Tom Rini [Fri, 8 Jul 2022 19:23:05 +0000 (15:23 -0400)]
requirements: Move to atomicwrites==1.4.1
As explained upstream:
https://github.com/untitaker/python-atomicwrites/issues/61 there is no
longer a 1.3.0 version but the API is unchanged. Move to 1.4.1.
efi_loader: image_loader: add a missing digest verification for signed PE image
At the last step of PE image authentication, an image's hash value must be
compared with a message digest stored as the content (of SpcPeImageData type)
of pkcs7's contentInfo.
In MS authenticode, pkcs7 should have data in its contentInfo field.
This data is tagged with SpcIndirectData type and, for a signed PE image,
provides a image's message digest as SpcPeImageData.
This parser is used in image authentication to parse the field and
retrieve a message digest.
Imported from linux v5.19-rc, crypto/asymmetric_keys/mscode*.
Checkpatch.pl generates tones of warnings, but those are not fixed
for the sake of maintainability (importing from another source).
Andre Przywara [Sat, 2 Jul 2022 00:45:10 +0000 (01:45 +0100)]
usb: host: ehci-generic: Fix error check
Commit b38a0ac9f2ee ("usb: host: ehci-generic: Make resets and clocks
optional") improved the error check to cover the reset property being
optional. However this was using the wrong error variable for the
check, so would now never fail.
Use the correct error variable for checking the result of
reset_get_bulk(), to actually report genuine errors.
Fixes: b38a0ac9f2ee ("usb: host: ehci-generic: Make resets and clocks optional") Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Paul Barbieri [Thu, 30 Jun 2022 11:02:04 +0000 (07:02 -0400)]
EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices
The requsted partition disk sector incorrectly has the parition start
sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks()
routine adds the diskobj->offset to the requested lba. When the device
is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
Takahiro Akashi suggested removing the offset field from the efi_disk_obj
structure since disk-uclass.c handles the partition start biasing. Device
types other than UCLASS_PARTITION set the diskobj->offset field to zero
which makes the field unnecessary. This change removes the offset field
from the structure and removes all references from the code which is
isolated to the lib/efi_loader/efi_disk.c module.
This change also adds a test for the EFI ReadBlocks() API in the EFI
selftest code. There is already a test for reading a FAT file. The new
test uses ReadBlocks() to read the same "disk" block and compare it to
the data read from the file system API.
Signed-Off-by: Paul Barbieri <plb365@gmail.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Joel Stanley [Mon, 20 Jun 2022 07:01:17 +0000 (16:31 +0930)]
image: fit: Use stack allocation macro
The documentation above the DEFINE_ALIGN_BUFFER says it's for use
outside functions, but we're inside one.
Instead use ALLOC_CACHE_ALIGN_BUFFER, the stack based macro, which also
includes the cache alignment.
Fixes: 4ec8564f5550 ("image: fit: Align hash output buffers") Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
MAINTAINERS: Add Dario and Michael as NAND maintainers
Both of us are working on NAND subsystem on several architectures and
we have boards and projects to improve the subsystem in uboot. The idea
is to guarantee quick feedback on patches sent on mailing list and most
of the time the possibilities to test them.
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Acked-by: Tom Rini <trini@konsulko.com>
All the source code of clk-mem-n5x.c and clk-n5x.c are from Intel,
update the license to use both GPL2.0 and BSD-3 Clause because this
copy of code may used for open source and internal project.
Signed-off-by: Teik Heng Chong <teik.heng.chong@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Paweł Anikiel [Fri, 17 Jun 2022 10:47:26 +0000 (12:47 +0200)]
socfpga: arria10: Allow dcache_enable before relocation
Before relocating to SDRAM, the ECC is initialized by clearing the
whole SDRAM. In order to speed this up, dcache_enable is used (see
sdram_init_ecc_bits).
Since commit 2e4fa5bed8a5 ("arm: cp15: update DACR value to activate
access control"), this no longer works, because running code in OCRAM
with the XN bit set causes a page fault. Override dram_bank_mmu_setup
to disable XN in the OCRAM and setup DRAM dcache before relocation.
Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Paweł Anikiel [Fri, 17 Jun 2022 10:47:25 +0000 (12:47 +0200)]
socfpga: arria10: Wait for fifo empty after writing bitstream
For some reason, on the Mercury+ AA1 module, calling
fpgamgr_wait_early_user_mode immediately after writing the peripheral
bitstream leaves the fpga in a broken state (ddr calibration hangs).
Adding a delay before the first sync word is written seems to fix this.
Inspecting the fpgamgr registers before and after the delay,
imgcfg_FifoEmpty is the only bit that changes. Waiting for this bit
(instead of a hardcoded delay) also fixes the issue.
Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Paweł Anikiel [Fri, 17 Jun 2022 10:47:24 +0000 (12:47 +0200)]
socfpga: arria10: Improve bitstream loading speed
Apply some optimizations to speed up bitstream loading
(both for full and split periph/core bitstreams):
* Change the size of the first fs read, so that all the subsequent
reads are aligned to a specific value (called MAX_FIRST_LOAD_SIZE).
This value was chosen so that in subsequent reads the fat fs driver
doesn't have to allocate a temporary buffer in get_contents
(assuming 8KiB clusters).
* Change the buffer size to a larger value when reading to ddr
(but not too large, because large transfers cause a stack overflow
in the dwmmc driver).
Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Paweł Anikiel [Fri, 17 Jun 2022 10:47:23 +0000 (12:47 +0200)]
socfpga: arria10: Replace delays with busy waiting in cm_full_cfg
Using udelay while the clocks aren't fully configured causes the timer
system to save the wrong clock rate. Use sdelay and wait_on_value
instead (the values used in these functions were found experimentally).
Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Paweł Anikiel [Fri, 17 Jun 2022 10:47:22 +0000 (12:47 +0200)]
sysreset: socfpga: Use parent device for reading base address
This driver is a child of the rstmgr driver, both of which share the
same devicetree node. As a result, passing the child's udevice pointer
to dev_read_addr_ptr results in a failure of reading the #address-cells
property. Use the parent udevice pointer instead.
Signed-off-by: Paweł Anikiel <pan@semihalf.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 1 Jul 2022 02:36:41 +0000 (22:36 -0400)]
Merge tag 'u-boot-rockchip-20220630' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Fix for rk3328 nonopi-r2s boot env;
- Fix for rk8xx pmic boot on power plug-in;
- Fix for tee.bin support in fit image;
- rk3288 board dts update or fix;
- Some rk3399 board fix;
mxs_nand_command() implementation assume that it's working with a
LP NAND, which is a common case nowadays and thus uses two bytes
for column address.
However this is wrong for NAND_CMD_READID and NAND_CMD_PARAM, which
expects only one byte of column address, even for LP NANDs.
This leads to ONFI detection problem with some NAND manufacturer (like
Winbond) but not with others (like Samsung and Spansion)
We fix this with a simple workaround to avoid the 2nd byte column address
for those two commands.
Also align the code with nand_base to support 16 bit devices.
Tested on an iMX6SX device with:
* Winbond W29N04GVSIAA
* Spansion S34ML04G100TF100
* Samsung K9F4G08U00
Tested on imx8mn device with:
* Windbond W29N04GV
Signed-off-by: Andrea Scian <andrea.scian@dave.eu> CC: Stefano Babic <sbabic@denx.de> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
Chris Morgan [Fri, 27 May 2022 18:18:20 +0000 (13:18 -0500)]
rockchip: Add option to prevent booting on power plug-in
For Rockchip boards with the all rk8xx series PMICs (excluding the
rk808), it is sometimes desirable to not boot whenever the device is
plugged in. An example would be for the Odroid Go Advance.
This provides a configurable option to check the PMIC says it was
powered because of a plug-in event. If the value is 1 and this option
is selected, the device shuts down shortly after printing a message
to console stating the reason why it's shutting down. Powering up the
board with the power button is not affected.
This patch parallels the work done in the following patch series:
https://lore.kernel.org/u-boot/20220121133732.2397273-1-andre.przywara@arm.com/
Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Chris Morgan [Fri, 27 May 2022 18:18:19 +0000 (13:18 -0500)]
power: pmic: rk8xx: Support sysreset shutdown method
Add support for sysreset shutdown for this PMIC. The values were pulled
from the various datasheets, but for now it has only been tested on
the rk817 (for an Odroid Go Advance).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jerome Forissier [Wed, 11 May 2022 15:35:14 +0000 (17:35 +0200)]
mach-rockchip: make_fit_atf.py: support OP-TEE tee.bin v1 format
This commit adds support for the OP-TEE 'tee.bin' v1 format for Rockchip
platforms.
Since OP-TEE 3.8.0, tee.bin contains meta-data in a proprietary format
in addition to the ELF data. They are essential information for proper
initialization of the TEE core, such as the size of the memory region
covered by the TEE or a compact representation of runtime relocation
data when ASLR is enabled.
With OP-TEE 3.8.0 onwards, 'tee.elf' MUST NOT be used and 'tee.bin'
MUST be used instead. Ignoring this recommendation can lead to crashes
as described in [3].
Johan Jonker [Fri, 29 Apr 2022 21:40:08 +0000 (23:40 +0200)]
arm: dts: rockchip: remove usb-phy fallback string for rk3188
With the conversion of rockchip-usb-phy.yaml a long time used fallback
string for rk3066a/rk3188 was added. The linux driver doesn't do much with
the GRF phy address range, however the u-boot driver rockchip_usb2_phy.c
does. The bits in GRF_UOC0_CON2 for rk3066a/rk3188 and rk3288 for example
don't match. Remove the usb-phy fallback string for rk3188
to prevent possible strange side effects.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Paweł Jarosz [Fri, 29 Apr 2022 21:40:05 +0000 (23:40 +0200)]
rockchip: usb: gadget: add rk3066 product id
Product id of rk3066 usb otg is 0x300a.
Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Johan Jonker [Wed, 20 Apr 2022 12:54:10 +0000 (14:54 +0200)]
rockchip: include: configs: remove unused configs for tag and size
The configs ROCKCHIP_CHIP_TAG and ROCKCHIP_MAX_INIT_SIZE were
originally added with rksd.c, rkspi.c and rkcommon.c in mind,
but are no longer in use and replaced by struct spl_info,
so remove unused configs for tag and size.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Miquel Raynal [Mon, 27 Jun 2022 10:20:03 +0000 (12:20 +0200)]
fs/squashfs: Use kcalloc when relevant
A crafted squashfs image could embed a huge number of empty metadata
blocks in order to make the amount of malloc()'d memory overflow and be
much smaller than expected. Because of this flaw, any random code
positioned at the right location in the squashfs image could be memcpy'd
from the squashfs structures into U-Boot code location while trying to
access the rearmost blocks, before being executed.
In order to prevent this vulnerability from being exploited in eg. a
secure boot environment, let's add a check over the amount of data
that is going to be allocated. Such a check could look like:
if (!elem_size || n > SIZE_MAX / elem_size)
return NULL;
The right way to do it would be to enhance the calloc() implementation
but this is quite an impacting change for such a small fix. Another
solution would be to add the check before the malloc call in the
squashfs implementation, but this does not look right. So for now, let's
use the kcalloc() compatibility function from Linux, which has this
check.
Nicolas Iooss [Fri, 10 Jun 2022 14:50:25 +0000 (14:50 +0000)]
i2c: fix stack buffer overflow vulnerability in i2c md command
When running "i2c md 0 0 80000100", the function do_i2c_md parses the
length into an unsigned int variable named length. The value is then
moved to a signed variable:
int nbytes = length;
#define DISP_LINE_LEN 16
int linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
ret = dm_i2c_read(dev, addr, linebuf, linebytes);
On systems where integers are 32 bits wide, 0x80000100 is a negative
value to "nbytes > DISP_LINE_LEN" is false and linebytes gets assigned
0x80000100 instead of 16.
The consequence is that the function which reads from the i2c device
(dm_i2c_read or i2c_read) is called with a 16-byte stack buffer to fill
but with a size parameter which is too large. In some cases, this could
trigger a crash. But with some i2c drivers, such as drivers/i2c/nx_i2c.c
(used with "nexell,s5pxx18-i2c" bus), the size is actually truncated to
a 16-bit integer. This is because function i2c_transfer expects an
unsigned short length. In such a case, an attacker who can control the
response of an i2c device can overwrite the return address of a function
and execute arbitrary code through Return-Oriented Programming.
Fix this issue by using unsigned integers types in do_i2c_md. While at
it, make also alen unsigned, as signed sizes can cause vulnerabilities
when people forgot to check that they can be negative.
Signed-off-by: Nicolas Iooss <nicolas.iooss+uboot@ledger.fr> Reviewed-by: Heiko Schocher <hs@denx.de>
Do DDR initialization using the procedural mx6_dram_cfg() instead of
programming the MMDC using a raw list of register/value pairs, this
solves some rare boot failures on specific "bad" modules.
Calibration values, DDR geometry are unchanged, memory timings are
updated according to the relevant memory datasheet, no changes on
the power consumption.
For IT temperature range SKUs CL is decreased from 8 to 7 and tFAW
value is increased, for commercial temperature range SKUs some
changes on ODT parameters.
This change was validated over a range of different apalis-imx6 SoM, on
the whole working temperature range with weeks of continuous testing.
Currently accessing the SD card on USDHC2 fails with:
=> mmc dev 1
Card did not respond to voltage select! : -110
This is due to the fact that UHS modes are enabled in the defconfig
and the devicetree, but the referenced LDO5 regulator (reg_nvcc_sd)
is not available to switch the data lines from 3.3V to 1.8V mode.
By enabling the regulator driver the vqmmc-supply is now available
and the SD card works also in high speed modes:
=> mmc dev 1
switch to partitions #0, OK
mmc1 is current device
Please note that the board has a GPIO connected to the SD_VSEL signal
of the PMIC. As the driver uses the LDO5CTRL_H register to set the
voltage, we need to make sure that this GPIO (GPIO01_IO4) is set to
a high level.
Frieder Schrempf [Mon, 27 Jun 2022 11:00:58 +0000 (13:00 +0200)]
pmic: pca9450: Add optional SD_VSEL GPIO for LDO5
LDO5 has two separate control registers. LDO5CTRL_L is used if the
input signal SD_VSEL is low and LDO5CTRL_H if it is high.
The current driver implementation only uses LDO5CTRL_H. To make this
work on boards that have SD_VSEL connected to a GPIO, we add support
for specifying an optional GPIO and setting it to high at probe time.
In the future we might also want to add support for boards that have
SD_VSEL set to a fixed low level. In this case we need to change the
driver to be able to use the LDO5CTRL_L register.
This is a port of the same change in the Linux kernel: 8c67a11bae88 ("regulator: pca9450: Add SD_VSEL GPIO for LDO5")
In case rtt_nom is set to 0 keep ODT disabled (MMDC MPODTCTRL = 0).
No changes required for DDR MR1 Rtt_Nom impedance register, 0 value is
already handled correctly.
No board is currently affected by this change (rtt_nom != 0 on all i.MX6
ddr3 boards), this will be used by a follow-up change.
Fixes: fe0f7f7842e1 ("mx6: add mmdc configuration for MX6Q/MX6DL") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Set CLK01 and CLK02 to 24MHz and enable it in CCM_CCOSR register.
This clock is used by both the audio codec (CLKO1) and by the CSI camera
(CLKO2) and is expected to be 24MHz.
Despite the wrong 16.5MHz there was no real issue because of the wrong
frequency since Linux reconfigures the clocks afterward, however this
was triggering an issue with noise coming from the SGTL5000 audio codec.
The problem is that the SGTL5000 does not have a reset pin and after it
is configured if the input MCLK clock is disabled it produces a constant
noise on its output, this was happening on software reboot.
Forcing the clock to be enabled in U-Boot prevent the problem by making
sure that the clock is always available, without this change as soon as
Linux was changing the clock tree (setting clk_out_sel=1 without setting
clko2_en=1) the noise would start till the actual clock was enabled
(clko2_en=1) during the SGTL5000 driver probe.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
Fixup thermal trips in Linux device tree according to SoC thermal
grade.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Tested-by: Adam Ford <aford173@gmail.com>
Tom Rini [Mon, 27 Jun 2022 01:06:08 +0000 (21:06 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
The main attraction are two regressions, plus a fix
for a long standing bug:
- Fix USB support on boards with a switched VBUS regulator.
- Fix failing boot due to env loading on boards without MMC (CHIP).
- Fix PSCI CPU_OFF operation on R40 boards.
The rest are smaller fixes, and the forgotten DT sync for sun4i boards.
qianfan Zhao [Sat, 14 May 2022 03:19:23 +0000 (11:19 +0800)]
sunxi: psci: Fix sunxi_power_switch on sun8i-r40 platform
linux system will die if we offline one of the cpu on R40 based board:
eg: echo 0 > /sys/devices/system/cpu/cpu3/online
The reason is that the R40 version of sunxi_cpu_set_power always passes
0 for the CPU number, so we turn off CPU0, regardless of what CPU the
CPU_OFF request came for.
Fix this by passing the proper CPU number, as there are proper power
clamp registers for every of the four cores.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Wed, 20 Apr 2022 22:15:39 +0000 (23:15 +0100)]
sunxi: fix initial environment loading without MMC
Commit b065c620c59a ("sunxi: use boot source for determining environment
location") changed our implementation of env_get_location() and enabled
it for every board, even those without MMC support (like the C.H.I.P.
boards). However the default fallback location of ENVL_FAT requires MMC
support compiled in, so the board hangs when trying to initially load
the environment.
Change the algorithm to only return configured environment locations,
and improve the fallback algorithm on the way.
The env_init() routine calling this function here does not behave well
if the return value is ENVL_UNKNOWN on the very first call: it will make
U-Boot proper silently hang very early.
Work around this issue by making sure we return some configured (dummy)
environment location when prio is 0. This for instance happens when
booting via FEL.
This fixes U-Boot loading on the C.H.I.P. boards.
Fixes: b065c620c59a ("sunxi: use boot source for determining environment location") Reported-by: Chris Morgan <macroalpha82@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org>
[Andre: fix FEL boot case by not returning ENVL_UNKNOWN when prio==0] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Sun, 1 May 2022 03:38:36 +0000 (22:38 -0500)]
clk: sunxi: Add additional RTC compatible strings
Compatible strings for some new RTC hardware variants were added to
the binding. Add them to the driver in preparation for supporting
those new SoCs.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Wed, 11 May 2022 00:03:34 +0000 (19:03 -0500)]
gpio: sunxi: Fix build with CONFIG_SPL_SERIAL=n
This driver uses simple_strtol(), so it needs SPL_STRTO. Before commit 62bcde047894f ("disk: Add an option for partitions in SPL"), SPL_STRTO
was always selected indirectly. Now it is not, so select it here.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Samuel Holland [Thu, 26 May 2022 03:26:02 +0000 (22:26 -0500)]
ARM: dts: sun4i: Sync from Linux v5.18-rc1
Copy the devicetree source for the A10 SoC and all existing boards
verbatim from the Linux v5.18-rc1 tag.
The previous version of this change was only partially applied.
Fixes: 03d3a136a774 ("ARM: dts: sun4i: Sync from Linux v5.18-rc1") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Andre Przywara [Tue, 7 Jun 2022 22:36:18 +0000 (23:36 +0100)]
sunxi: usb: convert PHY GPIO functions to DM
The Allwinner USB PHY driver is still using the legacy GPIO interface,
which is now implemented by the DM_GPIO compat functions.
Those seem to have some design flaws, as setting the direction, then
later setting the value will not work, if the DM_GPIO driver is
implementing set_flags.
Fix this by using the dm_ version of the direct GPIO interface, which
uses struct gpio_desc structs to handle requested GPIOs, and actually
keeps the flags we set earlier.
This fixes USB operation on boards which need to toggle the VBUS supply
via a GPIO, like the Teres-I laptop or the BananaPi M2 Berry board.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reported-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Samuel Holland <samuel@sholland.org>
Tom Rini [Sat, 25 Jun 2022 12:38:00 +0000 (08:38 -0400)]
Merge tag 'video-20220625' of https://source.denx.de/u-boot/custodians/u-boot-video
- fix building sandbox with NO_SDL=1
- fix stb TrueType to check return value of STBTT_malloc()
- remove not required DM_REGULATOR test in stm32 dsi driver
Patrick Delaunay [Mon, 20 Jun 2022 09:55:07 +0000 (11:55 +0200)]
video: stm32: remove test on CONFIG_DM_REGULATOR
The tests on CONFIG_DM_REGULATOR, added to avoid compilation issues, can
now be removed, they are no more needed since the commit 8b4a43deb9b0
("power: regulator: add dummy helper").
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Building the sandbox with NO_SDL=1 resulted in an undefined reference to
'sandbox_sdl_remove_display'. Resolve this by adding a stub
implementation to match the stubs of the other similar functions.
Signed-off-by: Andrew Scull <ascull@google.com> Cc: Simon Glass <sjg@chromium.org> Cc: Anatolij Gustschin <agust@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Janne Grunau [Tue, 14 Jun 2022 07:09:09 +0000 (09:09 +0200)]
arm: apple: Increase RTKit timeouts
Timeouts are not expected to happen and are handled as fatal errors.
Increase all timeouts to 1 second as defensive measure to avoid relying
on the timing behaviour of certain firmware versions or configurations.
Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Mark Kettenis <kettenis@openbsd.org>
Janne Grunau [Tue, 14 Jun 2022 07:09:07 +0000 (09:09 +0200)]
arm: apple: nvme: Add SART support and RTKit buffer management
The NVMe firmware in the macOS 13 beta blocks or crashes with u-boot's
current minimal RTKit implementation. It does not provide buffers for
the firmware's buffer requests. The ANS2 firmware included in macOS 11
and 12 tolerates this. The firmware included in the first macOS 13 beta
requires buffers for the crashlog and ioreport endpoints to function.
In the case of the NVMe the buffers are physical memory. Access to
physical memory is guarded by what Apple calls SART.
Import m1n1's SART driver (exclusively used for the NVMe controller).
Implement buffer management helpers for RTKit. These are generic since
other devices (none in u-boot so far) require different handling.
Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Mark Kettenis <kettenis@openbsd.org>
If CONFIG_VIDEO_DM=n we query the display size from the serial console.
Especially when using a remote console the response can be so late that
it interferes with autoboot.
Only query the console size when running an EFI binary.
Add debug output showing the determined console size.
Reported-by: Fabio Estevam <festevam@gmail.com> Fixes: 585e1519a1e8 ("efi_loader: split efi_init_obj_list() into two stages") Fixes: 3da94f1971c7 ("efi_loader: disk: a helper function to create efi_disk objects from udevice") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Tested-by: Fabio Estevam <festevam@denx.de> Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
When the UEFI sub-system is initialized it sends an escape sequence to the
serial console to determine the terminal size. This stops the
run_command_list() function of the console emulation from recognizing the
U-Boot command line prompt.
Add a 'print -e' command as first command in the command list to work
around this issue.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Dinesh Maniyam [Wed, 1 Jun 2022 07:57:25 +0000 (15:57 +0800)]
drivers: cache: ncore: Disable snoop filter
There is hardware bug in NCORE CCU IP and it is causing an issue in the
coherent directory tracking of outstanding cache lines.
The workaround is disabling snoop filter.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Wed, 1 Jun 2022 07:54:59 +0000 (15:54 +0800)]
arch: arm: socfpga: timer_s10: Override udelay for secure section
Override __udelay() as 'always inlined' function so that PSCI code
run in '__secure' section can call this delay function as well.
Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com> Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Marek Vasut [Mon, 13 Jun 2022 09:55:21 +0000 (11:55 +0200)]
ARM: dts: stm32: Add DHCOR based DRC Compact board
Add DT for DH DRC Compact unit, which is a universal controller device.
The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD
card slot, eMMC and SDIO Wi-Fi.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
projects / uboot.git / log