====================
net: ipv4/ipv6: new option to accept garp/untracked na only if in-network
The first patch adds an option to learn a neighbor from garp only if
the source ip is in the same subnet as an address configured on the
interface that received the garp message. The option has been added
to arp_accept in ipv4.
The same feature has been added to ndisc (patch 2). For ipv6, the
subnet filtering knob is an extension of the accept_untracked_na
option introduced in these patches:
https://lore.kernel.org/all/642672cb-8b11-c78f-8975-f287ece9e89e@gmail.com/t/
https://lore.kernel.org/netdev/20220530101414.65439-1-aajith@arista.com/T/
The third patch contains selftests for testing the different options
for accepting arp and neighbor advertisements.
====================
Jaehee Park [Wed, 13 Jul 2022 23:40:49 +0000 (16:40 -0700)]
selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na
ipv4 arp_accept has a new option '2' to create new neighbor entries
only if the src ip is in the same subnet as an address configured on
the interface that received the garp message. This selftest tests all
options in arp_accept.
ipv6 has a sysctl endpoint, accept_untracked_na, that defines the
behavior for accepting untracked neighbor advertisements. A new option
similar to that of arp_accept for learning only from the same subnet is
added to accept_untracked_na. This selftest tests this new feature.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com> Suggested-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jaehee Park [Wed, 13 Jul 2022 23:40:48 +0000 (16:40 -0700)]
net: ipv6: new accept_untracked_na option to accept na only if in-network
This patch adds a third knob, '2', which extends the
accept_untracked_na option to learn a neighbor only if the src ip is
in the same subnet as an address configured on the interface that
received the neighbor advertisement. This is similar to the arp_accept
configuration for ipv4.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com> Suggested-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jaehee Park [Wed, 13 Jul 2022 23:40:47 +0000 (16:40 -0700)]
net: ipv4: new arp_accept option to accept garp only if in-network
In many deployments, we want the option to not learn a neighbor from
garp if the src ip is not in the same subnet as an address configured
on the interface that received the garp message. net.ipv4.arp_accept
sysctl is currently used to control creation of a neigh from a
received garp packet. This patch adds a new option '2' to
net.ipv4.arp_accept which extends option '1' by including the subnet
check.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com> Suggested-by: Roopa Prabhu <roopa@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
octeontx2-af: Set NIX link credits based on max LMAC
When number of LMACs active on a CGX/RPM are 3, then
current NIX link credit config based on per lmac fifo
length which inturn is calculated as
'lmac_fifo_len = total_fifo_len / 3', is incorrect. In HW
one of the LMAC gets half of the FIFO and rest gets 1/4th.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Geetha Sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Move qca8k driver to qca dir in preparation for code split and
introduction of ipq4019 switch based on qca8k.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 15 Jul 2022 05:11:37 +0000 (22:11 -0700)]
Merge tag 'mlx5-updates-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-07-13
1) Support 802.1ad for bridge offloads
Vlad Buslov Says:
=================
Current mlx5 bridge VLAN offload implementation only supports 802.1Q VLAN
Ethernet protocol. That protocol type is assumed by default and
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification is ignored.
In order to support dynamically setting VLAN protocol handle
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification by flushing FDB and
re-creating VLAN modify header actions with a new protocol. Implement support
for 802.1ad protocol by saving the current VLAN protocol to per-bridge variable
and re-create the necessary flow groups according to its current value (either
use cvlan or svlan flow fields).
==================
2) debugfs to count ongoing FW commands
3) debugfs to query eswitch vport firmware diagnostic counters
4) Add missing meter configuration in flow action
5) Some misc cleanup
* tag 'mlx5-updates-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Remove the duplicating check for striding RQ when enabling LRO
net/mlx5e: Move the LRO-XSK check to mlx5e_fix_features
net/mlx5e: Extend flower police validation
net/mlx5e: configure meter in flow action
net/mlx5e: Removed useless code in function
net/mlx5: Bridge, implement QinQ support
net/mlx5: Bridge, implement infrastructure for VLAN protocol change
net/mlx5: Bridge, extract VLAN push/pop actions creation
net/mlx5: Bridge, rename filter fg to vlan_filter
net/mlx5: Bridge, refactor groups sizes and indices
net/mlx5: debugfs, Add num of in-use FW command interface slots
net/mlx5: Expose vnic diagnostic counters for eswitch managed vports
net/mlx5: Use software VHCA id when it's supported
net/mlx5: Introduce ifc bits for using software vhca id
net/mlx5: Use the bitmap API to allocate bitmaps
====================
include/net/sock.h 6ccc8b7ee602 ("net: Fix data-races around sysctl_mem.") 76b50b3a78d6 ("Revert "net: set SK_MEM_QUANTUM to 4096"")
https://lore.kernel.org/all/20220711120211.7c8b7cba@canb.auug.org.au/
Merge tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to f588aa3f3718 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
Merge tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three smb3 client fixes:
- two multichannel fixes: fix a potential deadlock freeing a channel,
and fix a race condition on failed creation of a new channel
- mount failure fix: work around a server bug in some common older
Samba servers by avoiding padding at the end of the negotiate
protocol request"
* tag '5.19-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: workaround negprot bug in some Samba servers
cifs: remove unnecessary locking of chan_lock while freeing session
cifs: fix race condition with delayed threads
Merge tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Notable regression fixes:
- Enable SETATTR(time_create) to fix regression with Mac OS clients
- Fix a lockd crasher and broken NLM UNLCK behavior"
* tag 'nfsd-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
lockd: fix nlm_close_files
lockd: set fl_owner when unlocking files
NFSD: Decode NFSv4 birth time attribute
Merge tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Here are a number of fixes for recently found bugs.
Only 'ima: fix violation measurement list record' was introduced in
the current release. The rest address existing bugs"
* tag 'integrity-v5.19-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Fix potential memory leak in ima_init_crypto()
ima: force signature verification when CONFIG_KEXEC_SIG is configured
ima: Fix a potential integer overflow in ima_appraise_measurement
ima: fix violation measurement list record
Revert "evm: Fix memleak in init_desc"
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- quieten the spectre-bhb prints
- mark flattened device tree sections as shareable
- remove some obsolete CPU domain code and help text
- fix thumb unaligned access abort emulation
- fix amba_device_add() refcount underflow
- fix literal placement
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9208/1: entry: add .ltorg directive to keep literals in range
ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails
ARM: 9214/1: alignment: advance IT state after emulating Thumb instruction
ARM: 9213/1: Print message about disabled Spectre workarounds only once
ARM: 9212/1: domain: Modify Kconfig help text
ARM: 9211/1: domain: drop modify_domain()
ARM: 9210/1: Mark the FDT_FIXED sections as shareable
ARM: 9209/1: Spectre-BHB: avoid pr_info() every time a CPU comes out of idle
um: Replace to_phys() and to_virt() with less generic function names
The UML function names to_virt() and to_phys() are exposed by UML
headers, and are very generic and may be defined by drivers. As it
turns out, commit 52dffcc0903f ("pmem: refactor pmem_clear_poison()")
did exactly that.
This results in build errors such as the following when trying to build
um:allmodconfig:
drivers/nvdimm/pmem.c: In function ‘pmem_dax_zero_page_range’:
./arch/um/include/asm/page.h:105:20: error: too few arguments to function ‘to_phys’
105 | #define __pa(virt) to_phys((void *) (unsigned long) (virt))
| ^~~~~~~
Use less generic function names for the um specific to_phys() and
to_virt() functions to fix the problem and to avoid similar problems in
the future.
Fixes: 52dffcc0903f ("pmem: refactor pmem_clear_poison()") Cc: Dan Williams <dan.j.williams@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last one for 5.19. This became bigger than wished, but
all changes are pretty device-specific small fixes, which look less
worrisome.
The majority of changes are about various ASoC fixes, while the usual
HD-audio quirks are included as well"
* tag 'sound-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc221
ALSA: hda/realtek: fix mute/micmute LEDs for HP machines
ALSA: hda/realtek - Fix headset mic problem for a HP machine with alc671
ALSA: hda - Add fixup for Dell Latitidue E5430
ALSA: hda/conexant: Apply quirk for another HP ProDesk 600 G3 model
ALSA: hda/realtek: Fix headset mic for Acer SF313-51
ASoC: Intel: Skylake: Correct the handling of fmt_config flexible array
ASoC: Intel: Skylake: Correct the ssp rate discovery in skl_get_ssp_clks()
ASoC: rt5640: Fix the wrong state of JD1 and JD2
ASoC: Intel: sof_rt5682: fix out-of-bounds array access
ASoC: qdsp6: fix potential memory leak in q6apm_get_audioreach_graph()
ASoC: tas2764: Fix amp gain register offset & default
ASoC: tas2764: Correct playback volume range
ASoC: tas2764: Fix and extend FSYNC polarity handling
ASoC: tas2764: Add post reset delays
ASoC: dt-bindings: Fix description for msm8916
ASoC: doc: Capitalize RESET line name
ASoC: arizona: Update arizona_aif_cfg_changed to use RX_BCLK_RATE
ASoC: cs47l92: Fix event generation for OUT1 demux
...
nfp: flower: configure tunnel neighbour on cmsg rx
nfp_tun_write_neigh() function will configure a tunnel neighbour when
calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx()
(with no tunnel neighbour type) from firmware.
When configuring IP on physical port as a tunnel endpoint, no operation
will be performed after receiving the cmsg mentioned above.
Therefore, add a progress to configure tunnel neighbour in this case.
v2: Correct format of fixes tag.
Fixes: 5b89efd39f95 ("nfp: flower: rework tunnel neighbour configuration") Signed-off-by: Tianyu Yuan <tianyu.yuan@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220714081915.148378-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
xenvif_rx_next_skb() is expecting the rx queue not being empty, but
in case the loop in xenvif_rx_action() is doing multiple iterations,
the availability of another skb in the rx queue is not being checked.
amdgpu: disable powerpc support for the newer display engine
The DRM_AMD_DC_DCN display engine support (Raven, Navi, and newer) has
not been building cleanly on powerpc and causes link errors due to
mixing hard- and soft-float object files:
powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float
powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o
[..]
and while patches are floating around, it's not exactly obvious what is
going on.
The problem bisects to commit face7150f53c ("powerpc: Book3S 64-bit
outline-only KASAN support") but that is probably more about changing
config variables than the fundamental cause.
Despite the bisection result, a more directly related commit seems to be 478148593acc ("drm/amd/display: move FPU related code from dcn31 to
dml/dcn31 folder"). It's probably a combination of the two.
This has been going on since the merge window, without any final word.
So instead of blindly applying patches that may or may not be the right
thing, let's disable this for now.
As Michael Ellerman says:
"IIUIC this code was never enabled on ppc before, so disabling it seems
like a reasonable fix to get the build clean"
and once we have more actual feedback (and find any potential users) we
can always re-enable it with the patch that fixes the issues and
back-port as necessary.
Nicolas Dichtel [Wed, 13 Jul 2022 11:48:53 +0000 (13:48 +0200)]
selftests/net: test nexthop without gw
This test implement the scenario described in the commit
"ip: fix dflt addr selection for connected nexthop".
The test configures a nexthop object with an output device only (no gateway
address) and a route that uses this nexthop. The goal is to check if the
kernel selects a valid source address.
Nicolas Dichtel [Wed, 13 Jul 2022 11:48:52 +0000 (13:48 +0200)]
ip: fix dflt addr selection for connected nexthop
When a nexthop is added, without a gw address, the default scope was set
to 'host'. Thus, when a source address is selected, 127.0.0.1 may be chosen
but rejected when the route is used.
When using a route without a nexthop id, the scope can be configured in the
route, thus the problem doesn't exist.
To explain more deeply: when a user creates a nexthop, it cannot specify
the scope. To create it, the function nh_create_ipv4() calls fib_check_nh()
with scope set to 0. fib_check_nh() calls fib_check_nh_nongw() wich was
setting scope to 'host'. Then, nh_create_ipv4() calls
fib_info_update_nhc_saddr() with scope set to 'host'. The src addr is
chosen before the route is inserted.
When a 'standard' route (ie without a reference to a nexthop) is added,
fib_create_info() calls fib_info_update_nhc_saddr() with the scope set by
the user. iproute2 set the scope to 'link' by default.
Here is a way to reproduce the problem:
ip netns add foo
ip -n foo link set lo up
ip netns add bar
ip -n bar link set lo up
sleep 1
ip -n foo link add name eth0 type dummy
ip -n foo link set eth0 up
ip -n foo address add 192.168.0.1/24 dev eth0
ip -n foo link add name veth0 type veth peer name veth1 netns bar
ip -n foo link set veth0 up
ip -n bar link set veth1 up
ip -n bar address add 192.168.1.1/32 dev veth1
ip -n bar route add default dev veth1
ip -n foo nexthop add id 1 dev veth0
ip -n foo route add 192.168.1.1 nhid 1
Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> RTNETLINK answers: Invalid argument
> $ ip netns exec foo ping -c1 192.168.1.1
> ping: connect: Invalid argument
Try without nexthop group (iproute2 sets scope to 'link' by dflt):
ip -n foo route del 192.168.1.1
ip -n foo route add 192.168.1.1 dev veth0
Try to get/use the route:
> $ ip -n foo route get 192.168.1.1
> 192.168.1.1 dev veth0 src 192.168.0.1 uid 0
> cache
> $ ip netns exec foo ping -c1 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.039 ms
>
> --- 192.168.1.1 ping statistics ---
> 1 packets transmitted, 1 received, 0% packet loss, time 0ms
> rtt min/avg/max/mdev = 0.039/0.039/0.039/0.000 ms
CC: stable@vger.kernel.org Fixes: 0b2837f003c1 ("nexthop: Add support for IPv4 nexthops") Reported-by: Edwin Brossette <edwin.brossette@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220713114853.29406-1-nicolas.dichtel@6wind.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ard Biesheuvel [Tue, 31 May 2022 08:49:24 +0000 (09:49 +0100)]
ARM: 9208/1: entry: add .ltorg directive to keep literals in range
LKP reports a build issue on Clang, related to a literal load of
__current issued through the ldr_va macro. This turns out to be due to
the fact that group relocations are disabled when CONFIG_COMPILE_TEST=y,
which means that the ldr_va macro resolves to a pair of LDR
instructions, the first one being a literal load issued too far from its
literal pool.
Due to the introduction of a couple of new uses of this macro in commit 6468297033cf769e ("ARM: 9195/1: entry: avoid explicit literal loads"),
the literal pools end up getting rearranged in a way that causes the
literal for __current to go out of range. Let's fix this up by putting a
.ltorg directive in a suitable place in the code.
Link: https://lore.kernel.org/all/202205290805.1vZLAr36-lkp@intel.com/ Fixes: 6468297033cf769e ("ARM: 9195/1: entry: avoid explicit literal loads") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Wang Kefeng [Tue, 24 May 2022 08:03:46 +0000 (09:03 +0100)]
ARM: 9207/1: amba: fix refcount underflow if amba_device_add() fails
"ARM: 9192/1: amba: fix memory leak in amba_device_try_add()" leads
to a refcount underflow if amba_device_add() fails, which called by
of_amba_device_create(), the of_amba_device_create() already exists
the error handling, so amba_put_device() only need to be added into
amba_deferred_retry().
Fixes: 19051358cbc0 ("ARM: 9192/1: amba: fix memory leak in amba_device_try_add()") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
aq_nic_deinit() has been called while suspending, so we don't have to call
it again on resume.
Actually, call it again leads to another hang issue when resuming from
S3.
net: atlantic: remove deep parameter on suspend/resume functions
Below commit claims that atlantic NIC requires to reset the device on pm
op, and had set the deep to true for all suspend/resume functions.
commit f74dd8aaea2d ("net: atlantic: always deep reset on pm op, fixing up my null deref regression")
So, we could remove deep parameter on suspend/resume functions without
any functional change.
When creating VFs a kernel panic can happen when calling to
efx_ef10_try_update_nic_stats_vf.
When releasing a DMA coherent buffer, sometimes, I don't know in what
specific circumstances, it has to unmap memory with vunmap. It is
disallowed to do that in IRQ context or with BH disabled. Otherwise, we
hit this line in vunmap, causing the crash:
BUG_ON(in_interrupt());
This patch reenables BH to release the buffer.
Log messages when the bug is hit:
kernel BUG at mm/vmalloc.c:2727!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:vunmap+0x2e/0x30
...skip...
Call Trace:
__iommu_dma_free+0x96/0x100
efx_nic_free_buffer+0x2b/0x40 [sfc]
efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc]
efx_ef10_update_stats_vf+0x18/0x40 [sfc]
efx_start_all+0x15e/0x1d0 [sfc]
efx_net_open+0x5a/0xe0 [sfc]
__dev_open+0xe7/0x1a0
__dev_change_flags+0x1d7/0x240
dev_change_flags+0x21/0x60
...skip...
Fixes: abaa2a47a31d ("sfc: DMA the VF stats only when requested") Reported-by: Ma Yuying <yuma@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jan Beulich [Wed, 13 Jul 2022 09:19:55 +0000 (11:19 +0200)]
xen-netfront: re-order error checks in xennet_get_responses()
Check the retrieved grant reference first; there's no point trying to
have xennet_move_rx_slot() move invalid data (and further defer
recognition of the issue, likely making diagnosis yet more difficult).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jan Beulich [Wed, 13 Jul 2022 09:19:33 +0000 (11:19 +0200)]
xen-netfront: remove leftover call to xennet_tx_buf_gc()
In talk_to_netback(), called earlier from xennet_connect(), queues and
shared rings were just re-initialized, so all this function call could
result in is setting ->broken (again) right away in case any unconsumed
responses were found.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
seg6: fix skb checksum for SRH encapsulation/insertion
The Linux kernel supports Segment Routing Header (SRH)
encapsulation/insertion operations by providing the capability to: i)
encapsulate a packet in an outer IPv6 header with a specified SRH; ii)
insert a specified SRH directly after the IPv6 header of the packet.
Note that the insertion operation is also referred to as 'injection'.
The two operations are respectively supported by seg6_do_srh_encap() and
seg6_do_srh_inline(), which operate on the skb associated to the packet as
needed (e.g. adding the necessary headers and initializing them, while
taking care to recalculate the skb checksum).
seg6_do_srh_encap() and seg6_do_srh_inline() do not initialize the payload
length of the IPv6 header, which is carried out by the caller functions.
However, this approach causes the corruption of the skb checksum which
needs to be updated only after initialization of headers is completed
(thanks to Paolo Abeni for detecting this issue).
The patchset fixes the skb checksum corruption by moving the IPv6 header
payload length initialization from the callers of seg6_do_srh_encap() and
seg6_do_srh_inline() directly into these functions.
This patchset is organized as follows:
- patch 1/3, seg6: fix skb checksum evaluation in SRH
encapsulation/insertion;
(* SRH encapsulation/insertion available since v4.10)
- patch 2/3, seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps
behaviors;
(* SRv6 End.B6 and End.B6.Encaps behaviors available since v4.14)
- patch 3/3, seg6: bpf: fix skb checksum in bpf_push_seg6_encap();
(* bpf IPv6 Segment Routing helpers available since v4.18)
Andrea Mayer [Tue, 12 Jul 2022 17:58:37 +0000 (19:58 +0200)]
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use
the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment
Routing Header (SRH) or insert an SRH between the IPv6 header and the
payload.
To achieve this result, such helper functions rely on bpf_push_seg6_encap()
which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the
required operation (i.e. encap/inline).
This patch removes the initialization of the IPv6 header payload length
from bpf_push_seg6_encap(), as it is now handled properly by
seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum.
Fixes: 58efdeab0536 ("bpf: Add IPv6 Segment Routing helpers") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrea Mayer [Tue, 12 Jul 2022 17:58:36 +0000 (19:58 +0200)]
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions
seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the
packet within an outer IPv6 header with the specified Segment Routing
Header (SRH); ii) insert the specified SRH directly after the IPv6
header of the packet.
This patch removes the initialization of the IPv6 header payload length
from the input_action_end_b6{_encap}() functions, as it is now handled
properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb
checksum.
Fixes: 4afe673f2e87 ("ipv6: sr: implement several seg6local actions") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Andrea Mayer [Tue, 12 Jul 2022 17:58:35 +0000 (19:58 +0200)]
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
Support for SRH encapsulation and insertion was introduced with
commit 7ab7a75aa79e ("ipv6: sr: add support for SRH encapsulation and
injection with lwtunnels"), through the seg6_do_srh_encap() and
seg6_do_srh_inline() functions, respectively.
The former encapsulates the packet in an outer IPv6 header along with
the SRH, while the latter inserts the SRH between the IPv6 header and
the payload. Then, the headers are initialized/updated according to the
operating mode (i.e., encap/inline).
Finally, the skb checksum is calculated to reflect the changes applied
to the headers.
The IPv6 payload length ('payload_len') is not initialized
within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e.
the caller of seg6_do_srh_{inline,encap}().
However, this operation invalidates the skb checksum, since the
'payload_len' is updated only after the checksum is evaluated.
To solve this issue, the initialization of the IPv6 payload length is
moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}()
functions and before the skb checksum update takes place.
Fixes: 7ab7a75aa79e ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Set the maximum time firmware should poll for a link.
If not set firmware could block CPU for a long time resulting
in mailbox failures. If link doesn't come up within 1second,
firmware will anyway notify the status as and when LINK comes up
Jakub Kicinski [Thu, 14 Jul 2022 03:16:03 +0000 (20:16 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-12
This series contains updates to ice driver only.
Paul fixes detection of E822 devices for firmware update and changes NVM
read for snapshot creation to be done in chunks as some systems cannot
read the entire NVM in the allotted time.
====================
Use after free is detected by kfence when disabling sriov. What was read
after being freed was vf->pci_dev: it was freed from pci_disable_sriov
and later read in efx_ef10_sriov_free_vf_vports, called from
efx_ef10_sriov_free_vf_vswitching.
Set the pointer to NULL at release time to not trying to read it later.
Reproducer and dmesg log (note that kfence doesn't detect it every time):
$ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
$ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs
BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224):
efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc]
efx_ef10_pci_sriov_disable+0x38/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
allocated by task 6771 on cpu 10 at 3137.860196s:
pci_alloc_dev+0x21/0x60
pci_iov_add_virtfn+0x2a2/0x320
sriov_enable+0x212/0x3e0
efx_ef10_sriov_configure+0x67/0x80 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xba/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
freed by task 6771 on cpu 12 at 3170.991309s:
device_release+0x34/0x90
kobject_cleanup+0x3a/0x130
pci_iov_remove_virtfn+0xd9/0x120
sriov_disable+0x30/0xe0
efx_ef10_pci_sriov_disable+0x57/0x70 [sfc]
efx_pci_sriov_configure+0x24/0x40 [sfc]
sriov_numvfs_store+0xfe/0x140
kernfs_fop_write_iter+0x11c/0x1b0
new_sync_write+0x11f/0x1b0
vfs_write+0x1eb/0x280
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: f6bd89c2dd99f ("sfc: create vports for VFs and assign random MAC addresses") Reported-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steve French [Tue, 12 Jul 2022 05:11:42 +0000 (00:11 -0500)]
smb3: workaround negprot bug in some Samba servers
Mount can now fail to older Samba servers due to a server
bug handling padding at the end of the last negotiate
context (negotiate contexts typically are rounded up to 8
bytes by adding padding if needed). This server bug can
be avoided by switching the order of negotiate contexts,
placing a negotiate context at the end that does not
require padding (prior to the recent netname context fix
this was the case on the client).
Fixes: cc725151f990 ("smb3: fix empty netname context on secondary channels") Reported-by: Julian Sikorski <belegdol@gmail.com> Tested-by: Julian Sikorski <belegdol+github@gmail.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
net/mlx5e: Remove the duplicating check for striding RQ when enabling LRO
LRO requires striding RQ and checks that it's enabled at two places:
mlx5e_fix_features and set_feature_lro. This commit keeps only one check
at mlx5e_fix_features and removes the duplicating one in
set_feature_lro.
net/mlx5e: Move the LRO-XSK check to mlx5e_fix_features
LRO is mutually exclusive with XSK. When LRO is enabled, it checks
whether XSK is active. This commit moves this check to a more correct
place at mlx5e_fix_features.
Recent net commit 9ae5207feabb ("net/mlx5e: Fix matchall police parameters
validation") removed notexceed action id validation from
mlx5e_police_validate() and left it up to callers. However, since
tc_act_can_offload_police() only exists in net-next its validation is
extended in this dedicated followup patch.
Comparison of eth_ft->ft with NULL is useless, because
get_flow_table() returns either pointer 'eth_ft'
such that eth_ft->ft != NULL, or an erroneous value that is
handled on return, causing mlx5e_ethtool_flow_replace()
to terminate before checking whether eth_ft->ft equals NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Vlad Buslov [Fri, 3 Jun 2022 13:32:03 +0000 (16:32 +0300)]
net/mlx5: Bridge, implement QinQ support
Implement support for new 802.1ad VLAN protocol type. Create new flow
groups that handle svlan tags. Create FDB flows with svlan tag match when
bridge VLAN is set to QinQ.
Vlad Buslov [Fri, 3 Jun 2022 19:35:41 +0000 (22:35 +0300)]
net/mlx5: Bridge, implement infrastructure for VLAN protocol change
Current implementation only supports 802.1Q VLAN Ethernet protocol. That
protocol type is assumed by default and
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification is ignored. To prepare
for supporting 802.1ad protocol in following patches implement the
necessary infrastructure to allow the user to dynamically change the VLAN
protocol:
- Handle SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL notification by flushing
FDB and re-creating VLAN modify header actions with new protocol. In this
patch the only allowed dynamic VLAN protocol value is ETH_P_8021Q.
- Save current VLAN protocol in per-bridge instance variable. Use the
dynamic variable instead of hardcoded values in mlx5 bridge code. Create
VLAN flow groups and flows based on current mlx5_esw_bridge->vlan_proto
value instead of assuming 802.1Q ethertype.
- Extract common flow group creation code into dedicated functions in order
to be reused for creating QinQ groups in following patches.
Following patches in series need to re-create VLAN actions when user
changes VLAN protocol. Extract the code that creates VLAN push/pop actions
into dedicated function in order to be reused in next patch.
Vlad Buslov [Fri, 3 Jun 2022 15:23:22 +0000 (18:23 +0300)]
net/mlx5: Bridge, rename filter fg to vlan_filter
Following patches in series introduce new qinq filtering group. To improve
readability rename the existing group in function, variable and definition
names to include "vlan" in order to make it easy to distinguish from
upcoming qinq group.
Vlad Buslov [Thu, 26 May 2022 16:42:04 +0000 (19:42 +0300)]
net/mlx5: Bridge, refactor groups sizes and indices
Following patches in the series introduce additional flow groups for QinQ
support. With increased number of groups it becomes cumbersome to calculate
groups sizes as fractions of the table size. Instead, manually define sizes
of specific group types and ensure that totals are still correct by static
assertions. Having specific table size is important for firmware resource
management.
Tariq Toukan [Wed, 8 Jun 2022 04:52:31 +0000 (07:52 +0300)]
net/mlx5: debugfs, Add num of in-use FW command interface slots
Expose the number of busy / in-use slots in the FW command interface via
a read-only debugfs entry. This improves observability and helps in the
performance bottleneck analysis.
Michael Guralnik [Thu, 19 May 2022 09:22:55 +0000 (12:22 +0300)]
net/mlx5: Expose vnic diagnostic counters for eswitch managed vports
Expose on vport group managers debug counters for their managed vports.
Counters are exposed through debugfs, the directory will be present only
for functions that are eswitch managers and only counters that are
supported on their specific HW/FW will be exposed.
Example:
$ ls /sys/kernel/debug/mlx5/0000:08:00.0/esw/
pf sf_8 vf_0 vf_1
$ ls -l /sys/kernel/debug/mlx5/0000:08:00.0/esw/vf_0/vnic_diag/
cq_overrun
quota_exceeded_command
total_q_under_processor_handle
invalid_command
send_queue_priority_update_flow
List of all counter added:
total_q_under_processor_handle - number of queues in error state due to an
async error or errored command.
send_queue_priority_update_flow - number of QP/SQ priority/SL update
events.
cq_overrun - number of times CQ entered an error state due to an
overflow.
async_eq_overrun -number of time an EQ mapped to async events was
overrun.
comp_eq_overrun - number of time an EQ mapped to completion events was
overrun.
quota_exceeded_command - number of commands issued and failed due to quota
exceeded.
invalid_command - number of commands issued and failed dues to any reason
other than quota exceeded.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Yishai Hadas [Thu, 2 Jun 2022 09:47:34 +0000 (12:47 +0300)]
net/mlx5: Use software VHCA id when it's supported
Use software VHCA id when it's supported by the firmware.
A unique id is allocated upon mlx5_mdev_init() and freed upon
mlx5_mdev_uninit(), as such it stays the same during the full life cycle
of the device including upon health recovery if occurred.
The conjunction of sw_vhca_id with sw_owner_id will be a global unique
id per function which uses mlx5_core.
The sw_vhca_id is set upon init_hca command and is used to specify the
VHCA that the NIC vport is affiliated with.
This functionality is needed upon migration of VM which is MPV based.
(i.e. multi port device).
vf/remap: return the amount of bytes actually deduplicated
When using the FIDEDUPRANGE ioctl, in case of success the requested size
is returned. In some cases this might not be the actual amount of bytes
deduplicated.
This change modifies vfs_dedupe_file_range() to report the actual amount
of bytes deduplicated, instead of the requested amount.
Link: https://lore.kernel.org/linux-fsdevel/5548ef63-62f9-4f46-5793-03165ceccacc@tu-darmstadt.de/ Reported-by: Ansgar Lößer <ansgar.loesser@kom.tu-darmstadt.de> Reported-by: Max Schlecht <max.schlecht@informatik.hu-berlin.de> Reported-by: Björn Scheuermann <scheuermann@kom.tu-darmstadt.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Darrick J Wong <djwong@kernel.org> Signed-off-by: Ansgar Lößer <ansgar.loesser@kom.tu-darmstadt.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
"Fix an old and subtle bug in the migration path.
css_sets are used to track tasks and migrations are tasks moving from
a group of css_sets to another group of css_sets. The migration path
pins all source and destination css_sets in the prep stage.
Unfortunately, it was overloading the same list_head entry to track
sources and destinations, which got confused for migrations which are
partially identity leading to use-after-frees.
Fixed by using dedicated list_heads for tracking sources and
destinations"
* tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Use separate src/dst nodes when preloading css_sets for migration
Dave Chinner [Wed, 13 Jul 2022 07:49:15 +0000 (17:49 +1000)]
fs/remap: constrain dedupe of EOF blocks
If dedupe of an EOF block is not constrainted to match against only
other EOF blocks with the same EOF offset into the block, it can
match against any other block that has the same matching initial
bytes in it, even if the bytes beyond EOF in the source file do
not match.
Fix this by constraining the EOF block matching to only match
against other EOF blocks that have identical EOF offsets and data.
This allows "whole file dedupe" to continue to work without allowing
eof blocks to randomly match against partial full blocks with the
same data.
Jianglei Nie [Tue, 12 Jul 2022 01:10:37 +0000 (09:10 +0800)]
ima: Fix potential memory leak in ima_init_crypto()
On failure to allocate the SHA1 tfm, IMA fails to initialize and exits
without freeing the ima_algo_array. Add the missing kfree() for
ima_algo_array to avoid the potential memory leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Fixes: 4ded3392b061 ("ima: Allocate and initialize tfm for each PCR bank") Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
ima: force signature verification when CONFIG_KEXEC_SIG is configured
Currently, an unsigned kernel could be kexec'ed when IMA arch specific
policy is configured unless lockdown is enabled. Enforce kernel
signature verification check in the kexec_file_load syscall when IMA
arch specific policy is configured.
Nick Bowler [Wed, 13 Jul 2022 01:58:35 +0000 (21:58 -0400)]
net: sunhme: output link status with a single print.
This driver currently prints the link status using four separate
printk calls, which these days gets presented to the user as four
distinct messages, not exactly ideal:
[ 32.582778] eth0: Link is up using
[ 32.582828] internal
[ 32.582837] transceiver at
[ 32.582888] 100Mb/s, Full Duplex.
Restructure the display_link_mode function to use a single netdev_info
call to present all this information as a single message, which is much
nicer:
[ 33.640143] hme 0000:00:01.1 eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.
The display_forced_link_mode function has a similar structure, so adjust
it in a similar fashion.
Signed-off-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Wed, 13 Jul 2022 03:31:11 +0000 (11:31 +0800)]
r8152: fix accessing unset transport header
A warning is triggered by commit f588aa3f3718 ("net: warn if transport
header was not set"). The warning is harmless, because the value from
skb_transport_offset() is only used for skb_is_gso() is true or the
skb->ip_summed is equal to CHECKSUM_PARTIAL.
Fixes: f588aa3f3718 ("net: warn if transport header was not set") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sebin Sebastian [Wed, 13 Jul 2022 07:38:58 +0000 (13:08 +0530)]
octeontx2-af: returning uninitialized variable
Fix coverity error 'use of uninitialized variable'. err is uninitialized
and is returned which can lead to unintended results. err has been replaced
with -einval.
Coverity issue: 1518921 (uninitialized scalar variable)
Signed-off-by: Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The include is in line 14 and 23. Remove the duplicate.
Fix following checkincludes warning:
./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: linux/bitfield.h is included more than once.
./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: rvu_npc_hash.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Jul 2022 13:28:52 +0000 (14:28 +0100)]
Merge tag 'wireless-next-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly large set of updates for next, highlights:
ath10k
* ethernet frame format support
rtw89
* TDLS support
cfg80211/mac80211
* airtime fairness fixes
* EHT support continued, especially in AP mode
* initial (and still major) rework for multi-link
operation (MLO) from 802.11be/wifi 7
As usual, also many small updates/cleanups/fixes/etc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 13 Jul 2022 13:27:38 +0000 (14:27 +0100)]
Merge tag 'wireless-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A small set of fixes for
* queue selection in mesh/ocb
* queue handling on interface stop
* hwsim virtio device vs. some other virtio changes
* dt-bindings email addresses
* color collision memory allocation
* a const variable in rtw88
* shared SKB transmit in the ethernet format path
* P2P client port authorization
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Tue, 12 Jul 2022 14:42:25 +0000 (17:42 +0300)]
net: stmmac: fix leaks in probe
These two error paths should clean up before returning.
Fixes: 3c7d91cd5f9a ("net: stmmac: Add Ingenic SoCs MAC support.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
====================
net: phy: mxl-gpy: version fix and improvements
Fix the version reporting which was introduced earlier. The version will
not change during runtime, so cache it and save a PHY read on every auto
negotiation. Also print the version in a human readable form.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Tue, 12 Jul 2022 13:15:54 +0000 (15:15 +0200)]
net: phy: mxl-gpy: print firmware in human readable form
Now having a major and a minor number, also print the firmware in
human readable form "major.minor". Still keep the 4-digit hexadecimal
representation because that form is used in the firmware changelog
documents. Also, drop the "release" string assuming that most common
case, but make it clearer that the user is running a test version.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Tue, 12 Jul 2022 13:15:51 +0000 (15:15 +0200)]
net: phy: mxl-gpy: fix version reporting
The commit f0d7863ca008 ("net: phy: mxl-gpy: add temperature sensor")
will overwrite the return value and the reported version will be wrong.
Fix it.
Fixes: f0d7863ca008 ("net: phy: mxl-gpy: add temperature sensor") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David Lamparter [Tue, 12 Jul 2022 12:10:02 +0000 (14:10 +0200)]
net: ip6mr: add RTM_GETROUTE netlink op
The IPv6 multicast routing code previously implemented only the dump
variant of RTM_GETROUTE. Implement single MFC item retrieval by copying
and adapting the respective IPv4 code.
Tested against FRRouting's IPv6 PIM stack.
Signed-off-by: David Lamparter <equinox@diac24.net> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: devlink: move unlocked function prototypes alongside the locked ones
Maintain the same order as it is in devlink.c for function prototypes.
The most of the locked variants would very likely soon be removed
and the unlocked version would be the only one.
Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: devlink: use helpers to work with devlink->lock mutex
As far as the lock helpers exist as the drivers need to work with the
devlink->lock mutex, use the helpers internally in devlink.c in order to
be consistent.
Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
net: devlink: fix unlocked vs locked functions descriptions
To be unified with the rest of the code, the unlocked version (devl_*)
of function should have the same description in documentation as the
locked one. Add the missing documentation. Also, add "Context"
annotation for the locked versions where it is missing.
Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
octeontx2-af: Skip CGX/RPM probe incase of zero lmac count
In few error cases MAC(CGX/RPM) block is having 0 lmacs.
AF driver uses MAC block with lmac pair to get firmware
data etc. These commands will fail as there is no LMAC
associated with MAC block.
This patch skips the probe of these MAC blocks such that AF driver
uses correct MAC block and LMAC pair for firmware communication and
define new LMAC_AF_ERROR types for command timeout etc.
This patch also enables channel back pressure for all LMACs.
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Liang He [Tue, 12 Jul 2022 06:14:17 +0000 (14:14 +0800)]
net: ftgmac100: Hold reference returned by of_get_child_by_name()
In ftgmac100_probe(), we should hold the refernece returned by
of_get_child_by_name() and use it to call of_node_put() for
reference balance.
Fixes: 11ada22f905c ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net>
nexthop: Fix data-races around nexthop_compat_mode.
While reading nexthop_compat_mode, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: c42c4d1c4809 ("net: ipv4: add sysctl for nexthop api compatibility mode") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
raw: Fix a data-race around sysctl_raw_l3mdev_accept.
While reading sysctl_raw_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: be10a4ae41de ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / kernel.git / log