Huacai Chen [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Use TLB for ioremap()
We can support more cache attributes (e.g., CC, SUC and WUC) and page
protection when we use TLB for ioremap(). The implementation is based
on GENERIC_IOREMAP.
The existing simple ioremap() implementation has better performance so
we keep it and introduce ARCH_IOREMAP to control the selection.
We move pagetable_init() earlier to make early ioremap() works, and we
modify the PCI ecam mapping because the TLB-based version of ioremap()
will actually take the size into account.
Huacai Chen [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Support access filter to /dev/mem interface
Accidental access to /dev/mem is obviously disastrous, but specific
access can be used by people debugging the kernel. So select GENERIC_
LIB_DEVMEM_IS_ALLOWED, as well as define ARCH_HAS_VALID_PHYS_ADDR_RANGE
and related helpers, to support access filter to /dev/mem interface.
Signed-off-by: Weihao Li <liweihao@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Refactor cache probe and flush methods
Current cache probe and flush methods have some drawbacks:
1, Assume there are 3 cache levels and only 3 levels;
2, Assume L1 = I + D, L2 = V, L3 = S, V is exclusive, S is inclusive.
However, the fact is I + D, I + D + V, I + D + S and I + D + V + S are
all valid. So, refactor the cache probe and flush methods to adapt more
types of cache hierarchy.
Rui Wang [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: mm: Refactor TLB exception handlers
This patch simplifies TLB load, store and modify exception handlers:
1. Reduce instructions, such as alu/csr and memory access;
2. Execute tlb search instruction only in the fast path;
3. Return directly from the fast path for both normal and huge pages;
4. Re-tab the assembly for better vertical alignment.
And fixes the concurrent modification issue of fast path for huge pages.
This issue will occur in the following steps:
CPU-1 (In TLB exception) CPU-2 (In THP splitting)
1: Load PMD entry (HUGE=1)
2: Goto huge path
3: Store PMD entry (HUGE=0)
4: Reload PMD entry (HUGE=0)
5: Fill TLB entry (PA is incorrect)
This patch also slightly improves the TLB processing performance:
Xi Ruoyao [Wed, 12 Oct 2022 08:36:14 +0000 (16:36 +0800)]
LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules
GCC >= 13 and GNU assembler >= 2.40 use these relocations to address
external symbols, so we need to add them.
Let the module loader emit GOT entries for data symbols so we would be
able to handle GOT relocations. The GOT entry is just the data's symbol
address.
In module.lds, emit a stub .got section for a section header entry. The
actual content of the section entry will be filled at runtime by module_
frob_arch_sections().
Tested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Xi Ruoyao [Wed, 12 Oct 2022 08:36:08 +0000 (16:36 +0800)]
LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS
If explicit relocation hints are used by the toolchain, -Wa,-mla-*
options will be useless for the C code. So only use them for the
!CONFIG_AS_HAS_EXPLICIT_RELOCS case.
Replace "la" with "la.pcrel" in head.S to keep the semantic consistent
with new and old toolchains for the low level startup code.
For per-CPU variables, the "address" of the symbol is actually an offset
from $r21. The value is near the loading address of main kernel image,
but far from the loading address of modules. So we use model("extreme")
attibute to tell the compiler that a PC-relative addressing with 32-bit
offset is not sufficient for local per-CPU variables.
The behavior with different assemblers and compilers are summarized in
the following table:
AS has CC has
explicit relocs explicit relocs * Behavior
==============================================================
No No Use la.* macros.
No change from Linux 6.0.
--------------------------------------------------------------
No Yes Disable explicit relocs.
No change from Linux 6.0.
--------------------------------------------------------------
Yes No Not supported.
--------------------------------------------------------------
Yes Yes Enable explicit relocs.
No -Wa,-mla* options used.
==============================================================
*: We assume CC must have model attribute if it has explicit relocs.
Both features are added in GCC 13 development cycle, so any GCC
release >= 13 should be OK. Using early GCC 13 development snapshots
may produce modules with unsupported relocations.
GNU as >= 2.40 and GCC >= 13 will support using explicit relocation
hints in the assembly code, instead of la.* macros. The usage of
explicit relocation hints can improve code generation so it's enabled
by default by GCC >= 13.
Introduce a Kconfig option AS_HAS_EXPLICIT_RELOCS as the switch for
"use explicit relocation hints or not".
Tested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Wed, 12 Oct 2022 08:36:08 +0000 (16:36 +0800)]
LoongArch: Mark __xchg() and __cmpxchg() as __always_inline
Commit 7a0f539ed93c ("compiler: enable CONFIG_OPTIMIZE_INLINING
forcibly") allows compiler to uninline functions marked as 'inline'.
In case of __xchg()/__cmpxchg() this would cause to reference
BUILD_BUG(), which is an error case for catching bugs and will not
happen for correct code, if __xchg()/__cmpxchg() is inlined.
This bug can be produced with CONFIG_DEBUG_SECTION_MISMATCH enabled,
and the solution is similar to below commits: 9b099fb39942956 ("MIPS: include: Mark __xchg as __always_inline"), 83f6e6eea06282e ("MIPS: include: Mark __cmpxchg as __always_inline").
Huacai Chen [Wed, 12 Oct 2022 08:36:08 +0000 (16:36 +0800)]
LoongArch: Flush TLB earlier at initialization
Move local_flush_tlb_all() earlier (just after setup_ptwalker() and
before page allocation). This can avoid stale TLB entries misguiding
the later page allocation. Without this patch the second kernel of
kexec/kdump fails to boot SMP.
BTW, move output_pgtable_bits_defines() into tlb_init() since it has
nothing to do with tlb handler setup.
Tiezhu Yang [Wed, 12 Oct 2022 08:36:08 +0000 (16:36 +0800)]
LoongArch: Do not create sysfs control file for io master CPUs
Now io master CPUs are not hotpluggable on LoongArch, but in the current
code only /sys/devices/system/cpu/cpu0/online is not created. Let us set
the hotpluggable field of all the io master CPUs as 0, then prevent to
create sysfs control file for all the io master CPUs which confuses some
user space tools. This is similar with commit d378f3fe26e6 ("MIPS: CPU#0
is not hotpluggable").
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Linus Torvalds [Sun, 2 Oct 2022 16:41:27 +0000 (09:41 -0700)]
Merge tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf fixes from Ingo Molnar:
- Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs
- Fix KVM guest PEBS register handling
- Fix race/reentry bug in perf_output_read_group() reading of PMU
counters
* tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix reentry problem in perf_output_read_group()
perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
perf/x86/intel: Fix unchecked MSR access error for Alder Lake N
Linus Torvalds [Sun, 2 Oct 2022 16:30:35 +0000 (09:30 -0700)]
Merge tag 'x86_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add the respective UP last level cache mask accessors in order not to
cause segfaults when lscpu accesses their representation in sysfs
- Fix for a race in the alternatives batch patching machinery when
kprobes are set
* tag 'x86_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cacheinfo: Add a cpu_llc_shared_mask() UP variant
x86/alternative: Fix race in try_get_desc()
i2c: davinci: fix PM disable depth imbalance in davinci_i2c_probe
The pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced according to context.
Linus Torvalds [Sat, 1 Oct 2022 16:39:42 +0000 (09:39 -0700)]
Merge tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some tiny USB and Thunderbolt driver fixes and quirks.
Included in here are:
- three uas/usb-storage driver quirks to get the devices working
properly due to broken firmware images in them (they can not run at
high data rates, and are also throttled on other operating systems
because of this)
- thunderbolt bugfix for plug event delays
- typec runtime warning removal
- dwc3 st driver bugfix. Note, a follow-on fix for this will end up
coming in for 6.1-rc1 as the developers are still arguing over what
the final solution will be, but this should be sufficient for now
All of these have been in linux-next with no reported problems"
* tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
uas: ignore UAS for Thinkplus chips
usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
uas: add no-uas quirk for Hiksemi usb_disk
usb: dwc3: st: Fix node's child name
usb: typec: ucsi: Remove incorrect warning
thunderbolt: Explicitly reset plug events delay back to USB4 spec value
Linus Torvalds [Sat, 1 Oct 2022 16:27:18 +0000 (09:27 -0700)]
Merge tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes for the v4l2 ioctl handler logic
- a fix for an out of bound access in the DVB videobuf2 handler
- three driver fixes (rkvdec, mediatek/vcodek and uvcvideo)
* tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rkvdec: Disable H.264 error detection
media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
media: dvb_vb2: fix possible out of bound access
media: v4l2-ioctl.c: fix incorrect error path
media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
media: uvcvideo: Fix InterfaceProtocol for Quanta camera
Linus Torvalds [Sat, 1 Oct 2022 16:13:29 +0000 (09:13 -0700)]
Merge tag 'mm-hotfixes-stable-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"One MAINTAINERS update, two MM fixes, both cc:stable"
The previous pull wasn't fated to be the last one..
* tag 'mm-hotfixes-stable-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
damon/sysfs: fix possible memleak on damon_sysfs_add_target
mm: fix BUG splat with kvmalloc + GFP_ATOMIC
MAINTAINERS: drop entry to removed file in ARM/RISCPC ARCHITECTURE
Levi Yun [Mon, 26 Sep 2022 16:06:11 +0000 (16:06 +0000)]
damon/sysfs: fix possible memleak on damon_sysfs_add_target
When damon_sysfs_add_target couldn't find proper task, New allocated
damon_target structure isn't registered yet, So, it's impossible to free
new allocated one by damon_sysfs_destroy_targets.
By calling damon_add_target as soon as allocating new target, Fix this
possible memory leak.
Link: https://lkml.kernel.org/r/20220926160611.48536-1-sj@kernel.org Fixes: 8157fe171f6b ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring") Signed-off-by: Levi Yun <ppbuk5246@gmail.com> Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [5.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MAINTAINERS: drop entry to removed file in ARM/RISCPC ARCHITECTURE
Commit 593362bd0600 ("ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER") removes
arch/arm/include/asm/hardware/entry-macro-iomd.S, but missed to adjust
MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Drop the file entry to the removed file in ARM/RISCPC ARCHITECTURE.
Link: https://lkml.kernel.org/r/20220919075255.386-1-lukas.bulwahn@gmail.com Fixes: 593362bd0600 ("ARM: riscpc: use GENERIC_IRQ_MULTI_HANDLER") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'drm-fixes-2022-10-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Some last minute amd fixes:
- VCN 4.x and GC 11.x fixes, mostly around fw"
* tag 'drm-fixes-2022-10-01' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcode
drm/amdgpu: add helper to init rlc firmware
drm/amdgpu: add helper to init rlc fw in header v2_4
drm/amdgpu: add helper to init rlc fw in header v2_3
drm/amdgpu: add helper to init rlc fw in header v2_2
drm/amdgpu: add helper to init rlc fw in header v2_1
drm/amdgpu: add helper to init rlc fw in header v2_0
drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfx
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"Here's the last batch of clk driver fixes for this release.
These patches fix serious problems, for example, i.MX has an issue
where changing the NAND clk frequency hangs the system. On Allwinner
H6 the GPU is being overclocked which could lead to long term hardware
damage.
And finally on some Broadcom SoCs the serial console stopped working
because the clk tree hierarchy description got broken by an
inadvertant DT node name change. That's fixed by using
'clock-output-names' to generate a stable and unique name for clks so
the framework can properly link things up.
There's also a couple build fixes in here. One to fix CONFIG_OF=n
builds and one to avoid an array out of bounds bug that happens during
clk registration on microchip. I hope that KASAN would have found that
OOB problem, but probably KASAN wasn't attempted. Instead LLVM/clang
compilation caused an oops, while GCC didn't"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx93: drop of_match_ptr
clk: iproc: Do not rely on node name for correct PLL setup
clk: sunxi-ng: h6: Fix default PLL GPU rate
clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
clk: microchip: mpfs: make the rtc's ahb clock critical
clk: microchip: mpfs: fix clk_cfg array bounds violation
clk: ingenic-tcu: Properly enable registers before accessing timers
Merge tag 'perf-tools-fixes-for-v6.0-2022-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fail the 'perf test record' entry on error, fixing a regression where
just setup stuff like allocating memory and not the actual things
being tested failed.
- Fixup disabling of -Wdeprecated-declarations for the python scripting
engine, the previous attempt had a brown paper bag thinko.
- Fix branch stack sampling test to include sanity check for branch
filter on PowerPC.
- Update is_ignored_symbol function to match the kernel ignored list,
fixing running the 'perf test' entry that compares resolving symbols
from kallsyms to resolving from vmlinux.
- Augment the data source type with ARM's neoverse_spe list, the
previous code was limited in its search resolving the data source.
- Fix some clang 5 variable set but unused cases.
- Get a perf cgroup more portably in BPF as the
__builtin_preserve_enum_value builtin is not available in older
versions of clang. In those cases we can forgo BPF's CO-RE (Compile
Once, Run Everywhere).
- More Fixes for Intel's hybrid CPU model.
* tag 'perf-tools-fixes-for-v6.0-2022-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf build: Fixup disabling of -Wdeprecated-declarations for the python scripting engine
perf tests mmap-basic: Remove unused variable to address clang 15 warning
perf parse-events: Ignore clang 15 warning about variable set but unused in bison produced code
perf tests record: Fail the test if the 'errs' counter is not zero
perf test: Fix test case 87 ("perf record tests") for hybrid systems
perf arm-spe: augment the data source type with neoverse_spe list
perf tests vmlinux-kallsyms: Update is_ignored_symbol function to match the kernel ignored list
perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter
perf parse-events: Remove "not supported" hybrid cache events
perf print-events: Fix "perf list" can not display the PMU prefix for some hybrid cache events
perf tools: Get a perf cgroup more portably in BPF
Merge tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"A small fix to the reported set of supported CPUID bits, and selftests
fixes:
- Skip tests that require EPT when it is not available
- Do not hang when a test fails with an empty stack trace
- avoid spurious failure when running access_tracking_perf_test in a
KVM guest
- work around GCC's tendency to optimize loops into mem*() functions,
which breaks because the guest code in selftests cannot call into
PLTs
- fix -Warray-bounds error in fix_hypercall_test"
* tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Compare insn opcodes directly in fix_hypercall_test
KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use
KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest
KVM: selftests: Gracefully handle empty stack traces
KVM: selftests: replace assertion with warning in access_tracking_perf_test
KVM: selftests: Skip tests that require EPT when it is not available
drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcode
switch to common helper to initialize rlc firmware
for gfx11
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To initialzie rlc firmware according to rlc
firmware header version
v2: squash in backwards compat fix
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: add helper to init rlc fw in header v2_4
To initialize rlc firmware in header v2_4
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: add helper to init rlc fw in header v2_3
To initialize rlc firmware in header v2_3
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: add helper to init rlc fw in header v2_2
To initialize rlc firmware in header v2_2
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: add helper to init rlc fw in header v2_1
To initialize rlc firmware in header v2_1
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: add helper to init rlc fw in header v2_0
To initialize rlc firmware in header v2_0
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"Some last minute fixes.
The virtio-blk one is the most important one since it was actually
seen in the field, but the rest of them are small and clearly safe,
everything here has been in next for a while"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix MQ to support non power of two num queues
vduse: prevent uninitialized memory accesses
virtio-blk: Fix WARN_ON_ONCE in virtio_queue_rq()
virtio_test: fixup for vq reset
virtio-crypto: fix memory-leak
vdpa/ifcvf: fix the calculation of queuepair
Merge tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
"A single NVMe pull request via Christoph with a few fixes that should
go into the 6.0 release:
- Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- Disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
Merge tag 'io_uring-6.0-2022-09-29' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Two fixes that should go into 6.0:
- Tweak the single issuer logic to register the task at creation,
rather than at first submit. SINGLE_ISSUER was added for 6.0, and
after some discussion on this, we decided to make it a bit stricter
while it's still possible to do so (Dylan).
- Stefan from Samba had some doubts on the level triggered poll that
was added for this release. Rather than attempt to mess around with
it now, just do the quick one-liner to disable it for release and
we have time to discuss and change it for 6.1 instead (me)"
* tag 'io_uring-6.0-2022-09-29' of git://git.kernel.dk/linux:
io_uring/poll: disable level triggered poll
io_uring: register single issuer task at creation
Merge tag 'pstore-v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore revert from Kees Cook:
"A misbehavior with some compression backends in pstore was just
discovered due to the recent crypto acomp migration.
Since we're so close to release, it seems better to just simply revert
it, and we can figure out what's going on without leaving it broken
for a release.
- Revert crypto acomp migration (Guilherme G. Piccoli)"
* tag 'pstore-v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "pstore: migrate to crypto acomp interface"
When using this new interface, both efi_pstore and ramoops
backends are unable to properly decompress dmesg if using
zstd, lz4 and lzo algorithms (and maybe more). It does succeed
with deflate though.
The message observed in the kernel log is:
[2.328828] pstore: crypto_acomp_decompress failed, ret = -22!
The pstore infrastructure is able to collect the dmesg with
both backends tested, but since decompression fails it's
unreadable. With this revert everything is back to normal.
Merge tag 'drm-fixes-2022-09-30-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Last set of fixes for 6.0 hopefully - minor bridge fixes, i915 fixes,
and a bunch of amdgpu fixes for new IP blocks, along with a couple of
regression fixes. Should be all set for merge window next week.
* tag 'drm-fixes-2022-09-30-1' of git://anongit.freedesktop.org/drm/drm: (26 commits)
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/i915/gt: Perf_limit_reasons are only available for Gen11+
drm/amdgpu: Add amdgpu suspend-resume code path under SRIOV
drm/amdgpu: Remove fence_process in count_emitted
drm/amdgpu: Correct the position in patch_cond_exec
drm/amd/display: fill in clock values when DPM is not enabled
drm/amd/display: Avoid unnecessary pixel rate divider programming
drm/amd/display: Remove assert for odm transition case
drm/amd/display: Fix typo in get_pixel_rate_div
drm/amd/display: Fix audio on display after unplugging another
drm/amd/display: Add explicit FIFO disable for DP blank
drm/amd/display: Wrap OTG disable workaround with FIFO control
drm/amd/display: Do DIO FIFO enable after DP video stream enable
drm/amd/display: Update DCN32 to use new SR latencies
drm/amd/display: Avoid avoid unnecessary pixel rate divider programming
drm/amdkfd: fix dropped interrupt in kfd_int_process_v11
drm/amdgpu: pass queue size and is_aql_queue to MES
drm/amdkfd: fix MQD init for GFX11 in init_mqd
drm/amd/pm: use adverse selection for dpm features unsupported by driver
drm/amd/pm: enable gfxoff feature for SMU 13.0.0
...
KVM: selftests: Compare insn opcodes directly in fix_hypercall_test
Directly compare the expected versus observed hypercall instructions when
verifying that KVM patched in the native hypercall (FIX_HYPERCALL_INSN
quirk enabled). gcc rightly complains that doing a 4-byte memcpy() with
an "unsigned char" as the source generates an out-of-bounds accesses.
Alternatively, "exp" and "obs" could be declared as 3-byte arrays, but
there's no known reason to copy locally instead of comparing directly.
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:63:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
63 | memcpy(&exp, exp_insn, sizeof(exp));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:64:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
64 | memcpy(&obs, obs_insn, sizeof(obs));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../lib.mk:135: tools/testing/selftests/kvm/x86_64/fix_hypercall_test] Error 1
Fixes: 66c8657d646c ("selftests: KVM: Test KVM_X86_QUIRK_FIX_HYPERCALL_INSN") Cc: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220928233652.783504-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use
Implement memcmp(), memcpy(), and memset() to override the compiler's
built-in versions in order to guarantee that the compiler won't generate
out-of-line calls to external functions via the PLT. This allows the
helpers to be safely used in guest code, as KVM selftests don't support
dynamic loading of guest code.
Steal the implementations from the kernel's generic versions, sans the
optimizations in memcmp() for unaligned accesses.
Put the utilities in a separate compilation unit and build with
-ffreestanding to fudge around a gcc "feature" where it will optimize
memset(), memcpy(), etc... by generating a recursive call. I.e. the
compiler optimizes itself into infinite recursion. Alternatively, the
individual functions could be tagged with
optimize("no-tree-loop-distribute-patterns"), but using "optimize" for
anything but debug is discouraged, and Linus NAK'd the use of the flag
in the kernel proper[*].
Cc: Andrew Jones <andrew.jones@linux.dev> Cc: Anup Patel <anup@brainfault.org> Cc: Atish Patra <atishp@atishpatra.org> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Janosch Frank <frankja@linux.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220928233652.783504-2-seanjc@google.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jim Mattson [Thu, 22 Sep 2022 23:18:54 +0000 (16:18 -0700)]
KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest
The only thing reported by CPUID.9 is the value of
IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the
guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest.
Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID.
Fixes: 4c6c3c2fac70 ("KVM: Sanitize cpuid") Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220922231854.249383-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bail out of test_dump_stack() if the stack trace is empty rather than
invoking addr2line with zero addresses. The problem with the latter is
that addr2line will block waiting for addresses to be passed in via
stdin, e.g. if running a selftest from an interactive terminal.
Opportunistically fix up the comment that mentions skipping 3 frames
since only 2 are skipped in the code.
Cc: Vipin Sharma <vipinsh@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220922231724.3560211-1-dmatlack@google.com>
[Small tweak to keep backtrace() call close to if(). - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: replace assertion with warning in access_tracking_perf_test
Page_idle uses {ptep/pmdp}_clear_young_notify which in turn calls
the mmu notifier callback ->clear_young(), which purposefully
does not flush the TLB.
When running the test in a nested guest, point 1. of the test
doc header is violated, because KVM TLB is unbounded by size
and since no flush is forced, KVM does not update the sptes
accessed/idle bits resulting in guest assertion failure.
More precisely, only the first ACCESS_WRITE in run_test() actually
makes visible changes, because sptes are created and the accessed
bit is set to 1 (or idle bit is 0). Then the first mark_memory_idle()
passes since access bit is still one, and sets all pages as idle
(or not accessed). When the next write is performed, the update
is not flushed therefore idle is still 1 and next mark_memory_idle()
fails.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926082923.299554-1-eesposit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
perf build: Fixup disabling of -Wdeprecated-declarations for the python scripting engine
A brown paper bag where -Wno-error=deprecated-declarations was added
from compiler output when the right thing is to add
-Wno-deprecated-declarations, fix it.
Fixes: d1d32f6c1382566d ("perf scripting python: Do not build fail on deprecation warnings") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A clang 15 build reveal several unused-but-set variables, removing the
'foo' variable in tests/mmap-basic.o object to address one of those
cases.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220929140514.226807-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 29 Sep 2022 08:13:47 +0000 (10:13 +0200)]
perf parse-events: Ignore clang 15 warning about variable set but unused in bison produced code
clang 15 now warns:
46 65.20 fedora:rawhide : FAIL clang version 15.0.0 (Fedora 15.0.0-3.fc38)
util/parse-events-bison.c:1401:9: error: variable 'parse_events_nerrs' set but not used [-Werror,-Wunused-but-set-variable]
int yynerrs = 0;
^
#define yynerrs parse_events_nerrs
^
1 error generated.
make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2
Just ignore one more compiler warning for the bison generated C code.
Committer notes:
Older clangs don't know about -Wunused-but-set-variable, so we need to
add -Wno-unknown-warning-option to avoid this:
37 44.92 fedora:32 : FAIL clang version 10.0.1 (Fedora 10.0.1-3.fc32)
error: unknown warning option '-Wno-unused-but-set-variable'; did you mean '-Wno-unused-const-variable'? [-Werror,-Wunknown-warning-option]
make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/20220929140514.226807-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi and can.
Current release - regressions:
- phy: don't WARN for PHY_UP state in mdio_bus_phy_resume()
- wifi: fix locking in mac80211 mlme
- eth:
- revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"
- mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
Previous releases - regressions:
- wifi: fix regression with non-QoS drivers
Previous releases - always broken:
- mptcp: fix unreleased socket in accept queue
- wifi:
- don't start TX with fq->lock to fix deadlock
- fix memory corruption in minstrel_ht_update_rates()
- eth:
- macb: fix ZynqMP SGMII non-wakeup source resume failure
- mt7531: only do PLL once after the reset
- usbnet: fix memory leak in usbnet_disconnect()
Misc:
- usb: qmi_wwan: add new usb-id for Dell branded EM7455"
* tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
mptcp: fix unreleased socket in accept queue
mptcp: factor out __mptcp_close() without socket lock
net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2}
net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge
can: c_can: don't cache TX messages for C_CAN cores
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
selftests: Fix the if conditions of in test_extra_filter()
net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()
net: stmmac: power up/down serdes in stmmac_open/release
wifi: mac80211: mlme: Fix double unlock on assoc success handling
wifi: mac80211: mlme: Fix missing unlock on beacon RX
wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
wifi: mac80211: fix regression with non-QoS drivers
wifi: mac80211: ensure vif queues are operational after start
wifi: mac80211: don't start TX with fq->lock to fix deadlock
wifi: cfg80211: fix MCS divisor value
net: hippi: Add missing pci_disable_device() in rr_init_one()
net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
...
Merge tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme into block-6.0
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
Leo Li [Mon, 26 Sep 2022 21:53:55 +0000 (17:53 -0400)]
drm/amd/display: Prevent OTG shutdown during PSR SU
[Why]
Enabling Z10 optimizations allows DMUB to disable the OTG during PSR
link-off. This theoretically saves power by putting more of the display
hardware to sleep. However, we observe that with PSR SU, it causes
visual artifacts, higher power usage, and potential system hang.
This is partly due to an odd behavior with the VStartup interrupt used
to signal DRM vblank events. If the OTG is toggled on/off during a PSR
link on/off cycle, the vstartup interrupt fires twice in quick
succession. This generates incorrectly timed vblank events.
Additionally, it can cause cursor updates to generate visual artifacts.
Note that this is not observed with PSR1 since PSR is fully disabled
when there are vblank event requestors. Cursor updates are also
artifact-free, likely because there are no selectively-updated (SU)
frames that can generate artifacts.
[How]
A potential solution is to disable z10 idle optimizations only when fast
updates (flips & cursor updates) are committed. A mechanism to do so
would require some thoughtful design. Let's just disable idle
optimizations for PSR2 for now.
Fixes: e7351772374b ("drm/amd/display: Implement MPO PSR SU") Reported-by: August Wikerfors <git@augustwikerfors.se> Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/ Tested-by: August Wikerfors <git@augustwikerfors.se> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
perf tests record: Fail the test if the 'errs' counter is not zero
We were just checking for the 'err' variable, when we should really see
if there was some of the many checked errors that don't stop the test
right away.
Detected with clang 15.0.0:
44 75.23 fedora:37 : FAIL clang version 15.0.0 (Fedora 15.0.0-2.fc37)
tests/perf-record.c:68:16: error: variable 'errs' set but not used [-Werror,-Wunused-but-set-variable]
int err = -1, errs = 0, i, wakeups = 0;
^
1 error generated.
The patch introducing this 'perf test' entry had that check:
Fixes: 2d5e9d931c8234e2 ("perf test: Use skip in PERF_RECORD_*") Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YzR0n5QhsH9VyYB0@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test: Fix test case 87 ("perf record tests") for hybrid systems
The test case 87 ("perf record tests") failed on hybrid systems,the event
"cpu/br_inst_retired.near_call/p" is only for non-hybrid system. Correct
the test event to support both non-hybrid and hybrid systems.
Before:
# ./perf test 87
87: perf record tests : FAILED!
After:
# ./perf test 87
87: perf record tests : Ok
Fixes: 93242038f2fe3f83 ("perf test: Add basic perf record tests") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220927051513.3768717-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
Merge tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some trivial fixes and cleanup"
* tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Clean up loongson3_smp_ops declaration
LoongArch: Fix and cleanup csr_era handling in do_ri()
LoongArch: Align the address of kernel_entry to 4KB
LoongArch: Fix and cleanup csr_era handling in do_ri()
We don't emulate reserved instructions and just send a signal to the
current process now. So we don't need to call compute_return_era() to
add 4 (point to the next instruction) to csr_era in pt_regs. RA/ERA's
backup/restore is cleaned up as well.
Signed-off-by: Jun Yi <yijun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.
While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.
This can be reproduced easily with following steps:
1. create 2 namespace and veth:
$ ip netns add mptcp-client
$ ip netns add mptcp-server
$ sysctl -w net.ipv4.conf.all.rp_filter=0
$ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
$ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
$ ip link add red-client netns mptcp-client type veth peer red-server \
netns mptcp-server
$ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
$ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
$ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
$ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
$ ip -n mptcp-server link set red-server up
$ ip -n mptcp-client link set red-client up
2. configure the endpoint and limit for client and server:
$ ip -n mptcp-server mptcp endpoint flush
$ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint flush
$ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
1 subflow
3. listen and accept on a port, such as 9999. The nc command we used
here is modified, which makes it use mptcp protocol by default.
$ ip netns exec mptcp-server nc -l -k -p 9999
4. open another *two* terminal and use each of them to connect to the
server with the following command:
$ ip netns exec mptcp-client nc 10.0.0.1 9999
Input something after connect to trigger the connection of the second
subflow. So that there are two established mptcp connections, with the
second one still unaccepted.
5. exit all the nc command, and check the tcp socket in server namespace.
And you will find that there is one tcp socket in CLOSE_WAIT state
and can't release forever.
Fix this by closing all of the unaccepted mptcp socket in
mptcp_subflow_queue_clean() with __mptcp_close().
Now, we can ensure that all unaccepted mptcp sockets will be cleaned by
__mptcp_close() before they are released, so mptcp_sock_destruct(), which
is used to clean the unaccepted mptcp socket, is not needed anymore.
The selftests for mptcp is ran for this commit, and no new failures.
Fixes: 2c14519745b2 ("mptcp: Add handling of incoming MP_JOIN requests") Fixes: d7dd78e66bd2 ("mptcp: fix race on unaccepted mptcp sockets") Cc: stable@vger.kernel.org Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Mengen Sun <mengensun@tencent.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp: factor out __mptcp_close() without socket lock
Factor out __mptcp_close() from mptcp_close(). The caller of
__mptcp_close() should hold the socket lock, and cancel mptcp work when
__mptcp_close() returns true.
This function will be used in the next commit.
Fixes: 2c14519745b2 ("mptcp: Add handling of incoming MP_JOIN requests") Fixes: d7dd78e66bd2 ("mptcp: fix race on unaccepted mptcp sockets") Cc: stable@vger.kernel.org Reviewed-by: Jiang Biao <benbjiang@tencent.com> Reviewed-by: Mengen Sun <mengensun@tencent.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 29 Sep 2022 02:04:43 +0000 (19:04 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ice: xsk: ZC changes
Maciej Fijalkowski says:
This set consists of two fixes to issues that were either pointed out on
indirectly (John was reviewing AF_XDP selftests that were testing ice's
ZC support) mailing list or were directly reported by customers.
First patch allows user space to see done descriptor in CQ even after a
single frame being transmitted and second patch removes the need for
having HW rings sized to power of 2 number of descriptors when used
against AF_XDP.
I also forgot to mention that due to the current Tx cleaning algorithm,
4k HW ring was broken and these two patches bring it back to life, so we
kill two birds with one stone.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
====================
Vladimir Oltean [Tue, 27 Sep 2022 12:20:42 +0000 (15:20 +0300)]
net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge
Currently the following set of commands fails:
$ ip link add br0 type bridge # vlan_filtering 0
$ ip link set swp0 master br0
$ bridge vlan
port vlan-id
swp0 1 PVID Egress Untagged
$ bridge vlan add dev swp0 vid 10
Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs.
Dumping ocelot->vlans, one can see that the 2 egress-untagged VLANs on swp0 are
vid 1 (the bridge PVID) and vid 4094, a PVID used privately by the driver for
VLAN-unaware bridging. So this is why bridge vid 10 is refused, despite
'bridge vlan' showing a single egress untagged VLAN.
As mentioned in the comment added, having this private VLAN does not impose
restrictions to the hardware configuration, yet it is a bookkeeping problem.
There are 2 possible solutions.
One is to make the functions that operate on VLAN-unaware pvids:
- ocelot_add_vlan_unaware_pvid()
- ocelot_del_vlan_unaware_pvid()
- ocelot_port_setup_dsa_8021q_cpu()
- ocelot_port_teardown_dsa_8021q_cpu()
call something different than ocelot_vlan_member_(add|del)(), the latter being
the real problem, because it allocates a struct ocelot_bridge_vlan *vlan which
it adds to ocelot->vlans. We don't really *need* the private VLANs in
ocelot->vlans, it's just that we have the extra convenience of having the
vlan->portmask cached in software (whereas without these structures, we'd have
to create a raw ocelot_vlant_rmw_mask() procedure which reads back the current
port mask from hardware).
The other solution is to filter out the private VLANs from
ocelot_port_num_untagged_vlans(), since they aren't what callers care about.
We only need to do this to the mentioned function and not to
ocelot_port_num_tagged_vlans(), because private VLANs are never egress-tagged.
Nothing else seems to be broken in either solution, but the first one requires
more rework which will conflict with the net-next change 36a0bf443585 ("net:
mscc: ocelot: set up tag_8021q CPU ports independent of user port affinity"),
and I'd like to avoid that. So go with the other one.
Peng Fan [Tue, 30 Aug 2022 03:31:31 +0000 (11:31 +0800)]
clk: imx93: drop of_match_ptr
There is build warning when CONFIG_OF is not selected.
>> drivers/clk/imx/clk-imx93.c:324:34: warning: 'imx93_clk_of_match'
>> defined but not used [-Wunused-const-variable=]
324 | static const struct of_device_id imx93_clk_of_match[] = {
| ^~~~~~~~~~~~~~~~~~
The driver only support DT table, no sense to use of_match_ptr.
Fixes: ba9fcf8ae1ce ("clk: imx: add i.MX93 clk") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220830033137.4149542-3-peng.fan@oss.nxp.com Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
clk: iproc: Do not rely on node name for correct PLL setup
After commit 4f9987076450 ("ARM: dts: BCM5301X: update CRU block
description") a warning from clk-iproc-pll.c was generated due to a
duplicate PLL name as well as the console stopped working. Upon closer
inspection it became clear that iproc_pll_clk_setup() used the Device
Tree node unit name as an unique identifier as well as a parent name to
parent all clocks under the PLL.
BCM5301X was the first platform on which that got noticed because of the
DT node unit name renaming but the same assumptions hold true for any
user of the iproc_pll_clk_setup() function.
The first 'clock-output-names' property is always guaranteed to be
unique as well as providing the actual desired PLL clock name, so we
utilize that to register the PLL and as a parent name of all children
clock.
Stefan reports that there are issues with the level triggered
notification. Since we're late in the cycle, and it was introduced for
the 6.0 release, just disable it at prep time and we can bring this
back when Samba is happy with it.
Reported-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 2158f5d481df ("clk: sunxi-ng: sun50i: h6: Modify GPU clock
configuration to support DFS") divider M0 was forced to be 1 in order to
support DFS. However, that left N as it is, at high value of 36. On
boards without devfreq enabled (all of them in kernel 6.0), this
effectively sets GPU frequency to 864 MHz. This is about 100 MHz above
maximum supported frequency.
In order to fix this, let's set N to 18 (register value 17). That way
default frequency of 432 MHz is preserved.
Ashutosh Dixit [Wed, 28 Sep 2022 19:02:12 +0000 (12:02 -0700)]
drm/i915/gt: Perf_limit_reasons are only available for Gen11+
Register GT0_PERF_LIMIT_REASONS (0x1381a8) is available only for
Gen11+. Therefore ensure perf_limit_reasons sysfs files are created only
for Gen11+. Otherwise on Gen < 5 accessing these files results in the
following oops:
<1> [88.829420] BUG: unable to handle page fault for address: ffffc90000bb81a8
<1> [88.829438] #PF: supervisor read access in kernel mode
<1> [88.829447] #PF: error_code(0x0000) - not-present page
This patch is a backport of the drm-tip commit 0d2d201095e9
("drm/i915: Perf_limit_reasons are only available for Gen11+") to
drm-intel-fixes. The backport is not identical to the original, it only
includes the sysfs portions of if. The debugfs portion is not available
in drm-intel-fixes so has not been backported.
Han Xu [Thu, 15 Sep 2022 15:09:59 +0000 (10:09 -0500)]
clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag
should not be used. For instance, the default parent clock for QSPI is
pll2_bus, which is also the parent clock for quite a few modules, such
as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system
hang due to pll2_bus rate changed.
Fixes: 696d0798f6c6 ("clk: imx6sx: Switch to clk_hw based API") Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com Tested-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more irqchip fixes from Borislav Petkov:
"More irqchip fixes for 6.0 from Marc Zyngier. Stuff got left hanging
due to the whole Plumbers and vacations commotion.
- A couple of configuration fixes for the recently merged Loongarch
drivers
- A fix to avoid dynamic allocation of a cpumask which was causing
issues with PREEMPT_RT and the GICv3 ITS
- A tightening of an error check in the stm32 exti driver"
* tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-pch-lpc: Add dependence on LoongArch
irqchip: Select downstream irqchip drivers for LoongArch CPU
irqchip/gic-v3-its: Remove cpumask_var_t allocation
irqchip/stm32-exti: Remove check on always false condition
Merge tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes. This time there is also a fix for the ARM SCMI
firmware driver, which has been acked by Sudeep Holla, the maintainer.
MMC core:
- Terminate infinite loop in SD-UHS voltage switch
MMC host:
- hsq: Fix kernel crash in the recovery path
- moxart: Fix bus width configurations
- sdhci: Fix kernel panic for cqe irq
ARM_SCMI:
- Fixup clock management by reverting 'firmware: arm_scmi: Add clock
management to the SCMI power domain'"
* tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: hsq: Fix data stomping during mmc recovery
Revert "firmware: arm_scmi: Add clock management to the SCMI power domain"
mmc: core: Terminate infinite loop in SD-UHS voltage switch
mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
mmc: sdhci: Fix host->cmd is null
Al Viro [Mon, 26 Sep 2022 15:59:14 +0000 (11:59 -0400)]
[coredump] don't use __kernel_write() on kmap_local_page()
passing kmap_local_page() result to __kernel_write() is unsafe -
random ->write_iter() might (and 9p one does) get unhappy when
passed ITER_KVEC with pointer that came from kmap_local_page().
Fix by providing a variant of __kernel_write() that takes an iov_iter
from caller (__kernel_write() becomes a trivial wrapper) and adding
dump_emit_page() that parallels dump_emit(), except that instead of
__kernel_write() it uses __kernel_write_iter() with ITER_BVEC source.
Fixes: deb7e7827a11 "fs/coredump: use kmap_local_page()" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stephen Boyd [Wed, 28 Sep 2022 17:52:14 +0000 (10:52 -0700)]
Merge tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into clk-fixes
Pull Microchip clock fixes for Polarfire SoCs:
- fix panic at boot in clock initialization when building with clang-15
- make RTC's AHB clock critical as rtc will stop if the AHB
interface clock is disabled
* tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: microchip: mpfs: make the rtc's ahb clock critical
clk: microchip: mpfs: fix clk_cfg array bounds violation
Jakub Kicinski [Wed, 28 Sep 2022 17:48:38 +0000 (10:48 -0700)]
Merge tag 'linux-can-fixes-for-6.0-20220928' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-09-28
The patch is by me and targets the c_can driver. It disables an
optimization in the TX path of C_CAN cores which causes problems.
* tag 'linux-can-fixes-for-6.0-20220928' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: c_can: don't cache TX messages for C_CAN cores
====================
Borislav Petkov [Fri, 19 Aug 2022 17:47:44 +0000 (19:47 +0200)]
x86/cacheinfo: Add a cpu_llc_shared_mask() UP variant
On a CONFIG_SMP=n kernel, the LLC shared mask is 0, which prevents
__cache_amd_cpumap_setup() from doing the L3 masks setup, and more
specifically from setting up the shared_cpu_map and shared_cpu_list
files in sysfs, leading to lscpu from util-linux getting confused and
segfaulting.
Add a cpu_llc_shared_mask() UP variant which returns a mask with a
single bit set, i.e., for CPU0.
Anatoly Pugachev reported that the commit 88ce225c2fe9 ("net: set proper
memcg for net_init hooks allocations") is somehow causing the sparc64
VMs failed to boot and the VMs boot fine with that patch reverted. So,
revert the patch for now and later we can debug the issue.
Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/ Reported-by: Anatoly Pugachev <matorola@gmail.com> Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Vasily Averin <vvs@openvz.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: cgroups@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-kernel@vger.kernel.org Tested-by: Anatoly Pugachev <matorola@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Fixes: 88ce225c2fe9 ("net: set proper memcg for net_init hooks allocations") Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
perf arm-spe: augment the data source type with neoverse_spe list
When synthesizing event with SPE data source, commit 9498847adffb("perf
arm-spe: Use SPE data source for neoverse cores") augment the type with
source information by MIDR. However, is_midr_in_range only compares the
first entry in neoverse_spe.
Change is_midr_in_range to is_midr_in_range_list to traverse the
neoverse_spe array so that all neoverse cores synthesize event with data
source packet.
Fixes: 9498847adffb0387 ("perf arm-spe: Use SPE data source for neoverse cores") Reviewed-by: Ali Saidi <alisaidi@amazon.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shuai Xue <xueshuai@linux.alibaba.com> Cc: Timothy Hayes <timothy.hayes@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zhuo Song <zhuo.song@linux.alibaba.com> Link: https://lore.kernel.org/r/1664197396-42672-1-git-send-email-renyu.zj@linux.alibaba.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tests vmlinux-kallsyms: Update is_ignored_symbol function to match the kernel ignored list
The testcase “vmlinux-kallsyms.c” fails in powerpc.
vmlinux symtab matches kallsyms: FAILED!
This test look at the symbols in the vmlinux DSO and check if we find
all of them in the kallsyms dso.
But from the powerpc logs , observed that the failure happens for:
ERR : 0xc0000000000fe9c8: .Lmfspr_table not on kallsyms
ERR : 0xc0000000001009c8: .Lmtspr_table not on kallsyms
These are labels ( with .L) in the source code and has to be ignored.
Reference code with .Lmtspr_table: arch/powerpc/xmon/spr_access.S
The testcases invokes is_ignored_symbol() function to ignore hidden
symbols in the dso like local symbols. This function is adapted from
is_ignored_symbol() kernel function in code: scripts/kallsyms.c . The
kernel function got some updates which is not reflected in the testcase
function and the new updates also handles ignoring "labels".
Below is the changes that went in the kernel function.
/* Symbol names that begin with the following are ignored.*/
static const char * const ignored_prefixes[] = {
"$", /* local symbols for ARM, MIPS, etc. */
- ".LASANPC", /* s390 kasan local symbols */
+ ".L", /* local labels, .LBB,.Ltmpxxx,.L__unnamed_xx,.LASANPC, etc. */
"__crc_", /* modversions */
"__efistub_", /* arm64 EFI stub namespace */
- "__kvm_nvhe_", /* arm64 non-VHE KVM namespace */
+ "__kvm_nvhe_$", /* arm64 local symbols in non-VHE KVM namespace */
+ "__kvm_nvhe_.L", /* arm64 local symbols in non-VHE KVM namespace */
"__AArch64ADRPThunk_", /* arm64 lld */
"__ARMV5PILongThunk_", /* arm lld */
"__ARMV7PILongThunk_",
This change is part of below commits and will handle the
symbols with “.L”
commit 243da6618cdf ("kallsyms: ignore all local labels prefixed by '.L'")
commit 182cdbef2429 ("KVM: arm64: Symbolize the nVHE HYP addresses")
Update the testcase function to include the new changes.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220928045218.37322-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Damien Le Moal [Sat, 24 Sep 2022 06:18:26 +0000 (15:18 +0900)]
ata: libata-sata: Fix device queue depth control
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: John Garry <john.garry@huawei.com>
Damien Le Moal [Sat, 24 Sep 2022 05:44:11 +0000 (14:44 +0900)]
ata: libata-scsi: Fix initialization of device queue depth
For SATA devices supporting NCQ, drivers using libsas first initialize a
scsi device queue depth based on the controller and device capabilities,
leading to the scsi device queue_depth field being 32 (ATA maximum queue
depth) for most setup. However, if libata was loaded using the
force=[ID]]noncq argument, the default queue depth should be set to 1 to
reflect the fact that queuable commands will never be used. This is
consistent with manually setting a device queue depth to 1 through sysfs
as that disables NCQ use for the device.
Fix ata_scsi_dev_config() to honor the noncq parameter by sertting the
device queue depth to 1 for devices that do not have the ATA_DFLAG_NCQ
flag set.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: John Garry <john.garry@huawei.com>
can: c_can: don't cache TX messages for C_CAN cores
As Jacob noticed, the optimization introduced in a6974a30438a ("can:
c_can: cache frames to operate as a true FIFO") doesn't properly work
on C_CAN, but on D_CAN IP cores. The exact reasons are still unknown.
For now disable caching if CAN frames in the TX path for C_CAN cores.
Merge tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
Eli Cohen [Mon, 12 Sep 2022 12:50:19 +0000 (15:50 +0300)]
vdpa/mlx5: Fix MQ to support non power of two num queues
RQT objects require that a power of two value be configured for both
rqt_max_size and rqt_actual size.
For create_rqt, make sure to round up to the power of two the value of
given by the user who created the vdpa device and given by
ndev->rqt_size. The actual size is also rounded up to the power of two
using the current number of VQs given by ndev->cur_num_vqs.
Same goes with modify_rqt where we need to make sure act size is power
of two based on the new number of QPs.
Without this patch, attempt to create a device with non power of two QPs
would result in error from firmware.
Fixes: 6a924a9ecf3d ("vdpa/mlx5: Add multiqueue support") Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220912125019.833708-1-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
projects / kernel.git / log