Merge branch 'ax88772-phylib'

Oleksij Rempel says:

====================
port asix ax88772 to the PHYlib

changes v2:
- add Reviewed-by: Andrew Lunn <andrew@lunn.ch> to some patches
- refactor asix_read_phy_addr() and add error handling for all callers
- refactor asix_mdio_bus_read()

Port ax88772 part of asix driver to the phylib to be able to use more
advanced external PHY attached to this controller.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

usbnet: run unbind() before unregister_netdev()

unbind() is the proper place to disconnect PHY, but it will fail if
netdev is already unregistered.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: do not print dump stack if device was removed

In case phy_state_machine() works on top of USB device, we can get -ENODEV
at any point. So, be less noisy if device was removed.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: add error handling for asix_mdio_* functions

This usb devices can be removed at any time, so we need to forward
correct error value if device was detached.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: ax88772: add generic selftest support

With working phylib support we are able now to use generic selftests.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: ax88772: add phylib support

To be able to use ax88772 with external PHYs and use advantage of
existing PHY drivers, we need to port at least ax88772 part of asix
driver to the phylib framework.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb/phy: asix: add support for ax88772A/C PHYs

Add support for build-in x88772A/C PHYs

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: refactor asix_read_phy_addr() and handle errors on return

Refactor asix_read_phy_addr() to return usable error value directly and
make sure all callers handle this error.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: usb: asix: ax88772_bind: use devm_kzalloc() instead of kzalloc()

Make resource management easier, use devm_kzalloc().

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: gemini: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

atm: [br2864] fix spelling mistakes

interrupt should be changed to interrupting.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: hellcreek: Use is_zero_ether_addr() instead of memcmp()

Using is_zero_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is all
zeros.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

pktgen: add pktgen_handle_all_threads() for the same code

The pktgen_{run, reset, stop}_all_threads() has the same code,
so add pktgen_handle_all_threads() for it.

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio_net: Remove BUG() to avoid machine dead

We should not directly BUG() when there is hdr error, it is
better to output a print when such error happens. Currently,
the caller of xmit_skb() already did it.

Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: ixp4xx_eth: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: lantiq: Use devm_platform_get_and_ioremap_resource()

Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net

Bug fixes overlapping feature additions and refactoring, mostly.

Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_lookup_leaf()

Add description for parameters of htb_lookup_leaf()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:773: warning: Function parameter or member 'hprio' not described in 'htb_lookup_leaf'
net/sched/sch_htb.c:773: warning: Function parameter or member 'prio' not described in 'htb_lookup_leaf'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_do_events()

Add description for parameters of htb_do_events()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:708: warning: Function parameter or member 'q' not described in 'htb_do_events'
net/sched/sch_htb.c:708: warning: Function parameter or member 'level' not described in 'htb_do_events'
net/sched/sch_htb.c:708: warning: Function parameter or member 'start' not described in 'htb_do_events'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_charge_class()

Add description for parameters of htb_charge_class()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:663: warning: Function parameter or member 'q' not described in 'htb_charge_class'
net/sched/sch_htb.c:663: warning: Function parameter or member 'cl' not described in 'htb_charge_class'
net/sched/sch_htb.c:663: warning: Function parameter or member 'level' not described in 'htb_charge_class'
net/sched/sch_htb.c:663: warning: Function parameter or member 'skb' not described in 'htb_charge_class'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_deactivate()

Add description for parameters of htb_deactivate()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:578: warning: Function parameter or member 'q' not described in 'htb_deactivate'
net/sched/sch_htb.c:578: warning: Function parameter or member 'cl' not described in 'htb_deactivate'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_activate()

Add description for parameters of htb_activate()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:562: warning: Function parameter or member 'q' not described in 'htb_activate'
net/sched/sch_htb.c:562: warning: Function parameter or member 'cl' not described in 'htb_activate'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_change_class_mode()

Add description for parameters of htb_change_class_mode()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:533: warning: Function parameter or member 'q' not described in 'htb_change_class_mode'
net/sched/sch_htb.c:533: warning: Function parameter or member 'cl' not described in 'htb_change_class_mode'
net/sched/sch_htb.c:533: warning: Function parameter or member 'diff' not described in 'htb_change_class_mode'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_class_mode()

Add description for parameters of htb_class_mode()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:507: warning: Function parameter or member 'cl' not described in 'htb_class_mode'
net/sched/sch_htb.c:507: warning: Function parameter or member 'diff' not described in 'htb_class_mode'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_deactivate_prios()

Add description for parameters of htb_deactivate_prios()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:442: warning: Function parameter or member 'q' not described in 'htb_deactivate_prios'
net/sched/sch_htb.c:442: warning: Function parameter or member 'cl' not described in 'htb_deactivate_prios'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_activate_prios()

Add description for parameters of htb_activate_prios()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:407: warning: Function parameter or member 'q' not described in 'htb_activate_prios'
net/sched/sch_htb.c:407: warning: Function parameter or member 'cl' not described in 'htb_activate_prios'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_remove_class_from_row()

Add description for parameters of htb_remove_class_from_row()
to fix gcc W=1 warnings:

net/sched/sch_htb.c:380: warning: Function parameter or member 'q' not described in 'htb_remove_class_from_row'
net/sched/sch_htb.c:380: warning: Function parameter or member 'cl' not described in 'htb_remove_class_from_row'
net/sched/sch_htb.c:380: warning: Function parameter or member 'mask' not described in 'htb_remove_class_from_row'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_add_class_to_row()

Add description for parameters of htb_add_class_to_row() to fix
gcc W=1 warnings:

net/sched/sch_htb.c:351: warning: Function parameter or member 'q' not described in 'htb_add_class_to_row'
net/sched/sch_htb.c:351: warning: Function parameter or member 'cl' not described in 'htb_add_class_to_row'
net/sched/sch_htb.c:351: warning: Function parameter or member 'mask' not described in 'htb_add_class_to_row'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_next_rb_node()

Add description for parameters of htb_next_rb_node() to fix
gcc W=1 warnings:

net/sched/sch_htb.c:339: warning: Function parameter or member 'n' not described in 'htb_next_rb_node'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_add_to_wait_tree()

Add description for parameters of htb_add_to_wait_tree() to fix
gcc W=1 warnings:

net/sched/sch_htb.c:308: warning: Function parameter or member 'q' not described in 'htb_add_to_wait_tree'
net/sched/sch_htb.c:308: warning: Function parameter or member 'cl' not described in 'htb_add_to_wait_tree'
net/sched/sch_htb.c:308: warning: Function parameter or member 'delay' not described in 'htb_add_to_wait_tree'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hd6470-cleanups'

Peng Li says:

====================
net: hd64570: clean up some code style issues

This patchset clean up some code style issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: add some required spaces

Add space required before the open parenthesis '('.
Add space required after that close brace '}'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: remove redundant parentheses

Remove redundant parentheses around 'cda >= desc_off'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: fix the comments style issue

Block comments use * on subsequent lines.
Block comments use a trailing */ on a separate line.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: add braces {} to all arms of the statement

Braces {} should be used on all arms of this statement.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: fix the code style issue about trailing statements

Trailing statements should be on next line.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: fix the code style issue about "foo* bar"

Fix the checkpatch error as "foo* bar" and should be "foo *bar",
and "(foo*)" should be "(foo *)".

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: add blank line after declarations

This patch fixes the checkpatch error about missing a blank line
after declarations.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hd64570: remove redundant blank lines

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sja1105-yaml'

Vladimir Oltean says:

====================
Convert NXP SJA1105 DSA driver to YAML

This is an attempt to convert the SJA1105 driver to the YAML schema.

The SJA1105 driver has some custom device tree properties which caused
validation problems in the previous attempt:
https://patchwork.kernel.org/project/netdevbpf/patch/20210531234735.1582031-1-olteanv@gmail.com/

So now we are removing them, hoping that this will make the conversion
easier to accept.

In order to do that, we introduce a new PHY interface type, "reverse RMII",
which is like "reverse MII" (aka MII as a PHY) but for the reduced data
width version of the protocol. This is a direct replacement for an rmii
fixed-link. Now, rmii fixed-link interfaces behave as a MAC, and rev-rmii
fixed-link interfaces behave as a PHY.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

dt-bindings: net: dsa: sja1105: convert to YAML schema

Since the sja1105 driver no longer has any custom device tree
properties, the conversion is trivial.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: determine PHY/MAC role from PHY interface type

Now that both RevMII as well as RevRMII exist, we can deprecate the
sja1105,role-mac and sja1105,role-phy properties and simply let the user
select that a port operates in MII PHY role by using
phy-mode = "rev-mii";
or in RMII PHY role by using
phy-mode = "rev-rmii";

There are no fixed-link MII or RMII properties in mainline device trees,
and the setup itself is fairly uncommon, so there shouldn't be risks of
breaking compatibility.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: apply RGMII delays based on the fixed-link property

The sja1105 driver has an intermediate way of determining whether the
RGMII delays should be applied by the PHY or by itself: by looking at
the port role (PHY or MAC). The port can be put in the PHY role either
explicitly (sja1105,role-phy) or implicitly (fixed-link).

We want to deprecate the sja1105,role-phy property, so all that remains
is the fixed-link property. Introduce a "fixed_link" array of booleans
in the driver, and use that to determine whether RGMII delays must be
applied or not.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: introduce PHY_INTERFACE_MODE_REVRMII

The "reverse RMII" protocol name is a personal invention, derived from
"reverse MII".

Just like MII, RMII is an asymmetric protocol in that a PHY behaves
differently than a MAC. In the case of RMII, for example:
- the 50 MHz clock signals are either driven by the MAC or by an
  external oscillator (but never by the PHY).
- the PHY can transmit extra in-band control symbols via RXD[1:0] which
  the MAC is supposed to understand, but a PHY isn't.

The "reverse MII" protocol is not standardized either, except for this
web document:
https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/#

In short, it means that the Ethernet controller speaks the 4-bit data
parallel protocol from the perspective of a PHY (it acts like a PHY).
This might mean that it implements clause 22 compatible registers,
although that is optional - the important bit is that its pins can be
connected to an MII MAC and it will 'just work'.

In this discussion thread:
https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/

we agreed that it would be an abuse of terms to use the "RevMII" name
for anything than the 4-bit parallel MII protocol. But since all the
same concepts can be applied to the 2-bit Reduced MII protocol as well,
here we are introducing a "Reverse RMII" protocol. This means: "behave
like an RMII PHY".

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: xrs700x: allow HSR/PRP supervision dupes for node_table

Add an inbound policy filter which matches the HSR/PRP supervision
MAC range and forwards to the CPU port without discarding duplicates.
This is required to correctly populate time_in[A] and time_in[B] in the
HSR/PRP node_table. Leave the policy disabled by default and
enable/disable it when joining/leaving hsr.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net:cxgb3: fix incorrect work cancellation

In my last changes in commit 105518082b23 I introduced a copy-paste bug,
leading to cancel twice qresume_task work for OFLD queue, and never the
one for CTRL queue. This patch cancels correctly both works.

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

cxgb4: avoid link re-train during TC-MQPRIO configuration

When configuring TC-MQPRIO offload, only turn off netdev carrier and
don't bring physical link down in hardware. Otherwise, when the
physical link is brought up again after configuration, it gets
re-trained and stalls ongoing traffic.

Also, when firmware is no longer accessible or crashed, avoid sending
FLOWC and waiting for reply that will never come.

Fix following hung_task_timeout_secs trace seen in these cases.

INFO: task tc:20807 blocked for more than 122 seconds.
      Tainted: G S                5.13.0-rc3+ #122
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:tc   state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000
Call Trace:
 __schedule+0x27b/0x6a0
 schedule+0x37/0xa0
 schedule_preempt_disabled+0x5/0x10
 __mutex_lock.isra.14+0x2a0/0x4a0
 ? netlink_lookup+0x120/0x1a0
 ? rtnl_fill_ifinfo+0x10f0/0x10f0
 __netlink_dump_start+0x70/0x250
 rtnetlink_rcv_msg+0x28b/0x380
 ? rtnl_fill_ifinfo+0x10f0/0x10f0
 ? rtnl_calcit.isra.42+0x120/0x120
 netlink_rcv_skb+0x4b/0xf0
 netlink_unicast+0x1a0/0x280
 netlink_sendmsg+0x216/0x440
 sock_sendmsg+0x56/0x60
 __sys_sendto+0xe9/0x150
 ? handle_mm_fault+0x6d/0x1b0
 ? do_user_addr_fault+0x1c5/0x620
 __x64_sys_sendto+0x1f/0x30
 do_syscall_64+0x3c/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7f73218321
RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321
RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003
RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6
R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0

Fixes: c4c2f7e2018c ("cxgb4: parse and configure TC-MQPRIO offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix refcount leak in htb_parent_to_leaf_offload

The commit d20a010d389d ("sch_htb: fix null pointer dereference
on a null new_q") fixes a NULL pointer dereference bug, but it
is not correct.

Because htb_graft_helper properly handles the case when new_q
is NULL, and after the previous patch by skipping this call
which creates an inconsistency : dev_queue->qdisc will still
point to the old qdisc, but cl->parent->leaf.q will point to
the new one (which will be noop_qdisc, because new_q was NULL).
The code is based on an assumption that these two pointers are
the same, so it can lead to refcount leaks.

The correct fix is to add a NULL pointer check to protect
qdisc_refcount_inc inside htb_parent_to_leaf_offload.

Fixes: d20a010d389d ("sch_htb: fix null pointer dereference on a null new_q")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Suggested-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bridge: mrp: Update ring transitions.

According to the standard IEC 62439-2, the number of transitions needs
to be counted for each transition 'between' ring state open and ring
state closed and not from open state to closed state.

Therefore fix this for both ring and interconnect ring.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: enetc: use get/put_unaligned helpers for MAC address handling

The supplied buffer for the MAC address might not be aligned. Thus
doing a 32bit (or 16bit) access could be on an unaligned address. For
now, enetc is only used on aarch64 which can do unaligned accesses, thus
there is no error. In any case, be correct and use the get/put_unaligned
helpers.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hdlc_x25-cleanups'

Peng Li says:

====================
net: hdlc_x25: clean up some code style issues

This patchset clean up some code style issues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: hdlc_x25: fix the alignment issue

Alignment should match open parenthesis.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hdlc_x25: fix the code issue about "if..else.."

According to the chackpatch.pl, else should follow close brace '}'.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hdlc_x25: add some required spaces

Add spaces required around that '='.
Add space required after that ','.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hdlc_x25: move out assignment in if condition

Should not use assignment in if condition.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hdlc_x25: remove unnecessary out of memory message

This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hdlc_x25: remove redundant blank lines

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-06-04

This series contains updates to igc driver only.

Sasha utilizes the newly introduced ethtool_sprintf() function, removes
unused defines, and fixes indentation.

Muhammad adds support for hardware VLAN insertion and stripping.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-06-04

This series contains updates to virtchnl header file and ice driver.

Brett fixes VF being unable to request a different number of queues then
allocated and adds clearing of VF_MBX_ATQLEN register for VF reset.

Haiyue handles error of rebuilding VF VSI during reset.

Paul fixes reporting of autoneg to use the PHY capabilities.

Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be
transmitted.

Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs
structure in the virtchnl header file.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'wireguard-fixes'

Jason A. Donenfeld says:

====================
wireguard fixes for 5.13-rc5

Here are bug fixes to WireGuard for 5.13-rc5:

1-2,6) These are small, trivial tweaks to our test harness.

3) Linus thinks -O3 is still dangerous to enable. The code gen wasn't so
   much different with -O2 either.

4) We were accidentally calling synchronize_rcu instead of
   synchronize_net while holding the rtnl_lock, resulting in some rather
   large stalls that hit production machines.

5) Peer allocation was wasting literally hundreds of megabytes on real
   world deployments, due to oddly sized large objects not fitting
   nicely into a kmalloc slab.

7-9) We move from an insanely expensive O(n) algorithm to a fast O(1)
     algorithm, and cleanup a massive memory leak in the process, in
     which allowed ips churn would leave danging nodes hanging around
     without cleanup until the interface was removed. The O(1) algorithm
     eliminates packet stalls and high latency issues, in addition to
     bringing operations that took as much as 10 minutes down to less
     than a second.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: allowedips: free empty intermediate nodes when removing single node

When removing single nodes, it's possible that that node's parent is an
empty intermediate node, in which case, it too should be removed.
Otherwise the trie fills up and never is fully emptied, leading to
gradual memory leaks over time for tries that are modified often. There
was originally code to do this, but was removed during refactoring in
2016 and never reworked. Now that we have proper parent pointers from
the previous commits, we can implement this properly.

In order to reduce branching and expensive comparisons, we want to keep
the double pointer for parent assignment (which lets us easily chain up
to the root), but we still need to actually get the parent's base
address. So encode the bit number into the last two bits of the pointer,
and pack and unpack it as needed. This is a little bit clumsy but is the
fastest and less memory wasteful of the compromises. Note that we align
the root struct here to a minimum of 4, because it's embedded into a
larger struct, and we're relying on having the bottom two bits for our
flag, which would only be 16-bit aligned on m68k.

The existing macro-based helpers were a bit unwieldy for adding the bit
packing to, so this commit replaces them with safer and clearer ordinary
functions.

We add a test to the randomized/fuzzer part of the selftests, to free
the randomized tries by-peer, refuzz it, and repeat, until it's supposed
to be empty, and then then see if that actually resulted in the whole
thing being emptied. That combined with kmemcheck should hopefully make
sure this commit is doing what it should. Along the way this resulted in
various other cleanups of the tests and fixes for recent graphviz.

Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: allowedips: allocate nodes in kmem_cache

The previous commit moved from O(n) to O(1) for removal, but in the
process introduced an additional pointer member to a struct that
increased the size from 60 to 68 bytes, putting nodes in the 128-byte
slab. With deployed systems having as many as 2 million nodes, this
represents a significant doubling in memory usage (128 MiB -> 256 MiB).
Fix this by using our own kmem_cache, that's sized exactly right. This
also makes wireguard's memory usage more transparent in tools like
slabtop and /proc/slabinfo.

Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: allowedips: remove nodes in O(1)

Previously, deleting peers would require traversing the entire trie in
order to rebalance nodes and safely free them. This meant that removing
1000 peers from a trie with a half million nodes would take an extremely
long time, during which we're holding the rtnl lock. Large-scale users
were reporting 200ms latencies added to the networking stack as a whole
every time their userspace software would queue up significant removals.
That's a serious situation.

This commit fixes that by maintaining a double pointer to the parent's
bit pointer for each node, and then using the already existing node list
belonging to each peer to go directly to the node, fix up its pointers,
and free it with RCU. This means removal is O(1) instead of O(n), and we
don't use gobs of stack.

The removal algorithm has the same downside as the code that it fixes:
it won't collapse needlessly long runs of fillers.  We can enhance that
in the future if it ever becomes a problem. This commit documents that
limitation with a TODO comment in code, a small but meaningful
improvement over the prior situation.

Currently the biggest flaw, which the next commit addresses, is that
because this increases the node size on 64-bit machines from 60 bytes to
68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up
using twice as much memory per node, because of power-of-two
allocations, which is a big bummer. We'll need to figure something out
there.

Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: allowedips: initialize list head in selftest

The randomized trie tests weren't initializing the dummy peer list head,
resulting in a NULL pointer dereference when used. Fix this by
initializing it in the randomized trie test, just like we do for the
static unit test.

While we're at it, all of the other strings like this have the word
"self-test", so add it to the missing place here.

Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: peer: allocate in kmem_cache

With deployments having upwards of 600k peers now, this somewhat heavy
structure could benefit from more fine-grained allocations.
Specifically, instead of using a 2048-byte slab for a 1544-byte object,
we can now use 1544-byte objects directly, thus saving almost 25%
per-peer, or with 600k peers, that's a savings of 303 MiB. This also
makes wireguard's memory usage more transparent in tools like slabtop
and /proc/slabinfo.

Fixes: e7f76ac487b1 ("wireguard: queueing: get rid of per-peer ring buffers")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: use synchronize_net rather than synchronize_rcu

Many of the synchronization points are sometimes called under the rtnl
lock, which means we should use synchronize_net rather than
synchronize_rcu. Under the hood, this expands to using the expedited
flavor of function in the event that rtnl is held, in order to not stall
other concurrent changes.

This fixes some very, very long delays when removing multiple peers at
once, which would cause some operations to take several minutes.

Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: do not use -O3

Apparently, various versions of gcc have O3-related miscompiles. Looking
at the difference between -O2 and -O3 for gcc 11 doesn't indicate
miscompiles, but the difference also doesn't seem so significant for
performance that it's worth risking.

Link: https://lore.kernel.org/lkml/CAHk-=wjuoGyxDhAF8SsrTkN0-YfCx7E6jUN3ikC_tn2AKWTTsA@mail.gmail.com/
Link: https://lore.kernel.org/lkml/CAHmME9otB5Wwxp7H8bR_i2uH2esEMvoBMC8uEXBMH9p0q1s6Bw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: selftests: make sure rp_filter is disabled on vethc

Some distros may enable strict rp_filter by default, which will prevent
vethc from receiving the packets with an unrouteable reverse path address.

Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: selftests: remove old conntrack kconfig value

On recent kernels, this config symbol is no longer used.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: 4dff5496e367 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: Return the correct errno code

When kalloc or kmemdup failed, should return ENOMEM rather than ENOBUF.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'mptcp-timestamps'

Mat Martineau says:

====================
mptcp: Add timestamp support

Enable the SO_TIMESTAMP and SO_TIMESTAMPING socket options for MPTCP
sockets and add receive path cmsg support for timestamps.

Patches 1, 2, and 5 expose existing sock and tcp helpers for timestamps
(no new EXPORT_SYMBOLS()s).

Patch 3 propagates timestamp options to subflows.

Patch 4 cleans up MPTCP handling of SOL_SOCKET options.

Patch 6 adds timestamp csmg data when receiving on sockets that have
been configured for timestamps.

Patch 7 adds self test coverage for timestamps.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mptcp_connect: add SO_TIMESTAMPNS cmsg support

This extends the existing setsockopt test case to also check for cmsg
timestamps.

mptcp_connect will abort/fail if the setockopt was passed but the
timestamp cmsg isn't present after successful recvmsg().

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: receive path cmsg support

This adds support for SO_TIMESTAMP(NS).  Timestamps are passed to
userspace in the same way as for plain tcp sockets.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: export timestamp helpers for mptcp

MPTCP is builtin, so no need to add EXPORT_SYMBOL()s.

It will be used to support SO_TIMESTAMP(NS) ancillary
messages in the mptcp receive path.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: setsockopt: handle SOL_SOCKET in one place only

Move the pre-check to the function that handles all SOL_SOCKET values.

At this point there is complete coverage for all values that were
accepted by the pre-check.

BUSYPOLL functions are accepted but will not have any functionality
yet until its clear how the expected mptcp behaviour should look like.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mptcp: sockopt: propagate timestamp request to subflows

This adds support for TIMESTAMP(NS) setsockopt.

This doesn't make things work yet, because the mptcp receive path
doesn't convert the skb timestamps to cmsgs for userspace consumption.

receive path cmsg support is added ina followup patch.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sock: expose so_timestamping options for mptcp

Similar to previous patch: expose SO_TIMESTAMPING helper so we do not
have to copy & paste this into the mptcp core.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sock: expose so_timestamp options for mptcp

This exports SO_TIMESTAMP_* function for re-use by MPTCP.

Without this there is too much copy & paste needed to support
this from mptcp setsockopt path.

Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

igc: Enable HW VLAN Insertion and HW VLAN Stripping

Add HW VLAN acceleration protocol handling. In case of HW VLAN tagging,
we need that protocol available in the ndo_start_xmit(), so that it will be
stored in a new fields in the skb.

HW offloading is set to OFF by default.
Users are allow to turn on/off Rx/Tx HW VLAN acceleration via ethtool.

Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Indentation fixes

Minor fix of indentation in igc_defines.h

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Remove unused MDICNFG register

The MDICNFG register from igc registers is not used so remove it.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Remove unused asymmetric pause bit from igc defines

The CR_1000T_ASYM_PAUSE bit from igc defines is not used so remove it.

Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

igc: Update driver to use ethtool_sprintf

Complete to commit 336ab24e8a43 ("intel: Update drivers to use
ethtool_sprintf")
Update the igc driver to make use of ethtool_sprintf. The general idea
is to reduce code size and overhead by replacing the repeated pattern of
string printf statements and ETH_STRING_LEN counter increments.

Suggested-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

virtchnl: Add missing padding to virtchnl_proto_hdrs

On m68k (Coldfire M547x):

      CC      drivers/net/ethernet/intel/i40e/i40e_main.o
    In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9,
     from drivers/net/ethernet/intel/i40e/i40e.h:41,
     from drivers/net/ethernet/intel/i40e/i40e_main.c:12:
    include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero]
      153 |  { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
  |                                    ^
    include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
      844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
  | ^~~~~~~~~~~~~~~~~~~~~~~~~
    include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant
      844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
  |                                 ^~~~~~~~~~~~~~~~~~~

On m68k, integers are aligned on addresses that are multiples of two,
not four, bytes.  Hence the size of a structure containing integers may
not be divisible by 4.

Fix this by adding explicit padding.

Fixes: 116686042684261c ("ice: Enable FDIR Configure for AVF")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Allow all LLDP packets from PF to Tx

Currently in the ice driver, the check whether to
allow a LLDP packet to egress the interface from the
PF_VSI is being based on the SKB's priority field.
It checks to see if the packets priority is equal to
TC_PRIO_CONTROL.  Injected LLDP packets do not always
meet this condition.

SCAPY defaults to a sk_buff->protocol value of ETH_P_ALL
(0x0003) and does not set the priority field.  There will
be other injection methods (even ones used by end users)
that will not correctly configure the socket so that
SKB fields are correctly populated.

Then ethernet header has to have to correct value for
the protocol though.

Add a check to also allow packets whose ethhdr->h_proto
matches ETH_P_LLDP (0x88CC).

Fixes: 07ad883c0de0 ("ice: Allow egress control packets from PF_VSI")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: report supported and advertised autoneg using PHY capabilities

Ethtool incorrectly reported supported and advertised auto-negotiation
settings for a backplane PHY image which did not support auto-negotiation.
This can occur when using media or PHY type for reporting ethtool
supported and advertised auto-negotiation settings.

Remove setting supported and advertised auto-negotiation settings based
on PHY type in ice_phy_type_to_ethtool(), and MAC type in
ice_get_link_ksettings().

Ethtool supported and advertised auto-negotiation settings should be
based on the PHY image using the AQ command get PHY capabilities with
media. Add setting supported and advertised auto-negotiation settings
based get PHY capabilities with media in ice_get_link_ksettings().

Fixes: 6c429a84c56e ("ice: Implement handlers for ethtool PHY/link operations")
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: handle the VF VSI rebuild failure

VSI rebuild can be failed for LAN queue config, then the VF's VSI will
be NULL, the VF reset should be stopped with the VF entering into the
disable state.

Fixes: f9827f5bc207 ("ice: Refactor VF reset")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared

Some AVF drivers expect the VF_MBX_ATQLEN register to be cleared for any
type of VFR/VFLR. Fix this by clearing the VF_MBX_ATQLEN register at the
same time as VF_MBX_ARQLEN.

Fixes: 37eff51a246f ("ice: clear VF ARQLEN register on reset")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice: Fix allowing VF to request more/less queues via virtchnl

Commit f9827f5bc207 ("ice: Refactor VF reset") caused a regression
that removes the ability for a VF to request a different amount of
queues via VIRTCHNL_OP_REQUEST_QUEUES. This prevents VF drivers to
either increase or decrease the number of queue pairs they are
allocated. Fix this by using the variable vf->num_req_qs when
determining the vf->num_vf_qs during VF VSI creation.

Fixes: f9827f5bc207 ("ice: Refactor VF reset")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

netdevsim: Fix unsigned being compared to less than zero

The comparison of len < 0 is always false because len is a size_t. Fix
this by making len a ssize_t instead.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 59a424e28362 ("netdevsim: Add max_vfs to bus_dev")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-net-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth

bluetooth pull request for net:

 - Fixes UAF and CVE-2021-3564
 - Fix VIRTIO_ID_BT to use an unassigned ID
 - Fix firmware loading on some Intel Controllers

Signed-off-by: David S. Miller <davem@davemloft.net>

icmp: fix lib conflict with trinity

Including <linux/in.h> and <netinet/in.h> in the dependencies breaks
compilation of trinity due to multiple definitions. <linux/in.h> is only
used in <linux/icmp.h> to provide the definition of the struct in_addr,
but this can be substituted out by using the datatype __be32.

Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: rmnet: Restructure if checks to avoid uninitialized warning

Clang warns that proto in rmnet_map_v5_checksum_uplink_packet() might be
used uninitialized:

drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:283:14: warning:
variable 'proto' is used uninitialized whenever 'if' condition is false
[-Wsometimes-uninitialized]
                } else if (skb->protocol == htons(ETH_P_IPV6)) {
                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:295:36: note:
uninitialized use occurs here
                check = rmnet_map_get_csum_field(proto, trans);
                                                 ^~~~~
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:283:10: note:
remove the 'if' if its condition is always true
                } else if (skb->protocol == htons(ETH_P_IPV6)) {
                       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c:270:11: note:
initialize the variable 'proto' to silence this warning
                u8 proto;
                        ^
                         = '\0'
1 warning generated.

This is technically a false positive because there is an if statement
above this one that checks skb->protocol for not being either
ETH_P_IP{,V6}. However, it is more obvious to sink that into the if
statement as an else branch, which makes the code clearer and fixes the
warning.

At the same time, move the "IS_ENABLED(CONFIG_IPV6)" into the else if
condition so that the else branch of the preprocessor conditional can
be shared, since there is no build failure with CONFIG_IPV6 disabled.

Fixes: bb71121b4162 ("net: ethernet: rmnet: Add support for MAPv5 egress packets")
Link: https://github.com/ClangBuiltLinux/linux/issues/1390
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio-net: fix for skb_over_panic inside big mode

In virtio-net's large packet mode, there is a hole in the space behind
buf.

    hdr_padded_len - hdr_len

We must take this into account when calculating tailroom.

[   44.544385] skb_put.cold (net/core/skbuff.c:5254 (discriminator 1) net/core/skbuff.c:5252 (discriminator 1))
[   44.544864] page_to_skb (drivers/net/virtio_net.c:485) [   44.545361] receive_buf (drivers/net/virtio_net.c:849 drivers/net/virtio_net.c:1131)
[   44.545870] ? netif_receive_skb_list_internal (net/core/dev.c:5714)
[   44.546628] ? dev_gro_receive (net/core/dev.c:6103)
[   44.547135] ? napi_complete_done (./include/linux/list.h:35 net/core/dev.c:5867 net/core/dev.c:5862 net/core/dev.c:6565)
[   44.547672] virtnet_poll (drivers/net/virtio_net.c:1427 drivers/net/virtio_net.c:1525)
[   44.548251] __napi_poll (net/core/dev.c:6985)
[   44.548744] net_rx_action (net/core/dev.c:7054 net/core/dev.c:7139)
[   44.549264] __do_softirq (./arch/x86/include/asm/jump_label.h:19 ./include/linux/jump_label.h:200 ./include/trace/events/irq.h:142 kernel/softirq.c:560)
[   44.549762] irq_exit_rcu (kernel/softirq.c:433 kernel/softirq.c:637 kernel/softirq.c:649)
[   44.551384] common_interrupt (arch/x86/kernel/irq.c:240 (discriminator 13))
[   44.551991] ? asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638)
[   44.552654] asm_common_interrupt (./arch/x86/include/asm/idtentry.h:638)

Fixes: 6acd284c2ed1 ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reported-by: Corentin Noël <corentin.noel@collabora.com>
Tested-by: Corentin Noël <corentin.noel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: Make ks8851_read_selftest() return void

clang points out that ret in ks8851_read_selftest() is set but unused:

drivers/net/ethernet/micrel/ks8851_common.c:1028:6: warning: variable
'ret' set but not used [-Wunused-but-set-variable]
        int ret = 0;
            ^
1 warning generated.

The return code of this function has never been checked so just remove
ret and make the function return void.

Fixes: 1c261c2a483d ("net: Micrel KS8851 SPI network driver")
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_htb: fix doc warning in htb_add_to_id_tree()

Add description for parameters of htb_add_to_id_tree() to fix
gcc W=1 warnings:
net/sched/sch_htb.c:282: warning: Function parameter or member 'root' not described in 'htb_add_to_id_tree'
net/sched/sch_htb.c:282: warning: Function parameter or member 'cl' not described in 'htb_add_to_id_tree'
net/sched/sch_htb.c:282: warning: Function parameter or member 'prio' not described in 'htb_add_to_id_tree'

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: remove redundant initialization of variable ret

The variable ret is being initialized with a value that is never read,
it is being updated later on.  The assignment is redundant and can be
removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: marvell: use phy_modify_changed() for marvell_set_polarity()

Rather than open-coding the phy_modify_changed() sequence, use this
helper in marvell_set_polarity().

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ieee802154-for-davem-2021-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
An update from ieee802154 for your *net* tree.

This time we have fixes for the ieee802154 netlink code, as well as a driver
fix. Zhen Lei, Wei Yongjun and Yang Li each had  a patch to cleanup some return
code handling ensuring we actually get a real error code when things fails.

Dan Robertson fixed a potential null dereference in our netlink handling.

Andy Shevchenko removed of_match_ptr()usage in the mrf24j40 driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions

Reported by syzbot:
HEAD commit:    899e2b6b Merge tag 'fixes' of git://git.kernel.org/pub/scm..
git tree:       git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
link: https://syzkaller.appspot.com/bug?extid=123aa35098fd3c000eb7
compiler:       Debian clang version 11.0.1-2

==================================================================
BUG: KASAN: slab-out-of-bounds in fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline]
BUG: KASAN: slab-out-of-bounds in fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732
Read of size 8 at addr ffff8880145c78f8 by task syz-executor.4/17760

CPU: 0 PID: 17760 Comm: syz-executor.4 Not tainted 5.12.0-rc8-syzkaller #0
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x202/0x31e lib/dump_stack.c:120
 print_address_description+0x5f/0x3b0 mm/kasan/report.c:232
 __kasan_report mm/kasan/report.c:399 [inline]
 kasan_report+0x15c/0x200 mm/kasan/report.c:416
 fib6_nh_get_excptn_bucket net/ipv6/route.c:1604 [inline]
 fib6_nh_flush_exceptions+0xbd/0x360 net/ipv6/route.c:1732
 fib6_nh_release+0x9a/0x430 net/ipv6/route.c:3536
 fib6_info_destroy_rcu+0xcb/0x1c0 net/ipv6/ip6_fib.c:174
 rcu_do_batch kernel/rcu/tree.c:2559 [inline]
 rcu_core+0x8f6/0x1450 kernel/rcu/tree.c:2794
 __do_softirq+0x372/0x7a6 kernel/softirq.c:345
 invoke_softirq kernel/softirq.c:221 [inline]
 __irq_exit_rcu+0x22c/0x260 kernel/softirq.c:422
 irq_exit_rcu+0x5/0x20 kernel/softirq.c:434
 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1100
 </IRQ>
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:632
RIP: 0010:lock_acquire+0x1f6/0x720 kernel/locking/lockdep.c:5515
Code: f6 84 24 a1 00 00 00 02 0f 85 8d 02 00 00 f7 c3 00 02 00 00 49 bd 00 00 00 00 00 fc ff df 74 01 fb 48 c7 44 24 40 0e 36 e0 45 <4b> c7 44 3d 00 00 00 00 00 4b c7 44 3d 09 00 00 00 00 43 c7 44 3d
RSP: 0018:ffffc90009e06560 EFLAGS: 00000206
RAX: 1ffff920013c0cc0 RBX: 0000000000000246 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90009e066e0 R08: dffffc0000000000 R09: fffffbfff1f992b1
R10: fffffbfff1f992b1 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000000 R15: 1ffff920013c0cb4
 rcu_lock_acquire+0x2a/0x30 include/linux/rcupdate.h:267
 rcu_read_lock include/linux/rcupdate.h:656 [inline]
 ext4_get_group_info+0xea/0x340 fs/ext4/ext4.h:3231
 ext4_mb_prefetch+0x123/0x5d0 fs/ext4/mballoc.c:2212
 ext4_mb_regular_allocator+0x8a5/0x28f0 fs/ext4/mballoc.c:2379
 ext4_mb_new_blocks+0xc6e/0x24f0 fs/ext4/mballoc.c:4982
 ext4_ext_map_blocks+0x2be3/0x7210 fs/ext4/extents.c:4238
 ext4_map_blocks+0xab3/0x1cb0 fs/ext4/inode.c:638
 ext4_getblk+0x187/0x6c0 fs/ext4/inode.c:848
 ext4_bread+0x2a/0x1c0 fs/ext4/inode.c:900
 ext4_append+0x1a4/0x360 fs/ext4/namei.c:67
 ext4_init_new_dir+0x337/0xa10 fs/ext4/namei.c:2768
 ext4_mkdir+0x4b8/0xc00 fs/ext4/namei.c:2814
 vfs_mkdir+0x45b/0x640 fs/namei.c:3819
 ovl_do_mkdir fs/overlayfs/overlayfs.h:161 [inline]
 ovl_mkdir_real+0x53/0x1a0 fs/overlayfs/dir.c:146
 ovl_create_real+0x280/0x490 fs/overlayfs/dir.c:193
 ovl_workdir_create+0x425/0x600 fs/overlayfs/super.c:788
 ovl_make_workdir+0xed/0x1140 fs/overlayfs/super.c:1355
 ovl_get_workdir fs/overlayfs/super.c:1492 [inline]
 ovl_fill_super+0x39ee/0x5370 fs/overlayfs/super.c:2035
 mount_nodev+0x52/0xe0 fs/super.c:1413
 legacy_get_tree+0xea/0x180 fs/fs_context.c:592
 vfs_get_tree+0x86/0x270 fs/super.c:1497
 do_new_mount fs/namespace.c:2903 [inline]
 path_mount+0x196f/0x2be0 fs/namespace.c:3233
 do_mount fs/namespace.c:3246 [inline]
 __do_sys_mount fs/namespace.c:3454 [inline]
 __se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3431
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f68f2b87188 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 000000000056bf60 RCX: 00000000004665f9
RDX: 00000000200000c0 RSI: 0000000020000000 RDI: 000000000040000a
RBP: 00000000004bfbb9 R08: 0000000020000100 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056bf60
R13: 00007ffe19002dff R14: 00007f68f2b87300 R15: 0000000000022000

Allocated by task 17768:
 kasan_save_stack mm/kasan/common.c:38 [inline]
 kasan_set_track mm/kasan/common.c:46 [inline]
 set_alloc_info mm/kasan/common.c:427 [inline]
 ____kasan_kmalloc+0xc2/0xf0 mm/kasan/common.c:506
 kasan_kmalloc include/linux/kasan.h:233 [inline]
 __kmalloc+0xb4/0x380 mm/slub.c:4055
 kmalloc include/linux/slab.h:559 [inline]
 kzalloc include/linux/slab.h:684 [inline]
 fib6_info_alloc+0x2c/0xd0 net/ipv6/ip6_fib.c:154
 ip6_route_info_create+0x55d/0x1a10 net/ipv6/route.c:3638
 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728
 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352
 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmsg+0x319/0x400 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Last potentially related work creation:
 kasan_save_stack+0x27/0x50 mm/kasan/common.c:38
 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345
 __call_rcu kernel/rcu/tree.c:3039 [inline]
 call_rcu+0x1b1/0xa30 kernel/rcu/tree.c:3114
 fib6_info_release include/net/ip6_fib.h:337 [inline]
 ip6_route_info_create+0x10c4/0x1a10 net/ipv6/route.c:3718
 ip6_route_add+0x22/0x120 net/ipv6/route.c:3728
 inet6_rtm_newroute+0x2cd/0x2260 net/ipv6/route.c:5352
 rtnetlink_rcv_msg+0xb34/0xe70 net/core/rtnetlink.c:5553
 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2502
 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
 netlink_unicast+0x7de/0x9b0 net/netlink/af_netlink.c:1338
 netlink_sendmsg+0xaa6/0xe90 net/netlink/af_netlink.c:1927
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x5a2/0x900 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmsg+0x319/0x400 net/socket.c:2433
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Second to last potentially related work creation:
 kasan_save_stack+0x27/0x50 mm/kasan/common.c:38
 kasan_record_aux_stack+0xee/0x120 mm/kasan/generic.c:345
 insert_work+0x54/0x400 kernel/workqueue.c:1331
 __queue_work+0x981/0xcc0 kernel/workqueue.c:1497
 queue_work_on+0x111/0x200 kernel/workqueue.c:1524
 queue_work include/linux/workqueue.h:507 [inline]
 call_usermodehelper_exec+0x283/0x470 kernel/umh.c:433
 kobject_uevent_env+0x1349/0x1730 lib/kobject_uevent.c:617
 kvm_uevent_notify_change+0x309/0x3b0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4809
 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:877 [inline]
 kvm_put_kvm+0x9c/0xd10 arch/x86/kvm/../../../virt/kvm/kvm_main.c:920
 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3120
 __fput+0x352/0x7b0 fs/file_table.c:280
 task_work_run+0x146/0x1c0 kernel/task_work.c:140
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:174 [inline]
 exit_to_user_mode_prepare+0x10b/0x1e0 kernel/entry/common.c:208
 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline]
 syscall_exit_to_user_mode+0x26/0x70 kernel/entry/common.c:301
 entry_SYSCALL_64_after_hwframe+0x44/0xae

The buggy address belongs to the object at ffff8880145c7800
 which belongs to the cache kmalloc-192 of size 192
The buggy address is located 56 bytes to the right of
 192-byte region [ffff8880145c7800, ffff8880145c78c0)
The buggy address belongs to the page:
page:ffffea00005171c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x145c7
flags: 0xfff00000000200(slab)
raw: 00fff00000000200 ffffea00006474c0 0000000200000002 ffff888010c41a00
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880145c7780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8880145c7800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880145c7880: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
                                                                ^
 ffff8880145c7900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880145c7980: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================

In the ip6_route_info_create function, in the case that the nh pointer
is not NULL, the fib6_nh in fib6_info has not been allocated.
Therefore, when trying to free fib6_info in this error case using
fib6_info_release, the function will call fib6_info_destroy_rcu,
which it will access fib6_nh_release(f6i->fib6_nh);
However, f6i->fib6_nh doesn't have any refcount yet given the lack of allocation
causing the reported memory issue above.
Therefore, releasing the empty pointer directly instead would be the solution.

Fixes: b6b1bd779ad28 ("ipv6: Plumb support for nexthop object in a fib6_info")
Fixes: bbe296d0bc01b ("ipv6: Fix nexthop refcnt leak when creating ipv6 route info")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>