Linus Torvalds [Fri, 3 Dec 2021 19:46:20 +0000 (11:46 -0800)]
Merge tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix potential overlap of pseudo-MMIO addresses with MIO addresses
- Fix stack unwinder test case inline assembly compile error that
happens with LLVM's integrated assembler
- Update defconfigs
* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/pci: move pseudo-MMIO to prevent MIO overlap
s390/test_unwind: use raw opcode instead of invalid instruction
Linus Torvalds [Fri, 3 Dec 2021 18:50:14 +0000 (10:50 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc4.
One of them is just a trivial documentation fix, whereas the other two
address a warning in the kexec code and a crash in ftrace on systems
implementing BTI.
The latter patch has a couple of ugly ifdefs which Mark plans to clean
up separately, but as-is the patch is straightforward for backporting
to stable kernels.
Summary:
- Add missing BTI landing instructions to the ftrace*_caller
trampolines
- Fix kexec() WARN when DEBUG_VIRTUAL is enabled
- Fix PAC documentation by removing stale references to compiler
flags"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
Linus Torvalds [Fri, 3 Dec 2021 18:44:16 +0000 (10:44 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has another set of driver bugfixes, mostly for the stm32f7 driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: Handle a spurious start completion interrupt flag
i2c: stm32f7: use proper DMAENGINE API for termination
i2c: stm32f7: stop dma transfer in case of NACK
i2c: stm32f7: recover the bus on access timeout
i2c: stm32f7: flush TX FIFO upon transfer errors
i2c: cbus-gpio: set atomic transfer callback
Linus Torvalds [Fri, 3 Dec 2021 18:38:45 +0000 (10:38 -0800)]
Merge tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two sparse warning fixes and a couple of patches to fix an issue with
sata_fsl driver module removal:
- A couple of patches to avoid sparse warnings in libata-sata and in
the pata_falcon driver (from Yang and Finn).
- A couple of sata_fsl driver patches fixing IRQ free and proc
unregister on module removal (from Baokun)"
* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: replace snprintf in show functions with sysfs_emit
sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
pata_falcon: Avoid type warnings from sparse
Linus Torvalds [Wed, 1 Dec 2021 18:06:14 +0000 (10:06 -0800)]
fget: check that the fd still exists after getting a ref to it
Jann Horn points out that there is another possible race wrt Unix domain
socket garbage collection, somewhat reminiscent of the one fixed in
commit 7a8667c96981 ("af_unix: fix garbage collect vs MSG_PEEK").
See the extended comment about the garbage collection requirements added
to unix_peek_fds() by that commit for details.
The race comes from how we can locklessly look up a file descriptor just
as it is in the process of being closed, and with the right artificial
timing (Jann added a few strategic 'mdelay(500)' calls to do that), the
Unix domain socket garbage collector could see the reference count
decrement of the close() happen before fget() took its reference to the
file and the file was attached onto a new file descriptor.
This is all (intentionally) correct on the 'struct file *' side, with
RCU lookups and lockless reference counting very much part of the
design. Getting that reference count out of order isn't a problem per
se.
But the garbage collector can get confused by seeing this situation of
having seen a file not having any remaining external references and then
seeing it being attached to an fd.
In commit 7a8667c96981 ("af_unix: fix garbage collect vs MSG_PEEK") the
fix was to serialize the file descriptor install with the garbage
collector by taking and releasing the unix_gc_lock.
That's not really an option here, but since this all happens when we are
in the process of looking up a file descriptor, we can instead simply
just re-check that the file hasn't been closed in the meantime, and just
re-do the lookup if we raced with a concurrent close() of the same file
descriptor.
Linus Torvalds [Thu, 2 Dec 2021 22:38:54 +0000 (14:38 -0800)]
Merge tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Bit of an uptick in patch count this week, though it's all relatively
small overall.
I suspect msm has been queuing up a few fixes to skew it here.
Otherwise amdgpu has a scattered bunch of small fixes, and then some
vc4, i915.
virtio-gpu changes an rc1 introduced uAPI mistake, and makes it
operate more like other drivers. This should be fine as no userspace
relies on the behaviour yet.
* tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits)
Revert "drm/i915: Implement Wa_1508744258"
drm/amdkfd: process_info lock not needed for svm
drm/amdgpu: adjust the kfd reset sequence in reset sriov function
drm/amd/display: add connector type check for CRC source set
drm/amdkfd: fix double free mem structure
drm/amdkfd: set "r = 0" explicitly before goto
drm/amd/display: Add work around for tunneled MST.
drm/amd/display: Fix for the no Audio bug with Tiled Displays
drm/amd/display: Clear DPCD lane settings after repeater training
drm/amd/display: Allow DSC on supported MST branch devices
drm/amdgpu: Don't halt RLC on GFX suspend
drm/amdgpu: fix the missed handling for SDMA2 and SDMA3
drm/amdgpu: check atomic flag to differeniate with legacy path
drm/amdgpu: cancel the correct hrtimer on exit
drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID
drm/i915/dp: Perform 30ms delay after source OUI write
dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow
drm/i915: Add support for panels with VESA backlights with PWM enable/disable
drm/vc4: kms: Fix previous HVS commit wait
drm/vc4: kms: Don't duplicate pending commit
...
Dave Airlie [Thu, 2 Dec 2021 19:59:26 +0000 (05:59 +1000)]
Merge tag 'drm-intel-fixes-2021-12-02' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixing a regression where the backlight brightness control stopped working.
- Fix the Intel HDR backlight support detection.
- Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also
for a hang, but in a much rarer scenario. The proper solution need
to be done with help from user space and it will be addressed later.
- rds: correct socket tunable error in rds_tcp_tune()
- ipv6: fix memory leak in fib6_rule_suppress
- wireguard: reset peer src endpoint when netns exits
- wireguard: improve resilience to DoS around incoming handshakes
- tcp: fix page frag corruption on page fault which involves TCP
- mpls: fix missing attributes in delete notifications
- mt7915: fix NULL pointer dereference with ad-hoc mode
Misc:
- rt2x00: be more lenient about EPROTO errors during start
- mlx4_en: update reported link modes for 1/10G"
* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: dsa: b53: Add SPI ID table
gro: Fix inconsistent indenting
selftests: net: Correct case name
net/rds: correct socket tunable error in rds_tcp_tune()
mctp: Don't let RTM_DELROUTE delete local routes
net/smc: Keep smc_close_final rc during active close
ibmvnic: drop bad optimization in reuse_tx_pools()
ibmvnic: drop bad optimization in reuse_rx_pools()
net/smc: fix wrong list_del in smc_lgr_cleanup_early
Fix Comment of ETH_P_802_3_MIN
ethernet: aquantia: Try MAC address from device tree
ipv4: convert fib_num_tclassid_users to atomic_t
net: avoid uninit-value from tcp_conn_request
net: annotate data-races on txq->xmit_lock_owner
octeontx2-af: Fix a memleak bug in rvu_mbox_init()
net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
...
Linus Torvalds [Thu, 2 Dec 2021 19:07:41 +0000 (11:07 -0800)]
Merge tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three tracing fixes:
- Allow compares of strings when using signed and unsigned characters
- Fix kmemleak false positive for histogram entries
- Handle negative numbers for user defined kretprobe data sizes"
* tag 'trace-v5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kprobes: Limit max data_size of the kretprobe instances
tracing: Fix a kmemleak false positive in tracing_map
tracing/histograms: String compares should not care about signed values
Linus Torvalds [Thu, 2 Dec 2021 18:56:16 +0000 (10:56 -0800)]
Merge tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Some changes that went in 5.16 had issues. When working on the design
a piece was redesigned and things got missed. And the message type was
not being initialized when it was allocated, resulting in crashes.
In addition, the IPMI driver has had a shutdown issue where it could
still have an item in a system workqueue after it had been shutdown.
Move to a private workqueue to avoid that problem"
* tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi:
ipmi:ipmb: Fix unknown command response
ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking
ipmi: fix oob access due to uninit smi_msg type
ipmi: msghandler: Make symbol 'remove_work_wq' static
ipmi: Move remove_work to dedicated workqueue
Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.
Fixes: 0ce7936ceffc ("spi: Revert modalias changes") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Li Zhijian [Thu, 2 Dec 2021 02:28:41 +0000 (10:28 +0800)]
selftests: net: Correct case name
ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names
Fixes: b249bfc2296e ("selftests: Add ipv6 address bind tests to fcnal-test") Fixes: 5d4a6c65516f ("selftests: Add ipv4 address bind tests to fcnal-test") Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/rds: correct socket tunable error in rds_tcp_tune()
Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would
instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched.
Fixes: 260a1efff476 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket") Signed-off-by: William Kucharski <william.kucharski@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Matt Johnston [Wed, 1 Dec 2021 08:07:42 +0000 (16:07 +0800)]
mctp: Don't let RTM_DELROUTE delete local routes
We need to test against the existing route type, not
the rtm_type in the netlink request.
Fixes: 200c1b0d4752 ("mctp: Specify route types, require rtm_type in RTM_*ROUTE messages") Signed-off-by: Matt Johnston <matt@codeconstruct.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Lu [Wed, 1 Dec 2021 06:42:16 +0000 (14:42 +0800)]
net/smc: Keep smc_close_final rc during active close
When smc_close_final() returns error, the return code overwrites by
kernel_sock_shutdown() in smc_close_active(). The return code of
smc_close_final() is more important than kernel_sock_shutdown(), and it
will pass to userspace directly.
Fix it by keeping both return codes, if smc_close_final() raises an
error, return it or kernel_sock_shutdown()'s.
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/ Fixes: 5b5d5453db58 ("net/smc: Ensure the active closing peer first closes clcsock") Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ibmvnic: drop bad optimization in reuse_tx_pools()
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes: 7516c9974ece ("ibmvnic: Reuse tx pools when possible") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ibmvnic: drop bad optimization in reuse_rx_pools()
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes: 48182133bac4 ("ibmvnic: Reuse rx pools when possible") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Wed, 1 Dec 2021 03:02:30 +0000 (11:02 +0800)]
net/smc: fix wrong list_del in smc_lgr_cleanup_early
smc_lgr_cleanup_early() meant to delete the link
group from the link group list, but it deleted
the list head by mistake.
This may cause memory corruption since we didn't
remove the real link group from the list and later
memseted the link group structure.
We got a list corruption panic when testing:
Fixes: bb81994a1043a ("net/smc: separate locks for SMCD and SMCR link group lists") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xiayu Zhang [Wed, 1 Dec 2021 02:57:13 +0000 (10:57 +0800)]
Fix Comment of ETH_P_802_3_MIN
The description of ETH_P_802_3_MIN is misleading.
The value of EthernetType in Ethernet II frame is more than 0x0600,
the value of Length in 802.3 frame is less than 0x0600.
Signed-off-by: Xiayu Zhang <Xiayu.Zhang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Tianhao Chai [Wed, 1 Dec 2021 02:57:06 +0000 (20:57 -0600)]
ethernet: aquantia: Try MAC address from device tree
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
card, but instead need to obtain MAC addresses from the device tree. In
this case the hardware will report an invalid MAC.
Currently atlantic driver does not query the DT for MAC address and will
randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
This patch causes the driver to perfer a valid MAC address from OF (if
present) over HW self-reported MAC and only fall back to a random MAC
address when neither of them is valid.
Signed-off-by: Tianhao Chai <cth451@gmail.com> Reviewed-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Hector Martin <marcan@marcan.st> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 2 Dec 2021 02:26:35 +0000 (18:26 -0800)]
ipv4: convert fib_num_tclassid_users to atomic_t
Before commit fffe6e0e5011 ("ipv4: Create cleanup helper for fib_nh")
changes to net->ipv4.fib_num_tclassid_users were protected by RTNL.
After the change, this is no longer the case, as free_fib_info_rcu()
runs after rcu grace period, without rtnl being held.
Fixes: fffe6e0e5011 ("ipv4: Create cleanup helper for fib_nh") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Mark Rutland [Mon, 29 Nov 2021 13:57:09 +0000 (13:57 +0000)]
arm64: ftrace: add missing BTIs
When branch target identifiers are in use, code reachable via an
indirect branch requires a BTI landing pad at the branch target site.
When building FTRACE_WITH_REGS atop patchable-function-entry, we miss
BTIs at the start start of the `ftrace_caller` and `ftrace_regs_caller`
trampolines, and when these are called from a module via a PLT (which
will use a `BR X16`), we will encounter a BTI failure, e.g.
Fix this by adding the required `BTI C`, as we only require these to be
reachable via BL for direct calls or BR X16/X17 for PLTs. For now, these
are open-coded in the function prologue, matching the style of the
`__hwasan_tag_mismatch` trampoline.
In future we may wish to consider adding a new SYM_CODE_START_*()
variant which has an implicit BTI.
When ftrace is built atop mcount, the trampolines are marked with
SYM_FUNC_START(), and so get an implicit BTI. We may need to change
these over to SYM_CODE_START() in future for RELIABLE_STACKTRACE, in
case we need to apply special care aroud the return address being
rewritten.
Fixes: f98d65e1502d ("arm64: bti: Provide Kconfig for kernel mode BTI") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Brown <broonie@kernel.org> Cc: Will Deacon <will@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20211129135709.2274019-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Mark Rutland [Tue, 30 Nov 2021 12:18:49 +0000 (12:18 +0000)]
arm64: kexec: use __pa_symbol(empty_zero_page)
In machine_kexec_post_load() we use __pa() on `empty_zero_page`, so that
we can use the physical address during arm64_relocate_new_kernel() to
switch TTBR1 to a new set of tables. While `empty_zero_page` is part of
the old kernel, we won't clobber it until after this switch, so using it
is benign.
However, `empty_zero_page` is part of the kernel image rather than a
linear map address, so it is not correct to use __pa(x), and we should
instead use __pa_symbol(x) or __pa(lm_alias(x)). Otherwise, when the
kernel is built with DEBUG_VIRTUAL, we'll encounter splats as below, as
I've seen when fuzzing v5.16-rc3 with Syzkaller:
With or without DEBUG_VIRTUAL __pa() will fall back to __kimg_to_phys()
for non-linear addresses, and will happen to do the right thing in this
case, even with the warning. But we should not depend upon this, and to
keep the warning useful we should fix this case.
Fix this issue by using __pa_symbol(), which handles kernel image
addresses (and checks its input is a kernel image address). This matches
what we do elsewhere, e.g. in arch/arm64/include/asm/pgtable.h:
Yang Guang [Tue, 30 Nov 2021 00:04:11 +0000 (08:04 +0800)]
ata: replace snprintf in show functions with sysfs_emit
coccinelle report：
./drivers/ata/libata-sata.c:830:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Zhou Qingyang [Tue, 30 Nov 2021 16:50:39 +0000 (00:50 +0800)]
octeontx2-af: Fix a memleak bug in rvu_mbox_init()
In rvu_mbox_init(), mbox_regions is not freed or passed out
under the switch-default region, which could lead to a memory leak.
Fix this bug by changing 'return err' to 'goto free_regions'.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_OCTEONTX2_AF=y show no new warnings,
and our static analyzer no longer warns about this code.
Zhou Qingyang [Tue, 30 Nov 2021 16:44:38 +0000 (00:44 +0800)]
net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and
tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv().
After that mlx4_en_alloc_resources() is called and there is a dereference
of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to
a use after free problem on failure of mlx4_en_copy_priv().
Fix this bug by adding a check of mlx4_en_copy_priv()
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_MLX4_EN=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 9d0750234dbf ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts
in the codepath of vrf device xmit function so that leftover garbage
doesn't cause futher code that uses the CB to incorrectly process the
pkt.
One occasion of the issue might occur when MPLS route uses the vrf
device as the outgoing device such as when the route is added using "ip
-f mpls route add <label> dev <vrf>" command.
The problems seems to exist since day one. Hence I put the day one
commits on the Fixes tags.
Fixes: 9c5f942f99b3 ("net: Introduce VRF device driver") Fixes: d338be79af90 ("net: Add IPv6 support to VRF device") Cc: stable@vger.kernel.org Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhou Qingyang [Tue, 30 Nov 2021 11:08:48 +0000 (19:08 +0800)]
net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
In qlcnic_83xx_add_rings(), the indirect function of
ahw->hw_ops->alloc_mbx_args will be called to allocate memory for
cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(),
which could lead to a NULL pointer dereference on failure of the
indirect function like qlcnic_83xx_alloc_mbx_args().
Fix this bug by adding a check of alloc_mbx_args(), this patch
imitates the logic of mbx_cmd()'s failure handling.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_QLCNIC=m show no new warnings, and our
static analyzer no longer warns about this code.
kprobes: Limit max data_size of the kretprobe instances
The 'kprobe::data_size' is unsigned, thus it can not be negative. But if
user sets it enough big number (e.g. (size_t)-8), the result of 'data_size
+ sizeof(struct kretprobe_instance)' becomes smaller than sizeof(struct
kretprobe_instance) or zero. In result, the kretprobe_instance are
allocated without enough memory, and kretprobe accesses outside of
allocated memory.
To avoid this issue, introduce a max limitation of the
kretprobe::data_size. 4KB per instance should be OK.
The reason is elts->pages[i] is alloced by get_zeroed_page.
and kmemleak will not scan the area alloced by get_zeroed_page.
The address stored in elts->pages will be regarded as leaked.
That is, the elts->pages[i] will have pointers loaded onto it as well, and
without telling kmemleak about it, those pointers will look like memory
without a reference.
To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i]
tracing/histograms: String compares should not care about signed values
When comparing two strings for the "onmatch" histogram trigger, fields
that are strings use string comparisons, which do not care about being
signed or not.
Do not fail to match two string fields if one is unsigned char array and
the other is a signed char array.
Link: https://lore.kernel.org/all/20211129123043.5cfd687a@gandalf.local.home/ Cc: stable@vgerk.kernel.org Cc: Tom Zanussi <zanussi@kernel.org> Cc: Yafang Shao <laoar.shao@gmail.com> Fixes: beb9492445390 ("tracing: Accept different type for synthetic event fields") Reviewed-by: Masami Hiramatsu <mhiramatsu@kernel.org> Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Philip Yang [Mon, 29 Nov 2021 17:33:05 +0000 (12:33 -0500)]
drm/amdkfd: process_info lock not needed for svm
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms
and userptr valid/inval list, svm_range_restore_work and
svm_range_set_attr don't access those, so do not need to take
process_info lock. This will avoid potential circular locking issue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
shaoyunl [Tue, 30 Nov 2021 02:29:05 +0000 (21:29 -0500)]
drm/amdgpu: adjust the kfd reset sequence in reset sriov function
This change revert previous commits: 54af4d05497e ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") a1584b09f7ec ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
This change moves the amdgpu_amdkfd_pre_reset to an earlier place
in amdgpu_device_reset_sriov, presumably to address the sequence issue
that the first patch was originally meant to fix.
Some register access(GRBM_GFX_CNTL) only be allowed on full access
mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov
function.
Fixes: 54af4d05497e ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") Fixes: a1584b09f7ec ("drm/amdgpu: move kfd post_reset out of reset_sriov function") Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Perry Yuan [Fri, 19 Nov 2021 09:27:55 +0000 (04:27 -0500)]
drm/amd/display: add connector type check for CRC source set
[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.
[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.
Philip Yang [Fri, 26 Nov 2021 23:43:09 +0000 (18:43 -0500)]
drm/amdkfd: fix double free mem structure
drm_gem_object_put calls release_notify callback to free the mem
structure and unreserve_mem_limit, move it down after the last access
of mem and make it conditional call.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jimmy Kizito [Mon, 15 Nov 2021 02:48:02 +0000 (21:48 -0500)]
drm/amd/display: Add work around for tunneled MST.
[Why]
Certain USB4 docks do not seem to be able to handle disabling
DSC once it has been enabled on an MST stream. This can result
in blank displays.
[How]
As a work around, always enable DSC on docks exhibiting this issue. The
flag to indicate the use of DSC for MST streams on a USB4 dock is set
during detection of the dock and only cleared when the USB4 dock is
disconnected.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Mustapha Ghaddar [Mon, 15 Nov 2021 22:56:42 +0000 (17:56 -0500)]
drm/amd/display: Fix for the no Audio bug with Tiled Displays
[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.
[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Allow DSC on supported MST branch devices
[Why]
When trying to lightup two 4k60 non-DSC displays behind a branch device
that supports DSC we can't lightup both at once due to bandwidth
limitations - each requires 48 VCPI slots but we only have 63.
[How]
The workaround already exists in the code but is guarded by a CONFIG
that cannot be set by the user and shouldn't need to be.
Check for specific branch device IDs to device whether to enable
the workaround for multiple display scenarios.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Guchun Chen [Fri, 26 Nov 2021 05:06:15 +0000 (13:06 +0800)]
drm/amdgpu: fix the missed handling for SDMA2 and SDMA3
There is no base reg offset or ip_version set for SDMA2
and SDMA3 on SIENNA_CICHLID, so add them.
Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Kevin Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flora Cui [Thu, 18 Nov 2021 08:25:19 +0000 (16:25 +0800)]
drm/amdgpu: check atomic flag to differeniate with legacy path
since vkms support atomic KMS interface
Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Acked-by: Alex Deucher <aleander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flora Cui [Wed, 24 Nov 2021 02:33:38 +0000 (10:33 +0800)]
drm/amdgpu: cancel the correct hrtimer on exit
Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Wed, 1 Dec 2021 18:07:39 +0000 (10:07 -0800)]
Merge tag 'sound-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. A large series is found for ASoC tegra
drivers to correct the control element handlings, while others are
mostly for device-specific quirks and fix-ups"
* tag 'sound-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: hda/hdmi: fix HDA codec entry table order for ADL-P
ALSA: hda: Add Intel DG2 PCI ID and HDMI codec vid
ALSA: hda/cs8409: Set PMSG_ON earlier inside cs8409 driver
ASoC: SOF: hda: reset DAI widget before reconfiguring it
ASoC: cs35l41: Set the max SPI speed for the whole device
ALSA: intel-dsp-config: add quirk for CML devices based on ES8336 codec
ASoC: Intel: soc-acpi: add entry for ESSX8336 on CML
ASoC: rk817: Add module alias for rk817-codec
ASoC: soc-acpi: Set mach->id field on comp_ids matches
ASoC: tegra: Fix kcontrol put callback in Mixer
ASoC: tegra: Fix kcontrol put callback in ADX
ASoC: tegra: Fix kcontrol put callback in AMX
ASoC: tegra: Fix kcontrol put callback in SFC
ASoC: tegra: Fix kcontrol put callback in MVC
ASoC: tegra: Fix kcontrol put callback in AHUB
ASoC: tegra: Fix kcontrol put callback in DSPK
ASoC: tegra: Fix kcontrol put callback in DMIC
ASoC: tegra: Fix kcontrol put callback in I2S
ASoC: tegra: Fix kcontrol put callback in ADMAIF
ASoC: tegra: Fix wrong value type in MVC
...
So I managed to discovered how to fix inband AN for 2500base-x mode on
88E6393x (Amethyst) family.
This series fixes application of erratum 4.8, adds fix for erratum 5.2,
adds support for completely disablign SerDes receiver / transmitter,
fixes inband AN for 2500base-x mode by using 1000base-x mode and simply
changing frequeny to 3.125 GHz, all this for 88E6393X.
The last commit fixes linking when link partner has AN disabled and the
device invokes the AN bypass feature. Currently we fail to link in this
case.
Changes since v1:
- fixed wrong operator in patch 3 (thanks Russell)
- added more comments about why BMCR_ANENABLE is used in patch 6 (thanks
Russell)
- updated some return statements from
if (something)
return func();
return 0;
to
if (something)
err = func();
return err;
(err is set to 0 before the condition)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Behún [Tue, 30 Nov 2021 17:01:51 +0000 (18:01 +0100)]
net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
Function mv88e6xxx_serdes_pcs_get_state() currently does not report link
up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit
is not set, which testing shows is the case for when auto-negotiation
was bypassed (we have AN enabled but link partner does not).
An example of such link partner is Marvell 88X3310 PHY, when put into
the mode where host interface changes between 10gbase-r, 5gbase-r,
2500base-x and sgmii according to copper speed. The 88X3310 does not
enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not
link with it.
Fix this.
Fixes: 860d703ec5b2 ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Behún [Tue, 30 Nov 2021 17:01:50 +0000 (18:01 +0100)]
net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
Inband AN is broken on Amethyst in 2500base-x mode when set by standard
mechanism (via cmode).
(There probably is some weird setting done by default in the switch for
this mode that make it cycle in some state or something, because when
the peer is the mvneta controller, it receives link change interrupts
every ~0.3ms, but the link is always down.)
Get around this by configuring the PCS mode to 1000base-x (where inband
AN works), and then changing the SerDes frequency while SerDes
transmitter and receiver are disabled, before enabling SerDes PHY. After
disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid
confusing the device (if we leave it at 1000base-x PCS mode but with
different frequency, and then change cmode to sgmii, the device won't
change the frequency because it thinks it already has the correct one).
The register which changes the frequency is undocumented. I discovered
it by going through all registers in the ranges 4.f000-4.f100 and
1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x,
5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't
make sense (the value was the same for modes which have different
frequency). The result of this was:
Register 04.f002 is the documented Port Operational Confiuration
register, it's last 3 bits select PCS type, so changing this register
also changes the frequency to the appropriate value.
Registers 04.f076 and 04.f07c are not writable.
Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8
changed SerDes frequency to 3.125 GHz, while leaving the value of PCS
mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation
started working correctly.
(I didn't try anything with register 1e.8140 since 1e.8000 solved the
problem.)
Since I don't have documentation for this register 1e.8000.3:0, I am
using the constants without names, but my hypothesis is that this
register selects PHY frequency. If in the future I have access to an
oscilloscope able to handle these frequencies, I will try to test this
hypothesis.
Fixes: 5fe9fbda56e8 ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Behún [Tue, 30 Nov 2021 17:01:49 +0000 (18:01 +0100)]
net: dsa: mv88e6xxx: Add fix for erratum 5.2 of 88E6393X family
Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r
mode, some undocumented registers need to be written some special
values.
Fixes: 5fe9fbda56e8 ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Behún [Tue, 30 Nov 2021 17:01:48 +0000 (18:01 +0100)]
net: dsa: mv88e6xxx: Save power by disabling SerDes trasmitter and receiver
Save power on 88E6393X by disabling SerDes receiver and transmitter
after SerDes is SerDes is disabled.
Signed-off-by: Marek Behún <kabel@kernel.org> Cc: stable@vger.kernel.org # 5fe9fbda56e8 ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Behún [Tue, 30 Nov 2021 17:01:46 +0000 (18:01 +0100)]
net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393X
According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied
every time before SerDes is powered on.
Split the code for erratum 4.8 into separate function and call it in
mv88e6393x_serdes_power().
Fixes: 5fe9fbda56e8 ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Lyude Paul [Tue, 30 Nov 2021 21:29:09 +0000 (16:29 -0500)]
drm/i915/dp: Perform 30ms delay after source OUI write
While working on supporting the Intel HDR backlight interface, I noticed
that there's a couple of laptops that will very rarely manage to boot up
without detecting Intel HDR backlight support - even though it's supported
on the system. One example of such a laptop is the Lenovo P17 1st
generation.
Following some investigation Ville Syrjälä did through the docs they have
available to them, they discovered that there's actually supposed to be a
30ms wait after writing the source OUI before we begin setting up the rest
of the backlight interface.
This seems to be correct, as adding this 30ms delay seems to have
completely fixed the probing issues I was previously seeing. So - let's
start performing a 30ms wait after writing the OUI, which we do in a manner
similar to how we keep track of PPS delays (e.g. record the timestamp of
the OUI write, and then wait for however many ms are left since that
timestamp right before we interact with the backlight) in order to avoid
waiting any longer then we need to. As well, this also avoids us performing
this delay on systems where we don't end up using the HDR backlight
interface.
V3:
* Move last_oui_write into intel_dp
V2:
* Move panel delays into intel_pps
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Fixes: 63a80843db80 ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211130212912.212044-1-lyude@redhat.com
(cherry picked from commit c7c90b0b8418a97d3aa8b39aae1992908948efad) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Guangming [Fri, 26 Nov 2021 07:49:04 +0000 (15:49 +0800)]
dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow
For previous version, it uses 'sg_table.nent's to traverse sg_table in pages
free flow.
However, 'sg_table.nents' is reassigned in 'dma_map_sg', it means the number of
created entries in the DMA adderess space.
So, use 'sg_table.nents' in pages free flow will case some pages can't be freed.
Here we should use sg_table.orig_nents to free pages memory, but use the
sgtable helper 'for each_sgtable_sg'(, instead of the previous rather common
helper 'for_each_sg' which maybe cause memory leak) is much better.
Fixes: 29b5dcea2e196 ("dma-buf: system_heap: Allocate higher order pages if available") Signed-off-by: Guangming <Guangming.Cao@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: <stable@vger.kernel.org> # 5.11.* Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211126074904.88388-1-guangming.cao@mediatek.com
Ben Ben-Ishay [Sun, 31 Oct 2021 16:31:02 +0000 (18:31 +0200)]
net/mlx5e: SHAMPO, Fix constant expression result
mlx5e_build_shampo_hd_umr uses counters i and index incorrectly
as unsigned, thus the err state err_unmap could stuck in endless loop.
Change i to int to solve the first issue.
Reduce index check to solve the second issue, the caller function
validates that index could not rotate.
Fixes: 7de3d36bcd47 ("net/mlx5e: Add data path for SHAMPO feature") Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Amir Tzin [Wed, 20 Oct 2021 09:45:05 +0000 (12:45 +0300)]
net/mlx5: Fix use after free in mlx5_health_wait_pci_up
The device health recovery flow calls mlx5_health_wait_pci_up() which
queries the device for FW_RESET timeout after freeing the device
timeouts structure on mlx5_function_teardown(). Fix this bug by moving
timeouts structure init/cleanup to the device's init/uninit phases.
Since it is necessary to reset default software timeouts on function
reload, extract setting of defaults values from mlx5_tout_init() and
call mlx5_tout_set_def_val() directly from mlx5_function_setup().
Maor Dickman [Tue, 23 Nov 2021 12:37:11 +0000 (14:37 +0200)]
net/mlx5: E-Switch, Use indirect table only if all destinations support it
When adding rule with multiple destinations, indirect table is used for all of
the destinations if at least one of the destinations support it, this can cause
creation of invalid indirect tables for the destinations that doesn't support it.
Fixed it by using indirect table only if all destinations support it.
Mark Bloch [Thu, 21 Oct 2021 12:46:17 +0000 (12:46 +0000)]
net/mlx5: E-Switch, fix single FDB creation on BlueField
Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL
table for single FDB. Not doing so on BlueField will make firmware fail
the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE)
which is filled in the flow table creation command but as the
other_vport field wasn't set the firmware complains about a bad parameter.
This is different from a regular HCA where the E-Switch manager vport is
the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the
firmware happy both on BlueField and on regular HCAs without special
condition for each.
This fixes the bellow firmware syndrome:
mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4)
Fixes: 55b0701c0551 ("net/mlx5: E-Switch, add logic to enable shared FDB") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Dmytro Linkin [Tue, 21 Sep 2021 12:47:33 +0000 (15:47 +0300)]
net/mlx5: E-switch, Respect BW share of the new group
To enable transmit schduler on vport FW require non-zero configuration
for vport's TSAR. If vport added to the group which has configured BW
share value and TX rate values of the vport are zero, then scheduler
wouldn't be enabled on this vport.
Fix that by calling BW normalization if BW share of the new group is
configured.
Fixes: f6b97bcb1b0d ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Maor Gottlieb [Thu, 18 Nov 2021 10:29:15 +0000 (12:29 +0200)]
net/mlx5: Lag, Fix recreation of VF LAG
Driver needs to nullify the port select attributes of the LAG when
port selection is destroyed, otherwise it breaks recreation of the
LAG.
It fixes the below kernel oops:
Fixes: a5b3c1ca5f2f ("net/mlx5: Lag, add support to create/destroy/modify port selection") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
net/mlx5e: Sync TIR params updates against concurrent create/modify
Transport Interface Receive (TIR) objects perform the packet processing and
reassembly and is also responsible for demultiplexing the packets into the
different RQs.
There are certain TIR context attributes that propagate to the pointed RQs
and applied to them (like packet_merge offloads (LRO/SHAMPO) and
tunneled_offload_en). When TIRs do not agree on attributes values, a "last
one wins" policy is applied. Hence, if not synced properly, a race between
TIR params update and a concurrent TIR create/modify operation might yield
to a mismatch between the shadow parameters in SW and the actual applied
state of the RQs in HW.
tunneled_offload_en is a fixed attribute per profile, while packet merge
offload state might be toggled and get out-of-sync. When this happens,
packet_merge offload might be working although not requested, or the
opposite.
All updates to packet_merge state and all create/modify operations of
regular redirection/steering TIRs are done under the same priv->state_lock,
so they do not run in parallel, and no race is possible.
However, there are other kind of TIRs (acceleration offloads TIRs, like TLS
TIRs) which are created on demand for each new connection without holding
the coarse priv->state_lock, hence might race.
Fix this by synchronizing all packet_merge state reads and writes against
all TIR create/modify operations. Include the modify operations of the
regular redirection steering TIRs under the new lock, for better code
layering and division of responsibilities.
Raed Salem [Thu, 8 Jul 2021 09:48:24 +0000 (12:48 +0300)]
net/mlx5e: Fix missing IPsec statistics on uplink representor
The cited patch added the IPsec support to uplink representor, however
as uplink representors have his private statistics where IPsec stats
is not part of it, that effectively makes IPsec stats hidden when uplink
representor stats queried.
Resolve by adding IPsec stats to uplink representor private statistics.
Fixes: b9faaa0f5b6c ("net/mlx5e: Add IPsec support to uplink representor") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Raed Salem [Wed, 17 Nov 2021 11:33:57 +0000 (13:33 +0200)]
net/mlx5e: IPsec: Fix Software parser inner l3 type setting in case of encapsulation
Current code wrongly uses the skb->protocol field which reflects the
outer l3 protocol to set the inner l3 type in Software Parser (SWP)
fields settings in the ethernet segment (eseg) in flows where inner
l3 exists like in Vxlan over ESP flow, the above method wrongly use
the outer protocol type instead of the inner one. thus breaking cases
where inner and outer headers have different protocols.
Fix by setting the inner l3 type in SWP according to the inner l3 ip
header version.
Randy Dunlap [Tue, 30 Nov 2021 06:39:47 +0000 (22:39 -0800)]
natsemi: xtensa: fix section mismatch warnings
Fix section mismatch warnings in xtsonic. The first one appears to be
bogus and after fixing the second one, the first one is gone.
WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices()
The function sonic_get_stats() references
the function __init set_reset_devices().
This is often because sonic_get_stats lacks a __init
annotation or the annotation of set_reset_devices is wrong.
WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1()
The function xtsonic_probe() references
the function __init sonic_probe1().
This is often because xtsonic_probe lacks a __init
annotation or the annotation of sonic_probe1 is wrong.
Fixes: 01b799412c82 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20211130063947.7529-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: netlink: af_netlink: Prevent empty skb by adding a check on len.
Adding a check on len parameter to avoid empty skb. This prevents a
division error in netem_enqueue function which is caused when skb->len=0
and skb->data_len=0 in the randomized corruption step as shown below.
random.c is a bit understaffed, and folks want more prompt reviews. I've
got the crypto background and the interest to do these reviews, and have
authored parts of the file already.
Cc: Theodore Ts'o <tytso@mit.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 30 Nov 2021 17:22:15 +0000 (09:22 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix constant sign extension affecting TCR_EL2 and preventing
running on ARMv8.7 models due to spurious bits being set
- Fix use of helpers using PSTATE early on exit by always sampling it
as soon as the exit takes place
- Move pkvm's 32bit handling into a common helper
RISC-V:
- Fix incorrect KVM_MAX_VCPUS value
- Unmap stage2 mapping when deleting/moving a memslot
x86:
- Fix and downgrade BUG_ON due to uninitialized cache
- Many APICv and MOVE_ENC_CONTEXT_FROM fixes
- Correctly emulate TLB flushes around nested vmentry/vmexit and when
the nested hypervisor uses VPID
- Prevent modifications to CPUID after the VM has run
- Other smaller bugfixes
Generic:
- Memslot handling bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
KVM: fix avic_set_running for preemptable kernels
KVM: VMX: clear vmx_x86_ops.sync_pir_to_irr if APICv is disabled
KVM: SEV: accept signals in sev_lock_two_vms
KVM: SEV: do not take kvm->lock when destroying
KVM: SEV: Prohibit migration of a VM that has mirrors
KVM: SEV: Do COPY_ENC_CONTEXT_FROM with both VMs locked
selftests: sev_migrate_tests: add tests for KVM_CAP_VM_COPY_ENC_CONTEXT_FROM
KVM: SEV: move mirror status to destination of KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
KVM: SEV: initialize regions_list of a mirror VM
KVM: SEV: cleanup locking for KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
KVM: SEV: do not use list_replace_init on an empty list
KVM: x86: Use a stable condition around all VT-d PI paths
KVM: x86: check PIR even for vCPUs with disabled APICv
KVM: VMX: prepare sync_pir_to_irr for running with APICv disabled
KVM: selftests: page_table_test: fix calculation of guest_test_phys_mem
KVM: x86/mmu: Handle "default" period when selectively waking kthread
KVM: MMU: shadow nested paging does not have PKU
KVM: x86/mmu: Remove spurious TLB flushes in TDP MMU zap collapsible path
KVM: x86/mmu: Use yield-safe TDP MMU root iter in MMU notifier unmapping
KVM: X86: Use vcpu->arch.walk_mmu for kvm_mmu_invlpg()
...
Commit a6fa1762fed1 ("include/linux/radix-tree.h: replace kernel.h with
the necessary inclusions") broke the radix tree test suite in two
different ways; first by including math.h which didn't exist in the
tools directory, and second by removing an implicit include of
spinlock.h before lockdep.h. Fix both issues.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Paolo Bonzini [Tue, 30 Nov 2021 08:46:07 +0000 (03:46 -0500)]
KVM: fix avic_set_running for preemptable kernels
avic_set_running() passes the current CPU to avic_vcpu_load(), albeit
via vcpu->cpu rather than smp_processor_id(). If the thread is migrated
while avic_set_running runs, the call to avic_vcpu_load() can use a stale
value for the processor id. Avoid this by blocking preemption over the
entire execution of avic_set_running().
Reported-by: Sean Christopherson <seanjc@google.com> Fixes: af9badde83f5 ("svm: Manage vcpu load/unload when enable AVIC") Cc: stable@vger.kernel.org Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Karsten Graul [Tue, 30 Nov 2021 07:33:58 +0000 (08:33 +0100)]
MAINTAINERS: s390/net: add Alexandra and Wenjia as maintainer
Add Alexandra and Wenjia as maintainers for drivers/s390/net and iucv.
Also, remove myself as maintainer for these areas.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dongliang Mu [Tue, 30 Nov 2021 04:05:54 +0000 (12:05 +0800)]
dpaa2-eth: destroy workqueue at the end of remove function
The commit 9289bbe02a82 ("dpaa2-eth: support PTP Sync packet one-step
timestamping") forgets to destroy workqueue at the end of remove
function.
Fix this by adding destroy_workqueue before fsl_mc_portal_free and
free_netdev.
Fixes: 9289bbe02a82 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ice: xsk: clear status_error0 for each allocated desc
Fix a bug in which the receiving of packets can stop in the zero-copy
driver. Ice HW ignores 3 lower bits from QRX_TAIL register, which means
that tail is bumped only on intervals of 8. Currently with XSK RX
batching in place, ice_alloc_rx_bufs_zc() clears the status_error0 only
of the last descriptor that has been allocated/taken from the XSK buffer
pool. status_error0 includes DD bit that is looked upon by the
ice_clean_rx_irq_zc() to tell if a descriptor can be processed.
The bug can be triggered when driver updates the ntu but not the
QRX_TAIL, so HW wouldn't have a chance to write to the ready
descriptors. Later on driver moves the ntc to the mentioned set of
descriptors and interprets them as a ready to be processed, since
corresponding DD bits were not cleared nor any writeback has happened
that would clear it. This can then lead to ntc == ntu case which means
that ring is empty and no further packet processing.
Fix the XSK traffic hang that can be observed when l2fwd scenario from
xdpsock is used by making sure that status_error0 is cleared for each
descriptor that is fed to HW and therefore we are sure that driver will
not processed non-valid DD bits. This will also prevent the driver from
processing the descriptors that were allocated in favor of the
previously processed ones, but writeback didn't happen yet.
Fixes: a676410fb696 ("ice: Use the xsk batched rx allocation interface") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: marvell: mvpp2: Fix the computation of shared CPUs
'bitmap_fill()' fills a bitmap one 'long' at a time.
It is likely that an exact number of bits is expected.
Use 'bitmap_set()' instead in order not to set unexpected bits.
Fixes: bf2889aeeadc ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
i2c: stm32f7: use proper DMAENGINE API for termination
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we use dmaengine_terminate_sync in
i2c_xfer and i2c_smbus_xfer handlers and rely on
dmaengine_terminate_async within interrupt handlers
(transmission error cases).
dmaengine_synchronize is added within i2c_xfer and i2c_smbus_xfer handler
to finalize terminate started in interrupt handlers.
In case of receiving a NACK, the dma transfer should be stopped
to avoid feeding data into the FIFO.
Also ensure to properly return the proper error code and avoid
waiting for the end of the dma completion in case of
error happening during the transmission.
Paolo Bonzini [Tue, 23 Nov 2021 00:50:36 +0000 (19:50 -0500)]
KVM: SEV: accept signals in sev_lock_two_vms
Generally, kvm->lock is not taken for a long time, but
sev_lock_two_vms is different: it takes vCPU locks
inside, so userspace can hold it back just by calling
a vCPU ioctl. Play it safe and use mutex_lock_killable.
Message-Id: <20211123005036.2954379-13-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 Nov 2021 00:50:35 +0000 (19:50 -0500)]
KVM: SEV: do not take kvm->lock when destroying
Taking the lock is useless since there are no other references,
and there are already accesses (e.g. to sev->enc_context_owner)
that do not take it. So get rid of it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-12-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 Nov 2021 00:50:34 +0000 (19:50 -0500)]
KVM: SEV: Prohibit migration of a VM that has mirrors
VMs that mirror an encryption context rely on the owner to keep the
ASID allocated. Performing a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM
would cause a dangling ASID:
1. copy context from A to B (gets ref to A)
2. move context from A to L (moves ASID from A to L)
3. close L (releases ASID from L, B still references it)
The right way to do the handoff instead is to create a fresh mirror VM
on the destination first:
1. copy context from A to B (gets ref to A)
[later] 2. close B (releases ref to A)
3. move context from A to L (moves ASID from A to L)
4. copy context from L to M
So, catch the situation by adding a count of how many VMs are
mirroring this one's encryption context.
Fixes: 697b9f909d28 ("KVM: SEV: Add support for SEV-ES intra host migration")
Message-Id: <20211123005036.2954379-11-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 23 Nov 2021 00:50:33 +0000 (19:50 -0500)]
KVM: SEV: Do COPY_ENC_CONTEXT_FROM with both VMs locked
Now that we have a facility to lock two VMs with deadlock
protection, use it for the creation of mirror VMs as well. One of
COPY_ENC_CONTEXT_FROM(dst, src) and COPY_ENC_CONTEXT_FROM(src, dst)
would always fail, so the combination is nonsensical and it is okay to
return -EBUSY if it is attempted.
This sidesteps the question of what happens if a VM is
MOVE_ENC_CONTEXT_FROM'd at the same time as it is
COPY_ENC_CONTEXT_FROM'd: the locking prevents that from
happening.
Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211123005036.2954379-10-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / kernel.git / log