Once a kobject is initialized, the containing object should not be
directly freed. So delay initialization until it is added. Also
remove the kobject_del call as the last put will remove the kobject as
well. The explicitly delete isn't needed here, and dropping it will
simplify further fixes.
With this md_free now does not need to check that ->gendisk is non-NULL
as it is always set by the time that kobject_init is called on
mddev->kobj.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
md/raid5: Convert prepare_to_wait() to wait_woken() api
raid5_get_active_stripe() can sleep in various situations and it
is called by make_stripe_request() while inside the
prepare_to_wait()/finish_wait() section. Nested waits like this are
not supported.
This was noticed while making other changes that add different sleeps
to raid5_get_active_stripe() that caused a WARNING with
CONFIG_DEBUG_ATOMIC_SLEEP.
No ill effects have been noticed with the code as is, but theoretically
a nested and here could cause a dead lock so it should be fixed.
To fix this, convert the prepare_to_wait() call to use wake_woken()
which supports nested sleeps.
Link: https://lwn.net/Articles/628628/ Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
md/raid5: Fix sectors_to_do bitmap overflow in raid5_make_request()
For unaligned IO that have nearly maximum sectors, the number of stripes
will end up being one greater than the size of the bitmap. When this
happens, the last stripe in the IO will not be processed as it should
be, resulting in data corruption.
However, this is not normally seen when the backing block devices have
4K physical block sizes since the block layer will split the request
before that happens.
To fix this increase the bitmap size by one bit and ensure the full
number of stripes are checked when calling find_first_bit().
Reported-by: David Sloan <David.Sloan@eideticom.com> Fixes: 53843dc9902f ("md/raid5: Pivot raid5_make_request()") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Coly Li [Tue, 19 Jul 2022 04:27:24 +0000 (12:27 +0800)]
bcache: remove EXPERIMENTAL for Kconfig option 'Asynchronous device registration'
The "Asynchronous device registration (EXPERIMENTAL)" Kconfig option is
for 2+ years, it is used when registration takes too much time for
massive amount of cached data, to avoid udev task timeout during boot
time.
Many users and products enable this Kconfig option for quite long time
(e.g. SUSE Linux) and it works as expected and no issue reported.
It is time to remove the "EXPERIMENTAL" tag from this Kconfig item.
commit 78bd39615e0b ("nbd: use pr_err to output error message") tries
to define pr_fmt and use short pr_err() to output error message,
however, the definition is missed.
This patch also remove existing "nbd:" inside pr_err().
Dan Carpenter [Fri, 15 Jul 2022 08:12:14 +0000 (11:12 +0300)]
null_blk: fix ida error handling in null_add_dev()
There needs to be some error checking if ida_simple_get() fails.
Also call ida_free() if there are errors later.
Fixes: 211c7e757b27 ("nullb: use ida to manage index") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YtEhXsr6vJeoiYhd@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
Guixin Liu [Fri, 8 Jul 2022 03:06:05 +0000 (11:06 +0800)]
nvme-apple: use nvme core helper to cancel requests in tagset
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset
instead of same logic code.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Ruozhu Li <liruozhu@huawei.com> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, command data is only sent in-capsule on the for admin or I/O
commands on queues that indicate support for it. Send fabrics command
data in-capsule for I/O queues as well to avoid needing a separate
H2CData PDU for the connect command.
This is optimization. Without this change, we send the connect command
capsule and data in separate PDUs (CapsuleCmd and H2CData), and must wait
for the controller to respond with an R2T PDU before sending the H2CData.
With the change, we send a single CapsuleCmd PDU that includes the data.
This reduces the number of bytes (and likely packets) sent across the network,
and simplifies the send state machine handling in the driver.
Israel Rukshin [Sun, 15 May 2022 15:04:40 +0000 (18:04 +0300)]
nvme-rdma: remove timeout for getting RDMA-CM established event
In case many controllers start error recovery at the same time (i.e.,
when port is down and up), they may never succeed to reconnect again.
This is because the target can't handle all the connect requests at
three seconds (the arbitrary value set today). Even if some of the
connections are established, when a single queue fails to connect,
all the controller's queues are destroyed as well. So, on the
following reconnection attempts the number of connect requests may
remain the same. To fix this, remove the timeout and wait for RDMA-CM
event to abort/complete the connect request. RDMA-CM sends unreachable
event when a timeout of ~90 seconds is expired. This approach is used
at other RDMA-CM users like SRP and iSER at blocking mode. The commit
also renames NVME_RDMA_CONNECT_TIMEOUT_MS to NVME_RDMA_CM_TIMEOUT_MS.
Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/rnbd-srv: Replace sess_dev_list with index_idr
The structure rnbd_srv_session maintains a list and an xarray of
rnbd_srv_dev. There is no need to keep both as one of them can serve the
purpose.
Since one of the places where the lookup of rnbd_srv_dev using
rnbd_srv_session is IO path, an xarray would serve us better than a list
traversal. Hence remove sess_dev_list from rnbd_srv_session, and replace
its uses from xarray.
block/rnbd-srv: Set keep_id to true after mutex_trylock
After setting keep_id if the mutex trylock fails, the keep_id stays set
for the rest of the sess_dev lifetime.
Therefore, set keep_id to true after mutex_trylock succeeds, so that a
failure of trylock does'nt touch keep_id.
Fixes: ba30fa27397a ("block/rnbd-srv: Prevent a deadlock generated by accessing sysfs in parallel") Cc: gi-oh.kim@ionos.com Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Link: https://lore.kernel.org/r/20220707143122.460362-2-haris.iqbal@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hannes Reinecke [Mon, 27 Jun 2022 09:52:07 +0000 (11:52 +0200)]
nvmet-auth: expire authentication sessions
Each authentication step is required to be completed within the
KATO interval (or two minutes if not set). So add a workqueue function
to reset the transaction ID and the expected next protocol step;
this will automatically the next authentication command referring
to the terminated authentication.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hannes Reinecke [Mon, 27 Jun 2022 09:52:06 +0000 (11:52 +0200)]
nvmet-auth: Diffie-Hellman key exchange support
Implement Diffie-Hellman key exchange using FFDHE groups for NVMe
In-Band Authentication.
This patch adds a new host configfs attribute 'dhchap_dhgroup' to
select the FFDHE group to use.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hannes Reinecke [Mon, 27 Jun 2022 09:52:05 +0000 (11:52 +0200)]
nvmet: implement basic In-Band Authentication
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds three additional configfs entries 'dhchap_key',
'dhchap_ctrl_key', and 'dhchap_hash' to the 'host' configfs directory.
The 'dhchap_key' and 'dhchap_ctrl_key' entries need to be in the ASCII
format as specified in NVMe Base Specification v2.0 section 8.13.5.8
'Secret representation'.
'dhchap_hash' defaults to 'hmac(sha256)', and can be written to to
switch to a different HMAC algorithm.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hannes Reinecke [Mon, 27 Jun 2022 09:52:04 +0000 (11:52 +0200)]
nvmet: parse fabrics commands on io queues
Some fabrics commands can be sent via io queues, so add a new
function nvmet_parse_fabrics_io_cmd() and rename the existing
nvmet_parse_fabrics_cmd() to nvmet_parse_fabrics_admin_cmd().
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Hannes Reinecke [Mon, 27 Jun 2022 09:52:02 +0000 (11:52 +0200)]
nvme: implement In-Band authentication
Implement NVMe-oF In-Band authentication according to NVMe TPAR 8006.
This patch adds two new fabric options 'dhchap_secret' to specify the
pre-shared key (in ASCII respresentation according to NVMe 2.0 section
8.13.5.8 'Secret representation') and 'dhchap_ctrl_secret' to specify
the pre-shared controller key for bi-directional authentication of both
the host and the controller.
Re-authentication can be triggered by writing the PSK into the new
controller sysfs attribute 'dhchap_secret' or 'dhchap_ctrl_secret'.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in clang build fix] Signed-off-by: Jens Axboe <axboe@kernel.dk>
When qid value of the function parameter __nvme_submit_sync_cmd() is > 0
from above callers, we use blk_mq_alloc_request_hctx(), where we pass
last parameter as 0 if qid functional parameter value is set to 0 with
conditional operators, see 1002 :-
But qid function parameter value of the __nvme_submit_sync_cmd() will
never be 0 from above caller list see [1], and all the other callers of
__nvme_submit_sync_cmd() use NVME_QID_ANY as qid value :-
1. nvme_submit_sync_cmd()
2. nvme_features()
3. nvme_sec_submit()
4. nvmf_reg_read32()
5. nvmf_reg_read64()
6. nvmf_ref_write32()
7. nvmf_connect_admin_queue()
Remove the conditional operator to pass the qid as 0 in the call to
blk_mq_alloc_requst_hctx().
Michael Kelley [Wed, 8 Jun 2022 18:52:21 +0000 (11:52 -0700)]
nvme: handle the persistent internal error AER
In the NVM Express Revision 1.4 spec, Figure 145 describes possible
values for an AER with event type "Error" (value 000b). For a
Persistent Internal Error (value 03h), the host should perform a
controller reset.
Add support for this error using code that already exists for
doing a controller reset. As part of this support, introduce
two utility functions for parsing the AER type and subtype.
This new support was tested in a lab environment where we can
generate the persistent internal error on demand, and observe
both the Linux side and NVMe controller side to see that the
controller reset has been done.
Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, process_msg_open_rsp checks if capacity changed or not before
call rnbd_clt_change_capacity while the checking also make sense for
rnbd_clt_resize_dev_store, let's move the checking into the function.
Previously, both map and remap trigger rnbd_clt_set_dev_attr to set
some members in rnbd_clt_dev such as wc, fua and logical_block_size
etc, but those members are only useful for map scenario given the
setup_request_queue is only called from the path:
rnbd_clt_map_device -> rnbd_client_setup_device
Since rnbd_clt_map_device frees rsp after rnbd_client_setup_device,
we can pass rsp to rnbd_client_setup_device and it's callees, which
means queue's attributes can be set directly from relevant members
of rsp instead from rnbd_clt_dev.
After that, we can kill 11 members from rnbd_clt_dev, and we don't
need rnbd_clt_set_dev_attr either.
rnbd-clt: don't free rsp in msg_open_conf for map scenario
For map scenario, rsp is freed in two places:
1. msg_open_conf frees rsp if rtrs_clt_request returns 0.
2. Otherwise, rsp is freed by the call sites of rtrs_clt_request.
Now, We'd like to control full lifecycle of rsp in rnbd_clt_map_device,
with that, it is feasible to pass rsp to rnbd_client_setup_device in
next commit.
For 1, it is possible to free rsp from the caller of send_usr_msg
because of the synchronization of iu->comp.wait. And we put iu later
in rnbd_clt_map_device to ensure order of release rsp and iu.
rnbd-clt: open code send_msg_open in rnbd_clt_map_device
Let's open code it in rnbd_clt_map_device, then we can use information
from rsp to setup gendisk and request_queue in next commits. After that,
we can remove some members (wc, fua and max_hw_sectors etc) from struct
rnbd_clt_dev.
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:45 +0000 (13:19 -0600)]
md/raid5: Increase restriction on max segments per request
The block layer defaults the maximum segments to 128, which means
requests tend to get split around the 512KB depending on how many
pages can be merged. There's no such restriction in the raid5 code
so increase the limit to USHRT_MAX so that larger requests can be
sent as one.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:43 +0000 (13:19 -0600)]
md/raid5: Pivot raid5_make_request()
raid5_make_request() loops through every page in the request,
finds the appropriate stripe and adds the bio for that page in the
disk.
This causes a great deal of contention on the hash_lock and extra
work seeing each stripe must be found once for every data disk.
The number of times a stripe must be found can be reduced by pivoting
raid5_make_request() so that it loops through every stripe and then
loops through every disk in that stripe to see if the bio must be
added. This reduces the number of times the hash lock must be taken
by a factor equal to the number of data disks.
To accomplish this, the logical sectors that have already been added
must be tracked. Tracking them is done with a bitmap: the bits
for all pages are set at the start of the request and each bit
is cleared once the bio is added to a stripe.
Finding the next sector to be done is then just a call to
find_first_bit() so that sectors that have been done can simply be
skipped.
One minor downside is that the maximum sectors for a request must be
limited so that the bitmap can be appropriately sized on the stack.
This limit is arbitrarily chosen to be 256 stripe pages which works out
to 1MB if PAGE_SIZE == DEFAULT_STRIPE_SIZE. This doesn't actually
restrict the maximum request further seeing the default block queue
settings are used which restricts the number of segments to 128 (which
results in request sizes that are approximately 512KB).
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:42 +0000 (13:19 -0600)]
md/raid5: Check all disks in a stripe_head for reshape progress
When testing if a previous stripe has had reshape expand past it, use
the earliest or latest logical sector in all the disks for that stripe
head. This will allow adding multiple disks at a time in a subesquent
patch.
To do this cleaner, refactor the check into a helper function called
stripe_ahead_of_reshape().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:41 +0000 (13:19 -0600)]
md/raid5: Refactor add_stripe_bio()
Factor out two helper functions from add_stripe_bio(): one to check for
overlap (stripe_bio_overlaps()), and one to actually add the bio to the
stripe (__add_stripe_bio()). The latter function will always succeed.
This will be useful in the next patch so that overlap can be checked for
multiple disks before adding any
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:40 +0000 (13:19 -0600)]
md/raid5: Keep a reference to last stripe_head for batch
When batching, every stripe head has to find the previous stripe head to
add to the batch list. This involves taking the hash lock which is
highly contended during IO.
Instead of finding the previous stripe_head each time, store a
reference to the previous stripe_head in a pointer so that it doesn't
require taking the contended lock another time.
The reference to the previous stripe must be released before scheduling
and waiting for work to get done. Otherwise, it can hold up
raid5_activate_delayed() and deadlock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:37 +0000 (13:19 -0600)]
md/raid5: Drop the do_prepare flag in raid5_make_request()
prepare_to_wait() can be reasonably called after schedule instead of
setting a flag and preparing in the next loop iteration.
This means that prepare_to_wait() will be called before
read_seqcount_begin(), but there shouldn't be any reason that the order
matters here. On the first iteration of the loop prepare_to_wait() is
already called first.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:36 +0000 (13:19 -0600)]
md/raid5: Factor out helper from raid5_make_request() loop
Factor out the inner loop of raid5_make_request() into it's own helper
called make_stripe_request().
The helper returns a number of statuses: SUCCESS, RETRY,
SCHEDULE_AND_RETRY and FAIL. This makes the code a bit easier to
understand and allows the SCHEDULE_AND_RETRY path to be made common.
A context structure is added to contain do_flush. It will be used
more in subsequent patches for state that needs to be kept
outside the loop.
No functional changes intended. This will be cleaned up further in
subsequent patches to untangle the gen_lock and do_prepare logic
further.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:34 +0000 (13:19 -0600)]
md/raid5: Move stripe_add_to_batch_list() call out of add_stripe_bio()
stripe_add_to_batch_list() is better done in the loop in make_request
instead of inside add_stripe_bio(). This is clearer and allows for
storing the batch_head state outside the loop in a subsequent patch.
The call to add_stripe_bio() in retry_aligned_read() is for read
and batching only applies to write. So it's impossible for batching
to happen at that call site.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:32 +0000 (13:19 -0600)]
md/raid5: Factor out ahead_of_reshape() function
There are a few uses of an ugly ternary operator in raid5_make_request()
to check if a sector is a head of a reshape sector.
Factor this out into a simple helper called ahead_of_reshape().
No functional changes intended.
Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Thu, 16 Jun 2022 19:19:31 +0000 (13:19 -0600)]
md/raid5: Make logic blocking check consistent with logic that blocks
The check in raid5_make_request differs very slightly from the logic
that causes it to block lower down. This likely does not cause a bug
as the check is fuzzy anyway (as reshape may move on between the first
check and the subsequent check). However, make it consistent so it can
be cleaned up in a subsequent patch.
Guoqing Jiang [Tue, 21 Jun 2022 03:11:29 +0000 (11:11 +0800)]
md: unlock mddev before reap sync_thread in action_store
Since the bug which commit d0d1827b64334 ("md: don't unregister sync_thread
with reconfig_mutex held") fixed is related with action_store path, other
callers which reap sync_thread didn't need to be changed.
Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous
bug with belows.
1. unlock mddev before md_reap_sync_thread in action_store.
2. save reshape_position before unlock, then restore it to ensure position
not changed accidentally by others.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Boot-time assembly of arrays with md= command-line arguments breaks when
CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c
calls blkdev_get_by_dev(), assuming this implicitly creates the block
device.
Fix this by attempting to md_alloc() the array first. As in the probe path,
ignore any error as failure is caught by blkdev_get_by_dev() anyway.
Signed-off-by: Chris Webb <chris@arachsys.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 8 Jun 2022 16:27:56 +0000 (10:27 -0600)]
md: Notify sysfs sync_completed in md_reap_sync_thread()
The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)
When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".
To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 8 Jun 2022 16:27:55 +0000 (10:27 -0600)]
md: Ensure resync is reported after it starts
The 07layouts test in mdadm fails on some systems. The failure
presents itself as the backup file not being removed before the next
layout is grown into:
This is because the background mdadm process, which is responsible for
cleaning up this backup file gets into an infinite loop waiting for
the reshape to start. mdadm checks the mdstat file if a reshape is
going and, if it is not, it waits for an event on the file or times
out in 5 seconds. On faster machines, the reshape may complete before
the 5 seconds times out, and thus the background mdadm process loops
waiting for a reshape to start that has already occurred.
mdadm reads the mdstat file to start, but mdstat does not report that the
reshape has begun, even though it has indeed begun. So the mdstat_wait()
call (in mdadm) which polls on the mdstat file won't ever return until
timing out.
The reason mdstat reports the reshape has started is due to an issue
in status_resync(). recovery_active is subtracted from curr_resync which
will result in a value of zero for the first chunk of reshaped data, and
the resulting read will report no reshape in progress.
To fix this, if "resync - recovery_active" is an overloaded value, force
the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 8 Jun 2022 16:27:54 +0000 (10:27 -0600)]
md: Use enum for overloaded magic numbers used by mddev->curr_resync
Comments in the code document special values used for
mddev->curr_resync. Make this clearer by using an enum to label these
values.
The only functional change is a couple places use the wrong comparison
operator that implied 3 is another special value. They are all
fixed to imply that 3 or greater is an active resync.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 8 Jun 2022 16:27:53 +0000 (10:27 -0600)]
md/raid5-cache: Annotate pslot with __rcu notation
radix_tree_lookup_slot() and radix_tree_replace_slot() API expect the
slot returned and looked up to be marked with __rcu. Otherwise
sparse warnings are generated:
drivers/md/raid5-cache.c:2939:23: warning: incorrect type in
assignment (different address spaces)
drivers/md/raid5-cache.c:2939:23: expected void **pslot
drivers/md/raid5-cache.c:2939:23: got void [noderef] __rcu **
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 8 Jun 2022 16:27:51 +0000 (10:27 -0600)]
md/raid5-cache: Drop RCU usage of conf->log
The only place that uses RCU to access conf->log is in
r5l_log_disk_error(). This function is mostly used in the IO path
and once with mddev_lock() held in raid5_change_consistency_policy().
It is known that the IO will be suspended before the log is freed and
r5l_log_exit() is called with the mddev_lock() held.
This should mean that conf->log can not be freed while the function is
being called, so the RCU protection is not necessary. Drop the
rcu_read_lock() as well as the synchronize_rcu() and
rcu_assign_pointer() usage.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 8 Jun 2022 16:27:49 +0000 (10:27 -0600)]
md/raid5: suspend the array for calls to log_exit()
The raid5-cache code relies on there being no IO in flight when
log_exit() is called. There are two places where this is not
guaranteed so add mddev_suspend() and mddev_resume() calls to these
sites.
The site in raid5_change_consistency_policy() is in the error path,
and another similar call site already has suspend/resume calls just
below it; so it should be equally safe to make that change here.
There is one remaining site in raid5_remove_disk() that we call log_exit()
without suspending the array. Unfortunately, as the comment stated, we
cannot call mddev_suspend from raid5d.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Logan Gunthorpe [Wed, 8 Jun 2022 16:27:48 +0000 (10:27 -0600)]
md/raid5-ppl: Drop unused argument from ppl_handle_flush_request()
ppl_handle_flush_request() takes an struct r5log argument but doesn't
use it. It has no buisiness taking this argument as it is only used
by raid5-cache and has no way to derference it anyway. Remove
the argument.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lars Ellenberg [Wed, 22 Jun 2022 20:49:32 +0000 (22:49 +0200)]
drbd: bm_page_async_io: fix spurious bitmap "IO error" on large volumes
We usually do all our bitmap IO in units of PAGE_SIZE.
With very small or oddly sized external meta data, or with
PAGE_SIZE != 4k, it can happen that our last on-disk bitmap page
is not fully PAGE_SIZE aligned, so we may need to adjust the size
of the IO.
We used to do that with
min_t(unsigned int, PAGE_SIZE,
last_allowed_sector - current_offset);
And for just the right diff, (unsigned int)(diff) will result in 0.
A bio of length 0 will correctly be rejected with an IO error
(and some scary WARN_ON_ONCE()) by the scsi layer.
Linus Torvalds [Tue, 2 Aug 2022 21:21:25 +0000 (14:21 -0700)]
Merge tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Refactor DM core's mempool allocation so that it clearer by not being
split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
* tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm: fix dm-raid crash if md_handle_request() splits bio
dm raid: fix address sanitizer warning in raid_resume
dm raid: fix address sanitizer warning in raid_status
dm: Start pr_preempt from the same starting path
dm: Fix PR release handling for non All Registrants
dm: Start pr_reserve from the same starting path
dm: Allow dm_call_pr to be used for path searches
dm: return early from dm_pr_call() if DM device is suspended
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
dm writecache: count number of blocks discarded, not number of discard bios
dm writecache: count number of blocks written, not number of write bios
dm writecache: count number of blocks read, not number of read bios
dm writecache: return void from functions
dm kcopyd: use __GFP_HIGHMEM when allocating pages
dm writecache: set a default MAX_WRITEBACK_JOBS
Documentation: dm writecache: Render status list as list
Documentation: dm writecache: add blank line before optional parameters
dm snapshot: fix typo in snapshot_map() comment
dm raid: remove redundant "the" in parse_raid_params() comment
dm cache: fix typo in 2 comment blocks
...
Linus Torvalds [Tue, 2 Aug 2022 20:46:35 +0000 (13:46 -0700)]
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Linus Torvalds [Tue, 2 Aug 2022 20:37:55 +0000 (13:37 -0700)]
Merge tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block
Pull io_uring zerocopy support from Jens Axboe:
"This adds support for efficient support for zerocopy sends through
io_uring. Both ipv4 and ipv6 is supported, as well as both TCP and
UDP.
The core network changes to support this is in a stable branch from
Jakub that both io_uring and net-next has pulled in, and the io_uring
changes are layered on top of that.
All of the work has been done by Pavel"
* tag 'for-5.20/io_uring-zerocopy-send-2022-07-29' of git://git.kernel.dk/linux-block: (34 commits)
io_uring: notification completion optimisation
io_uring: export req alloc from core
io_uring/net: use unsigned for flags
io_uring/net: make page accounting more consistent
io_uring/net: checks errors of zc mem accounting
io_uring/net: improve io_get_notif_slot types
selftests/io_uring: test zerocopy send
io_uring: enable managed frags with register buffers
io_uring: add zc notification flush requests
io_uring: rename IORING_OP_FILES_UPDATE
io_uring: flush notifiers after sendzc
io_uring: sendzc with fixed buffers
io_uring: allow to pass addr into sendzc
io_uring: account locked pages for non-fixed zc
io_uring: wire send zc request type
io_uring: add notification slot registration
io_uring: add rsrc referencing for notifiers
io_uring: complete notifiers in tw
io_uring: cache struct io_notif
io_uring: add zc notification infrastructure
...
Linus Torvalds [Tue, 2 Aug 2022 20:27:23 +0000 (13:27 -0700)]
Merge tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block
Pull io_uring buffered writes support from Jens Axboe:
"This contains support for buffered writes, specifically for XFS. btrfs
is in progress, will be coming in the next release.
io_uring does support buffered writes on any file type, but since the
buffered write path just always -EAGAIN (or -EOPNOTSUPP) any attempt
to do so if IOCB_NOWAIT is set, any buffered write will effectively be
handled by io-wq offload. This isn't very efficient, and we even have
specific code in io-wq to serialize buffered writes to the same inode
to avoid further inefficiencies with thread offload.
This is particularly sad since most buffered writes don't block, they
simply copy data to a page and dirty it. With this pull request, we
can handle buffered writes a lot more effiently.
If balance_dirty_pages() needs to block, we back off on writes as
indicated.
This improves buffered write support by 2-3x.
Jan Kara helped with the mm bits for this, and Stefan handled the
fs/iomap/xfs/io_uring parts of it"
* tag 'for-5.20/io_uring-buffered-writes-2022-07-29' of git://git.kernel.dk/linux-block:
mm: honor FGP_NOWAIT for page cache page allocation
xfs: Add async buffered write support
xfs: Specify lockmode when calling xfs_ilock_for_iomap()
io_uring: Add tracepoint for short writes
io_uring: fix issue with io_write() not always undoing sb_start_write()
io_uring: Add support for async buffered writes
fs: Add async write file modification handling.
fs: Split off inode_needs_update_time and __file_update_time
fs: add __remove_file_privs() with flags parameter
fs: add a FMODE_BUF_WASYNC flags for f_mode
iomap: Return -EAGAIN from iomap_write_iter()
iomap: Add async buffered write support
iomap: Add flags parameter to iomap_page_create()
mm: Add balance_dirty_pages_ratelimited_flags() function
mm: Move updates of dirty_exceeded into one place
mm: Move starting of background writeback into the main balancing loop
Linus Torvalds [Tue, 2 Aug 2022 20:20:44 +0000 (13:20 -0700)]
Merge tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- As per (valid) complaint in the last merge window, fs/io_uring.c has
grown quite large these days. io_uring isn't really tied to fs
either, as it supports a wide variety of functionality outside of
that.
Move the code to io_uring/ and split it into files that either
implement a specific request type, and split some code into helpers
as well. The code is organized a lot better like this, and io_uring.c
is now < 4K LOC (me).
- Deprecate the epoll_ctl opcode. It'll still work, just trigger a
warning once if used. If we don't get any complaints on this, and I
don't expect any, then we can fully remove it in a future release
(me).
- Improve the cancel hash locking (Hao)
- kbuf cleanups (Hao)
- Efficiency improvements to the task_work handling (Dylan, Pavel)
- Provided buffer improvements (Dylan)
- Add support for recv/recvmsg multishot support. This is similar to
the accept (or poll) support for have for multishot, where a single
SQE can trigger everytime data is received. For applications that
expect to do more than a few receives on an instantiated socket, this
greatly improves efficiency (Dylan).
- Efficiency improvements for poll handling (Pavel)
- Poll cancelation improvements (Pavel)
- Allow specifiying a range for direct descriptor allocations (Pavel)
- Cleanup the cqe32 handling (Pavel)
- Move io_uring types to greatly cleanup the tracing (Pavel)
- Tons of great code cleanups and improvements (Pavel)
- Add a way to do sync cancelations rather than through the sqe -> cqe
interface, as that's a lot easier to use for some use cases (me).
- Add support to IORING_OP_MSG_RING for sending direct descriptors to a
different ring. This avoids the usually problematic SCM case, as we
disallow those. (me)
- Make the per-command alloc cache we use for apoll generic, place
limits on it, and use it for netmsg as well (me).
- Various cleanups (me, Michal, Gustavo, Uros)
* tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits)
io_uring: ensure REQ_F_ISREG is set async offload
net: fix compat pointer in get_compat_msghdr()
io_uring: Don't require reinitable percpu_ref
io_uring: fix types in io_recvmsg_multishot_overflow
io_uring: Use atomic_long_try_cmpxchg in __io_account_mem
io_uring: support multishot in recvmsg
net: copy from user before calling __get_compat_msghdr
net: copy from user before calling __copy_msghdr
io_uring: support 0 length iov in buffer select in compat
io_uring: fix multishot ending when not polled
io_uring: add netmsg cache
io_uring: impose max limit on apoll cache
io_uring: add abstraction around apoll cache
io_uring: move apoll cache to poll.c
io_uring: consolidate hash_locked io-wq handling
io_uring: clear REQ_F_HASH_LOCKED on hash removal
io_uring: don't race double poll setting REQ_F_ASYNC_DATA
io_uring: don't miss setting REQ_F_DOUBLE_POLL
io_uring: disable multishot recvmsg
io_uring: only trace one of complete or overflow
...
Linus Torvalds [Tue, 2 Aug 2022 19:47:31 +0000 (12:47 -0700)]
Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"Only updating the turbostat tool here, no kernel changes"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2022.07.28
tools/power turbostat: do not decode ACC for ICX and SPR
tools/power turbostat: fix SPR PC6 limits
tools/power turbostat: cleanup 'automatic_cstate_conversion_probe()'
tools/power turbostat: separate SPR from ICX
tools/power turbosstat: fix comment
tools/power turbostat: Support RAPTORLAKE P
tools/power turbostat: add support for ALDERLAKE_N
tools/power turbostat: dump secondary Turbo-Ratio-Limit
tools/power turbostat: simplify dump_turbo_ratio_limits()
tools/power turbostat: dump CPUID.7.EDX.Hybrid
tools/power turbostat: update turbostat.8
tools/power turbostat: Show uncore frequency
tools/power turbostat: Fix file pointer leak
tools/power turbostat: replace strncmp with single character compare
tools/power turbostat: print the kernel boot commandline
tools/power turbostat: Introduce support for RaptorLake
Linus Torvalds [Tue, 2 Aug 2022 18:27:53 +0000 (11:27 -0700)]
Merge tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These start a rework of the handling of trip points in the thermal
core, improve the cpufreq/devfreq cooling device handling, update some
thermal control drivers and the tmon utility and clean up code.
Specifics:
- Consolidate the thermal core code by beginning to move the thermal
trip structure from the thermal OF code as a generic structure to
be used by the different sensors when registering a thermal zone
(Daniel Lezcano).
- Make per cpufreq / devfreq cooling device ops instead of using a
global variable, fix comments and rework the trace information
(Lukasz Luba).
- Add the include/dt-bindings/thermal.h under the area covered by the
thermal maintainer in the MAINTAINERS file (Lukas Bulwahn).
- Improve the error output by giving the sensor identification when a
thermal zone failed to initialize, the DT bindings by changing the
positive logic and adding the r8a779f0 support on the rcar3
(Wolfram Sang).
- Convert the QCom tsens DT binding to the dtsformat format
(Krzysztof Kozlowski).
- Remove the pointless get_trend() function in the QCom, Ux500 and
tegra thermal drivers, along with the unused DROP_FULL and
RAISE_FULL trends definitions. Simplify the code by using clamp()
macros (Daniel Lezcano).
- Fix ref_table memory leak at probe time on the k3_j72xx bandgap
(Bryan Brattlof).
- Fix array underflow in prep_lookup_table (Dan Carpenter).
- Add static annotation to the k3_j72xx_bandgap_j7* data structure
(Jin Xiaoyun).
- Fix typos in comments detected on sun8i by Coccinelle (Julia
Lawall).
- Fix typos in comments on rzg2l (Biju Das).
- Remove as unnecessary call to dev_err() as the error is already
printed by the failing function on u8500 (Yang Li).
- Register the thermal zones as hwmon sensors for the Qcom thermal
sensors (Dmitry Baryshkov).
- Fix 'tmon' tool compilation issue by adding phtread.h include
(Markus Mayer).
- Fix typo in the comments for the 'tmon' tool (Slark Xiao).
- Make the thermal core use ida_alloc()/free() directly instead of
ida_simple_get()/ida_simple_remove() that have been deprecated
(keliu).
- Drop ACPI_FADT_LOW_POWER_S0 check from the Intel PCH thermal
control driver (Rafael Wysocki)"
* tag 'thermal-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/of: Initialize trip points separately
thermal/of: Use thermal trips stored in the thermal zone
thermal/core: Add thermal_trip in thermal_zone
thermal/core: Rename 'trips' to 'num_trips'
thermal/core: Move thermal_set_delay_jiffies to static
thermal/core: Remove unneeded EXPORT_SYMBOLS
thermal/of: Move thermal_trip structure to thermal.h
thermal/of: Remove the device node pointer for thermal_trip
thermal/of: Replace device node match with device node search
thermal/core: Remove duplicate information when an error occurs
thermal/core: Avoid calling ->get_trip_temp() unnecessarily
thermal/tools/tmon: Fix typo 'the the' in comment
thermal/tools/tmon: Include pthread and time headers in tmon.h
thermal/ti-soc-thermal: Fix comment typo
thermal/drivers/qcom/spmi-adc-tm5: Register thermal zones as hwmon sensors
thermal/drivers/qcom/temp-alarm: Register thermal zones as hwmon sensors
thermal/drivers/u8500: Remove unnecessary print function dev_err()
thermal/drivers/rzg2l: Fix comments
thermal/drivers/sun8i: Fix typo in comment
thermal/drivers/k3_j72xx_bandgap: Make k3_j72xx_bandgap_j721e_data and k3_j72xx_bandgap_j7200_data static
...
Linus Torvalds [Tue, 2 Aug 2022 18:17:00 +0000 (11:17 -0700)]
Merge tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly minor improvements all over including new CPU IDs for
the Intel RAPL driver, an Energy Model rework to use micro-Watt as the
power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq
updates, documentation cleanups and a new version of the pm-graph
suite of utilities.
Specifics:
- Make cpufreq_show_cpus() more straightforward (Viresh Kumar).
- Drop unnecessary CPU hotplug locking from store() used by cpufreq
sysfs attributes (Viresh Kumar).
- Make the ACPI cpufreq driver support the boost control interface on
Zhaoxin/Centaur processors (Tony W Wang-oc).
- Print a warning message on attempts to free an active cpufreq
policy which should never happen (Viresh Kumar).
- Fix grammar in the Kconfig help text for the loongson2 cpufreq
driver (Randy Dunlap).
- Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq
governor (Zhao Liu).
- Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll
cpuidle driver (Eiichi Tsukata).
- Modify intel_idle to treat C1 and C1E as independent idle states on
Sapphire Rapids (Artem Bityutskiy).
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
function parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello)"
* tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
PM: QoS: Add check to make sure CPU freq is non-negative
PM: hibernate: defer device probing when resuming from hibernation
intel_idle: make SPR C1 and C1E be independent
cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
cpufreq: loongson2: fix Kconfig "its" grammar
pm-graph v5.9
cpufreq: Warn users while freeing active policy
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
PM: domains: Ensure genpd_debugfs_dir exists before remove
PM: runtime: Extend support for wakeirq for force_suspend|resume
...
Linus Torvalds [Tue, 2 Aug 2022 18:12:25 +0000 (11:12 -0700)]
Merge tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These rework the handling of ACPI device objects to use the driver
core facilities for managing child ones instead of some questionable
home-grown ways without the requisite locking and reference counting,
clean up the EC driver, improve suspend-to-idle handling on x86, add
some systems to the ACPI backlight quirk list, fix some assorted
issues, clean up code and improve documentation.
Specifics:
- Use facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads
in struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc
bus driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
- Prepare the CPPC library for handling backwards-compatible future
_CPC return package formats gracefully (Rafael Wysocki).
- Clean up the ACPI EC driver after previous changes in it (Hans de
Goede).
- Drop leftover acpi_processor_get_limit_info() declaration (Riwen
Lu).
- Split out thermal initialization from ACPI PSS (Riwen Lu).
- Annotate more functions in the ACPI CPU idle driver to live in the
cpuidle section (Guilherme G. Piccoli).
- Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams).
- Implement a better fix to avoid spamming the console with old error
logs (Tony Luck).
- Fix typo in a comment in the APEI code (Xiang wangx).
- Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi
Li).
- Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI
suspend-to-idle driver for x86 platforms (Shyam Sundar S K).
- Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag
in the LPIT table driver and the suspend-to-idle driver for x86
platforms (Rafael Wysocki).
- Print information messages regarding declared LPS0 idle support in
the platform firmware (Rafael Wysocki).
- Fix missing check in register_device_clock() in the ACPI driver for
Intel SoCs (huhai).
- Fix ACS setup in the VIOT table parser (Eric Auger).
- Skip IRQ override on AMD Zen platforms where it's harmful
(Chuanhong Guo).
- Use native backlight on Dell Inspiron N4010 (Hans de Goede).
- Use native backlight on some TongFang devices (Werner Sembach).
- Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen
Lu).
- Shorten the quirk list in the ACPI backlight driver by identifying
Clevo by board_name only (Werner Sembach).
- Remove useless NULL pointer checks from 2 ACPI PCI link management
functions (Andrey Strachuk).
- Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang).
- Update links and references to _DSD-related documents (Sudeep
Holla)"
* tag 'acpi-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (46 commits)
ACPI/PCI: Remove useless NULL pointer checks
ACPI: CPPC: Do not prevent CPPC from working in the future
ACPI: PM: x86: Print messages regarding LPS0 idle support
ACPI: resource: skip IRQ override on AMD Zen platforms
Documentation: ACPI: EINJ: Fix obsolete example
ACPI: video: Use native backlight on Dell Inspiron N4010
ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset
Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT"
ACPI: video: Shortening quirk list by identifying Clevo by board_name only
ACPI: video: Force backlight native for some TongFang devices
ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008
ACPI: VIOT: Fix ACS setup
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP
ACPI: LPSS: Fix missing check in register_device_clock()
ACPI: APEI: Better fix to avoid spamming the console with old error logs
...
- Add support of Aquacomputer Quadro to aquacomputer_d5next driver
- Improved assembler code and add support for Dell G5 5590 as well as
XPS 13 7390 in dell-smm driver
- Add support for ASUS TUF GAMING B550-PLUS WIFI II to nct775 driver
- Add support for IEEE 754 half precision to PMBus core. Also support
for Analog Devices LT7182S, improve regulator support, and report
various MFR register values in debugfs.
- Various other minor improvements and fixes
* tag 'hwmon-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (85 commits)
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Quadro fan controller
hwmon: (dell-smm) Improve documentation
hwmon: (nct6775) add ASUS TUF GAMING B550-PLUS WIFI II
hwmon: (occ) Replace open-coded variant of %*phN specifier
hwmon: (sht15) Fix wrong assumptions in device remove callback
hwmon: (aquacomputer_d5next) Add support for reading the +12V voltage sensor on D5 Next
hwmon: (tps23861) fix byte order in current and voltage registers
hwmon: (aspeed-pwm-tacho) increase fan tach period (again)
hwmon: (aquacomputer_d5next) Add D5 Next fan control support
hwmon: (mcp3021) improve driver support for newer hwmon interface
hwmon: (asus-ec-sensors) add definitions for ROG ZENITH II EXTREME
hwmon: (aquacomputer_d5next) Move device-specific data into struct aqc_data
hwmon: (asus-ec-sensors) add missing sensors for X570-I GAMING
hwmon: (drivetemp) Add module alias
hwmon: (asus_wmi_sensors) Save a few bytes of memory
hwmon: (lm90) Use worker for alarm notifications
hwmon: (asus-ec-sensors) add support for Maximus XI Hero
hwmon: (dell-smm) Improve assembly code
hwmon: (pmbus/ltc2978) Set voltage resolution
hwmon: (pmbus) Add list_voltage to pmbus ops
...
Linus Torvalds [Tue, 2 Aug 2022 18:04:41 +0000 (11:04 -0700)]
Merge tag 'pwm/for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"After v5.19 had all drivers converted to the new atomic API and nobody
has reported any breakage, this set of changes starts by dropping the
legacy support.
Some existing drivers get improvements and broader chip support and a
new driver is added that emulates a PWM controller using a clock
output.
Other than that there's the usual bits of cleanups and minor fixes"
* tag 'pwm/for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (21 commits)
pwm: lpc18xx: Fix period handling
pwm: lpc18xx: Convert to use dev_err_probe()
pwm: twl-led: Document some limitations and link to the reference manual
MAINTAINERS: Remove myself as PWM maintainer
MAINTAINERS: Add include/dt-bindings/pwm to PWM SUBSYSTEM
dt-bindings: pwm: mediatek: Add compatible string for MT8195
pwm: Add clock based PWM output driver
dt-bindings: pwm: Document clk based PWM controller
pwm: sifive: Shut down hardware only after pwmchip_remove() completed
pwm: sifive: Ensure the clk is enabled exactly once per running PWM
pwm: sifive: Simplify clk handling
pwm: sifive: Enable clk only after period check in .apply()
pwm: sifive: Reduce time the controller lock is held
pwm: sifive: Fold pwm_sifive_enable() into its only caller
pwm: sifive: Simplify offset calculation for PWMCMP registers
pwm: mediatek: Add MT8365 support
dt-bindings: pwm: Add MT8365 SoC binding
pwm: Drop unused forward declaration from pwm.h
pwm: Reorder header file to get rid of struct pwm_capture forward declaration
pwm: atmel-tcb: Fix typo in comment
...
Linus Torvalds [Tue, 2 Aug 2022 17:55:04 +0000 (10:55 -0700)]
Merge tag 'spi-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The big update this time around is some excellent work from David
Jander who went through the fast path and really eliminated overheads,
meaning that we are seeing a huge reduction in the time spent between
transfers for single threaded clients.
Benchmarking has been coming out at about a halving of overhead which
is clearly visible in system level usage that stresses SPI like some
CAN and IIO applications, especially with small transfers. Thanks to
David for taking the time to drill down into this and push the work
upstream.
Otherwise there's been a bunch of new device support and the usual
updates.
- Optimisation of the fast path, particularly around the number and
types of locking operations, from David Jander.
- Support for Arbel NPCM845, HP GXP, Intel Meteor Lake and Thunder
Bay, MediaTek MT8188 and MT8365, Microchip FPGAs, nVidia Tegra 241
and Samsung Exynos Auto v9 and 4210"
* tag 'spi-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (97 commits)
MAINTAINERS: add spi support to GXP
spi: dt-bindings: add documentation for hpe,gxp-spifi
spi: spi-gxp: Add support for HPE GXP SoCs
spi: a3700: support BE for AC5 SPI driver
spi/panel: dt-bindings: drop CPHA and CPOL from common properties
spi: bcm2835: enable shared interrupt support
spi: dt-bindings: spi-controller: correct example indentation
spi: dt-bindings: qcom,spi-geni-qcom: allow three interconnects
spi: npcm-fiu: Add NPCM8XX support
dt-binding: spi: Add npcm845 compatible to npcm-fiu document
spi: npcm-fiu: Modify direct read dummy configuration
spi: atmel: remove #ifdef CONFIG_{PM, SLEEP}
spi: dt-bindings: Add compatible for MediaTek MT8188
spi: dt-bindings: mediatek,spi-mtk-nor: Update bindings for nor flash
spi: dt-bindings: atmel,at91rm9200-spi: convert to json-schema
spi: tegra20-slink: fix UAF in tegra_slink_remove()
spi: Fix simplification of devm_spi_register_controller
spi: microchip-core: switch to use dev_err_probe()
spi: microchip-core: switch to use devm_spi_alloc_master()
spi: microchip-core: fix UAF in mchp_corespi_remove()
...
Linus Torvalds [Tue, 2 Aug 2022 17:12:25 +0000 (10:12 -0700)]
Merge tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The big thing this release is a big cleanup of the interrupt code from
Aidan MacDonald, plus a few new API updates:
- Rework of the interrupt code, making it much simpler and easier to
extend
- Support for device specific update bits operations with devices
that otherwise use bitstream interfaces
- Support for bit operations on fields as well as whole registers"
* tag 'regmap-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: permit to set reg_update_bits with bulk implementation
regmap: add WARN_ONCE when invalid mask is provided to regmap_field_init()
regmap-irq: Fix bug in regmap_irq_get_irq_reg_linear()
regmap: cache: Add extra parameter check in regcache_init
regmap-irq: Deprecate the not_fixed_stride flag
regmap-irq: Add get_irq_reg() callback
regmap-irq: Fix inverted handling of unmask registers
regmap-irq: Deprecate type registers and virtual registers
regmap-irq: Introduce config registers for irq types
regmap-irq: Refactor checks for status bulk read support
regmap-irq: Remove mask_writeonly and regmap_irq_update_bits()
regmap-irq: Remove inappropriate uses of regmap_irq_update_bits()
regmap-irq: Remove an unnecessary restriction on type_in_mask
regmap-irq: Cleanup sizeof(...) use in memory allocation
regmap-irq: Remove unused type_reg_stride field
regmap-irq: Convert bool bitfields to unsigned int
regmap: Don't warn about cache only mode for devices with no cache
regmap: provide regmap_field helpers for simple bit operations
regmap: cache: Fix syntax errors in comments
Linus Torvalds [Tue, 2 Aug 2022 15:35:17 +0000 (08:35 -0700)]
Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM boardfile deprecation from Arnd Bergmann:
"Over the past ten years, new machine support was based on device tree,
and an initial set of about 400 boards using ATAGS with boardfile for
booting were grandfathered in, with about half of them either removed
or converted to DT over time.
Based on the recent mailing list discussion I started, I have now
turned the findings into a set of patches that marks most board files
as 'depends on UNUSED_BOARD_FILES', leaving only 38 of the 196 boards.
For the boards that are marked as unused, there are two final chances
for potential users: The removal is scheduled to take place after the
longterm stable kernel at the end of 2022, so users can stay on that
version for another few years, and if anyone still has one of these
machines and is planning to keep updating kernels beyond that version,
they can speak up now to have their boards taken off the list again.
Waiting for the LTS release also makes sure that there will be at
least one longterm kernel that contains the recent multiplatform
conversion along while still supporting all legacy boards.
The short summary of the current status is:
- The s3c24xx, cns3xxx, iop32x and mv78xx0 platforms have no known
users and will be removed entirely.
- The mmp and davinci platforms have DT support for the important
machines and will become DT-only after this.
- s3c64xx, dove, orion5x, and pxa keep some board files to allow
those to be migrated over to DT more easily, but most board files
are getting removed now. DT support on these platforms is partially
working but requires changes to additional drivers for the other
boards.
- omap1, ep93xx, sa1100, footbridge and rpc have no DT support at the
moment but have some boards with known users. Removing the board
files that nobody uses should make it easier to try a DT conversion
if anyone cares.
There is no explicit timeline what happens with the boards that remain
after this removal, but I expect to revisit this in the future, and
with most boards gone, there will be a good time to do a treewide
review of platform drivers that never gained DT support and have no
remaining in-tree board files"
Link: https://lore.kernel.org/linux-arm-kernel/CAK8P3a0Z9vGEQbVRBo84bSyPFM-LF+hs5w8ZA51g2Z+NsdtDQA@mail.gmail.com/
* tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: cns3xxx: add CONFIG_UNUSED_BOARD_FILES dependency
ARM: iop32x: mark as unused
ARM: s3c: mark most board files as unused
ARM: omap1: add Kconfig dependencies for unused boards
ARM: sa1100: mark most boards as unused
ARM: footbridge: mark cats board for removal
ARM: mmp: mark all board files for removal
ARM: ep93xx: mark most board files as unused
ARM: davinci: mark all ATAGS board files as unused
ARM: orion: add ATAGS dependencies
ARM: pxa: add Kconfig dependencies for ATAGS based boards
ARM: add CONFIG_UNUSED_BOARD_FILES
ARM: add ATAGS dependencies to non-DT platforms
Linus Torvalds [Tue, 2 Aug 2022 15:29:18 +0000 (08:29 -0700)]
Merge tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM new SoC support from Arnd Bergmann:
"This adds initial support for two SoC families that have been under
review for a while. In both cases, the origonal idea was to have a
minimally functional version, but we ended up leaving out the clk
drivers that are still under review and will be merged through the
corresponding subsystem tree.
The Nuvoton NPCM8xx is a 64-bit Baseboard Management Controller and
based on the 32-bit NPCM7xx family but is now getting added to
arch/arm64 as well.
Sunplus SP7021, also known as Plus1, is a general-purpose
System-in-Package design based on the 32-bit Cortex-A7 SoC on the main
chip, plus an I/O chip and memory in the same"
* tag 'arm-newsoc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
MAINTAINERS: rectify entry for ARM/NUVOTON NPCM ARCHITECTURE
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
ARM: dts: Add Sunplus SP7021-Demo-V3 board device tree
ARM: sp7021_defconfig: Add Sunplus SP7021 defconfig
ARM: sunplus: Add initial support for Sunplus SP7021 SoC
irqchip: Add Sunplus SP7021 interrupt controller driver
...
Linus Torvalds [Tue, 2 Aug 2022 15:21:58 +0000 (08:21 -0700)]
Merge tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"This branch includes the usual updates to defconfig files, enabling
additional driver support for the supported platforms.
There is also a global refresh for all of them that reorders the lines
according to the 'savedefconfig' output, but without removing lines
that are no longer part of the refresh.
I went through the most common removed lines to also address them
while making sure to catch renamed options and add them back under the
new name.
The boardfile deprecation branch is based on top of this to avoid
conflicts against removing the unused boardfile configs from the
generic defconfig files"
* tag 'arm-defconfig-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: defconfig: Sync some configs with savedefconfig
arm64: refresh defconfig file
ARM: defconfig: kill remnants of CONFIG_LEDS
ARM: defconfig: remove broken CONFIG_THUMB disables
ARM: defconfig: address renamed CONFIG_DEBUG_INFO=y
ARM: defconfig: remove stale CONFIG_ZBOOT_ROM entries
ARM: defconfig: remove irda remnants
ARM: refresh defconfig files
arm64: defconfig: Demote Qualcomm USB PHYs to modules
arm64: defconfig: Enable Qualcomm SC8280XP providers
ARM: multi_v7_defconfig: Update configs for BCM63138
arm64: defconfig: enable Qualcomm Bandwidth Monitor
arm64: defconfig: Enable Allwinner built in CODECs
arm64: defconfig: Enable qcom interconnect drivers
arm64: defconfig: Enable qcom ss & hs usb phy
arm64: defconfig: enable Qualcomm LPG leds driver
arm64: defconfig: Enable gpio-fan support
arm64: defconfig: Enable DRM_V3D
ARM: configs: Enable DRM_V3D
arm64: defconfig: Enable R8A779G0 SoC
...
Linus Torvalds [Tue, 2 Aug 2022 15:15:25 +0000 (08:15 -0700)]
Merge tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM DT updates from Arnd Bergmann:
"As usual, the bulk of the changes for the SoC tree are devicetree file
updates, and most of these changes are for 64-bit embedded machines.
As before, there are a ton of style cleanups, and additional hardware
support for existing machines.
Looking only at the new SoC, the notable additions are:
- A whole family of Broadcom broadband SoCs, both 32-bit and 64-bit:
BCM63178, BCM63158, BCM4912, BCM6858, BCM6878, BCM6846, BCM63146,
BCM6856, BCM6855, BCM6756, BCM63148, and BCM6813. Each SoC comes
with a corresponding reference board.
- The new NXP i.MX93 SoC, the follow-up to the popular i.MX6 and
i.MX8 embedded SoCs, now using Cortex-A55 cores and the Ethos-U65
NPU.
- Qualcomm Snapdragon 8cx Gen3 (SC8280XP), the current high end of
Arm based Laptop SoCs, and its automotive cousin, the SA8540P. The
SC8280XP is used in the Lenovo Thinkpad X13s laptop that also gets
added here in addition to the reference boards.
- Allwinner H616, a newer version of the H6 SoC, targeted at
Set-top-box applications. It comes with dts files for the Orange Pi
zero2 single-board computer and the X96 Mate set-top-box
- Marvell Prestera 98DX2530 (AlleyCat5), a network switch chip in the
Armada SoC family based on the Cortex-A55 core.
New machines based on previously supported SoCs include:
- Several new machines on NXP i.MX platforms: multiple Toradex
Colibri boards using the "Iris" and "Ixora" carriers, DH
electronics i.MX8M Plus DHCOM and PDK2, TQ-Systems TQMa8MPQL, and
phytech phyBOARD-Polis-i.MX8MM.
- Google Chameleon v3 FPGA board based on Intel Arria10 and Stratix
10 Software Virtual platform, both in the SoCFPGA platform.
- Two new wireless devices based on Broadcom SoCs: The Asus GT-AX6000
Router and the Cisco Meraki MR26 access point
- Improved Chromebook support for both the Mediatek and Qualcomm SoC
families brought added machines: Acer Chromebook 514 (MT8192), Acer
Chromebook Spin 513 (MT8195) and a couple of SC7180 based machines
including the Lenovo IdeaPad Chromebook Duet 3.
- Xiaomi Mi Mix2s, LG G7 and LG V35 are mobile phones based on
Qualcomm SDM845, while Mi 5s Plus is based on MSM8996.
- Finally, there are a few development board on other chips: PCB8309
(Microchip lan966x), Radxa Rock Pi S (Rockchips RK3308) DH DRC
Compact (ST STM32MP1) and Inforce IFC6560 (Qualcomm SDM660)"
* tag 'arm-dt-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (829 commits)
dt-bindings: soc: bcm: use absolute path to other schema
dt-bindings: soc: bcm: drop quotes when not needed
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
ARM: dts: lan966x: Enable network driver on pcb8291
ARM: dts: lan966x: Disable can0 on pcb8291
ARM: dts: lan966x: Add gpio-restart
dt-bindings: arm: aspeed: add Aspeed Evaluation boards
arm64: dts: qcom: Add support for Xiaomi Mi Mix2s
dt-bindings: arm: qcom: Add Xiaomi Mi Mix2s bindings
dt-bindings: arm: qcom: Document lg,judyln and lg,judyp devices
dt-bindings: arm: qcom: add missing SM6350 board compatibles
dt-bindings: arm: qcom: add missing SM6125 board compatibles
dt-bindings: arm: qcom: add missing SDM845 board compatibles
dt-bindings: arm: qcom: add missing SDM636 board compatibles
dt-bindings: arm: qcom: add missing SDM630 board compatibles
dt-bindings: arm: qcom: add missing QCS404 board compatibles
...
Linus Torvalds [Tue, 2 Aug 2022 15:10:10 +0000 (08:10 -0700)]
Merge tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC drivers from Arnd Bergmann:
"The SoC driver updates contain changes to improve support for
additional SoC variants, as well as cleanups an minor bugfixes
in a number of existing drivers.
Notable updates this time include:
- Support for Qualcomm MSM8909 (Snapdragon 210) in various drivers
- Updates for interconnect drivers on Qualcomm Snapdragon
- A new driver support for NMI interrupts on Fujitsu A64fx
- A rework of Broadcom BCMBCA Kconfig dependencies
- Improved support for BCM2711 (Raspberry Pi 4) power management to
allow the use of the V3D GPU
- Cleanups to the NXP guts driver
- Arm SCMI firmware driver updates to add tracing support, and use
the firmware interfaces for system power control and for power
capping"
* tag 'arm-drivers-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (125 commits)
soc: a64fx-diag: disable modular build
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: fujitsu: Add A64FX diagnostic interrupt driver
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
tty: serial: bcm63xx: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
spi: bcm63xx-hsspi: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
clk: bcm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
hwrng: bcm2835: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
...
Linus Torvalds [Tue, 2 Aug 2022 15:02:59 +0000 (08:02 -0700)]
Merge tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The updates for arch/arm/mach-* platform code this time are mainly
minor cleanups.
Most notably, the DaVinci DM644x/DM646x SoC support gets removed. This
was also scheduled for later removal early next year, but Linus
Walleij asked for having them removed earlier to avoid problems for
the GPIO subsystem"
* tag 'arm-soc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
ARM: at91: setup outer cache .write_sec() callback if needed
ARM: at91: add sam_linux_is_optee_available() function
ARM: Marvell: Update PCIe fixup
ARM: bcmbca: Include full family name in Kconfig
ARM: bcm: NSP: Removed forced thermal selection
ARM: debug: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
arm: bcmbca: Add BCMBCA sub platforms
arm: bcmbca: Move BCM63138 ARCH_BCM_63XX to ARCH_BCMBCA
MAINTAINERS: Move BCM63138 to bcmbca arch entry
ARM: shmobile: rcar-gen2: Increase refcount for new reference
ARM: davinci: Delete DM646x board files
ARM: davinci: Delete DM644x board files
firmware: xilinx: Add TF_A_PM_REGISTER_SGI SMC call
cpufreq: zynq: Fix refcount leak in zynq_get_revision
ARM: OMAP2+: Kconfig: Fix indentation
ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
ARM: OMAP2+: pdata-quirks: Fix refcount leak bug
ARM: OMAP2+: display: Fix refcount leak bug
ARM: OMAP2+: Fix refcount leak in omapdss_init_of
ARM: imx25: support silicon revision 1.2
...
Linus Torvalds [Mon, 1 Aug 2022 19:48:15 +0000 (12:48 -0700)]
Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Updates for interrupt core and drivers:
Core:
- Fix a few inconsistencies between UP and SMP vs interrupt
affinities
- Small updates and cleanups all over the place
New drivers:
- LoongArch interrupt controller
- Renesas RZ/G2L interrupt controller
Updates:
- Hotpath optimization for SiFive PLIC
- Workaround for broken PLIC edge triggered interrupts
- Simall cleanups and improvements as usual"
* tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
irqchip/mmp: Declare init functions in common header file
irqchip/mips-gic: Check the return value of ioremap() in gic_of_init()
genirq: Use for_each_action_of_desc in actions_show()
irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch
irqchip: Add LoongArch CPU interrupt controller support
irqchip: Add Loongson Extended I/O interrupt controller support
irqchip/loongson-liointc: Add ACPI init support
irqchip/loongson-pch-msi: Add ACPI init support
irqchip/loongson-pch-pic: Add ACPI init support
irqchip: Add Loongson PCH LPC controller support
LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain
LoongArch: Use ACPI_GENERIC_GSI for gsi handling
genirq/generic_chip: Export irq_unmap_generic_chip
ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback
APCI: irq: Add support for multiple GSI domains
LoongArch: Provisionally add ACPICA data structures
irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains
irqdomain: Report irq number for NOMAP domains
irqchip/gic-v3: Fix comment typo
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC
...
* tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/ibs: Add new IBS register bits into header
perf/x86/intel: Fix PEBS data source encoding for ADL
perf/x86/intel: Fix PEBS memory access info encoding for ADL
perf/core: Add a new read format to get a number of lost samples
perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments
perf/x86/amd/uncore: Add PerfMonV2 DF event format
perf/x86/amd/uncore: Detect available DF counters
perf/x86/amd/uncore: Use attr_update for format attributes
perf/x86/amd/uncore: Use dynamic events array
x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE
Linus Torvalds [Mon, 1 Aug 2022 19:15:27 +0000 (12:15 -0700)]
Merge tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"This was a fairly quiet cycle for the locking subsystem:
- lockdep: Fix a handful of the more complex lockdep_init_map_*()
primitives that can lose the lock_type & cause false reports. No
such mishap was observed in the wild.
- jump_label improvements: simplify the cross-arch support of initial
NOP patching by making it arch-specific code (used on MIPS only),
and remove the s390 initial NOP patching that was superfluous"
* tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix lockdep_init_map_*() confusion
jump_label: make initial NOP patching the special case
jump_label: mips: move module NOP patching into arch code
jump_label: s390: avoid pointless initial NOP patching
Linus Torvalds [Mon, 1 Aug 2022 18:49:06 +0000 (11:49 -0700)]
Merge tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Load-balancing improvements:
- Improve NUMA balancing on AMD Zen systems for affine workloads.
- Improve the handling of reduced-capacity CPUs in load-balancing.
- Energy Model improvements: fix & refine all the energy fairness
metrics (PELT), and remove the conservative threshold requiring 6%
energy savings to migrate a task. Doing this improves power
efficiency for most workloads, and also increases the reliability
of energy-efficiency scheduling.
- Optimize/tweak select_idle_cpu() to spend (much) less time
searching for an idle CPU on overloaded systems. There's reports of
several milliseconds spent there on large systems with large
workloads ...
[ Since the search logic changed, there might be behavioral side
effects. ]
- Improve NUMA imbalance behavior. On certain systems with spare
capacity, initial placement of tasks is non-deterministic, and such
an artificial placement imbalance can persist for a long time,
hurting (and sometimes helping) performance.
The fix is to make fork-time task placement consistent with runtime
NUMA balancing placement.
Note that some performance regressions were reported against this,
caused by workloads that are not memory bandwith limited, which
benefit from the artificial locality of the placement bug(s). Mel
Gorman's conclusion, with which we concur, was that consistency is
better than random workload benefits from non-deterministic bugs:
"Given there is no crystal ball and it's a tradeoff, I think
it's better to be consistent and use similar logic at both fork
time and runtime even if it doesn't have universal benefit."
- Improve core scheduling by fixing a bug in
sched_core_update_cookie() that caused unnecessary forced idling.
- Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs
for newly woken tasks.
- Fix a newidle balancing bug that introduced unnecessary wakeup
latencies.
ABI improvements/fixes:
- Do not check capabilities and do not issue capability check denial
messages when a scheduler syscall doesn't require privileges. (Such
as increasing niceness.)
- Add forced-idle accounting to cgroups too.
- Fix/improve the RSEQ ABI to not just silently accept unknown flags.
(No existing tooling is known to have learned to rely on the
previous behavior.)
- Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags.
Optimizations:
- Optimize & simplify leaf_cfs_rq_list()
- Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg().
Misc fixes & cleanups:
- Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems.
- Fix a full-NOHZ bug that can in some cases result in the tick not
being re-enabled when the last SCHED_RT task is gone from a
runqueue but there's still SCHED_OTHER tasks around.
- Various PREEMPT_RT related fixes.
- Misc cleanups & smaller fixes"
* tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
rseq: Kill process when unknown flags are encountered in ABI structures
rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags
sched/core: Fix the bug that task won't enqueue into core tree when update cookie
nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
sched/core: Always flush pending blk_plug
sched/fair: fix case with reduced capacity CPU
sched/core: Use try_cmpxchg in set_nr_{and_not,if}_polling
sched/core: add forced idle accounting for cgroups
sched/fair: Remove the energy margin in feec()
sched/fair: Remove task_util from effective utilization in feec()
sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu()
sched/fair: Rename select_idle_mask to select_rq_mask
sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util()
sched/fair: Decay task PELT values during wakeup migration
sched/fair: Provide u64 read for 32-bits arch helper
sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg
sched: only perform capability check on privileged operation
sched: Remove unused function group_first_cpu()
sched/fair: Remove redundant word " *"
selftests/rseq: check if libc rseq support is registered
...
Linus Torvalds [Mon, 1 Aug 2022 18:46:58 +0000 (11:46 -0700)]
Merge tag 'slab-for-5.20_or_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- An addition of 'accounted' flag to slab allocation tracepoints to
indicate memcg_kmem accounting, by Vasily
- An optimization of memcg handling in freeing paths, by Muchun
- Various smaller fixes and cleanups
* tag 'slab-for-5.20_or_6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab_common: move generic bulk alloc/free functions to SLOB
mm/sl[au]b: use own bulk free function when bulk alloc failed
mm: slab: optimize memcg_slab_free_hook()
mm/tracing: add 'accounted' entry into output of allocation tracepoints
tools/vm/slabinfo: Handle files in debugfs
mm/slub: Simplify __kmem_cache_alias()
mm, slab: fix bad alignments
Linus Torvalds [Mon, 1 Aug 2022 17:37:00 +0000 (10:37 -0700)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Highlights include a major rework of our kPTI page-table rewriting
code (which makes it both more maintainable and considerably faster in
the cases where it is required) as well as significant changes to our
early boot code to reduce the need for data cache maintenance and
greatly simplify the KASLR relocation dance.
Summary:
- Remove unused generic cpuidle support (replaced by PSCI version)
- Fix documentation describing the kernel virtual address space
- Handling of some new CPU errata in Arm implementations
- Rework of our exception table code in preparation for handling
machine checks (i.e. RAS errors) more gracefully
- Switch over to the generic implementation of ioremap()
- Fix lockdep tracking in NMI context
- Instrument our memory barrier macros for KCSAN
- Rework of the kPTI G->nG page-table repainting so that the MMU
remains enabled and the boot time is no longer slowed to a crawl
for systems which require the late remapping
- Enable support for direct swapping of 2MiB transparent huge-pages
on systems without MTE
- Fix handling of MTE tags with allocating new pages with HW KASAN
- Expose the SMIDR register to userspace via sysfs
- Continued rework of the stack unwinder, particularly improving the
behaviour under KASAN
- More repainting of our system register definitions to match the
architectural terminology
- Improvements to the layout of the vDSO objects
- Support for allocating additional bits of HWCAP2 and exposing
FEAT_EBF16 to userspace on CPUs that support it
- Considerable rework and optimisation of our early boot code to
reduce the need for cache maintenance and avoid jumping in and out
of the kernel when handling relocation under KASLR
- Support for disabling SVE and SME support on the kernel
command-line
- Support for the Hisilicon HNS3 PMU
- Miscellanous cleanups, trivial updates and minor fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (136 commits)
arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}
arm64: fix KASAN_INLINE
arm64/hwcap: Support FEAT_EBF16
arm64/cpufeature: Store elf_hwcaps as a bitmap rather than unsigned long
arm64/hwcap: Document allocation of upper bits of AT_HWCAP
arm64: enable THP_SWAP for arm64
arm64/mm: use GENMASK_ULL for TTBR_BADDR_MASK_52
arm64: errata: Remove AES hwcap for COMPAT tasks
arm64: numa: Don't check node against MAX_NUMNODES
drivers/perf: arm_spe: Fix consistency of SYS_PMSCR_EL1.CX
perf: RISC-V: Add of_node_put() when breaking out of for_each_of_cpu_node()
docs: perf: Include hns3-pmu.rst in toctree to fix 'htmldocs' WARNING
arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags"
mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON
mm: kasan: Skip unpoisoning of user pages
mm: kasan: Ensure the tags are visible before the tag in page->flags
drivers/perf: hisi: add driver for HNS3 PMU
drivers/perf: hisi: Add description for HNS3 PMU driver
drivers/perf: riscv_pmu_sbi: perf format
perf/arm-cci: Use the bitmap API to allocate bitmaps
...
Linus Torvalds [Mon, 1 Aug 2022 17:32:06 +0000 (10:32 -0700)]
Merge tag 'm68k-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Use RNG seed from bootinfo block on virt platform
- defconfig updates
- Minor fixes and improvements
* tag 'm68k-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v5.19-rc1
m68k: Add common forward declaration for show_registers()
m68k: mac: Remove forward declaration for mac_nmi_handler()
m68k: virt: Fix missing platform_device_unregister() on error in virt_platform_init()
m68k: virt: Use RNG seed from bootinfo block
m68k: bitops: Change __fls to return and accept unsigned long
m68k: Kconfig.machine: Add endif comment
m68k: Kconfig.debug: Replace single quotes
m68k: Kconfig.cpu: Fix indentation and add endif comments
m68k: q40: Align '*' in comments
m68k: sun3: Use __func__ to get function's name in an output message
m68k: mac: Fix typos in comments
m68k: virt: Kconfig minor fixes
Linus Torvalds [Mon, 1 Aug 2022 17:17:19 +0000 (10:17 -0700)]
Merge tag 'x86_kdump_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 kdump updates from Borislav Petkov:
- Add the ability to pass early an RNG seed to the kernel from the boot
loader
- Add the ability to pass the IMA measurement of kernel and bootloader
to the kexec-ed kernel
* tag 'x86_kdump_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use rng seeds from setup_data
x86/kexec: Carry forward IMA measurement log on kexec
Linus Torvalds [Mon, 1 Aug 2022 17:14:19 +0000 (10:14 -0700)]
Merge tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build updates from Borislav Petkov:
- Fix stack protector builds when cross compiling with Clang
- Other Kbuild improvements and fixes
* tag 'x86_build_for_v6.0_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Omit use of bin2c
x86/purgatory: Hard-code obj-y in Makefile
x86/build: Remove unused OBJECT_FILES_NON_STANDARD_test_nx.o
x86/Kconfig: Fix CONFIG_CC_HAS_SANE_STACKPROTECTOR when cross compiling with clang
projects / kernel.git / log