After 65536 dynamic events have been added and removed, the "type" field
of the event then uses the first type number that is available (not
currently used by other events). A type number is the identifier of the
binary blobs in the tracing ring buffer (known as events) to map them to
logic that can parse the binary blob.
The issue is that if a dynamic event (like a kprobe event) is traced and
is in the ring buffer, and then that event is removed (because it is
dynamic, which means it can be created and destroyed), if another dynamic
event is created that has the same number that new event's logic on
parsing the binary blob will be used.
To show how this can be an issue, the following can crash the kernel:
# cd /sys/kernel/tracing
# for i in `seq 65536`; do
echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events
# done
For every iteration of the above, the writing to the kprobe_events will
remove the old event and create a new one (with the same format) and
increase the type number to the next available on until the type number
reaches over 65535 which is the max number for the 16 bit type. After it
reaches that number, the logic to allocate a new number simply looks for
the next available number. When an dynamic event is removed, that number
is then available to be reused by the next dynamic event created. That is,
once the above reaches the max number, the number assigned to the event in
that loop will remain the same.
Now that means deleting one dynamic event and created another will reuse
the previous events type number. This is where bad things can happen.
After the above loop finishes, the kprobes/foo event which reads the
do_sys_openat2 function call's first parameter as an integer.
==================================================================
BUG: KASAN: use-after-free in string+0xd4/0x1c0
Read of size 1 at addr ffff88805fdbbfa0 by task cat/2049
This was found when Zheng Yejian sent a patch to convert the event type
number assignment to use IDA, which gives the next available number, and
this bug showed up in the fuzz testing by Yujie Liu and the kernel test
robot. But after further analysis, I found that this behavior is the same
as when the event type numbers go past the 16bit max (and the above shows
that).
As modules have a similar issue, but is dealt with by setting a
"WAS_ENABLED" flag when a module event is enabled, and when the module is
freed, if any of its events were enabled, the ring buffer that holds that
event is also cleared, to prevent reading stale events. The same can be
done for dynamic events.
If any dynamic event that is being removed was enabled, then make sure the
buffers they were enabled in are now cleared.
Link: https://lkml.kernel.org/r/20221123171434.545706e3@gandalf.local.home Link: https://lore.kernel.org/all/20221110020319.1259291-1-zhengyejian1@huawei.com/ Cc: stable@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org>
Depends-on: e18eb8783ec49 ("tracing: Add tracing_reset_all_online_cpus_unlocked() function")
Depends-on: 61a65b731a172 ("tracing: Add unified dynamic event framework")
Depends-on: c73a44df034ec ("tracing/kprobes: Use dyn_event framework for kprobe events")
Depends-on: 3bdd8007326c4 ("tracing: Only have rmmod clear buffers that its events were active in")
Depends-on: ff90bdb91e099 ("tracing: Only clear trace buffer on module unload if event was traced") Fixes: d0a4c6683f147 ("tracing/kprobes: Rename Kprobe-tracer to kprobe-event") Reported-by: Zheng Yejian <zhengyejian1@huawei.com> Reported-by: Yujie Liu <yujie.liu@intel.com> Reported-by: kernel test robot <yujie.liu@intel.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the current logic the "failed to exit halt state" error would be
shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL
register, since the right hand side is always true. Fix this by using
the correct operator (bit-wise instead of logical AND) to only check for
the halt bit flag, which was obviously intended here.
Fixes: 4811146d0fe6 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE") Signed-off-by: Sebastian Falbesoner <sebastian.falbesoner@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD
introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely
included DISCARD too.
Fixes: 91fc764d7059 ("mmc: core: new discard feature support at eMMC v4.5") Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In __mmc_test_register_dbgfs_file(), we need to assign 'file', as it's
being used when removing the debugfs files when the mmc_test module is
removed.
Fixes: afca4e1d4466 ("mmc: core: no need to check return value of debugfs_create functions") Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org
[Ulf: Re-wrote the commit msg] Link: https://lore.kernel.org/r/20221123095506.1965691-1-yebin@huaweicloud.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The firmware on some systems may configure GPIO pins to be
an interrupt source in so called "direct IRQ" mode. In such
cases the GPIO controller driver has no idea if those pins
are being used or not. At the same time, there is a known bug
in the firmwares that don't restore the pin settings correctly
after suspend, i.e. by an unknown reason the Rx value becomes
inverted.
Hence, let's save and restore the pins that are configured
as GPIOs in the input mode with GPIROUTIOXAPIC bit set.
Cc: stable@vger.kernel.org Reported-and-tested-by: Dale Smith <dalepsmith@gmail.com> Reported-and-tested-by: John Harris <jmharris@gmail.com> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214749 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20221124222926.72326-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "force" argument to write_spec_ctrl_current() is currently ambiguous
as it does not guarantee the MSR write. This is due to the optimization
that writes to the MSR happen only when the new value differs from the
cached value.
This is fine in most cases, but breaks for S3 resume when the cached MSR
value gets out of sync with the hardware MSR value due to S3 resetting
it.
When x86_spec_ctrl_current is same as x86_spec_ctrl_base, the MSR write
is skipped. Which results in SPEC_CTRL mitigations not getting restored.
Move the MSR write from write_spec_ctrl_current() to a new function that
unconditionally writes to the MSR. Update the callers accordingly and
rename functions.
If DAT metadata file is corrupted on disk, there is a case where
req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during
a b-tree operation that cascadingly updates ancestor nodes of the b-tree,
because nilfs_dat_commit_alloc() for a lower level block can initialize
the blocknr on the same DAT entry between nilfs_dat_prepare_end() and
nilfs_dat_commit_end().
If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free()
without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and
causes the NULL pointer dereference above in
nilfs_palloc_commit_free_entry() function, which leads to a crash.
Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh
before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free().
This also calls nilfs_error() in that case to notify that there is a fatal
flaw in the filesystem metadata and prevent further operations.
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the related file to use "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/vm`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
The config to be able to inject error codes into any function annotated
with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is
enabled. But unfortunately, this is always enabled on x86 when KPROBES
is enabled, and there's no way to turn it off.
As kprobes is useful for observability of the kernel, it is useful to
have it enabled in production environments. But error injection should
be avoided. Add a prompt to the config to allow it to be disabled even
when kprobes is enabled, and get rid of the "def_bool y".
This is a kernel debug feature (it's in Kconfig.debug), and should have
never been something enabled by default.
Cc: stable@vger.kernel.org Fixes: d8739ea2f9b26 ("error-injection: Separate error-injection from kprobe") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak.
Fixes: 6d503ea9540b ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If coretemp_add_core() gets an error then pdata->core_data[indx]
is already NULL and has been kfreed. Don't pass that to
sysfs_remove_group() as that will crash in sysfs_remove_group().
After system resumed on some environment board, the promiscuous mode
is disabled because the SoC turned off. So, call ravb_set_rx_mode() in
the ravb_resume() to fix the issue.
CHECKSUM_COMPLETE signals that skb->csum stores the sum over the
entire packet. It does not imply that an embedded l4 checksum
field has been validated.
syzbot reported use-after-free in tun_detach() [1]. This causes call
trace like below:
==================================================================
BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673
The cause of the issue is that sock_put() from __tun_detach() drops
last reference count for struct net, and then notifier_call_chain()
from netdev_state_change() accesses that struct net.
This patch fixes the issue by calling sock_put() from tun_detach()
after all necessary accesses for the struct net has done.
The fileserver probing code attempts to work out the best fileserver to
use for a volume by retrieving the RTT calculated by AF_RXRPC for the
probe call sent to each server and comparing them. Sometimes, however,
no RTT estimate is available and rxrpc_kernel_get_srtt() returns false,
leading good fileservers to be given an RTT of UINT_MAX and thus causing
the rotation algorithm to ignore them.
Fix afs_select_fileserver() to ignore rxrpc_kernel_get_srtt()'s return
value and just take the estimated RTT it provides - which will be capped
at 1 second.
Fixes: 681663f222c6 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166965503999.3392585.13954054113218099395.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch changes the reported ethtool statistics for the lan9303
family of parts covered by this driver.
The TxUnderRun statistic label is renamed to RxShort to accurately
reflect what stat the device is reporting. I did not reorder the
statistics as that might cause problems with existing user code that
are expecting the stats at a certain offset.
Fixes: 85bad8d1801c ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Jerry Ray <jerry.ray@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().
Move for() loop with priv->rx_bd_v dereference under the check for
its validity.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2da75fbce8af ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by: Yuri Karpov <YKarpov@ispras.ru> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.
This patch adds sock_release() to fix the leak issue.
Fixes: 3b909f4adf04 ("9p connect fixes") Signed-off-by: Wang Hai <wanghai38@huawei.com> ACKed-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.
Fix by unregister NTB client device when ntb_transport_register_client()
failed.
Fixes: f064362e71d9 ("net: Add support for NTB virtual ethernet device") Signed-off-by: Yuan Can <yuancan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
phy_connect
phy_attach_direct() //set device driver
probe() //it's failed, driver is not bound
device_bind_driver() // probe failed, it's not called
//remove path:
phy_device_remove()
device_del()
device_release_driver_internal()
__device_release_driver() //dev->drv is not NULL
klist_remove() <- knode_driver is not added yet, cause null-ptr-deref
In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().
Fixes: 214555bbfc46 ("[PATCH] PHY Layer fixup") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: ac2a324087a0 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The watchdog timer is used to monitor whether the process
of transmitting data is timeout. If we use qlcnic driver,
the dev_watchdog() that is the timer handler of watchdog
timer will call qlcnic_tx_timeout() to process the timeout.
But the qlcnic_tx_timeout() calls msleep(), as a result,
the sleep-in-atomic-context bugs will happen. The processes
are shown below:
Fix by changing msleep() to mdelay(), the mdelay() is
busy-waiting and the bugs could be mitigated.
Fixes: 1452f89e049c ("qlcnic: 83xx CNA inter driver communication mechanism") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When having multiple dests with termination tables and second one
or afterwards fails the driver reverts usage of term tables but
doesn't reset the assignment in attr->dests[num_vport_dests].termtbl
which case a use-after-free when releasing the rule.
Fix by resetting the assignment of termtbl to null.
Fixes: 11a71d9177e8 ("net/mlx5e: Use termination table for VLAN push actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In of_fwnode_get_reference_args(), the refcount of of_args.np has
been incremented in the case of successful return from
of_parse_phandle_with_args() or of_parse_phandle_with_fixed_args().
Decrement the refcount if of_args is not returned to the caller of
of_fwnode_get_reference_args().
Fixes: 9dc988b1abd0 ("device property: Introduce fwnode_property_get_reference_args") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Link: https://lore.kernel.org/r/20221121023209.3909759-1-yangyingliang@huawei.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn:
'&data->list' not removed from list
If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will
be freed, but data->list will not be removed from driver_data.bmc_data,
then list traversal may cause UAF.
Fix by removeing it from driver_data.bmc_data before free().
Commit 22a5499ad748 ("scripts/faddr2line: Fix overlapping text section
failures") can cause faddr2line to fail on ppc64le on some
distributions, while it works fine on other distributions. The failure
can be attributed to differences in the readelf output.
$ ./scripts/faddr2line vmlinux find_busiest_group+0x00
no match for find_busiest_group+0x00
On ppc64le, readelf adds the localentry tag before the symbol name on
some distributions, and adds the localentry tag after the symbol name on
other distributions. This problem has been discussed previously:
This problem can be overcome by filtering out the localentry tags in the
readelf output. Similar fixes are already present in the kernel by way
of the following commits:
8743c4c8fad2 ("libbpf: Fix VERSIONED_SYM_COUNT number parsing") 286ddc67fb16 ("libbpf: Fix readelf output parsing for Fedora")
[jpoimboe: rework commit log]
Fixes: 22a5499ad748 ("scripts/faddr2line: Fix overlapping text section failures") Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Link: https://lore.kernel.org/r/20220927075211.897152-1-srikar@linux.vnet.ibm.com Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix an implicit declaration of function error for rpr0521 under some configs
When CONFIG_RPR0521 is enabled without CONFIG_IIO_TRIGGERED_BUFFER,
the build results in "implicit declaration of function" errors, e.g.,
drivers/iio/light/rpr0521.c:434:3: error: implicit declaration of function
'iio_trigger_poll_chained' [-Werror=implicit-function-declaration]
434 | iio_trigger_poll_chained(data->drdy_trigger0);
| ^~~~~~~~~~~~~~~~~~~~~~~~
This fix adds select dependencies to RPR0521's configuration declaration.
The array size of afe4404_channel_leds and afe4404_channel_offdacs
are less than channels, so access with chan->address cause OOB read
in afe4404_[read|write]_raw. Fix it by moving access before use them.
Fixes: 4eb7ccc04fc9 ("iio: health/afe440x: Use regmap fields") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20221107152010.95937-1-weiyongjun@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The array size of afe4403_channel_leds is less than channels, so access
with chan->address cause OOB read in afe4403_read_raw. Fix it by moving
access before use it.
Fixes: 4eb7ccc04fc9 ("iio: health/afe440x: Use regmap fields") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20221107151946.89260-1-weiyongjun@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling drm_connector_update_edid_property() in
amdgpu_connector_free_edid() causes a noticeable pause in
the system every 10 seconds on polled outputs so revert this
part of the change.
drm_display_info is updated by drm_get_edid() or
drm_connector_update_edid_property(). In the amdgpu driver it is almost
always updated when the edid is read in amdgpu_connector_get_edid(),
but not always. Change amdgpu_connector_get_edid() and
amdgpu_connector_free_edid() to keep drm_display_info updated.
Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Claudio Suarez <cssk@net-c.es> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 602ad43c3cd8 ("drm/amdgpu: Partially revert "drm/amdgpu: update drm_display_info correctly when the edid is read"") Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of having 2 places that short circuit the qgroup leaf scan have
everything in the qgroup_rescan_leaf function. In addition to that, also
ensure that the inconsistent qgroup flag is set when rescan_should_stop
returns true. This both retains the old behavior when -EINTR was set in
the body of the loop and at the same time also extends this behavior
when scanning is interrupted due to remount or unmount operations.
Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: f7e942b5bb35 ("btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()") Signed-off-by: Sasha Levin <sashal@kernel.org>
In case the requested bus clock is higher than the input clock, the correct
dividers (pre = 0, post = 0) are returned from mx51_ecspi_clkdiv(), but
*fres is left uninitialized and therefore contains an arbitrary value.
This causes trouble for the recently introduced PIO polling feature as the
value in spi_imx->spi_bus_clk is used there to calculate for which
transfers to enable PIO polling.
Fix this by setting *fres even if no clock dividers are in use.
This issue was observed on Kontron BL i.MX8MM with an SPI peripheral clock set
to 50 MHz by default and a requested SPI bus clock of 80 MHz for the SPI NOR
flash.
With the fix applied the debug message from mx51_ecspi_clkdiv() now prints the
following:
file_modified() must be called with inode lock held. fuse_fallocate()
didn't lock the inode in case of just FALLOC_KEEP_SIZE flags value, which
resulted in a kernel Warning in notify_change().
Lock the inode unconditionally, like all other fallocate implementations
do.
In case of Gen12 video and compute engines, TLB_INV registers are masked -
to modify one bit, corresponding bit in upper half of the register must
be enabled, otherwise nothing happens.
CVE: CVE-2022-4139 Suggested-by: Chris Wilson <chris.p.wilson@intel.com> Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Fixes: 5563858c4d4d ("drm/i915: Flush TLBs before releasing backing store") Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since switching to HMM we always need that because we no longer grab
references to the pages.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> CC: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's been a very long running bug that seems to have been neglected for
a while, where amdgpu consistently triggers a KASAN error at start:
BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu]
Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889
After digging through amd's rather creative method for accessing registers,
I eventually discovered the problem likely has to do with the fact that on
my dce120 GPU there are supposedly 7 sets of audio registers. But we only
define a register mapping for 6 sets.
So, fix this and fix the KASAN warning finally.
Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although kset_unregister() can eventually remove all attribute files,
explicitly rolling back with the matching function makes the code logic
look clearer.
CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
btrfs_ioctl_ino_to_path() frees the search path after the userspace copy
from the temp buffer @ipath->fspath. Which potentially can lead to a lock
splat warning.
Fix this by freeing the path before we copy it to userspace.
CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We do generally the right thing here, copying the references into a
temporary buffer, however we are still holding the path when we do
copy_to_user from the temporary buffer. Fix this by freeing the path
before we copy to user space.
Reported-by: syzbot+4ef9e52e464c6ff47d9d@syzkaller.appspotmail.com CC: stable@vger.kernel.org # 4.19+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some android userspace is sending BINDER_TYPE_FDA objects with
num_fds=0. Like the previous patch, this is reproducible when
playing a video.
Before commit 8e46ef046ffe BINDER_TYPE_FDA objects with num_fds=0
were 'correctly handled', as in no fixup was performed.
After commit 8e46ef046ffe we aggregate fixup and skip regions in
binder_ptr_fixup structs and distinguish between the two by using
the skip_size field: if it's 0, then it's a fixup, otherwise skip.
When processing BINDER_TYPE_FDA objects with num_fds=0 we add a
skip region of skip_size=0, and this causes issues because now
binder_do_deferred_txn_copies will think this was a fixup region.
To address that, return early from binder_translate_fd_array to
avoid adding an empty skip region.
When handling BINDER_TYPE_FDA object we are pushing a parent fixup
with a certain skip_size but no scatter-gather copy object, since
the copy is handled standalone.
If BINDER_TYPE_FDA is the last children the scatter-gather copy
loop will never stop to skip it, thus we are left with an item in
the parent fixup list. This will trigger the BUG_ON().
This is reproducible in android when playing a video.
We receive a transaction that looks like this:
obj[0] BINDER_TYPE_PTR, parent
obj[1] BINDER_TYPE_PTR, child
obj[2] BINDER_TYPE_PTR, child
obj[3] BINDER_TYPE_FDA, child
binder_uintptr_t is not the same as uintptr_t, so converting it into a
pointer requires a second cast:
drivers/android/binder.c: In function 'binder_translate_fd_array':
drivers/android/binder.c:2511:28: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
2511 | sender_ufda_base = (void __user *)sender_uparent->buffer + fda->parent_offset;
| ^
BINDER_TYPE_PTR objects point to memory areas in the
source process to be copied into the target buffer
as part of a transaction. This implements a scatter-
gather model where non-contiguous memory in a source
process is "gathered" into a contiguous region in
the target buffer.
The data can include pointers that must be fixed up
to correctly point to the copied data. To avoid making
source process pointers visible to the target process,
this patch defers the copy until the fixups are known
and then copies and fixeups are done together.
There is a special case of BINDER_TYPE_FDA which applies
the fixup later in the target process context. In this
case the user data is skipped (so no untranslated fds
become visible to the target).
This patch is to prepare for an up coming patch where we read
pre-translated fds from the sender buffer and translate them before
copying them to the target. It does not change run time.
The patch adds two new parameters to binder_translate_fd_array() to
hold the sender buffer and sender buffer parent. These parameters let
us call copy_from_user() directly from the sender instead of using
binder_alloc_copy_from_buffer() to copy from the target. Also the patch
adds some new alignment checks. Previously the alignment checks would
have been done in a different place, but this lets us print more
useful error messages.
Transactions are copied from the sender to the target
first and objects like BINDER_TYPE_PTR and BINDER_TYPE_FDA
are then fixed up. This means there is a short period where
the sender's version of these objects are visible to the
target prior to the fixups.
Instead of copying all of the data first, copy data only
after any needed fixups have been applied.
This commit flushes the journal on suspend. It is prerequisite for the
next commit that enables activating dm integrity devices in read-only mode.
Note that we deliberately didn't flush the journal on suspend, so that the
journal replay code would be tested. However, the dm-integrity code is 5
years old now, so that journal replay is well-tested, and we can make this
change now.
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before asus_wmi_set_xusb2pr() returns.
RS485-enabled UART ports on TI Sitara SoCs with active-low polarity
exhibit a Transmit Enable glitch on ->set_termios():
omap8250_restore_regs(), which is called from omap_8250_set_termios(),
sets the TCRTLR bit in the MCR register and clears all other bits,
including RTS. If RTS uses active-low polarity, it is now asserted
for no reason.
The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR
register. That variable is always zero, so the RTS bit is still cleared
(incorrectly so if RTS is active-high).
(up->mcr is not, as one might think, a cache of the MCR register's
current value. Rather, it only caches a single bit of that register,
the AFE bit. And it only does so if the UART supports the AFE bit,
which OMAP does not. For details see serial8250_do_set_termios() and
serial8250_do_set_mctrl().)
Finally at the end of omap8250_restore_regs(), the MCR register is
restored (and RTS deasserted) by a call to up->port.ops->set_mctrl()
(which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().
So there's an RTS glitch between setting TCRTLR and calling
serial8250_em485_stop_tx(). Avoid by using a read-modify-write
when setting TCRTLR.
While at it, drop a redundant initialization of up->mcr. As explained
above, the variable isn't used by the driver and it is already
initialized to zero because it is part of the static struct
serial8250_ports[] declared in 8250_core.c. (Static structs are
initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)
Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Su Bao Cheng <baocheng.su@siemens.com> Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: https://lore.kernel.org/r/6554b0241a2c7fd50f32576fdbafed96709e11e8.1664278942.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Nanote UMPC-01 mini laptop has stereo speakers, while the default
bytcht_es8316 settings assume a mono speaker setup. Add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221025140942.509066-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, in clang version of gcov code when module is getting removed
gcov_info_add() incorrectly adds the sfn_ptr->counter to all the
dst->functions and it result in the kernel panic in below crash report.
Fix this by properly handling it.
When extending segments, nilfs_sufile_alloc() is called to get an
unassigned segment, then mark it as dirty to avoid accidentally allocating
the same segment in the future.
But for some special cases such as a corrupted image it can be unreliable.
If such corruption of the dirty state of the segment occurs, nilfs2 may
reallocate a segment that is in use and pick the same segment for writing
twice at the same time.
This case started with segbuf1.segnum = 3, nextnum = 4 when constructed.
It supposed segment 4 has already been allocated and marked as dirty.
However the dirty state was corrupted and segment 4 usage was not dirty.
For the first time nilfs_segctor_extend_segments() segment 4 was allocated
again, which made segbuf2 and next segbuf3 had same segment 4.
sb_getblk() will get same bh for segbuf2 and segbuf3, and this bh is added
to both buffer lists of two segbuf. It makes the lists broken which
causes NULL pointer dereference.
Fix the problem by setting usage as dirty every time in
nilfs_sufile_mark_dirty(), which is called during constructing current
segment to be written out and before allocating next segment.
The coreboot_table driver registers a coreboot bus while probing a
"coreboot_table" device representing the coreboot table memory region.
Probing this device (i.e., registering the bus) is a dependency for the
module_init() functions of any driver for this bus (e.g.,
memconsole-coreboot.c / memconsole_driver_init()).
With synchronous probe, this dependency works OK, as the link order in
the Makefile ensures coreboot_table_driver_init() (and thus,
coreboot_table_probe()) completes before a coreboot device driver tries
to add itself to the bus.
With asynchronous probe, however, coreboot_table_probe() may race with
memconsole_driver_init(), and so we're liable to hit one of these two:
1. coreboot_driver_register() eventually hits "[...] the bus was not
initialized.", and the memconsole driver fails to register; or
2. coreboot_driver_register() gets past #1, but still races with
bus_register() and hits some other undefined/crashing behavior (e.g.,
in driver_find() [1])
We can resolve this by registering the bus in our initcall, and only
deferring "device" work (scanning the coreboot memory region and
creating sub-devices) to probe().
[1] Example failure, using 'driver_async_probe=*' kernel command line:
Fix a bug where the kernel module can't be loaded after it has been
unloaded as the devices are still present and conflicting with the
to be created coreboot devices.
When decoding the snaps fails it maybe leaving the 'first_realm'
and 'realm' pointing to the same snaprealm memory. And then it'll
put it twice and could cause random use-after-free, BUG_ON, etc
issues.
We will only track the uppest parent snapshot realm from which we
need to rebuild the snapshot contexts _downward_ in hierarchy. For
all the others having no new snapshot we will do nothing.
This fix will avoid calling ceph_queue_cap_snap() on some inodes
inappropriately. For example, with the code in mainline, suppose there
are 2 directory hierarchies (with 6 directories total), like this:
/dir_X1/dir_X2/dir_X3/
/dir_Y1/dir_Y2/dir_Y3/
Firstly, make a snapshot under /dir_X1/dir_X2/.snap/snap_X2, then make a
root snapshot under /.snap/root_snap. Every time we make snapshots under
/dir_Y1/..., the kclient will always try to rebuild the snap context for
snap_X2 realm and finally will always try to queue cap snaps for dir_Y2
and dir_Y3, which makes no sense.
That's because the snap_X2's seq is 2 and root_snap's seq is 3. So when
creating a new snapshot under /dir_Y1/... the new seq will be 4, and
the mds will send the kclient a snapshot backtrace in _downward_
order: seqs 4, 3.
When ceph_update_snap_trace() is called, it will always rebuild the from
the last realm, that's the root_snap. So later when rebuilding the snap
context, the current logic will always cause it to rebuild the snap_X2
realm and then try to queue cap snaps for all the inodes related in that
realm, even though it's not necessary.
This is accompanied by a lot of these sorts of dout messages:
Also, the 'invalidate' word is not precise here. In actuality, it will
cause a rebuild of the existing snapshot contexts or just build
non-existent ones. Rename it to 'rebuild_snapcs'.
URL: https://tracker.ceph.com/issues/44100 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 51884d153f7e ("ceph: avoid putting the realm twice when decoding snaps fails") Signed-off-by: Sasha Levin <sashal@kernel.org>
When using multiple instances of this driver the compensation PROM was
overwritten by the last initialized sensor. Now each sensor has own PROM
storage.
Signed-off-by: Mitja Spes <mitja@lxnav.com> Fixes: ec9a887e66b6 ("iio: pressure: ms5611: add support for MS5607 temperature and pressure sensor") Link: https://lore.kernel.org/r/20221021135827.1444793-2-mitja@lxnav.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ms5611 passes &indio_dev->dev as a parameter to all its IO callbacks
only to directly cast the struct device back to struct iio_dev. And the
struct iio_dev is then only used to get the drivers state struct.
Simplify this a bit by passing the state struct directly. This makes it a
bit easier to follow what the code is doing.
When using dash as /bin/sh, the CC_HAS_ASM_GOTO_TIED_OUTPUT test fails
with a syntax error which is not the one we are looking for:
<stdin>: In function ‘foo’:
<stdin>:1:29: warning: missing terminating " character
<stdin>:1:29: error: missing terminating " character
<stdin>:2:5: error: expected ‘:’ before ‘+’ token
<stdin>:2:7: warning: missing terminating " character
<stdin>:2:7: error: missing terminating " character
<stdin>:2:5: error: expected declaration or statement at end of input
CRC errors (code -84 EILSEQ) have been observed for some SanDisk
Ultra A1 cards when running at 50MHz.
Waveform analysis suggest that the level shifters that are used on the
RK3399-Q7 module for voltage translation between 3.0 and 3.3V don't
handle clock rates at or above 48MHz properly. Back off to 40MHz for
some safety margin.
The core DWC3 device node was not properly removed by the custom
dwc3_exynos_remove_child() function. Replace it with generic
of_platform_depopulate() which does that job right.
Fixes: b9b134803fac ("usb: dwc3: exynos: Use of_platform API to create dwc3 core pdev") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Cc: stable@vger.kernel.org Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20221110154131.2577-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the vdso Makefile to use "grep -E" instead.
The size of the TOD programmable field was incorrectly increased from
four to eight bytes with commit 59e019433d35 ("s390/dump: cleanup CPU
save area handling").
This leads to an elf notes section NT_S390_TODPREG which has a size of
eight instead of four bytes in case of kdump, however even worse is
that the contents is incorrect: it is supposed to contain only the
contents of the TOD programmable field, but in fact contains a mix of
the TOD programmable field (32 bit upper bits) and parts of the CPU
timer register (lower 32 bits).
Fix this by simply changing the size of the todpreg field within the
save area structure. This will implicitly also fix the size of the
corresponding elf notes sections.
This also gets rid of this compile time warning:
in function ‘fortify_memcpy_chk’,
inlined from ‘save_area_add_regs’ at arch/s390/kernel/crash_dump.c:99:2:
./include/linux/fortify-string.h:413:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field
(2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 59e019433d35 ("s390/dump: cleanup CPU save area handling") Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ACPI buffer memory (string.pointer) should be freed as the buffer is
not used after returning from bgx_acpi_match_id(), free it to prevent
memory leak.
Fixes: a135d7afd036 ("net, thunder, bgx: Add support to get MAC address from ACPI.") Signed-off-by: Yu Liao <liaoyu15@huawei.com> Link: https://lore.kernel.org/r/20221123082237.1220521-1-liaoyu15@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The first validation check for EVT_TRANSACTION has two different checks
tied together with logical AND. One is a check for minimum packet length,
and the other is for a valid aid_tag. If either condition is true (fails),
then an error should be triggered. The fix is to change && to ||.
For DASD devices in raw_track_access mode only full track images are
read and written.
For this purpose it is not necessary to do search operation in the
locate record extended function. The documentation even states that
this might fail if the searched record is not found on a track.
Currently the driver sets a value of 1 in the search field for the first
record after record zero. This is the default for disks not in
raw_track_access mode but record 1 might be missing on a completely
empty track.
There has not been any problem with this on IBM storage servers but it
might lead to errors with DASD devices on other vendors storage servers.
Fix this by setting the search field to 0. Record zero is always available
even on a completely empty track.
Fixes: c007a8beb930 ("[S390] dasd: Add support for raw ECKD access.") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20221123160719.3002694-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
When connect() is called on a socket bound to the wildcard address,
we change the socket's saddr to a local address. If the socket
fails to connect() to the destination, we have to reset the saddr.
However, when an error occurs after inet_hash6?_connect() in
(dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave
the socket bound to the address.
From the user's point of view, whether saddr is reset or not varies
with errno. Let's fix this inconsistent behaviour.
Note that after this patch, the repro [0] will trigger the WARN_ON()
in inet_csk_get_port() again, but this patch is not buggy and rather
fixes a bug papering over the bhash2's bug for which we need another
fix.
For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect()
by this sequence:
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). Call pci_dev_put() before returning from
bnx2x_vf_is_pcie_pending() to avoid refcount leak.
Fixes: dfd193b1e8bb ("bnx2x: Prepare device and initialize VF database") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In former times, info->feature was populated via the parent driver
by pdata/regulator_init_data->driver_data for all regulators when
USB_PRODUCT_ID_LSB indicates a TWL6032.
Today, the information is not set, so re-add it at the regulator
definitions.
Fixes: d2be0b270ac3f ("regulator: twl: make driver DT only") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20221120221208.3093727-2-andreas@kemnade.info Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
One extra conn_get() is needed in tipc_conn_alloc(), as after
tipc_conn_alloc() is called, tipc_conn_close() may free this
con before deferencing it in tipc_topsrv_accept():
This patch fixes it by holding it in tipc_conn_alloc(), then after
all accessing in tipc_topsrv_accept() releasing it. Note when does
this in tipc_topsrv_kern_subscr(), as tipc_conn_rcv_sub() returns
0 or -1 only, we don't need to check for "> 0".
Fixes: 4c838d76896f ("tipc: introduce new TIPC server infrastructure") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was caused by !con->sock in tipc_conn_close(). In tipc_topsrv_accept(),
con is allocated in conn_idr then its sock is set:
con = tipc_conn_alloc();
... <----[1]
con->sock = newsock;
If tipc_conn_close() is called in anytime of [1], the null-pointer-def
is triggered by con->sock->sk due to con->sock is not yet set.
This patch fixes it by moving the con->sock setting to tipc_conn_alloc()
under s->idr_lock. So that con->sock can never be NULL when getting the
con from s->conn_idr. It will be also safer to move con->server and flag
CF_CONNECTED setting under s->idr_lock, as they should all be set before
tipc_conn_alloc() is called.
Fixes: 4c838d76896f ("tipc: introduce new TIPC server infrastructure") Reported-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a bug in calculation of FW tracer timestamp. Decreasing one in the
calculation should effect only bits 52_7 and not effect bits 6_0 of the
timestamp, otherwise bits 6_0 are always set in this calculation.
If device_register() returns error in vmbus_device_register(),
the name allocated by dev_set_name() must be freed. As comment
of device_register() says, it should use put_device() to give
up the reference in the error path. So fix this by calling
put_device(), then the name can be freed in kobject_cleanup().
Fixes: eba68b3942d9 ("Staging: hv: make the Hyper-V virtual bus code build") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221119081135.1564691-3-yangyingliang@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the error path of vmbus_device_register(), device_unregister()
is called, which calls vmbus_device_release(). The latter frees
the struct hv_device that was passed in to vmbus_device_register().
So remove the kfree() in vmbus_add_channel_work() to avoid a double
free.
Fixes: 9fb1638781cc ("vmbus: add per-channel sysfs info") Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20221119081135.1564691-2-yangyingliang@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting of the port flag `NFP_PORT_CHANGED`, introduced
to ensure the correct reading of EEPROM data, causes a
fatal kernel NULL pointer dereference in cases where
the target netdev type cannot be determined.
Add validation of port struct pointer before attempting
to set the `NFP_PORT_CHANGED` flag. Return that operation
is not supported if the netdev type cannot be determined.
Fixes: 04bc9617883c ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put().
In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called,
so in error path in probe() and remove() function, pci_dev_put()
should be called to avoid refcount leak. Compile tested only.
projects / kernel.git / log