KVM: selftests: Use vCPU's CPUID directly in Hyper-V test
Use the vCPU's persistent CPUID array directly when manipulating the set
of exposed Hyper-V CPUID features. Drop set_cpuid() to route all future
modification through the vCPU helpers; the Hyper-V features test was the
last user.
KVM: selftests: Use vcpu_get_cpuid_entry() in PV features test (sort of)
Add a new helper, vcpu_clear_cpuid_entry(), to do a RMW operation on the
vCPU's CPUID model to clear a given CPUID entry, and use it to clear
KVM's paravirt feature instead of operating on kvm_get_supported_cpuid()'s
static "cpuid" variable. This also eliminates a user of
the soon-be-defunct set_cpuid() helper.
KVM: selftests: Add and use helper to set vCPU's CPUID maxphyaddr
Add a helper to set a vCPU's guest.MAXPHYADDR, and use it in the test
that verifies the emulator returns an error on an unknown instruction
when KVM emulates in response to an EPT violation with a GPA that is
legal in hardware but illegal with respect to the guest's MAXPHYADDR.
Add a helper even though there's only a single user at this time. Before
its removal, mmu_role_test also stuffed guest.MAXPHYADDR, and the helper
provides a small amount of clarity.
More importantly, this eliminates a set_cpuid() user and an instance of
modifying kvm_get_supported_cpuid()'s static "cpuid".
KVM: selftests: Use vm->pa_bits to generate reserved PA bits
Use vm->pa_bits to generate the mask of physical address bits that are
reserved in page table entries. vm->pa_bits is set when the VM is
created, i.e. it's guaranteed to be valid when populating page tables.
KVM: selftests: Add helpers to get and modify a vCPU's CPUID entries
Add helpers to get a specific CPUID entry for a given vCPU, and to toggle
a specific CPUID-based feature for a vCPU. The helpers will reduce the
amount of boilerplate code needed to tweak a vCPU's CPUID model, improve
code clarity, and most importantly move tests away from modifying the
static "cpuid" returned by kvm_get_supported_cpuid().
KVM: selftests: Rename and tweak get_cpuid() to get_cpuid_entry()
Rename get_cpuid() to get_cpuid_entry() to better reflect its behavior.
Leave set_cpuid() as is to avoid unnecessary churn, that helper will soon
be removed entirely.
Oppurtunistically tweak the implementation to avoid using a temporary
variable in anticipation of taggin the input @cpuid with "const".
KVM: selftests: Don't use a static local in vcpu_get_supported_hv_cpuid()
Don't use a static variable for the Hyper-V supported CPUID array, the
helper unconditionally reallocates the array on every invocation (and all
callers free the array immediately after use). The array is intentionally
recreated and refilled because the set of supported CPUID features is
dependent on vCPU state, e.g. whether or not eVMCS has been enabled.
Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the
mess where tests, often unknowingly, modify the global/static "cpuid"
allocated by kvm_get_supported_cpuid().
Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID
model, e.g. during vCPU creation or when switching to the Hyper-V enabled
CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that
any adjustments made by KVM are always reflected in the cache. Drop
vcpu_get_cpuid() entirely to force tests to use the cache, and to allow
adding e.g. vcpu_get_cpuid_entry() in the future without creating a
conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but
vcpu_get_cpuid_entry() does not.
Opportunistically convert the VMX nested state test and KVM PV test to
manipulating the vCPU's CPUID (because it's easy), but use
vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test
to effectively retain their current behavior as they're less trivial to
convert.
KVM: selftests: Split out kvm_cpuid2_size() from allocate_kvm_cpuid2()
Split out the computation of the effective size of a kvm_cpuid2 struct
from allocate_kvm_cpuid2(), and modify both to take an arbitrary number
of entries. Future commits will add caching of a vCPU's CPUID model, and
will (a) be able to precisely size the entries array, and (b) will need
to know the effective size of the struct in order to copy to/from the
cache.
Expose the helpers so that the Hyper-V Features test can use them in the
(somewhat distant) future. The Hyper-V test very, very subtly relies on
propagating CPUID info across vCPU instances, and will need to make a
copy of the previous vCPU's CPUID information when it switches to using
the per-vCPU cache. Alternatively, KVM could provide helpers to
duplicate and/or copy a kvm_cpuid2 instance, but each is literally a
single line of code if the helpers are exposed, and it's not like the
size of kvm_cpuid2 is secret knowledge.
KVM: selftests: Verify that kvm_cpuid2.entries layout is unchanged by KVM
In the CPUID test, verify that KVM doesn't modify the kvm_cpuid2.entries
layout, i.e. that the order of entries and their flags is identical
between what the test provides via KVM_SET_CPUID2 and what KVM returns
via KVM_GET_CPUID2.
Asserting that the layouts match simplifies the test as there's no need
to iterate over both arrays.
KVM: selftests: Remove the obsolete/dead MMU role test
Remove the MMU role test, which was made obsolete by KVM commit e49d1db7e0d0 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN"). The
ongoing costs of keeping the test updated far outweigh any benefits,
e.g. the test _might_ be useful as an example or for documentation
purposes, but otherwise the test is dead weight.
Use kvm_cpu_has() in the AMX test instead of open coding equivalent
functionality using kvm_get_supported_cpuid_entry() and
kvm_get_supported_cpuid_index().
KVM: selftests: Check for _both_ XTILE data and cfg in AMX test
Check for _both_ XTILE data and cfg support in the AMX test instead of
checking for _either_ feature. Practically speaking, no sane CPU or vCPU
will support one but not the other, but the effective "or" behavior is
subtle and technically incorrect.
KVM: selftests: Drop redundant vcpu_set_cpuid() from PMU selftest
Drop a redundant vcpu_set_cpuid() from the PMU test. The vCPU's CPUID is
set to KVM's supported CPUID by vm_create_with_one_vcpu(), which was also
true back when the helper was named vm_create_default().
KVM: selftests: Add framework to query KVM CPUID bits
Add X86_FEATURE_* magic in the style of KVM-Unit-Tests' implementation,
where the CPUID function, index, output register, and output bit position
are embedded in the macro value. Add kvm_cpu_has() to query KVM's
supported CPUID and use it set_sregs_test, which is the most prolific
user of manual feature querying.
Opportunstically rename calc_cr4_feature_bits() to
calc_supported_cr4_feature_bits() to better capture how the CR4 bits are
chosen.
KVM: sefltests: Use CPUID_* instead of X86_FEATURE_* for one-off usage
Rename X86_FEATURE_* macros to CPUID_* in various tests to free up the
X86_FEATURE_* names for KVM-Unit-Tests style CPUID automagic where the
function, leaf, register, and bit for the feature is embedded in its
macro value.
KVM: selftests: Set KVM's supported CPUID as vCPU's CPUID during recreate
On x86-64, set KVM's supported CPUID as the vCPU's CPUID when recreating
a VM+vCPU to deduplicate code for state save/restore tests, and to
provide symmetry of sorts with respect to vm_create_with_one_vcpu(). The
extra KVM_SET_CPUID2 call is wasteful for Hyper-V, but ultimately is
nothing more than an expensive nop, and overriding the vCPU's CPUID with
the Hyper-V CPUID information is the only known scenario where a state
save/restore test wouldn't need/want the default CPUID.
Opportunistically use __weak for the default vm_compute_max_gfn(), it's
provided by tools' compiler.h.
Colton Lewis [Wed, 15 Jun 2022 19:31:16 +0000 (19:31 +0000)]
KVM: selftests: Fix filename reporting in guest asserts
Fix filename reporting in guest asserts by ensuring the GUEST_ASSERT
macro records __FILE__ and substituting REPORT_GUEST_ASSERT for many
repetitive calls to TEST_FAIL.
Previously filename was reported by using __FILE__ directly in the
selftest, wrongly assuming it would always be the same as where the
assertion failed.
Signed-off-by: Colton Lewis <coltonlewis@google.com> Reported-by: Ricardo Koller <ricarkol@google.com> Fixes: 56da9b317d058e106c63982fe8779260edcda6d1 Link: https://lore.kernel.org/r/20220615193116.806312-5-coltonlewis@google.com
[sean: convert more TEST_FAIL => REPORT_GUEST_ASSERT instances] Signed-off-by: Sean Christopherson <seanjc@google.com>
Colton Lewis [Wed, 15 Jun 2022 19:31:15 +0000 (19:31 +0000)]
KVM: selftests: Write REPORT_GUEST_ASSERT macros to pair with GUEST_ASSERT
Write REPORT_GUEST_ASSERT macros to pair with GUEST_ASSERT to abstract
and make consistent all guest assertion reporting. Every report
includes an explanatory string, a filename, and a line number.
Colton Lewis [Wed, 15 Jun 2022 19:31:14 +0000 (19:31 +0000)]
KVM: selftests: Increase UCALL_MAX_ARGS to 7
Increase UCALL_MAX_ARGS to 7 to allow GUEST_ASSERT_4 to pass 3 builtin
ucall arguments specified in guest_assert_builtin_args plus 4
user-specified arguments.
KVM: x86: WARN only once if KVM leaves a dangling userspace I/O request
Change a WARN_ON() to separate WARN_ON_ONCE() if KVM has an outstanding
PIO or MMIO request without an associated callback, i.e. if KVM queued a
userspace I/O exit but didn't actually exit to userspace before moving
on to something else. Warning on every KVM_RUN risks spamming the kernel
if KVM gets into a bad state. Opportunistically split the WARNs so that
it's easier to triage failures when a WARN fires.
Deliberately do not use KVM_BUG_ON(), i.e. don't kill the VM. While the
WARN is all but guaranteed to fire if and only if there's a KVM bug, a
dangling I/O request does not present a danger to KVM (that flag is truly
truly consumed only in a single emulator path), and any such bug is
unlikely to be fatal to the VM (KVM essentially failed to do something it
shouldn't have tried to do in the first place). In other words, note the
bug, but let the VM keep running.
KVM: x86: Set error code to segment selector on LLDT/LTR non-canonical #GP
When injecting a #GP on LLDT/LTR due to a non-canonical LDT/TSS base, set
the error code to the selector. Intel SDM's says nothing about the #GP,
but AMD's APM explicitly states that both LLDT and LTR set the error code
to the selector, not zero.
Note, a non-canonical memory operand on LLDT/LTR does generate a #GP(0),
but the KVM code in question is specific to the base from the descriptor.
Fixes: 2268660cef03 ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20220711232750.1092012-3-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM: x86: Mark TSS busy during LTR emulation _after_ all fault checks
Wait to mark the TSS as busy during LTR emulation until after all fault
checks for the LTR have passed. Specifically, don't mark the TSS busy if
the new TSS base is non-canonical.
Opportunistically drop the one-off !seg_desc.PRESENT check for TR as the
only reason for the early check was to avoid marking a !PRESENT TSS as
busy, i.e. the common !PRESENT is now done before setting the busy bit.
Fixes: 2268660cef03 ("KVM: x86: Emulator ignores LDTR/TR extended base on LLDT/LTR") Reported-by: syzbot+760a73552f47a8cd0fd9@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Hou Wenlong <houwenlong.hwl@antgroup.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Link: https://lore.kernel.org/r/20220711232750.1092012-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM: x86: Tweak name of MONITOR/MWAIT #UD quirk to make it #UD specific
Add a "UD" clause to KVM_X86_QUIRK_MWAIT_NEVER_FAULTS to make it clear
that the quirk only controls the #UD behavior of MONITOR/MWAIT. KVM
doesn't currently enforce fault checks when MONITOR/MWAIT are supported,
but that could change in the future. SVM also has a virtualization hole
in that it checks all faults before intercepts, and so "never faults" is
already a lie when running on SVM.
KVM: selftests: Use "a" and "d" to set EAX/EDX for wrmsr_safe()
Do not use GCC's "A" constraint to load EAX:EDX in wrmsr_safe(). Per
GCC's documenation on x86-specific constraints, "A" will not actually
load a 64-bit value into EAX:EDX on x86-64.
The a and d registers. This class is used for instructions that return
double word results in the ax:dx register pair. Single word values will
be allocated either in ax or dx. For example on i386 the following
implements rdtsc:
unsigned long long rdtsc (void)
{
unsigned long long tick;
__asm__ __volatile__("rdtsc":"=A"(tick));
return tick;
}
This is not correct on x86-64 as it would allocate tick in either ax or
dx. You have to use the following variant instead:
unsigned long long rdtsc (void)
{
unsigned int tickl, tickh;
__asm__ __volatile__("rdtsc":"=a"(tickl),"=d"(tickh));
return ((unsigned long long)tickh << 32)|tickl;
}
Because a u64 fits in a single 64-bit register, using "A" for selftests,
which are 64-bit only, results in GCC loading the value into either RAX
or RDX instead of splitting it across EAX:EDX.
KVM: selftests: Provide valid inputs for MONITOR/MWAIT regs
Provide valid inputs for RAX, RCX, and RDX when testing whether or not
KVM injects a #UD on MONITOR/MWAIT. SVM has a virtualization hole and
checks for _all_ faults before checking for intercepts, e.g. MONITOR with
an unsupported RCX will #GP before KVM gets a chance to intercept and
emulate.
KVM: selftests: Test MONITOR and MWAIT, not just MONITOR for quirk
Fix a copy+paste error in monitor_mwait_test by switching one of the two
"monitor" instructions to an "mwait". The intent of the test is very
much to verify the quirk handles both MONITOR and MWAIT.
KVM: x86: Query vcpu->vcpu_idx directly and drop its accessor, again
Read vcpu->vcpu_idx directly instead of bouncing through the one-line
wrapper, kvm_vcpu_get_idx(), and drop the wrapper. The wrapper is a
remnant of the original implementation and serves no purpose; remove it
(again) before it gains more users.
kvm_vcpu_get_idx() was removed in the not-too-distant past by commit 03bff44683ac ("KVM: x86: Query vcpu->vcpu_idx directly and drop its
accessor"), but was unintentionally re-introduced by commit 3a6bf41aabf9
("KVM: Keep memslots in tree-based structures instead of array-based ones"),
likely due to a rebase goof. The wrapper then managed to gain users in
KVM's Xen code.
KVM: x86/mmu: Replace UNMAPPED_GVA with INVALID_GPA for gva_to_gpa()
The result of gva_to_gpa() is physical address not virtual address,
it is odd that UNMAPPED_GVA macro is used as the result for physical
address. Replace UNMAPPED_GVA with INVALID_GPA and drop UNMAPPED_GVA
macro.
KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
Windows 10/11 guests with Hyper-V role (WSL2) enabled are observed to
hang upon boot or shortly after when a non-default TSC frequency was
set for L1. The issue is observed on a host where TSC scaling is
supported. The problem appears to be that Windows doesn't use TSC
scaling for its guests, even when the feature is advertised, and KVM
filters SECONDARY_EXEC_TSC_SCALING out when creating L2 controls from
L1's VMCS. This leads to L2 running with the default frequency (matching
host's) while L1 is running with an altered one.
Keep SECONDARY_EXEC_TSC_SCALING in secondary exec controls for L2 when
it was set for L1. TSC_MULTIPLIER is already correctly computed and
written by prepare_vmcs02().
KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
'vector' and 'trig_mode' fields of 'struct kvm_lapic_irq' are left
uninitialized in kvm_pv_kick_cpu_op(). While these fields are normally
not needed for APIC_DM_REMRD, they're still referenced by
__apic_accept_irq() for trace_kvm_apic_accept_irq(). Fully initialize
the structure to avoid consuming random stack memory.
Fixes: 715c1b0ced00 ("KVM: x86: make apic_accept_irq tracepoint more generic") Reported-by: syzbot+d6caa905917d353f0d07@syzkaller.appspotmail.com Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/r/20220708125147.593975-1-vkuznets@redhat.com Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM: x86: Fix handling of APIC LVT updates when userspace changes MCG_CAP
Add a helper to update KVM's in-kernel local APIC in response to MCG_CAP
being changed by userspace to fix multiple bugs. First and foremost,
KVM needs to check that there's an in-kernel APIC prior to dereferencing
vcpu->arch.apic. Beyond that, any "new" LVT entries need to be masked,
and the APIC version register needs to be updated as it reports out the
number of LVT entries.
Fixes: 7dbdcb4e6022 ("KVM: x86: Add Corrected Machine Check Interrupt (CMCI) emulation to lapic.") Reported-by: syzbot+8cdad6430c24f396f158@syzkaller.appspotmail.com Cc: Siddh Raman Pant <code@siddh.me> Cc: Jue Wang <juew@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM: x86: Initialize number of APIC LVT entries during APIC creation
Initialize the number of LVT entries during APIC creation, else the field
will be incorrectly left '0' if userspace never invokes KVM_X86_SETUP_MCE.
Add and use a helper to calculate the number of entries even though
MCG_CMCI_P is not set by default in vcpu->arch.mcg_cap. Relying on that
to always be true is unnecessarily risky, and subtle/confusing as well.
Fixes: 7dbdcb4e6022 ("KVM: x86: Add Corrected Machine Check Interrupt (CMCI) emulation to lapic.") Reported-by: Xiaoyao Li <xiaoyao.li@intel.com> Cc: Jue Wang <juew@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Merge a bug fix and cleanups for {g,s}et_msr_mce() using a base that
predates commit 300febc8e417 ("KVM: x86: Add emulation for
MSR_IA32_MCx_CTL2 MSRs."), which was written with the intention that it
be applied _after_ the bug fix and cleanups. The bug fix in particular
needs to be sent to stable trees; give them a stable hash to use.
KVM: x86: Add helpers to identify CTL and STATUS MCi MSRs
Add helpers to identify CTL (control) and STATUS MCi MSR types instead of
open coding the checks using the offset. Using the offset is perfectly
safe, but unintuitive, as understanding what the code does requires
knowing that the offset calcuation will not affect the lower three bits.
Opportunistically comment the STATUS logic to save readers a trip to
Intel's SDM or AMD's APM to understand the "data != 0" check.
KVM: x86: Use explicit case-statements for MCx banks in {g,s}et_msr_mce()
Use an explicit case statement to grab the full range of MCx bank MSRs
in {g,s}et_msr_mce(), and manually check only the "end" (the number of
banks configured by userspace may be less than the max). The "default"
trick works, but is a bit odd now, and will be quite odd if/when support
for accessing MCx_CTL2 MSRs is added, which has near identical logic.
Hoist "offset" to function scope so as to avoid curly braces for the case
statement, and because MCx_CTL2 support will need the same variables.
Opportunstically clean up the comment about allowing bit 10 to be cleared
from bank 4.
KVM: x86: Signal #GP, not -EPERM, on bad WRMSR(MCi_CTL/STATUS)
Return '1', not '-1', when handling an illegal WRMSR to a MCi_CTL or
MCi_STATUS MSR. The behavior of "all zeros' or "all ones" for CTL MSRs
is architectural, as is the "only zeros" behavior for STATUS MSRs. I.e.
the intent is to inject a #GP, not exit to userspace due to an unhandled
emulation case. Returning '-1' gets interpreted as -EPERM up the stack
and effecitvely kills the guest.
Fixes: 5624ec74455f ("KVM: Add MCE support") Fixes: f143e7d581a8 ("KVM: X86: #GP when guest attempts to write MCi_STATUS register w/o 0") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Link: https://lore.kernel.org/r/20220512222716.4112548-2-seanjc@google.com
KVM: x86/mmu: Buffer nested MMU split_desc_cache only by default capacity
Buffer split_desc_cache, the cache used to allcoate rmap list entries,
only by the default cache capacity (currently 40), not by doubling the
minimum (513). Aliasing L2 GPAs to L1 GPAs is uncommon, thus eager page
splitting is unlikely to need 500+ entries. And because each object is a
non-trivial 128 bytes (see struct pte_list_desc), those extra ~500
entries means KVM is in all likelihood wasting ~64kb of memory per VM.
KVM: x86/mmu: Use "unsigned int", not "u32", for SPTEs' @access info
Use an "unsigned int" for @access parameters instead of a "u32", mostly
to be consistent throughout KVM, but also because "u32" is misleading.
@access can actually squeeze into a u8, i.e. doesn't need 32 bits, but is
as an "unsigned int" because sp->role.access is an unsigned int.
Paolo Bonzini [Fri, 22 Oct 2021 12:47:56 +0000 (08:47 -0400)]
KVM: SEV-ES: reuse advance_sev_es_emulated_ins for OUT too
complete_emulator_pio_in() only has to be called by
complete_sev_es_emulated_ins() now; therefore, all that the function does
now is adjust sev_pio_count and sev_pio_data. Which is the same for
both IN and OUT.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 Oct 2021 12:19:48 +0000 (08:19 -0400)]
KVM: x86: de-underscorify __emulator_pio_in
Now all callers except emulator_pio_in_emulated are using
__emulator_pio_in/complete_emulator_pio_in explicitly.
Move the "either copy the result or attempt PIO" logic in
emulator_pio_in_emulated, and rename __emulator_pio_in to
just emulator_pio_in.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 Oct 2021 12:01:36 +0000 (08:01 -0400)]
KVM: x86: wean fast IN from emulator_pio_in
Use __emulator_pio_in() directly for fast PIO instead of bouncing through
emulator_pio_in() now that __emulator_pio_in() fills "val" when handling
in-kernel PIO. vcpu->arch.pio.count is guaranteed to be '0', so this a
pure nop.
emulator_pio_in_emulated is now the last caller of emulator_pio_in.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 15 Jun 2022 14:24:01 +0000 (10:24 -0400)]
KVM: x86: wean in-kernel PIO from vcpu->arch.pio*
Make emulator_pio_in_out operate directly on the provided buffer
as long as PIO is handled inside KVM.
For input operations, this means that, in the case of in-kernel
PIO, __emulator_pio_in() does not have to be always followed
by complete_emulator_pio_in(). This affects emulator_pio_in() and
kvm_sev_es_ins(); for the latter, that is why the call moves from
advance_sev_es_emulated_ins() to complete_sev_es_emulated_ins().
For output, it means that vcpu->pio.count is never set unnecessarily
and there is no need to clear it; but also vcpu->pio.size must not
be used in kvm_sev_es_outs(), because it will not be updated for
in-kernel OUT.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 Oct 2021 12:07:19 +0000 (08:07 -0400)]
KVM: x86: move all vcpu->arch.pio* setup in emulator_pio_in_out()
For now, this is basically an excuse to add back the void* argument to
the function, while removing some knowledge of vcpu->arch.pio* from
its callers. The WARN that vcpu->arch.pio.count is zero is also
extended to OUT operations.
The vcpu->arch.pio* fields still need to be filled even when the PIO is
handled in-kernel as __emulator_pio_in() is always followed by
complete_emulator_pio_in(). But after fixing that, it will be possible to
to only populate the vcpu->arch.pio* fields on userspace exits.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 15 Jun 2022 15:05:06 +0000 (11:05 -0400)]
KVM: x86: drop PIO from unregistered devices
KVM protects the device list with SRCU, and therefore different calls
to kvm_io_bus_read()/kvm_io_bus_write() can very well see different
incarnations of kvm->buses. If userspace unregisters a device while
vCPUs are running there is no well-defined result. This patch applies
a safe fallback by returning early from emulator_pio_in_out(). This
corresponds to returning zeroes from IN, and dropping the writes on
the floor for OUT.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 Oct 2021 10:50:06 +0000 (06:50 -0400)]
KVM: x86: inline kernel_pio into its sole caller
The caller of kernel_pio already has arguments for most of what kernel_pio
fishes out of vcpu->arch.pio. This is the first step towards ensuring that
vcpu->arch.pio.* is only used when exiting to userspace.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 15 Jun 2022 17:32:29 +0000 (13:32 -0400)]
KVM: x86: complete fast IN directly with complete_emulator_pio_in()
Use complete_emulator_pio_in() directly when completing fast PIO, there's
no need to bounce through emulator_pio_in(): the comment about ECX
changing doesn't apply to fast PIO, which isn't used for string I/O.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SVM: Use target APIC ID to complete x2AVIC IRQs when possible
For x2AVIC, the index from incomplete IPI #vmexit info is invalid
for logical cluster mode. Only ICRH/ICRL values can be used
to determine the IPI destination APIC ID.
Since QEMU defines guest physical APIC ID to be the same as
vCPU ID, it can be used to quickly identify the target vCPU to deliver IPI,
and avoid the overhead from searching through all vCPUs to match the target
vCPU.
KVM: x86: Warning APICv inconsistency only when vcpu APIC mode is valid
When launching a VM with x2APIC and specify more than 255 vCPUs,
the guest kernel can disable x2APIC (e.g. specify nox2apic kernel option).
The VM fallbacks to xAPIC mode, and disable the vCPU ID 255 and greater.
In this case, APICV is deactivated for the disabled vCPUs.
However, the current APICv consistency warning does not account for
this case, which results in a warning.
Therefore, modify warning logic to report only when vCPU APIC mode
is valid.
Currently, AVIC is inhibited when booting a VM w/ x2APIC support.
because AVIC cannot virtualize x2APIC MSR register accesses.
However, the AVIC doorbell can be used to accelerate interrupt
injection into a running vCPU, while all guest accesses to x2APIC MSRs
will be intercepted and emulated by KVM.
With hybrid-AVIC support, the APICV_INHIBIT_REASON_X2APIC is
no longer enforced.
KVM: SVM: Do not throw warning when calling avic_vcpu_load on a running vcpu
Originalliy, this WARN_ON is designed to detect when calling
avic_vcpu_load() on an already running vcpu in AVIC mode (i.e. the AVIC
is_running bit is set).
However, for x2AVIC, the vCPU can switch from xAPIC to x2APIC mode while in
running state, in which the avic_vcpu_load() will be called from
svm_refresh_apicv_exec_ctrl().
Therefore, remove this warning since it is no longer appropriate.
KVM: SVM: Refresh AVIC configuration when changing APIC mode
AMD AVIC can support xAPIC and x2APIC virtualization,
which requires changing x2APIC bit VMCB and MSR intercepton
for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl()
to refresh configuration accordingly.
KVM: x86: Deactivate APICv on vCPU with APIC disabled
APICv should be deactivated on vCPU that has APIC disabled.
Therefore, call kvm_vcpu_update_apicv() when changing
APIC mode, and add additional check for APIC disable mode
when determine APICV activation,
KVM: SVM: Adding support for configuring x2APIC MSRs interception
When enabling x2APIC virtualization (x2AVIC), the interception of
x2APIC MSRs must be disabled to let the hardware virtualize guest
MSR accesses.
Current implementation keeps track of list of MSR interception state
in the svm_direct_access_msrs array. Therefore, extends the array to
include x2APIC MSRs.
KVM: SVM: Do not support updating APIC ID when in x2APIC mode
In X2APIC mode, the Logical Destination Register is read-only,
which provides a fixed mapping between the logical and physical
APIC IDs. Therefore, there is no Logical APIC ID table in X2AVIC
and the processor uses the X2APIC ID in the backing page to create
a vCPU’s logical ID.
In addition, KVM does not support updating APIC ID in x2APIC mode,
which means AVIC does not need to handle this case.
Therefore, check x2APIC mode when handling physical and logical
APIC ID update, and when invalidating logical APIC ID table.
KVM: SVM: Detect X2APIC virtualization (x2AVIC) support
Add CPUID check for the x2APIC virtualization (x2AVIC) feature.
If available, the SVM driver can support both AVIC and x2AVIC modes
when load the kvm_amd driver with avic=1. The operating mode will be
determined at runtime depending on the guest APIC mode.
Vineeth Pillai [Mon, 23 May 2022 19:03:27 +0000 (15:03 -0400)]
KVM: debugfs: expose pid of vcpu threads
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Zeng Guang [Thu, 23 Jun 2022 09:45:11 +0000 (17:45 +0800)]
KVM: selftests: Enhance handling WRMSR ICR register in x2APIC mode
Hardware would directly write x2APIC ICR register instead of software
emulation in some circumstances, e.g when Intel IPI virtualization is
enabled. This behavior requires normal reserved bits checking to ensure
them input as zero, otherwise it will cause #GP. So we need mask out
those reserved bits from the data written to vICR register.
Remove Delivery Status bit emulation in test case as this flag
is invalid and not needed in x2APIC mode. KVM may ignore clearing
it during interrupt dispatch which will lead to fake test failure.
Opportunistically correct vector number for test sending IPI to
non-existent vCPUs.
Signed-off-by: Zeng Guang <guang.zeng@intel.com>
Message-Id: <20220623094511.26066-1-guang.zeng@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:34 +0000 (10:11 -0700)]
KVM: selftests: Add a self test for CMCI and UCNA emulations.
This patch add a self test that verifies user space can inject
UnCorrectable No Action required (UCNA) memory errors to the guest.
It also verifies that incorrectly configured MSRs for Corrected
Machine Check Interrupt (CMCI) emulation will result in #GP.
Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-9-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:33 +0000 (10:11 -0700)]
KVM: x86: Enable CMCI capability by default and handle injected UCNA errors
This patch enables MCG_CMCI_P by default in kvm_mce_cap_supported. It
reuses ioctl KVM_X86_SET_MCE to implement injection of UnCorrectable
No Action required (UCNA) errors, signaled via Corrected Machine
Check Interrupt (CMCI).
Neither of the CMCI and UCNA emulations depends on hardware.
Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-8-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:32 +0000 (10:11 -0700)]
KVM: x86: Add emulation for MSR_IA32_MCx_CTL2 MSRs.
This patch adds the emulation of IA32_MCi_CTL2 registers to KVM. A
separate mci_ctl2_banks array is used to keep the existing mce_banks
register layout intact.
In Machine Check Architecture, in addition to MCG_CMCI_P, bit 30 of
the per-bank register IA32_MCi_CTL2 controls whether Corrected Machine
Check error reporting is enabled.
Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-7-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:31 +0000 (10:11 -0700)]
KVM: x86: Use kcalloc to allocate the mce_banks array.
This patch updates the allocation of mce_banks with the array allocation
API (kcalloc) as a precedent for the later mci_ctl2_banks to implement
per-bank control of Corrected Machine Check Interrupt (CMCI).
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-6-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch calculates the number of lvt entries as part of
KVM_X86_MCE_SETUP conditioned on the presence of MCG_CMCI_P bit in
MCG_CAP and stores result in kvm_lapic. It translats from APIC_LVTx
register to index in lapic_lvt_entry enum. It extends the APIC_LVTx
macro as well as other lapic write/reset handling etc to support
Corrected Machine Check Interrupt.
Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-5-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:29 +0000 (10:11 -0700)]
KVM: x86: Add APIC_LVTx() macro.
An APIC_LVTx macro is introduced to calcualte the APIC_LVTx register
offset based on the index in the lapic_lvt_entry enum. Later patches
will extend the APIC_LVTx macro to support the APIC_LVTCMCI register
in order to implement Corrected Machine Check Interrupt signaling.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-4-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jun 2022 19:27:10 +0000 (15:27 -0400)]
KVM: x86/mmu: Avoid unnecessary flush on eager page split
The TLB flush before installing the newly-populated lower level
page table is unnecessary if the lower-level page table maps
the huge page identically. KVM knows it is if it did not reuse
an existing shadow page table, tell drop_large_spte() to skip
the flush in that case.
Extracted from a patch by David Matlack.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:28 +0000 (10:11 -0700)]
KVM: x86: Fill apic_lvt_mask with enums / explicit entries.
This patch defines a lapic_lvt_entry enum used as explicit indices to
the apic_lvt_mask array. In later patches a LVT_CMCI will be added to
implement the Corrected Machine Check Interrupt signaling.
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-3-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jue Wang [Fri, 10 Jun 2022 17:11:27 +0000 (10:11 -0700)]
KVM: x86: Make APIC_VERSION capture only the magic 0x14UL.
Refactor APIC_VERSION so that the maximum number of LVT entries is
inserted at runtime rather than compile time. This will be used in a
subsequent commit to expose the LVT CMCI Register to VMs that support
Corrected Machine Check error counting/signaling
(IA32_MCG_CAP.MCG_CMCI_P=1).
Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Jue Wang <juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220610171134.772566-2-juew@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:09 +0000 (15:27 -0400)]
KVM: x86/mmu: Extend Eager Page Splitting to nested MMUs
Add support for Eager Page Splitting pages that are mapped by nested
MMUs. Walk through the rmap first splitting all 1GiB pages to 2MiB
pages, and then splitting all 2MiB pages to 4KiB pages.
Note, Eager Page Splitting is limited to nested MMUs as a policy rather
than due to any technical reason (the sp->role.guest_mode check could
just be deleted and Eager Page Splitting would work correctly for all
shadow MMU pages). There is really no reason to support Eager Page
Splitting for tdp_mmu=N, since such support will eventually be phased
out, and there is no current use case supporting Eager Page Splitting on
hosts where TDP is either disabled or unavailable in hardware.
Furthermore, future improvements to nested MMU scalability may diverge
the code from the legacy shadow paging implementation. These
improvements will be simpler to make if Eager Page Splitting does not
have to worry about legacy shadow paging.
Splitting huge pages mapped by nested MMUs requires dealing with some
extra complexity beyond that of the TDP MMU:
(1) The shadow MMU has a limit on the number of shadow pages that are
allowed to be allocated. So, as a policy, Eager Page Splitting
refuses to split if there are KVM_MIN_FREE_MMU_PAGES or fewer
pages available.
(2) Splitting a huge page may end up re-using an existing lower level
shadow page tables. This is unlike the TDP MMU which always allocates
new shadow page tables when splitting.
(3) When installing the lower level SPTEs, they must be added to the
rmap which may require allocating additional pte_list_desc structs.
Case (2) is especially interesting since it may require a TLB flush,
unlike the TDP MMU which can fully split huge pages without any TLB
flushes. Specifically, an existing lower level page table may point to
even lower level page tables that are not fully populated, effectively
unmapping a portion of the huge page, which requires a flush. As of
this commit, a flush is always done always after dropping the huge page
and before installing the lower level page table.
This TLB flush could instead be delayed until the MMU lock is about to be
dropped, which would batch flushes for multiple splits. However these
flushes should be rare in practice (a huge page must be aliased in
multiple SPTEs and have been split for NX Huge Pages in only some of
them). Flushing immediately is simpler to plumb and also reduces the
chances of tripping over a CPU bug (e.g. see iTLB multihit).
[ This commit is based off of the original implementation of Eager Page
Splitting from Peter in Google's kernel from 2016. ]
Suggested-by: Peter Feiner <pfeiner@google.com> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-23-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:08 +0000 (15:27 -0400)]
KVM: Allow for different capacities in kvm_mmu_memory_cache structs
Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.
This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().
In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.
While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.
No functional change intended.
Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-22-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 22 Jun 2022 19:27:07 +0000 (15:27 -0400)]
KVM: x86/mmu: pull call to drop_large_spte() into __link_shadow_page()
Before allocating a child shadow page table, all callers check
whether the parent already points to a huge page and, if so, they
drop that SPTE. This is done by drop_large_spte().
However, dropping the large SPTE is really only necessary before the
sp is installed. While the sp is returned by kvm_mmu_get_child_sp(),
installing it happens later in __link_shadow_page(). Move the call
there instead of having it in each and every caller.
To ensure that the shadow page is not linked twice if it was present,
do _not_ opportunistically make kvm_mmu_get_child_sp() idempotent:
instead, return an error value if the shadow page already existed.
This is a bit more verbose, but clearer than NULL.
Finally, now that the drop_large_spte() name is not taken anymore,
remove the two underscores in front of __drop_large_spte().
Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:06 +0000 (15:27 -0400)]
KVM: x86/mmu: Zap collapsible SPTEs in shadow MMU at all possible levels
Currently KVM only zaps collapsible 4KiB SPTEs in the shadow MMU. This
is fine for now since KVM never creates intermediate huge pages during
dirty logging. In other words, KVM always replaces 1GiB pages directly
with 4KiB pages, so there is no reason to look for collapsible 2MiB
pages.
However, this will stop being true once the shadow MMU participates in
eager page splitting. During eager page splitting, each 1GiB is first
split into 2MiB pages and then those are split into 4KiB pages. The
intermediate 2MiB pages may be left behind if an error condition causes
eager page splitting to bail early.
No functional change intended.
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-20-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:05 +0000 (15:27 -0400)]
KVM: x86/mmu: Extend make_huge_page_split_spte() for the shadow MMU
Currently make_huge_page_split_spte() assumes execute permissions can be
granted to any 4K SPTE when splitting huge pages. This is true for the
TDP MMU but is not necessarily true for the shadow MMU, since KVM may be
shadowing a non-executable huge page.
To fix this, pass in the role of the child shadow page where the huge
page will be split and derive the execution permission from that. This
is correct because huge pages are always split with direct shadow page
and thus the shadow page role contains the correct access permissions.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-19-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:04 +0000 (15:27 -0400)]
KVM: x86/mmu: Cache the access bits of shadowed translations
Splitting huge pages requires allocating/finding shadow pages to replace
the huge page. Shadow pages are keyed, in part, off the guest access
permissions they are shadowing. For fully direct MMUs, there is no
shadowing so the access bits in the shadow page role are always ACC_ALL.
But during shadow paging, the guest can enforce whatever access
permissions it wants.
In particular, eager page splitting needs to know the permissions to use
for the subpages, but KVM cannot retrieve them from the guest page
tables because eager page splitting does not have a vCPU. Fortunately,
the guest access permissions are easy to cache whenever page faults or
FNAME(sync_page) update the shadow page tables; this is an extension of
the existing cache of the shadowed GFNs in the gfns array of the shadow
page. The access bits only take up 3 bits, which leaves 61 bits left
over for gfns, which is more than enough.
Now that the gfns array caches more information than just GFNs, rename
it to shadowed_translation.
While here, preemptively fix up the WARN_ON() that detects gfn
mismatches in direct SPs. The WARN_ON() was paired with a
pr_err_ratelimited(), which means that users could sometimes see the
WARN without the accompanying error message. Fix this by outputting the
error message as part of the WARN splat, and opportunistically make
them WARN_ONCE() because if these ever fire, they are all but guaranteed
to fire a lot and will bring down the kernel.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-18-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:03 +0000 (15:27 -0400)]
KVM: x86/mmu: Update page stats in __rmap_add()
Update the page stats in __rmap_add() rather than at the call site. This
will avoid having to manually update page stats when splitting huge
pages in a subsequent commit.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-17-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:02 +0000 (15:27 -0400)]
KVM: x86/mmu: Decouple rmap_add() and link_shadow_page() from kvm_vcpu
Allow adding new entries to the rmap and linking shadow pages without a
struct kvm_vcpu pointer by moving the implementation of rmap_add() and
link_shadow_page() into inner helper functions.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-16-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:01 +0000 (15:27 -0400)]
KVM: x86/mmu: Pass const memslot to rmap_add()
Constify rmap_add()'s @slot parameter; it is simply passed on to
gfn_to_rmap(), which takes a const memslot.
No functional change intended.
Reviewed-by: Ben Gardon <bgardon@google.com> Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-15-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:27:00 +0000 (15:27 -0400)]
KVM: x86/mmu: Allow NULL @vcpu in kvm_mmu_find_shadow_page()
Allow @vcpu to be NULL in kvm_mmu_find_shadow_page() (and its only
caller __kvm_mmu_get_shadow_page()). @vcpu is only required to sync
indirect shadow pages, so it's safe to pass in NULL when looking up
direct shadow pages.
This will be used for doing eager page splitting, which allocates direct
shadow pages from the context of a VM ioctl without access to a vCPU
pointer.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-14-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:59 +0000 (15:26 -0400)]
KVM: x86/mmu: Pass kvm pointer separately from vcpu to kvm_mmu_find_shadow_page()
Get the kvm pointer from the caller, rather than deriving it from
vcpu->kvm, and plumb the kvm pointer all the way from
kvm_mmu_get_shadow_page(). With this change in place, the vcpu pointer
is only needed to sync indirect shadow pages. In other words,
__kvm_mmu_get_shadow_page() can now be used to get *direct* shadow pages
without a vcpu pointer. This enables eager page splitting, which needs
to allocate direct shadow pages during VM ioctls.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-13-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Matlack [Wed, 22 Jun 2022 19:26:58 +0000 (15:26 -0400)]
KVM: x86/mmu: Replace vcpu with kvm in kvm_mmu_alloc_shadow_page()
The vcpu pointer in kvm_mmu_alloc_shadow_page() is only used to get the
kvm pointer. So drop the vcpu pointer and just pass in the kvm pointer.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-12-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / kernel.git / log