The commit message introducing the global memzero_page explicitly
mentions switching to kmap_local_page in the commit log but doesn't
actually do that.
Link: https://lkml.kernel.org/r/20210713055231.137602-3-hch@lst.de Fixes: 28961998f858 ("iov_iter: lift memzero_page() to highmem.h") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
memcpy_to_page and memzero_page can write to arbitrary pages, which
could be in the page cache or in high memory, so call
flush_kernel_dcache_pages to flush the dcache.
This is a problem when using these helpers on dcache challeneged
architectures. Right now there are just a few users, chances are no one
used the PC floppy driver, the aha1542 driver for an ISA SCSI HBA, and a
few advanced and optional btrfs and ext4 features on those platforms yet
since the conversion.
Link: https://lkml.kernel.org/r/20210713055231.137602-2-hch@lst.de Fixes: bb90d4bc7b6a ("mm/highmem: Lift memcpy_[to|from]_page to core") Fixes: 28961998f858 ("iov_iter: lift memzero_page() to highmem.h") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allocation requests outside ZONE_NORMAL (MOVABLE, HIGHMEM or DMA) cannot
be fulfilled by KFENCE, because KFENCE memory pool is located in a zone
different from the requested one.
Because callers of kmem_cache_alloc() may actually rely on the
allocation to reside in the requested zone (e.g. memory allocations
done with __GFP_DMA must be DMAable), skip all allocations done with
GFP_ZONEMASK and/or respective SLAB flags (SLAB_CACHE_DMA and
SLAB_CACHE_DMA32).
kfence: defer kfence_test_init to ensure that kunit debugfs is created
kfence_test_init and kunit_init both use the same level late_initcall,
which means if kfence_test_init linked ahead of kunit_init,
kfence_test_init will get a NULL debugfs_rootdir as parent dentry, then
kfence_test_init and kfence_debugfs_init both create a debugfs node
named "kfence" under debugfs_mount->mnt_root, and it will throw out
"debugfs: Directory 'kfence' with parent '/' already present!" with
EEXIST. So kfence_test_init should be deferred.
Link: https://lkml.kernel.org/r/20210714113140.2949995-1-o451686892@gmail.com Signed-off-by: Weizhao Ouyang <o451686892@gmail.com> Tested-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
selftest: use mmap instead of posix_memalign to allocate memory
This test passes pointers obtained from anon_allocate_area to the
userfaultfd and mremap APIs. This causes a problem if the system
allocator returns tagged pointers because with the tagged address ABI
the kernel rejects tagged addresses passed to these APIs, which would
end up causing the test to fail. To make this test compatible with such
system allocators, stop using the system allocator to allocate memory in
anon_allocate_area, and instead just use mmap.
Patch series "userfaultfd: do not untag user pointers", v5.
If a user program uses userfaultfd on ranges of heap memory, it may end
up passing a tagged pointer to the kernel in the range.start field of
the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable
allocator, or on Android if using the Tagged Pointers feature for MTE
readiness [1].
When a fault subsequently occurs, the tag is stripped from the fault
address returned to the application in the fault.address field of struct
uffd_msg. However, from the application's perspective, the tagged
address *is* the memory address, so if the application is unaware of
memory tags, it may get confused by receiving an address that is, from
its point of view, outside of the bounds of the allocation. We observed
this behavior in the kselftest for userfaultfd [2] but other
applications could have the same problem.
Address this by not untagging pointers passed to the userfaultfd ioctls.
Instead, let the system call fail. Also change the kselftest to use
mmap so that it doesn't encounter this problem.
Do not untag pointers passed to the userfaultfd ioctls. Instead, let
the system call fail. This will provide an early indication of problems
with tag-unaware userspace code instead of letting the code get confused
later, and is consistent with how we decided to handle brk/mmap/mremap
in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in
brk()/mmap()/mremap()"), as well as being consistent with the existing
tagged address ABI documentation relating to how ioctl arguments are
handled.
The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag
user pointers") plus some fixups to some additional calls to
validate_range that have appeared since then.
Merge tag 'ceph-for-5.14-rc3' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A subtle deadlock on lock_rwsem (marked for stable) and rbd fixes for
a -rc1 regression.
Also included a rare WARN condition tweak"
* tag 'ceph-for-5.14-rc3' of git://github.com/ceph/ceph-client:
rbd: resurrect setting of disk->private_data in rbd_init_disk()
ceph: don't WARN if we're still opening a session to an MDS
rbd: don't hold lock_rwsem while running_list is being drained
rbd: always kick acquire on "acquired" and "released" notifications
Merge tag 'trace-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix deadloop in ring buffer because of using stale "read" variable
- Fix synthetic event use of field_pos as boolean and not an index
- Fixed histogram special var "cpu" overriding event fields called
"cpu"
- Cleaned up error prone logic in alloc_synth_event()
- Removed call to synchronize_rcu_tasks_rude() when not needed
- Removed redundant initialization of a local variable "ret"
- Fixed kernel crash when updating tracepoint callbacks of different
priorities.
* tag 'trace-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoints: Update static_call before tp_funcs when adding a tracepoint
ftrace: Remove redundant initialization of variable ret
ftrace: Avoid synchronize_rcu_tasks_rude() call when not necessary
tracing: Clean up alloc_synth_event()
tracing/histogram: Rename "cpu" to "common_cpu"
tracing: Synthetic event field_pos is an index not a boolean
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
Merge tag 'acpi-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a recently broken Kconfig dependency and ACPI device
reference counting in an iterator macro.
Specifics:
- Fix recently broken Kconfig dependency for the ACPI table override
via built-in initrd (Robert Richter)
- Fix ACPI device reference counting in the for_each_acpi_dev_match()
helper macro to avoid use-after-free (Andy Shevchenko)"
* tag 'acpi-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: utils: Fix reference counting in for_each_acpi_dev_match()
ACPI: Kconfig: Fix table override from built-in initrd
Merge tag 'driver-core-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small driver core fixes to resolve some reported problems
for 5.14-rc3. They include:
- aux bus memory leak fix
- unneeded warning message removed when removing a device link.
Both have been in linux-next with no reported problems"
* tag 'driver-core-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Prevent warning when removing a device link from unregistered consumer
driver core: auxiliary bus: Fix memory leak when driver_register() fail
Merge tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.14-rc3.
Included in here are:
- MAINTAINERS file updates for two changes in different driver
subsystems
- mhi bus bugfixes
- nds32 bugfix that resolves a reported problem
All have been in linux-next with no reported problems"
* tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nds32: fix up stack guard gap
MAINTAINERS: Change ACRN HSM driver maintainer
MAINTAINERS: Update for VMCI driver
bus: mhi: pci_generic: Fix inbound IPCR channel
bus: mhi: core: Validate channel ID when processing command completions
bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean
Merge tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes for 5.14-rc3 to resolve a bunch of tiny
problems reported. Included in here are:
- dtsi revert to resolve a problem which broke android systems that
relied on the dts name to find the USB controller device.
People are still working out the "real" solution for this, but for
now the revert is needed.
- core USB fix for pipe calculation found by syzbot
- typec fixes
- gadget driver fixes
- new usb-serial device ids
- new USB quirks
- xhci fixes
- usb hub fixes for power management issues reported
- other tiny fixes
All have been in linux-next with no reported problems"
* tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits)
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem"
usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set
Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name"
usb: dwc2: gadget: Fix sending zero length packet in DDMA mode.
usb: dwc2: Skip clock gating on Samsung SoCs
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode.
usb: phy: Fix page fault from usb_phy_uevent
usb: xhci: avoid renesas_usb_fw.mem when it's unusable
usb: gadget: u_serial: remove WARN_ON on null port
usb: dwc3: avoid NULL access of usb_gadget_driver
usb: max-3421: Prevent corruption of freed memory
usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe
MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970
usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes
usb: typec: stusb160x: register role switch before interrupt registration
USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS
usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI
usb: hub: Disable USB 3 device initiated lpm if exit latency is too high
...
Merge tag 'sound-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, mostly covering device-specific
regressions and bugs over ASoC, HD-audio and USB-audio, while
the ALSA PCM core received a few additional fixes for the
possible (new and old) regressions"
* tag 'sound-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (29 commits)
ALSA: usb-audio: Add registration quirk for JBL Quantum headsets
ALSA: hda/hdmi: Add quirk to force pin connectivity on NUC10
ALSA: pcm: Fix mmap without buffer preallocation
ALSA: pcm: Fix mmap capability check
ALSA: hda: intel-dsp-cfg: add missing ElkhartLake PCI ID
ASoC: ti: j721e-evm: Check for not initialized parent_clk_id
ASoC: ti: j721e-evm: Fix unbalanced domain activity tracking during startup
ALSA: hda/realtek: Fix pop noise and 2 Front Mic issues on a machine
ALSA: hdmi: Expose all pins on MSI MS-7C94 board
ALSA: sb: Fix potential ABBA deadlock in CSP driver
ASoC: rt5682: Fix the issue of garbled recording after powerd_dbus_suspend
ASoC: amd: reverse stop sequence for stoneyridge platform
ASoC: soc-pcm: add a flag to reverse the stop sequence
ASoC: codecs: wcd938x: setup irq during component bind
ASoC: dt-bindings: renesas: rsnd: Fix incorrect 'port' regex schema
ALSA: usb-audio: Add missing proc text entry for BESPOKEN type
ASoC: codecs: wcd938x: make sdw dependency explicit in Kconfig
ASoC: SOF: Intel: Update ADL descriptor to use ACPI power states
ASoC: rt5631: Fix regcache sync errors on resume
ALSA: pcm: Call substream ack() method upon compat mmap commit
...
tracepoints: Update static_call before tp_funcs when adding a tracepoint
Because of the significant overhead that retpolines pose on indirect
calls, the tracepoint code was updated to use the new "static_calls" that
can modify the running code to directly call a function instead of using
an indirect caller, and this function can be changed at runtime.
In the tracepoint code that calls all the registered callbacks that are
attached to a tracepoint, the following is done:
If there's just a single callback, the static_call is updated to just call
that callback directly. Once another handler is added, then the static
caller is updated to call the iterator, that simply loops over all the
funcs in the array and calls each of the callbacks like the old method
using indirect calling.
The issue was discovered with a race between updating the funcs array and
updating the static_call. The funcs array was updated first and then the
static_call was updated. This is not an issue as long as the first element
in the old array is the same as the first element in the new array. But
that assumption is incorrect, because callbacks also have a priority
field, and if there's a callback added that has a higher priority than the
callback on the old array, then it will become the first callback in the
new array. This means that it is possible to call the old callback with
the new callback data element, which can cause a kernel panic.
static_call = callback1()
funcs[] = {callback1,data1};
callback2 has higher priority than callback1
CPU 1 CPU 2
----- -----
new_funcs = {callback2,data2},
{callback1,data1}
rcu_assign_pointer(tp->funcs, new_funcs);
/*
* Now tp->funcs has the new array
* but the static_call still calls callback1
*/
/* Now callback1 is called with
* callback2's data */
[ KERNEL PANIC ]
update_static_call(iterator);
To prevent this from happening, always switch the static_call to the
iterator before assigning the tp->funcs to the new array. The iterator will
always properly match the callback with its data.
To trigger this bug:
In one terminal:
while :; do hackbench 50; done
In another terminal
echo 1 > /sys/kernel/tracing/events/sched/sched_waking/enable
while :; do
echo 1 > /sys/kernel/tracing/set_event_pid;
sleep 0.5
echo 0 > /sys/kernel/tracing/set_event_pid;
sleep 0.5
done
And it doesn't take long to crash. This is because the set_event_pid adds
a callback to the sched_waking tracepoint with a high priority, which will
be called before the sched_waking trace event callback is called.
Note, the removal to a single callback updates the array first, before
changing the static_call to single callback, which is the proper order as
the first element in the array is the same as what the static_call is
being changed to.
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Fixes: d25e37d89dd2f ("tracepoint: Optimize using static_call()") Reported-by: Stefan Metzmacher <metze@samba.org>
tested-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
ftrace: Avoid synchronize_rcu_tasks_rude() call when not necessary
synchronize_rcu_tasks_rude() triggers IPIs and forces rescheduling on
all CPUs. It is a costly operation and, when targeting nohz_full CPUs,
very disrupting (hence the name). So avoid calling it when 'old_hash'
doesn't need to be freed.
Currently the histogram logic allows the user to write "cpu" in as an
event field, and it will record the CPU that the event happened on.
The problem with this is that there's a lot of events that have "cpu"
as a real field, and using "cpu" as the CPU it ran on, makes it
impossible to run histograms on the "cpu" field of events.
For example, if I want to have a histogram on the count of the
workqueue_queue_work event on its cpu field, running:
Change the command to "common_cpu" as no event should have "common_*"
fields as that's a reserved name for fields used by all events. And
this makes sense here as common_cpu would be a field used by all events.
Now we can even do:
># echo 'hist:keys=common_cpu,cpu if cpu < 100' > events/workqueue/workqueue_queue_work/trigger
># cat events/workqueue/workqueue_queue_work/hist
# event histogram
#
# trigger info: hist:keys=common_cpu,cpu:vals=hitcount:sort=hitcount:size=2048 if cpu < 100 [active]
#
Now for backward compatibility, I added a trick. If "cpu" is used, and
the field is not found, it will fall back to "common_cpu" and work as
it did before. This way, it will still work for old programs that use
"cpu" to get the actual CPU, but if the event has a "cpu" as a field, it
will get that event's "cpu" field, which is probably what it wants
anyway.
I updated the tracefs/README to include documentation about both the
common_timestamp and the common_cpu. This way, if that text is present in
the README, then an application can know that common_cpu is supported over
just plain "cpu".
Link: https://lkml.kernel.org/r/20210721110053.26b4f641@oasis.local.home Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: 8b7622bf94a44 ("tracing: Add cpu field for hist triggers") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The reason is that the dynamic events array keeps track of the field
position of the fields array, via the field_pos variable in the
synth_field structure. Unfortunately, that field is a boolean for some
reason, which means any field_pos greater than 1 will be a bug (in this
case it was 2).
Link: https://lkml.kernel.org/r/20210721191008.638bce34@oasis.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: bd82631d7ccdc ("tracing: Add support for dynamic strings to synthetic events") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Merge tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular fixes - a bunch of amdgpu fixes are the main thing mostly for
the new gpus. There is also some i915 reverts for older changes that
were having some unwanted side effects. One nouveau fix for a report
regressions, and otherwise just some misc fixes.
* tag 'drm-fixes-2021-07-23' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/panel: raspberrypi-touchscreen: Prevent double-free
drm/amdgpu - Corrected the video codecs array name for yellow carp
drm/amd/display: Fix ASSR regression on embedded panels
drm/amdgpu: add yellow carp pci id (v2)
drm/amdgpu: update yellow carp external rev_id handling
drm/amd/pm: Support board calibration on aldebaran
drm/amd/display: change zstate allow msg condition
drm/amd/display: Populate dtbclk entries for dcn3.02/3.03
drm/amd/display: Line Buffer changes
drm/amd/display: Remove MALL function from DCN3.1
drm/amd/display: Only set default brightness for OLED
drm/amd/display: Update bounding box for DCN3.1
drm/amd/display: Query VCO frequency from register for DCN3.1
drm/amd/display: Populate socclk entries for dcn3.02/3.03
drm/amd/display: Fix max vstartup calculation for modes with borders
drm/amd/display: implement workaround for riommu related hang
drm/amd/display: Fix comparison error in dcn21 DML
drm/i915: Correct the docs for intel_engine_cmd_parser
drm/ttm: add missing NULL checks
drm/ttm: Force re-init if ttm_global_init() fails
...
Merge tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fix from Gustavo Silva:
"Fix a fall-through warning when building with -Wimplicit-fallthrough
on PowerPC"
* tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
powerpc/pasemi: Fix fall-through warning for Clang
Dave Airlie [Fri, 23 Jul 2021 00:43:37 +0000 (10:43 +1000)]
Merge tag 'drm-intel-fixes-2021-07-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Couple reverts from Jason getting rid of asynchronous command parsing
and fence error propagation and a GVT fix of shadow ppgtt invalidation
with proper D3 state tracking from Colin.
Merge tag 'array-bounds-fixes-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull array bounds warning fix from Gustavo Silva:
"Fix a couple of out-of-bounds warnings in the media subsystem.
This is part of the ongoing efforts to globally enable -Warray-bounds"
* tag 'array-bounds-fixes-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
media: ngene: Fix out-of-bounds bug in ngene_command_config_free_buf()
Merge tag 'usb-serial-5.14-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.14-rc3
Here are some new device ids and a device-id comment fix.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.14-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
USB: serial: cp210x: fix comments for GE CS1000
USB: serial: option: add support for u-blox LARA-R6 family
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"A pair of arm64 fixes for -rc3. The straightforward one is a fix to
our firmware calling stub, which accidentally started corrupting the
link register on machines with SVE. Since these machines don't really
exist yet, it wasn't spotted in -next.
The other fix is a revert-and-a-bit of a patch originally intended to
allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A
side-effect of this change was that our pXd_set_huge() implementations
could be replaced with generic dummy functions depending on the levels
of page-table being used, which in turn broke the boot if we fail to
create the linear mapping as a result of using these functions to
operate on the pgd. Huge thanks to Michael Ellerman for modifying the
revert so as not to regress PPC 8xx in terms of functionality.
Anyway, that's the background and it's also available in the commit
message along with Link tags pointing at all of the fun.
Summary:
- Fix hang when issuing SMC on SVE-capable system due to
clobbered LR
- Fix boot failure due to missing block mappings with folded
page-table"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge"
arm64: smccc: Save lr before calling __arm_smccc_sve_check()
Merge tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- bug fix from Haiyang for vmbus CPU assignment
- revert of a bogus patch that went into 5.14-rc1
* tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Revert "x86/hyperv: fix logical processor creation"
Drivers: hv: vmbus: Fix duplicate CPU assignments within a device
1) Fix type of bind option flag in af_xdp, from Baruch Siach.
2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao.
3) PM refcnt imbakance in r8152, from Takashi Iwai.
4) Sign extension ug in liquidio, from Colin Ian King.
5) Mising range check in s390 bpf jit, from Colin Ian King.
6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan.
7) Fix skb page recycling race, from Ilias Apalodimas.
8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin.
9) netrom timer sk refcnt issues, from Nguyen Dinh Phi.
10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric
Dumazet.
11) act_skbmod should only operate on ethernet packets, from Peilin Ye.
12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo
Abeni.
13) Fix sparx5 dependencies, from Yajun Deng.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
dpaa2-switch: seed the buffer pool after allocating the swp
net: sched: cls_api: Fix the the wrong parameter
net: sparx5: fix unmet dependencies warning
net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
net: dsa: ensure linearized SKBs in case of tail taggers
ravb: Remove extra TAB
ravb: Fix a typo in comment
net: dsa: sja1105: make VID 4095 a bridge VLAN too
tcp: disable TFO blackhole logic by default
sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
net: ixp46x: fix ptp build failure
ibmvnic: Remove the proper scrq flush
selftests: net: add ESP-in-UDP PMTU test
udp: check encap socket in __udp_lib_err
sctp: update active_key for asoc when old key is being replaced
r8169: Avoid duplicate sysfs entry creation error
ixgbe: Fix packet corruption due to missing DMA sync
Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()"
ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions
fsl/fman: Add fibre support
...
Merge tag 'mmc-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Use kref to fix KASAN splats triggered during card removal
- Don't allocate IDA for OF aliases
* tag 'mmc-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Don't allocate IDA for OF aliases
mmc: core: Use kref in place of struct mmc_blk_data::usage
Haoran Luo [Wed, 21 Jul 2021 14:12:07 +0000 (14:12 +0000)]
tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.
The "rb_per_cpu_empty()" misinterpret the condition (as not-empty) when
"head_page" and "commit_page" of "struct ring_buffer_per_cpu" points to
the same buffer page, whose "buffer_data_page" is empty and "read" field
is non-zero.
An error scenario could be constructed as followed (kernel perspective):
1. All pages in the buffer has been accessed by reader(s) so that all of
them will have non-zero "read" field.
2. Read and clear all buffer pages so that "rb_num_of_entries()" will
return 0 rendering there's no more data to read. It is also required
that the "read_page", "commit_page" and "tail_page" points to the same
page, while "head_page" is the next page of them.
3. Invoke "ring_buffer_lock_reserve()" with large enough "length"
so that it shot pass the end of current tail buffer page. Now the
"head_page", "commit_page" and "tail_page" points to the same page.
4. Discard current event with "ring_buffer_discard_commit()", so that
"head_page", "commit_page" and "tail_page" points to a page whose buffer
data page is now empty.
When the error scenario has been constructed, "tracing_read_pipe" will
be trapped inside a deadloop: "trace_empty()" returns 0 since
"rb_per_cpu_empty()" returns 0 when it hits the CPU containing such
constructed ring buffer. Then "trace_find_next_entry_inc()" always
return NULL since "rb_num_of_entries()" reports there's no more entry
to read. Finally "trace_seq_to_user()" returns "-EBUSY" spanking
"tracing_read_pipe" back to the start of the "waitagain" loop.
I've also written a proof-of-concept script to construct the scenario
and trigger the bug automatically, you can use it to trace and validate
my reasoning above:
Tests has been carried out on linux kernel 5.14-rc2
(2734d6c1b1a089fb593ef6a23d4b70903526fe0c), my fixed version
of kernel (for testing whether my update fixes the bug) and
some older kernels (for range of affected kernels). Test result is
also attached to the proof-of-concept repository.
dpaa2-switch: seed the buffer pool after allocating the swp
Any interraction with the buffer pool (seeding a buffer, acquire one) is
made through a software portal (SWP, a DPIO object).
There are circumstances where the dpaa2-switch driver probes on a DPSW
before any DPIO devices have been probed. In this case, seeding of the
buffer pool will lead to a panic since no SWPs are initialized.
To fix this, seed the buffer pool after making sure that the software
portals have been probed and are ready to be used.
Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yajun Deng [Thu, 22 Jul 2021 03:23:43 +0000 (11:23 +0800)]
net: sched: cls_api: Fix the the wrong parameter
The 4th parameter in tc_chain_notify() should be flags rather than seq.
Let's change it back correctly.
Fixes: 32a4f5ecd738 ("net: sched: introduce chain object to uapi") Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
Randy Dunlap [Wed, 21 Jul 2021 22:33:36 +0000 (15:33 -0700)]
net: sparx5: fix unmet dependencies warning
WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=y] && HAS_IOMEM [=y]
Selected by [y]:
- SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] && OF [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Tsoy [Wed, 21 Jul 2021 23:56:05 +0000 (02:56 +0300)]
ALSA: usb-audio: Add registration quirk for JBL Quantum headsets
These devices has two interfaces, but only the second interface
contains the capture endpoint, thus quirk is required to delay the
registration until the second interface appears.
David S. Miller [Thu, 22 Jul 2021 06:15:06 +0000 (23:15 -0700)]
Merge branch 'ksz-dsa-fixes'
Lino Sanfilippo says:
====================
Fixes for KSZ DSA switch
These patches fix issues I encountered while using a KSZ9897 as a DSA
switch with a broadcom GENET network device as the DSA master device.
PATCH 1 fixes an invalid access to an SKB in case it is scattered.
PATCH 2 fixes incorrect hardware checksum calculation caused by the DSA
tag.
Changes in v2:
- instead of linearizing the SKBs only for KSZ switches ensure linearized
SKBs for all tail taggers by clearing the feature flags NETIF_F_HW_SG and
NETIF_F_FRAGLIST (suggested by Vladimir Oltean)
The patches have been tested with a KSZ9897 and apply against net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum
If the checksum calculation is offloaded to the network device (e.g due to
NETIF_F_HW_CSUM inherited from the DSA master device), the calculated
layer 4 checksum is incorrect. This is since the DSA tag which is placed
after the layer 4 data is considered as being part of the daa and thus
errorneously included into the checksum calculation.
To avoid this, always calculate the layer 4 checksum in software.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: ensure linearized SKBs in case of tail taggers
The function skb_put() that is used by tail taggers to make room for the
DSA tag must only be called for linearized SKBS. However in case that the
slave device inherited features like NETIF_F_HW_SG or NETIF_F_FRAGLIST the
SKB passed to the slaves transmit function may not be linearized.
Avoid those SKBs by clearing the NETIF_F_HW_SG and NETIF_F_FRAGLIST flags
for tail taggers.
Furthermore since the tagging protocol can be changed at runtime move the
code for setting up the slaves features into dsa_slave_setup_tagger().
Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Biju Das [Wed, 21 Jul 2021 18:21:26 +0000 (19:21 +0100)]
ravb: Remove extra TAB
Align the member description comments for struct ravb_desc by
removing the extra TAB.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Biju Das [Wed, 21 Jul 2021 18:17:21 +0000 (19:17 +0100)]
ravb: Fix a typo in comment
Fix the typo RX->TX in comment, as the code following the comment
process TX and not RX.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 21 Jul 2021 12:37:59 +0000 (15:37 +0300)]
net: dsa: sja1105: make VID 4095 a bridge VLAN too
This simple series of commands:
ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
fails on sja1105 with the following error:
[ 33.439103] sja1105 spi0.1: vlan-lookup-table needs to have at least the default untagged VLAN
[ 33.447710] sja1105 spi0.1: Invalid config, cannot upload
Warning: sja1105: Failed to change VLAN Ethertype.
For context, sja1105 has 3 operating modes:
- SJA1105_VLAN_UNAWARE: the dsa_8021q_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_FULL: the bridge_vlans are committed to hardware
- SJA1105_VLAN_FILTERING_BEST_EFFORT: both the dsa_8021q_vlans and the
bridge_vlans are committed to hardware
Swapping out a VLAN list and another in happens in
sja1105_build_vlan_table(), which performs a delta update procedure.
That function is called from a few places, notably from
sja1105_vlan_filtering() which is called from the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler.
The above set of 2 commands fails when run on a kernel pre-commit 8841f6e63f2c ("net: dsa: sja1105: make devlink property
best_effort_vlan_filtering true by default"). So the priv->vlan_state
transition that takes place is between VLAN-unaware and full VLAN
filtering. So the dsa_8021q_vlans are swapped out and the bridge_vlans
are swapped in.
So why does it fail?
Well, the bridge driver, through nbp_vlan_init(), first sets up the
SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING attribute, and only then
proceeds to call nbp_vlan_add for the default_pvid.
So when we swap out the dsa_8021q_vlans and swap in the bridge_vlans in
the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING handler, there are no bridge
VLANs (yet). So we have wiped the VLAN table clean, and the low-level
static config checker complains of an invalid configuration. We _will_
add the bridge VLANs using the dynamic config interface, albeit later,
when nbp_vlan_add() calls us. So it is natural that it fails.
So why did it ever work?
Surprisingly, it looks like I only tested this configuration with 2
things set up in a particular way:
- a network manager that brings all ports up
- a kernel with CONFIG_VLAN_8021Q=y
It is widely known that commit ad1afb003939 ("vlan_dev: VLAN 0 should be
treated as "no vlan tag" (802.1p packet)") installs VID 0 to every net
device that comes up. DSA treats these VLANs as bridge VLANs, and
therefore, in my testing, the list of bridge_vlans was never empty.
However, if CONFIG_VLAN_8021Q is not enabled, or the port is not up when
it joins a VLAN-aware bridge, the bridge_vlans list will be temporarily
empty, and the sja1105_static_config_reload() call from
sja1105_vlan_filtering() will fail.
To fix this, the simplest thing is to keep VID 4095, the one used for
CPU-injected control packets since commit ed040abca4c1 ("net: dsa:
sja1105: use 4095 as the private VLAN for untagged traffic"), in the
list of bridge VLANs too, not just the list of tag_8021q VLANs. This
ensures that the list of bridge VLANs will never be empty.
Fixes: ec5ae61076d0 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Reported-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Wed, 21 Jul 2021 17:27:38 +0000 (10:27 -0700)]
tcp: disable TFO blackhole logic by default
Multiple complaints have been raised from the TFO users on the internet
stating that the TFO blackhole logic is too aggressive and gets falsely
triggered too often.
(e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/)
Considering that most middleboxes no longer drop TFO packets, we decide
to disable the blackhole logic by setting
/proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default.
Fixes: cf1ef3f0719b4 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Wed, 21 Jul 2021 18:45:54 +0000 (14:45 -0400)]
sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set
Currently, in sctp_packet_config(), sctp_transport_pmtu_check() is
called to update transport pathmtu with dst's mtu when dst's mtu
has been changed by non sctp stack like xfrm.
However, this should only happen when SPP_PMTUD_ENABLE is set, no
matter where dst's mtu changed. This patch is to fix by checking
SPP_PMTUD_ENABLE flag before calling sctp_transport_pmtu_check().
Thanks Jacek for reporting and looking into this issue.
v1->v2:
- add the missing "{" to fix the build error.
Fixes: 69fec325a643 ('Revert "sctp: remove sctp_transport_pmtu_check"') Reported-by: Jacek Szafraniec <jacek.szafraniec@nokia.com> Tested-by: Jacek Szafraniec <jacek.szafraniec@nokia.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 's390-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- fix / add expoline usage in "DMA" code
- fix compat vdso Makefile to avoid permanent rebuild
- fix ftrace_update_ftrace_func to avoid NULL pointer dereference
- update defconfigs
- trivial coding style fix
* tag 's390-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/cpumf: fix semicolon.cocci warnings
s390/boot: fix use of expolines in the DMA code
s390/ftrace: fix ftrace_update_ftrace_func implementation
s390/defconfig: allow early device mapper disks
s390/vdso32: add vdso32.lds to targets
Merge tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, there was a bit of a kerfuffle
with some last minute review on hte spi-cadence-quadspi division by
zero change but otherwise nothing terribly remarkable here - important
fixes if you have the hardware but nothing with too wide an impact"
* tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-bcm2835: Fix deadlock
spi: cadence: Correct initialisation of runtime PM again
spi: cadence-quadspi: Disable Auto-HW polling
spi: spi-cadence-quadspi: Fix division by zero warning
spi: spi-cadence-quadspi: Revert "Fix division by zero warning"
spi: spi-cadence-quadspi: Fix division by zero warning
spi: mediatek: move devm_spi_register_master position
spi: mediatek: fix fifo rx mode
spi: atmel: Fix CS and initialization bug
spi: stm32: fixes pm_runtime calls in probe/remove
spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay
spi: stm32h7: fix full duplex irq handler handling
Merge tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver specific fixes that came in since the merge window, plus
a change to mark the regulator-fixed-domain DT binding as deprecated
in order to try to to discourage any new users while a better solution
is put in place"
* tag 'regulator-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: hi6421: Fix getting wrong drvdata
regulator: mtk-dvfsrc: Fix wrong dev pointer for devm_regulator_register
regulator: fixed: Mark regulator-fixed-domain as deprecated
regulator: bd9576: Fix testing wrong flag in check_temp_flag_mismatch
regulator: hi6421v600: Fix getting wrong drvdata that causes boot failure
regulator: rt5033: Fix n_voltages settings for BUCK and LDO
regulator: rtmv20: Fix wrong mask for strobe-polarity-high
Merge tag 'afs-fixes-20210721' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Fix a tracepoint that causes one of the tracing subsystem query files
to crash if the module is loaded
- Fix afs_writepages() to take account of whether the storage rpc
actually succeeded when updating the cyclic writeback counter
- Fix some error code propagation/handling
- Fix place where afs_writepages() was setting writeback_index to a
file position rather than a page index
* tag 'afs-fixes-20210721' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Remove redundant assignment to ret
afs: Fix setting of writeback_index
afs: check function return
afs: Fix tracepoint string placement with built-in AFS
Stylon Wang [Wed, 21 Jul 2021 04:25:24 +0000 (12:25 +0800)]
drm/amd/display: Fix ASSR regression on embedded panels
[Why]
Regression found in some embedded panels traces back to the earliest
upstreamed ASSR patch. The changed code flow are causing problems
with some panels.
[How]
- Change ASSR enabling code while preserving original code flow
as much as possible
- Simplify the code on guarding with internal display flag
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
[Why]
PMFW message which previously thought to only control Z9 controls both
Z9 and Z10. Also HW design team requested that Z9 must only be supported
on eDP due to content protection interop.
[How]
Change zstate support condition to match updated policy
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines
of 4K resolution lines to 5 lines of 4K resolution lines. All Line
Buffer can be used as extended memory for P State change latency hiding.
The maximum number of lines is increased to 32 lines. Finally,
LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB
memory piece 2) are not affected, no change in size, only 3 pieces is
affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0
and LB_MEMORY_CONFIG_3 (for 4:2:0) modes.
Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
We're missing a default value for dram_channel_width_bytes in the
DCN3.1 SOC bounding box and we don't currently have the interface in
place to query the actual value from VBIOS.
Put in a hardcoded default until we have the interface in place.
Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Query VCO frequency from register for DCN3.1
[Why]
Hardcoding the VCO frequency isn't correct since we don't own or control
the value.
In the case where the hardcode is also missing we can't lightup display.
[How]
Query from the CLK register instead. Update the DFS frequency to be able
to compute the VCO frequency.
Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Fix max vstartup calculation for modes with borders
[Why]
Vertical and horizontal borders in timings are treated as increasing the
active area - vblank and hblank actually shrink.
Our input into DML does not include these borders so it incorrectly
assumes it has more time than available for vstartup and tmdl
calculations for some modes with borders.
An example of such a timing would be 640x480@72Hz:
Eric Yang [Wed, 23 Jun 2021 19:48:02 +0000 (15:48 -0400)]
drm/amd/display: implement workaround for riommu related hang
[Why]
During S4/S5/reboot, sometimes riommu invalidation request arrive too
early, DCN may be unable to respond to the invalidation request
resulting in pstate hang.
[How]
VBIOS will force allow pstate for riommu invalidation and driver will
clear it after powering down display pipes.
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Victor Lu [Thu, 24 Jun 2021 15:05:42 +0000 (11:05 -0400)]
drm/amd/display: Fix comparison error in dcn21 DML
[why]
A comparison error made it possible to not iterate through all the
specified prefetch modes.
[how]
Correct "<" to "<="
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge tag 'asoc-fix-v5.14-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.14
A collection of fixes for ASoC that have come in since the merge window,
all driver specific. There is a new core feature added for reversing
the order of operations when shutting down, this is needed to fix a bug
with the AMD Stonyridge platform, and we also tweak the Kconfig to make
the SSM2518 driver user selectable so it can be used with generic cards
but that requires no actual code changes.
The rework of the ixp46x cpu detection left the network driver in
a half broken state:
drivers/net/ethernet/xscale/ptp_ixp46x.c: In function 'ptp_ixp_init':
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: error: 'IXP4XX_TIMESYNC_BASE_VIRT' undeclared (first use in this function)
290 | (struct ixp46x_ts_regs __iomem *) IXP4XX_TIMESYNC_BASE_VIRT;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/xscale/ptp_ixp46x.c:290:51: note: each undeclared identifier is reported only once for each function it appears in
drivers/net/ethernet/xscale/ptp_ixp46x.c: At top level:
drivers/net/ethernet/xscale/ptp_ixp46x.c:323:1: error: data definition has no type or storage class [-Werror]
323 | module_init(ptp_ixp_init);
I have patches to complete the transition for a future release, but
for the moment, add the missing include statements to get it to build
again.
Fixes: 09aa9aabdcc4 ("soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset")
intended to remove the call to ibmvnic_tx_scrq_flush() when the
->resetting flag is true and was tested that way. But during the final
rebase to net-next, the hunk got applied to a block few lines below
(which happened to have the same diff context) and the wrong call to
ibmvnic_tx_scrq_flush() got removed.
Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring
the one that was incorrectly removed.
Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 21 Jul 2021 15:50:52 +0000 (08:50 -0700)]
Merge branch 'pmtu-esp'
Vadim Fedorenko ays:
====================
Fix PMTU for ESP-in-UDP encapsulation
Bug 213669 uncovered regression in PMTU discovery for UDP-encapsulated
routes and some incorrect usage in udp tunnel fields. This series fixes
problems and also adds such case for selftests
v3:
- update checking logic to account SCTP use case
v2:
- remove refactor code that was in first patch
- move checking logic to __udp{4,6}_lib_err_encap
- add more tests, especially routed configuration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Ekstrand [Tue, 20 Jul 2021 18:21:08 +0000 (13:21 -0500)]
drm/i915: Correct the docs for intel_engine_cmd_parser
In 93b713304188 ("drm/i915: Revert "drm/i915/gem: Asynchronous
cmdparser""), the parameters to intel_engine_cmd_parser() were altered
without updating the docs, causing Fi.CI.DOCS to start failing.
Fixes: c9d9fdbc108a ("drm/i915: Revert "drm/i915/gem: Asynchronous cmdparser"") Signed-off-by: Jason Ekstrand <jason@jlekstrand.net> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210720182108.2761496-1-jason@jlekstrand.net Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Added 'Fixes:' tag and corrected the hash for the ancestor]
(cherry picked from commit 15eb083bdb561bb4862cd04cd0523e55483e877e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Updated Fixes tag to match fixes branch]
Commit d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err")
added checks for encapsulated sockets but it broke cases when there is
no implementation of encap_err_lookup for encapsulation, i.e. ESP in
UDP encapsulation. Fix it by calling encap_err_lookup only if socket
implements this method otherwise treat it as legal socket.
Fixes: d26796ae5894 ("udp: check udp sock encap_type in __udp_lib_err") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This is an use-after-free issue caused by not updating asoc->shkey after
it was replaced in the key list asoc->endpoint_shared_keys, and the old
key was freed.
This patch is to fix by also updating active_key for asoc when old key is
being replaced with a new one. Note that this issue doesn't exist in
sctp_auth_del_key_id(), as it's not allowed to delete the active_key
from the asoc.
Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key") Reported-by: syzbot+b774577370208727d12b@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Adrian Hunter [Fri, 16 Jul 2021 11:44:07 +0000 (14:44 +0300)]
driver core: Prevent warning when removing a device link from unregistered consumer
sysfs_remove_link() causes a warning if the parent directory does not
exist. That can happen if the device link consumer has not been registered.
So do not attempt sysfs_remove_link() in that case.
Fixes: 287905e68dd29 ("driver core: Expose device link details in sysfs") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # 5.9+ Reviewed-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20210716114408.17320-2-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When registering the MDIO bus for a r8169 device, we use the PCI
bus/device specifier as a (seemingly) unique device identifier.
However the very same BDF number can be used on another PCI segment,
which makes the driver fail probing:
Add the segment number to the device name to make it more unique.
This fixes operation on ARM N1SDP boards, with two boards connected
together to form an SMP system, and all on-board devices showing up
twice, just on different PCI segments. A similar issue would occur on
large systems with many PCI slots and multiple RTL8169 NICs.
Fixes: f1e911d5d0dfd ("r8169: add basic phylib support") Signed-off-by: Sayanta Pattanayak <sayanta.pattanayak@arm.com>
[Andre: expand commit message, use pci_domain_nr()] Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Ujfalusi [Tue, 13 Jul 2021 09:34:38 +0000 (12:34 +0300)]
driver core: auxiliary bus: Fix memory leak when driver_register() fail
If driver_register() returns with error we need to free the memory
allocated for auxdrv->driver.name before returning from
__auxiliary_driver_register()
Fixes: 7de3697e9cbd4 ("Add auxiliary bus support") Reviewed-by: Dan Williams <dan.j.williams@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20210713093438.3173-1-peter.ujfalusi@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ret is set to -ENOENT and -ENOMEM but this value is never
read as it is overwritten or not used later on, hence it is a
redundant assignment and can be removed.
Cleans up the following clang-analyzer warning:
fs/afs/dir.c:2014:4: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
fs/afs/dir.c:659:2: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
[DH made the following modifications:
- In afs_rename(), -ENOMEM should be placed in op->error instead of ret,
rather than the assignment being removed entirely. afs_put_operation()
will pick it up from there and return it.
- If afs_sillyrename() fails, its error code should be placed in op->error
rather than in ret also.
]
Tom Rix [Fri, 30 Apr 2021 15:50:31 +0000 (08:50 -0700)]
afs: check function return
Static analysis reports this problem
write.c:773:29: warning: Assigned value is garbage or undefined
mapping->writeback_index = next;
^ ~~~~
The call to afs_writepages_region() can return without setting
next. So check the function return before using next.
Changes:
ver #2:
- Need to fix the range_cyclic case also[1].
David Howells [Tue, 15 Jun 2021 10:57:26 +0000 (11:57 +0100)]
afs: Fix tracepoint string placement with built-in AFS
To quote Alexey[1]:
I was adding custom tracepoint to the kernel, grabbed full F34 kernel
.config, disabled modules and booted whole shebang as VM kernel.
Then did
perf record -a -e ...
It crashed:
general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:t_show+0x22/0xd0
Then reproducer was narrowed to
# cat /sys/kernel/tracing/printk_formats
Original F34 kernel with modules didn't crash.
So I started to disable options and after disabling AFS everything
started working again.
The root cause is that AFS was placing char arrays content into a
section full of _pointers_ to strings with predictable consequences.
Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
CM_NAME macro.
Steps to reproduce:
CONFIG_AFS=y
CONFIG_TRACING=y
# cat /sys/kernel/tracing/printk_formats
Fix this by the following means:
(1) Add enum->string translation tables in the event header with the AFS
and YFS cache/callback manager operations listed by RPC operation ID.
(2) Modify the afs_cb_call tracepoint to print the string from the
translation table rather than using the string at the afs_call name
pointer.
(3) Switch translation table depending on the service we're being accessed
as (AFS or YFS) in the tracepoint print clause. Will this cause
problems to userspace utilities?
Note that the symbolic representation of the YFS service ID isn't
available to this header, so I've put it in as a number. I'm not sure
if this is the best way to do this.
(4) Remove the name wrangling (CM_NAME) macro and put the names directly
into the afs_call_type structs in cmservice.c.
Commit 1be7107fbe18 ("mm: larger stack guard gap, between vmas") fixed
up all architectures to deal with the stack guard gap. But when nds32
was added to the tree, it forgot to do the same thing.
Resolve this by properly fixing up the nsd32's version of
arch_get_unmapped_area()
Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Qiang Liu <cyruscyliu@gmail.com> Cc: stable <stable@vger.kernel.org> Reported-by: iLifetruth <yixiaonn@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Link: https://lore.kernel.org/r/20210629104024.2293615-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The qrtr-mhi client driver assumes that inbound buffers are
automatically allocated and queued by the MHI core, but this
doesn't happen for mhi pci devices since IPCR inbound channel is
not flagged with auto_queue, causing unusable IPCR (qrtr)
feature. Fix that.
bus: mhi: core: Validate channel ID when processing command completions
MHI reads the channel ID from the event ring element sent by the
device which can be any value between 0 and 255. In order to
prevent any out of bound accesses, add a check against the maximum
number of channels supported by the controller and those channels
not configured yet so as to skip processing of that event ring
element.
bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean
Devices such as SDX24 do not have the provision for inband wake
doorbell in the form of channel 127 and instead have a sideband
GPIO for it. Newer devices such as SDX55 or SDX65 support inband
wake method by default. Ensure the functionality is used based on
this such that device wake stays held when a client driver uses
mhi_device_get() API or the equivalent debugfs entry.
Pavel Skripkin [Thu, 8 Jul 2021 11:25:18 +0000 (14:25 +0300)]
drm/ttm: add missing NULL checks
My local syzbot instance hit GPF in ttm_bo_release().
Unfortunately, syzbot didn't produce a reproducer for this, but I
found out possible scenario:
drm_gem_vram_create() <-- drm_gem_vram_object kzalloced
(bo embedded in this object)
ttm_bo_init()
ttm_bo_init_reserved()
ttm_resource_alloc()
man->func->alloc() <-- allocation failure
ttm_bo_put()
ttm_bo_release()
ttm_mem_io_free() <-- bo->resource == NULL passed
as second argument
*GPF*
Added NULL check inside ttm_mem_io_free() to prevent reported GPF and
make this function NULL save in future.
Same problem was in ttm_bo_move_to_lru_tail() as Christian reported.
ttm_bo_move_to_lru_tail() is called in ttm_bo_release() and mem pointer
can be NULL as well as in ttm_mem_io_free().
c742199a014d ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
breaks arm64 in at least two ways for configurations where PUD or PMD
folding occur:
1. We no longer install huge-vmap mappings and silently fall back to
page-granular entries, despite being able to install block entries
at what is effectively the PGD level.
2. If the linear map is backed with block mappings, these will now
silently fail to be created in alloc_init_pud(), causing a panic
early during boot.
The pgtable selftests caught this, although a fix has not been
forthcoming and Christophe is AWOL at the moment, so just revert the
change for now to get a working -rc3 on which we can queue patches for
5.15.
A simple revert breaks the build for 32-bit PowerPC 8xx machines, which
rely on the default function definitions when the corresponding
page-table levels are folded, since commit a6a8f7c4aa7e ("powerpc/8xx:
add support for huge pages on VMAP and VMALLOC"), eg:
powerpc64-linux-ld: mm/vmalloc.o: in function `vunmap_pud_range':
linux/mm/vmalloc.c:362: undefined reference to `pud_clear_huge'
To avoid that, add stubs for pud_clear_huge() and pmd_clear_huge() in
arch/powerpc/mm/nohash/8xx.c as suggested by Christophe.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: c742199a014d ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org>
[mpe: Fold in 8xx.c changes from Christophe and mention in change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/linux-arm-kernel/CAMuHMdXShORDox-xxaeUfDW3wx2PeggFSqhVSHVZNKCGK-y_vQ@mail.gmail.com/ Link: https://lore.kernel.org/r/20210717160118.9855-1-jonathan@marek.ca Link: https://lore.kernel.org/r/87r1fs1762.fsf@mpe.ellerman.id.au Signed-off-by: Will Deacon <will@kernel.org>
arm64: smccc: Save lr before calling __arm_smccc_sve_check()
Commit cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register
saving hint") added a call to __arm_smccc_sve_check() which clobbers the
lr (register x30), causing __arm_smccc_hvc() to return to itself and
crash. Save lr on the stack before calling __arm_smccc_sve_check(). Save
the frame pointer (x29) to complete the frame record, and adjust the
offsets used to access stack parameters.
Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20210721071834.69130-1-jean-philippe@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
While the patch was working as stated,ie preventing the L850-GL LTE modem
from crashing on some U3 wake-ups due to a race condition between the
host wake-up and the modem-side wake-up, when using the MBIM interface,
this would force disabling the USB runtime PM on the device.
The increased power consumption is significant for LTE laptops,
and given that with decently recent modem firmwares, when the modem hits
the bug, it automatically recovers (ie it drops from the bus, but
automatically re-enumerates after less than half a second, rather than being
stuck until a power cycle as it was doing with ancient firmware), for
most people, the trade-off now seems in favor of re-enabling it by
default.
For people with access to the platform code, the bug can also be worked-around
successfully by changing the USB3 LFPM polling off-time for the XHCI
controller in the BIOS code.
Wei Yongjun [Fri, 21 May 2021 02:10:10 +0000 (02:10 +0000)]
usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set
Gcc report build error as following when CONFIG_WWAN_CORE is not set:
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_disconnect':
cdc-wdm.c:(.text+0xb2a): undefined reference to `wwan_remove_port'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_in_callback':
cdc-wdm.c:(.text+0xf23): undefined reference to `wwan_port_rx'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_stop':
cdc-wdm.c:(.text+0x127d): undefined reference to `wwan_port_get_drvdata'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx':
cdc-wdm.c:(.text+0x12d9): undefined reference to `wwan_port_get_drvdata'
x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x13c1): undefined reference to `wwan_port_txoff'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_start':
cdc-wdm.c:(.text+0x13e0): undefined reference to `wwan_port_get_drvdata'
x86_64-linux-gnu-ld: cdc-wdm.c:(.text+0x1431): undefined reference to `wwan_port_txon'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_wwan_port_tx_complete':
cdc-wdm.c:(.text+0x14a4): undefined reference to `wwan_port_txon'
x86_64-linux-gnu-ld: drivers/usb/class/cdc-wdm.o: in function `wdm_create.cold':
cdc-wdm.c:(.text.unlikely+0x209): undefined reference to `wwan_create_port'
Using CONFIG_WWAN_CORE instead of CONFIG_WWAN to avoid build error.
Marek Szyprowski [Fri, 16 Jul 2021 05:01:27 +0000 (07:01 +0200)]
usb: dwc2: Skip clock gating on Samsung SoCs
Commit 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr
function.") changed the way the driver handles power down modes in a such
way that it uses clock gating when no other power down mode is available.
This however doesn't work well on the DWC2 implementation used on the
Samsung SoCs. When a clock gating is enabled, system hangs. It looks that
the proper clock gating requires some additional glue code in the shared
USB2 PHY and/or Samsung glue code for the DWC2. To restore driver
operation on the Samsung SoCs simply skip enabling clock gating mode
until one finds what is really needed to make it working reliably.
usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop()
This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.
projects / kernel.git / log