Gerd Hoffmann [Fri, 7 Feb 2020 07:46:38 +0000 (08:46 +0100)]
drm/virtio: move virtio_gpu_mem_entry initialization to new function
Introduce new virtio_gpu_object_shmem_init() helper function which will
create the virtio_gpu_mem_entry array, containing the backing storage
information for the host. For the most path this just moves code from
virtio_gpu_object_attach().
Gerd Hoffmann [Fri, 7 Feb 2020 07:46:37 +0000 (08:46 +0100)]
drm/virtio: move mapping teardown to virtio_gpu_cleanup_object()
Stop sending DETACH_BACKING commands, that will happening anyway when
releasing resources via UNREF. Handle guest-side cleanup in
virtio_gpu_cleanup_object(), called when the host finished processing
the UNREF command.
Gerd Hoffmann [Fri, 7 Feb 2020 07:46:36 +0000 (08:46 +0100)]
drm/virtio: resource teardown tweaks
Add new virtio_gpu_cleanup_object() helper function for object cleanup.
Wire up callback function for resource unref, do cleanup from callback
when we know the host stopped using the resource.
Jyri Sarha [Fri, 29 Nov 2019 15:23:42 +0000 (17:23 +0200)]
drm/bridge: sii902x: Select SND_SOC_HDMI_CODEC if SND_SOC is configured
To enable HDMI audio the SND_SOC_HDMI_CODEC needs to be
configured. Enable HDMI audio by selecting SND_SOC_HDMI_CODEC if
SND_SOC is configured. SND_SOC_HDMI_CODEC has no config menu entry and
should be selected automatically by the drivers using it.
Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[narmstrong: atomatically -> automatically] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191129152342.29145-1-jsarha@ti.com
Peter Ujfalusi [Fri, 31 Jan 2020 11:15:53 +0000 (13:15 +0200)]
drm/bridge: Add tc358768 driver
Add basic support for the Toshiba TC358768 RGB to DSI bridge.
Not all the features of the TC358768 is implemented by the initial driver:
MIPI_DSI_MODE_VIDEO and MIPI_DSI_FMT_RGB888 is only supported and tested.
Only write is implemented for mipi_dsi_host_ops.transfer.
Atomic modesetting doesn't use struct drm_connector_funcs.dpms and
the set function, drm_helper_connector_dpms(), wouldn't support it
anyway. So keep the pointer to NULL.
Atomic modesetting doesn't use struct drm_connector_funcs.dpms and
the set function, drm_helper_connector_dpms(), wouldn't support it
anyway. So keep the pointer to NULL.
drm/tiny: add support for tft displays based on ilitek,ili9486
This adds support fot ilitek,ili9486 based displays with shift register
in front of controller.
Ozzmaker,Piscreen and Waveshare,rpi-lcd-35 are such displays.
Sam Ravnborg [Thu, 6 Feb 2020 13:33:42 +0000 (14:33 +0100)]
dt-bindings: one file of all simple DSI panels
To complement panel-simple.yaml, create panel-simple-dsi.yaml.
panel-simple-dsi-yaml are for all simple DSP panels with a single
power-supply and optional backlight / enable GPIO.
Migrate panasonic,vvx10f034n00 over to the new file.
The objectives with one file for all the simple DSI panels are:
- Make it simpler to add bindings for simple DSI panels
- Keep the number of bindings file lower
- Keep the binding documentation for simple DSI panels more consistent
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Herring <robh@kernel.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: devicetree@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200206133344.724-2-benjamin.gaignard@st.com
Gerd Hoffmann [Fri, 7 Feb 2020 06:46:53 +0000 (07:46 +0100)]
drm/virtio: fix ring free check
If the virtio device supports indirect ring descriptors we need only one
ring entry for the whole command. Take that into account when checking
whenever the virtqueue has enough free entries for our command.
Chia-I Wu [Wed, 5 Feb 2020 18:19:54 +0000 (10:19 -0800)]
drm/virtio: move virtqueue_notify into virtio_gpu_queue_ctrl_sgs
It becomes clear that virtio_gpu_queue_fenced_ctrl_buffer should be
responsible for setting up sgs and virtio_gpu_queue_ctrl_sgs should
be responsible for queuing sgs.
Chia-I Wu [Wed, 5 Feb 2020 18:19:52 +0000 (10:19 -0800)]
drm/virtio: move the check for vqs_ready earlier
When vqs_ready is false, vq should be considered invalid and we
should not check vq->num_free. After this change, a fenced command
queued before the vqs are ready will have fence id 0 and will be
considered done.
Chia-I Wu [Wed, 5 Feb 2020 18:19:46 +0000 (10:19 -0800)]
drm/virtio: remove incorrect ENOSPC check
The handling of virtqueue_add_sgs ENOSPC error is incorrect because
it can result in out-of-order virtqueue_add_sgs and break fences.
We never get ENOSPC anyway because the caller waits until there is
enough space (the other caller that did not wait was removed in
commit f9c849e4e096 ("drm/virtio: Rewrite virtio_gpu_queue_ctrl_buffer
using fenced version.")). Remove the incorrect and unnecessary error
path.
This also adds a WARN_ON(ret) until we properly handle errors.
The implementation of struct drm_mode_config_funcs.mode_valid verifies
that enough video memory is available for a given display mode. This
replaces similar functionality in bochs_connector_mode_valid().
v2:
* remove bochs_connector_mode_valid(), which now serves no purpose
drm/vram: Add helpers to validate a display mode's memory requirements
Devices with low amount of dedicated video memory may not be able
to use all possible display modes, as the framebuffers may not fit
into VRAM. The new helper function drm_vram_helper_mode_valid()
implements a simple test to sort out all display modes that can
not be used in any case. Drivers should call this function from
struct drm_mode_config_funcs.mode_valid.
The functionality was originally implemented by the ast driver, which
is being converted as well.
v2:
* WARN_ON if VRAM memory manager has not been initialized
* documentation fixes
* unexported drm_vram_helper_mode_valid_internal()
Chris Wilson [Sun, 2 Feb 2020 17:16:32 +0000 (17:16 +0000)]
drm: Remove the dma_alloc_coherent wrapper for internal usage
Internally for "consistent" maps, we create a temporary struct
drm_dma_handle in order to use our own dma_alloc_coherent wrapper then
destroy the temporary wrap. Simplify our logic by removing the temporary
wrapper!
Chris Wilson [Sun, 2 Feb 2020 17:16:31 +0000 (17:16 +0000)]
drm: Remove PageReserved manipulation from drm_pci_alloc
drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma
facilities, and we have no special reason within the drm layer to behave
differently. In particular, since
Yannick Fertre [Tue, 21 Jan 2020 10:14:10 +0000 (11:14 +0100)]
drm/stm: ltdc: check crtc state before enabling LIE
Following investigations of a hardware bug, the LIE interrupt
can occur while the display controller is not activated.
LIE interrupt (vblank) don't have to be set if the CRTC is not
enabled.
Boris Brezillon [Tue, 28 Jan 2020 13:55:09 +0000 (14:55 +0100)]
drm/imx: pd: Use bus format/flags provided by the bridge when available
Now that bridges can expose the bus format/flags they expect, we can
use those instead of the relying on the display_info provided by the
connector (which is only valid if the encoder is directly connected
to bridge element driving the panel/display).
We also explicitly expose the bus formats supported by our encoder by
filling encoder->output_bus_caps with proper info.
v10:
* Add changelog to the commit message
* Use kmalloc() instead of kcalloc()
* Add a dev_warn() when unsupported flags are requested
v8 -> v9:
* No changes
v7:
* Add an imx_pd_format_supported() helper (suggested by Philipp)
* Simplify imx_pd_bridge_atomic_get_output_bus_fmts() (suggested by Philipp)
* Simplify imx_pd_bridge_atomic_get_input_bus_fmts()
* Explicitly set the duplicate/destro_state() and reset() hooks
v4 -> v6:
* Patch was not part of the series
v3 (all suggested by Philipp):
* Adjust to match core changes
* Propagate output format to input format
* Pick a default value when output_fmt = _FIXED
* Add missing BGR888 and GBR888 fmts to imx_pd_bus_fmts[]
v2:
* Adjust things to match the new bus-format negotiation infra
Boris Brezillon [Tue, 28 Jan 2020 13:55:08 +0000 (14:55 +0100)]
drm/bridge: Add the necessary bits to support bus format negotiation
drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.
The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.
Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).
Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).
v10:
* Add changelog to the commit message
v9:
* No changes
v8:
* Fix a test in drm_atomic_bridge_chain_select_bus_fmts() (Reported by
Jonas)
v7:
* Adapt the code to deal with the fact that not all bridges in the
chain have a bridge state
v5 -> v6:
* No changes
v4:
* Enhance the doc
* Fix typos
* Rename some parameters/fields
* Reword the commit message
v3:
* Fix the commit message (Reported by Laurent)
* Document the fact that bus formats should not be directly modified by
drivers (Suggested by Laurent)
* Document the fact that format order matters (Suggested by Laurent)
* Propagate bus flags by default
* Document the fact that drivers can tweak bus flags if needed
* Let ->atomic_get_{output,input}_bus_fmts() allocate the bus format
array (Suggested by Laurent)
* Add a drm_atomic_helper_bridge_propagate_bus_fmt()
* Mandate that bridge drivers return accurate input_fmts even if they
are known to be the first element in the bridge chain
v2:
* Rework things to support more complex use cases
Boris Brezillon [Tue, 28 Jan 2020 13:55:07 +0000 (14:55 +0100)]
drm/bridge: Add an ->atomic_check() hook
So that bridge drivers have a way to check/reject an atomic operation.
The drm_atomic_bridge_chain_check() (which is just a wrapper around
the ->atomic_check() hook) is called in place of
drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented,
the core falls back on ->mode_fixup(), so the behavior should stay
the same for existing bridge drivers).
v10:
* Add changelog to the commit message
v8 -> v9:
* No changes
v7:
* Fix a NULL pointer dereference
v5 -> v6:
* No changes
v4:
* Add R-bs
v3:
* No changes
v2:
* Clarify the fact that ->atomic_check() is replacing ->mode_fixup()
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-6-boris.brezillon@collabora.com
v3:
* Old state clarification moved to a separate patch
v2:
* Pass the old bridge state
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable]
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net> Tested-by: Jonas Karlman <jonas@kwiboo.se> Link: https://patchwork.freedesktop.org/patch/msgid/20200128135514.108171-5-boris.brezillon@collabora.com
Boris Brezillon [Tue, 28 Jan 2020 13:55:03 +0000 (14:55 +0100)]
drm/bridge: Add a drm_bridge_state object
One of the last remaining objects to not have its atomic state.
This is being motivated by our attempt to support runtime bus-format
negotiation between elements of the bridge chain.
This patch just paves the road for such a feature by adding a new
drm_bridge_state object inheriting from drm_private_obj so we can
re-use some of the existing state initialization/tracking logic.
v10:
* Add changelog to the commit message
v9:
* Clarify the fact that the bridge->atomic_reset() and
{connector,plane,crtc,...}->reset() semantics are different
* Move the drm_atomic_private_obj_init() call back to
drm_bridge_attach()
* Check the presence of ->atomic_duplicate_state instead of
->atomic_reset in drm_atomic_add_encoder_bridges()
* Fix copy&paste errors in the atomic bridge state helpers doc
* Add A-b/R-b tags
v8:
* Move bridge state helpers out of the CONFIG_DEBUGFS section
v7:
* Move helpers, struct-defs, ... to atomic helper files to avoid the
drm -> drm_kms_helper -> drm circular dep
* Stop providing default implementation for atomic state reset,
duplicate and destroy hooks (has to do with the helper/core split)
* Drop all R-b/T-b as helpers have now be moved to other places
v6:
* Made helpers private, removed doc and moved them to satisfy dependencies
* Renamed helpers to _default_
v5:
* Re-introduced the helpers from v4
v4:
* Fix the doc
* Kill default helpers (inlined)
* Fix drm_atomic_get_bridge_state() to check for an ERR_PTR()
* Add Neil's R-b
v3:
* No changes
v2:
* Use drm_for_each_bridge_in_chain()
* Rename helpers to be more consistent with the rest of the DRM API
* Improve/fix the doc
drm/xen: Explicitly disable automatic sending of vblank event
The atomic helpers automatically send out fake VBLANK events if no
vblanking has been initialized. This would apply to xen, but xen has
its own vblank logic. To avoid interfering with the atomic helpers,
disable automatic vblank events explicitly.
v5:
* update comment
v4:
* separate commit from core vblank changes
drm/udl: Don't set struct drm_crtc_state.no_vblank explicitly
As udl does not initialize vblanking, atomic helpers initialize the
value of struct drm_crtc_state.no_vblank to be true. No need to set
it from within the driver.
drm/ast: Don't set struct drm_crtc_state.no_vblank explicitly
As ast does not initialize vblanking, atomic helpers initialize the
value of struct drm_crtc_state.no_vblank to be true. No need to set
it from within the driver.
drm: Initialize struct drm_crtc_state.no_vblank from device settings
At the end of a commit, atomic helpers can generate a fake VBLANK event
automatically. Originally implemented for writeback connectors, the
functionality can be used by any driver and/or hardware without proper
VBLANK interrupt.
The patch updates the documentation to make this behaviour official:
settings struct drm_crtc_state.no_vblank to true enables automatic
generation of fake VBLANK events.
The new interface drm_dev_has_vblank() returns true if vblanking has
been initialized for a device, or false otherwise. Atomic helpers use
this function when initializing no_vblank in the CRTC state in
drm_atomic_helper_check_modeset(). If vblanking has been initialized
for a device, no_blank is disabled. Otherwise it's enabled. Hence,
atomic helpers will automatically send out fake VBLANK events with any
driver that did not initialize vblanking.
v5:
* more precise documentation and commit message
v4:
* replace drm_crtc_has_vblank() with drm_dev_has_vblank()
* add drm_dev_has_vblank() in this patch
* move driver changes into separate patches
v3:
* squash all related changes patches into this patch
Daniel Vetter [Mon, 27 Jan 2020 10:02:03 +0000 (11:02 +0100)]
drm/auth: Drop master_create/destroy hooks
vmwgfx stopped using them.
With the drm device model that we've slowly evolved over the past few
years master status essentially controls access to display resources,
and nothing else. Since that's a pure access permission check drivers
should have no need at all to track additional state on a per file
basis.
Aside: For cleanup and restoring kernel-internal clients the grand
plan is to move everyone over to drm_client and
drm_master_internal_acquire/release, like the generic fbdev code
already does. That should get rid of most ->lastclose implementations,
and I think also subsumes any processing vmwgfx does in
master_set/drop.
Daniel Vetter [Fri, 13 Dec 2019 17:26:03 +0000 (18:26 +0100)]
drm/todo: Add item for the plane->atomic_check confusion
It's frankly a mess, and the confusion around plane_state->crtc/fb
that I fixed up in this series is the least of the problems. Add a
todo as a future note of how this could be done a lot better, and with
a lot less driver confusion.
Jyri Sarha [Fri, 8 Nov 2019 07:45:28 +0000 (09:45 +0200)]
drm/tidss: New driver for TI Keystone platform Display SubSystem
This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.
DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.
Version history:
v2: - rebased on top of drm-next-2019-11-27
- sort all include lines in all files
- remove all include <drm/drmP.h>
- remove select "select VIDEOMODE_HELPERS"
- call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
to call it in new modeset case as it is also called in vp_enable())
- change probe sequence and drm_device allocation (follow example in
drm_drv.c)
- use __maybe_unused instead of #ifdef for pm functions
- remove "struct drm_fbdev_cma *fbdev;" from driver data
- check panel connector type before connecting it
v3: no change
v4: no change
v5: - remove fifo underflow irq handling, it is not an error and
it should be used for debug purposes only
- memory tuning, prefetch plane fifo up to high-threshold value to
minimize possibility of underflows.
v6: - Check CTM and gamma support from dispc_features when creating crtc
- Implement CTM support for k2g and fix k3 CTM implementation
- Remove gamma property persistence and always write color properties
in a new modeset
v7: - Fix checkpatch.pl --strict issues
- Rebase on top of drm-misc-next-2020-01-10
v8: - Remove idle debug prints from dispc_init()
- Add Reviewed-by: Benoit Parrot <bparrot@ti.com>
v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
conflict exported omapfb function with same name
- Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Qiang Yu [Thu, 16 Jan 2020 13:11:55 +0000 (21:11 +0800)]
drm/lima: support heap buffer creation
heap buffer is used as output of GP and input of PP for
Mali Utgard GPU. Size of heap buffer depends on the task
so is a runtime variable.
Previously we just create a large enough buffer as heap
buffer. Now we add a heap buffer type to be able to
increase the backup memory dynamically when GP fail due
to lack of heap memory.
Jani Nikula [Thu, 23 Jan 2020 12:48:01 +0000 (14:48 +0200)]
drm/debugfs: also take per device driver features into account
Use drm_core_check_all_features() to ensure both the driver features and
the per-device driver features are taken into account when registering
debugfs files.
v3:
- files[i].driver_features == 0 actually means "don't care"
Chris Wilson [Fri, 24 Jan 2020 13:01:07 +0000 (13:01 +0000)]
drm: Avoid drm_global_mutex for simple inc/dec of dev->open_count
Since drm_global_mutex is a true global mutex across devices, we don't
want to acquire it unless absolutely necessary. For maintaining the
device local open_count, we can use atomic operations on the counter
itself, except when making the transition to/from 0. Here, we tackle the
easy portion of delaying acquiring the drm_global_mutex for the final
release by using atomic_dec_and_mutex_lock(), leaving the global
serialisation across the device opens.
Chris Wilson [Fri, 24 Jan 2020 12:56:26 +0000 (12:56 +0000)]
drm: Release filp before global lock
The file is not part of the global drm resource and can be released
prior to take the global mutex to drop the open_count (and potentially
close) the drm device. As the global mutex is indeed global, not only
within the device but across devices, a slow file release mechanism can
bottleneck the entire system.
However, inside drm_close_helper() there are a number of dev->driver
callbacks that take the drm_device as the first parameter... Worryingly
some of those callbacks may be (implicitly) depending on the global
mutex.
v2: Drop the debug message for the open-count, it's included with the
drm_file_free() debug message -- and for good measure make that up as
reading outside of the mutex.
v3: Separate the calling of the filp cleanup outside of
drm_global_mutex into a new drm_release_noglobal() hook, so that we can
phase the transition. drm/savage relies on the global mutex, and there
may be more, so be cautious.
Marcel Ziswiler [Mon, 20 Jan 2020 08:01:00 +0000 (09:01 +0100)]
drm/panel: simple: add display timings for logic technologies displays
Add display timings for the following 3 display panels manufactured by
Logic Technologies Limited:
- LT161010-2NHC e.g. as found in the Toradex Capacitive Touch Display
7" Parallel [1]
- LT161010-2NHR e.g. as found in the Toradex Resistive Touch Display 7"
Parallel [2]
- LT170410-2WHC e.g. as found in the Toradex Capacitive Touch Display
10.1" LVDS [3]
Those panels may also be distributed by Endrich Bauelemente Vertriebs
GmbH [4].
Marcel Ziswiler [Mon, 20 Jan 2020 08:00:59 +0000 (09:00 +0100)]
dt-bindings: panel-simple: add bindings for logic technologies displays
Add bindings for the following 3 to be added display panels manufactured
by Logic Technologies Limited:
- LT161010-2NHC e.g. as found in the Toradex Capacitive Touch Display
7" Parallel [1]
- LT161010-2NHR e.g. as found in the Toradex Resistive Touch Display 7"
Parallel [2]
- LT170410-2WHC e.g. as found in the Toradex Capacitive Touch Display
10.1" LVDS [3]
Those panels may also be distributed by Endrich Bauelemente Vertriebs
GmbH [4].
Marcel Ziswiler [Mon, 20 Jan 2020 08:00:58 +0000 (09:00 +0100)]
dt-bindings: add vendor prefix for logic technologies limited
Add vendor prefix for Logic Technologies Limited [1] which is a Chinese
display manufacturer e.g. distributed by German Endrich Bauelemente
Vertriebs GmbH [2].
projects / kernel.git / log