Taehee Yoo [Wed, 4 May 2022 12:32:27 +0000 (12:32 +0000)]
net: sfc: fix memory leak due to ptp channel
It fixes memory leak in ring buffer change logic.
When ring buffer size is changed(ethtool -G eth0 rx 4096), sfc driver
works like below.
1. stop all channels and remove ring buffers.
2. allocates new buffer array.
3. allocates rx buffers.
4. start channels.
While the above steps are working, it skips some steps if the channel
doesn't have a ->copy callback function.
Due to ptp channel doesn't have ->copy callback, these above steps are
skipped for ptp channel.
It eventually makes some problems.
a. ptp channel's ring buffer size is not changed, it works only
1024(default).
b. memory leak.
The reason for memory leak is to use the wrong ring buffer values.
There are some values, which is related to ring buffer size.
a. efx->rxq_entries
- This is global value of rx queue size.
b. rx_queue->ptr_mask
- used for access ring buffer as circular ring.
- roundup_pow_of_two(efx->rxq_entries) - 1
c. rx_queue->max_fill
- efx->rxq_entries - EFX_RXD_HEAD_ROOM
These all values should be based on ring buffer size consistently.
But ptp channel's values are not.
a. efx->rxq_entries
- This is global(for sfc) value, always new ring buffer size.
b. rx_queue->ptr_mask
- This is always 1023(default).
c. rx_queue->max_fill
- This is new ring buffer size - EFX_RXD_HEAD_ROOM.
sfc driver allocates rx ring buffers based on these values.
When it allocates ptp channel's ring buffer, 4086 ring buffers are
allocated then, these buffers are attached to the allocated array.
But ptp channel's ring buffer array size is still 1024(default)
and ptr_mask is still 1023 too.
So, 3062 ring buffers will be overwritten to the array.
This is the reason for memory leak.
Test commands:
ethtool -G <interface name> rx 4096
while :
do
ip link set <interface name> up
ip link set <interface name> down
done
In order to avoid this problem, it adds ->copy callback to ptp channel
type.
So that rx_queue->ptr_mask value will be updated correctly.
Fixes: 5ae19bcdc481 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Using min_t(int, ...) as a potential array index implies to the compiler
that negative offsets should be allowed. This is not the case, though.
Replace "int" with "unsigned int". Fixes the following warning exposed
under future CONFIG_FORTIFY_SOURCE improvements:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/rcupdate.h:29,
from include/linux/rculist.h:11,
from include/linux/pid.h:5,
from include/linux/sched.h:14,
from include/linux/delay.h:23,
from drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:35:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function 't4_get_raw_vpd_params':
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 29 and size [2147483648, 4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2796:9: note: in expansion of macro 'memcpy'
2796 | memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN));
| ^~~~~~
include/linux/fortify-string.h:46:33: warning: '__builtin_memcpy' pointer overflow between offset 0 and size [2147483648, 4294967295] [-Warray-bounds]
46 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:388:9: note: in expansion of macro '__underlying_memcpy'
388 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:433:26: note: in expansion of macro '__fortify_memcpy_chk'
433 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:2798:9: note: in expansion of macro 'memcpy'
2798 | memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN));
| ^~~~~~
Additionally remove needless cast from u8[] to char * in last strim()
call.
Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202205031926.FVP7epJM-lkp@intel.com Fixes: c4500a808e82 ("cxgb4: Search VPD with pci_vpd_find_ro_info_keyword()") Fixes: 71155f6d03dc ("cxgb4: Use pci_vpd_find_id_string() to find VPD ID string") Cc: Raju Rangoju <rajur@chelsio.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220505233101.1224230-1-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Thu, 5 May 2022 16:19:46 +0000 (09:19 -0700)]
netlink: do not reset transport header in netlink_recvmsg()
netlink_recvmsg() does not need to change transport header.
If transport header was needed, it should have been reset
by the producer (netlink_dump()), not the consumer(s).
The following trace probably happened when multiple threads
were using MSG_PEEK.
BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg
write to 0xffff88811e9f15b2 of 2 bytes by task 32012 on cpu 1:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
sock_recvmsg_nosec net/socket.c:948 [inline]
sock_recvmsg net/socket.c:966 [inline]
__sys_recvfrom+0x204/0x2c0 net/socket.c:2097
__do_sys_recvfrom net/socket.c:2115 [inline]
__se_sys_recvfrom net/socket.c:2111 [inline]
__x64_sys_recvfrom+0x74/0x90 net/socket.c:2111
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff88811e9f15b2 of 2 bytes by task 32005 on cpu 0:
skb_reset_transport_header include/linux/skbuff.h:2760 [inline]
netlink_recvmsg+0x1de/0x790 net/netlink/af_netlink.c:1978
____sys_recvmsg+0x162/0x2f0
___sys_recvmsg net/socket.c:2674 [inline]
__sys_recvmsg+0x209/0x3f0 net/socket.c:2704
__do_sys_recvmsg net/socket.c:2714 [inline]
__se_sys_recvmsg net/socket.c:2711 [inline]
__x64_sys_recvmsg+0x42/0x50 net/socket.c:2711
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffff -> 0x0000
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 32005 Comm: syz-executor.4 Not tainted 5.18.0-rc1-syzkaller-00328-ge1f700ebd6be-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
The metadata dst is leaked when ip_route_input_mc() updates the dst for
the skb. Commit 15f505466309 ("dst: Metadata destinations") correctly
handled dropping the dst in ip_route_input_slow() but missed the
multicast case which is handled by ip_route_input_mc(). Drop the dst in
ip_route_input_mc() avoiding the leak.
Fixes: 15f505466309 ("dst: Metadata destinations") Signed-off-by: Lokesh Dhoundiyal <lokesh.dhoundiyal@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220505020017.3111846-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 6 May 2022 02:15:20 +0000 (19:15 -0700)]
Merge branch 'ocelot-vcap-fixes'
Vladimir Oltean says:
====================
Ocelot VCAP fixes
Changes in v2:
fix the NPDs and UAFs caused by filter->trap_list in a more robust way
that actually does not introduce bugs of its own (1/5)
This series fixes issues found while running
tools/testing/selftests/net/forwarding/tc_actions.sh on the ocelot
switch:
- NULL pointer dereference when failing to offload a filter
- NULL pointer dereference after deleting a trap
- filters still having effect after being deleted
- dropped packets still being seen by software
- statistics counters showing double the amount of hits
- statistics counters showing inexistent hits
- invalid configurations not rejected
====================
(1) we add filter A using tc-flower
(2) we send a packet that matches it
(3) we read the filter's statistics to find a hit count of 1
(4) we add a second filter B with a higher preference than A, and A
moves one position to the right to make room in the TCAM for it
(5) we send another packet, and this matches the second filter B
(6) we read the filter statistics again.
When this happens, the hit count of filter A is 2 and of filter B is 1,
despite a single packet having matched each filter.
Furthermore, in an alternate history, reading the filter stats a second
time between steps (3) and (4) makes the hit count of filter A remain at
1 after step (6), as expected.
The reason why this happens has to do with the filter->stats.pkts field,
which is written to hardware through the call path below:
The primary role of filter->stats.pkts is to transport the filter hit
counters from the last readout all the way from vcap_entry_get() ->
ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats().
The reason why vcap_entry_set() writes it to hardware is so that the
counters (saturating and having a limited bit width) are cleared
after each user space readout.
The writing of filter->stats.pkts to hardware during the TCAM entry
movement procedure is an unintentional consequence of the code design,
because the hit count isn't up to date at this point.
So at step (4), when filter A is moved by ocelot_vcap_filter_add() to
make room for filter B, the hardware hit count is 0 (no packet matched
on it in the meantime), but filter->stats.pkts is 1, because the last
readout saw the earlier packet. The movement procedure programs the old
hit count back to hardware, so this creates the impression to user space
that more packets have been matched than they really were.
The bug can be seen when running the gact_drop_and_ok_test() from the
tc_actions.sh selftest.
Fix the issue by reading back the hit count to tmp->stats.pkts before
migrating the VCAP filter. Sure, this is a best-effort technique, since
the packets that hit the rule between vcap_entry_get() and
vcap_entry_set() won't be counted, but at least it allows the counters
to be reliably used for selftests where the traffic is under control.
The vcap_entry_get() name is a bit unintuitive, but it only reads back
the counter portion of the TCAM entry, not the entire entry.
The index from which we retrieve the counter is also a bit unintuitive
(i - 1 during add, i + 1 during del), but this is the way in which TCAM
entry movement works. The "entry index" isn't a stored integer for a
TCAM filter, instead it is dynamically computed by
ocelot_vcap_block_get_filter_index() based on the entry's position in
the &block->rules list. That position (as well as block->count) is
automatically updated by ocelot_vcap_filter_add_to_block() on add, and
by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter
index, and "i - 1" or "i + 1" respectively are the old addresses of that
TCAM entry (we only support installing/deleting one filter at a time).
Fixes: e774494faed6 ("net: mscc: ocelot: Add support for tcam") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once the CPU port was added to the destination port mask of a packet, it
can never be cleared, so even packets marked as dropped by the MASK_MODE
of a VCAP IS2 filter will still reach it. This is why we need the
OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software
stop seeing them.
We disallow policer rules from being put on any other chain than the one
for the first lookup, but we don't do this for "drop" rules, although we
should. This change is merely ascertaining that the rules dont't
(completely) work and letting the user know.
The blamed commit is the one that introduced the multi-chain architecture
in ocelot. Prior to that, we should have always offloaded the filters to
VCAP IS2 lookup 0, where they did work.
Fixes: c67a410d668d ("net: mscc: ocelot: create TCAM skeleton from tc filter chains") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 4 May 2022 23:55:01 +0000 (02:55 +0300)]
net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups
The VCAP IS2 TCAM is looked up twice per packet, and each filter can be
configured to only match during the first, second lookup, or both, or
none.
The blamed commit wrote the code for making VCAP IS2 filters match only
on the given lookup. But right below that code, there was another line
that explicitly made the lookup a "don't care", and this is overwriting
the lookup we've selected. So the code had no effect.
Some of the more noticeable effects of having filters match on both
lookups:
- in "tc -s filter show dev swp0 ingress", we see each packet matching a
VCAP IS2 filter counted twice. This throws off scripts such as
tools/testing/selftests/net/forwarding/tc_actions.sh and makes them
fail.
- a "tc-drop" action offloaded to VCAP IS2 needs a policer as well,
because once the CPU port becomes a member of the destination port
mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode
with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in
the action vector can only appear in the first lookup. What happens
when a filter matches both lookups is that the action vector is
combined, and this makes the POLICE_ENA bit ineffective, since the
last lookup in which it has appeared is the second one. In other
words, "tc-drop" actions do not drop packets for the CPU port, dropped
packets are still seen by software unless there was an FDB entry that
directed those packets to some other place different from the CPU.
The last bit used to work, because in the initial commit e774494faed6
("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST
field of the VCAP IS2 half key with a 1, not with a "don't care".
The change to "don't care" was made inadvertently by me in commit c40e60490576 ("net: mscc: ocelot: generalize existing code for VCAP"),
which I just realized, and which needs a separate fix from this one,
for "stable" kernels that lack the commit blamed below.
Fixes: 99dd6887059c ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 4 May 2022 23:55:00 +0000 (02:55 +0300)]
net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted
ocelot_vcap_filter_del() works by moving the next filters over the
current one, and then deleting the last filter by calling vcap_entry_set()
with a del_filter which was specially created by memsetting its memory
to zeroes. vcap_entry_set() then programs this to the TCAM and action
RAM via the cache registers.
The problem is that vcap_entry_set() is a dispatch function which looks
at del_filter->block_id. But since del_filter is zeroized memory, the
block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do
is delete the entry at the same TCAM index from VCAP ES0 instead of IS1
or IS2.
The code was not always like this. vcap_entry_set() used to simply be
is2_entry_set(), and then, the logic used to work.
Restore the functionality by populating the block_id of the del_filter
based on the VCAP block of the filter that we're deleting. This makes
vcap_entry_set() know what to do.
Fixes: c67a410d668d ("net: mscc: ocelot: create TCAM skeleton from tc filter chains") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Wed, 4 May 2022 23:54:59 +0000 (02:54 +0300)]
net: mscc: ocelot: mark traps with a bool instead of keeping them in a list
Since the blamed commit, VCAP filters can appear on more than one list.
If their action is "trap", they are chained on ocelot->traps via
filter->trap_list. This is in addition to their normal placement on the
VCAP block->rules list head.
Therefore, when we free a VCAP filter, we must remove it from all lists
it is a member of, including ocelot->traps.
There are at least 2 bugs which are direct consequences of this design
decision.
First is the incorrect usage of list_empty(), meant to denote whether
"filter" is chained into ocelot->traps via filter->trap_list.
This does not do the correct thing, because list_empty() checks whether
"head->next == head", but in our case, head->next == head->prev == NULL.
So we dereference NULL pointers and die when we call list_del().
Second is the fact that not all places that should remove the filter
from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(),
which is where we have the main kfree(filter). By keeping freed filters
in ocelot->traps we end up in a use-after-free in
felix_update_trapping_destinations().
Attempting to fix all the buggy patterns is a whack-a-mole game which
makes the driver unmaintainable. Actually this is what the previous
patch version attempted to do:
https://patchwork.kernel.org/project/netdevbpf/patch/20220503115728.834457-3-vladimir.oltean@nxp.com/
but it introduced another set of bugs, because there are other places in
which create VCAP filters, not just ocelot_vcap_filter_create():
Relying on the convention that all those code paths must call
INIT_LIST_HEAD(&filter->trap_list) is not going to scale.
So let's do what should have been done in the first place and keep a
bool in struct ocelot_vcap_filter which denotes whether we are looking
at a trapping rule or not. Iterating now happens over the main VCAP IS2
block->rules. The advantage is that we no longer risk having stale
references to a freed filter, since it is only present in that list.
Fixes: 18824e2e24ca ("net: mscc: ocelot: keep traps in a list") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MAINTAINERS: add missing files for bonding definition
The bonding entry did not include additional include files that have
been added nor did it reference the documentation. Add these references
for completeness.
Tariq Toukan [Wed, 4 May 2022 08:09:14 +0000 (11:09 +0300)]
net: Fix features skip in for_each_netdev_feature()
The find_next_netdev_feature() macro gets the "remaining length",
not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips
the adjacent bit. Pass "bit" instead.
Fixes: 29e4eb97db49 ("net: Fix for_each_netdev_feature on Big endian") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20220504080914.1918-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolas Dichtel [Wed, 4 May 2022 09:07:39 +0000 (11:07 +0200)]
selftests: add ping test with ping_group_range tuned
The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.
Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nicolas Dichtel [Wed, 4 May 2022 09:07:38 +0000 (11:07 +0200)]
ping: fix address binding wrt vrf
When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.
Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0 2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address
CC: stable@vger.kernel.org Fixes: d92ce66074ea ("net: Introduce L3 Master device abstraction") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fabio Estevam [Wed, 4 May 2022 14:31:03 +0000 (11:31 -0300)]
net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061
Since commit 1b39787326f7 ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:
# udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = f73cef4e
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...
The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.
This causes the NULL pointer dereference inside kszphy_config_reset().
Fix the problem by using the generic suspend/resume functions as before.
Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.
Cc: stable@vger.kernel.org Fixes: 1b39787326f7 ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220504143104.1286960-1-festevam@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tetsuo Handa [Thu, 5 May 2022 01:53:53 +0000 (10:53 +0900)]
net: rds: use maybe_get_net() when acquiring refcount on TCP sockets
Eric Dumazet is reporting addition on 0 problem at rds_tcp_tune(), for
delayed works queued in rds_wq might be invoked after a net namespace's
refcount already reached 0.
Since rds_tcp_exit_net() from cleanup_net() calls flush_workqueue(rds_wq),
it is guaranteed that we can instead use maybe_get_net() from delayed work
functions until rds_tcp_exit_net() returns.
Note that I'm not convinced that all works which might access a net
namespace are already queued in rds_wq by the moment rds_tcp_exit_net()
calls flush_workqueue(rds_wq). If some race is there, rds_tcp_exit_net()
will fail to wait for work functions, and kmem_cache_free() could be
called from net_free() before maybe_get_net() is called from
rds_tcp_tune().
Reported-by: Eric Dumazet <edumazet@google.com> Fixes: 14380120831495f0 ("net: rds: acquire refcount on TCP sockets") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/41d09faf-bc78-1a87-dfd1-c6d1b5984b61@I-love.SAKURA.ne.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 5 May 2022 16:45:12 +0000 (09:45 -0700)]
Merge tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, rxrpc and wireguard.
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability"
* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
NFC: netlink: fix sleep in atomic bug when firmware download timeout
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: resalt the secret every 10 seconds
tcp: use different parts of the port_offset for index and offset
secure_seq: use the 64 bits of the siphash for port offset calculation
wireguard: selftests: set panic_on_warn=1 from cmdline
wireguard: selftests: bump package deps
wireguard: selftests: restore support for ccache
wireguard: selftests: use newer toolchains to fill out architectures
wireguard: selftests: limit parallelism to $(nproc) tests at once
wireguard: selftests: make routing loop test non-fatal
net/mlx5: Fix matching on inner TTC
net/mlx5: Avoid double clear or set of sync reset requested
net/mlx5: Fix deadlock in sync reset flow
net/mlx5e: Fix trust state reset in reload
net/mlx5e: Avoid checking offload capability in post_parse action
...
Duoming Zhou [Wed, 4 May 2022 05:58:47 +0000 (13:58 +0800)]
NFC: netlink: fix sleep in atomic bug when firmware download timeout
There are sleep in atomic bug that could cause kernel panic during
firmware download process. The root cause is that nlmsg_new with
GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer
handler. The call trace is shown below:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
Call Trace:
kmem_cache_alloc_node
__alloc_skb
nfc_genl_fw_download_done
call_timer_fn
__run_timers.part.0
run_timer_softirq
__do_softirq
...
The nlmsg_new with GFP_KERNEL parameter may sleep during memory
allocation process, and the timer handler is run as the result of
a "software interrupt" that should not call any other function
that could sleep.
This patch changes allocation mode of netlink message from GFP_KERNEL
to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.
Fixes: 38c8c679fb78 ("NFC: Add firmware upload netlink command") Fixes: 60ec4b069e14 ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Vladimir Oltean [Tue, 3 May 2022 12:14:28 +0000 (15:14 +0300)]
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/
the default conform-exceed action is "reclassify", for a reason we don't
really understand.
The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.
Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.
Fixes: 02e198d4c961 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
insufficient TCP source port randomness
In a not-yet published paper, Moshe Kol, Amit Klein, and Yossi Gilad
report being able to accurately identify a client by forcing it to emit
only 40 times more connections than the number of entries in the
table_perturb[] table, which is indexed by hashing the connection tuple.
The current 2^8 setting allows them to perform that attack with only 10k
connections, which is not hard to achieve in a few seconds.
Eric, Amit and I have been working on this for a few weeks now imagining,
testing and eliminating a number of approaches that Amit and his team were
still able to break or that were found to be too risky or too expensive,
and ended up with the simple improvements in this series that resists to
the attack, doesn't degrade the performance, and preserves a reliable port
selection algorithm to avoid connection failures, including the odd/even
port selection preference that allows bind() to always find a port quickly
even under strong connect() stress.
The approach relies on several factors:
- resalting the hash secret that's used to choose the table_perturb[]
entry every 10 seconds to eliminate slow attacks and force the
attacker to forget everything that was learned after this delay.
This already eliminates most of the problem because if a client
stays silent for more than 10 seconds there's no link between the
previous and the next patterns, and 10s isn't yet frequent enough
to cause too frequent repetition of a same port that may induce a
connection failure ;
- adding small random increments to the source port. Previously, a
random 0 or 1 was added every 16 ports. Now a random 0 to 7 is
added after each port. This means that with the default 32768-60999
range, a worst case rollover happens after 1764 connections, and
an average of 3137. This doesn't stop statistical attacks but
requires significantly more iterations of the same attack to
confirm a guess.
- increasing the table_perturb[] size from 2^8 to 2^16, which Amit
says will require 2.6 million connections to be attacked with the
changes above, making it pointless to get a fingerprint that will
only last 10 seconds. Due to the size, the table was made dynamic.
- a few minor improvements on the bits used from the hash, to eliminate
some unfortunate correlations that may possibly have been exploited
to design future attack models.
These changes were tested under the most extreme conditions, up to
1.1 million connections per second to one and a few targets, showing no
performance regression, and only 2 connection failures within 13 billion,
which is less than 2^-32 and perfectly within usual values.
The series is split into small reviewable changes and was already reviewed
by Amit and Eric.
====================
Willy Tarreau [Mon, 2 May 2022 08:46:14 +0000 (10:46 +0200)]
tcp: drop the hash_32() part from the index calculation
In commit 57c2c1517858 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.
Suggested-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:13 +0000 (10:46 +0200)]
tcp: increase source port perturb table to 2^16
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.
Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.
A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:12 +0000 (10:46 +0200)]
tcp: dynamically allocate the perturb table used by source ports
We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:11 +0000 (10:46 +0200)]
tcp: add small random increments to the source port
Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.
With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 2 May 2022 08:46:10 +0000 (10:46 +0200)]
tcp: resalt the secret every 10 seconds
In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:09 +0000 (10:46 +0200)]
tcp: use different parts of the port_offset for index and offset
Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.
Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:08 +0000 (10:46 +0200)]
secure_seq: use the 64 bits of the siphash for port offset calculation
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit da0a74156e20 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 May 2022 00:50:00 +0000 (17:50 -0700)]
Merge branch 'wireguard-patches-for-5-18-rc6'
Jason A. Donenfeld says:
====================
wireguard patches for 5.18-rc6
In working on some other problems, I wound up leaning on the WireGuard
CI more than usual and uncovered a few small issues with reliability.
These are fairly low key changes, since they don't impact kernel code
itself.
One change does stick out in particular, though, which is the "make
routing loop test non-fatal" commit. I'm not thrilled about doing this,
but currently [1] remains unsolved, and I'm still working on a real
solution to that (hopefully for 5.19 or 5.20 if I can come up with a
good idea...), so for now that test just prints a big red warning
instead.
wireguard: selftests: set panic_on_warn=1 from cmdline
Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: selftests: use newer toolchains to fill out architectures
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.
Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: selftests: limit parallelism to $(nproc) tests at once
The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: selftests: make routing loop test non-fatal
I hate to do this, but I still do not have a good solution to actually
fix this bug across architectures. So just disable it for now, so that
the CI can still deliver actionable results. This commit adds a large
red warning, so that at least the failure isn't lost forever, and
hopefully this can be revisited down the line.
Linus Torvalds [Wed, 4 May 2022 18:04:52 +0000 (11:04 -0700)]
Merge tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"IOMMU core:
- Fix for a regression which could cause NULL-ptr dereferences
Arm SMMU:
- Fix off-by-one in SMMUv3 SVA TLB invalidation
- Disable large mappings to workaround nvidia erratum
Intel VT-d:
- Handle PCI stop marker messages in IOMMU driver to meet the
requirement of I/O page fault handling framework.
- Calculate a feasible mask for non-aligned page-selective IOTLB
invalidation.
Apple DART IOMMU:
- Fix potential NULL-ptr dereference
- Set module owner"
* tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Make sysfs robust for non-API groups
iommu/dart: Add missing module owner to ops structure
iommu/dart: check return value after calling platform_get_resource()
iommu/vt-d: Drop stop marker messages
iommu/vt-d: Calculate mask for non-aligned flushes
iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu
iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
Linus Torvalds [Wed, 4 May 2022 18:01:31 +0000 (11:01 -0700)]
Merge tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Fix some issues that were reported.
This has been in for-next for a bit (longer than the times would
indicate, I had to rebase to add some text to the headers) and these
are fixes that need to go in"
* tag 'for-linus-5.17-2' of https://github.com/cminyard/linux-ipmi:
ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi()
ipmi: When handling send message responses, don't process the message
Robin Murphy [Wed, 4 May 2022 12:39:58 +0000 (13:39 +0100)]
iommu: Make sysfs robust for non-API groups
Groups created by VFIO backends outside the core IOMMU API should never
be passed directly into the API itself, however they still expose their
standard sysfs attributes, so we can still stumble across them that way.
Take care to consider those cases before jumping into our normal
assumptions of a fully-initialised core API group.
Fixes: 8bec16b5b7cf ("iommu: Use right way to retrieve iommu_ops") Reported-by: Jan Stancek <jstancek@redhat.com> Tested-by: Jan Stancek <jstancek@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/86ada41986988511a8424e84746dfe9ba7f87573.1651667683.git.robin.murphy@arm.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Mark Bloch [Sun, 10 Apr 2022 11:58:05 +0000 (11:58 +0000)]
net/mlx5: Fix matching on inner TTC
The cited commits didn't use proper matching on inner TTC
as a result distribution of encapsulated packets wasn't symmetric
between the physical ports.
Fixes: 4fd144517665 ("net/mlx5: Support partial TTC rules") Fixes: 0ba4206bed6d ("net/mlx5: Lag, add support to create TTC tables for LAG port selection") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
net/mlx5: Avoid double clear or set of sync reset requested
Double clear of reset requested state can lead to NULL pointer as it
will try to delete the timer twice. This can happen for example on a
race between abort from FW and pci error or reset. Avoid such case using
test_and_clear_bit() to verify only one time reset requested state clear
flow. Similarly use test_and_set_bit() to verify only one time reset
requested state set flow.
The sync reset flow can lead to the following deadlock when
poll_sync_reset() is called by timer softirq and waiting on
del_timer_sync() for the same timer. Fix that by moving the part of the
flow that waits for the timer to reset_reload_work.
Moshe Tal [Wed, 9 Feb 2022 17:23:56 +0000 (19:23 +0200)]
net/mlx5e: Fix trust state reset in reload
Setting dscp2prio during the driver reload can cause dcb ieee app list to
be not empty after the reload finish and as a result to a conflict between
the priority trust state reported by the app and the state in the device
register.
Reset the dcb ieee app list on initialization in case this is
conflicting with the register status.
Fixes: 2b6461a286b7 ("net/mlx5e: Add dcbnl dscp to priority support") Signed-off-by: Moshe Tal <moshet@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Ariel Levkovich [Mon, 28 Mar 2022 15:29:13 +0000 (18:29 +0300)]
net/mlx5e: Avoid checking offload capability in post_parse action
During TC action parsing, the can_offload callback is called
before calling the action's main parsing callback.
Later on, the can_offload callback is called again before handling
the action's post_parse callback if exists.
Since the main parsing callback might have changed and set parsing
params for the rule, following can_offload checks might fail because
some parsing params were already set.
Specifically, the ct action main parsing sets the ct param in the
parsing status structure and when the second can_offload for ct action
is called, before handling the ct post parsing, it will return an error
since it checks this ct param to indicate multiple ct actions which are
not supported.
Therefore, the can_offload call is removed from the post parsing
handling to prevent such cases.
This is allowed since the first can_offload call will ensure that the
action can be offloaded and the fact the code reached the post parsing
handling already means that the action can be offloaded.
Fixes: 558d26605c41 ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Paul Blakey [Tue, 29 Mar 2022 14:42:46 +0000 (17:42 +0300)]
net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release
__mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT,
if that is the last reference to that tuple, the actual deletion of
the tuple can happen after the FT is already destroyed and freed.
Flush the used workqueue before destroying the ct FT.
Fixes: d851e6aad647 ("net/mlx5e: CT: manage the lifetime of the ct entry object") Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
net/mlx5e: TC, fix decap fallback to uplink when int port not supported
When resolving the decap route device for a tunnel decap rule,
the result may be an OVS internal port device.
Prior to adding the support for internal port offload, such case
would result in using the uplink as the default decap route device
which allowed devices that can't support internal port offload
to offload this decap rule.
This behavior got broken by adding the internal port offload which
will fail in case the device can't support internal port offload.
To restore the old behavior, use the uplink device as the decap
route as before when internal port offload is not supported.
Fixes: 9333d1c4f520 ("net/mlx5: Support internal port as decap route device") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
ct_clear action is translated to clearing reg_c metadata
which holds ct state and zone information using mod header
actions.
These actions are allocated during the actions parsing, as
part of the flow attributes main mod header action list.
If ct action exists in the rule, the flow's main mod header
is used only in the post action table rule, after the ct tables
which set the ct info in the reg_c as part of the ct actions.
Therefore, if the original rule has a ct_clear action followed
by a ct action, the ct action reg_c setting will be done first and
will be followed by the ct_clear resetting reg_c and overwriting
the ct info.
Fix this by moving the ct_clear mod header actions allocation from
the ct action parsing stage to the ct action post parsing stage where
it is already known if ct_clear is followed by a ct action.
In such case, we skip the mod header actions allocation for the ct
clear since the ct action will write to reg_c anyway after clearing it.
Fixes: 8209ae54d00b ("net/mlx5e: CT, Fix multiple allocations and memleak of mod acts") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
net/mlx5e: Lag, Don't skip fib events on current dst
Referenced change added check to skip updating fib when new fib instance
has same or lower priority. However, new fib instance can be an update on
same dst address as existing one even though the structure is another
instance that has different address. Ignoring events on such instances
causes multipath LAG state to not be correctly updated.
Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info
structure and don't skip events that have the same value of that fields.
Referenced change incorrectly sets single path fib_info even when LAG is
not active. Fix it by moving call to mlx5_lag_fib_set() into conditional
that verifies LAG state.
net/mlx5e: Lag, Fix use-after-free in fib event handler
Recent commit that modified fib route event handler to handle events
according to their priority introduced use-after-free[0] in mp->mfi pointer
usage. The pointer now is not just cached in order to be compared to
following fib_info instances, but is also dereferenced to obtain
fib_priority. However, since mlx5 lag code doesn't hold the reference to
fin_info during whole mp->mfi lifetime, it could be used after fib_info
instance has already been freed be kernel infrastructure code.
Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*'
type and cache fib_info priority in dedicated integer. Group
fib_info-related data into dedicated 'fib' structure that will be further
extended by following patches in the series.
[0]:
[ 203.588029] ==================================================================
[ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core]
[ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138
[ 203.681455] Memory state around the buggy address:
[ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.686701] ^
[ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 203.690620] ==================================================================
Fixes: bfbf1162b4c4 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Vlad Buslov [Mon, 28 Mar 2022 12:54:52 +0000 (15:54 +0300)]
net/mlx5e: Don't match double-vlan packets if cvlan is not set
Currently, match VLAN rule also matches packets that have multiple VLAN
headers. This behavior is similar to buggy flower classifier behavior that
has recently been fixed. Fix the issue by matching on
outer_second_cvlan_tag with value 0 which will cause the HW to verify the
packet doesn't contain second vlan header.
Aya Levin [Thu, 3 Mar 2022 17:02:03 +0000 (19:02 +0200)]
net/mlx5: Fix slab-out-of-bounds while reading resource dump menu
Resource dump menu may span over more than a single page, support it.
Otherwise, menu read may result in a memory access violation: reading
outside of the allocated page.
Note that page format of the first menu page contains menu headers while
the proceeding menu pages contain only records.
The KASAN logs are as follows:
BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0
Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496
CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x7d
print_address_description.constprop.0+0x1f/0x140
? strcmp+0x9b/0xb0
? strcmp+0x9b/0xb0
kasan_report.cold+0x83/0xdf
? strcmp+0x9b/0xb0
strcmp+0x9b/0xb0
mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core]
? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x286/0x400
? raw_spin_unlock_irqrestore+0x47/0x50
? aomic_notifier_chain_register+0x32/0x40
mlx5_load+0x104/0x2e0 [mlx5_core]
mlx5_init_one+0x41b/0x610 [mlx5_core]
....
The buggy address belongs to the object at ffff88812b2e0000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 4048 bytes to the right of
4096-byte region [ffff88812b2e0000, ffff88812b2e1000)
The buggy address belongs to the page:
page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0
head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 80000000000102000000000000000000dead000000000001ffff888100043040
raw: ffff88812b2e6000000000008004000000000001ffffffff0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address: ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 4ffbb8f16828 ("net/mlx5: Add support for resource dump") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Ariel Levkovich [Tue, 15 Mar 2022 16:20:48 +0000 (18:20 +0200)]
net/mlx5e: Fix wrong source vport matching on tunnel rule
When OVS internal port is the vtep device, the first decap
rule is matching on the internal port's vport metadata value
and then changes the metadata to be the uplink's value.
Therefore, following rules on the tunnel, in chain > 0, should
avoid matching on internal port metadata and use the uplink
vport metadata instead.
Select the uplink's metadata value for the source vport match
in case the rule is in chain greater than zero, even if the tunnel
route device is internal port.
Jakub Kicinski [Wed, 4 May 2022 00:41:35 +0000 (17:41 -0700)]
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says:
====================
bnxt_en: Bug fixes
This patch series includes 3 fixes:
- Fix an occasional VF open failure.
- Fix a PTP spinlock usage before initialization
- Fix unnecesary RX packet drops under high TX traffic load.
====================
Michael Chan [Tue, 3 May 2022 01:13:12 +0000 (21:13 -0400)]
bnxt_en: Fix unnecessary dropping of RX packets
In bnxt_poll_p5(), we first check cpr->has_more_work. If it is true,
we are in NAPI polling mode and we will call __bnxt_poll_cqs() to
continue polling. It is possible to exhanust the budget again when
__bnxt_poll_cqs() returns.
We then enter the main while loop to check for new entries in the NQ.
If we had previously exhausted the NAPI budget, we may call
__bnxt_poll_work() to process an RX entry with zero budget. This will
cause packets to be dropped unnecessarily, thinking that we are in the
netpoll path. Fix it by breaking out of the while loop if we need
to process an RX NQ entry with no budget left. We will then exit
NAPI and stay in polling mode.
Fixes: e58dbae51c92 ("bnxt_en: Process the NQ under NAPI continuous polling.") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan [Tue, 3 May 2022 01:13:11 +0000 (21:13 -0400)]
bnxt_en: Initiallize bp->ptp_lock first before using it
bnxt_ptp_init() calls bnxt_ptp_init_rtc() which will acquire the ptp_lock
spinlock. The spinlock is not initialized until later. Move the
bnxt_ptp_init_rtc() call after the spinlock is initialized.
Fixes: cf4f3ea09a66 ("bnxt_en: Add driver support to use Real Time Counter for PTP") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On older chips, RFS is capable if we can reserve the number of vnics that
is equal to RX rings + 1. But since RX rings is still set to 0 in this
code path, we may mistakenly think that RFS is supported for 0 RX rings.
Later, when the default RX rings are reserved and we try to enable
RFS, it would fail and cause bnxt_open() to fail unnecessarily.
We fix this in 2 places. bnxt_rfs_capable() will always return false if
RX rings is not yet set. bnxt_init_dflt_ring_mode() will call
bnxt_set_dflt_rfs() which will always clear the RFS flags if RFS is not
supported.
Fixes: 040e9790e63c ("bnxt_en: reliably allocate IRQ table on reset to avoid crash") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sergey Shtylyov [Mon, 2 May 2022 20:14:09 +0000 (23:14 +0300)]
smsc911x: allow using IRQ0
The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 2a97edde8eaa ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource. This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...
When merging this to the stable kernels, make sure you also merge commit b739b18b43e3 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...
Matthew Hagan [Mon, 2 May 2022 22:33:15 +0000 (23:33 +0100)]
net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT
As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.
This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.
Change from v1: removal of erroneous return statment (Andrew Lunn)
Linus Torvalds [Tue, 3 May 2022 22:47:19 +0000 (15:47 -0700)]
Merge tag 'seccomp-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp selftest fix from Kees Cook:
- Avoid using stdin for read syscall testing (Jann Horn)
* tag 'seccomp-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Don't call read() on TTY from background pgrp
Linus Torvalds [Tue, 3 May 2022 16:51:52 +0000 (09:51 -0700)]
Merge tag 'hwmon-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Work around a hardware problem in the delta-ahe50dc-fan driver
- Explicitly disable PEC in PMBus core if not enabled
- Fix negative temperature values in f71882fg driver
- Fix warning on removal of adt7470 driver
- Fix CROSSHAIR VI HERO name in asus_wmi_sensors driver
- Fix build warning seen in xdpe12284 driver if
CONFIG_SENSORS_XDPE122_REGULATOR is disabled
- Fix type of 'ti,n-factor' in ti,tmp421 driver bindings
* tag 'hwmon-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus) delta-ahe50dc-fan: work around hardware quirk
hwmon: (pmbus) disable PEC if not enabled
hwmon: (f71882fg) Fix negative temperature
dt-bindings: hwmon: ti,tmp421: Fix type for 'ti,n-factor'
hwmon: (adt7470) Fix warning on module removal
hwmon: (asus_wmi_sensors) Fix CROSSHAIR VI HERO name
hwmon: (xdpe12284) Fix build warning seen if CONFIG_SENSORS_XDPE122_REGULATOR is disabled
Tetsuo Handa [Mon, 2 May 2022 01:40:18 +0000 (10:40 +0900)]
net: rds: acquire refcount on TCP sockets
syzbot is reporting use-after-free read in tcp_retransmit_timer() [1],
for TCP socket used by RDS is accessing sock_net() without acquiring a
refcount on net namespace. Since TCP's retransmission can happen after
a process which created net namespace terminated, we need to explicitly
acquire a refcount.
Link: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed Reported-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com> Fixes: a3d12183ab9d79f5 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Fixes: b377f75f7390175f ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/a5fb1fc4-2284-3359-f6a0-e4e390239d7b@I-love.SAKURA.ne.jp Signed-off-by: Paolo Abeni <pabeni@redhat.com>
selftests/net: so_txtime: usage(): fix documentation of default clock
The program uses CLOCK_TAI as default clock since it was added to the
Linux repo. In commit:
| a1b37040eac9 ("selftests/net: so_txtime multi-host support")
a help text stating the wrong default clock was added.
This patch fixes the help text.
Fixes: a1b37040eac9 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <cmllamas@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220502094638.1921702-3-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
selftests/net: so_txtime: fix parsing of start time stamp on 32 bit systems
This patch fixes the parsing of the cmd line supplied start time on 32
bit systems. A "long" on 32 bit systems is only 32 bit wide and cannot
hold a timestamp in nano second resolution.
Fixes: a1b37040eac9 ("selftests/net: so_txtime multi-host support") Cc: Carlos Llamas <cmllamas@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20220502094638.1921702-2-mkl@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ido Schimmel [Mon, 2 May 2022 08:45:07 +0000 (11:45 +0300)]
selftests: mirror_gre_bridge_1q: Avoid changing PVID while interface is operational
In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.
When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.
Fix this by taking br1 down and bringing it back up when it is fully
configured.
With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).
Fixes: dbb90fdbbb27 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
emaclite: improve error handling and minor cleanup
This patchset does error handling for of_address_to_resource() and also
removes "Don't advertise 1000BASE-T" and auto negotiation.
Changes for v3:
- Resolve git apply conflicts for 2/2 patch.
Changes for v2:
- Added Andrew's reviewed by tag in 1/2 patch.
- Move ret to down to align with reverse xmas tree style in 2/2 patch.
- Also add fixes tag in 2/2 patch.
- Specify tree name in subject prefix.
====================
Shravya Kumbham [Mon, 2 May 2022 07:27:49 +0000 (12:57 +0530)]
net: emaclite: Don't advertise 1000BASE-T and do auto negotiation
In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Linus Torvalds [Mon, 2 May 2022 17:09:02 +0000 (10:09 -0700)]
Merge tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes mostly around how some file attributes could be set.
- fix handling of compression property:
- don't allow setting it on anything else than regular file or
directory
- do not allow setting it on nodatacow files via properties
- improved error handling when setting xattr
- make sure symlinks are always properly logged"
* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: skip compression property for anything other than files and dirs
btrfs: do not BUG_ON() on failure to update inode when setting xattr
btrfs: always log symlinks in full mode
btrfs: do not allow compression on nodatacow files
btrfs: export a helper for compression hard check
Linus Torvalds [Sun, 1 May 2022 18:49:32 +0000 (11:49 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
Linus Torvalds [Sun, 1 May 2022 17:03:36 +0000 (10:03 -0700)]
Merge tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
Convert B53 to use phylink_pcs for the serdes rather than hooking it
into the MAC-layer callbacks.
Fixes: 7a1dc7b18376 ("net: dsa: b53: mark as non-legacy") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 1 May 2022 16:34:54 +0000 (09:34 -0700)]
Merge tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"A bunch of objtool fixes to improve unwinding, sibling call detection,
fallthrough detection and relocation handling of weak symbols when the
toolchain strips section symbols"
* tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix code relocs vs weak symbols
objtool: Fix type of reloc::addend
objtool: Fix function fallthrough detection for vmlinux
objtool: Fix sibling call detection in alternatives
objtool: Don't set 'jump_dest' for sibling calls
x86/uaccess: Don't jump between functions
Linus Torvalds [Sun, 1 May 2022 16:30:47 +0000 (09:30 -0700)]
Merge tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Fix locking when accessing device MSI descriptors
* tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
Thomas Gleixner [Fri, 29 Apr 2022 13:54:24 +0000 (15:54 +0200)]
pci_irq_vector() can't be used in atomic context any longer. This conflicts
with the usage of this function in nic_mbx_intr_handler().
Cache the Linux interrupt numbers in struct nicpf and use that cache in the
interrupt handler to select the mailbox.
Fixes: e5ee73bc2ac1 ("genirq/msi: Convert to new functions") Reported-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2041772 Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 1 May 2022 12:26:05 +0000 (13:26 +0100)]
Merge branch 'nfc-fixes'
Duoming Zhou says:
====================
Replace improper checks and fix bugs in nfc subsystem
The first patch is used to replace improper checks in netlink related
functions of nfc core, the second patch is used to fix bugs in
nfcmrvl driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs
There are destructive operations such as nfcmrvl_fw_dnld_abort and
gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware,
gpio and so on could be destructed while the upper layer functions such as
nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads
to double-free, use-after-free and null-ptr-deref bugs.
There are three situations that could lead to double-free bugs.
The firmware struct is deallocated in position (1) and deallocated
in position (2) again.
The crash trace triggered by POC is like below:
BUG: KASAN: double-free or invalid-free in fw_dnld_over
Call Trace:
kfree
fw_dnld_over
nfcmrvl_nci_unregister_dev
nci_uart_tty_close
tty_ldisc_kill
tty_ldisc_hangup
__tty_hangup.part.0
tty_release
...
What's more, there are also use-after-free and null-ptr-deref bugs
in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or
set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev,
then, we dereference firmware, gpio or the members of priv->fw_dnld in
nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen.
This patch reorders destructive operations after nci_unregister_device
in order to synchronize between cleanup routine and firmware download
routine.
The nci_unregister_device is well synchronized. If the device is
detaching, the firmware download routine will goto error. If firmware
download routine is executing, nci_unregister_device will wait until
firmware download routine is finished.
Fixes: 3c8bc5e4f6bd ("NFC: nfcmrvl: add firmware download support") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
nfc: replace improper check device_is_registered() in netlink related functions
The device_is_registered() in nfc core is used to check whether
nfc device is registered in netlink related functions such as
nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered()
is protected by device_lock, there is still a race condition between
device_del() and device_is_registered(). The root cause is that
kobject_del() in device_del() is not protected by device_lock.
The device_is_registered() returns the value of state_in_sysfs and
the state_in_sysfs is set to zero in kobject_del(). If we pass check in
position (1), then set zero in position (2). As a result, the check
in position (1) is useless.
This patch uses bool variable instead of device_is_registered() to judge
whether the nfc device is registered, which is well synchronized.
Fixes: e6c88ea7ddf9 ("NFC: add nfc subsystem core") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Tan Tee Min [Fri, 29 Apr 2022 11:58:07 +0000 (19:58 +0800)]
net: stmmac: disable Split Header (SPH) for Intel platforms
Based on DesignWare Ethernet QoS datasheet, we are seeing the limitation
of Split Header (SPH) feature is not supported for Ipv4 fragmented packet.
This SPH limitation will cause ping failure when the packets size exceed
the MTU size. For example, the issue happens once the basic ping packet
size is larger than the configured MTU size and the data is lost inside
the fragmented packet, replaced by zeros/corrupted values, and leads to
ping fail.
So, disable the Split Header for Intel platforms.
v2: Add fixes tag in commit message.
Fixes: 3e4d2632676a("net: stmmac: Add Split Header support and enable it in XGMAC cores") Cc: <stable@vger.kernel.org> # 5.10.x Suggested-by: Ong, Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and kernfs fixes for some reported
problems. They include:
- kernfs regression that is causing oopses in 5.17 and newer releases
- topology sysfs fixes for a few small reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: fix NULL dereferencing in kernfs_remove
topology: Fix up build warning in topology_is_visible()
arch_topology: Do not set llc_sibling if llc_id is invalid
topology: make core_mask include at least cluster_siblings
topology/sysfs: Hide PPIN on systems that do not support it.
Merge tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.18-rc5 for some
reported issues and new quirks. They include:
- dwc3 driver fixes
- xhci driver fixes
- typec driver fixes
- new usb-serial driver ids
- added new USB devices to existing quirk tables
- other tiny fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: phy: generic: Get the vbus supply
usb: dwc3: gadget: Return proper request status
usb: dwc3: pci: add support for the Intel Meteor Lake-P
usb: dwc3: core: Only handle soft-reset in DCTL
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
usb: misc: eud: Fix an error handling path in eud_probe()
usb: core: Don't hold the device lock while sleeping in do_proc_control()
usb: dwc3: Try usb-role-switch first in dwc3_drd_init
usb: dwc3: core: Fix tx/rx threshold settings
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
xhci: Enable runtime PM on second Alderlake controller
usb: dwc3: fix backwards compat with rockchip devices
dt-bindings: usb: samsung,exynos-usb2: add missing required reg
usb: misc: fix improper handling of refcount in uss720_probe()
USB: Fix ehci infinite suspend-resume loop issue in zhaoxin
usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY
usb: typec: ucsi: Fix role swapping
usb: typec: ucsi: Fix reuse of completion structure
usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
...
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One fix for an endless error loop with the target driver affecting
tapes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data
Eric Dumazet [Fri, 29 Apr 2022 16:20:36 +0000 (09:20 -0700)]
mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()
Also ip6_mc_msfilter() needs to update the pointer
before releasing the mc_lock mutex.
Note that linux-5.13 was supporting kfree_rcu(NULL, rcu),
so this fix does not need the conditional test I was
forced to use in the equivalent patch for IPv4.
Fixes: 4be83f80ba12 ("mld: convert ipv6_mc_socklist->sflist to RCU") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 29 Apr 2022 15:42:57 +0000 (08:42 -0700)]
net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
syzbot reported an UAF in ip_mc_sf_allow() [1]
Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()
Because kfree_rcu(ptr, rcu) got support for NULL ptr
only recently in commit e5eff60b1ba2 ("rcu: Make kfree_rcu()
ignore NULL pointers"), I chose to use the conditional
to make sure stable backports won't miss this detail.
if (psl)
kfree_rcu(psl, rcu);
net/ipv6/mcast.c has similar issues, addressed in a separate patch.
[1]
BUG: KASAN: use-after-free in ip_mc_sf_allow+0x6bb/0x6d0 net/ipv4/igmp.c:2655
Read of size 4 at addr ffff88807d37b904 by task syz-executor.5/908
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38
__kasan_record_aux_stack+0x7e/0x90 mm/kasan/generic.c:348
call_rcu+0x99/0x790 kernel/rcu/tree.c:3074
mpls_dev_notify+0x552/0x8a0 net/mpls/af_mpls.c:1656
notifier_call_chain+0xb5/0x200 kernel/notifier.c:84
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1938
call_netdevice_notifiers_extack net/core/dev.c:1976 [inline]
call_netdevice_notifiers net/core/dev.c:1990 [inline]
unregister_netdevice_many+0x92e/0x1890 net/core/dev.c:10751
default_device_exit_batch+0x449/0x590 net/core/dev.c:11245
ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298
The buggy address belongs to the object at ffff88807d37b900
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 4 bytes inside of
64-byte region [ffff88807d37b900, ffff88807d37b940)
Memory state around the buggy address: ffff88807d37b800: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc ffff88807d37b880: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
>ffff88807d37b900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^ ffff88807d37b980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff88807d37ba00: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc
Fixes: a1e13353026b ("igmp: fix ip_mc_sf_allow race [v5]") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Flavio Leitner <fbl@sysclose.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Fri, 29 Apr 2022 20:05:16 +0000 (21:05 +0100)]
rxrpc: Enable IPv6 checksums on transport socket
AF_RXRPC doesn't currently enable IPv6 UDP Tx checksums on the transport
socket it opens and the checksums in the packets it generates end up 0.
It probably should also enable IPv6 UDP Rx checksums and IPv4 UDP
checksums. The latter only seem to be applied if the socket family is
AF_INET and don't seem to apply if it's AF_INET6. IPv4 packets from an
IPv6 socket seem to have checksums anyway.
What seems to have happened is that the inet_inv_convert_csum() call didn't
get converted to the appropriate udp_port_cfg parameters - and
udp_sock_create() disables checksums unless explicitly told not too.
Fix this by enabling the three udp_port_cfg checksum options.
Fixes: 6b5fc4c8f1df ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Vadim Fedorenko <vfedorenko@novek.ru>
cc: David S. Miller <davem@davemloft.net>
cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Fri, 29 Apr 2022 01:53:37 +0000 (09:53 +0800)]
net: cpsw: add missing of_node_put() in cpsw_probe_dt()
'tmp_node' need be put before returning from cpsw_probe_dt(),
so add missing of_node_put() in error path.
Fixes: baf8efc03bda ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Thu, 28 Apr 2022 09:53:17 +0000 (17:53 +0800)]
net: dsa: mt7530: add missing of_node_put() in mt7530_setup()
Add of_node_put() if of_get_phy_mode() fails in mt7530_setup()
Fixes: f809ceee21c6 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220428095317.538829-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: dsa: ksz9477: port mirror sniffing limited to one port
This patch limits the sniffing to only one port during the mirror add.
And during the mirror_del it checks for all the ports using the sniff,
if and only if no other ports are referring, sniffing is disabled.
The code is updated based on the review comments of LAN937x port mirror
patch.
Qiao Ma [Thu, 28 Apr 2022 12:30:16 +0000 (20:30 +0800)]
hinic: fix bug of wq out of bound access
If wq has only one page, we need to check wqe rolling over page by
compare end_idx and curr_idx, and then copy wqe to shadow wqe to
avoid out of bound access.
This work has been done in hinic_get_wqe, but missed for hinic_read_wqe.
This patch fixes it, and removes unnecessary MASKED_WQE_IDX().
====================
selftests: net: add missing tests to Makefile
When generating the selftests to another folder, the fixed tests are
missing as they are not in Makefile. The missing tests are generated
by command:
$ for f in $(ls *.sh); do grep -q $f Makefile || echo $f; done
====================
projects / kernel.git / log