Etienne Carriere [Tue, 12 May 2020 13:13:34 +0000 (15:13 +0200)]
dt-bindings: nvmem: stm32: new property for data access
Introduce boolean property st,non-secure-otp for OTP data located
in a factory programmed area that only secure firmware can access
by default and that shall be reachable from the non-secure world.
This change also allows additional properties for NVMEM nodes that
were forbidden prior this change.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Rob Herring <robh@kernel.org>
The arm,gic-400 compatible is probably the best matching string for the
GIC in most modern SoCs, but was only introduced later into the kernel.
For historic reasons and to keep compatibility, some SoC DTs were thus
using a combination of this name and one of the older strings, which
currently the binding denies.
Add a stanza to the DT binding to allow "arm,gic-400", followed by
either "arm,cortex-a15-gic" or "arm,cortex-a7-gic". This fixes binding
compliance for quite some SoC .dtsi files in the kernel tree.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Tue, 12 May 2020 20:45:43 +0000 (15:45 -0500)]
dt-bindings: Fix incorrect 'reg' property sizes
The examples template is a 'simple-bus' with a size of 1 cell for
had between 2 and 4 cells which really only errors on I2C or SPI type
devices with a single cell.
The easiest fix in most cases is to change the 'reg' property to for 1 cell
address and size. In some cases with child devices having 2 cells, that
doesn't make sense so a bus node is needed.
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
The ti,j721e-ufs schema and example have a couple of problems related to
address properties. First, the default #size-cells and #address-cells
are 1 for examples, so they need to be overriden with a bus node.
Second, address translation for the child ufs node is broken because
'ranges', '#address-cells', and '#size-cells' are missing from the
schema.
Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Tue, 12 May 2020 20:45:39 +0000 (15:45 -0500)]
spi: dt-bindings: sifive: Add missing 2nd register region
The 'reg' description and example have a 2nd register region for memory
mapped flash, but the schema says there is only 1 region. Fix this.
Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: linux-spi@vger.kernel.org Cc: linux-riscv@lists.infradead.org Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org>
Vaisala Oyj is a company based in Finland and also has subsidiaries in other
countries. Vaisala develops, manufactures and markets innovative products and
services for environmental and industrial measurement.
https://www.vaisala.com/
Signed-off-by: Vesa Jääskeläinen <vesa.jaaskelainen@vaisala.com> Signed-off-by: Rob Herring <robh@kernel.org>
Paul Cercueil [Sun, 26 Apr 2020 18:58:55 +0000 (20:58 +0200)]
dt-bindings: serial: Convert ingenic,uart.txt to YAML
Convert the ingenic,uart.txt to a new ingenic,uart.yaml file.
A few things were changed in the process:
- the dmas and dma-names properties are now required.
- the ingenic,jz4770-uart and ingenic,jz4775-uart compatible strings now
require the ingenic,jz4760-uart string to be used as fallback, since
the hardware is compatible.
- the ingenic,jz4725b-uart compatible string was added, with a fallback
to ingenic,jz4740-uart.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Rob Herring <robh@kernel.org>
Paul Cercueil [Sun, 26 Apr 2020 18:58:54 +0000 (20:58 +0200)]
dt-bindings: i2c: Convert i2c-jz4780.txt to YAML
Convert the i2c-jz4780.txt file to ingenic,i2c.yaml.
Two things were changed in the process:
- the clock-frequency property can now only be set to the two values
that can be set by the hardware;
- the dmas and dma-names properties are now required.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
[robh: add ref to i2c-controller.yaml] Signed-off-by: Rob Herring <robh@kernel.org>
Paul Cercueil [Sun, 26 Apr 2020 18:58:49 +0000 (20:58 +0200)]
dt-bindings: clock: Convert ingenic,cgu.txt to YAML
Convert the ingenic,cgu.txt doc file to ingenic,cgu.yaml.
The binding documentation has been updated as well. The node can have a
child node that corresponds to the USB PHY, which happens to be present
in the middle of the CGU registers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Rob Herring <robh@kernel.org>
This arch_timer property was added in commit c950ca8c35ee
("clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability")
but I omitted the device tree binding documentation. Now
`make dtbs_check` prints the following warning for all A64 boards:
timer: 'allwinner,erratum-unknown1' does not match any of the regexes: 'pinctrl-[0-9]+'
Resolve this by documenting the erratum property.
Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Rob Herring <robh@kernel.org>
arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
Johan Jonker [Sat, 25 Apr 2020 15:40:37 +0000 (17:40 +0200)]
dt-bindings: gpu: add power-domains #cooling-cells to arm,mali-bifrost.yaml
A test with the command below gives this error:
arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: gpu@ff400000:
'#cooling-cells', 'power-domains'
do not match any of the regexes: 'pinctrl-[0-9]+'
With the conversion to yaml it also filters things
in a node that are used by other drivers like
'#cooling-cells' and 'power-domains'
for Rockchip px30 gpu nodes,
so add them to 'arm,mali-bifrost.yaml'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/gpu/
arm,mali-bifrost.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
dt-bindings: iommu: renesas,ipmmu-vmsa: convert to json-schema
Convert Renesas VMSA-Compatible IOMMU bindings documentation
to json-schema.
Note that original documentation doesn't mention renesas,ipmmu-vmsa
for R-Mobile APE6. But, R-Mobile APE6 is similar to the R-Car
Gen2. So, renesas,ipmmu-r8a73a4 belongs the renesas,ipmmu-vmsa
section.
docs: dt: convert overlay-notes.txt to ReST format
- Add a SPDX header;
- Adjust document title;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
- Add a SPDX header;
- Adjust document and section titles;
- Adjust numerated list markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
- Add a SPDX header;
- Adjust document title;
- Use footnoote markups;
- Some whitespace fixes and new line breaks;
- Mark literal blocks as such;
- Add it to devicetree/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org>
Frank Rowand [Tue, 28 Jan 2020 00:37:18 +0000 (18:37 -0600)]
of: Documentation: change overlay example to use current syntax
The overlay implementation details in the compiled (DTB) file are
now properly implemented by the dtc compiler and should no longer
be hard coded in the source file.
Signed-off-by: Frank Rowand <frank.rowand@sony.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org>
Andre Przywara [Thu, 30 Apr 2020 21:10:54 +0000 (22:10 +0100)]
dt-bindings: arm: Add Calxeda system registers json-schema binding
The Calxeda system registers are a collection of MMIO register
controlling several more general aspects of the SoC.
Beside for some power management tasks this node is also somewhat
abused as the container for the clock nodes.
Add a binding in DT schema format using json-schema.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
Andre Przywara [Thu, 30 Apr 2020 21:10:53 +0000 (22:10 +0100)]
dt-bindings: ipmi: Convert IPMI-SMIC bindings to json-schema
Convert the generic IPMI controller bindings to DT schema format
using json-schema.
The device_type property is deprecated for most node per the DT spec,
but at least the Linux driver matches on it, so I keep it in.
The Linux driver parses for some additional and optional properties,
but there are no in-tree users. Let's allow extra properties to cover
any other users.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
Andre Przywara [Thu, 30 Apr 2020 21:10:52 +0000 (22:10 +0100)]
dt-bindings: memory-controllers: Convert Calxeda DDR to json-schema
Convert the Calxeda DDR memory controller binding to DT schema format
using json-schema.
Although this technically covers the whole DRAM controller, the
intention to use it only for error reporting and mapping fault addresses
to DRAM chips.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
Andre Przywara [Thu, 30 Apr 2020 21:10:50 +0000 (22:10 +0100)]
dt-bindings: phy: Convert Calxeda ComboPHY binding to json-schema
Convert the Calxeda ComboPHY binding to DT schema format using
json-schema.
There is no driver in the Linux kernel matching the compatible
string, but the nodes are parsed by the SATA driver, which links to them
using its port-phys property.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
Andre Przywara [Thu, 30 Apr 2020 21:10:47 +0000 (22:10 +0100)]
dt-bindings: clock: Convert Calxeda clock bindings to json-schema
Convert the Calxeda clock bindings to DT schema format using json-schema.
This just covers the actual PLL and divider clock nodes. In the actual
DTs they are somewhat unconnected (no ranges or bus compatible) children
of the sregs node, but for the actual clock bindings this is not
relevant.
One oddity is that the addresses are relative to the parent node,
without that being pronounced using a ranges property.
But this is too late to fix now.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Thu, 16 Apr 2020 00:55:49 +0000 (19:55 -0500)]
dt-bindings: Remove cases of 'allOf' containing a '$ref'
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Scripted with ruamel.yaml with some manual fixups. Some minor whitespace
changes from the script.
Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for I2C Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Reviewed-by: Stephen Boyd <sboyd@kernel.org> # clock Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Thu, 5 Mar 2020 22:37:48 +0000 (16:37 -0600)]
dt-bindings: Add a minimum version check for dtschema
The dtschema package must be somewhat up to date as the tools and
meta-schema checks are still evolving. Implement a version check,
so this can be enforced. This will help ensure new schema submissions
get checked against the latest meta-schemas.
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
Slightly better examples. The original example was for an OMAP serial
port, which is not even described by this binding, but by
omap_serial.txt instead.
Added compatible strings, that were used, byt not documented:
andestech,uart16550, cavium,octeon-3860-uart, fsl,16550-FIFO64,
nvidia,tegra186-uart, nvidia,tegra194-uart, nxp,lpc1850-uart,
opencores,uart16550-rtlsvn105, ralink,mt7620a-uart, ralink,rt3052-uart,
ralink,rt3883-uart and xlnx,xps-uart16550-2.00.b.
Removed "serial" compatible string. It's redundant with the node name
(which, in OFW, serves the same purpose as the compatible string).
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[robh: allow additional properties. clocks/clock-frequency can be
optional on original 8250 series with standard clocks] Signed-off-by: Rob Herring <robh@kernel.org>
dt-bindings: serial: Move Marvell compatible string to 8250 binding doc
These ports are compatible with NS8250 and handled by the same driver.
Get rid of the extra document that fails to document the properties that
are actually supported.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Rob Herring <robh@kernel.org>
When creating a consumer/supplier relationship between two devices,
make sure the supplier node is actually active. Otherwise this will
create a link relationship that will never be fulfilled. This, in the
worst case scenario, will hang the system during boot.
Note that, in practice, the fact that a device-tree represented
consumer/supplier relationship isn't fulfilled will not prevent devices
from successfully probing.
Fixes: a3e1d1a7f5fc ("of: property: Add functional dependency link from DT bindings") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Rob Herring <robh@kernel.org>
of: property: Fix create device links for all child-supplier dependencies
Upon adding a new device from a DT node, we scan its properties and its
children's properties in order to create a consumer/supplier
relationship between the device and the property provider.
That said, it's possible for some of the node's children to be disabled,
which will create links that'll never be fulfilled.
To get around this, use the for_each_available_child_of_node() function
instead of for_each_available_node() when iterating over the node's
children.
Fixes: d4387cd11741 ("of: property: Create device links for all child-supplier depencencies") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Rob Herring <robh@kernel.org>
of: property: Don't retry device_link_add() upon failure
When of_link_to_phandle() was implemented initially, there was no way to
tell if device_link_add() was failing because the supplier device hasn't
been parsed yet, hasn't been added yet, the links were creating a cycle,
etc. Some of these were transient errors that'd go away at a later
point.
However, with the current set of improved checks, if device_link_add()
fails, it'll only be for permanent errors like cycles or out-of-memory
errors.
Also, with the addition of DL_FLAG_SYNC_STATE_ONLY flag [1] to device
links, all the valid dependency cycles due to "proxy" device links
(needed for correctness of sync_state() device callback) will never fail
device_link_add() due to cycles.
So, continuing to retry failing device links (by returning -EAGAIN) is
no longer useful. At worst, it prevents platforms from setting
fw_devlink=on (or better) because it prevents proper boot up. So, let's
not do that anymore.
[1] - https://lore.kernel.org/lkml/20191028220027.251605-1-saravanak@google.com/ Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Rob Herring <robh@kernel.org>
Douglas Anderson [Thu, 23 Apr 2020 18:10:27 +0000 (11:10 -0700)]
dt-bindings: phy: qcom-qusb2: Fix defaults
The defaults listed in the bindings don't match what the code is
actually doing. Presumably existing users care more about keeping
existing behavior the same, so change the bindings to match the code
in Linux.
The "qcom,preemphasis-level" default has been wrong for quite a long
time (May 2018). The other two were recently added.
As some evidence that these values are wrong, this is from the Linux
driver:
- qcom,preemphasis-level: sets "PORT_TUNE1", lower 2 bits. Driver
programs PORT_TUNE1 to 0x30 by default and (0x30 & 0x3) = 0.
- qcom,bias-ctrl-value: sets "PLL_BIAS_CONTROL_2", lower 6 bits.
Driver programs PLL_BIAS_CONTROL_2 to 0x20 by default and (0x20 &
0x3f) = 0x20 = 32.
- qcom,hsdisc-trim-value: sets "PORT_TUNE2", lower 2 bits. Driver
programs PORT_TUNE2 to 0x29 by default and (0x29 & 0x3) = 1.
Fixes: 1e6f134eb67a ("dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters") Fixes: a8b70ccf10e3 ("dt-bindings: phy-qcom-usb2: Add support to override tuning values") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Fri, 24 Apr 2020 16:13:18 +0000 (11:13 -0500)]
dt-bindings: Fix erroneous 'additionalProperties'
There's several cases of json-schema 'additionalProperties' at the wrong
indentation level which has the effect of making them DT properties. This
is harmless, but let's fix them so a meta-schema check for this can be
added.
In all the cases, either the 'additionalProperties' was extra or doesn't
work because there's a $ref to more properties. In the latter case, we
can use 'unevaluatedProperties' instead.
Reported-by: Iskren Chernev <iskren.chernev@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Saravanan Sekar <sravanhome@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Tue, 21 Apr 2020 20:42:02 +0000 (15:42 -0500)]
dt-bindings: Fix command line length limit calling dt-mk-schema
As the number of schemas has increased, we're starting to hit the error
"execvp: /bin/sh: Argument list too long". This is due to passing all the
schema files on the command line to dt-mk-schema. It currently is only
with out of tree builds and is intermittent depending on the file path
lengths.
Commit 2ba06cd8565b ("kbuild: Always validate DT binding examples") made
hitting this proplem more likely since the example validation now always
gets the full list of schemas.
Fix this by passing the schema file list in a pipe and using xargs. We end
up doing the find twice, but the time is insignificant compared to the
dt-mk-schema time.
dt-bindings: gpu: mali-utgard: Add the #cooling-cells property
The GPU can be one of the big heat sources on a SoC. Allow the
"#cooling-cells" property to be specified for ARM Mali Utgard GPUs so
the GPU clock speeds (and voltages) can be reduced to prevent a SoC from
overheating.
Reviewed-by: Qiang Yu <yuq825@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org>
Johan Jonker [Sat, 11 Apr 2020 12:25:07 +0000 (14:25 +0200)]
dt-bindings: sram: convert rockchip-pmu-sram bindings to yaml
Current dts files with 'rockchip-pmu-sram' compatible nodes
are now verified with sram.yaml, although the original
text document still exists. Merge rockchip-pmu-sram.txt
with sram.yaml by adding it as description with an example.
Make #address-cells, #size-cells and ranges optional
if there are no child nodes to prevent yaml warnings.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
kbuild: check libyaml installation for 'make dt_binding_check'
If you run 'make dtbs_check' without installing the libyaml package,
the error message "dtc needs libyaml ..." is shown.
This should be checked also for 'make dt_binding_check' because dtc
needs to validate *.example.dts extracted from *.yaml files.
It is missing since commit 4f0e3a57d6eb ("kbuild: Add support for DT
binding schema checks"), but this fix-up is applicable only after commit e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check
in a single command").
I gave the Fixes tag to the latter in case somebody is interested in
back-porting this.
Fixes: e10c4321dc1e ("kbuild: allow to run dt_binding_check and dtbs_check in a single command") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
Frank Rowand [Thu, 16 Apr 2020 21:42:50 +0000 (16:42 -0500)]
of: unittest: kmemleak in duplicate property update
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 5 of 5.
When overlay 'overlay_bad_add_dup_prop' is applied, the apply code
properly detects that a memory leak will occur if the overlay is removed
since the duplicate property is located in a base devicetree node and
reports via printk():
OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail
OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail
The overlay is removed when the apply code detects multiple changesets
modifying the same property. This is reported via printk():
As a result of this error, the overlay is removed resulting in the
expected memory leak.
Add another device node level to the overlay so that the duplicate
property is located in a node added by the overlay, thus no memory
leak will occur when the overlay is removed.
Thus users of kmemleak will not have to debug this leak in the future.
Fixes: 2fe0e8769df9 ("of: overlay: check prevents multiple fragments touching same property") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
Frank Rowand [Thu, 16 Apr 2020 21:42:49 +0000 (16:42 -0500)]
of: overlay: kmemleak in dup_and_fixup_symbol_prop()
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 4 of 5.
target_path was not freed in the non-error path.
Fixes: e0a58f3e08d4 ("of: overlay: remove a dependency on device node full_name") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
Frank Rowand [Thu, 16 Apr 2020 21:42:48 +0000 (16:42 -0500)]
of: unittest: kmemleak in of_unittest_overlay_high_level()
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 3 of 5.
of_unittest_overlay_high_level() failed to kfree the newly created
property when the property named 'name' is skipped.
Fixes: 39a751a4cb7e ("of: change overlay apply input data from unflattened to FDT") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
Frank Rowand [Thu, 16 Apr 2020 21:42:47 +0000 (16:42 -0500)]
of: unittest: kmemleak in of_unittest_platform_populate()
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.
of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices). Fix the platform
device reference counts so that the memory will be freed.
Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
Frank Rowand [Thu, 16 Apr 2020 21:42:46 +0000 (16:42 -0500)]
of: unittest: kmemleak on changeset destroy
kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.
of_unittest_changeset() reaches deeply into the dynamic devicetree
functions. Several nodes were left with an elevated reference
count and thus were not properly cleaned up. Fix the reference
counts so that the memory will be freed.
Fixes: 201c910bd689 ("of: Transactional DT support.") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org>
Changeset f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas")
split Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
into several files. Yet, it kept the old place at MAINTAINERS.
Update it to point to the new place.
Fixes: f5a98bfe7b37 ("dt-bindings: display: Convert Allwinner display pipeline to schemas") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
Fix various inconsistencies in schema indentation. Most of these are
list indentation which should be 2 spaces more than the start of the
enclosing keyword. This doesn't matter functionally, but affects running
scripts which do transforms on the schema files.
Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org>
projects / kernel.git / log