The wrong bits are masked in the hysteresis register; indices 0 and 2
should zero bits [7:4] and preserve bits [3:0], and index 1 should zero
bits [3:0] and preserve bits [7:4].
Fixes: 9710f8bd109c ("hwmon: Add a driver for the ADT7475 hardware monitoring chip") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230222005228.158661-3-tony.obrien@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Throughout the ADT7475 driver, attributes relating to the temperature
sensors are displayed in the order Remote 1, Local, Remote 2. Make
temp_st_show() conform to this expectation so that values set by
temp_st_store() can be displayed using the correct attribute.
iucv_irq_data needs to be 4 bytes larger.
These bytes are not used by the iucv module, but written by
the z/VM hypervisor in case a CPU is deconfigured.
Reported as:
BUG dma-kmalloc-64 (Not tainted): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
0x0000000000400564-0x0000000000400567 @offset=1380. First byte 0x80 instead of 0xcc
Allocated in iucv_cpu_prepare+0x44/0xd0 age=167839 cpu=2 pid=1
__kmem_cache_alloc_node+0x166/0x450
kmalloc_node_trace+0x3a/0x70
iucv_cpu_prepare+0x44/0xd0
cpuhp_invoke_callback+0x156/0x2f0
cpuhp_issue_call+0xf0/0x298
__cpuhp_setup_state_cpuslocked+0x136/0x338
__cpuhp_setup_state+0xf4/0x288
iucv_init+0xf4/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Freed in iucv_init+0x92/0x280 age=167839 cpu=2 pid=1
__kmem_cache_free+0x308/0x358
iucv_init+0x92/0x280
do_one_initcall+0x78/0x390
do_initcalls+0x11a/0x140
kernel_init_freeable+0x25e/0x2a0
kernel_init+0x2e/0x170
__ret_from_fork+0x3c/0x58
ret_from_fork+0xa/0x40
Slab 0x0000037200010000 objects=32 used=30 fp=0x0000000000400640 flags=0x1ffff00000010200(slab|head|node=0|zone=0|
Object 0x0000000000400540 @offset=1344 fp=0x0000000000000000
Redzone 0000000000400500: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400510: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400520: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400530: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 0000000000400540: 00 01 00 03 00 00 00 00 00 00 00 00 00 00 00 00 ................
Object 0000000000400550: f3 86 81 f2 f4 82 f8 82 f0 f0 f0 f0 f0 f0 f0 f2 ................
Object 0000000000400560: 00 00 00 00 80 00 00 00 cc cc cc cc cc cc cc cc ................
Object 0000000000400570: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 0000000000400580: cc cc cc cc cc cc cc cc ........
Padding 00000000004005d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 00000000004005e4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
Padding 00000000004005f4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
CPU: 6 PID: 121030 Comm: 116-pai-crypto. Not tainted 6.3.0-20230221.rc0.git4.99b8246b2d71.300.fc37.s390x+debug #1
Hardware name: IBM 3931 A01 704 (z/VM 7.3.0)
Call Trace:
[<000000032aa034ec>] dump_stack_lvl+0xac/0x100
[<0000000329f5a6cc>] check_bytes_and_report+0x104/0x140
[<0000000329f5aa78>] check_object+0x370/0x3c0
[<0000000329f5ede6>] free_debug_processing+0x15e/0x348
[<0000000329f5f06a>] free_to_partial_list+0x9a/0x2f0
[<0000000329f5f4a4>] __slab_free+0x1e4/0x3a8
[<0000000329f61768>] __kmem_cache_free+0x308/0x358
[<000000032a91465c>] iucv_cpu_dead+0x6c/0x88
[<0000000329c2fc66>] cpuhp_invoke_callback+0x156/0x2f0
[<000000032aa062da>] _cpu_down.constprop.0+0x22a/0x5e0
[<0000000329c3243e>] cpu_device_down+0x4e/0x78
[<000000032a61dee0>] device_offline+0xc8/0x118
[<000000032a61e048>] online_store+0x60/0xe0
[<000000032a08b6b0>] kernfs_fop_write_iter+0x150/0x1e8
[<0000000329fab65c>] vfs_write+0x174/0x360
[<0000000329fab9fc>] ksys_write+0x74/0x100
[<000000032aa03a5a>] __do_syscall+0x1da/0x208
[<000000032aa177b2>] system_call+0x82/0xb0
INFO: lockdep is turned off.
FIX dma-kmalloc-64: Restoring kmalloc Redzone 0x0000000000400564-0x0000000000400567=0xcc
FIX dma-kmalloc-64: Object at 0x0000000000400540 not freed
Fixes: 711b3886e693 ("[S390]: Rewrite of the IUCV base code, part 2") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20230315131435.4113889-1-wintera@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Packet length check needs to be located after size and align_count
calculation to prevent kernel panic in skb_pull() in case
rx_cmd_a & RX_CMD_A_RED evaluates to true.
Commit 684c478bb28d ("ipv4: Fix incorrect route flushing when source
address is deleted") started to take the table ID field in the FIB info
structure into account when determining if two structures are identical
or not. This field is initialized using the 'fc_table' field in the
route configuration structure, which is not set when adding a route via
IOCTL.
The above can result in user space being able to install two identical
routes that only differ in the table ID field of their associated FIB
info.
Fix by initializing the table ID field in the route configuration
structure in the IOCTL path.
Before the fix:
# ip route add default via 192.0.2.2
# route add default gw 192.0.2.2
# ip -4 r show default
# default via 192.0.2.2 dev dummy10
# default via 192.0.2.2 dev dummy10
After the fix:
# ip route add default via 192.0.2.2
# route add default gw 192.0.2.2
SIOCADDRT: File exists
# ip -4 r show default
default via 192.0.2.2 dev dummy10
Audited the code paths to ensure there are no other paths that do not
properly initialize the route configuration structure when installing a
route.
Fixes: b9ef42ef6125 ("net: Don't delete routes in different VRFs") Fixes: 684c478bb28d ("ipv4: Fix incorrect route flushing when source address is deleted") Reported-by: gaoxingwang <gaoxingwang1@huawei.com> Link: https://lore.kernel.org/netdev/20230314144159.2354729-1-gaoxingwang1@huawei.com/ Tested-by: gaoxingwang <gaoxingwang1@huawei.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230315124009.4015212-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
An nvme target ->queue_response() operation implementation may free the
request passed as argument. Such implementation potentially could result
in a use after free of the request pointer when percpu_ref_put() is
called in nvmet_req_complete().
Avoid such problem by using a local variable to save the sq pointer
before calling __nvmet_req_complete(), thus avoiding dereferencing the
req pointer after that function call.
Fixes: ffb9618ad11f ("nvmet: add a generic NVMe target") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Packet length retrieved from skb data may be larger than
the actual socket buffer length (up to 9026 bytes). In such
case the cloned skb passed up the network stack will leak
kernel memory contents.
Fixes: 1f4fa502fc00 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If genphy_read_status fails then further access to the PHY may result
in unpredictable behavior. To prevent this bail out immediately if
genphy_read_status fails.
Fixes: 1dab61124363 ("net: phy: smsc: Re-enable EDPD mode for LAN87xx") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 2379 Comm: kworker/0:0 Not tainted 6.3.0-rc1-syzkaller-00002-g8ca09d5fa354-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
Workqueue: mld mld_ifc_work
Previously we would divide total_left_rate by zero if num_vports
happened to be 1 because non_requested_count is calculated as
num_vports - req_count. Guard against this by validating num_vports at
the beginning and returning an error otherwise.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
If the driver detects during probe that firmware is in recovery
mode then i40e_init_recovery_mode() is called and the rest of
probe function is skipped including pci_set_drvdata(). Subsequent
i40e_shutdown() called during shutdown/reboot dereferences NULL
pointer as pci_get_drvdata() returns NULL.
To fix call pci_set_drvdata() also during entering to recovery mode.
Reproducer:
1) Lets have i40e NIC with firmware in recovery mode
2) Run reboot
For l3s mode, skb->dev is set to ipvlan interface in ipvlan_nf_input():
skb->dev = addr->master->dev
but, skb->skb_iif remain unchanged, this will cause socket lookup failed
if a target socket is bound to a interface, like the following example:
ip link add ipvlan0 link eth0 type ipvlan mode l3s
ip addr add dev ipvlan0 192.168.124.111/24
ip link set ipvlan0 up
ping -c 1 -I ipvlan0 8.8.8.8
100% packet loss
This is because there is no match sk in __raw_v4_lookup() as sk->sk_bound_dev_if != dif(skb->skb_iif).
Fix this by make skb->skb_iif track skb->dev in ipvlan_nf_input().
Fixes: 59a4e9c06fe1 ("ipvlan: decouple l3s mode dependencies from other modes") Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/29865b1f-6db7-c07a-de89-949d3721ea30@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
struct pn533_out_arg used as a temporary context for out_urb is not
initialized properly. Its uninitialized 'phy' field can be dereferenced in
error cases inside pn533_out_complete() callback function. It causes the
following failure:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441
Call Trace:
<IRQ>
__usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671
usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754
dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988
call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700
expire_timers+0x234/0x330 kernel/time/timer.c:1751
__run_timers kernel/time/timer.c:2022 [inline]
__run_timers kernel/time/timer.c:1995 [inline]
run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035
__do_softirq+0x1fb/0xaf6 kernel/softirq.c:571
invoke_softirq kernel/softirq.c:445 [inline]
__irq_exit_rcu+0x123/0x180 kernel/softirq.c:650
irq_exit_rcu+0x9/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107
Initialize the field with the pn533_usb_phy currently used.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9dab880d675b ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()") Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
tcp_rtx_synack() now could be called in process context as explained in 49fcad7fb3b9 ("tcp: tcp_rtx_synack() can be called from process
context").
tcp_rtx_synack() might call tcp_make_synack(), which will touch per-CPU
variables with preemption enabled. This causes the following BUG:
BUG: using __this_cpu_add() in preemptible [00000000] code: ThriftIO1/5464
caller is tcp_make_synack+0x841/0xac0
Call Trace:
<TASK>
dump_stack_lvl+0x10d/0x1a0
check_preemption_disabled+0x104/0x110
tcp_make_synack+0x841/0xac0
tcp_v6_send_synack+0x5c/0x450
tcp_rtx_synack+0xeb/0x1f0
inet_rtx_syn_ack+0x34/0x60
tcp_check_req+0x3af/0x9e0
tcp_rcv_state_process+0x59b/0x2030
tcp_v6_do_rcv+0x5f5/0x700
release_sock+0x3a/0xf0
tcp_sendmsg+0x33/0x40
____sys_sendmsg+0x2f2/0x490
__sys_sendmsg+0x184/0x230
do_syscall_64+0x3d/0x90
Avoid calling __TCP_INC_STATS() with will touch per-cpu variables. Use
TCP_INC_STATS() which is safe to be called from context switch.
Fixes: c627d7bd3489 ("tcp: TCP Fast Open Server - support TFO listeners") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230308190745.780221-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
scsi_proc_hostdir_rm() decreases a reference counter and hence must only be
called once per host that is removed. This change does not require a
scsi_add_host_with_dma() change since scsi_add_host_with_dma() will return
0 (success) if scsi_proc_host_add() is called.
Commit f0fc58cf49bb ("scsi: core: Avoid that ATA error handling can
trigger a kernel hang or oops") moved rcu to scsi_cmnd instead of
shost. Modify "shost->rcu" to "scmd->rcu" in a comment.
CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.
Update CONTROLLER_IN_GPU() so it matches only Intel devices.
Fixes: 6ab9beb9047e ("ALSA: hda - Abort the probe without i915 binding for HSW/B") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Port is allocated by sas_port_alloc_num() and rphy is allocated by either
sas_end_device_alloc() or sas_expander_alloc(), all of which may return
NULL. So we need to check the rphy to avoid possible NULL pointer access.
If sas_rphy_add() returned with failure, rphy is set to NULL. We would
access the rphy in the following lines which would also result NULL pointer
access.
Fixes: 3ba756e7a02d ("scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()") Signed-off-by: Wenchao Hao <haowenchao2@huawei.com> Link: https://lore.kernel.org/r/20230225100135.2109330-1-haowenchao2@huawei.com Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: 7d426ee9e224 ("clk: enable hi655x common clk automatically") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Riku Voipio <riku.voipio@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230226053953.4681-3-rdunlap@infradead.org Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Playing media with a resolution smaller than the crtc size requires the
video overlay to be scaled for output and GXM boards display a 1px pink
line on the bottom of the scaled overlay. Comparing with the downstream
vendor driver revealed VPP_DUMMY_DATA not being set [0].
Setting VPP_DUMMY_DATA prevents the 1px pink line from being seen.
Lockdep warns about potential circular locking dependency of devfreq
with the fs_reclaim caused by immediate device suspension when mapping is
released by shrinker. Fix it by doing the suspension asynchronously.
xfrm state selectors are matched against the inner-most flow
which can be of any address family. Therefore middle states
in nested configurations need to carry a wildcard selector in
order to work at all.
However, this is currently forbidden for transport-mode states.
Fix this by removing the unnecessary check.
Fixes: 4701323acddc ("[IPSEC]: Rename mode to outer_mode and add inner_mode") Reported-by: David George <David.George@sophos.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), ext4 encrypts the
pagecache page into a bounce page, then writes the bounce page.
It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.
Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().
Fix crash with illegal operation exception in dasd_device_tasklet.
Commit 150f5aa427e6 ("s390/dasd: Prepare for additional path event handling")
renamed the verify_path function for ECKD but not for FBA and DIAG.
This leads to a panic when the path verification function is called for a
FBA or DIAG device.
Fix by defining a wrapper function for dasd_generic_verify_path().
With CONFIG_VIRTIO_UML=y, GNU ld < 2.36 fails to link UML vmlinux
(w/wo CONFIG_LD_SCRIPT_STATIC).
`.exit.text' referenced in section `.uml.exitcall.exit' of arch/um/drivers/virtio_uml.o: defined in discarded section `.exit.text' of arch/um/drivers/virtio_uml.o
collect2: error: ld returned 1 exit status
This fix is similar to the following commits:
- f16784fb4712 ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT")
- a494398bde27 ("s390: define RUNTIME_DISCARD_EXIT to fix link error
with GNU ld < 2.36")
- c1c551bebf92 ("sh: define RUNTIME_DISCARD_EXIT")
Fixes: fe15ce495a51 ("arch: fix broken BuildID for arm64 and riscv") Reported-by: SeongJae Park <sj@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: SeongJae Park <sj@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sh vmlinux fails to link with GNU ld < 2.40 (likely < 2.36) since
commit fe15ce495a51 ("arch: fix broken BuildID for arm64 and riscv").
This is similar to fixes for powerpc and s390:
commit f16784fb4712 ("powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT").
commit a494398bde27 ("s390: define RUNTIME_DISCARD_EXIT to fix link error
with GNU ld < 2.36").
$ sh4-linux-gnu-ld --version | head -n1
GNU ld (GNU Binutils for Debian) 2.35.2
$ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu- microdev_defconfig
$ make ARCH=sh CROSS_COMPILE=sh4-linux-gnu-
`.exit.text' referenced in section `__bug_table' of crypto/algboss.o:
defined in discarded section `.exit.text' of crypto/algboss.o
`.exit.text' referenced in section `__bug_table' of
drivers/char/hw_random/core.o: defined in discarded section
`.exit.text' of drivers/char/hw_random/core.o
make[2]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make[1]: *** [Makefile:1252: vmlinux] Error 2
arch/sh/kernel/vmlinux.lds.S keeps EXIT_TEXT:
/*
* .exit.text is discarded at runtime, not link time, to deal with
* references from __bug_table
*/
.exit.text : AT(ADDR(.exit.text)) { EXIT_TEXT }
However, EXIT_TEXT is thrown away by
DISCARD(include/asm-generic/vmlinux.lds.h) because
sh does not define RUNTIME_DISCARD_EXIT.
GNU ld 2.40 does not have this issue and builds fine.
This corresponds with Masahiro's comments in a494398bde27:
"Nathan [Chancellor] also found that binutils
commit 21401fc7bf67 ("Duplicate output sections in scripts") cured this
issue, so we cannot reproduce it with binutils 2.36+, but it is better
to not rely on it."
Link: https://lkml.kernel.org/r/9166a8abdc0f979e50377e61780a4bba1dfa2f52.1674518464.git.tom.saeger@oracle.com Fixes: fe15ce495a51 ("arch: fix broken BuildID for arm64 and riscv") Link: https://lore.kernel.org/all/Y7Jal56f6UBh1abE@dev-arch.thelio-3990X/ Link: https://lore.kernel.org/all/20230123194218.47ssfzhrpnv3xfez@oracle.com/ Signed-off-by: Tom Saeger <tom.saeger@oracle.com> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Dennis Gilmore <dennis@ausil.us> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Palmer Dabbelt <palmer@rivosinc.com> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tom Saeger <tom.saeger@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor reports that the s390 vmlinux fails to link with
GNU ld < 2.36 since commit fe15ce495a51 ("arch: fix broken BuildID
for arm64 and riscv").
It happens for defconfig, or more specifically for CONFIG_EXPOLINE=y.
$ s390x-linux-gnu-ld --version | head -n1
GNU ld (GNU Binutils for Debian) 2.35.2
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- allnoconfig
$ ./scripts/config -e CONFIG_EXPOLINE
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- olddefconfig
$ make -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu-
`.exit.text' referenced in section `.s390_return_reg' of drivers/base/dd.o: defined in discarded section `.exit.text' of drivers/base/dd.o
make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
make: *** [Makefile:1252: vmlinux] Error 2
arch/s390/kernel/vmlinux.lds.S wants to keep EXIT_TEXT:
.exit.text : {
EXIT_TEXT
}
But, at the same time, EXIT_TEXT is thrown away by DISCARD because
s390 does not define RUNTIME_DISCARD_EXIT.
I still do not understand why the latter wins after fe15ce495a51,
but defining RUNTIME_DISCARD_EXIT seems correct because the comment
line in arch/s390/kernel/vmlinux.lds.S says:
/*
* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
*/
Nathan also found that binutils commit 21401fc7bf67 ("Duplicate output
sections in scripts") cured this issue, so we cannot reproduce it with
binutils 2.36+, but it is better to not rely on it.
Relocatable kernels must not discard relocations, they need to be
processed at runtime. As such they are included for CONFIG_RELOCATABLE
builds in the powerpc linker script (line 340).
However they are also unconditionally discarded later in the
script (line 414). Previously that worked because the earlier inclusion
superseded the discard.
However commit fe15ce495a51 ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 137). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier, causing .rela* to
actually be discarded at link time, leading to build warnings and a
kernel that doesn't boot:
The powerpc linker script explicitly includes .exit.text, because
otherwise the link fails due to references from __bug_table and
__ex_table. The code is freed (discarded) at runtime along with
.init.text and data.
That has worked in the past despite powerpc not defining
RUNTIME_DISCARD_EXIT because DISCARDS appears late in the powerpc linker
script (line 410), and the explicit inclusion of .exit.text
earlier (line 280) supersedes the discard.
However commit fe15ce495a51 ("arch: fix broken BuildID for arm64 and
riscv") introduced an earlier use of DISCARD as part of the RO_DATA
macro (line 136). With binutils < 2.36 that causes the DISCARD
directives later in the script to be applied earlier [1], causing
.exit.text to actually be discarded at link time, leading to build
errors:
'.exit.text' referenced in section '__bug_table' of crypto/algboss.o: defined in
discarded section '.exit.text' of crypto/algboss.o
'.exit.text' referenced in section '__ex_table' of drivers/nvdimm/core.o: defined in
discarded section '.exit.text' of drivers/nvdimm/core.o
Fix it by defining RUNTIME_DISCARD_EXIT, which causes the generic
DISCARDS macro to not include .exit.text at all.
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 47547576d4c3 ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 72506fddc7f8 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/ Fixes: 47547576d4c3 ("arm64: remove special treatment for the link order of head.o") Fixes: 72506fddc7f8 ("riscv: remove special treatment for the link order of head.o") Reported-by: Dennis Gilmore <dennis@ausil.us> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
[Tom: stable backport 5.15.y, 5.10.y, 5.4.y]
Though the above "Fixes:" commits are not in this kernel, the conditions
which lead to a missing Build ID in arm64 vmlinux are similar.
Evidence points to these conditions:
1. ld version > 2.36 (exact binutils commit documented in a494398bde27)
2. first object which gets linked (head.o) has a PROGBITS .note.GNU-stack segment
These conditions can be observed when:
- 5.15.60+ OR 5.10.136+ OR 5.4.210+
- AND ld version > 2.36
- AND arch=arm64
- AND CONFIG_MODVERSIONS=y
There are notable differences in the vmlinux elf files produced
before(bad) and after(good) applying this series.
Good: p_type:PT_NOTE segment exists.
Bad: p_type:PT_NOTE segment is missing.
Good: sh_name_str:.notes section has sh_type:SHT_NOTE
Bad: sh_name_str:.notes section has sh_type:SHT_PROGBITS
`readelf -n` (as of v2.40) searches for Build Id
by processing only the very first note in sh_type:SHT_NOTE sections.
This was previously bisected to the stable backport of 1ccae403d960.
Follow-up experiments were discussed here: https://lore.kernel.org/all/20221221235413.xaisboqmr7dkqwn6@oracle.com/
which strongly hints at condition 2. Signed-off-by: Tom Saeger <tom.saeger@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the x86 kernel, .exit.text and .exit.data sections are discarded at
runtime, not by the linker. Add RUNTIME_DISCARD_EXIT to generic DISCARDS
and define it in the x86 kernel linker script to keep them.
The sections are added before the DISCARD directive so document here
only the situation explicitly as this change doesn't have any effect on
the generated kernel. Also, other architectures like ARM64 will use it
too so generalize the approach with the RUNTIME_DISCARD_EXIT define.
Direction from hardware is that ring buffers should never be mapped
via the BAR on systems with LLC. There are too many caching pitfalls
due to the way BAR accesses are routed. So it is safest to just not
use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Fixes: a9ab7be3b7ce ("drm/i915: Allow ringbuffers to be bound anywhere") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.9+ Tested-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-3-John.C.Harrison@Intel.com
(cherry picked from commit 65c08339db1ada87afd6cfe7db8e60bb4851d919) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
You will get two decrements when the messages on a panic are sent, not
one, since commit d4852151ce35 ("ipmi: Free receive messages when in an
oops") was added, but the watchdog code had a bug where it didn't set
the value properly.
Reported-by: Anton Lundin <glance@acc.umu.se> Cc: <Stable@vger.kernel.org> # v5.4+ Fixes: d4852151ce35 ("ipmi: Free receive messages when in an oops") Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gain control is badly documented in publicly available (including
leaked) documentation.
There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value
(plus an enable bit in bit 6). The driver hardcodes it to 0x43, which
one application note states is equal to x1.047. The documentation also
states that 0x40 is equel to x1.000. The pre-gain thus seems to be
expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984.
What the pre-gain does is however unspecified.
There is then an AGC gain limit, in registers 0x3a18 and 0x3a19,
expressed as a 10-bit "real gain format" value. One application note
sets it to 0x00f8 and states it is equal to x15.5, so it appears to be
expressed in 1/16 increments, up to x63.9375.
The manual gain is stored in registers 0x350a and 0x350b, also as a
10-bit "real gain format" value. It is documented in the application
note as a Q6.4 values, up to x63.9375.
One version of the datasheet indicates that the sensor supports a
digital gain:
The OV5640 supports 1/2/4 digital gain. Normally, the gain is
controlled automatically by the automatic gain control (AGC) block.
It isn't clear how that would be controlled manually.
There appears to be no indication regarding whether the gain controlled
through registers 0x350a and 0x350b is an analogue gain only or also
includes digital gain. The words "real gain" don't necessarily mean
"combined analogue and digital gains". Some OmniVision sensors (such as
the OV8858) are documented as supoprting different formats for the gain
values, selectable through a register bit, and they are called "real
gain format" and "sensor gain format". For that sensor, we have (one of)
the gain registers documented as
0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are
fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain
If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse
gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1,
gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain,
0x70 is 4x gain
(The second part of the text makes little sense)
"Real gain" may thus refer to the combination of the coarse and fine
analogue gains as a single value.
The OV5640 0x350a and 0x350b registers thus appear to control analogue
gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific
control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it.
If registers 0x350a and 0x350b are later found to control digital gain
as well, the driver could then restrict the range of the analogue gain
control value to lower than x64 and add a separate digital gain control.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
lm->inited = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->fake_volts = 1;
^ ~
drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion]
pow->quadratic = 1;
^ ~
There is no bug here since no code checks the actual value of these
fields, just whether or not they are zero (boolean context), but this
can be easily fixed by switching to an unsigned type.
Previously, R_ALPHA_LITERAL relocations would overflow for large kernel
modules.
This was because the Alpha's apply_relocate_add was relying on the kernel's
module loader to have sorted the GOT towards the very end of the module as it
was mapped into memory in order to correctly assign the global pointer. While
this behavior would mostly work fine for small kernel modules, this approach
would overflow on kernel modules with large GOT's since the global pointer
would be very far away from the GOT, and thus, certain entries would be out of
range.
This patch fixes this by instead using the Tru64 behavior of assigning the
global pointer to be 32KB away from the start of the GOT. The change made
in this patch won't work for multi-GOT kernel modules as it makes the
assumption the module only has one GOT located at the beginning of .got,
although for the vast majority kernel modules, this should be fine. Of the
kernel modules that would previously result in a relocation error, none of
them, even modules like nouveau, have even come close to filling up a single
GOT, and they've all worked fine under this patch.
Signed-off-by: Edward Humes <aurxenon@lunos.org> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
arch/mips/include/asm/mach-rc32434/pci.h:377:
cc1: error: result of ‘-117440512 << 16’ requires 44 bits to represent, but ‘int’ only has 32 bits [-Werror=shift-overflow=]
All bits in KORINA_STAT are already at the correct position, so there is
no addtional shift needed.
As lockdep properly warns, we should not be locking i_rwsem while having
transactions started as the proper lock ordering used by all directory
handling operations is i_rwsem -> transaction start. Fix the lock
ordering by moving the locking of the directory earlier in
ext4_rename().
When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:
Before determining whether the msg has unsupported options, it has been
prematurely terminated by the wrong status check.
For the application, the general usages of MSG_FASTOPEN likes
fd = socket(...)
/* rather than connect */
sendto(fd, data, len, MSG_FASTOPEN)
Hence, We need to check the flag before state check, because the sock
state here is always SMC_INIT when applications tries MSG_FASTOPEN.
Once we found unsupported options, fallback it to TCP.
Fixes: ecf28acb843b ("net/smc: handle sockopts forcing fallback") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Signed-off-by: Simon Horman <simon.horman@corigine.com>
v2 -> v1: Optimize code style Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The firmware only supports Logical Disk IDs up to 240 and LD ID 255 (0xFF)
is reserved for deleted LDs. However, in some cases, firmware was assigning
LD ID 254 (0xFE) to deleted LDs and this was causing the driver to mark the
wrong disk as deleted. This in turn caused the wrong disk device to be
taken offline by the SCSI midlayer.
To address this issue, limit the LD ID range from 255 to 240. This ensures
the deleted LD ID is properly identified and removed by the driver without
accidently deleting any valid LDs.
Fixes: 4d5cbca6306a ("scsi: megaraid_sas: Early detection of VD deletion through RaidMap update") Reported-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com> Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Link: https://lore.kernel.org/r/20230302105342.34933-2-chandrakanth.patil@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.
if (!env_type_is_resolve_sink(env, var_type) &&
!env_type_is_resolved(env, var_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, var_type, var_type_id);
}
env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:
Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.
Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.
To summarise, the following conditions are necessary:
- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
TYPE_TAG
The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.
Fixes: 5cc8aa5eb834 ("bpf: kernel side support for BTF Var and DataSec") Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The xtables packet traverser performs an unconditional local_bh_disable(),
but the nf_tables evaluation loop does not.
Functions that are called from either xtables or nftables must assume
that they can be called in process context.
inet_twsk_deschedule_put() assumes that no softirq interrupt can occur.
If tproxy is used from nf_tables its possible that we'll deadlock
trying to aquire a lock already held in process context.
Add a small helper that takes care of this and use it.
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO)
completions on the aggregation ring. On P5 chips, the maximum number
of concurrent TPA is 256 and the amount of memory we allocate is order-5
on systems using 4K pages. Memory allocation failure has been reported:
Instead of allocating this big chunk of memory and dividing it up for the
concurrent TPA instances, allocate each small chunk separately for each
TPA instance. This will reduce it to order-0 allocations.
Fixes: 3ad87a400c64 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reported use-after-free in cfusbl_device_notify() [1]. This
causes a stack trace like below:
BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214
When unregistering a net device, unregister_netdevice_many_notify()
sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers
with NETDEV_UNREGISTER, and adds the device to the todo list.
Later on, devices in the todo list are processed by netdev_run_todo().
netdev_run_todo() waits devices' reference count become 1 while
rebdoadcasting NETDEV_UNREGISTER notification.
When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple
times, the parent device might be freed. This could cause UAF.
Processing NETDEV_UNREGISTER multiple times also causes inbalance of
reference count for the module.
This patch fixes the issue by accepting only first NETDEV_UNREGISTER
notification.
Move the LAN7800 internal phy (phy ID 0x0007c132) specific register
accesses to the phy driver (microchip.c).
Fix the error reported by Enguerrand de Ribaucourt in December 2022,
"Some operations during the cable switch workaround modify the register
LAN88XX_INT_MASK of the PHY. However, this register is specific to the
LAN8835 PHY. For instance, if a DP8322I PHY is connected to the LAN7801,
that register (0x19), corresponds to the LED and MAC address
configuration, resulting in unapropriate behavior."
I did not test with the DP8322I PHY, but I tested with an EVB-LAN7800
with the internal PHY.
Fixes: 09e8bf6570a4 ("lan78xx: workaround of forced 100 Full/Half duplex mode error") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230301154307.30438-1-yuiko.oshino@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/net/usb/lan78xx.c: In function ‘lan78xx_read_raw_otp’:
drivers/net/usb/lan78xx.c:825:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_write_raw_otp’:
drivers/net/usb/lan78xx.c:879:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_deferred_multicast_write’:
drivers/net/usb/lan78xx.c:1041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_update_flowcontrol’:
drivers/net/usb/lan78xx.c:1127:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_init_mac_address’:
drivers/net/usb/lan78xx.c:1666:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_link_status_change’:
drivers/net/usb/lan78xx.c:1841:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_irq_bus_sync_unlock’:
drivers/net/usb/lan78xx.c:1920:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan8835_fixup’:
drivers/net/usb/lan78xx.c:1994:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_rx_max_frame_length’:
drivers/net/usb/lan78xx.c:2192:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_change_mtu’:
drivers/net/usb/lan78xx.c:2270:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_mac_addr’:
drivers/net/usb/lan78xx.c:2299:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_features’:
drivers/net/usb/lan78xx.c:2333:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
drivers/net/usb/lan78xx.c: In function ‘lan78xx_set_suspend’:
drivers/net/usb/lan78xx.c:3807:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201102114512.1062724-25-lee.jones@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: e57cf3639c32 ("net: lan78xx: fix accessing the LAN7800's internal phy specific registers from the MAC driver") Signed-off-by: Sasha Levin <sashal@kernel.org>
The test_local_dnat_portonly() function initiates the client-side as
soon as it sets the listening side to the background. This could lead to
a race condition where the server may not be ready to listen. To ensure
that the server-side is up and running before initiating the
client-side, a delay is introduced to the test_local_dnat_portonly()
function.
Before the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-rthlYrBU can reach ns1-rthlYrBU and ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU was ip NATted to ns2-rthlYrBU
PASS: ping to ns1-rthlYrBU OK after ip nat output chain flush
PASS: ipv6 ping to ns1-rthlYrBU was ip6 NATted to ns2-rthlYrBU
2023/02/27 04:11:03 socat[6055] E connect(5, AF=2 10.0.1.99:2000, 16): Connection refused
ERROR: inet port rewrite
After the fix:
# ./nft_nat.sh
PASS: netns routing/connectivity: ns0-9sPJV6JJ can reach ns1-9sPJV6JJ and ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ was ip NATted to ns2-9sPJV6JJ
PASS: ping to ns1-9sPJV6JJ OK after ip nat output chain flush
PASS: ipv6 ping to ns1-9sPJV6JJ was ip6 NATted to ns2-9sPJV6JJ
PASS: inet port rewrite without l3 address
Fixes: a00bd5b5d626 ("netfilter: nat: really support inet nat without l3 address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 688bdaed3ad7 ("ila: Add generic ILA translation facility") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Rather than writing CP_PREEMPT_ENABLE_GLOBAL twice, follow the vendor
kernel and set CP_PREEMPT_ENABLE_LOCAL register instead. a5xx_submit()
will override it during submission, but let's get the sequence correct.
Fixes: 2ae99dd8e304 ("drm/msm: Implement preemption for A5XX targets") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/522638/ Link: https://lore.kernel.org/r/20230214020956.164473-2-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we are renaming a directory to a different directory, we need to
update '..' entry in the moved directory. However nothing prevents moved
directory from being modified and even converted from the inline format
to the normal format. When such race happens the rename code gets
confused and we crash. Fix the problem by locking the moved directory.
CC: stable@vger.kernel.org Fixes: 4f33f5947495 ("ext4: let ext4_rename handle inline dir") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230126112221.11866-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove the /proc/scsi/${proc_name} directory earlier to fix a race
condition between unloading and reloading kernel modules. This fixes a bug
introduced in 2009 by commit 1f857a84ea63 ("[SCSI] fix /proc memory leak in
the SCSI core").
When "backup intent" is requested on the mount (e.g. backupuid or
backupgid mount options), the corresponding flag was missing from
some of the operations.
Change all operations to use the macro cifs_create_options() to
set the backup intent flag if needed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: d447e794a372 ("cifs: Fix uninitialized memory read in smb3_qfs_tcon()") Signed-off-by: Sasha Levin <sashal@kernel.org>
On platforms that do not support IOMMU Extended capability bit 0
Page-walk Coherency, CPU caches are not snooped when IOMMU is accessing
any translation structures. IOMMU access goes only directly to
memory. Intel IOMMU code was missing a flush for the PASID table
directory that resulted in the unrecoverable fault as shown below.
This patch adds clflush calls whenever allocating and updating
a PASID table directory to ensure cache coherency.
On the reverse direction, there's no need to clflush the PASID directory
pointer when we deactivate a context entry in that IOMMU hardware will
not see the old PASID directory pointer after we clear the context entry.
PASID directory entries are also never freed once allocated.
Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.
This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.
Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).
Fixes: a0d8ad712a1e ("irqdomain: Introduce helper function irq_domain_add_hierarchy()") Cc: stable@vger.kernel.org # 3.19 Signed-off-by: Marc Zyngier <maz@kernel.org>
[ johan: add commit message ] Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'size' is used in struct_size(domain, revmap, size) and its input
parameter type is 'size_t'(unsigned int).
Changing the size to 'unsigned int' to make the type consistent.
The resend_msg() function cannot fail, but there was error handling
around using it. Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.
The 'acpiid' buffer in the parse_ivrs_acpihid function may overflow,
because the string specifier in the format string sscanf()
has no width limitation.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Currently, these options cause the following libkmod error:
libkmod: ERROR ../libkmod/libkmod-config.c:489 kcmdline_parse_result: \
Ignoring bad option on kernel command line while parsing module \
name: 'ivrs_xxxx[XX:XX'
Fix by introducing a new parameter format for these options and
throw a warning for the deprecated format.
Users are still allowed to omit the PCI Segment if zero.
Adding a Link: to the reason why we're modding the syntax parsing
in the driver and not in libkmod.
Fixes: 7663e536597d ("iommu/amd: Introduces ivrs_acpihid kernel parameter") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-modules/20200310082308.14318-2-lucas.demarchi@intel.com/ Reported-by: Kim Phillips <kim.phillips@amd.com> Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Kim Phillips <kim.phillips@amd.com> Link: https://lore.kernel.org/r/20220919155638.391481-2-kim.phillips@amd.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter") Signed-off-by: Sasha Levin <sashal@kernel.org>
By default, PCI segment is zero and can be omitted. To support system
with non-zero PCI segment ID, modify the parsing functions to allow
PCI segment ID.
cb_context should be freed on the error path in nfc_se_io as stated by
commit 25ff6f8a5a3b ("nfc: fix memory leak of se_io context in
nfc_genl_se_io").
Make the error path in nfc_se_io unwind everything in reverse order, i.e.
free the cb_context after unlocking the device.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the boot loader inode has never been used before, the
EXT4_IOC_SWAP_BOOT inode will initialize it, including setting the
i_size to 0. However, if the "never before used" boot loader has a
non-zero i_size, then i_disksize will be non-zero, and the
inconsistency between i_size and i_disksize can trigger a kernel
warning:
Above issue happens as follows:
ext4_iget
ext4_find_inline_data_nolock ->i_inline_off=164 i_inline_size=60
ext4_try_add_inline_entry
__ext4_mark_inode_dirty
ext4_expand_extra_isize_ea ->i_extra_isize=32 s_want_extra_isize=44
ext4_xattr_shift_entries
->after shift i_inline_off is incorrect, actually is change to 176
ext4_try_add_inline_entry
ext4_update_inline_dir
get_max_inline_xattr_value_size
if (EXT4_I(inode)->i_inline_off)
entry = (struct ext4_xattr_entry *)((void *)raw_inode +
EXT4_I(inode)->i_inline_off);
free += EXT4_XATTR_SIZE(le32_to_cpu(entry->e_value_size));
->As entry is incorrect, then 'free' may be negative
ext4_update_inline_data
value = kzalloc(len, GFP_NOFS);
-> len is unsigned int, maybe very large, then trigger warning when
'kzalloc()'
To resolve the above issue we need to update 'i_inline_off' after
'ext4_xattr_shift_entries()'. We do not need to set
EXT4_STATE_MAY_INLINE_DATA flag here, since ext4_mark_inode_dirty()
already sets this flag if needed. Setting EXT4_STATE_MAY_INLINE_DATA
when it is needed may trigger a BUG_ON in ext4_writepages().
Reported-by: syzbot+d30838395804afc2fa6f@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307015253.2232062-3-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only caller of ext4_find_inline_data_nolock() that needs setting of
EXT4_STATE_MAY_INLINE_DATA flag is ext4_iget_extra_inode(). In
ext4_write_inline_data_end() we just need to update inode->i_inline_off.
Since we are going to add one more caller that does not need to set
EXT4_STATE_MAY_INLINE_DATA, just move setting of EXT4_STATE_MAY_INLINE_DATA
out to ext4_iget_extra_inode().
Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230307015253.2232062-2-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For GETFSMAP calls, the caller selects a physical block device by
writing its block number into fsmap_head.fmh_keys[01].fmr_device.
To query mappings for a subrange of the device, the starting byte of the
range is written to fsmap_head.fmh_keys[0].fmr_physical and the last
byte of the range goes in fsmap_head.fmh_keys[1].fmr_physical.
IOWs, to query what mappings overlap with bytes 3-14 of /dev/sda, you'd
set the inputs as follows:
Which would return you whatever is mapped in the 12 bytes starting at
physical offset 3.
The crash is due to insufficient range validation of keys[1] in
ext4_getfsmap_datadev. On 1k-block filesystems, block 0 is not part of
the filesystem, which means that s_first_data_block is nonzero.
ext4_get_group_no_and_offset subtracts this quantity from the blocknr
argument before cracking it into a group number and a block number
within a group. IOWs, block group 0 spans blocks 1-8192 (1-based)
instead of 0-8191 (0-based) like what happens with larger blocksizes.
The net result of this encoding is that blocknr < s_first_data_block is
not a valid input to this function. The end_fsb variable is set from
the keys that are copied from userspace, which means that in the above
example, its value is zero. That leads to an underflow here:
Leaving an impossibly large group number (2^32-1) in blocknr.
ext4_getfsmap_check_keys checked that keys[0].fmr_physical and
keys[1].fmr_physical are in increasing order, but
ext4_getfsmap_datadev adjusts keys[0].fmr_physical to be at least
s_first_data_block. This implies that we have to check it again after
the adjustment, which is the piece that I forgot.
A significant number of xfstests can cause ext4 to log one or more
warning messages when they are run on a test file system where the
inline_data feature has been enabled. An example:
"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
#16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."
The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068,
070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585,
589, 626, 631, and 650.
In this situation, the warning message indicates a bug in the code that
performs the RENAME_WHITEOUT operation on a directory entry that has
been stored inline. It doesn't detect that the directory is stored
inline, and incorrectly attempts to compute a dirent block checksum on
the whiteout inode when creating it. This attempt fails as a result
of the integrity checking in get_dirent_tail (usually due to a failure
to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message
is then emitted.
Fix this by simply collecting the inlined data state at the time the
search for the source directory entry is performed. Existing code
handles the rest, and this is sufficient to eliminate all spurious
warning messages produced by the tests above. Go one step further
and do the same in the code that resets the source directory entry in
the event of failure. The inlined state should be present in the
"old" struct, but given the possibility of a race there's no harm
in taking a conservative approach and getting that information again
since the directory entry is being reread anyway.
Fixes: 7ef4b1da17dd ("ext4: find old entry again if failed to rename whiteout") Cc: stable@kernel.org Signed-off-by: Eric Whitney <enwlinux@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that
is not available. This script is not part of the kernel and it is not
officially available on the www. The result is that this lines are just
dead code.
Remove function _rtl92e_dm_check_ac_dc_power calling a script
/etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script
is not part of the kernel and it is not available on the www. The result
is that this function is just dead code.
The commit 778ae812faa1 ("rtc: sun6i: Make external 32k oscillator
optional") loosened the requirement of the clocks property, making it
optional. However, the binding still required it to be present.
usb_kill_urb warranties that all the handlers are finished when it
returns, but does not protect against threads that might be handling
asynchronously the urb.
For UVC, the function uvc_ctrl_status_event_async() takes care of
control changes asynchronously.
If the code is executed in the following order:
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_ctrl_status_event_work()
uvc_status_start() -> FAIL
Then uvc_status_start will keep failing and this error will be shown:
<4>[ 5.540139] URB 0000000000000000 submitted while active
drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
Let's improve the current situation, by not re-submiting the urb if
we are stopping the status event. Also process the queued work
(if any) during stop.
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_status_start()
uvc_ctrl_status_event_work() -> FAIL
Hopefully, with the usb layer protection this should be enough to cover
all the cases.
Cc: stable@vger.kernel.org Fixes: 7128d5bfe465 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Reviewed-by: Yunke Cao <yunkec@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we backport dadd0dcaa67d ("net/ulp: prevent ULP without clone op from
entering the LISTEN status"), we have accidentally backported a part of 79f89118538e ("net: Return errno in sk->sk_prot->get_port().") and removed
err = -EADDRINUSE in inet_csk_listen_start().
Thus, listen() no longer returns -EADDRINUSE even if ->get_port() failed
as reported in [0].
We set -EADDRINUSE to err just before ->get_port() to fix the regression.
The receive path may take the socket right before hci_sock_release(),
but it may enqueue the packets to the socket queues after the call to
skb_queue_purge(), therefore the socket can be destroyed without clear
its queues completely.
Moving these skb_queue_purge() to the hci_sock_destruct() will fix this
issue, because nothing is referencing the socket at this point.
The implementation of 'current' on x86 is very intentionally special: it
is a very common thing to look up, and it uses 'this_cpu_read_stable()'
to get the current thread pointer efficiently from per-cpu storage.
And the keyword in there is 'stable': the current thread pointer never
changes as far as a single thread is concerned. Even if when a thread
is preempted, or moved to another CPU, or even across an explicit call
'schedule()' that thread will still have the same value for 'current'.
It is, after all, the kernel base pointer to thread-local storage.
That's why it's stable to begin with, but it's also why it's important
enough that we have that special 'this_cpu_read_stable()' access for it.
So this is all done very intentionally to allow the compiler to treat
'current' as a value that never visibly changes, so that the compiler
can do CSE and combine multiple different 'current' accesses into one.
However, there is obviously one very special situation when the
currently running thread does actually change: inside the scheduler
itself.
So the scheduler code paths are special, and do not have a 'current'
thread at all. Instead there are _two_ threads: the previous and the
next thread - typically called 'prev' and 'next' (or prev_p/next_p)
internally.
So this is all actually quite straightforward and simple, and not all
that complicated.
Except for when you then have special code that is run in scheduler
context, that code then has to be aware that 'current' isn't really a
valid thing. Did you mean 'prev'? Did you mean 'next'?
In fact, even if then look at the code, and you use 'current' after the
new value has been assigned to the percpu variable, we have explicitly
told the compiler that 'current' is magical and always stable. So the
compiler is quite free to use an older (or newer) value of 'current',
and the actual assignment to the percpu storage is not relevant even if
it might look that way.
Which is exactly what happened in the resctl code, that blithely used
'current' in '__resctrl_sched_in()' when it really wanted the new
process state (as implied by the name: we're scheduling 'into' that new
resctl state). And clang would end up just using the old thread pointer
value at least in some configurations.
This could have happened with gcc too, and purely depends on random
compiler details. Clang just seems to have been more aggressive about
moving the read of the per-cpu current_task pointer around.
The fix is trivial: just make the resctl code adhere to the scheduler
rules of using the prev/next thread pointer explicitly, instead of using
'current' in a situation where it just wasn't valid.
That same code is then also used outside of the scheduler context (when
a thread resctl state is explicitly changed), and then we will just pass
in 'current' as that pointer, of course. There is no ambiguity in that
case.
The fix may be trivial, but noticing and figuring out what went wrong
was not. The credit for that goes to Stephane Eranian.
A CPU's current task can have its {closid, rmid} fields read locally
while they are being concurrently written to from another CPU.
This can happen anytime __resctrl_sched_in() races with either
__rdtgroup_move_task() or rdt_move_group_tasks().
Prevent load / store tearing for those accesses by giving them the
READ_ONCE() / WRITE_ONCE() treatment.
projects / kernel.git / log