Linus Torvalds [Thu, 12 May 2022 17:21:44 +0000 (10:21 -0700)]
Merge tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fs fixes from Jan Kara:
"Three fixes that I'd still like to get to 5.18:
- add a missing sanity check in the fanotify FAN_RENAME feature
(added in 5.17, let's fix it before it gets wider usage in
userspace)
- udf fix for recently introduced filesystem corruption issue
- writeback fix for a race in inode list handling that can lead to
delayed writeback and possible dirty throttling stalls"
* tag 'fixes_for_v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Avoid using stale lengthOfImpUse
writeback: Avoid skipping inode writeback
fanotify: do not allow setting dirent events in mask of non-dir
Jan Kara [Tue, 10 May 2022 10:36:04 +0000 (12:36 +0200)]
udf: Avoid using stale lengthOfImpUse
udf_write_fi() uses lengthOfImpUse of the entry it is writing to.
However this field has not yet been initialized so it either contains
completely bogus value or value from last directory entry at that place.
In either case this is wrong and can lead to filesystem corruption or
kernel crashes.
Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 714251660b67 ("udf: Get rid of 0-length arrays in struct fileIdentDesc") Signed-off-by: Jan Kara <jack@suse.cz>
Jing Xia [Tue, 10 May 2022 02:35:14 +0000 (10:35 +0800)]
writeback: Avoid skipping inode writeback
We have run into an issue that a task gets stuck in
balance_dirty_pages_ratelimited() when perform I/O stress testing.
The reason we observed is that an I_DIRTY_PAGES inode with lots
of dirty pages is in b_dirty_time list and standard background
writeback cannot writeback the inode.
After studing the relevant code, the following scenario may lead
to the issue:
This patch moves the dirty inode to b_dirty list when the inode
currently is not queued in b_io or b_more_io list at the end of
writeback_single_inode.
Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: stable@vger.kernel.org Fixes: d4c16982eb77 ("vfs: add support for a lazytime mount option") Signed-off-by: Jing Xia <jing.xia@unisoc.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220510023514.27399-1-jing.xia@unisoc.com
Linus Torvalds [Mon, 9 May 2022 15:48:59 +0000 (08:48 -0700)]
Merge tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi AMD suspend/resume + fan detection fixes
- two other small fixes
- one hardware-id addition
* tag 'platform-drivers-x86-v5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/surface: aggregator: Fix initialization order when compiling as builtin module
platform/surface: gpe: Add support for Surface Pro 8
platform/x86/intel: Fix 'rmmod pmt_telemetry' panic
platform/x86: thinkpad_acpi: Correct dual fan probe
platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops
platform/x86: thinkpad_acpi: Convert btusb DMI list to quirks
Amir Goldstein [Sat, 7 May 2022 08:00:28 +0000 (11:00 +0300)]
fanotify: do not allow setting dirent events in mask of non-dir
Dirent events (create/delete/move) are only reported on watched
directory inodes, but in fanotify as well as in legacy inotify, it was
always allowed to set them on non-dir inode, which does not result in
any meaningful outcome.
Until kernel v5.17, dirent events in fanotify also differed from events
"on child" (e.g. FAN_OPEN) in the information provided in the event.
For example, FAN_OPEN could be set in the mask of a non-dir or the mask
of its parent and event would report the fid of the child regardless of
the marked object.
By contrast, FAN_DELETE is not reported if the child is marked and the
child fid was not reported in the events.
Since kernel v5.17, with fanotify group flag FAN_REPORT_TARGET_FID, the
fid of the child is reported with dirent events, like events "on child",
which may create confusion for users expecting the same behavior as
events "on child" when setting events in the mask on a child.
The desired semantics of setting dirent events in the mask of a child
are not clear, so for now, deny this action for a group initialized
with flag FAN_REPORT_TARGET_FID and for the new event FAN_RENAME.
We may relax this restriction in the future if we decide on the
semantics and implement them.
Linus Torvalds [Sun, 8 May 2022 19:42:05 +0000 (12:42 -0700)]
Merge tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"Some reverts of existing patches, which were necessary because of boot
issues due to wrong CPU clock handling and cache issues which led to
userspace segfaults with 32bit kernels. Dave has a whole bunch of
upcoming cache fixes which I then plan to push in the next merge
window.
Other than that just small updates and fixes, e.g. defconfig updates,
spelling fixes, a clocksource fix, boot topology fixes and a fix for
/proc/cpuinfo output to satisfy lscpu"
* tag 'for-5.18/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
Revert "parisc: Increase parisc_cache_flush_threshold setting"
parisc: Mark cr16 clock unstable on all SMP machines
parisc: Fix typos in comments
parisc: Change MAX_ADDRESS to become unsigned long long
parisc: Merge model and model name into one line in /proc/cpuinfo
parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
parisc: Update 32- and 64-bit defconfigs
parisc: Only list existing CPUs in cpu_possible_mask
Revert "parisc: Fix patch code locking and flushing"
Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"
Linus Torvalds [Sun, 8 May 2022 18:38:23 +0000 (11:38 -0700)]
Merge tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix the DWARF CFI in our VDSO time functions, allowing gdb to
backtrace through them correctly.
- Fix a buffer overflow in the papr_scm driver, only triggerable by
hypervisor input.
- A fix in the recently added QoS handling for VAS (used for
communicating with coprocessors).
Thanks to Alan Modra, Haren Myneni, Kajol Jain, and Segher Boessenkool.
* tag 'powerpc-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
powerpc/vdso: Fix incorrect CFI in gettimeofday.S
powerpc/pseries/vas: Use QoS credits from the userspace
Linus Torvalds [Sun, 8 May 2022 18:21:54 +0000 (11:21 -0700)]
Merge tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A fix and an email address update:
- Prevent FPU state corruption.
The condition in irq_fpu_usable() grants FPU usage when the FPU is
not used in the kernel. That's just wrong as it does not take the
fpregs_lock()'ed regions into account. If FPU usage happens within
such a region from interrupt context, then the FPU state gets
corrupted.
That's a long standing bug, which got unearthed by the recent
changes to the random code.
- Josh wants to use his kernel.org email address"
* tag 'x86-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Prevent FPU state corruption
MAINTAINERS: Update Josh Poimboeuf's email address
Linus Torvalds [Sun, 8 May 2022 18:18:11 +0000 (11:18 -0700)]
Merge tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix and an email address update:
- Mark the NMI safe time accessors notrace to prevent tracer
recursion when they are selected as trace clocks.
- John Stultz has a new email address"
* tag 'timers-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Mark NMI safe time accessors as notrace
MAINTAINERS: Update email address for John Stultz
Linus Torvalds [Sun, 8 May 2022 18:10:17 +0000 (11:10 -0700)]
Merge tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A fix for the threaded interrupt core.
A quick sequence of request/free_irq() can result in a hang because
the interrupt thread did not reach the thread function and got stopped
in the kthread core already. That leaves a state active counter
arround which makes a invocation of synchronized_irq() on that
interrupt hang forever.
Ensure that the thread reached the thread function in request_irq() to
prevent that"
* tag 'irq-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Synchronize interrupt thread startup
Helge Deller [Sun, 8 May 2022 16:25:00 +0000 (18:25 +0200)]
parisc: Mark cr16 clock unstable on all SMP machines
The cr16 interval timers are not synchronized across CPUs, even with just
one dual-core CPU. This becomes visible if the machines have a longer
uptime.
parisc: Change MAX_ADDRESS to become unsigned long long
Dave noticed that for the 32-bit kernel MAX_ADDRESS should be a ULL,
otherwise this define would become 0:
MAX_ADDRESS (1UL << MAX_ADDRBITS)
It has no real effect on the kernel.
Signed-off-by: Helge Deller <deller@gmx.de> Noticed-by: John David Anglin <dave.anglin@bell.net>
parisc: Merge model and model name into one line in /proc/cpuinfo
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
In commit 6eaf8c6ac839 ("parisc: Switch from GENERIC_CPU_DEVICES to
GENERIC_ARCH_TOPOLOGY") GENERIC_CPU_DEVICES was unconditionally turned
off, but this triggers a warning in topology_add_dev(). Turning it back
on for the !SMP case avoids this warning.
Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: 6eaf8c6ac839 ("parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGY") Signed-off-by: Helge Deller <deller@gmx.de>
Linus Torvalds [Sun, 8 May 2022 17:28:22 +0000 (10:28 -0700)]
Merge tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull PASID fix from Thomas Gleixner:
"A single bugfix for the PASID management code, which freed the PASID
too early. The PASID needs to be tied to the mm lifetime, not to the
address space lifetime"
* tag 'core-urgent-2022-05-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Fix PASID use-after-free issue
Linus Torvalds [Sun, 8 May 2022 17:10:51 +0000 (10:10 -0700)]
Merge tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became slightly larger as I've been off in the last weeks.
The majority of changes here is about ASoC, fixes for dmaengine
and for addressing issues reported by CI, as well as other
device-specific small fixes.
Also, fixes for FireWire core stack and the usual HD-audio quirks
are included"
* tag 'sound-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
ASoC: atmel: mchp-pdmc: set prepare_slave_config
ASoC: max98090: Generate notifications on changes for custom control
ASoC: max98090: Reject invalid values in custom control put()
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers
firewire: core: extend card->lock in fw_core_handle_bus_reset
firewire: remove check of list iterator against head past the loop body
firewire: fix potential uaf in outbound_phy_packet_callback()
ASoC: rt9120: Correct the reg 0x09 size to one byte
ALSA: hda/realtek: Enable mute/micmute LEDs support for HP Laptops
ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec
ASoC: meson: axg-card: Fix nonatomic links
ASoC: meson: axg-tdm-interface: Fix formatters in trigger"
ASoC: soc-ops: fix error handling
ASoC: meson: Fix event generation for G12A tohdmi mux
ASoC: meson: Fix event generation for AUI CODEC mux
ASoC: meson: Fix event generation for AUI ACODEC mux
...
Willy Tarreau [Sun, 8 May 2022 09:37:08 +0000 (11:37 +0200)]
ataflop: use a statically allocated error counters
This is the last driver making use of fd_request->error_count, which is
easy to get wrong as was shown in floppy.c. We don't need to keep it
there, it can be moved to the atari_floppy_struct instead, so let's do
this.
Willy Tarreau [Sun, 8 May 2022 09:37:07 +0000 (11:37 +0200)]
floppy: use a statically allocated error counter
Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count. There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request. This reset now happens when entering
redo_fd_request() for a new request via set_next_request().
One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals. As such the error count is always for the "current" drive.
Takashi Iwai [Sun, 8 May 2022 08:49:25 +0000 (10:49 +0200)]
Merge tag 'asoc-fix-v5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A larger collection of fixes than I'd like, mainly because mixer-test
is making it's way into the CI systems and turning up issues on a wider
range of systems. The most substantial thing though is a revert and an
alternative fix for a dmaengine issue where the fix caused disruption
for some other configurations, the core fix is backed out an a driver
specific thing done instead.
Linus Torvalds [Sat, 7 May 2022 18:02:02 +0000 (11:02 -0700)]
Merge tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix the bounds check for the 'gpio-reserved-ranges' device property
in gpiolib-of
- drop the assignment of the pwm base number in gpio-mvebu (this was
missed by the patch doing it globally for all pwm drivers)
- fix the fwnode assignment (use own fwnode, not the parent's one) for
the GPIO irqchip in gpio-visconti
- update the irq_stat field before checking the trigger field in
gpio-pca953x
- update GPIO entry in MAINTAINERS
* tag 'gpio-fixes-for-v5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set)
gpio: visconti: Fix fwnode of GPIO IRQ
MAINTAINERS: update the GPIO git tree entry
gpio: mvebu: drop pwm base assignment
gpiolib: of: fix bounds check for 'gpio-reserved-ranges'
Linus Torvalds [Sat, 7 May 2022 17:47:51 +0000 (10:47 -0700)]
Merge tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A single revert for a change that isn't needed in 5.18, and a small
series for s390/dasd"
* tag 'block-5.18-2022-05-06' of git://git.kernel.dk/linux-block:
s390/dasd: Use kzalloc instead of kmalloc/memset
s390/dasd: Fix read inconsistency for ESE DASD devices
s390/dasd: Fix read for ESE with blksize < 4k
s390/dasd: prevent double format of tracks for ESE devices
s390/dasd: fix data corruption for ESE devices
Revert "block: release rq qos structures for queue without disk"
Linus Torvalds [Fri, 6 May 2022 21:32:16 +0000 (14:32 -0700)]
Merge tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Regression fixes in zone activation:
- move a loop invariant out of the loop to avoid checking space
status
- properly handle unlimited activation
Other fixes:
- for subpage, force the free space v2 mount to avoid a warning and
make it easy to switch a filesystem on different page size systems
- export sysfs status of exclusive operation 'balance paused', so the
user space tools can recognize it and allow adding a device with
paused balance
- fix assertion failure when logging directory key range item"
* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: export the balance paused state of exclusive operation
btrfs: fix assertion failure when logging directory key range item
btrfs: zoned: activate block group properly on unlimited active zone device
btrfs: zoned: move non-changing condition check out of the loop
btrfs: force v2 space cache usage for subpage mount
Linus Torvalds [Fri, 6 May 2022 20:19:11 +0000 (13:19 -0700)]
Merge tag 'nfs-for-5.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix a socket leak when setting up an AF_LOCAL RPC client
- Ensure that knfsd connects to the gss-proxy daemon on setup
Bugfixes:
- Fix a refcount leak when migrating a task off an offlined transport
- Don't gratuitously invalidate inode attributes on delegation return
- Don't leak sockets in xs_local_connect()
- Ensure timely close of disconnected AF_LOCAL sockets"
* tag 'nfs-for-5.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: attempt AF_LOCAL connect on setup"
SUNRPC: Ensure gss-proxy connects on setup
SUNRPC: Ensure timely close of disconnected AF_LOCAL sockets
SUNRPC: Don't leak sockets in xs_local_connect()
NFSv4: Don't invalidate inode attributes on delegation return
SUNRPC release the transport of a relocated task with an assigned transport
Linus Torvalds [Fri, 6 May 2022 18:42:58 +0000 (11:42 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- Account for family 17h event renumberings in AMD PMU emulation
- Remove CPUID leaf 0xA on AMD processors
- Fix lockdep issue with locking all vCPUs
- Fix loss of A/D bits in SPTEs
- Fix syzkaller issue with invalid guest state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Exit to userspace if vCPU has injected exception and invalid state
KVM: SEV: Mark nested locking of vcpu->lock
kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
KVM: x86/svm: Account for family 17h event renumberings in amd_pmc_perf_hw_id
KVM: x86/mmu: Use atomic XCHG to write TDP MMU SPTEs with volatile bits
KVM: x86/mmu: Move shadow-present check out of spte_has_volatile_bits()
KVM: x86/mmu: Don't treat fully writable SPTEs as volatile (modulo A/D)
KVM: VMX: Exit to userspace if vCPU has injected exception and invalid state
Exit to userspace with an emulation error if KVM encounters an injected
exception with invalid guest state, in addition to the existing check of
bailing if there's a pending exception (KVM doesn't support emulating
exceptions except when emulating real mode via vm86).
In theory, KVM should never get to such a situation as KVM is supposed to
exit to userspace before injecting an exception with invalid guest state.
But in practice, userspace can intervene and manually inject an exception
and/or stuff registers to force invalid guest state while a previously
injected exception is awaiting reinjection.
Fixes: dff4d2a1b44b ("KVM: VMX: Reject KVM_RUN if emulation is required with pending exception") Reported-by: syzbot+cfafed3bb76d3e37581b@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220502221850.131873-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Gonda [Mon, 2 May 2022 16:58:07 +0000 (09:58 -0700)]
KVM: SEV: Mark nested locking of vcpu->lock
svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all
source and target vcpu->locks. Unfortunately there is an 8 subclass
limit, so a new subclass cannot be used for each vCPU. Instead maintain
ownership of the first vcpu's mutex.dep_map using a role specific
subclass: source vs target. Release the other vcpu's mutex.dep_maps.
Fixes: 1167986334b9e ("KVM: SEV: Add support for SEV intra host migration") Reported-by: John Sperbeck<jsperbeck@google.com> Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Gonda <pgonda@google.com>
Message-Id: <20220502165807.529624-1-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Fri, 6 May 2022 16:50:25 +0000 (09:50 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A few recent regressions in rxe's multicast code, and some old driver
bugs:
- Error case unwind bug in rxe for rkeys
- Dot not call netdev functions under a spinlock in rxe multicast
code
- Use the proper BH lock type in rxe multicast code
- Fix idrma deadlock and crash
- Add a missing flush to drain irdma QPs when in error
- Fix high userspace latency in irdma during destroy due to
synchronize_rcu()
- Rare race in siw MPA processing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Change mcg_lock to a _bh lock
RDMA/rxe: Do not call dev_mc_add/del() under a spinlock
RDMA/siw: Fix a condition race issue in MPA request processing
RDMA/irdma: Fix possible crash due to NULL netdev in notifier
RDMA/irdma: Reduce iWARP QP destroy time
RDMA/irdma: Flush iWARP QP if modified to ERR from RTR state
RDMA/rxe: Recheck the MR in when generating a READ reply
RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core()
RDMA/rxe: Fix "Replace mr by rkey in responder resources"
Linus Torvalds [Fri, 6 May 2022 16:33:28 +0000 (09:33 -0700)]
Merge tag 'drm-fixes-2022-05-06' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A pretty quiet week, one fbdev, msm, kconfig, and two amdgpu fixes,
about what I'd expect for rc6.
fbdev:
- hotunplugging fix
amdgpu:
- Fix a xen dom0 regression on APUs
- Fix a potential array overflow if a receiver were to send an
erroneous audio channel count
msm:
- lockdep fix.
it6505:
- kconfig fix"
* tag 'drm-fixes-2022-05-06' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNT
drm/amdgpu: do not use passthrough mode in Xen dom0
drm/bridge: ite-it6505: add missing Kconfig option select
fbdev: Make fb_release() return -ENODEV if fbdev was unregistered
drm/msm/dp: remove fail safe mode related code
Puyou Lu [Fri, 6 May 2022 08:06:30 +0000 (16:06 +0800)]
gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set)
When one port's input state get inverted (eg. from low to hight) after
pca953x_irq_setup but before setting irq_mask (by some other driver such as
"gpio-keys"), the next inversion of this port (eg. from hight to low) will not
be triggered any more (because irq_stat is not updated at the first time). Issue
should be fixed after this commit.
Maximilian Luz [Fri, 29 Apr 2022 19:57:38 +0000 (21:57 +0200)]
platform/surface: aggregator: Fix initialization order when compiling as builtin module
When building the Surface Aggregator Module (SAM) core, registry, and
other SAM client drivers as builtin modules (=y), proper initialization
order is not guaranteed. Due to this, client driver registration
(triggered by device registration in the registry) races against bus
initialization in the core.
If any attempt is made at registering the device driver before the bus
has been initialized (i.e. if bus initialization fails this race) driver
registration will fail with a message similar to:
Driver surface_battery was unable to register with bus_type surface_aggregator because the bus was not initialized
Switch from module_init() to subsys_initcall() to resolve this issue.
Note that the serdev subsystem uses postcore_initcall() so we are still
able to safely register the serdev device driver for the core.
Fixes: 1dddf157a63b ("platform/surface: Add Surface Aggregator subsystem") Reported-by: Blaž Hrastnik <blaz@mxxn.io> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20220429195738.535751-1-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Maximilian Luz [Fri, 29 Apr 2022 18:00:49 +0000 (20:00 +0200)]
platform/surface: gpe: Add support for Surface Pro 8
The new Surface Pro 8 uses GPEs for lid events as well. Add an entry for
that so that the lid can be used to wake the device. Note that this is a
device with a keyboard type-cover, where this acts as the "lid".
The probe function, pmt_telem_probe(), adds an entry for devices even if
they have not been initialized. This results in the array of initialized
devices containing both initialized and uninitialized entries. This
causes a panic in the remove function, pmt_telem_remove() which expects
the array to only contain initialized entries.
Only use an entry when a device is initialized.
Cc: "David E. Box" <david.e.box@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: David Arcari <darcari@redhat.com> Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220429122322.2550003-1-prarit@redhat.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops
Lenovo laptops that contain NVME SSDs across a variety of generations have
trouble resuming from suspend to idle when the IOMMU translation layer is
active for the NVME storage device.
This generally manifests as a large resume delay or page faults. These
delays and page faults occur as a result of a Lenovo BIOS specific SMI
that runs during the D3->D0 transition on NVME devices.
This SMI occurs because of a flag that is set during resume by Lenovo
firmware:
Create a quirk that will run early in the resume process to prevent this
SMI from running. As any of these machines are fixed, they can be peeled
back from this quirk or narrowed down to individual firmware versions.
Kajol Jain [Thu, 5 May 2022 15:34:51 +0000 (21:04 +0530)]
powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks for string size which can panic the kernel, like incase
of overflow detection.
In papr_scm, papr_scm_pmu_check_events function uses stat->stat_id with
string operations, to populate the nvdimm_events_map array. Since
stat_id variable is not NULL terminated, the kernel panics with
CONFIG_FORTIFY_SOURCE enabled at boot time.
Below are the logs of kernel panic:
detected buffer overflow in __fortify_strlen
------------[ cut here ]------------
kernel BUG at lib/string_helpers.c:980!
Oops: Exception in kernel mode, sig: 5 [#1]
NIP [c00000000077dad0] fortify_panic+0x28/0x38
LR [c00000000077dacc] fortify_panic+0x24/0x38
Call Trace:
[c0000022d77836e0] [c00000000077dacc] fortify_panic+0x24/0x38 (unreliable)
[c00800000deb2660] papr_scm_pmu_check_events.constprop.0+0x118/0x220 [papr_scm]
[c00800000deb2cb0] papr_scm_probe+0x288/0x62c [papr_scm]
[c0000000009b46a8] platform_probe+0x98/0x150
Fix this issue by using kmemdup_nul() to copy the content of
stat->stat_id directly to the nvdimm_events_map array.
mpe: stat->stat_id comes from the hypervisor, not userspace, so there is
no security exposure.
Jan Höppner [Thu, 5 May 2022 14:17:32 +0000 (16:17 +0200)]
s390/dasd: Fix read inconsistency for ESE DASD devices
Read requests that return with NRF error are partially completed in
dasd_eckd_ese_read(). The function keeps track of the amount of
processed bytes and the driver will eventually return this information
back to the block layer for further processing via __dasd_cleanup_cqr()
when the request is in the final stage of processing (from the driver's
perspective).
For this, blk_update_request() is used which requires the number of
bytes to complete the request. As per documentation the nr_bytes
parameter is described as follows:
"number of bytes to complete for @req".
This was mistakenly interpreted as "number of bytes _left_ for @req"
leading to new requests with incorrect data length. The consequence are
inconsistent and completely wrong read requests as data from random
memory areas are read back.
Fix this by correctly specifying the amount of bytes that should be used
to complete the request.
Fixes: f39ab9169800 ("s390/dasd: fix data corruption for thin provisioned devices") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jan Höppner [Thu, 5 May 2022 14:17:31 +0000 (16:17 +0200)]
s390/dasd: Fix read for ESE with blksize < 4k
When reading unformatted tracks on ESE devices, the corresponding memory
areas are simply set to zero for each segment. This is done incorrectly
for blocksizes < 4096.
There are two problems. First, the increment of dst is done using the
counter of the loop (off), which is increased by blksize every
iteration. This leads to a much bigger increment for dst as actually
intended. Second, the increment of dst is done before the memory area
is set to 0, skipping a significant amount of bytes of memory.
This leads to illegal overwriting of memory and ultimately to a kernel
panic.
This is not a problem with 4k blocksize because
blk_queue_max_segment_size is set to PAGE_SIZE, always resulting in a
single iteration for the inner segment loop (bv.bv_len == blksize). The
incorrectly used 'off' value to increment dst is 0 and the correct
memory area is used.
In order to fix this for blksize < 4k, increment dst correctly using the
blksize and only do it at the end of the loop.
Fixes: 4f1230a997f0 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
s390/dasd: prevent double format of tracks for ESE devices
For ESE devices we get an error for write operations on an unformatted
track. Afterwards the track will be formatted and the IO operation
restarted.
When using alias devices a track might be accessed by multiple requests
simultaneously and there is a race window that a track gets formatted
twice resulting in data loss.
Prevent this by remembering the amount of formatted tracks when starting
a request and comparing this number before actually formatting a track
on the fly. If the number has changed there is a chance that the current
track was finally formatted in between. As a result do not format the
track and restart the current IO to check.
The number of formatted tracks does not match the overall number of
formatted tracks on the device and it might wrap around but this is no
problem. It is only needed to recognize that a track has been formatted at
all in between.
Fixes: 4f1230a997f0 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
For ESE devices we get an error when accessing an unformatted track.
The handling of this error will return zero data for read requests and
format the track on demand before writing to it. To do this the code needs
to distinguish between read and write requests. This is done with data from
the blocklayer request. A pointer to the blocklayer request is stored in
the CQR.
If there is an error on the device an ERP request is built to do error
recovery. While the ERP request is mostly a copy of the original CQR the
pointer to the blocklayer request is not copied to not accidentally pass
it back to the blocklayer without cleanup.
This leads to the error that during ESE handling after an ERP request was
built it is not possible to determine the IO direction. This leads to the
formatting of a track for read requests which might in turn lead to data
corruption.
Fixes: 4f1230a997f0 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Thu, 5 May 2022 23:52:15 +0000 (16:52 -0700)]
Merge tag 'folio-5.18f' of git://git.infradead.org/users/willy/pagecache
Pull folio fixes from Matthew Wilcox:
"Two folio fixes for 5.18.
Darrick and Brian have done amazing work debugging the race I created
in the folio BIO iterator. The readahead problem was deterministic, so
easy to fix.
- Fix a race when we were calling folio_next() in the BIO folio iter
without holding a reference, meaning the folio could be split or
freed, and we'd jump to the next page instead of the intended next
folio.
- Fix readahead creating single-page folios instead of the intended
large folios when doing reads that are not a power of two in size"
* tag 'folio-5.18f' of git://git.infradead.org/users/willy/pagecache:
mm/readahead: Fix readahead with large folios
block: Do not call folio_next() on an unreferenced folio
Linus Torvalds [Thu, 5 May 2022 22:50:27 +0000 (15:50 -0700)]
Merge tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
Filipe Manana [Tue, 3 May 2022 10:57:02 +0000 (11:57 +0100)]
btrfs: fix assertion failure when logging directory key range item
When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging
a directory, we don't expect the insertion to fail with -EEXIST, because
we are holding the directory's log_mutex and we have dropped all existing
BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log
the directory. However it's possible that during the logging we attempt
to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to
happen we need to race with insertions of items from other inodes in the
subvolume's tree while we are logging a directory. Here's how this can
happen:
1) We are logging a directory with inode number 1000 that has its items
spread across 3 leaves in the subvolume's tree:
leaf A - has index keys from the range 2 to 20 for example. The last
item in the leaf corresponds to a dir item for index number 20. All
these dir items were created in a past transaction.
leaf B - has index keys from the range 22 to 100 for example. It has
no keys from other inodes, all its keys are dir index keys for our
directory inode number 1000. Its first key is for the dir item with
a sequence number of 22. All these dir items were also created in a
past transaction.
leaf C - has index keys for our directory for the range 101 to 120 for
example. This leaf also has items from other inodes, and its first
item corresponds to the dir item for index number 101 for our directory
with inode number 1000;
2) When we finish processing the items from leaf A at log_dir_items(),
we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last
offset of 21, meaning the log is authoritative for the index range
from 21 to 21 (a single sequence number). At this point leaf B was
not yet modified in the current transaction;
3) When we return from log_dir_items() we have released our read lock on
leaf B, and have set *last_offset_ret to 21 (index number of the first
item on leaf B minus 1);
4) Some other task inserts an item for other inode (inode number 1001 for
example) into leaf C. That resulted in pushing some items from leaf C
into leaf B, in order to make room for the new item, so now leaf B
has dir index keys for the sequence number range from 22 to 102 and
leaf C has the dir items for the sequence number range 103 to 120;
5) At log_directory_changes() we call log_dir_items() again, passing it
a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3
plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0
of leaf B, since leaf B was modified in the current transaction.
We have also initialized 'last_old_dentry_offset' to 20 after calling
btrfs_previous_item() at log_dir_items(), as it left us at the last
item of leaf A, which refers to the dir item with sequence number 20;
6) We then call process_dir_items_leaf() to process the dir items of
leaf B, and when we process the first item, corresponding to slot 0,
sequence number 22, we notice the dir item was created in a past
transaction and its sequence number is greater than the value of
*last_old_dentry_offset + 1 (20 + 1), so we decide to log again a
BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range
of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST
error from insert_dir_log_key(), as we have already inserted that
key at step 2, triggering the assertion at process_dir_items_leaf().
The trace produced in dmesg is like the following:
Fix this by treating -EEXIST as expected at insert_dir_log_key() and have
it update the item with an end offset corresponding to the maximum between
the previously logged end offset and the new requested end offset. The end
offsets may be different due to dir index key deletions that happened as
part of unlink operations while we are logging a directory (triggered when
fsyncing some other inode parented by the directory) or during renames
which always attempt to log a single dir index deletion.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/YmyefE9mc2xl5ZMz@hungrycats.org/ Fixes: 4dec51e2764c0d ("btrfs: stop copying old dir items when logging a directory") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Naohiro Aota [Tue, 3 May 2022 21:10:05 +0000 (14:10 -0700)]
btrfs: zoned: activate block group properly on unlimited active zone device
btrfs_zone_activate() checks if it activated all the underlying zones in
the loop. However, that check never hit on an unlimited activate zone
device (max_active_zones == 0).
Fortunately, it still works without ENOSPC because btrfs_zone_activate()
returns true in the end, even if block_group->zone_is_active == 0. But, it
is confusing to have non zone_is_active block group still usable for
allocation. Also, we are wasting CPU time to iterate the loop every time
btrfs_zone_activate() is called for the blog groups.
Since error case in the loop is handled by out_unlock, we can just set
zone_is_active and do the list stuff after the loop.
Fixes: a7a0fc24224d ("btrfs: zoned: make zone activation multi stripe capable") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
Naohiro Aota [Tue, 3 May 2022 21:10:04 +0000 (14:10 -0700)]
btrfs: zoned: move non-changing condition check out of the loop
btrfs_zone_activate() checks if block_group->alloc_offset ==
block_group->zone_capacity every time it iterates the loop. But, it is
not depending on the index. Move out the check and do it only once.
Fixes: a7a0fc24224d ("btrfs: zoned: make zone activation multi stripe capable") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
btrfs: force v2 space cache usage for subpage mount
[BUG]
For a 4K sector sized btrfs with v1 cache enabled and only mounted on
systems with 4K page size, if it's mounted on subpage (64K page size)
systems, it can cause the following warning on v1 space cache:
BTRFS error (device dm-1): csum mismatch on free space cache
BTRFS warning (device dm-1): failed to load free space cache for block group 84082688, rebuilding it now
Although not a big deal, as kernel can rebuild it without problem, such
warning will bother end users, especially if they want to switch the
same btrfs seamlessly between different page sized systems.
[CAUSE]
V1 free space cache is still using fixed PAGE_SIZE for various bitmap,
like BITS_PER_BITMAP.
Such hard-coded PAGE_SIZE usage will cause various mismatch, from v1
cache size to checksum.
Thus kernel will always reject v1 cache with a different PAGE_SIZE with
csum mismatch.
[FIX]
Although we should fix v1 cache, it's already going to be marked
deprecated soon.
And we have v2 cache based on metadata (which is already fully subpage
compatible), and it has almost everything superior than v1 cache.
So just force subpage mount to use v2 cache on mount.
Linus Torvalds [Thu, 5 May 2022 17:38:11 +0000 (10:38 -0700)]
Merge tag 's390-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Disable -Warray-bounds warning for gcc12, since the only known way to
workaround false positive warnings on lowcore accesses would result
in worse code on fast paths.
- Avoid lockdep_assert_held() warning in kvm vm memop code.
- Reduce overhead within gmap_rmap code to get rid of long latencies
when e.g. shutting down 2nd level guests.
* tag 's390-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390: vsie/gmap: reduce gmap_rmap overhead
KVM: s390: Fix lockdep issue in vm memop
s390: disable -Warray-bounds
Linus Torvalds [Thu, 5 May 2022 16:45:12 +0000 (09:45 -0700)]
Merge tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, rxrpc and wireguard.
Previous releases - regressions:
- igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
- mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
- rds: acquire netns refcount on TCP sockets
- rxrpc: enable IPv6 checksums on transport socket
- nic: hinic: fix bug of wq out of bound access
- nic: thunder: don't use pci_irq_vector() in atomic context
- nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
flag
- nic: mlx5e:
- lag, fix use-after-free in fib event handler
- fix deadlock in sync reset flow
Previous releases - always broken:
- tcp: fix insufficient TCP source port randomness
- can: grcan: grcan_close(): fix deadlock
- nfc: reorder destructive operations in to avoid bugs
Misc:
- wireguard: improve selftests reliability"
* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
NFC: netlink: fix sleep in atomic bug when firmware download timeout
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: resalt the secret every 10 seconds
tcp: use different parts of the port_offset for index and offset
secure_seq: use the 64 bits of the siphash for port offset calculation
wireguard: selftests: set panic_on_warn=1 from cmdline
wireguard: selftests: bump package deps
wireguard: selftests: restore support for ccache
wireguard: selftests: use newer toolchains to fill out architectures
wireguard: selftests: limit parallelism to $(nproc) tests at once
wireguard: selftests: make routing loop test non-fatal
net/mlx5: Fix matching on inner TTC
net/mlx5: Avoid double clear or set of sync reset requested
net/mlx5: Fix deadlock in sync reset flow
net/mlx5e: Fix trust state reset in reload
net/mlx5e: Avoid checking offload capability in post_parse action
...
The fwnode of GPIO IRQ must be set to its own fwnode, not the fwnode of the
parent IRQ. Therefore, this sets own fwnode instead of the parent IRQ fwnode to
GPIO IRQ's.
Thomas Pfaff [Mon, 2 May 2022 11:28:29 +0000 (13:28 +0200)]
genirq: Synchronize interrupt thread startup
A kernel hang can be observed when running setserial in a loop on a kernel
with force threaded interrupts. The sequence of events is:
setserial
open("/dev/ttyXXX")
request_irq()
do_stuff()
-> serial interrupt
-> wake(irq_thread)
desc->threads_active++;
close()
free_irq()
kthread_stop(irq_thread)
synchronize_irq() <- hangs because desc->threads_active != 0
The thread is created in request_irq() and woken up, but does not get on a
CPU to reach the actual thread function, which would handle the pending
wake-up. kthread_stop() sets the should stop condition which makes the
thread immediately exit, which in turn leaves the stale threads_active
count around.
This problem was introduced with commit 4319830e9a12, which addressed a
interrupt sharing issue in the PCIe code.
Before that commit free_irq() invoked synchronize_irq(), which waits for
the hard interrupt handler and also for associated threads to complete.
To address the PCIe issue synchronize_irq() was replaced with
__synchronize_hardirq(), which only waits for the hard interrupt handler to
complete, but not for threaded handlers.
This was done under the assumption, that the interrupt thread already
reached the thread function and waits for a wake-up, which is guaranteed to
be handled before acting on the stop condition. The problematic case, that
the thread would not reach the thread function, was obviously overlooked.
Make sure that the interrupt thread is really started and reaches
thread_fn() before returning from __setup_irq().
This utilizes the existing wait queue in the interrupt descriptor. The
wait queue is unused for non-shared interrupts. For shared interrupts the
usage might cause a spurious wake-up of a waiter in synchronize_irq() or the
completion of a threaded handler might cause a spurious wake-up of the
waiter for the ready flag. Both are harmless and have no functional impact.
[ tglx: Amended changelog ]
Fixes: 4319830e9a12 ("genirq: Synchronize only with single thread on free_irq()") Signed-off-by: Thomas Pfaff <tpfaff@pcs.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/552fe7b4-9224-b183-bb87-a8f36d335690@pcs.com
Duoming Zhou [Wed, 4 May 2022 05:58:47 +0000 (13:58 +0800)]
NFC: netlink: fix sleep in atomic bug when firmware download timeout
There are sleep in atomic bug that could cause kernel panic during
firmware download process. The root cause is that nlmsg_new with
GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer
handler. The call trace is shown below:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
Call Trace:
kmem_cache_alloc_node
__alloc_skb
nfc_genl_fw_download_done
call_timer_fn
__run_timers.part.0
run_timer_softirq
__do_softirq
...
The nlmsg_new with GFP_KERNEL parameter may sleep during memory
allocation process, and the timer handler is run as the result of
a "software interrupt" that should not call any other function
that could sleep.
This patch changes allocation mode of netlink message from GFP_KERNEL
to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.
Fixes: 11314404620e ("NFC: Add firmware upload netlink command") Fixes: 2f80160a3f46 ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reading 100KB chunks from a big file (eg dd bs=100K) leads to poor
readahead behaviour. Studying the traces in detail, I noticed two
problems.
The first is that we were setting the readahead flag on the folio which
contains the last byte read from the block. This is wrong because we
will trigger readahead at the end of the read without waiting to see
if a subsequent read is going to use the pages we just read. Instead,
we need to set the readahead flag on the first folio _after_ the one
which contains the last byte that we're reading.
The second is that we were looking for the index of the folio with the
readahead flag set to exactly match the start + size - async_size.
If we've rounded this, either down (as previously) or up (as now),
we'll think we hit a folio marked as readahead by a different read,
and try to read the wrong pages. So round the expected index to the
order of the folio we hit.
Reported-by: Guo Xuenan <guoxuenan@huawei.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
block: Do not call folio_next() on an unreferenced folio
It is unsafe to call folio_next() on a folio unless you hold a reference
on it that prevents it from being split or freed. After returning
from the iterator, iomap calls folio_end_writeback() which may drop
the last reference to the page, or allow the page to be split. If that
happens, the iterator will not advance far enough through the bio_vec,
leading to assertion failures like the BUG() in folio_end_writeback()
that checks we're not trying to end writeback on a page not currently
under writeback. Other assertion failures were also seen, but they're
all explained by this one bug.
Fix the bug by remembering where the next folio starts before returning
from the iterator. There are other ways of fixing this bug, but this
seems the simplest.
Reported-by: Darrick J. Wong <djwong@kernel.org> Tested-by: Darrick J. Wong <djwong@kernel.org> Reported-by: Brian Foster <bfoster@redhat.com> Tested-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Vladimir Oltean [Tue, 3 May 2022 12:14:28 +0000 (15:14 +0300)]
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/
the default conform-exceed action is "reclassify", for a reason we don't
really understand.
The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.
Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.
Fixes: acd710a37c01 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
insufficient TCP source port randomness
In a not-yet published paper, Moshe Kol, Amit Klein, and Yossi Gilad
report being able to accurately identify a client by forcing it to emit
only 40 times more connections than the number of entries in the
table_perturb[] table, which is indexed by hashing the connection tuple.
The current 2^8 setting allows them to perform that attack with only 10k
connections, which is not hard to achieve in a few seconds.
Eric, Amit and I have been working on this for a few weeks now imagining,
testing and eliminating a number of approaches that Amit and his team were
still able to break or that were found to be too risky or too expensive,
and ended up with the simple improvements in this series that resists to
the attack, doesn't degrade the performance, and preserves a reliable port
selection algorithm to avoid connection failures, including the odd/even
port selection preference that allows bind() to always find a port quickly
even under strong connect() stress.
The approach relies on several factors:
- resalting the hash secret that's used to choose the table_perturb[]
entry every 10 seconds to eliminate slow attacks and force the
attacker to forget everything that was learned after this delay.
This already eliminates most of the problem because if a client
stays silent for more than 10 seconds there's no link between the
previous and the next patterns, and 10s isn't yet frequent enough
to cause too frequent repetition of a same port that may induce a
connection failure ;
- adding small random increments to the source port. Previously, a
random 0 or 1 was added every 16 ports. Now a random 0 to 7 is
added after each port. This means that with the default 32768-60999
range, a worst case rollover happens after 1764 connections, and
an average of 3137. This doesn't stop statistical attacks but
requires significantly more iterations of the same attack to
confirm a guess.
- increasing the table_perturb[] size from 2^8 to 2^16, which Amit
says will require 2.6 million connections to be attacked with the
changes above, making it pointless to get a fingerprint that will
only last 10 seconds. Due to the size, the table was made dynamic.
- a few minor improvements on the bits used from the hash, to eliminate
some unfortunate correlations that may possibly have been exploited
to design future attack models.
These changes were tested under the most extreme conditions, up to
1.1 million connections per second to one and a few targets, showing no
performance regression, and only 2 connection failures within 13 billion,
which is less than 2^-32 and perfectly within usual values.
The series is split into small reviewable changes and was already reviewed
by Amit and Eric.
====================
Willy Tarreau [Mon, 2 May 2022 08:46:14 +0000 (10:46 +0200)]
tcp: drop the hash_32() part from the index calculation
In commit 3617231da78f ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.
Suggested-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:13 +0000 (10:46 +0200)]
tcp: increase source port perturb table to 2^16
Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.
Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.
A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il> Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Reported-by: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:12 +0000 (10:46 +0200)]
tcp: dynamically allocate the perturb table used by source ports
We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:11 +0000 (10:46 +0200)]
tcp: add small random increments to the source port
Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.
With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Mon, 2 May 2022 08:46:10 +0000 (10:46 +0200)]
tcp: resalt the secret every 10 seconds
In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:09 +0000 (10:46 +0200)]
tcp: use different parts of the port_offset for index and offset
Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.
Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willy Tarreau [Mon, 2 May 2022 08:46:08 +0000 (10:46 +0200)]
secure_seq: use the 64 bits of the siphash for port offset calculation
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit a9e41f2b5ba4 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Moshe Kol <moshe.kol@mail.huji.ac.il> Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il> Cc: Amit Klein <aksecurity@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 5 May 2022 00:50:00 +0000 (17:50 -0700)]
Merge branch 'wireguard-patches-for-5-18-rc6'
Jason A. Donenfeld says:
====================
wireguard patches for 5.18-rc6
In working on some other problems, I wound up leaning on the WireGuard
CI more than usual and uncovered a few small issues with reliability.
These are fairly low key changes, since they don't impact kernel code
itself.
One change does stick out in particular, though, which is the "make
routing loop test non-fatal" commit. I'm not thrilled about doing this,
but currently [1] remains unsolved, and I'm still working on a real
solution to that (hopefully for 5.19 or 5.20 if I can come up with a
good idea...), so for now that test just prints a big red warning
instead.
wireguard: selftests: set panic_on_warn=1 from cmdline
Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: selftests: use newer toolchains to fill out architectures
Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.
Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: selftests: limit parallelism to $(nproc) tests at once
The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wireguard: selftests: make routing loop test non-fatal
I hate to do this, but I still do not have a good solution to actually
fix this bug across architectures. So just disable it for now, so that
the CI can still deliver actionable results. This commit adds a large
red warning, so that at least the failure isn't lost forever, and
hopefully this can be revisited down the line.
Thomas Gleixner [Sun, 1 May 2022 19:31:43 +0000 (21:31 +0200)]
x86/fpu: Prevent FPU state corruption
The FPU usage related to task FPU management is either protected by
disabling interrupts (switch_to, return to user) or via fpregs_lock() which
is a wrapper around local_bh_disable(). When kernel code wants to use the
FPU then it has to check whether it is possible by calling irq_fpu_usable().
But the condition in irq_fpu_usable() is wrong. It allows FPU to be used
when:
The latter is checking whether some other context already uses FPU in the
kernel, but if that's not the case then it allows FPU to be used
unconditionally even if the calling context interrupted a fpregs_lock()
critical region. If that happens then the FPU state of the interrupted
context becomes corrupted.
Allow in kernel FPU usage only when no other context has in kernel FPU
usage and either the calling context is not hard interrupt context or the
hard interrupt did not interrupt a local bottomhalf disabled region.
It's hard to find a proper Fixes tag as the condition was broken in one way
or the other for a very long time and the eager/lazy FPU changes caused a
lot of churn. Picked something remotely connected from the history.
This survived undetected for quite some time as FPU usage in interrupt
context is rare, but the recent changes to the random code unearthed it at
least on a kernel which had FPU debugging enabled. There is probably a
higher rate of silent corruption as not all issues can be detected by the
FPU debugging code. This will be addressed in a subsequent change.
Fixes: 0eb93e621380 ("x86, fpu: decouple non-lazy/eager fpu restore from xsave") Reported-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220501193102.588689270@linutronix.de
Bob Pearson [Wed, 4 May 2022 20:28:17 +0000 (15:28 -0500)]
RDMA/rxe: Change mcg_lock to a _bh lock
rxe_mcast.c currently uses _irqsave spinlocks for rxe->mcg_lock while
rxe_recv.c uses _bh spinlocks for the same lock.
As there is no case where the mcg_lock can be taken from an IRQ, change
these all to bh locks so we don't have confusing mismatched lock types on
the same spinlock.
RDMA/siw: Fix a condition race issue in MPA request processing
The calling of siw_cm_upcall and detaching new_cep with its listen_cep
should be atomistic semantics. Otherwise siw_reject may be called in a
temporary state, e,g, siw_cm_upcall is called but the new_cep->listen_cep
has not being cleared.
Rob Herring [Tue, 3 May 2022 16:27:38 +0000 (11:27 -0500)]
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
Another round of removing redundant minItems/maxItems when 'items' list is
specified. This time it is in if/then schemas as the meta-schema was
failing to check this case.
If a property has an 'items' list, then a 'minItems' or 'maxItems' with the
same size as the list is redundant and can be dropped. Note that is DT
schema specific behavior and not standard json-schema behavior. The tooling
will fixup the final schema adding any unspecified minItems/maxItems.
Signed-off-by: Rob Herring <robh@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Link: https://lore.kernel.org/r/20220503162738.3827041-1-robh@kernel.org
Rob Herring [Fri, 29 Apr 2022 19:46:11 +0000 (14:46 -0500)]
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
A few platforms, at91 and tegra, use drive-push-pull and
drive-open-drain with a 0 or 1 value. There's not really a need for values
as '1' should be equivalent to no value (it wasn't treated that way) and
drive-push-pull disabled is equivalent to drive-open-drain. So dropping the
value can't be done without breaking existing OSs. As we don't want new
cases, mark the case with values as deprecated.
Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220429194610.2741437-1-robh@kernel.org
Linus Torvalds [Wed, 4 May 2022 18:04:52 +0000 (11:04 -0700)]
Merge tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"IOMMU core:
- Fix for a regression which could cause NULL-ptr dereferences
Arm SMMU:
- Fix off-by-one in SMMUv3 SVA TLB invalidation
- Disable large mappings to workaround nvidia erratum
Intel VT-d:
- Handle PCI stop marker messages in IOMMU driver to meet the
requirement of I/O page fault handling framework.
- Calculate a feasible mask for non-aligned page-selective IOTLB
invalidation.
Apple DART IOMMU:
- Fix potential NULL-ptr dereference
- Set module owner"
* tag 'iomm-fixes-v5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Make sysfs robust for non-API groups
iommu/dart: Add missing module owner to ops structure
iommu/dart: check return value after calling platform_get_resource()
iommu/vt-d: Drop stop marker messages
iommu/vt-d: Calculate mask for non-aligned flushes
iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu
iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
projects / kernel.git / log