fs: move locking sysctls where they are used

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

The locking fs sysctls are only used on fs/locks.c, so move them there.

Link: https://lkml.kernel.org/r/20211129205548.605569-7-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: move shared sysctls to fs/sysctls.c

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move sysctls which are shared between filesystems into a common file
outside of kernel/sysctl.c.

Link: https://lkml.kernel.org/r/20211129205548.605569-6-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: move maxolduid as a sysctl specific const

The maxolduid value is only shared for sysctl purposes for use on a max
range.  Just stuff this into our shared const array.

[akpm@linux-foundation.org: fix sysctl_vals[], per Mickaël]

Link: https://lkml.kernel.org/r/20211129205548.605569-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: move dcache sysctls to its own file

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the dcache sysctl clutter out of kernel/sysctl.c.  This is a
small one-off entry, perhaps later we can simplify this representation,
but for now we use the helpers we have.  We won't know how we can
simplify this further untl we're fully done with the cleanup.

[arnd@arndb.de: avoid unused-function warning]
Link: https://lkml.kernel.org/r/20211203190123.874239-2-arnd@kernel.org
Link: https://lkml.kernel.org/r/20211129205548.605569-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: move fs stat sysctls to file_table.c

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

We can create the sysctl dynamically on early init for fs stat to help
with this clutter.  This dusts off the fs stat syctls knobs and puts
them into where they are declared.

Link: https://lkml.kernel.org/r/20211129205548.605569-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: move inode sysctls to its own file

Patch series "sysctl: 4th set of kernel/sysctl cleanups".

This is slimming down the fs uses of kernel/sysctl.c to the point that
the next step is to just get rid of the fs base directory for it and
move that elsehwere, so that next patch series starts dealing with that
to demo how we can end up cleaning up a full base directory from
kernel/sysctl.c, one at a time.

This patch (of 9):

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the inode sysctls to its own file.  Since we are no longer using
this outside of fs/ remove the extern declaration of its respective proc
helper.

We use early_initcall() as it is the earliest we can use.

[arnd@arndb.de: avoid unused-variable warning]
Link: https://lkml.kernel.org/r/20211203190123.874239-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20211129205548.605569-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20211129205548.605569-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: share unsigned long const values

Provide a way to share unsigned long values.  This will allow others to
not have to re-invent these values.

Link: https://lkml.kernel.org/r/20211124231435.1445213-9-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

stackleak: move stack_erasing sysctl to stackleak.c

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the stack_erasing sysctl from kernel/sysctl.c to
kernel/stackleak.c and use register_sysctl() to register the sysctl
interface.

[mcgrof@kernel.org: commit log update]

Link: https://lkml.kernel.org/r/20211124231435.1445213-8-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scsi/sg: move sg-big-buff sysctl to scsi/sg.c

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the sg-big-buff sysctl from kernel/sysctl.c to drivers/scsi/sg.c
and use register_sysctl() to register the sysctl interface.

[mcgrof@kernel.org: commit log update]

Link: https://lkml.kernel.org/r/20211124231435.1445213-7-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

printk: move printk sysctl to printk/sysctl.c

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move printk sysctl from kernel/sysctl.c to kernel/printk/sysctl.c.
Use register_sysctl() to register the sysctl interface.

[mcgrof@kernel.org: fixed compile issues when PRINTK is not set, commit log update]

Link: https://lkml.kernel.org/r/20211124231435.1445213-6-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs: move binfmt_misc sysctl to its own file

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

This moves the binfmt_misc sysctl to its own file to help remove clutter
from kernel/sysctl.c.

Link: https://lkml.kernel.org/r/20211124231435.1445213-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: add helper to register a sysctl mount point

The way to create a subdirectory on top of sysctl_mount_point is a bit
obscure, and *why* we do that even so more.  Provide a helper which
makes it clear why we do this.

[akpm@linux-foundation.org: export register_sysctl_mount_point() to
modules]

Link: https://lkml.kernel.org/r/20211124231435.1445213-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

random: move the random sysctl declarations to its own file

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the random sysctls to their own file and use
register_sysctl_init().

[mcgrof@kernel.org: commit log update to justify the move]

Link: https://lkml.kernel.org/r/20211124231435.1445213-3-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

firmware_loader: move firmware sysctl to its own files

Patch series "sysctl: 3rd set of kernel/sysctl cleanups", v2.

This is the third set of patches to help address cleaning the kitchen
seink in kernel/sysctl.c and to move sysctls away to where they are
actually implemented / used.

This patch (of 8):

kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the firmware configuration sysctl table to the only place where
it is used, and make it clear that if sysctls are disabled this is not
used.

[akpm@linux-foundation.org: export register_firmware_config_sysctl and unregister_firmware_config_sysctl to modules]
[akpm@linux-foundation.org: use EXPORT_SYMBOL_NS_GPL instead]
[sfr@canb.auug.org.au: fix that so it compiles]
Link: https://lkml.kernel.org/r/20211201160626.401d828d@canb.auug.org.au
[mcgrof@kernel.org: major commit log update to justify the move]

Link: https://lkml.kernel.org/r/20211124231435.1445213-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20211124231435.1445213-2-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eventpoll: simplify sysctl declaration with register_sysctl()

The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move the epoll_table sysctl to fs/eventpoll.c and use
register_sysctl().

Link: https://lkml.kernel.org/r/20211123202422.819032-9-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cdrom: simplify subdirectory registration with register_sysctl()

There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under.  Simplify this by using
register_sysctl() and specifying the directory path directly.

// pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH

@c1@
expression E1;
identifier subdir, sysctls;
@@

static struct ctl_table subdir[] = {
{
.procname = E1,
.maxlen = 0,
.mode = 0555,
.child = sysctls,
},
{ }
};

@c2@
identifier c1.subdir;

expression E2;
identifier base;
@@

static struct ctl_table base[] = {
{
.procname = E2,
.maxlen = 0,
.mode = 0555,
.child = subdir,
},
{ }
};

@c3@
identifier c2.base;
identifier header;
@@

header = register_sysctl_table(base);

@r1 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.subdir, c1.sysctls;
@@

-static struct ctl_table subdir[] = {
- {
- .procname = E1,
- .maxlen = 0,
- .mode = 0555,
- .child = sysctls,
- },
- { }
-};

@r2 depends on c1 && c2 && c3@
identifier c1.subdir;

expression c2.E2;
identifier c2.base;
@@
-static struct ctl_table base[] = {
- {
- .procname = E2,
- .maxlen = 0,
- .mode = 0555,
- .child = subdir,
- },
- { }
-};

@initialize:python@
@@

def make_my_fresh_expression(s1, s2):
  return '"' + s1.strip('"') + "/" + s2.strip('"') + '"'

@r3 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.sysctls;
expression c2.E2;
identifier c2.base;
identifier c3.header;
fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) };
@@

header =
-register_sysctl_table(base);
+register_sysctl(E3, sysctls);

Generated-by: Coccinelle SmPL
Link: https://lkml.kernel.org/r/20211123202422.819032-8-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

inotify: simplify subdirectory registration with register_sysctl()

There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under.  Simplify this by using
register_sysctl() and specifying the directory path directly.

Move inotify_user sysctl to inotify_user.c while at it to remove clutter
from kernel/sysctl.c.

[mcgrof@kernel.org: remember to register fanotify_table]
Link: https://lkml.kernel.org/r/YZ5A6iWLb0h3N3RC@bombadil.infradead.org
[mcgrof@kernel.org: update commit log to reflect new path we decided to take]

Link: https://lkml.kernel.org/r/20211123202422.819032-7-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test_sysctl: simplify subdirectory registration with register_sysctl()

There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under.  Simplify this by using
register_sysctl() and specifying the directory path directly.

// pycocci sysctl-subdir-register-sysctl-simplify.cocci lib/test_sysctl.c

@c1@
expression E1;
identifier subdir, sysctls;
@@

static struct ctl_table subdir[] = {
{
.procname = E1,
.maxlen = 0,
.mode = 0555,
.child = sysctls,
},
{ }
};

@c2@
identifier c1.subdir;

expression E2;
identifier base;
@@

static struct ctl_table base[] = {
{
.procname = E2,
.maxlen = 0,
.mode = 0555,
.child = subdir,
},
{ }
};

@c3@
identifier c2.base;
identifier header;
@@

header = register_sysctl_table(base);

@r1 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.subdir, c1.sysctls;
@@

-static struct ctl_table subdir[] = {
- {
- .procname = E1,
- .maxlen = 0,
- .mode = 0555,
- .child = sysctls,
- },
- { }
-};

@r2 depends on c1 && c2 && c3@
identifier c1.subdir;

expression c2.E2;
identifier c2.base;
@@
-static struct ctl_table base[] = {
- {
- .procname = E2,
- .maxlen = 0,
- .mode = 0555,
- .child = subdir,
- },
- { }
-};

@initialize:python@
@@

def make_my_fresh_expression(s1, s2):
  return '"' + s1.strip('"') + "/" + s2.strip('"') + '"'

@r3 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.sysctls;
expression c2.E2;
identifier c2.base;
identifier c3.header;
fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) };
@@

header =
-register_sysctl_table(base);
+register_sysctl(E3, sysctls);

Generated-by: Coccinelle SmPL
Link: https://lkml.kernel.org/r/20211123202422.819032-6-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: simplify subdirectory registration with register_sysctl()

There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under.  Simplify this by using
register_sysctl() and specifying the directory path directly.

// pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH

@c1@
expression E1;
identifier subdir, sysctls;
@@

static struct ctl_table subdir[] = {
{
.procname = E1,
.maxlen = 0,
.mode = 0555,
.child = sysctls,
},
{ }
};

@c2@
identifier c1.subdir;

expression E2;
identifier base;
@@

static struct ctl_table base[] = {
{
.procname = E2,
.maxlen = 0,
.mode = 0555,
.child = subdir,
},
{ }
};

@c3@
identifier c2.base;
identifier header;
@@

header = register_sysctl_table(base);

@r1 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.subdir, c1.sysctls;
@@

-static struct ctl_table subdir[] = {
- {
- .procname = E1,
- .maxlen = 0,
- .mode = 0555,
- .child = sysctls,
- },
- { }
-};

@r2 depends on c1 && c2 && c3@
identifier c1.subdir;

expression c2.E2;
identifier c2.base;
@@
-static struct ctl_table base[] = {
- {
- .procname = E2,
- .maxlen = 0,
- .mode = 0555,
- .child = subdir,
- },
- { }
-};

@initialize:python@
@@

def make_my_fresh_expression(s1, s2):
  return '"' + s1.strip('"') + "/" + s2.strip('"') + '"'

@r3 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.sysctls;
expression c2.E2;
identifier c2.base;
identifier c3.header;
fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) };
@@

header =
-register_sysctl_table(base);
+register_sysctl(E3, sysctls);

Generated-by: Coccinelle SmPL
Link: https://lkml.kernel.org/r/20211123202422.819032-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

macintosh/mac_hid.c: simplify subdirectory registration with register_sysctl()

There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under.  Simplify this by using
register_sysctl() and specifying the directory path directly.

// pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH

@c1@
expression E1;
identifier subdir, sysctls;
@@

static struct ctl_table subdir[] = {
{
.procname = E1,
.maxlen = 0,
.mode = 0555,
.child = sysctls,
},
{ }
};

@c2@
identifier c1.subdir;

expression E2;
identifier base;
@@

static struct ctl_table base[] = {
{
.procname = E2,
.maxlen = 0,
.mode = 0555,
.child = subdir,
},
{ }
};

@c3@
identifier c2.base;
identifier header;
@@

header = register_sysctl_table(base);

@r1 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.subdir, c1.sysctls;
@@

-static struct ctl_table subdir[] = {
- {
- .procname = E1,
- .maxlen = 0,
- .mode = 0555,
- .child = sysctls,
- },
- { }
-};

@r2 depends on c1 && c2 && c3@
identifier c1.subdir;

expression c2.E2;
identifier c2.base;
@@
-static struct ctl_table base[] = {
- {
- .procname = E2,
- .maxlen = 0,
- .mode = 0555,
- .child = subdir,
- },
- { }
-};

@initialize:python@
@@

def make_my_fresh_expression(s1, s2):
  return '"' + s1.strip('"') + "/" + s2.strip('"') + '"'

@r3 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.sysctls;
expression c2.E2;
identifier c2.base;
identifier c3.header;
fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) };
@@

header =
-register_sysctl_table(base);
+register_sysctl(E3, sysctls);

Generated-by: Coccinelle SmPL
Link: https://lkml.kernel.org/r/20211123202422.819032-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i915: simplify subdirectory registration with register_sysctl()

There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under.  Simplify this by using
register_sysctl() and specifying the directory path directly.

// pycocci sysctl-subdir-register-sysctl-simplify.cocci PATH

@c1@
expression E1;
identifier subdir, sysctls;
@@

static struct ctl_table subdir[] = {
{
.procname = E1,
.maxlen = 0,
.mode = 0555,
.child = sysctls,
},
{ }
};

@c2@
identifier c1.subdir;

expression E2;
identifier base;
@@

static struct ctl_table base[] = {
{
.procname = E2,
.maxlen = 0,
.mode = 0555,
.child = subdir,
},
{ }
};

@c3@
identifier c2.base;
identifier header;
@@

header = register_sysctl_table(base);

@r1 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.subdir, c1.sysctls;
@@

-static struct ctl_table subdir[] = {
- {
- .procname = E1,
- .maxlen = 0,
- .mode = 0555,
- .child = sysctls,
- },
- { }
-};

@r2 depends on c1 && c2 && c3@
identifier c1.subdir;

expression c2.E2;
identifier c2.base;
@@
-static struct ctl_table base[] = {
- {
- .procname = E2,
- .maxlen = 0,
- .mode = 0555,
- .child = subdir,
- },
- { }
-};

@initialize:python@
@@

def make_my_fresh_expression(s1, s2):
  return '"' + s1.strip('"') + "/" + s2.strip('"') + '"'

@r3 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.sysctls;
expression c2.E2;
identifier c2.base;
identifier c3.header;
fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) };
@@

header =
-register_sysctl_table(base);
+register_sysctl(E3, sysctls);

Generated-by: Coccinelle SmPL
Link: https://lkml.kernel.org/r/20211123202422.819032-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hpet: simplify subdirectory registration with register_sysctl()

Patch series "sysctl: second set of kernel/sysctl cleanups", v2.

This is the 2nd set of kernel/sysctl.c cleanups.  The diff stat should
reflect how this is a much better way to deal with theses.  Fortunately
coccinelle can be used to ensure correctness for most of these and/or
future merge conflicts.

Note that since this is part of a larger effort to cleanup
kernel/sysctl.c I think we have no other option but to go with merging
these patches in either Andrew's tree or keep them staged in a separate
tree and send a merge request later.  Otherwise kernel/sysctl.c will end
up becoming a sore spot for the next merge window.

This patch (of 8):

There is no need to user boiler plate code to specify a set of base
directories we're going to stuff sysctls under.  Simplify this by using
register_sysctl() and specifying the directory path directly.

// pycocci sysctl-subdir-register-sysctl-simplify.cocci drivers/char/hpet.c

@c1@
expression E1;
identifier subdir, sysctls;
@@

static struct ctl_table subdir[] = {
{
.procname = E1,
.maxlen = 0,
.mode = 0555,
.child = sysctls,
},
{ }
};

@c2@
identifier c1.subdir;

expression E2;
identifier base;
@@

static struct ctl_table base[] = {
{
.procname = E2,
.maxlen = 0,
.mode = 0555,
.child = subdir,
},
{ }
};

@c3@
identifier c2.base;
identifier header;
@@

header = register_sysctl_table(base);

@r1 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.subdir, c1.sysctls;
@@

-static struct ctl_table subdir[] = {
- {
- .procname = E1,
- .maxlen = 0,
- .mode = 0555,
- .child = sysctls,
- },
- { }
-};

@r2 depends on c1 && c2 && c3@
identifier c1.subdir;

expression c2.E2;
identifier c2.base;
@@
-static struct ctl_table base[] = {
- {
- .procname = E2,
- .maxlen = 0,
- .mode = 0555,
- .child = subdir,
- },
- { }
-};

@initialize:python@
@@

def make_my_fresh_expression(s1, s2):
  return '"' + s1.strip('"') + "/" + s2.strip('"') + '"'

@r3 depends on c1 && c2 && c3@
expression c1.E1;
identifier c1.sysctls;
expression c2.E2;
identifier c2.base;
identifier c3.header;
fresh identifier E3 = script:python(E2, E1) { make_my_fresh_expression(E2, E1) };
@@

header =
-register_sysctl_table(base);
+register_sysctl(E3, sysctls);

Generated-by: Coccinelle SmPL
Link: https://lkml.kernel.org/r/20211123202422.819032-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20211123202422.819032-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dnotify: move dnotify sysctl to dnotify.c

The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move dnotify sysctls to dnotify.c and use the new
register_sysctl_init() to register the sysctl interface.

[mcgrof@kernel.org: adjust the commit log to justify the move]

Link: https://lkml.kernel.org/r/20211123202347.818157-10-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

aio: move aio sysctl to aio.c

The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

Move aio sysctl to aio.c and use the new register_sysctl_init() to
register the sysctl interface for aio.

[mcgrof@kernel.org: adjust commit log to justify the move]

Link: https://lkml.kernel.org/r/20211123202347.818157-9-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: use SYSCTL_ZERO to replace some static int zero uses

Use the variable SYSCTL_ZERO to replace some static int boundary
variables with a value of 0 (minolduid, min_extfrag_threshold,
min_wakeup_granularity_ns).

Link: https://lkml.kernel.org/r/20211123202347.818157-8-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: use const for typically used max/min proc sysctls

When proc_dointvec_minmax() or proc_doulongvec_minmax() are used we are
using the extra1 and extra2 parameters on the sysctl table only for a
min and max boundary, these extra1 and extra2 arguments are then used
for read-only operations.  So make them const to reflect this.

[mcgrof@kernel.org: commit log love]

Link: https://lkml.kernel.org/r/20211123202347.818157-7-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: make ngroups_max const

ngroups_max is a read-only sysctl entry, reflecting NGROUPS_MAX.  Make
it const, in the same way as cap_last_cap.

Link: https://lkml.kernel.org/r/20211123202347.818157-6-mcgrof@kernel.org
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: move watchdog sysctl interface to watchdog.c

The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic of proc sysctl.

So, move the watchdog syscl interface to watchdog.c.  Use
register_sysctl() to register the sysctl interface to avoid merge
conflicts when different features modify sysctl.c at the same time.

[mcgrof@kernel.org: justify the move on the commit log]

Link: https://lkml.kernel.org/r/20211123202347.818157-5-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hung_task: move hung_task sysctl interface to hung_task.c

The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

So move hung_task sysctl interface to hung_task.c and use
register_sysctl() to register the sysctl interface.

[mcgrof@kernel.org: commit log refresh and fixed 2-3 0day reported compile issues]

Link: https://lkml.kernel.org/r/20211123202347.818157-4-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: move some boundary constants from sysctl.c to sysctl_vals

sysctl has helpers which let us specify boundary values for a min or max
int value.  Since these are used for a boundary check only they don't
change, so move these variables to sysctl_vals to avoid adding duplicate
variables.  This will help with our cleanup of kernel/sysctl.c.

[akpm@linux-foundation.org: update it for "mm/pagealloc: sysctl: change watermark_scale_factor max limit to 30%"]
[mcgrof@kernel.org: major rebase]

Link: https://lkml.kernel.org/r/20211123202347.818157-3-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl: add a new register_sysctl_init() interface

Patch series "sysctl: first set of kernel/sysctl cleanups", v2.

Finally had time to respin the series of the work we had started last
year on cleaning up the kernel/sysct.c kitchen sink.  People keeps
stuffing their sysctls in that file and this creates a maintenance
burden.  So this effort is aimed at placing sysctls where they actually
belong.

I'm going to split patches up into series as there is quite a bit of
work.

This first set adds register_sysctl_init() for uses of registerting a
sysctl on the init path, adds const where missing to a few places,
generalizes common values so to be more easy to share, and starts the
move of a few kernel/sysctl.c out where they belong.

The majority of rework on v2 in this first patch set is 0-day fixes.
Eric Biederman's feedback is later addressed in subsequent patch sets.

I'll only post the first two patch sets for now.  We can address the
rest once the first two patch sets get completely reviewed / Acked.

This patch (of 9):

The kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

Today though folks heavily rely on tables on kernel/sysctl.c so they can
easily just extend this table with their needed sysctls.  In order to
help users move their sysctls out we need to provide a helper which can
be used during code initialization.

We special-case the initialization use of register_sysctl() since it
*is* safe to fail, given all that sysctls do is provide a dynamic
interface to query or modify at runtime an existing variable.  So the
use case of register_sysctl() on init should *not* stop if the sysctls
don't end up getting registered.  It would be counter productive to stop
boot if a simple sysctl registration failed.

Provide a helper for init then, and document the recommended init levels
to use for callers of this routine.  We will later use this in
subsequent patches to start slimming down kernel/sysctl.c tables and
moving sysctl registration to the code which actually needs these
sysctls.

[mcgrof@kernel.org: major commit log and documentation rephrasing also moved to fs/proc/proc_sysctl.c                  ]

Link: https://lkml.kernel.org/r/20211123202347.818157-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20211123202347.818157-2-mcgrof@kernel.org
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Qing Wang <wangqing@vivo.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate.c: rework migration_entry_wait() to not take a pageref

This fixes the FIXME in migrate_vma_check_page().

Before migrating a page migration code will take a reference and check
there are no unexpected page references, failing the migration if there
are.  When a thread faults on a migration entry it will take a temporary
reference to the page to wait for the page to become unlocked signifying
the migration entry has been removed.

This reference is dropped just prior to waiting on the page lock,
however the extra reference can cause migration failures so it is
desirable to avoid taking it.

As migration code already has a reference to the migrating page an extra
reference to wait on PG_locked is unnecessary so long as the reference
can't be dropped whilst setting up the wait.

When faulting on a migration entry the ptl is taken to check the
migration entry.  Removing a migration entry also requires the ptl, and
migration code won't drop its page reference until after the migration
entry has been removed.  Therefore retaining the ptl of a migration
entry is sufficient to ensure the page has a reference.  Reworking
migration_entry_wait() to hold the ptl until the wait setup is complete
means the extra page reference is no longer needed.

[apopple@nvidia.com: v5]
Link: https://lkml.kernel.org/r/20211213033848.1973946-1-apopple@nvidia.com
Link: https://lkml.kernel.org/r/20211118020754.954425-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - fix for race condition that could lead to NULL pointer dereferences
   or UAF during uhid device destruction (Jann Horn)

 - contact count handling regression fixes for Wacom devices (Jason
   Gerecke)

 - fix for handling unnumbered HID reports handling in Google Vivaldi
   driver (Dmitry Torokhov)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: wacom: Avoid using stale array indicies to read contact count
  HID: wacom: Ignore the confidence flag when a touch is removed
  HID: wacom: Reset expected and received contact counts at the same time
  HID: uhid: Use READ_ONCE()/WRITE_ONCE() for ->running
  HID: uhid: Fix worker destroying device without any protection
  HID: vivaldi: Minor cleanups
  HID: vivaldi: fix handling devices not using numbered reports
  HID: Ignore battery for Elan touchscreen on HP Envy X360 15t-dr100

Merge tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Various little minor fixes that should go into this release:

   - Fix issue with cloned bios and IO accounting (Christoph)

   - Remove redundant assignments (Colin, GuoYong)

   - Fix an issue with the mq-deadline async_depth sysfs interface (me)

   - Fix brd module loading race (Tetsuo)

   - Shared tag map wakeup fix (Laibin)

   - End of bdev read fix (OGAWA)

   - srcu leak fix (Ming)"

* tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block:
  block: fix async_depth sysfs interface for mq-deadline
  block: Fix wrong offset in bio_truncate()
  block: assign bi_bdev for cloned bios in blk_rq_prep_clone
  block: cleanup q->srcu
  block: Remove unnecessary variable assignment
  brd: remove brd_devices_mutex mutex
  aoe: remove redundant assignment on variable n
  loop: remove redundant initialization of pointer node
  blk-mq: fix tag_get wait task can't be awakened

HID: wacom: Avoid using stale array indicies to read contact count

If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.

This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.

Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: cb03e4a3850c (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: Ignore the confidence flag when a touch is removed

AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.

This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 0f2e76dbd8f6 (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

HID: wacom: Reset expected and received contact counts at the same time

These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit 1db6fd29375a ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.

Later commits such as 0f2e76dbd8f6 (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.

Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 1db6fd29375a ("HID: wacom: generic: Support multiple tools per report")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'io_uring-5.17-2022-01-21' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Fix the io_uring POLLFREE handling, similarly to how it was done for
   aio (Pavel)

 - Remove (now) unused function (Jiapeng)

 - Small series fixing an issue with work cancelations. A window exists
   where work isn't locatable in the pending list, and isn't active in a
   worker yet either. (me)

* tag 'io_uring-5.17-2022-01-21' of git://git.kernel.dk/linux-block:
  io-wq: delete dead lock shuffling code
  io_uring: perform poll removal even if async work removal is successful
  io-wq: add intermediate work step between pending list and active work
  io-wq: perform both unstarted and started work cancelations in one go
  io-wq: invoke work cancelation with wqe->lock held
  io-wq: make io_worker lock a raw spinlock
  io-wq: remove useless 'work' argument to __io_worker_busy()
  io_uring: fix UAF due to missing POLLFREE handling
  io_uring: Remove unused function req_ref_put

Merge tag 'sound-fix-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A small set of HD-audio and USB-audio fixes as well as a couple of
  ALSA core fixes. Most of them are fix-ups for the newly added CS35L41
  codec"

* tag 'sound-fix-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/cs8409: Add new Warlock SKUs to patch_cs8409
  ALSA: core: Simplify snd_power_ref_and_wait() with the standard macro
  ALSA: hda: cs35l41: Make cs35l41_hda_remove() return void
  ALSA: hda: cs35l41: Tidyup code
  ALSA: hda: cs35l41: Make use of the helper function dev_err_probe()
  ALSA: hda: cs35l41: Add missing default cases
  ALSA: hda: cs35l41: Move cs35l41* calls to its own symbol namespace
  ALSA: hda: cs35l41: Add calls to newly added test key function
  ALSA: hda: cs35l41: Avoid overwriting register patch
  ALSA: core: Fix SSID quirk lookup for subvendor=0
  ALSA: usb-audio: add mapping for MSI MPG X570S Carbon Max Wifi.
  ALSA: hda/realtek: fix speakers and micmute on HP 855 G8

Merge tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Two new drivers this cycle and a significant rework of the CMOS driver
  make the bulk of the changes.

  I also carry powerpc changes with the agreement of Michael.

  New drivers:
   - Sunplus SP7021 RTC
   - Nintendo GameCube, Wii and Wii U RTC

  Driver updates:
   - cmos: refactor UIP handling and presence check, fix century
   - rs5c372: offset correction support, report low voltage
   - rv8803: Epson RX8804 support"

* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: sunplus: fix return value in sp_rtc_probe()
  rtc: cmos: Evaluate century appropriate
  rtc: gamecube: Fix an IS_ERR() vs NULL check
  rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
  dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
  rtc: pxa: fix null pointer dereference
  rtc: ftrtc010: Use platform_get_irq() to get the interrupt
  rtc: Move variable into switch case statement
  rtc: pcf2127: Fix typo in comment
  dt-bindings: rtc: Add Sunplus RTC json-schema
  rtc: Add driver for RTC in Sunplus SP7021
  rtc: rs5c372: fix incorrect oscillation value on r2221tl
  rtc: rs5c372: add offset correction support
  rtc: cmos: avoid UIP when writing alarm time
  rtc: cmos: avoid UIP when reading alarm time
  rtc: mc146818-lib: refactor mc146818_does_rtc_work
  rtc: mc146818-lib: refactor mc146818_get_time
  rtc: mc146818-lib: extract mc146818_avoid_UIP
  rtc: mc146818-lib: fix RTC presence check
  rtc: Check return value from mc146818_get_time()
  ...

Merge tag 'drm-next-2022-01-21' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Thanks to Daniel for taking care of things while I was out, just a set
  of merge window fixes that came in this week, two i915 display fixes
  and a bunch of misc amdgpu, along with a radeon regression fix.

  amdgpu:
   - SR-IOV fix
   - VCN harvest fix
   - Suspend/resume fixes
   - Tahiti fix
   - Enable GPU recovery on yellow carp

  radeon:
   - Fix error handling regression in radeon_driver_open_kms

  i915:
   - Update EHL display voltage swing table
   - Fix programming the ADL-P display TC voltage swing"

* tag 'drm-next-2022-01-21' of git://anongit.freedesktop.org/drm/drm:
  drm/radeon: fix error handling in radeon_driver_open_kms
  drm/amd/amdgpu: fixing read wrong pf2vf data in SRIOV
  drm/amdgpu: apply vcn harvest quirk
  drm/i915/display/adlp: Implement new step in the TC voltage swing prog sequence
  drm/i915/display/ehl: Update voltage swing table
  drm/amd/display: Revert W/A for hard hangs on DCN20/DCN21
  drm/amdgpu: drop flags check for CHIP_IP_DISCOVERY
  drm/amdgpu: Fix rejecting Tahiti GPUs
  drm/amdgpu: don't do resets on APUs which don't support it
  drm/amdgpu: invert the logic in amdgpu_device_should_recover_gpu()
  drm/amdgpu: Enable recovery on yellow carp

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "Some hot fixes for clk driver patches merged last week and one oops
  fix:

   - Fix license on recent MediaTek drivers

   - Initialize a variable before use in the new Visconti driver

   - Avoid an oops by unregistering the clk provider in si5341"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: mediatek: relicense mt7986 clock driver to GPL-2.0
  clk: visconti: Fix uninitialized variable in printk
  clk: si5341: Fix clock HW provider cleanup

Merge tag 'pci-v5.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci fix from Bjorn Helgaas:

 - Reserve "stolen memory" for integrated Intel GPU, even if it's not
   the first GPU to be enumerated (Lucas De Marchi)

* tag 'pci-v5.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/gpu: Reserve stolen memory for first integrated Intel GPU

Merge tag 's390-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

 - add Sven Schnelle as reviewer for s390 code

 - make uaccess code more readable

 - change cpu measurement facility code to also support counter second
   version number 7, and add discard support for limited samples

* tag 's390-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: add Sven Schnelle as reviewer
  s390/uaccess: introduce bit field for OAC specifier
  s390/cpumf: Support for CPU Measurement Sampling Facility LS bit
  s390/cpumf: Support for CPU Measurement Facility CSVN 7

Merge tag 'xfs-5.17-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull more xfs irix ioctl housecleaning from Darrick Wong:
 "Withdraw the XFS_IOC_ALLOCSP* and XFS_IOC_FREESP* ioctl definitions.

  This is the third and final of a series of small pull requests that
  perform some long overdue housecleaning of XFS ioctls. This time,
  we're withdrawing all variants of the ALLOCSP and FREESP ioctls from
  XFS' userspace API. This might be a little premature since we've only
  just removed the functionality, but as I pointed out in the last pull
  request, nobody (including fstests) noticed that it was broken for 20
  years.

  In response to the patch, we received a single comment from someone
  who stated that they 'augment' the ioctl for their own purposes, but
  otherwise acquiesced to the withdrawal. I still want to try to clobber
  these old ioctl definitions in 5.17.

  So remove the header definitions for these ioctls. The just-removed
  implementation has allowed callers to read stale disk contents for
  more than **21 years** and nobody noticed or complained, which implies
  a lack of users aside from exploit programs"

* tag 'xfs-5.17-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove the XFS_IOC_{ALLOC,FREE}SP* definitions

Merge tag 'xfs-5.17-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs irix ioctl housecleaning from Darrick Wong:
 "Remove the XFS_IOC_ALLOCSP* and XFS_IOC_FREESP* ioctl families.

  This is the second of a series of small pull requests that perform
  some long overdue housecleaning of XFS ioctls. This time, we're
  vacating the implementation of all variants of the ALLOCSP and FREESP
  ioctls, which are holdovers from EFS in Irix, circa 1993. Roughly
  equivalent functionality have been available for both ioctls since
  2.6.25 (April 2008):

   - XFS_IOC_FREESP ftruncates a file.

   - XFS_IOC_ALLOCSP is the equivalent of fallocate.

  As noted in the fix patch for CVE 2021-4155, the ALLOCSP ioctl has
  been serving up stale disk blocks since 2000, and in 21 years
  **nobody** noticed. On those grounds I think it's safe to vacate the
  implementation.

  Note that we lose the ability to preallocate and truncate relative to
  the current file position, but as nobody's ever implemented that for
  the VFS, I conclude that it's not in high demand.

  Linux has always used fallocate as the space management system call,
  whereas these Irix legacy ioctls only ever worked on XFS, and have
  been the cause of recent stale data disclosure vulnerabilities. As
  equivalent functionality is available elsewhere, remove the code"

* tag 'xfs-5.17-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: kill the XFS_IOC_{ALLOC,FREE}SP* ioctls

Merge tag 'xfs-5.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs ioctl housecleaning from Darrick Wong:
 "This is the first of a series of small pull requests that perform some
  long overdue housecleaning of XFS ioctls. This first pull request
  removes the FSSETDM ioctl, which was used to set DMAPI event
  attributes on XFS files. The DMAPI support has never been merged
  upstream and the implementation of FSSETDM itself was removed two
  years ago, so let's withdraw it completely.

   - Withdraw the ioctl definition for the FSSETDM ioctl"

* tag 'xfs-5.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: remove the XFS_IOC_FSSETDM definitions

Merge tag 'amd-drm-fixes-5.17-2022-01-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-5.17-2022-01-19:

amdgpu:
- SR-IOV fix
- VCN harvest fix
- Suspend/resume fixes
- Tahiti fix
- Enable GPU recovery on yellow carp

radeon:
- Fix error handling regression in radeon_driver_open_kms

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120013547.5649-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2022-01-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Latest updates for the EHL display voltage swing table (José Roberto de Souza)
- Additional step is required when programming the ADL-P display TC voltage swing (José Roberto de Souza)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yek1zdsnRPiBVvFF@tursulin-mobl2

block: fix async_depth sysfs interface for mq-deadline

A previous commit added this feature, but it inadvertently used the wrong
variable to show/store the setting from/to, victimized by copy/paste. Fix
it up so that the async_depth sysfs interface reads and writes from the
right setting.

Fixes: aabed89a729a ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215485
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'gpio-fixes-for-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
 "Fix the same error check issue in two drivers. And then the drivers
  are fixed even more because the first patches were incomplete which I
  missed.

  Summary:

   - fix the error checks of platform_get_irq() in gpio-mpc8xxx and
     gpio-idt3243x"

* tag 'gpio-fixes-for-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()
  gpio: idt3243x: Fix an ignored error return from platform_get_irq()
  gpio: idt3243x: Fix IRQ check in idt_gpio_probe
  gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe

ALSA: hda/cs8409: Add new Warlock SKUs to patch_cs8409

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220120105618.249144-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

block: Fix wrong offset in bio_truncate()

bio_truncate() clears the buffer outside of last block of bdev, however
current bio_truncate() is using the wrong offset of page. So it can
return the uninitialized data.

This happened when both of truncated/corrupted FS and userspace (via
bdev) are trying to read the last of bdev.

Reported-by: syzbot+ac94ae5f68b84197f41c@syzkaller.appspotmail.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/875yqt1c9g.fsf@mail.parknet.co.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
 "The highlight is the new mount "device" string syntax implemented by
  Venky Shankar. It solves some long-standing issues with using
  different auth entities and/or mounting different CephFS filesystems
  from the same cluster, remounting and also misleading /proc/mounts
  contents. The existing syntax of course remains to be maintained.

  On top of that, there is a couple of fixes for edge cases in quota and
  a new mount option for turning on unbuffered I/O mode globally instead
  of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"

* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
  ceph: move CEPH_SUPER_MAGIC definition to magic.h
  ceph: remove redundant Lsx caps check
  ceph: add new "nopagecache" option
  ceph: don't check for quotas on MDS stray dirs
  ceph: drop send metrics debug message
  rbd: make const pointer spaces a static const array
  ceph: Fix incorrect statfs report for small quota
  ceph: mount syntax module parameter
  doc: document new CephFS mount device syntax
  ceph: record updated mon_addr on remount
  ceph: new device mount syntax
  libceph: rename parse_fsid() to ceph_parse_fsid() and export
  libceph: generalize addr/ip parsing based on delimiter

Merge tag '5.17-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull ksmbd server fixes from Steve French:

 - authentication fix

 - RDMA (smbdirect) fixes (including fix for a memory corruption, and
   some performance improvements)

 - multiple improvements for multichannel

 - misc fixes, including crediting (flow control) improvements

 - cleanup fixes, including some kernel doc fixes

* tag '5.17-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: (23 commits)
  ksmbd: fix guest connection failure with nautilus
  ksmbd: uninitialized variable in create_socket()
  ksmbd: smbd: fix missing client's memory region invalidation
  ksmbd: add smb-direct shutdown
  ksmbd: smbd: change the default maximum read/write, receive size
  ksmbd: smbd: create MR pool
  ksmbd: add reserved room in ipc request/response
  ksmbd: smbd: call rdma_accept() under CM handler
  ksmbd: limits exceeding the maximum allowable outstanding requests
  ksmbd: move credit charge deduction under processing request
  ksmbd: add support for smb2 max credit parameter
  ksmbd: set 445 port to smbdirect port by default
  ksmbd: register ksmbd ib client with ib_register_client()
  ksmbd: Fix smb2_get_name() kernel-doc comment
  ksmbd: Delete an invalid argument description in smb2_populate_readdir_entry()
  ksmbd: Fix smb2_set_info_file() kernel-doc comment
  ksmbd: Fix buffer_check_err() kernel-doc comment
  ksmbd: fix multi session connection failure
  ksmbd: set both ipv4 and ipv6 in FSCTL_QUERY_NETWORK_INTERFACE_INFO
  ksmbd: set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
  ...

Merge tag 'vfio-v5.17-rc1' of git://github.com/awilliam/linux-vfio

Pull VFIO updates from Alex Williamson:

 - Fix sparse endian warnings in IGD code (Alex Williamson)

 - Balance kvzalloc with kvfree (Jiacheng Shi)

* tag 'vfio-v5.17-rc1' of git://github.com/awilliam/linux-vfio:
  vfio/iommu_type1: replace kfree with kvfree
  vfio/pci: Resolve sparse endian warnings in IGD support

Merge tag 'pwm/for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This contains a number of nice cleanups and improvements for the core
  and various drivers, as well as a minor tweak to the json-schema
  device tree bindings"

* tag 'pwm/for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: Avoid selecting schema on node name match
  pwm: img: Use only a single idiom to get a runtime PM reference
  pwm: vt8500: Implement .apply() callback
  pwm: img: Implement .apply() callback
  pwm: twl: Implement .apply() callback
  pwm: Restore initial state if a legacy callback fails
  pwm: Prevent a glitch for legacy drivers
  pwm: Move legacy driver handling into a dedicated function

Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, bpf.

  Quite a handful of old regression fixes but most of those are
  pre-5.16.

  Current release - regressions:

   - fix memory leaks in the skb free deferral scheme if upper layer
     protocols are used, i.e. in-kernel TCP readers like TLS

  Current release - new code bugs:

   - nf_tables: fix NULL check typo in _clone() functions

   - change the default to y for Vertexcom vendor Kconfig

   - a couple of fixes to incorrect uses of ref tracking

   - two fixes for constifying netdev->dev_addr

  Previous releases - regressions:

   - bpf:
      - various verifier fixes mainly around register offset handling
        when passed to helper functions
      - fix mount source displayed for bpffs (none -> bpffs)

   - bonding:
      - fix extraction of ports for connection hash calculation
      - fix bond_xmit_broadcast return value when some devices are down

   - phy: marvell: add Marvell specific PHY loopback

   - sch_api: don't skip qdisc attach on ingress, prevent ref leak

   - htb: restore minimal packet size handling in rate control

   - sfp: fix high power modules without diagnostic monitoring

   - mscc: ocelot:
      - don't let phylink re-enable TX PAUSE on the NPI port
      - don't dereference NULL pointers with shared tc filters

   - smsc95xx: correct reset handling for LAN9514

   - cpsw: avoid alignment faults by taking NET_IP_ALIGN into account

   - phy: micrel: use kszphy_suspend/_resume for irq aware devices,
     avoid races with the interrupt

  Previous releases - always broken:

   - xdp: check prog type before updating BPF link

   - smc: resolve various races around abnormal connection termination

   - sit: allow encapsulated IPv6 traffic to be delivered locally

   - axienet: fix init/reset handling, add missing barriers, read the
     right status words, stop queues correctly

   - add missing dev_put() in sock_timestamping_bind_phc()

  Misc:

   - ipv4: prevent accidentally passing RTO_ONLINK to
     ip_route_output_key_hash() by sanitizing flags

   - ipv4: avoid quadratic behavior in netns dismantle

   - stmmac: dwmac-oxnas: add support for OX810SE

   - fsl: xgmac_mdio: add workaround for erratum A-009885"

* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
  ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
  ipv4: avoid quadratic behavior in netns dismantle
  net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
  powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
  dt-bindings: net: Document fsl,erratum-a009885
  net/fsl: xgmac_mdio: Add workaround for erratum A-009885
  net: mscc: ocelot: fix using match before it is set
  net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
  net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
  nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
  net: axienet: increase default TX ring size to 128
  net: axienet: fix for TX busy handling
  net: axienet: fix number of TX ring slots for available check
  net: axienet: Fix TX ring slot available check
  net: axienet: limit minimum TX ring size
  net: axienet: add missing memory barriers
  net: axienet: reset core on initialization prior to MDIO access
  net: axienet: Wait for PhyRstCmplt after core reset
  net: axienet: increase reset timeout
  bpf, selftests: Add ringbuf memory type confusion test
  ...

Merge branch 'akpm' (patches from Andrew)

Merge more updates from Andrew Morton:
 "55 patches.

  Subsystems affected by this patch series: percpu, procfs, sysctl,
  misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
  hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
  lib: remove redundant assignment to variable ret
  ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
  kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
  lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
  btrfs: use generic Kconfig option for 256kB page size limit
  arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
  configs: introduce debug.config for CI-like setup
  delayacct: track delays from memory compact
  Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
  delayacct: cleanup flags in struct task_delay_info and functions use it
  delayacct: fix incomplete disable operation when switch enable to disable
  delayacct: support swapin delay accounting for swapping without blkio
  panic: remove oops_id
  panic: use error_report_end tracepoint on warnings
  fs/adfs: remove unneeded variable make code cleaner
  FAT: use io_schedule_timeout() instead of congestion_wait()
  hfsplus: use struct_group_attr() for memcpy() region
  nilfs2: remove redundant pointer sbufs
  fs/binfmt_elf: use PT_LOAD p_align values for static PIE
  const_structs.checkpatch: add frequently used ops structs
  ...

gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()

The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'irqn', so making 'irqn' an int.

Eliminate the following coccicheck warning:
./drivers/gpio/gpio-mpc8xxx.c:391:5-21: WARNING: Unsigned expression
compared with zero: mpc8xxx_gc -> irqn < 0

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 2b10b8665107 ("gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

gpio: idt3243x: Fix an ignored error return from platform_get_irq()

The return from the call to platform_get_irq() is int, it can be
a negative error code, however this is being assigned to an unsigned
int variable 'parent_irq', so making 'parent_irq' an int.

Eliminate the following coccicheck warning:
./drivers/gpio/gpio-idt3243x.c:167:6-16: WARNING: Unsigned expression
compared with zero: parent_irq < 0

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 7dcbc1e28a74 ("gpio: idt3243x: Fix IRQ check in idt_gpio_probe")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

lib: remove redundant assignment to variable ret

The variable ret is being assigned a value that is never read.  If the
for-loop is entered then ret is immediately re-assigned a new value.  If
the for-loop is not executed ret is never read.  The assignment is
redundant and can be removed.

Link: https://lkml.kernel.org/r/20211230134557.83633-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ubsan: remove CONFIG_UBSAN_OBJECT_SIZE

The object-size sanitizer is redundant to -Warray-bounds, and
inappropriately performs its checks at run-time when all information
needed for the evaluation is available at compile-time, making it quite
difficult to use:

  https://bugzilla.kernel.org/show_bug.cgi?id=214861

With -Warray-bounds almost enabled globally, it doesn't make sense to
keep this around.

Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR

Until recent versions of GCC and Clang, it was not possible to disable
KCOV instrumentation via a function attribute.  The relevant function
attribute was introduced in dd459503f218d ("kcov: add
__no_sanitize_coverage to fix noinstr for all architectures").

x86 was the first architecture to want a working noinstr, and at the
time no compiler support for the attribute existed yet.  Therefore,
commit f5270568b23ee ("objtool: Fix noinstr vs KCOV") introduced the
ability to NOP __sanitizer_cov_*() calls in .noinstr.text.

However, this doesn't work for other architectures like arm64 and s390
that want a working noinstr per ARCH_WANTS_NO_INSTR.

At the time of f5270568b23ee, we didn't yet have ARCH_WANTS_NO_INSTR,
but now we can move the Kconfig dependency checks to the generic KCOV
option.  KCOV will be available if:

- architecture does not care about noinstr, OR
- we have objtool support (like on x86), OR
- GCC is 12.0 or newer, OR
- Clang is 13.0 or newer.

Link: https://lkml.kernel.org/r/20211201152604.3984495-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB

Commit f853f1265d58 ("btrfs: disable build on platforms having page size
256K") disabled btrfs for configurations that used a 256kB page size.
However, it did not fully solve the problem because CONFIG_TEST_KMOD
selects CONFIG_BTRFS, which does not account for the dependency.  This
results in a Kconfig warning and the failed BUILD_BUG_ON error
returning.

  WARNING: unmet direct dependencies detected for BTRFS_FS
    Depends on [n]: BLOCK [=y] && !PPC_256K_PAGES && !PAGE_SIZE_256KB [=y]
    Selected by [m]:
    - TEST_KMOD [=m] && RUNTIME_TESTING_MENU [=y] && m && MODULES [=y] && NETDEVICES [=y] && NET_CORE [=y] && INET [=y] && BLOCK [=y]

To resolve this, add CONFIG_PAGE_SIZE_LESS_THAN_256KB as a dependency of
CONFIG_TEST_KMOD so there is no more invalid configuration or build
errors.

Link: https://lkml.kernel.org/r/20211129230141.228085-4-nathan@kernel.org
Fixes: f853f1265d58 ("btrfs: disable build on platforms having page size 256K")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

btrfs: use generic Kconfig option for 256kB page size limit

Use the newly introduced CONFIG_PAGE_SIZE_LESS_THAN_256KB to describe
the dependency introduced by commit f853f1265d58 ("btrfs: disable build
on platforms having page size 256K").

Link: https://lkml.kernel.org/r/20211129230141.228085-3-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB

Patch series "Fix CONFIG_TEST_KMOD with 256kB page size".

The kernel test robot reported a build error [1] from a failed assertion
in fs/btrfs/inode.c with a hexagon randconfig that includes
CONFIG_PAGE_SIZE_256KB.  This error is the same one that was addressed
by commit f853f1265d58 ("btrfs: disable build on platforms having page
size 256K") but CONFIG_TEST_KMOD selects CONFIG_BTRFS without having the
"page size less than 256kB dependency", which results in the error
reappearing.

The first patch introduces CONFIG_PAGE_SIZE_LESS_THAN_256KB by splitting
it off from CONFIG_PAGE_SIZE_LESS_THAN_64KB, which was introduced in
commit 45f6d7f18835 ("arch: Add generic Kconfig option indicating page
size smaller than 64k") for a similar reason in 5.16-rc3.

The second patch uses that configuration option for CONFIG_BTRFS to
reduce duplication.

The third patch resolves the build error by adding
CONFIG_PAGE_SIZE_LESS_THAN_256KB as a dependency to CONFIG_TEST_KMOD so
that CONFIG_BTRFS does not get enabled under that invalid configuration.

[1]: https://lore.kernel.org/r/202111270255.UYOoN5VN-lkp@intel.com/

This patch (of 3):

btrfs requires a page size smaller than 256kB.  To use that dependency
in other places, introduce CONFIG_PAGE_SIZE_LESS_THAN_256KB and reuse
that dependency in CONFIG_PAGE_SIZE_LESS_THAN_64KB.

Link: https://lkml.kernel.org/r/20211129230141.228085-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211129230141.228085-2-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

configs: introduce debug.config for CI-like setup

Some general debugging features like kmemleak, KASAN, lockdep, UBSAN etc
help fix many viruses like a microscope.  On the other hand, those
features are scatter around and mixed up with more situational debugging
options making them difficult to consume properly.  This cold help
amplify the general debugging/testing efforts and help establish
sensitive default values for those options across the broad.  This could
also help different distros to collaborate on maintaining debug-flavored
kernels.

The config is based on years' experiences running daily CI inside the
largest enterprise Linux distro company to seek regressions on
linux-next builds on different bare-metal and virtual platforms.  It can
be used for example,

  $ make ARCH=arm64 defconfig debug.config

Since KASAN and KCSAN can't be enabled together, we will need to create
a separate one for KCSAN later as well.

Link: https://lkml.kernel.org/r/20211115134754.7334-1-quic_qiancai@quicinc.com
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: "Stephen Rothwell" <sfr@canb.auug.org.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: track delays from memory compact

Delay accounting does not track the delay of memory compact.  When there
is not enough free memory, tasks can spend a amount of their time
waiting for compact.

To get the impact of tasks in direct memory compact, measure the delay
when allocating memory through memory compact.

Also update tools/accounting/getdelays.c:

    / # ./getdelays_next  -di -p 304
    print delayacct stats ON
    printing IO accounting
    PID     304

    CPU             count     real total  virtual total    delay total  delay average
                      277      780000000      849039485       18877296          0.068ms
    IO              count    delay total  delay average
                        0              0              0ms
    SWAP            count    delay total  delay average
                        0              0              0ms
    RECLAIM         count    delay total  delay average
                        5    11088812685           2217ms
    THRASHING       count    delay total  delay average
                        0              0              0ms
    COMPACT         count    delay total  delay average
                        3          72758              0ms
    watch: read=0, write=0, cancelled_write=0

Link: https://lkml.kernel.org/r/1638619795-71451-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Zhang Wenya <zhang.wenya1@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact

Add thrashing page cache and direct compact related descriptions and
update the usage of getdelays userspace utility.

The following patches modifications have been updated:
https://lore.kernel.org/all/20190312102002.31737-4-jinpuwang@gmail.com/
https://lore.kernel.org/all/1638619795-71451-1-git-send-email-
wang.yong12@zte.com.cn/

Link: https://lkml.kernel.org/r/1639583021-92977-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: cleanup flags in struct task_delay_info and functions use it

Flags in struct task_delay_info is used to distinguish the difference
between swapin and blkio delay acountings.  But after patch "delayacct:
support swapin delay accounting for swapping without blkio", there is no
need to do that since swapin and blkio delay accounting use their own
functions.

Link: https://lkml.kernel.org/r/20211124065958.36703-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: fix incomplete disable operation when switch enable to disable

When a task is created after delayacct is enabled, kernel will do all
the delay accountings for that task.  The problems is if user disables
delayacct by set /proc/sys/kernel/task_delayacct to zero, only blkio
delay accounting is disabled.

Now disable all the kinds of delay accountings when
/proc/sys/kernel/task_delayacct sets to zero.

Link: https://lkml.kernel.org/r/20211123140342.32962-1-ran.xiaokai@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

delayacct: support swapin delay accounting for swapping without blkio

Currently delayacct accounts swapin delay only for swapping that cause
blkio.  If we use zram for swapping, tools/accounting/getdelays can't
get any SWAP delay.

It's useful to get zram swapin delay information, for example to adjust
compress algorithm or /proc/sys/vm/swappiness.

Reference to PSI, it accounts any kind of swapping by doing its work in
swap_readpage(), no matter whether swapping causes blkio.  Let delayacct
do the similar work.

Link: https://lkml.kernel.org/r/20211112083813.8559-1-yang.yang29@zte.com.cn
Signed-off-by: Yang Yang <yang.yang29@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: remove oops_id

The oops id has been added as part of the end of trace marker for the
kerneloops.org project.  The id is used to automatically identify
duplicate submissions of the same report.  Identical looking reports
with different a id can be considered as the same oops occurred again.

The early initialisation of the oops_id can create a warning if the
random core is not yet fully initialized.  On PREEMPT_RT it is
problematic if the id is initialized on demand from non preemptible
context.

The kernel oops project is not available since 2017.  Remove the oops_id
and use 0 in the output in case parser rely on it.

Link: https://bugs.debian.org/953172
Link: https://lkml.kernel.org/r/Ybdi16aP2NEugWHq@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

panic: use error_report_end tracepoint on warnings

Introduce the error detector "warning" to the error_report event and use
the error_report_end tracepoint at the end of a warning report.

This allows in-kernel tests but also userspace to more easily determine
if a warning occurred without polling kernel logs.

[akpm@linux-foundation.org: add comma to enum list, per Andy]

Link: https://lkml.kernel.org/r/20211115085630.1756817-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/adfs: remove unneeded variable make code cleaner

Return value directly instead of taking this in a variable.

Link: https://lkml.kernel.org/r/20211210023211.424609-1-chi.minghao@zte.com.cn
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cm>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FAT: use io_schedule_timeout() instead of congestion_wait()

congestion_wait() in this context is just a sleep - block devices do not
support congestion signalling any more.

The goal for this wait, which was introduced in commit 684bae050ad4
("[PATCH] add -o flush for fat") is to wait for any recently written
data to get to storage.  We currently have no direct mechanism to do
this, so a simple wait that behaves identically to the current
congestion_wait() is the best we can do.

This is a step towards removing congestion_wait()

Link: https://lkml.kernel.org/r/163936544519.22433.13400436295732112065@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: use struct_group_attr() for memcpy() region

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.

Add struct_group() to mark the "info" region (containing struct DInfo
and struct DXInfo structs) in struct hfsplus_cat_folder and struct
hfsplus_cat_file that are written into directly, so the compiler can
correctly reason about the expected size of the writes.

"pahole" shows no size nor member offset changes to struct
hfsplus_cat_folder nor struct hfsplus_cat_file.  "objdump -d" shows no
object code changes.

Link: https://lkml.kernel.org/r/20211119192851.1046717-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nilfs2: remove redundant pointer sbufs

Pointer sbufs is being assigned a value but it's not being used later
on.  The pointer is redundant and can be removed.  Cleans up scan-build
static analysis warning:

  fs/nilfs2/page.c:203:8: warning: Although the value stored to 'sbufs'
    is used in the enclosing expression, the value is never actually read
    from 'sbufs' [deadcode.DeadStores]
        sbh = sbufs = page_buffers(src);

Link: https://lkml.kernel.org/r/20211211180955.550380-1-colin.i.king@gmail.com
Link: https://lkml.kernel.org/r/1640712476-15136-1-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/binfmt_elf: use PT_LOAD p_align values for static PIE

Extend commit ce06ebaa015d ("fs/binfmt_elf: use PT_LOAD p_align values
for suitable start address") which fixed PIE binaries built with
-Wl,-z,max-page-size=0x200000, to cover static PIE binaries.  This
fixes:

    https://bugzilla.kernel.org/show_bug.cgi?id=215275

Tested by verifying static PIE binaries with -Wl,-z,max-page-size=0x200000 loading.

Link: https://lkml.kernel.org/r/20211209174052.370537-1-hjl.tools@gmail.com
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

const_structs.checkpatch: add frequently used ops structs

Add commonly used structs (>50 instances) which are always or almost
always const.

Link: https://lkml.kernel.org/r/20211127101134.33101-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: improve Kconfig help test

The Kconfig help test erroneously counts patch context lines as part of
the help text.

Fix that and improve the message block output.

Link: https://lkml.kernel.org/r/06c0cdc157ae1502e8e9eb3624b9ea995cf11e7a.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

checkpatch: relax regexp for COMMIT_LOG_LONG_LINE

One exceptions to the COMMIT_LOG_LONG_LINE rule is a file path followed
by ':'.  That is typically some sort diagnostic message from a compiler
or a build tool, in which case we don't want to wrap the lines but keep
the message unmodified.

The regular expression used to match this pattern currently doesn't
accept absolute paths or + characters.  This can result in false
positives as in the following (out-of-tree) example:

  ...
  /home/jerome/work/optee_repo_qemu/build/../toolchains/aarch32/bin/arm-linux-gnueabihf-ld.bfd: /home/jerome/work/toolchains-gcc10.2/aarch32/bin/../lib/gcc/arm-none-linux-gnueabihf/10.2.1/../../../../arm-none-linux-gnueabihf/lib/libstdc++.a(eh_alloc.o): in function `__cxa_allocate_exception':
  /tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/src/gcc/libstdc++-v3/libsupc++/eh_alloc.cc:284: undefined reference to `malloc'
  ...

Update the regular expression to match the above paths.

Link: https://lkml.kernel.org/r/20210923143842.2837983-1-jerome@forissier.org
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_meminit: destroy cache in kmem_cache_alloc_bulk() test

Make do_kmem_cache_size_bulk() destroy the cache it creates.

Link: https://lkml.kernel.org/r/aced20a94bf04159a139f0846e41d38a1537debb.1640018297.git.andreyknvl@google.com
Fixes: 5310ed70063a ("lib/test_meminit: add a kmem_cache_alloc_bulk() test")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uuid: remove licence boilerplate text from the header

Remove licence boilerplate text from the UAPI header.

Link: https://lkml.kernel.org/r/20211216113552.81199-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uuid: discourage people from using UAPI header in new code

Discourage people from using UAPI header in new code by adding a note.

Link: https://lkml.kernel.org/r/20211216113552.81199-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kunit: replace kernel.h with the necessary inclusions

When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.

Replace kernel.h inclusion with the list of what is really being used.

Link: https://lkml.kernel.org/r/20211213204441.56204-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test_hash.c: refactor into kunit

Use KUnit framework to make tests more easily integrable with CIs.  Even
though these tests are not yet properly written as unit tests this
change should help in debugging.

Also remove kernel messages (i.e.  through pr_info) as KUnit handles all
debugging output and let it handle module init and exit details.

Link: https://lkml.kernel.org/r/20211208183711.390454-6-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: David Gow <davidgow@google.com>
Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/Kconfig.debug: properly split hash test kernel entries

Split TEST_HASH so that each entry only has one file.

Note that there's no stringhash test file, but actually
<linux/stringhash.h> tests are performed in lib/test_hash.c.

Link: https://lkml.kernel.org/r/20211208183711.390454-5-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Enzo Ferreira <ferreiraenzoa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test_hash.c: split test_hash_init

Split up test_hash_init so that it calls each test more explicitly
insofar it is possible without rewriting the entire file.  This aims at
improving readability.

Split tests performed on string_or as they don't interfere with those
performed in hash_or.  Also separate pr_info calls about skipped tests
as they're not part of the tests themselves, but only warn about
(un)defined arch-specific hash functions.

Link: https://lkml.kernel.org/r/20211208183711.390454-4-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Enzo Ferreira <ferreiraenzoa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

test_hash.c: split test_int_hash into arch-specific functions

Split the test_int_hash function to keep its mainloop separate from
arch-specific chunks, which are only compiled as needed.  This aims at
improving readability.

Link: https://lkml.kernel.org/r/20211208183711.390454-3-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Enzo Ferreira <ferreiraenzoa@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: kernel test robot <lkp@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hash.h: remove unused define directive

Patch series "test_hash.c: refactor into KUnit", v3.

We refactored the lib/test_hash.c file into KUnit as part of the student
group LKCAMP [1] introductory hackathon for kernel development.

This test was pointed to our group by Daniel Latypov [2], so its full
conversion into a pure KUnit test was our goal in this patch series, but
we ran into many problems relating to it not being split as unit tests,
which complicated matters a bit, as the reasoning behind the original
tests is quite cryptic for those unfamiliar with hash implementations.

Some interesting developments we'd like to highlight are:

 - In patch 1/5 we noticed that there was an unused define directive
   that could be removed.

 - In patch 4/5 we noticed how stringhash and hash tests are all under
   the lib/test_hash.c file, which might cause some confusion, and we
   also broke those kernel config entries up.

Overall KUnit developments have been made in the other patches in this
series:

In patches 2/5, 3/5 and 5/5 we refactored the lib/test_hash.c file so as
to make it more compatible with the KUnit style, whilst preserving the
original idea of the maintainer who designed it (i.e.  George Spelvin),
which might be undesirable for unit tests, but we assume it is enough
for a first patch.

This patch (of 5):

Currently, there exist hash_32() and __hash_32() functions, which were
introduced in a patch [1] targeting architecture specific optimizations.
These functions can be overridden on a per-architecture basis to achieve
such optimizations.  They must set their corresponding define directive
(HAVE_ARCH_HASH_32 and HAVE_ARCH__HASH_32, respectively) so that header
files can deal with these overrides properly.

As the supported 32-bit architectures that have their own hash function
implementation (i.e.  m68k, Microblaze, H8/300, pa-risc) have only been
making use of the (more general) __hash_32() function (which only lacks
a right shift operation when compared to the hash_32() function), remove
the define directive corresponding to the arch-specific hash_32()
implementation.

[1] https://lore.kernel.org/lkml/20160525073311.5600.qmail@ns.sciencehorizons.net/

[akpm@linux-foundation.org: hash_32_generic() becomes hash_32()]

Link: https://lkml.kernel.org/r/20211208183711.390454-1-isabbasso@riseup.net
Link: https://lkml.kernel.org/r/20211208183711.390454-2-isabbasso@riseup.net
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: David Gow <davidgow@google.com>
Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com>
Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com>
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/list_debug.c: print more list debugging context in __list_del_entry_valid()

Currently, the entry->prev and entry->next are considered to be valid as
long as they are not LIST_POISON{1|2}.  However, the memory may be
corrupted.  The prev->next is invalid probably because 'prev' is
invalid, not because prev->next's content is illegal.

Unfortunately, the printk and its subfunctions will modify the registers
that hold the 'prev' and 'next', and we don't see this valuable
information in the BUG context.

So print the contents of 'entry->prev' and 'entry->next'.

Here's an example:
  list_del corruption. prev->next should be c0ecbf74, but was c08410dc
  kernel BUG at lib/list_debug.c:53!
  ... ...
  PC is at __list_del_entry_valid+0x58/0x98
  LR is at __list_del_entry_valid+0x58/0x98
  psr: 60000093
  sp : c0ecbf30  ip : 00000000  fp : 00000001
  r10: c08410d0  r9 : 00000001  r8 : c0825e0c
  r7 : 20000013  r6 : c08410d0  r5 : c0ecbf74  r4 : c0ecbf74
  r3 : c0825d08  r2 : 00000000  r1 : df7ce6f4  r0 : 00000044
  ... ...
  Stack: (0xc0ecbf30 to 0xc0ecc000)
  bf20:                                     c0ecbf74 c0164fd0 c0ecbf70 c0165170
  bf40: c0eca000 c0840c00 c0840c00 c0824500 c0825e0c c0189bbc c088f404 60000013
  bf60: 60000013 c0e85100 000004ec 00000000 c0ebcdc0 c0ecbf74 c0ecbf74 c0825d08
  bf80: c0e807c0 c018965c 00000000 c013f2a0 c0e807c0 c013f154 00000000 00000000
  bfa0: 00000000 00000000 00000000 c01001b0 00000000 00000000 00000000 00000000
  bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
  (__list_del_entry_valid) from (__list_del_entry+0xc/0x20)
  (__list_del_entry) from (finish_swait+0x60/0x7c)
  (finish_swait) from (rcu_gp_kthread+0x560/0xa20)
  (rcu_gp_kthread) from (kthread+0x14c/0x15c)
  (kthread) from (ret_from_fork+0x14/0x24)

At first, I thought prev->next was overwritten.  Later, I carefully
analyzed the RCU code and the disassembly code.  The error occurred when
deleting a node from the list rcu_state.gp_wq.  The System.map shows
that the address of rcu_state is c0840c00.  Then I use gdb to obtain the
offset of rcu_state.gp_wq.task_list.

  (gdb) p &((struct rcu_state *)0)->gp_wq.task_list
  $1 = (struct list_head *) 0x4dc

Again:
  list_del corruption. prev->next should be c0ecbf74, but was c08410dc

  c08410dc = c0840c00 + 0x4dc = &rcu_state.gp_wq.task_list

Because rcu_state.gp_wq has at most one node, so I can guess that "prev
= &rcu_state.gp_wq.task_list".  But for other scenes, maybe I wasn't so
lucky, I cannot figure out the value of 'prev'.

Link: https://lkml.kernel.org/r/20211207025835.1909-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

list: introduce list_is_head() helper and re-use it in list.h

Introduce list_is_head() in the similar (*) way as it's done for
list_entry_is_head().  Make use of it in the list.h.

*) it's done as inliner and not a macro to be aligned with other
   list_is_*() APIs; while at it, make all three to have the same
   style.

Link: https://lkml.kernel.org/r/20211201141824.81400-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kstrtox: uninline everything

I've made a mistake of looking into lib/kstrtox.o code generation.

The only function remotely performance critical is _parse_integer()
(via /proc/*/map_files/*), everything else is not.

Uninline everything, shrink lib/kstrtox.o by ~20 % !

Space savings on x86_64:

add/remove: 0/0 grow/shrink: 0/23 up/down: 0/-1269 (-1269 !!!)
Function                                     old     new   delta
kstrtoull                                     16      13      -3
kstrtouint                                    59      48     -11
kstrtou8                                      60      49     -11
kstrtou16                                     61      50     -11
_kstrtoul                                     46      35     -11
kstrtoull_from_user                           95      83     -12
kstrtoul_from_user                            95      83     -12
kstrtoll                                      93      80     -13
kstrtouint_from_user                         124      83     -41
kstrtou8_from_user                           125      83     -42
kstrtou16_from_user                          126      83     -43
kstrtos8                                     101      50     -51
kstrtos16                                    102      51     -51
kstrtoint                                    100      49     -51
_kstrtol                                      93      35     -58
kstrtobool_from_user                         156      75     -81
kstrtoll_from_user                           165      83     -82
kstrtol_from_user                            165      83     -82
kstrtoint_from_user                          172      83     -89
kstrtos8_from_user                           173      83     -90
kstrtos16_from_user                          174      83     -91
_parse_integer                               136      10    -126
_kstrtoull                                   308     101    -207
Total: Before=3421236, After=3419967, chg -0.04%

Link: https://lkml.kernel.org/r/YZDsFDhHst4m2Pnt@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_maintainer: don't remind about no git repo when --nogit is used

When --nogit is used with scripts/get_maintainer.pl, the script spews 4
lines of unnecessary information (noise).  Do not print those lines when
--nogit is specified.

This change removes the printing of these 4 lines:

  ./scripts/get_maintainer.pl: No supported VCS found.  Add --nogit to options?
  Using a git repository produces better results.
  Try Linus Torvalds' latest git repository using:
  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git

Link: https://lkml.kernel.org/r/20220102031424.3328-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kernel/sys.c: only take tasklist_lock for get/setpriority(PRIO_PGRP)

PRIO_PGRP needs the tasklist_lock mainly to serialize vs setpgid(2), to
protect against any concurrent change_pid(PIDTYPE_PGID) that can move
the task from one hlist to another while iterating.

However, the remaining can only rely only on RCU:

PRIO_PROCESS only does the task lookup and never iterates over tasklist
and we already have an rcu-aware stable pointer.

PRIO_USER is already racy vs setuid(2) so with creds being rcu
protected, we can end up seeing stale data.  When removing the
tasklist_lock there can be a race with (i) fork but this is benign as
the child's nice is inherited and the new task is not observable by the
user yet either, hence the return semantics do not differ.  And (ii) a
race with exit, which is a small window and can cause us to miss a task
which was removed from the list and it had the highest nice.

Similarly change the buggy do_each_thread/while_each_thread combo in
PRIO_USER for the rcu-safe for_each_process_thread flavor, which doesn't
make use of next_thread/p->thread_group.

[akpm@linux-foundation.org: coding style fixes]

Link: https://lkml.kernel.org/r/20211210182250.43734-1-dave@stgolabs.net
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kthread: dynamically allocate memory to store kthread's full name

When I was implementing a new per-cpu kthread cfs_migration, I found the
comm of it "cfs_migration/%u" is truncated due to the limitation of
TASK_COMM_LEN.  For example, the comm of the percpu thread on CPU10~19
all have the same name "cfs_migration/1", which will confuse the user.
This issue is not critical, because we can get the corresponding CPU
from the task's Cpus_allowed.  But for kthreads corresponding to other
hardware devices, it is not easy to get the detailed device info from
task comm, for example,

    jbd2/nvme0n1p2-
    xfs-reclaim/sdf

Currently there are so many truncated kthreads:

    rcu_tasks_kthre
    rcu_tasks_rude_
    rcu_tasks_trace
    poll_mpt3sas0_s
    ext4-rsv-conver
    xfs-reclaim/sd{a, b, c, ...}
    xfs-blockgc/sd{a, b, c, ...}
    xfs-inodegc/sd{a, b, c, ...}
    audit_send_repl
    ecryptfs-kthrea
    vfio-irqfd-clea
    jbd2/nvme0n1p2-
    ...

We can shorten these names to work around this problem, but it may be
not applied to all of the truncated kthreads.  Take 'jbd2/nvme0n1p2-'
for example, it is a nice name, and it is not a good idea to shorten it.

One possible way to fix this issue is extending the task comm size, but
as task->comm is used in lots of places, that may cause some potential
buffer overflows.  Another more conservative approach is introducing a
new pointer to store kthread's full name if it is truncated, which won't
introduce too much overhead as it is in the non-critical path.  Finally
we make a dicision to use the second approach.  See also the discussions
in this thread:
https://lore.kernel.org/lkml/20211101060419.4682-1-laoar.shao@gmail.com/

After this change, the full name of these truncated kthreads will be
displayed via /proc/[pid]/comm:

    rcu_tasks_kthread
    rcu_tasks_rude_kthread
    rcu_tasks_trace_kthread
    poll_mpt3sas0_statu
    ext4-rsv-conversion
    xfs-reclaim/sdf1
    xfs-blockgc/sdf1
    xfs-inodegc/sdf1
    audit_send_reply
    ecryptfs-kthread
    vfio-irqfd-cleanup
    jbd2/nvme0n1p2-8

Link: https://lkml.kernel.org/r/20211120112850.46047-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN

As the sched:sched_switch tracepoint args are derived from the kernel,
we'd better make it same with the kernel.  So the macro TASK_COMM_LEN is
converted to type enum, then all the BPF programs can get it through
BTF.

The BPF program which wants to use TASK_COMM_LEN should include the
header vmlinux.h.  Regarding the test_stacktrace_map and
test_tracepoint, as the type defined in linux/bpf.h are also defined in
vmlinux.h, so we don't need to include linux/bpf.h again.

Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/bpf/bpftool/skeleton: replace bpf_probe_read_kernel with bpf_probe_read_kernel_str to get task comm

bpf_probe_read_kernel_str() will add a nul terminator to the dst, then
we don't care about if the dst size is big enough.

Link: https://lkml.kernel.org/r/20211120112738.45980-7-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>