Chris Wilson [Mon, 28 Aug 2017 10:46:31 +0000 (11:46 +0100)]
drm/i915: Recreate vmapping even when the object is pinned
Sometimes we know we are the only user of the bo, but since we take a
protective pin_pages early on, an attempt to change the vmap on the
object is denied because it is busy. i915_gem_object_pin_map() cannot
tell from our single pin_count if the operation is safe. Instead we must
pass that information down from the caller in the manner of
I915_MAP_OVERRIDE.
This issue has existed from the introduction of the mapping, but was
never noticed as the only place where this conflict might happen is for
cached kernel buffers (such as allocated by i915_gem_batch_pool_get()).
Until recently there was only a single user (the cmdparser) so no
conflicts ever occurred. However, we now use it to allocate batches for
different operations (using MAP_WC on !llc for writes) in addition to the
existing shadow batch (using MAP_WB for reads).
We could either keep both mappings cached, or use a different write
mechanism if we detect a MAP_WB already exists (i.e. clflush
afterwards), but as we haven't seen this issue in the wild (it requires
hitting the GPU reloc path in addition to the cmdparser) for simplicity
just allow the mappings to be recreated.
v2: Include the i915_MAP_OVERRIDE bit in the enum so the compiler knows
about all the valid values.
Fixes: a155bfac9fd5 ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_lut_handle # byt, completely by accident Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170828104631.8606-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Marta Lofstedt [Mon, 28 Aug 2017 12:18:10 +0000 (15:18 +0300)]
drm/i915: Beef up of Beef up the IPS vs. CRC workaround
Commit c8a64630c1e8 ("drm/i915: Beef up the IPS vs. CRC
workaround") was supposed to solve below bug. However, the
patch I tested is not the same as the one that got merged.
With this addition the test pass.
Chris Wilson [Fri, 25 Aug 2017 15:02:15 +0000 (16:02 +0100)]
drm/i915: Quietly cancel FBC activation if CRTC is turned off before worker
Since we use a worker to enable FBC on the CRTC, it is possible for the
CRTC to be switched off before we run. In this case, the CRTC will not
allow us to wait upon a vblank, so remove the DRM_ERROR as this is very
much expected.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102410 Fixes: 330a63b958c7 ("drm/i915/fbc: wait for a vblank instead of 50ms when enabling") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170825150215.19236-1-chris@chris-wilson.co.uk Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Praveen Paneri [Thu, 10 Aug 2017 18:30:33 +0000 (00:00 +0530)]
drm/i915: Fix FBC cfb stride programming for non X-tiled FB
When FBC is enabled for linear, legacy Y-tiled and Yf-tiled
surfaces on gen9, the cfb stride must be programmed by SW as
cfb_stride = ceiling[(at least plane width in pixels)/
(32 * compression limit factor)] * 8
v2: Minor fix for a build error
v3: Fixed subject, register name and platform check (Ville)
v4: Added WA details in comment (Paulo)
v5:
- Read modified reg write to preserve other bit values (Paulo)
- Store modified stride value in reg_params (Paulo)
- Keep GLK out of the WA (Paulo)
v6:
- added additional field in reg_params for gen9_wa_cfb_stride (Paulo)
- Used appropriate bit mask while writing the register (Paulo)
v7 (from Paulo):
- Fix coding style and spacing issues.
- Mask the old values before writing.
- Bikeshed comments and unnecessary checks.
Jani Nikula [Thu, 24 Aug 2017 18:54:03 +0000 (21:54 +0300)]
drm/i915/bios: throw away high level child device union
All the child device config fields, including legacy, are now available
in the same struct, so use it for everything.
As this change touches plenty of code with "p_child", rename them to
"child" while at it. Also do some simple unification and constification
where not intrusive. This in the name of avoiding extra cleanup churn
for the same lines as here.
Jani Nikula [Thu, 24 Aug 2017 18:54:02 +0000 (21:54 +0300)]
drm/i915/bios: add legacy contents to common child device config
Add legacy contents to common child device config, in preparation for
using a single child device config. Use unions where BDB versions of the
config differ. Use the naming from old_child_dev_config for legacy
fields.
Add both some new and some old fields to child device config
parameters. Prepare for switching to just one child device config. Use
naming from struct old_child_dev_config for common fields.
Ville Syrjälä [Thu, 17 Aug 2017 14:55:09 +0000 (17:55 +0300)]
drm/i915: Beef up the IPS vs. CRC workaround
Oneshot disabling of IPS when CRC capturing is started is insufficient.
IPS may get re-enabled by any plane update, and hence tests that keep
CRC capturing on across plane updates will start to see inconsistent
results as soon as IPS kicks back in. Add a new knob into the crtc state
to make sure IPS stays disabled as long as CRC capturing is enabled.
Forcing a modeset is the easiest way to handle this since that's already
how we do the panel fitter workaround. It's a little heavy handed just
for IPS, but seeing as we might already do the panel fitter workaround
I think it's better to follow that. We migth want to optimize both cases
later if someone gets too upset by the extra delay from the modeset.
v2: Check the right thing when deciding whether to force a modeset
v3: Rebase, check HAS_IPS before forcing a modeset,
move ips_force_disable check into pipe_config_supports_ips()
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101664 Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Tested-by: Marta Lofsted <marta.lofstedt@intel.com> #v2 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817145509.15549-1-ville.syrjala@linux.intel.com
Chris Wilson [Tue, 22 Aug 2017 11:05:17 +0000 (12:05 +0100)]
drm/i915: Ignore duplicate VMA stored within the per-object handle LUT
By using drm_gem_flink/drm_gem_open on an object using the same fd, it
is possible for a client to create multiple handles pointing to the same
object (tied to the same contexts and VMA), as exemplified by
igt::gem_handle_to_libdrm_bo(). Since this duplication has been possible
since forever, we cannot assume that the handle:(fpriv, object) is
unique and so must handle the multiple users of a single VMA.
v2: Added commentary noise.
Testcase: igt/gem_close
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102355 Fixes: 1b5dde0153b2 ("drm/i915: Replace execbuf vma ht with an idr") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170822110517.22277-3-chris@chris-wilson.co.uk Tested-by: Marta Lofstedt <marta.lofstedt@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Chris Wilson [Tue, 22 Aug 2017 11:05:16 +0000 (12:05 +0100)]
drm/i915: Assert that the handle->vma lut is empty on object close
Make sure that we are not leaking an entry in the ctx->handles_lut by
asserting that the object was removed prior to being freed. This should
be enforced by all such handles being removed by i915_gem_close_object.
Chris Wilson [Tue, 22 Aug 2017 11:05:15 +0000 (12:05 +0100)]
drm/i915: Assert the context is not closed on object-close
During the context-close, we should be decoupling all the vma from the
object so that upon object-closing we shouldn't see any vma from the
already closed contexts. So include a check upon closing the object that
the context is still open.
v2: Eek, the fpriv check is required for shared objects. Double eek, BAT
passed?
To avoid a potential hang condition with TLB invalidation
we need to enable masked bit 5 of MMIO 0xE5F0 at boot.
Same workaround was in place for previous platforms,
but the register offset has changed for CNL.
But also BSpec doesn't mention the bit 15 as set on gen9
platforms and mark bit as reserved on CNL.
Chris Wilson [Tue, 22 Aug 2017 17:38:28 +0000 (18:38 +0100)]
drm/i915: Keep a small stash of preallocated WC pages
We use WC pages for coherent writes into the ppGTT on !llc
architectures. However, to create a WC page requires a stop_machine(),
i.e. is very slow. To compensate we currently keep a per-vm cache of
recently freed pages, but we still see the slow startup of new contexts.
We can amoritize that cost slightly by allocating WC pages in small
batches (PAGEVEC_SIZE == 14) and since creating a WC page implies a
stop_machine() there is no penalty for keeping that stash global.
Chris Wilson [Thu, 17 Aug 2017 12:37:06 +0000 (13:37 +0100)]
drm/i915: Boost GPU clocks if we miss the pageflip's vblank
If we miss the current vblank because the gpu was busy, that may cause a
jitter as the frame rate temporarily drops. We try to limit the impact
of this by then boosting the GPU clock to deliver the frame as quickly
as possible. Originally done in commit 808d1ecace30 ("drm/i915: Boost GPU
frequency if we detect outstanding pageflips") but was never forward
ported to atomic and finally dropped in commit 6d6647463981 ("drm/i915:
Rip out legacy page_flip completion/irq handling").
One of the most typical use-cases for this is a mostly idle desktop.
Rendering one frame of the desktop's frontbuffer can easily be
accomplished by the GPU running at low frequency, but often exceeds
the time budget of the desktop compositor. The result is that animations
such as opening the menu, doing a fullscreen switch, or even just trying
to move a window around are slow and jerky. We need to respond within a
frame to give the best impression of a smooth UX, as a compromise we
instead respond if that first frame misses its goal. The result should
be a near-imperceivable initial delay and a smooth animation even
starting from idle. The cost, as ever, is that we spend more power than
is strictly necessary as we overestimate the required GPU frequency and
then try to ramp down.
This of course is reactionary, too little, too late; nevertheless it is
surprisingly effective.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102199 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817123706.6777-1-chris@chris-wilson.co.uk Tested-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Ville Syrjälä [Fri, 18 Aug 2017 13:49:58 +0000 (16:49 +0300)]
drm/i915: Constify states passed to enable/disable/etc. encoder hooks
The enable/disable/etc. encoder hooks aren't supposed to alter the
state(s), so pass them as const. Unfortunately C lacks any kind of deep
const thingy, so this can't catch all abuses. But at least it acts as a
hint to the reader telling them not to mess about with the state(s).
v2: Update intel_tv_mode_find() and ironlake_edp_pll_on() as well
v3: Deal with intel_sdvo_connector_state
Ville Syrjälä [Fri, 18 Aug 2017 13:49:56 +0000 (16:49 +0300)]
drm/i915: Plumb crtc_state to PSR enable/disable
The PSR enable/disable need to know things about the crtc state, so
plumb it through. This will become even more important when we start
to reuse the generic infoframe code for the VSC DIP programming as the
infoframe code wants the crtc state as well.
Ville Syrjälä [Fri, 18 Aug 2017 13:49:55 +0000 (16:49 +0300)]
drm/i915: Init infoframe vfuncs for DP encoders as well
DP ports may want to use the video DIP for SDP transmission, so let's
initialize the vfuncs for DP encoders as well. The only exception is
port A eDP prior to HSW as that one doesn't have a video DIP instance.
Ville Syrjälä [Tue, 22 Aug 2017 14:09:14 +0000 (17:09 +0300)]
drm/i915: Disable infoframes when shutting down DDI HDMI
Disabling the video DIP when shutting the port down seems like a good
idea.
Bspec says:
"When disabling both the DIP port and DIP transmission,
first disable the port and then disable DIP."
and
"Restriction : GCP is only supported with HDMI when the bits per color is
not equal to 8. GCP must be enabled prior to enabling TRANS_DDI_FUNC_CTL
for HDMI with bits per color not equal to 8 and disabled after disabling
TRANS_DDI_FUNC_CTL"
So let's do it in the .post_disable() hook.
v2: Remove double "dpms off" caused by rebase fail
Michel Thierry [Fri, 18 Aug 2017 17:23:42 +0000 (10:23 -0700)]
drm/i915: Re-enable per-engine reset for Broxton
The corruption in CSB mmio reads we were seeing has been tracked down to
incorrectly touching forcewake of all domains, following an engine reset.
It is still a mistery why we only catched this in Broxton, since it
could happen in any platform.
With that fix already merged, commit 89853a6bd0e3 ("drm/i915: Stop
touching forcewake following a gen6+ engine reset"), lets try to enable
per-engine resets in Broxton one more time.
This reverts commit f188258bde0f ("drm/i915: Disable per-engine reset for
Broxton").
Jani Nikula [Fri, 18 Aug 2017 09:30:19 +0000 (12:30 +0300)]
drm/i915/dp: rename intel_dp_is_edp to intel_dp_is_port_edp
Emphasize that this is based on the port, not intel_dp. This is also in
line with the underlying intel_bios_is_port_edp() function. No
functional changes.
Rodrigo Vivi [Tue, 15 Aug 2017 23:16:51 +0000 (16:16 -0700)]
drm/i915/cnl: Apply large line width optimization
This bit enables hardware that will change the approximation used for distances
calculations for AA wide lines so that they are rendered more accurately.
The default value for this bit leaves the legacy behavior. There is no good
reason to not enable the new approximation except if comparing to previous GEN
rendered images.
v2: Rebase
v3: Fix author.
Rebased by Rodrigo who also added a comment as suggested by Oscar.
Since it is surrounded by Workarounds let's just add a comment to
make clear it is not an Wa.
Let's inherit workarounds from previous platforms that
according to wa_database and BSpec are still valid for
Cannonlake.
v2: Add missed workarounds.
v3: Rebase
v4: Remove bad chunk that was added to rc6 disable. (Ander)
Also remove A0 W/a that are not needed anymore.
v5: Rebase on top of CFL.
v6: Remove empty gen9_init_perctx_bb and gen9_init_indirectctx_bb
since they don't carry any gen10 related W/a. (by Oscar).
Also Remove A0 exclusive workaround.
v7: Remove more A0 exclusive workarounds. As pointed out by Oscar
many workarounds were changed to be A0 only so let's remove
them.
Chris Wilson [Mon, 7 Aug 2017 12:19:19 +0000 (13:19 +0100)]
drm/i915: Clear lost context-switch interrupts across reset
During a global reset, we disable the irq. As we disable the irq, the
hardware may be raising a GT interrupt that we then ignore, leaving it
pending in the GTIIR. After the reset, we then re-enable the irq,
triggering the pending interrupt. However, that interrupt was for the
stale state from before the reset, and the contents of the CSB buffer
are now invalid.
v2: Add a comment to make it clear that the double clear is purely my
paranoia.
Andy Shevchenko [Thu, 17 Aug 2017 10:55:41 +0000 (13:55 +0300)]
drm/i915/bxt: use NULL for GPIO connection ID
The commit ec18aede5b20
("drm/i915/bxt: add bxt dsi gpio element support")
enables GPIO support for Broxton based platforms.
While using that API we might get into troubles in the future, because
we can't rely on label name in the driver since vendor firmware might
provide any GPIO pin there, e.g. "reset", and even mark it in _DSD (in
which case the request will fail).
To avoid inconsistency and potential issues we have two options:
a) generate GPIO ACPI mapping table and supply it via
acpi_dev_add_driver_gpios(), or
b) just pass NULL as connection ID.
The b) approach is much simpler and would work since the driver relies
on GPIO indices only. Moreover, the _CRS fallback mechanism, when
requesting GPIO, has been made stricter, and supplying non-NULL
connection ID when neither _DSD, nor GPIO ACPI mapping is present, is
making request fail.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101921 Fixes: 19c3cebd37c7 ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: Mika Kahola <mika.kahola@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Tested-by: Mika Kahola <mika.kahola@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817105541.63914-1-andriy.shevchenko@linux.intel.com
Chris Wilson [Thu, 17 Aug 2017 14:47:19 +0000 (15:47 +0100)]
drm/i915: Mark the GT as busy before idling the previous request
In a synchronous setup, we may retire the last request before we
complete allocating the next request. As the last request is retired, we
queue a timer to mark the device as idle, and promptly have to execute
ad cancel that timer once we complete allocating the request and need to
keep the device awake. If we rearrange the mark_busy() to occur before
we retire the previous request, we can skip this ping-pong.
v2: Joonas pointed out that unreserve_seqno() was now doing more than
doing seqno handling and should be renamed to reflect its wider purpose.
That also highlighted the new asymmetry with reserve_seqno(), so fixup
that and rename both to [un]reserve_engine().
Chris Wilson [Wed, 16 Aug 2017 08:52:08 +0000 (09:52 +0100)]
drm/i915: Replace execbuf vma ht with an idr
This was the competing idea long ago, but it was only with the rewrite
of the idr as an radixtree and using the radixtree directly ourselves,
along with the realisation that we can store the vma directly in the
radixtree and only need a list for the reverse mapping, that made the
patch performant enough to displace using a hashtable. Though the vma ht
is fast and doesn't require any extra allocation (as we can embed the node
inside the vma), it does require a thread for resizing and serialization
and will have the occasional slow lookup. That is hairy enough to
investigate alternatives and favour them if equivalent in peak performance.
One advantage of allocating an indirection entry is that we can support a
single shared bo between many clients, something that was done on a
first-come first-serve basis for shared GGTT vma previously. To offset
the extra allocations, we create yet another kmem_cache for them.
Chris Wilson [Wed, 16 Aug 2017 08:52:07 +0000 (09:52 +0100)]
drm/i915: Simplify eb_lookup_vmas()
Since the introduction of being able to perform a lockless lookup of an
object (i915_gem_object_get_rcu() in 254199ca8f79 ("drm/i915: Move object
release to a freelist + worker") we no longer need to split the
object/vma lookup into 3 phases and so combine them into a much simpler
single loop.
Chris Wilson [Wed, 16 Aug 2017 08:52:06 +0000 (09:52 +0100)]
drm/i915: Convert execbuf to use struct-of-array packing for critical fields
When userspace is doing most of the work, avoiding relocs (using
NO_RELOC) and opting out of implicit synchronisation (using ASYNC), we
still spend a lot of time processing the arrays in execbuf, even though
we now should have nothing to do most of the time. One issue that
becomes readily apparent in profiling anv is that iterating over the
large execobj[] is unfriendly to the loop prefetchers of the CPU and it
much prefers iterating over a pair of arrays rather than one big array.
v2: Clear vma[] on construction to handle errors during vma lookup
Chris Wilson [Wed, 16 Aug 2017 08:52:05 +0000 (09:52 +0100)]
drm/i915: Check context status before looking up our obj/vma
Since we keep the context around across the slow lookup where we may
drop the struct_mutex, we should double check that the context is still
valid upon reacquisition.
Chris Wilson [Wed, 16 Aug 2017 08:52:04 +0000 (09:52 +0100)]
drm/i915: Don't use MI_STORE_DWORD_IMM on Sandybridge/vcs
MI_STORE_DWORD_IMM just doesn't work on the video decode engine under
Sandybridge, so refrain from using it. Then switch the selftests over to
using the now common test prior to using MI_STORE_DWORD_IMM.
Fixes: a155bfac9fd5 ("drm/i915: Async GPU relocation processing") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.13-rc1+ Link: https://patchwork.freedesktop.org/patch/msgid/20170816085210.4199-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Chris Wilson [Thu, 17 Aug 2017 17:32:29 +0000 (18:32 +0100)]
drm/i915: Stop touching forcewake following a gen6+ engine reset
Forcewake is not affected by the engine reset on gen6+. Indeed the
reason why we added intel_uncore_forcewake_reset() to
gen6_reset_engines() was to keep the bookkeeping intact because the
reset did not touch the forcewake bit (yet we cancelled the forcewake
consumers)! This was done in commit f9f161e3f8b88:
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Fri Aug 23 16:52:30 2013 +0300
drm/i915: sanitize forcewake registers on reset
In reset we try to restore the forcewake state to
pre reset state, using forcewake_count. The reset
doesn't seem to clear the forcewake bits so we
get warn on forcewake ack register not clearing.
That futzing of the forcewake bookkeeping was dropped in commit 54dbe639e1c7 ("drm/i915: Consolidate forcewake resetting to a single
function"), but it did not make the realisation that the remaining
intel_uncore_forcewake_reset() was redundant.
The new danger with using intel_uncore_forcewake_reset() with per-engine
resets is that the driver and hw are still in an active state as we
perform the reset. We may be using the forcewake to read protected
registers elsewhere and those results may be clobbered by the concurrent
dropping of forcewake.
Reported-by: Michel Thierry <michel.thierry@intel.com> Fixes: 0f9eb0e20641 ("drm/i915: Modify error handler for per engine hang recovery") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170817173229.20324-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Daniel Vetter [Tue, 15 Aug 2017 16:01:01 +0000 (18:01 +0200)]
MAINTAINERS: drm/i915 has a new maintainer team
For a bunch of reasons[1] I've decided to step down as maintainer and
let some other folks enjoy the reputation and hang out in the
spotlight.
Jani is going to stick around with his expertise in kms and having
done the fixes flow for a long time now. Joonas will join and bring in
his knowledge on all things GEM. Rodrigo has been less visible because
he's been doing tons of work taking care of the internal branch, and
it'd be good to have more continuity between these two worlds also on
the maintainer side.
1: They all boil down to: This is going to happen sooner or later
anyway, we have a great team, with the process improvements over the
last few years things work rather well, now is as good as any time to
do this. With that change I'll have more time for other aspects of the
stack development than maintainership.
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170815160101.1683-1-daniel.vetter@ffwll.ch
Anusha Srivatsa [Wed, 16 Aug 2017 23:45:14 +0000 (16:45 -0700)]
drm/i915: Split pin mapping into per platform functions
Cleanup the code. Map the pins in accordance to
individual platforms rather than according to ports.
Create separate functions for platforms.
v2:
- Add missing condition for CoffeeLake. Make platform
specific functions static. Add function
i915_ddc_pin_mapping().
v3:
- Rename functions to x_port_to_ddc_pin() which directly
indicates the purpose. Correct default return values on CNP
and BXT. Rename i915_port_to_ to g4x_port_to since that was
the first platform to run this. Correct code style. (Paulo)
Sugested-by Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502927114-24012-1-git-send-email-anusha.srivatsa@intel.com
Jani Nikula [Thu, 17 Aug 2017 11:52:09 +0000 (14:52 +0300)]
drm/i915/opregion: let user specify override VBT via firmware load
Sometimes it would be most enlightening to debug systems by replacing
the VBT to be used. For example, in the referenced bug the BIOS provides
different VBT depending on the boot mode (UEFI vs. legacy). It would be
interesting to try the failing boot mode with the VBT from the working
boot, and see if that makes a difference.
Add a module parameter to load the VBT using the firmware loader, not
unlike the EDID firmware mechanism.
As a starting point for experimenting, one can pick up the BIOS provided
VBT from /sys/kernel/debug/dri/0/i915_opregion/i915_vbt.
v2: clarify firmware load return value check (Bob)
Paulo Zanoni [Fri, 11 Aug 2017 23:38:25 +0000 (16:38 -0700)]
drm/i915/gen10: implement gen 10 watermarks calculations
They're slightly different than the gen 9 calculations.
v2: Remove TODO comment. Code matches recent spec.
v3: Rebase on top of latest skl code using new fp16.16 and
fixing a logic issue. Auto rebase bot has apparently
made some bad decisions that changed the logic of the
code. (Noticed by Manesh, updated by Rodrigo).
Jani Nikula [Fri, 11 Aug 2017 11:39:07 +0000 (14:39 +0300)]
drm/i915/vbt: ignore extraneous child devices for a port
Ever since we've parsed VBT child devices, starting from f8c086159d6d
("drm/i915: use the HDMI DDI buffer translations from VBT"), we've
ignored the child device information if more than one child device
references the same port. The rationale for this seems lost in time.
Since commit b66e3ab39e9f ("drm/i915: don't init DP or HDMI when not
supported by DDI port") we started using this information more to skip
HDMI/DP init if the port wasn't there per VBT child devices. However, at
the same time it added port defaults without further explanation.
Thus, if the child device info was skipped due to multiple child devices
referencing the same port, the device info would be retrieved from the
somewhat arbitrary defaults.
Finally, when commit d531b25da7b8 ("drm/i915/vbt: split out defaults
that are set when there is no VBT") stopped initializing the defaults
whenever VBT is present, thus trusting the VBT more, we stopped
initializing ports which were referenced by more than one child device.
Apparently at least Asus UX305UA, UX305U, and UX306U laptops have VBT
child device blocks which cause this behaviour. Arguably they were
shipped with a broken VBT.
Relax the rules for multiple references to the same port, and use the
first child device info to reference a port. Retain the logic to debug
log about this, though.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101745
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196233 Fixes: d531b25da7b8 ("drm/i915/vbt: split out defaults that are set when there is no VBT") Tested-by: Oliver Weißbarth <mail@oweissbarth.de> Reported-by: Oliver Weißbarth <mail@oweissbarth.de> Reported-by: Didier G <didierg-divers@orange.fr> Reported-by: Giles Anderson <agander@gmail.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: <stable@vger.kernel.org> # v4.12+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811113907.6716-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jim Bride [Wed, 9 Aug 2017 19:48:53 +0000 (12:48 -0700)]
drm/i915/edp: Allow alternate fixed mode for eDP if available.
Some fixed resolution panels actually support more than one mode,
with the only thing different being the refresh rate. Having this
alternate mode available to us is desirable, because it allows us to
test PSR on panels whose setup time at the preferred mode is too long.
With this patch we allow the use of the alternate mode if it's
available and it was specifically requested.
v2 and v3: Rebase
v4: * Fix up some leaky mode stuff (Chris)
* Rebase
v5: * Fix a NULL pointer derefrence (David Weinehall)
v6: * Whitespace / spelling / checkpatch clean-up; no functional
change. (David)
* Rebase
Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Signed-off-by: Jim Bride <jim.bride@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502308133-26892-1-git-send-email-jim.bride@linux.intel.com
Jason Ekstrand [Tue, 15 Aug 2017 14:57:33 +0000 (15:57 +0100)]
drm/i915: Add support for drm syncobjs
This commit adds support for waiting on or signaling DRM syncobjs as
part of execbuf. It does so by hijacking the currently unused cliprects
pointer to instead point to an array of i915_gem_exec_fence structs
which containe a DRM syncobj and a flags parameter which specifies
whether to wait on it or to signal it. This implementation
theoretically allows for both flags to be set in which case it waits on
the dma_fence that was in the syncobj and then immediately replaces it
with the dma_fence from the current execbuf.
v2:
- Rebase on new syncobj API
v3:
- Pull everything out into helpers
- Do all allocation in gem_execbuffer2
- Pack the flags in the bottom 2 bits of the drm_syncobj*
v4:
- Prevent a potential race on syncobj->fence
Chris Wilson [Fri, 11 Aug 2017 10:57:31 +0000 (11:57 +0100)]
drm/i915: Handle full s64 precision for wait-ioctl
The wait-ioctl is optionally supplied a timeout with nanosecond
precision in a s64 field. We use nsecs_to_jiffies64() to convert that
into the jiffies consumed by the scheduler, but internally
nsecs_to_jiffies64() does not guard against overflow (as it's purpose is
for use by the scheduler and not drivers!). So we must guard against the
overflow ourselves, and in the process note that we may then return
much earlier than the timeout selected by the user, so don't report
ETIME unless we do hit the timeout. (Woe betold us though if the user
waits for a year (32bit) and the request is still not complete!)
v2: Refine overflow detection (to not include an overffow itself)
Reported-by: Jason Ekstrand <jason.ekstrand@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170811105731.9482-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Fri, 11 Aug 2017 11:11:16 +0000 (12:11 +0100)]
drm/i915: Split obj->cache_coherent to track r/w
Another month, another story in the cache coherency saga. This time, we
come to the realisation that i915_gem_object_is_coherent() has been
reporting whether we can read from the target without requiring a cache
invalidate; but we were using it in places for testing whether we could
write into the object without requiring a cache flush. So split the
tracking into two, one to decide before reads, one after writes.
See commit a24791b19b6b ("drm/i915: Mark CPU cache as dirty on every
transition for CPU writes") for the previous entry in this saga.
v2: Be verbose
v3: Remove unused function (i915_gem_object_is_coherent)
v4: Fix inverted coherency check prior to execbuf (from v2)
v5: Add comment for nasty code where we are optimising on gcc's behalf.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101109
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101555
Testcase: igt/kms_mmap_write_crc
Testcase: igt/kms_pwrite_crc Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Dongwon Kim <dongwon.kim@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Tested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811111116.10373-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Imre Deak [Mon, 14 Aug 2017 15:15:30 +0000 (18:15 +0300)]
drm/i915/hsw+: Add support for multiple power well regs
Future platforms increase the number of power wells which require
additional control registers. A convenient way to select the correct
register is to use the high bits of the power well ID as index. This
patch only prepares for this, while upcoming platform enabling patches
will add the actual new power well IDs and corresponding power well
control registers.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Rakshmi Bhatia <rakshmi.bhatia@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Reviewed-by: Rakshmi Bhatia <rakshmi.bhatia@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170814151530.24154-2-imre.deak@intel.com
Imre Deak [Mon, 14 Aug 2017 15:15:29 +0000 (18:15 +0300)]
drm/i915: Work around GCC anonymous union initialization bug
GCC 4.4 can't cope with anonymous union initializers which seems to be a
bug in that version (see the Reference) and is fixed since GCC version
4.6. A workaround which is also used elsewhere in the kernel for the
same purpose is to wrap the initialization in curly braces, so do the
same here.
Fixes: b6e561d079fd ("drm/i915/bxt, glk: Give a proper name to the power well struct phy field")
Reference: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10676 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170814151530.24154-1-imre.deak@intel.com
Daniel Vetter [Tue, 15 Aug 2017 10:52:38 +0000 (12:52 +0200)]
Merge tag 'gvt-next-2017-08-15' of https://github.com/01org/gvt-linux into drm-intel-next-queued
gvt-next-2017-08-15
gvt update for 4.14
- MMIO save/restore optimization (Changbin)
- Split workload scan vs. dispatch for more parallel exec (Ping)
- vGPU full 48bit ppgtt support (Joonas, Tina)
- vGPU hw id expose for perf (Zhenyu)
- other misc cleanup and fixes
drm/i915: Initialize 'data' in intel_dsi_dcs_backlight.c
variable 'data' may be used uninitialized in this function. thus,
'function dcs_get_backlight' will return unwanted value/fail.
Thus, adding NULL initialized to 'data' variable will solve the return
failure happening.
v2: Change commit message to reflect upstream with proper message
Fixes: 7a48af9888a9 ("drm/i915/dsi: Add DCS control for Panel PWM") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com> Cc: Deepak M <m.deepak@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Balasubramaniam, Hari Chand <hari.chand.balasubramaniam@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502762746-191826-1-git-send-email-hari.chand.balasubramaniam@intel.com
Manasi Navare [Thu, 8 Jun 2017 20:41:03 +0000 (13:41 -0700)]
drm/i915/dp: Validate the compliance test link parameters
Validate the compliance test link parameters when the compliance
test dpcd registers are read. Also validate them in compute_config
before using them since the max values might have been reduced
due to link training fallback.
If either the link rate or lane count is invalid, we still bail
from using the test parameters since the combination would not work
and instead use the fallback values.
v2:
* Added commit message to explain why we still bail when either of
of the params is invalid (Ville Syrjala)
* Add reason for validating in the comment (Jani Nikula)
* Also check if index >= 0 after validating (Jani Nikula)
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1496954463-18038-2-git-send-email-manasi.d.navare@intel.com
Manasi Navare [Thu, 8 Jun 2017 20:41:02 +0000 (13:41 -0700)]
drm/i915/dp: Generalize intel_dp_link_params function to accept arguments to be validated
This function now takes the link rate and lane ocunt to be validated
as an argument so that this can be used for validating even the
compliance test link parameters.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com> Tested-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1496954463-18038-1-git-send-email-manasi.d.navare@intel.com
Tina Zhang [Mon, 14 Aug 2017 07:24:14 +0000 (15:24 +0800)]
drm/i915/gvt: Fix guest i915 full ppgtt blocking issue
Guest i915 full ppgtt functionality was blocking by an issue, which would
lead to gpu hardware hang. Guest i915 driver may update the ppgtt table
just before this workload is going to be submitted to the hardware by
device model. This case wasn't handled well by device model before, due
to the small time window between removing old ppgtt entry and adding the
new one. Errors occur when the workload is executed by hardware during
that small time window. This patch is to remove this time window by adding
the new ppgtt entry first and then remove the old one.
Changes in v2:
- Move VGT_CAPS_FULL_PPGTT introduction to patch 2/4. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on gvt
side. (Joonas)
- Change the title from "reorder the shadow ppgtt update process by adding
entry first" to "Fix guest i915 full ppgtt blocking issue". (Tina)
Changes since v3:
- Rebase to the latest branch.
Changes since v4:
- Tested by Tina Zhang.
Changes since v5:
- Rebase to the latest branch.
v6:
- Update full 48bit ppgtt definition
Cc: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Tina Zhang [Mon, 14 Aug 2017 07:20:46 +0000 (15:20 +0800)]
drm/i915: Enable guest i915 full ppgtt functionality
Enable the guest i915 full ppgtt functionality when host can provide this
capability. vgt_caps is introduced to guest i915 driver to get the vgpu
capabilities from the device model. VGT_CPAS_FULL_PPGTT is one of the
capabilities type to let guest i915 dirver know that the guest i915 full
ppgtt is supported by device model.
Notice that the minor version of pvinfo isn't bumped because of this
vgt_caps introduction, due to older guest would be broken by simply
increasing the pvinfo version. Although the pvinfo minor version doesn't
increase, the compatibility won't be blocked. The compatibility is ensured
by checking the value of caps field in pvinfo. Zero means no full ppgtt
support and BIT(2) means this feature is provided.
Changes since v1:
- Use u32 instead of uint32_t (Joonas)
- Move VGT_CAPS_FULL_PPGTT introduction to this patch and use #define
instead of enum (Joonas)
- Rewrite the vgpu full ppgtt capability checking logic. (Joonas)
- Some coding style refine. (Joonas)
Changes since v2:
- Divide the whole patch set into two separate patch series, with one
patch in i915 side to check guest i915 full ppgtt capability and enable
it when this capability is supported by the device model, and the other
one in gvt side which fixs the blocking issue and enables the device
model to provide the capability to guest. And this patch focuses on guest
i915 side. (Joonas)
- Change the title from "introduce vgt_caps to pvinfo" to
"Enable guest i915 full ppgtt functionality". (Tina)
Change since v3:
- Add some comments about pvinfo caps and version. (Joonas)
Change since v4:
- Tested by Tina Zhang.
Change since v5:
- Add limitation about supporting 32bit full ppgtt.
Change since v6:
- Change the fallback to 48bit full ppgtt if i915.ppgtt_enable=2. (Zhenyu)
Change in v9:
- Remove the fixme comment due to no plan for 32bit full ppgtt
support. (Zhenyu)
- Reorder the patch-set to fix compiling issue with git-bisect. (Zhenyu)
- Add print log when forcing guest 48bit full ppgtt. (Zhenyu)
v10:
- Update against Joonas's has_full_ppgtt and has_full_48bit_ppgtt disconnect
change. (Zhenyu)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> # in v2 Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Tina Zhang <tina.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Joonas Lahtinen [Fri, 11 Aug 2017 09:51:26 +0000 (12:51 +0300)]
drm/i915: Disconnect 32 and 48 bit ppGTT support
Configurations like virtualized environments may support only 48 bit
ppGTT without supporting 32 bit ppGTT. Support this by disconnecting
the relationship of the two feature bits.
Cc: Tina Zhang <tina.zhang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Zhi Wang <zhi.a.wang@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Daniel Vetter [Tue, 8 Aug 2017 08:08:28 +0000 (10:08 +0200)]
drm/i915: More surgically unbreak the modeset vs reset deadlock
There's no reason to entirely wedge the gpu, for the minimal deadlock
bugfix we only need to unbreak/decouple the atomic commit from the gpu
reset. The simplest way to fix that is by replacing the
unconditional fence wait a the top of commit_tail by a wait which
completes either when the fences are done (normal case, or when a
reset doesn't need to touch the display state). Or when the gpu reset
needs to force-unblock all pending modeset states.
The lesser source of deadlocks is when we try to pin a new framebuffer
and run into a stall. There's a bunch of places this can happen, like
eviction, changing the caching mode, acquiring a fence on older
platforms. And we can't just break the depency loop and keep going,
the only way would be to break out and restart. But the problem with
that approach is that we must stall for the reset to complete before
we grab any locks, and with the atomic infrastructure that's a bit
tricky. The only place is the ioctl code, and we don't want to insert
code into e.g. the BUSY ioctl. Hence for that problem just create a
critical section, and if any code is in there, wedge the GPU. For the
steady-state this should never be a problem.
Note that in both cases TDR itself keeps working, so from a userspace
pov this trickery isn't observable. Users themselvs might spot a short
glitch while the rendering is catching up again, but that's still
better than pre-TDR where we've thrown away all the rendering,
including innocent batches. Also, this fixes the regression TDR
introduced of making gpu resets deadlock-prone when we do need to
touch the display.
One thing I noticed is that gpu_error.flags seems to use both our own
wait-queue in gpu_error.wait_queue, and the generic wait_on_bit
facilities. Not entirely sure why this inconsistency exists, I just
picked one style.
A possible future avenue could be to insert the gpu reset in-between
ongoing modeset changes, which would avoid the momentary glitch. But
that's a lot more work to implement in the atomic commit machinery,
and given that we only need this for pre-g4x hw, of questionable
utility just for the sake of polishing gpu reset even more on those
old boxes. It might be useful for other features though.
v2: Rebase onto 4.13 with a s/wait_queue_t/struct wait_queue_entry/.
v3: Really emabarrassing fixup, I checked the wrong bit and broke the
unbreak/wakeup logic.
v4: Also handle deadlocks in pin_to_display.
v5: Review from Michel:
- Fixup the BUILD_BUG_ON
- Don't forget about the overlay
Cc: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Cc: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-3-daniel.vetter@ffwll.ch Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Daniel Vetter [Tue, 8 Aug 2017 08:08:27 +0000 (10:08 +0200)]
drm/i915: Push i915_sw_fence_wait into the nonblocking atomic commit
Blocking in a worker is ok, that's what the unbound_wq is for. And it
unifies the paths between the blocking and nonblocking commit, giving
me just one path where I have to implement the deadlock avoidance
trickery in the next patch.
I first tried to implement the following patch without this rework, but
force-completing i915_sw_fence creates some serious challenges around
properly cleaning things up. So wasn't a feasible short-term approach.
Another approach would be to simple keep track of all pending atomic
commit work items and manually queue them from the reset code. With the
caveat that double-queue in case we race with the i915_sw_fence must be
avoided. Given all that, taking the cost of a double schedule in atomic
for the short-term fix is the best approach, but can be changed in the future of course.
v2: Amend commit message (Chris).
v3: Add comment explaining why we do nothing in the sw_fence complete
callback (Michel).
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-2-daniel.vetter@ffwll.ch
Because defense-in-depth is good it's good to still have both. Also
note that with the locking change we can now restrict this a lot (old
gpus and special testing only), so this doesn't kill the TDR benefits
on at least anything remotely modern.
And futuremore with a few tricks it should be possible to make a much
more educated guess about whether an atomic commit is stuck waiting on
the gpu (atomic_t counting the pending i915_sw_fence used by the
atomic modeset code should do it), so we can improve this.
But for now just start with something that is guaranteed to recover
faster, for much better CI througput.
This defacto reverts TDR on these platforms, but there's not really a
single commit to specify as the sole offender.
v2: Add a debug message to explain what's going on. We can't DRM_ERROR
because that spams CI. And the timeout based fallback still prints a
DRM_ERROR, in case something goes wrong.
v3: Fix comment layout (Michel)
Fixes: 35d7ee502a49 ("drm/i915: Wait first for submission, before waiting for request completion") Fixes: fba8238be633 ("drm/i915: Perform a direct reset of the GPU from the waiter") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-1-daniel.vetter@ffwll.ch
Chris Wilson [Sat, 12 Aug 2017 15:27:24 +0000 (16:27 +0100)]
drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt
When switching between contexts using the aliasing_ppgtt, the VM is
shared. We don't need to reload the PD registers unless they are dirty.
Martin Peres reported an issue that looks like corruption between
Haswell context switches, bisecting to commit e259ef5f0629 ("drm/i915:
Rearrange switch_context to load the aliasing ppgtt on first use").
Switching between the same mm (the aliasing_ppgtt is used for all
contexts in this case) should be a nop, but appears to trigger some
side-effects in the context switch. However, as we know the switch
is redundant in this case, we can skip it and continue to ignore the
issue until somebody feels strong enough to investigate full-ppgtt on
gen7 again!
Except.. Martin was using full-ppgtt which is not supported as it
doesn't work correctly yet. So whilst the bisect did yield valuable
information about the failures, the fix should not have any user impact
under default settings, with the exception of a slightly lower
throughput on xcs as the VM would always be reloaded.
v2: Also remember to set the legacy_active_context following the switch
on xcs (commit 1d7c7389fc2e ("drm/i915: Unify active context tracking
between legacy/execlists/guc"))
Fixes: e259ef5f0629 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use") Fixes: 1d7c7389fc2e ("drm/i915: Unify active context tracking between legacy/execlists/guc") Reported-by: Martin Peres <martin.peres@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170812152724.6883-1-chris@chris-wilson.co.uk
Chris Wilson [Thu, 10 Aug 2017 09:40:36 +0000 (10:40 +0100)]
drm/i915: Add SW_SYNC to our recommend testing Kconfig
Since we do use the SW_SYNC in igt for validating dma-fence and
sync_file, and wish to expand usage to cover driver independent portions
of syncobj interaction, ensure SW_SYNC is included in our testing
Kconfig.
drm/i915: Return correct EDP voltage swing table for 0.85V
For 0.85V cnl_get_buf_trans_edp() returns the DP table, instead of EDP.
Use the correct table.
The error was pointed out by this clang warning:
drivers/gpu/drm/i915/intel_ddi.c:392:39: warning: variable
'cnl_ddi_translations_edp_0_85V' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = {
Daniel Vetter [Fri, 11 Aug 2017 07:23:27 +0000 (09:23 +0200)]
drm/i915/fbc: only update no_fbc_reason when active
In our snb farm in CI we have plenty of underruns, but not enough
stolen memory to enable fbc. Which means every time there's an
underrun the no_fbc_reason swichtes to something that makes
kms_frontbuffer_tracking fail instead of skip, adding massive amounts
of additional noise to igt test runs.
Make sure we don't try to disable fbc when it's off already.
v2: Squash in additional WARN_ON suggestion from Chris.
Rodrigo Vivi [Wed, 9 Aug 2017 20:07:02 +0000 (13:07 -0700)]
drm/i915/cnl: Add slice and subslice information to debugfs.
A missing part to EU slice power gating is the
debugfs interface. This patch actually should have been
squashed to the initial EU slice power gating one.
Paulo Zanoni [Wed, 9 Aug 2017 20:52:43 +0000 (13:52 -0700)]
drm/i915/gen10+: use the SKL code for reading WM latencies
Gen 10 should use the exact same code as Gen 9, so change the check to
take this into consideration, and also assume that future platforms
will run this code.
Also add a MISSING_CASE(), just in case we do something wrong, instead
of silently failing.
Rodrigo Vivi [Thu, 10 Aug 2017 14:50:43 +0000 (07:50 -0700)]
drm/i915: Avoid null dereference if mst_port is unset.
I'm not sure if this is really the case and I don't believe
this is the real fix for the bug mentioned here, but since
I don't see a reliable path when mst_port is set and when
mode_valid is requested I believe it is worth to have this
protection here.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102022 Cc: Elizabeth <elizabethx.de.la.torre.mena@intel.com> Cc: Stefan Assmann <sassmann@redhat.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170810145043.24047-1-rodrigo.vivi@intel.com
Chris Wilson [Thu, 10 Aug 2017 17:57:42 +0000 (18:57 +0100)]
drm/i915/perf: Drop lockdep assert for i915_oa_init_reg_state()
This is called from execlist context init which we need to be unlocked.
Commit 95c5c461d32f ("drm/i915/perf: Implement
I915_PERF_ADD/REMOVE_CONFIG interface") added a lockdep assert to this
path for unclear reasons, remove it again!
Fixes: 95c5c461d32f ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170810175743.25401-2-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com>
projects / kernel.git / log