoned: allocate temporary superblock for tertiary devices
dm zoned: convert to xarray
dm zoned: add a 'reserved' zone flag
dm zoned: improve logging messages for reclaim
dm zoned: avoid unnecessary device recalulation for secondary superblock
dm zoned: add debugging message for reading superblocks
...
Linus Torvalds [Fri, 5 Jun 2020 22:11:50 +0000 (15:11 -0700)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
:This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates.
There are no major core changes in this series apart from a
refactoring in scsi_lib.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: ibmvscsi: Make some functions static
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-qcom: Fix scheduling while atomic issue
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: vhost: Notify TCM about the maximum sg entries supported per command
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qla2xxx: Remove an unused function
scsi: iscsi: Register sysfs for iscsi workqueue
scsi: scsi_debug: Parser tables and code interaction
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
scsi: qla2xxx: Fix endianness annotations in source files
...
Linus Torvalds [Fri, 5 Jun 2020 21:05:57 +0000 (14:05 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A more active cycle than most of the recent past, with a few large,
long discussed works this time.
The RNBD block driver has been posted for nearly two years now, and
flowing through RDMA due to it also introducing a new ULP.
The removal of FMR has been a recurring discussion theme for a long
time.
And the usual smattering of features and bug fixes.
Summary:
- Various small driver bugs fixes in rxe, mlx5, hfi1, and efa
- Continuing driver cleanups in bnxt_re, hns
- Big cleanup of mlx5 QP creation flows
- More consistent use of src port and flow label when LAG is used and
a mlx5 implementation
- Additional set of cleanups for IB CM
- 'RNBD' network block driver and target. This is a network block
RDMA device specific to ionos's cloud environment. It brings strong
multipath and resiliency capabilities.
- Accelerated IPoIB for HFI1
- QP/WQ/SRQ ioctl migration for uverbs, and support for multiple
async fds
- Support for exchanging the new IBTA defiend ECE data during RDMA CM
exchanges
- Removal of the very old and insecure FMR interface from all ULPs
and drivers. FRWR should be preferred for at least a decade now"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits)
RDMA/cm: Spurious WARNING triggered in cm_destroy_id()
RDMA/mlx5: Return ECE DC support
RDMA/mlx5: Don't rely on FW to set zeros in ECE response
RDMA/mlx5: Return an error if copy_to_user fails
IB/hfi1: Use free_netdev() in hfi1_netdev_free()
RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr()
RDMA/core: Move and rename trace_cm_id_create()
IB/hfi1: Fix hfi1_netdev_rx_init() error handling
RDMA: Remove 'max_map_per_fmr'
RDMA: Remove 'max_fmr'
RDMA/core: Remove FMR device ops
RDMA/rdmavt: Remove FMR memory registration
RDMA/mthca: Remove FMR support for memory registration
RDMA/mlx4: Remove FMR support for memory registration
RDMA/i40iw: Remove FMR leftovers
RDMA/bnxt_re: Remove FMR leftovers
RDMA/mlx5: Remove FMR leftovers
RDMA/core: Remove FMR pool API
RDMA/rds: Remove FMR support for memory registration
RDMA/srp: Remove support for FMR memory registration
...
Linus Torvalds [Fri, 5 Jun 2020 21:00:30 +0000 (14:00 -0700)]
Merge tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v5.8 kernel cycle.
Core changes:
- A new GPIO aggregator driver has been merged: this can join a few
select GPIO lines into a new aggregated GPIO chip. This can be used
for security: a process can be granted access to only these lines,
for example for industrial control. Another way to use this is to
reexpose certain select lines to a virtual machine or container.
- Warn if the gpio-line-names is too long in he DT parser core.
- GPIO lines can now be looked up by line name in addition to being
looked up by offset.
New drivers:
- A new generic regmap GPIO driver has been merged. Too many regmap
drivers are starting to look like each other so we need to create
some common ground and try to move drivers over to using that.
- The F7188X driver now supports F81865.
Driver improvements:
- Large improvements to the PCA953x expander, get multiple lines and
several cleanups.
- Large improvements to the DesignWare DWAPB driver, and Sergey Semin
has volunteered to maintain it.
- PL061 can now be built as a module, this is part of a bigger effort
to make the ARM platforms more modular"
* tag 'gpio-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
gpio: pca953x: Drop unneeded ACPI_PTR()
MAINTAINERS: Add gpio regmap section
gpio: add a reusable generic gpio_chip using regmap
gpiolib: Introduce gpiochip_irqchip_add_domain()
gpio: gpiolib: Allow GPIO IRQs to lazy disable
gpiolib: Separate GPIO_GET_LINEINFO_WATCH_IOCTL conditional
gpio: rcar: Fix runtime PM imbalance on error
gpio: pca935x: Allow IRQ support for driver built as a module
gpio: pxa: Add COMPILE_TEST support
dt-bindings: gpio: Add renesas,em-gio bindings
MAINTAINERS: Fix file name for DesignWare GPIO DT schema
gpio: dwapb: Remove unneeded has_irq member in struct dwapb_port_property
gpio: dwapb: Don't use IRQ 0 as valid Linux interrupt
gpio: dwapb: avoid error message for optional IRQ
gpio: dwapb: Call acpi_gpiochip_free_interrupts() on GPIO chip de-registration
gpio: max730x: bring gpiochip_add_data after port config
MAINTAINERS: Add GPIO Aggregator section
docs: gpio: Add GPIO Aggregator documentation
gpio: Add GPIO Aggregator
gpiolib: Add support for GPIO lookup by line name
...
Linus Torvalds [Fri, 5 Jun 2020 20:58:04 +0000 (13:58 -0700)]
Merge tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A few small fixes for things, nothing earth shattering"
* tag 'for-linus-5.8-1' of git://github.com/cminyard/linux-ipmi:
ipmi:ssif: Remove dynamic platform device handing
Try to load acpi_ipmi when an SSIF ACPI IPMI interface is added
ipmi_si: Load acpi_ipmi when ACPI IPMI interface added
ipmi:bt-bmc: Fix error handling and status check
ipmi: Replace guid_copy() with import_guid() where it makes sense
ipmi: use vzalloc instead of kmalloc for user creation
ipmi:bt-bmc: Fix some format issue of the code
ipmi:bt-bmc: Avoid unnecessary check
Linus Torvalds [Fri, 5 Jun 2020 20:51:49 +0000 (13:51 -0700)]
Merge tag 'vfio-v5.8-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Block accesses to disabled MMIO space (Alex Williamson)
- VFIO device migration API (Kirti Wankhede)
- type1 IOMMU dirty bitmap API and implementation (Kirti Wankhede)
- PCI NULL capability masking (Alex Williamson)
- Memory leak fixes (Qian Cai)
- Reference leak fix (Qiushi Wu)
* tag 'vfio-v5.8-rc1' of git://github.com/awilliam/linux-vfio:
vfio iommu: typecast corrections
vfio iommu: Use shift operation for 64-bit integer division
vfio/mdev: Fix reference count leak in add_mdev_supported_type
vfio: Selective dirty page tracking if IOMMU backed device pins pages
vfio iommu: Add migration capability to report supported features
vfio iommu: Update UNMAP_DMA ioctl to get dirty bitmap before unmap
vfio iommu: Implementation of ioctl for dirty pages tracking
vfio iommu: Add ioctl definition for dirty pages tracking
vfio iommu: Cache pgsize_bitmap in struct vfio_iommu
vfio iommu: Remove atomicity of ref_count of pinned pages
vfio: UAPI for migration interface for device state
vfio/pci: fix memory leaks of eventfd ctx
vfio/pci: fix memory leaks in alloc_perm_bits()
vfio-pci: Mask cap zero
vfio-pci: Invalidate mmaps and block MMIO access on disabled memory
vfio-pci: Fault mmaps to enable vma tracking
vfio/type1: Support faulting PFNMAP vmas
Linus Torvalds [Fri, 5 Jun 2020 20:45:21 +0000 (13:45 -0700)]
Merge tag 'core_core_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull READ_IMPLIES_EXEC changes from Borislav Petkov:
"Split the old READ_IMPLIES_EXEC workaround from executable
PT_GNU_STACK now that toolchains long support PT_GNU_STACK marking and
there's no need anymore to force modern programs into having all its
user mappings executable instead of only the stack and the PROT_EXEC
ones.
Disable that automatic READ_IMPLIES_EXEC forcing on x86-64 and
arm64.
Add tables documenting how READ_IMPLIES_EXEC is handled on x86-64, arm
and arm64.
By Kees Cook"
* tag 'core_core_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64/elf: Disable automatic READ_IMPLIES_EXEC for 64-bit address spaces
arm32/64/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK
arm32/64/elf: Add tables to document READ_IMPLIES_EXEC
x86/elf: Disable automatic READ_IMPLIES_EXEC on 64-bit
x86/elf: Split READ_IMPLIES_EXEC from executable PT_GNU_STACK
x86/elf: Add table to document READ_IMPLIES_EXEC
Linus Torvalds [Fri, 5 Jun 2020 19:39:30 +0000 (12:39 -0700)]
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
Linus Torvalds [Fri, 5 Jun 2020 19:31:16 +0000 (12:31 -0700)]
Merge tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
- Harden CONFIG_STRICT_MODULE_RWX by rejecting any module that has
SHF_WRITE|SHF_EXECINSTR sections
- Remove and clean up nested #ifdefs, as it makes code hard to read
* tag 'modules-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Harden STRICT_MODULE_RWX
module: break nested ARCH_HAS_STRICT_MODULE_RWX and STRICT_MODULE_RWX #ifdefs
Eric Biggers [Thu, 4 Jun 2020 19:01:26 +0000 (12:01 -0700)]
dm crypt: avoid truncating the logical block size
queue_limits::logical_block_size got changed from unsigned short to
unsigned int, but it was forgotten to update crypt_io_hints() to use the
new type. Fix it.
Fixes: 47f50cdf5154 ("block: fix an integer overflow in logical block size") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mike Snitzer [Wed, 27 May 2020 20:32:51 +0000 (16:32 -0400)]
dm mpath: restrict queue_if_no_path state machine
Do not allow saving disabled queue_if_no_path if already saved as
enabled; implies multiple suspends (which shouldn't ever happen). Log
if this unlikely scenario is ever triggered.
Also, only write MPATHF_SAVED_QUEUE_IF_NO_PATH during presuspend or if
"fail_if_no_path" message. MPATHF_SAVED_QUEUE_IF_NO_PATH is no longer
always modified, e.g.: even if queue_if_no_path()'s save_old_value
argument wasn't set. This just implies a bit tighter control over
the management of MPATHF_SAVED_QUEUE_IF_NO_PATH. Side-effect is
multipath_resume() doesn't reset MPATHF_QUEUE_IF_NO_PATH unless
MPATHF_SAVED_QUEUE_IF_NO_PATH was set (during presuspend); and at that
time the MPATHF_SAVED_QUEUE_IF_NO_PATH bit gets cleared. So
MPATHF_SAVED_QUEUE_IF_NO_PATH's use is much more narrow in scope.
Last, but not least, do _not_ disable queue_if_no_path during noflush
suspend. There is no need/benefit to saving off queue_if_no_path via
MPATHF_SAVED_QUEUE_IF_NO_PATH and clearing MPATHF_QUEUE_IF_NO_PATH for
noflush suspend -- by avoiding this needless queue_if_no_path flag
churn there is less potential for MPATHF_QUEUE_IF_NO_PATH to get lost.
Which avoids potential for IOs to be errored back up to userspace
during DM multipath's handling of path failures.
That said, this last change papers over a reported issue concerning
request-based dm-multipath's interaction with blk-mq, relative to
suspend and resume: multipath_endio is being called _before_
multipath_resume. This should never happen if DM suspend's
blk_mq_quiesce_queue() + dm_wait_for_completion() is genuinely waiting
for all inflight blk-mq requests to complete. Similarly:
drivers/md/dm.c:__dm_resume() clearly calls dm_table_resume_targets()
_before_ dm_start_queue()'s blk_mq_unquiesce_queue() is called. If
the queue isn't even restarted until after multipath_resume(); the BIG
question that still needs answering is: how can multipath_end_io beat
multipath_resume in a race!?
Mike Snitzer [Tue, 26 May 2020 20:06:56 +0000 (16:06 -0400)]
dm mpath: simplify __must_push_back
Remove micro-optimization that infers device is between presuspend and
resume (was done purely to avoid call to dm_noflush_suspending, which
isn't expensive anyway).
Remove flags argument since they are no longer checked.
And remove must_push_back_bio() since it was simply a call to
__must_push_back().
Hannes Reinecke [Tue, 2 Jun 2020 11:09:53 +0000 (13:09 +0200)]
dm zoned: allocate zone by device index
When allocating a zone, pass in an indicator on which device the zone
should be allocated; this increases performance for a multi-device
setup because reclaim will now allocate zones on the device for which
reclaim is running.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Hannes Reinecke [Tue, 2 Jun 2020 11:09:50 +0000 (13:09 +0200)]
dm zoned: per-device reclaim
Instead of having one reclaim workqueue for the entire set we should
be allocating a reclaim workqueue per device; doing so will reduce
contention and should boost performance for a multi-device setup.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Hannes Reinecke [Tue, 2 Jun 2020 11:09:47 +0000 (13:09 +0200)]
dm zoned: allocate temporary superblock for tertiary devices
Checking the tertiary superblock just consists of validating UUIDs,
crcs, and the generation number; it doesn't have contents which would
be required during the actual operation.
So allocate a temporary superblock when checking tertiary devices to
avoid having to store it together with the 'real' superblocks.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Hannes Reinecke [Tue, 2 Jun 2020 11:09:46 +0000 (13:09 +0200)]
dm zoned: convert to xarray
The zones array is getting really large, and large arrays tend to
wreak havoc with the CPU caches. So convert it to xarray to become
more cache friendly.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> # fix leak in dmz_insert Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mikulas Patocka [Tue, 2 Jun 2020 13:34:41 +0000 (15:34 +0200)]
dm ebs: use dm_bufio_forget_buffers
Use dm_bufio_forget_buffers instead of a block-by-block loop that
calls dm_bufio_forget. dm_bufio_forget_buffers is faster than the loop
because it searches for used buffers using rb-tree.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mikulas Patocka [Tue, 2 Jun 2020 13:34:39 +0000 (15:34 +0200)]
dm bufio: clean up rbtree block ordering
dm-bufio uses unnatural ordering in the rb-tree - blocks with smaller
numbers were put to the right node and blocks with bigger numbers were
put to the left node.
Reverse that logic so that it's natural.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Linus Torvalds [Fri, 5 Jun 2020 18:18:53 +0000 (11:18 -0700)]
Merge tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"Misc changes:
- Unexport various PAT primitives
- Unexport per-CPU tlbstate and uninline TLB helpers"
* tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
x86/tlb/uv: Add a forward declaration for struct flush_tlb_info
x86/cpu: Export native_write_cr4() only when CONFIG_LKTDM=m
x86/tlb: Restrict access to tlbstate
xen/privcmd: Remove unneeded asm/tlb.h include
x86/tlb: Move PCID helpers where they are used
x86/tlb: Uninline nmi_uaccess_okay()
x86/tlb: Move cr4_set_bits_and_update_boot() to the usage site
x86/tlb: Move paravirt_tlb_remove_table() to the usage site
x86/tlb: Move __flush_tlb_all() out of line
x86/tlb: Move flush_tlb_others() out of line
x86/tlb: Move __flush_tlb_one_kernel() out of line
x86/tlb: Move __flush_tlb_one_user() out of line
x86/tlb: Move __flush_tlb_global() out of line
x86/tlb: Move __flush_tlb() out of line
x86/alternatives: Move temporary_mm helpers into C
x86/cr4: Sanitize CR4.PCE update
x86/cpu: Uninline CR4 accessors
x86/tlb: Uninline __get_current_cr3_fast()
x86/mm: Use pgprotval_t in protval_4k_2_large() and protval_large_2_4k()
x86/mm: Unexport __cachemode2pte_tbl
...
Roberto Sassu [Fri, 5 Jun 2020 06:50:28 +0000 (08:50 +0200)]
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
To support multiple template digests, the static array entry->digest has
been replaced with a dynamically allocated array in commit 0d5f42f43b71
("ima: Switch to dynamically allocated buffer for template digests"). The
array is allocated in ima_alloc_init_template() and if the returned pointer
is NULL, ima_free_template_entry() is called.
However, (*entry)->template_desc is not yet initialized while it is used by
ima_free_template_entry(). This patch fixes the issue by directly freeing
*entry without calling ima_free_template_entry().
Linus Torvalds [Fri, 5 Jun 2020 03:14:18 +0000 (20:14 -0700)]
Merge tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The remainder of the code necessary to support the Kendryte K210:
* Support for building device trees into the kernel, as the K210
doesn't have a bootloader that provides one
* A K210 device tree and the associated defconfig update
* Support for skipping PMP initialization on systems that trap on
PMP accesses rather than treating them as WARL
- Support for KGDB
- Improvements to text patching
- Some cleanups to the SiFive L2 cache driver
* tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
soc: sifive: l2 cache: Mark l2_get_priv_group as static
soc: sifive: l2 cache: Eliminate an unsigned zero compare warning
riscv: Add support to determine no. of L2 cache way enabled
riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure
riscv: Use text_mutex instead of patch_lock
riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation
riscv: Remove the 'riscv_' prefix of function name
riscv: Add SW single-step support for KDB
riscv: Use the XML target descriptions to report 3 system registers
riscv: Add KGDB support
kgdb: Add kgdb_has_hit_break function
RISC-V: Skip setting up PMPs on traps
riscv: K210: Update defconfig
riscv: K210: Add a built-in device tree
riscv: Allow device trees to be built into the kernel
Linus Torvalds [Fri, 5 Jun 2020 03:02:14 +0000 (20:02 -0700)]
Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM devicetree updates from Arnd Bergmann:
"This is the set of device tree changes, mostly covering new hardware
support, with 577 patches touching a little over 500 files.
There are five new Arm SoCs supported in this release, all of them for
existing SoC families:
- Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
devices and Android Set-top-box designs, along with the
"Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
single-board computer.
- Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
the iW-RainboW-G21D-Qseven-RZG1H board/SoM
- Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
Advance game console
Newly added machines on already supported SoCs are:
- AMLogic S905D based Smartlabs SML-5442TW TV box
- AMLogic S905X3 based ODROID-C4 SBC
- AMLogic S922XH based Beelink GT-King Pro TV box
- Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC
- Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
OpenPower P9 "Nicole"
- Marvell Kirkwood based Check Point L-50 router
- Mediatek MT8173 based Elm/Hana Chromebook laptops
Linus Torvalds [Fri, 5 Jun 2020 02:56:20 +0000 (19:56 -0700)]
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
Linus Torvalds [Fri, 5 Jun 2020 02:54:15 +0000 (19:54 -0700)]
Merge tag 'arm-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfig updates from Arnd Bergmann:
"These are the usual updates to arm/arm64 defconfig files, enabling
newly added drivers and addressing changes to Kconfig files"
* tag 'arm-defconfig-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
ARM: imx_v6_v7_defconfig: extend RN5T618 PMIC family support
arm64: defconfig: enable Qualcomm IPA and RMNet modules
arm64: defconfig: Add LEDS_TRIGGER_TIMER
arm64: defconfig: Enable UACCE/PCI PASID/SEC2/HPRE configs
arm64: defconfig: Enable Qualcomm SC7180 pinctrl and gcc
arm64: defconfig: Remove QCOM_GLINK_SSR
ARM: multi_v7_defconfig: Enable r8a7742 SoC
ARM: shmobile: defconfig: Enable r8a7742 SoC
arm64: defconfig: enable meson gx audio as module
arm64: defconfig: Enable SM8250 GCC driver
ARM: defconfig: u8500: Enable new drivers for ux500
arm64: defconfig: Enable CONFIG_PINCTRL_IMX8DXL by default
arm64: configs: Enable sun50i cpufreq nvmem
ARM: shmobile: defconfig: Refresh for v5.7-rc1
ARM: defconfig: u8500: Enable new drivers for samsung-golden
ARM: configs: sunxi: Add sun8i analog codec
arm64: defconfig: Enable Qualcomm CAMCC, CAMSS and CCI drivers
ARM: configs: at91: sama5: enable MCP16502 regulator
ARM: configs: at91: sama5: enable SAMA5D2_PIOBU
ARM: exynos_defconfig: Compile MAC80211/CFG80211 as modules
...
Linus Torvalds [Fri, 5 Jun 2020 02:47:11 +0000 (19:47 -0700)]
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
Nick Desaulniers [Fri, 14 Feb 2020 22:18:11 +0000 (14:18 -0800)]
Kconfig: add config option for asm goto w/ outputs
This allows C code to make use of compilers with support for output
variables along the fallthrough path via preprocessor define:
CONFIG_CC_HAS_ASM_GOTO_OUTPUT
[ This is not used anywhere yet, and currently released compilers don't
support this yet, but it's coming, and I have some local experimental
patches to take advantage of it when it does - Linus ]
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 5 Jun 2020 02:18:29 +0000 (19:18 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge yet more updates from Andrew Morton:
- More MM work. 100ish more to go. Mike Rapoport's "mm: remove
__ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue
- Various other little subsystems
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
lib/ubsan.c: fix gcc-10 warnings
tools/testing/selftests/vm: remove duplicate headers
selftests: vm: pkeys: fix multilib builds for x86
selftests: vm: pkeys: use the correct page size on powerpc
selftests/vm/pkeys: override access right definitions on powerpc
selftests/vm/pkeys: test correct behaviour of pkey-0
selftests/vm/pkeys: introduce a sub-page allocator
selftests/vm/pkeys: detect write violation on a mapped access-denied-key page
selftests/vm/pkeys: associate key on a mapped page and detect write violation
selftests/vm/pkeys: associate key on a mapped page and detect access violation
selftests/vm/pkeys: improve checks to determine pkey support
selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust()
selftests/vm/pkeys: fix number of reserved powerpc pkeys
selftests/vm/pkeys: introduce powerpc support
selftests/vm/pkeys: introduce generic pkey abstractions
selftests: vm: pkeys: use the correct huge page size
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
selftests/vm/pkeys: fix pkey_disable_clear()
selftests: vm: pkeys: add helpers for pkey bits
...
Sandipan Das [Thu, 4 Jun 2020 23:52:54 +0000 (16:52 -0700)]
selftests: vm: pkeys: fix multilib builds for x86
This ensures that both 32-bit and 64-bit binaries are generated when this
is built on a x86_64 system. Most of the changes have been borrowed from
tools/testing/selftests/x86/Makefile.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/0326a442214d7a1b970d38296e63df3b217f5912.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sandipan Das [Thu, 4 Jun 2020 23:52:50 +0000 (16:52 -0700)]
selftests: vm: pkeys: use the correct page size on powerpc
Both 4K and 64K pages are supported on powerpc. Parts of the selftest
code perform alignment computations based on the PAGE_SIZE macro which is
currently hardcoded to 64K for powerpc. This causes some test failures on
kernels configured with 4K page size.
In some cases, we need to enforce function alignment on page size. Since
this can only be done at build time, 64K is used as the alignment factor
as that also ensures 4K alignment.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/5dcdfbf3353acdc90f315172e800b49f5ca21299.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ram Pai [Thu, 4 Jun 2020 23:52:25 +0000 (16:52 -0700)]
selftests/vm/pkeys: improve checks to determine pkey support
For the pkeys subsystem to work, both the CPU and the kernel need to have
support. So, additionally check if the kernel supports pkeys apart from
the CPU feature checks.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/8fb76c63ebdadcf068ecd2d23731032e195cd364.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ram Pai [Thu, 4 Jun 2020 23:52:22 +0000 (16:52 -0700)]
selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust()
Some pkeys which are valid on the hardware are reserved and not available
for application use. These keys cannot be allocated.
test_pkey_alloc_exhaust() tries to account for these and has an assertion
which validates if all available pkeys have been exahaustively allocated.
However, the expression that is currently used is only valid for x86. On
powerpc, a pkey is additionally reserved as compared to x86. Hence, the
assertion is made to use an arch-specific helper to get the correct count
of reserved pkeys.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/38b08d0318820ae46af3aa6048384fd8056c3df7.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ram Pai [Thu, 4 Jun 2020 23:52:15 +0000 (16:52 -0700)]
selftests/vm/pkeys: introduce powerpc support
This makes use of the abstractions added earlier and introduces support
for powerpc.
For powerpc, after receiving the SIGSEGV, the signal handler must
explicitly restore access permissions for the faulting pkey to allow the
test to continue. As this makes use of pkey_access_allow(), all of its
dependencies and other similar functions have been moved ahead of the
signal handler.
[sandipan@linux.ibm.com: fix powerpc access right updates] Link: http://lkml.kernel.org/r/5f65cf37be993760de8112a88da194e3ccbb2bf8.1588959697.git.sandipan@linux.ibm.com Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/b121e9fd33789ed9195276e32fe4e80bb6b88a31.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sandipan Das [Thu, 4 Jun 2020 23:52:08 +0000 (16:52 -0700)]
selftests: vm: pkeys: use the correct huge page size
The huge page size can vary across architectures. This will ensure that
the correct huge page size is used when accessing the hugetlb controls
under sysfs. Instead of using a hardcoded page size (i.e. 2MB), this now
uses the HPAGE_SIZE macro which is arch-specific.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/66882a5d6e45c73c3a52bc4aef9754e48afa4f88.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ram Pai [Thu, 4 Jun 2020 23:52:01 +0000 (16:52 -0700)]
selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
In some cases, a pkey's bits need not necessarily change in a way that the
value of the pkey register increases when performing a pkey_disable_set()
or decreases when performing a pkey_disable_clear().
For example, on powerpc, if a pkey's current state is PKEY_DISABLE_ACCESS
and we perform a pkey_write_disable() on it, the bits still remain the
same. We will observe something similar when the pkey's current state is
0 and a pkey_access_enable() is performed on it.
Either case would cause some assertions to fail. This fixes the problem.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/8240665131e43fc93eed4eea8194676c1ea39a7f.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ram Pai [Thu, 4 Jun 2020 23:51:58 +0000 (16:51 -0700)]
selftests/vm/pkeys: fix pkey_disable_clear()
Currently, pkey_disable_clear() sets the specified bits instead clearing
them. This has been dead code up to now because its only callers i.e.
pkey_access/write_allow() are also unused.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/1f70bca60330a85dca42c3cd98212bb1cdf5a076.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sandipan Das [Thu, 4 Jun 2020 23:51:54 +0000 (16:51 -0700)]
selftests: vm: pkeys: add helpers for pkey bits
This introduces some functions that help with setting or clearing bits of
a particular pkey. This also adds an abstraction for getting a pkey's bit
position in the pkey register as this may vary across architectures.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/2ad9705f4f68ca7e72155cc583415e5a979546f1.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sandipan Das [Thu, 4 Jun 2020 23:51:51 +0000 (16:51 -0700)]
selftests: vm: pkeys: Use sane types for pkey register
The size of the pkey register can vary across architectures. This
converts the data type of all its references to u64 in preparation for
multi-arch support.
To keep the definition of the u64 type consistent and remove format
specifier related warnings, __SANE_USERSPACE_TYPES__ is defined as
suggested by Michael Ellerman.
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/d3e271798455d940e395e56e1ff1e82a31bcb7aa.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ram Pai [Thu, 4 Jun 2020 23:51:34 +0000 (16:51 -0700)]
selftests/x86/pkeys: move selftests to arch-neutral directory
Patch series "selftests, powerpc, x86: Memory Protection Keys", v19.
Memory protection keys enables an application to protect its address space
from inadvertent access by its own code.
This feature is now enabled on powerpc and has been available since
4.16-rc1. The patches move the selftests to arch neutral directory and
enhance their test coverage.
Tested on powerpc64 and x86_64 (Skylake-SP).
This patch (of 24):
Move selftest files from tools/testing/selftests/x86/ to
tools/testing/selftests/vm/.
Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Michal Suchanek <msuchanek@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuah@kernel.org> Link: http://lkml.kernel.org/r/14d25194c3e2e652e0047feec4487e269e76e8c9.1585646528.git.sandipan@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pengcheng Yang [Thu, 4 Jun 2020 23:51:30 +0000 (16:51 -0700)]
kernel/relay.c: fix read_pos error when multiple readers
When reading, read_pos should start with bytes_consumed, not file->f_pos.
Because when there is more than one reader, the read_pos corresponding to
file->f_pos may have been consumed, which will cause the data that has
been consumed to be read and the bytes_consumed update error.
Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jann Horn <jannh@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk>e Link: http://lkml.kernel.org/r/1579691175-28949-1-git-send-email-yangpc@wangsu.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Axtens [Thu, 4 Jun 2020 23:51:27 +0000 (16:51 -0700)]
kernel/relay.c: handle alloc_percpu returning NULL in relay_open
alloc_percpu() may return NULL, which means chan->buf may be set to NULL.
In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an
invalid pointer:
BUG: Unable to handle kernel data access at 0x7dae0000
Faulting instruction address: 0xc0000000003f3fec
...
NIP relay_open+0x29c/0x600
LR relay_open+0x270/0x600
Call Trace:
relay_open+0x264/0x600 (unreliable)
__blk_trace_setup+0x254/0x600
blk_trace_setup+0x68/0xa0
sg_ioctl+0x7bc/0x2e80
do_vfs_ioctl+0x13c/0x1300
ksys_ioctl+0x94/0x130
sys_ioctl+0x48/0xb0
system_call+0x5c/0x68
Check if alloc_percpu returns NULL.
This was found by syzkaller both on x86 and powerpc, and the reproducer
it found on powerpc is capable of hitting the issue as an unprivileged
user.
Fixes: 68716c92eb63 ("relay: Use per CPU constructs for the relay channel buffer pointers") Reported-by: syzbot+1e925b4b836afe85a1c6@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+587b2421926808309d21@syzkaller-ppc64.appspotmail.com Reported-by: syzbot+58320b7171734bf79d26@syzkaller.appspotmail.com Reported-by: syzbot+d6074fb08bdb2e010520@syzkaller.appspotmail.com Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Akash Goel <akash.goel@intel.com> Cc: Andrew Donnellan <ajd@linux.ibm.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Salvatore Bonaccorso <carnil@debian.org> Cc: <stable@vger.kernel.org> [4.10+] Link: http://lkml.kernel.org/r/20191219121256.26480-1-dja@axtens.net Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code was using get_user_pages_fast(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's time
to convert the get_user_pages_fast() + put_page() calls to
pin_user_pages_fast() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/20200517235620.205225-3-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rapidio: avoid data race between file operation callbacks and mport_cdev_add().
Fields of md(mport_dev) are set after cdev_device_add(). However, the
file operation callbacks can be called after cdev_device_add() and
therefore accesses to fields of md in the callbacks can race with the rest
of the mport_cdev_add() function.
One such example is INIT_LIST_HEAD(&md->portwrites) in mport_cdev_add(),
the list is initialised after cdev_device_add(). This can race with
list_add_tail(&pw_filter->md_node,&md->portwrites) in
rio_mport_add_pw_filter() which is called by unlocked_ioctl.
To avoid such data races use cdev_device_add() after initializing md.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alexandre Bounine <alex.bou9@gmail.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mike Marshall <hubcap@omnibond.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Pavel Andrianov <andrianov@ispras.ru> Link: http://lkml.kernel.org/r/20200426112950.1803-1-madhuparnabhowmik10@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently copy_string_kernel is just a wrapper around copy_strings that
simplifies the calling conventions and uses set_fs to allow passing a
kernel pointer. But due to the fact the we only need to handle a single
kernel argument pointer, the logic can be sigificantly simplified while
getting rid of the set_fs.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Link: http://lkml.kernel.org/r/20200501104105.2621149-3-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "seq_file: Introduce DEFINE_SEQ_ATTRIBUTE() helper macro".
As discussed in
https://lore.kernel.org/lkml/20191129222310.GA3712618@kroah.com/, we could
introduce a new helper macro to reduce losts of boilerplate code, vmstat
and kprobes is the example which covert to use it, if this is accepted, I
will send out more cleanups.
This patch (of 3):
Introduce DEFINE_SEQ_ATTRIBUTE() helper macro to decrease code duplication.
[akpm@linux-foundation.org: coding style fixes] Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: http://lkml.kernel.org/r/20200509064031.181091-1-wangkefeng.wang@huawei.com Link: http://lkml.kernel.org/r/20200509064031.181091-2-wangkefeng.wang@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OGAWA Hirofumi [Thu, 4 Jun 2020 23:50:59 +0000 (16:50 -0700)]
fat: improve the readahead for FAT entries
Current readahead for FAT entries is very simple but is having some flaws,
so it is not working well for some environments. This patch improves the
readahead more or less.
The key points of modification are,
- make the readahead size tunable by using bdi->ra_pages
- care the bdi->io_pages to avoid the small size I/O request
- update readahead window before fully exhausting
Chris Down [Thu, 4 Jun 2020 23:50:53 +0000 (16:50 -0700)]
init: allow distribution configuration of default init
Some init systems (eg. systemd) have init at their own paths, for
example, /usr/lib/systemd/systemd. A compatibility symlink to one of the
hardcoded init paths is provided by another package, usually named
something like systemd-sysvcompat or similar.
Currently distro maintainers who are hands-off on the bootloader are more
or less required to include those compatibility links as part of their
base distribution, because it's hard to migrate away from them since
there's a risk some users will not get the message to set init= on the
kernel command line appropriately.
Moreover, for distributions where the init system is something the
distribution itself is opinionated about (eg. Arch, which has systemd in
the required `base` package), we could usually reasonably configure this
ahead of time when building the distribution kernel. However, we
currently simply don't have any way to configure the kernel to do this.
Here's an example discussion where removing sysvcompat was discussed by
distro maintainers[0].
This patch adds a new Kconfig tunable, CONFIG_DEFAULT_INIT, which if set
is tried before the hardcoded fallback list. So the order of precedence
is now thus:
1. init= on command line (on failure: panic)
2. CONFIG_DEFAULT_INIT (on failure: try #3)
3. Hardcoded fallback list (on failure: panic)
This new config parameter will allow distribution maintainers to move away
from these compatibility links safely, without having to worry that their
users might not have the right init=.
There are also two other benefits of this over having the distribution
maintain a symlink:
1. One of the value propositions over simply having distributions
maintain a /sbin/init symlink via a package is that it also frees
distributions which have a preferred default, but not mandatory, init
system from having their package manager fight with their users for
control of /{s,}bin/init. Instead, the distribution simply makes
their preference known in CONFIG_DEFAULT_INIT, and if the user
installs another init system and uninstalls the default one they can
still make use of /{s,}bin/init and friends for their own uses. This
makes more cases Just Work(tm) without the user having to perform
extra configuration via init=.
2. Since before this we don't know which path the distribution actually
_intends_ to serve init from, we don't pr_err if it is simply
missing, and usually will just silently put the user in a /bin/sh
shell. Now that the distribution can make a declaration of intent, we
can be more vocal when this init system fails to launch for any
reason, even if it's simply because no file exists at that location,
speeding up the palaver of init/mount dependency/etc debugging a bit.
ELFNOTE_START allows callers to specify flags for .pushsection assembler
directives. All callsites but ELF_NOTE use "a" for SHF_ALLOC. For vdso's
that explicitly use ELF_NOTE_START and BUILD_SALT, the same section is
specified twice after preprocessing, once with "a" flag, once without.
Example:
While GNU as allows this ordering, it warns for the opposite ordering,
making these directives position dependent. We'd prefer not to precisely
match this behavior in Clang's integrated assembler. Instead, the non
__ASSEMBLY__ definition of ELF_NOTE uses
__attribute__((section(".note.Linux"))) which is created with SHF_ALLOC,
so let's make the __ASSEMBLY__ definition of ELF_NOTE consistent with C
and just always use "a" flag.
This allows Clang to assemble a working mainline (5.6) kernel via:
$ make CC=clang AS=clang
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Fangrui Song <maskray@google.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://github.com/ClangBuiltLinux/linux/issues/913 Link: http://lkml.kernel.org/r/20200325231250.99205-1-ndesaulniers@google.com Debugged-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ifndef was added a long time ago to support archs that would define
their own mapping function. The last user was the metag arch which was
removed from the tree, and as such there are no users left. Let's kill
it.
checkpatch: use patch subject when reading from stdin
While "git am" can apply an mbox file containing multiple patches (e.g.
as created by b4[1], or a patch bundle downloaded from patchwork),
checkpatch does not have proper support for that. When operating on an
mbox, checkpatch will merge all detected tags, and complain falsely about
duplicates:
WARNING: Duplicate signature
As modifying checkpatch to reset state in between each patch is a lot of
work, a simple solution is splitting the mbox into individual patches, and
invoking checkpatch for each of them. Fortunately checkpatch can read a
patch from stdin, so the classic "formail" tool can be used to split the
mbox, and pipe all individual patches to checkpatch:
formail -s scripts/checkpatch.pl < my-mbox
However, when reading a patch file from standard input, checkpatch calls
it "Your patch", and reports its state as:
Your patch has style problems, please review.
or:
Your patch has no obvious style problems and is ready for submission.
Hence it can be difficult to identify which patches need to be reviewed
and improved.
Fix this by replacing "Your patch" by (the first line of) the email
subject, if present.
Note that "git mailsplit" can also be used to split an mbox, but it will
create individual files for each patch, thus requiring cleanup afterwards.
Formail does not have this disadvantage.
Joe Perches [Thu, 4 Jun 2020 23:50:36 +0000 (16:50 -0700)]
checkpatch: look for c99 comments in ctx_locate_comment
Some checks look for comments around a specific function like
read_barrier_depends.
Extend the check to support both c89 and c90 comment styles.
c89 /* comment */
or
c99 // comment
For c99 comments, only look a 3 single lines, the line being scanned,
the line above and the line below the line being scanned rather than
the patch diff context.
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/65cb075435d2f385a53c77571b491b2b09faaf8e.camel@perches.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a preferred order for the entries in MAINTAINERS sections.
See commits bcd4fa353379 ("MAINTAINERS: sort field names for all
entries") and 36ad598a68b9 ("MAINTAINERS: list the section entries in
the preferred order")
Add checkpatch tests to try to keep that ordering.
Clang normally does not warn about certain issues in inline functions when
it only happens in an eliminated code path. However if something else
goes wrong, it does tend to complain about the definition of hweight_long()
on 32-bit targets:
Test some bit clears/sets to make sure assembly doesn't change, and that
the set_bit and clear_bit functions work and don't cause sparse warnings.
Instruct Kbuild to build this file with extra warning level -Wextra, to
catch new issues, and also doesn't hurt to build with C=1.
This was used to test changes to arch/x86/include/asm/bitops.h.
In particular, sparse (C=1) was very concerned when the last bit before a
natural boundary, like 7, or 31, was being tested, as this causes sign
extension (0xffffff7f) for instance when clearing bit 7.
Recommended usage:
make defconfig
scripts/config -m CONFIG_TEST_BITOPS
make modules_prepare
make C=1 W=1 lib/test_bitops.ko
objdump -S -d lib/test_bitops.ko
insmod lib/test_bitops.ko
rmmod lib/test_bitops.ko
<check dmesg>, there should be no compiler/sparse warnings and no
error messages in log.
Link: http://lkml.kernel.org/r/20200310221747.2848474-2-jesse.brandeburg@intel.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de>
CcL Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the given type has fraction smaller than max_frac/FPROP_FRAC_BASE, the
code could be modified to call __fprop_inc_percpu() directly and easier to
understand. After this patch, fprop_reflect_period_percpu() will be
called twice, and quicky return on pl->period == p->period test, so it
would not result to significant downside of performance.
Thanks for Jan's guidance.
Signed-off-by: Tan Hu <tan.hu@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <xue.zhihong@zte.com.cn> Cc: Yi Wang <wang.yi59@zte.com.cn> Cc: <wang.liang82@zte.com.cn> Link: http://lkml.kernel.org/r/1589004753-27554-1-git-send-email-tan.hu@zte.com.cn Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann Horn [Thu, 4 Jun 2020 23:50:17 +0000 (16:50 -0700)]
lib/zlib: remove outdated and incorrect pre-increment optimization
The zlib inflate code has an old micro-optimization based on the
assumption that for pre-increment memory accesses, the compiler will
generate code that fits better into the processor's pipeline than what
would be generated for post-increment memory accesses.
This optimization was already removed in upstream zlib in 2016:
https://github.com/madler/zlib/commit/9aaec95e8211
This optimization causes UB according to C99, which says in section 6.5.6
"Additive operators": "If both the pointer operand and the result point to
elements of the same array object, or one past the last element of the
array object, the evaluation shall not produce an overflow; otherwise, the
behavior is undefined".
This UB is not only a theoretical concern, but can also cause trouble for
future work on compiler-based sanitizers.
According to the zlib commit, this optimization also is not optimal
anymore with modern compilers.
Replace uses of OFF, PUP and UP_UNALIGNED with their definitions in the
POSTINC case, and remove the macro definitions, just like in the upstream
patch.
projects / kernel.git / log