New ICs (like the one on the Lenovo T480s) answer to
ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack
as i2c_smbus_read_block_data() uses the values returned by the i2c
device to know how many data it need to return.
i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX)
and there is no safeguard on how many bytes are provided in the return
value. Ensure we always have enough space for any future firmware.
Also 0-initialize the values to prevent any access to uninitialized memory.
Input: synaptics - add Lenovo 80 series ids to SMBus
This time, Lenovo decided to go with different pieces in its latest
series of Thinkpads.
For those we have been able to test:
- the T480 is using Synaptics with an IBM trackpoint
-> it behaves properly with or without intertouch, there is no point
not using RMI4
- the X1 Carbon 6th gen is using Synaptics with an IBM trackpoint
-> the touchpad doesn't behave properly under PS/2 so we have to
switch it to RMI4 if we do not want to have disappointed users
- the X280 is using Synaptics with an ALPS trackpoint
-> the recent fixes in the trackpoint handling fixed it so upstream
now works fine with or without RMI4, and there is no point not
using RMI4
- the T480s is using an Elan touchpad, so that's a different story
Aaron Ma [Sat, 3 Feb 2018 19:49:22 +0000 (11:49 -0800)]
Input: synaptics - add Intertouch support on X1 Carbon 6th and X280
Synaptics devices reported it has Intertouch support,
and it fails via PS/2 as following logs:
psmouse serio2: Failed to reset mouse on synaptics-pt/serio0
psmouse serio2: Failed to enable mouse on synaptics-pt/serio0
Set these new devices to use SMBus to fix this issue, then they report
SMBus version 3 is using, patch:
https://patchwork.kernel.org/patch/9989547/ enabled SMBus ver 3 and
makes synaptics devices work fine on SMBus mode.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Edvard Holst [Sat, 3 Feb 2018 19:46:15 +0000 (11:46 -0800)]
Input: synaptics - Lenovo Thinkpad X1 Carbon G5 (2017) with Elantech trackpoints should use RMI
Lenovo use two different trackpoints in the fifth generation Thinkpad X1
Carbon. Both are accessible over SMBUS/RMI but the pnpIDs are missing.
This patch is for the Elantech trackpoint specifically which also
reports SMB version 3 so rmi_smbus needs to be updated in order to
handle it.
For the record, I was not the first one to come up with this patch as it
has been floating around the internet for a while now. However, I have
spent significant time with testing and my efforts to find the original
author of the patch have been unsuccessful.
Signed-off-by: Edvard Holst <edvard.holst@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: atmel_mxt_ts - add missing compatible strings to OF device table
Commit 9af00b7d114f ("i2c: core: report OF style module alias for devices
registered via OF") fixed how the I2C core reports the module alias when
devices are registered via OF.
But the atmel_mxt_ts driver only has an "atmel,maxtouch" compatible in its
OF device ID table, so if a Device Tree is using a different one, autoload
won't be working for the module (the matching works because the I2C device
ID table is used as a fallback).
So add compatible strings for each of the entries in the I2C device table.
Fixes: 9af00b7d114f ("i2c: core: report OF style module alias for devices registered via OF") Reported-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org>
[dtor: document which compatibles are deprecated and should not be used] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nick Dyer [Tue, 1 May 2018 18:40:18 +0000 (11:40 -0700)]
Input: atmel_mxt_ts - fix the firmware update
The automatic update mechanism will trigger an update if the
info block CRCs are different between maxtouch configuration
file (maxtouch.cfg) and chip.
The driver compared the CRCs without retrieving the chip CRC,
resulting always in a failure and firmware flashing action
triggered. Fix this issue by retrieving the chip info block
CRC before the check.
Note that this solution has the benefit that by reading the
information block and the object table into a contiguous region
of memory, we can verify the checksum at probe time. This means
we make sure that we are indeed talking to a chip that supports
object protocol correctly.
Using this patch on a kevin chromebook, the touchscreen and
touchpad drivers are able to match the CRC:
Input: atmel_mxt_ts - add touchpad button mapping for Samsung Chromebook Pro
This patch adds the correct platform data information for the Caroline
Chromebook, so that the mouse button does not get stuck in pressed state
after the first click.
The Samus button keymap and platform data definition are the correct
ones for Caroline, so they have been reused here.
UI_SET_LEDBIT ioctl() causes the following KASAN splat when used with
led > LED_CHARGING:
[ 1274.663418] BUG: KASAN: slab-out-of-bounds in input_leds_connect+0x611/0x730 [input_leds]
[ 1274.663426] Write of size 8 at addr ffff88003377b2c0 by task ckb-next-daemon/5128
This happens because we were writing to the led structure before making
sure that it exists.
Input: synaptics-rmi4 - fix an unchecked out of memory error path
When extending the rmi_spi buffers, we must check that no out of memory
error occurs, otherwise we may access data above the currently allocated
memory.
Propagate the error code returned by 'rmi_spi_manage_pools()' instead.
Ondrej Zary [Tue, 3 Apr 2018 17:24:34 +0000 (10:24 -0700)]
Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad
The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g.
VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all
VAIO machines by the nomux blacklist, the data from touch sensor
buttons and touchpad are combined. The protocol used by the buttons is
probably similar to the touchpad protocol (both are Synaptics) so both
devices get enabled. The controller combines the data, creating a mess
which results in random button clicks, touchpad stopping working and
lost sync error messages:
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse serio1: issuing reconnect request
Add a new i8042_dmi_forcemux_table whitelist with VGN-CS.
With MUX enabled, touch sensor buttons are detected as separate device
(and left disabled as there's currently no driver), fixing all touchpad
problems.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Marek Szyprowski [Fri, 30 Mar 2018 18:12:21 +0000 (11:12 -0700)]
Input: stmfts - use async probe & suspend/resume to avoid 2s delay
Executing stmfts_power_on() function lasts over 2 seconds, what
significantly slows down the boot and resume processes if driver is
compiled in. Avoid this delay by forcing this driver to be probed
and suspended/resumed asynchronously.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Masaki Ota [Mon, 29 Jan 2018 22:36:54 +0000 (14:36 -0800)]
Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.
The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.
The same issue exists on Dell Latitude 7370.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929 Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads") Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com> Tested-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Jonathan Liu <net147@gmail.com> Tested-by: Jaak Ristioja <jaak@ristioja.ee> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Francis Therien [Mon, 26 Mar 2018 22:59:00 +0000 (15:59 -0700)]
Input: xpad - add PDP device id 0x02a4
Adds support for a PDP Xbox One controller with device ID
(0x06ef:0x02a4). The Product string for this device is "PDP Wired
Controller for Xbox One - Stealth Series | Phantom Black".
Signed-off-by: Francis Therien <frtherien@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Jeffy Chen [Fri, 9 Mar 2018 00:03:27 +0000 (16:03 -0800)]
Input: gpio-keys - add support for wakeup event action
Add support for specifying event actions to trigger wakeup when using
the gpio-keys input device as a wakeup source.
This would allow the device to configure when to wakeup the system. For
example a gpio-keys input device for pen insert, may only want to wakeup
the system when ejecting the pen.
Suggested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Maruyama Shohei [Wed, 14 Mar 2018 16:55:24 +0000 (09:55 -0700)]
Input: silead - add Chuwi Hi8 support
This commit add ACPI support for Chuwi Hi8 tablet. On the ACPI table of
the tablet, GSL1680 is registered as MSSL0001, so the driver does not
recognize the device. This commit resolve it.
Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list
Reset i8042 before probing because of insufficient BIOS initialisation of
the i8042 serial controller. This makes Synaptics touchpad detection
possible. Without resetting the Synaptics touchpad is not detected because
there are always NACK messages from AUX port.
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working
after suspend-resume cycle. Due to strange state of the device another
suspend is impossible.
The following dmesg errors can be observed:
thinkpad_acpi: EC reports that Thermal Table has changed
rmi4_smbus 7-002c: failed to get SMBus version number!
rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask.
rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16.
rmi4_f01 rmi4-00.fn01: Resume failed with code -16.
rmi4_physical rmi4-00: Failed to suspend functions: -16
rmi4_smbus 7-002c: Failed to resume device: -16
PM: resume devices took 0.640 seconds
rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16).
rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts!
rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts!
psmouse: probe of serio3 failed with error -1
2. On another T460p with BIOS version 2.15 two finger scrolling gesture
on the touchpad stops working after suspend-resume cycle (about 75%
reproducibility, when it still works, the scrolling gesture becomes
laggy). Nothing suspicious appears in the dmesg.
Analysis form Richard Schütz:
"RMI is unreliable on the ThinkPad T460p because the device is affected
by the firmware behavior addressed in b5723a87cb35 ("i2c: i801: Allow
ACPI SystemIO OpRegion to conflict with PCI BAR")."
Linus Torvalds [Sun, 4 Mar 2018 20:12:48 +0000 (12:12 -0800)]
Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of fixes for x86:
- Add missing instruction suffixes to assembly code so it can be
compiled by newer GAS versions without warnings.
- Switch refcount WARN exceptions to UD2 as we did in general
- Make the reboot on Intel Edison platforms work
- A small documentation update so text and sample command match"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation, x86, resctrl: Make text and sample command match
x86/platform/intel-mid: Handle Intel Edison reboot correctly
x86/asm: Add instruction suffixes to bitops
x86/entry/64: Add instruction suffix
x86/refcounts: Switch to UD2 for exceptions
Linus Torvalds [Sun, 4 Mar 2018 19:40:16 +0000 (11:40 -0800)]
Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti fixes from Thomas Gleixner:
"Three fixes related to melted spectrum:
- Sync the cpu_entry_area page table to initial_page_table on 32 bit.
Otherwise suspend/resume fails because resume uses
initial_page_table and triggers a triple fault when accessing the
cpu entry area.
- Zero the SPEC_CTL MRS on XEN before suspend to address a
shortcoming in the hypervisor.
- Fix another switch table detection issue in objtool"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table
objtool: Fix another switch table detection issue
x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
Linus Torvalds [Sun, 4 Mar 2018 19:34:49 +0000 (11:34 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes from the timer departement:
- Add a missing timer wheel clock forward when migrating timers off a
unplugged CPU to prevent operating on a stale clock base and
missing timer deadlines.
- Use the proper shift count to extract data from a register value to
prevent evaluating unrelated bits
- Make the error return check in the FSL timer driver work correctly.
Checking an unsigned variable for less than zero does not really
work well.
- Clarify the confusing comments in the ARC timer code"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Forward timer base before migrating timers
clocksource/drivers/arc_timer: Update some comments
clocksource/drivers/mips-gic-timer: Use correct shift count to extract data
clocksource/drivers/fsl_ftm_timer: Fix error return checking
Linus Torvalds [Sun, 4 Mar 2018 19:04:27 +0000 (11:04 -0800)]
Merge tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- when NR_CPUS is large, a SRCU structure can significantly inflate
size of the main filesystem structure that would not be possible to
allocate by kmalloc, so the kvalloc fallback is used
- improved error handling
- fix endiannes when printing some filesystem attributes via sysfs,
this is could happen when a filesystem is moved between different
endianity hosts
- send fixes: the NO_HOLE mode should not send a write operation for a
file hole
- fix log replay for for special files followed by file hardlinks
- fix log replay failure after unlink and link combination
- fix max chunk size calculation for DUP allocation
* tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix log replay failure after unlink and link combination
Btrfs: fix log replay failure after linking special file and fsync
Btrfs: send, fix issuing write op when processing hole in no data mode
btrfs: use proper endianness accessors for super_copy
btrfs: alloc_chunk: fix DUP stripe size handling
btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster
btrfs: handle failure of add_pending_csums
btrfs: use kvzalloc to allocate btrfs_fs_info
Linus Torvalds [Sat, 3 Mar 2018 22:32:00 +0000 (14:32 -0800)]
Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A 4.16 regression fix, three fixes for -stable, and a cleanup fix:
- During the merge window support for the new ACPI NVDIMM Platform
Capabilities structure disabled support for "deep flush", a
force-unit- access like mechanism for persistent memory. Restore
that mechanism.
- VFIO like RDMA is yet one more memory registration / pinning
interface that is incompatible with Filesystem-DAX. Disable long
term pins of Filesystem-DAX mappings via VFIO.
- The Filesystem-DAX detection to prevent long terms pins mistakenly
also disabled Device-DAX pins which are not subject to the same
block- map collision concerns.
- Similar to the setup path, softlockup warnings can trigger in the
shutdown path for large persistent memory namespaces. Teach
for_each_device_pfn() to perform cond_resched() in all cases.
- Boaz noticed that the might_sleep() in dax_direct_access() is stale
as of the v4.15 kernel.
These have received a build success notification from the 0day robot,
and the longterm pin fixes have appeared in -next. However, I recently
rebased the tree to remove some other fixes that need to be reworked
after review feedback.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
memremap: fix softlockup reports at teardown
libnvdimm: re-enable deep flush for pmem devices via fsync()
vfio: disable filesystem-dax page pinning
dax: fix vma_is_fsdax() helper
dax: ->direct_access does not sleep anymore
Linus Torvalds [Sat, 3 Mar 2018 18:37:01 +0000 (10:37 -0800)]
Merge tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- suppress sparse warnings about unknown attributes
- fix typos and stale comments
- fix build error of arch/sh
- fix wrong use of ld-option vs cc-ldoption
- remove redundant GCC_PLUGINS_CFLAGS assignment
- fix another memory leak of Kconfig
- fix line number in error messages of Kconfig
- do not write confusing CONFIG_DEFCONFIG_LIST out to .config
- add xstrdup() to Kconfig to handle memory shortage errors
- show also a Debian package name if ncurses is missing
* tag 'kbuild-fixes-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
MAINTAINERS: take over Kconfig maintainership
kconfig: fix line number in recursive inclusion error message
Coccinelle: memdup: Fix typo in warning messages
kconfig: Update ncurses package names for menuconfig
kbuild/kallsyms: trivial typo fix
kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
kconfig: Don't leak choice names during parsing
sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
kconfig: add xstrdup() helper
kbuild: disable sparse warnings about unknown attributes
Makefile: Fix lying comment re. silentoldconfig
Linus Torvalds [Sat, 3 Mar 2018 18:27:14 +0000 (10:27 -0800)]
Merge tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some build fixes with randconfigs
- an m88ds3103 fix to prevent an OOPS if the chip doesn't provide the
right version during probe (with can happen if the hardware hangs)
- a potential out of array bounds reference in tvp5150
- some fixes and improvements in the DVB memory mapped API (added for
kernel 4.16)
* tag 'media/v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vb2: Makefile: place vb2-trace together with vb2-core
media: Don't let tvp5150_get_vbi() go out of vbi_ram_default array
media: dvb: update buffer mmaped flags and frame counter
media: dvb: add continuity error indicators for memory mapped buffers
media: dmxdev: Fix the logic that enables DMA mmap support
media: dmxdev: fix error code for invalid ioctls
media: m88ds3103: don't call a non-initalized function
media: au0828: add VIDEO_V4L2 dependency
media: dvb: fix DVB_MMAP dependency
media: dvb: fix DVB_MMAP symbol name
media: videobuf2: fix build issues with vb2-trace
media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part
Linus Torvalds [Sat, 3 Mar 2018 03:40:43 +0000 (19:40 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"x86:
- fix NULL dereference when using userspace lapic
- optimize spectre v1 mitigations by allowing guests to use LFENCE
- make microcode revision configurable to prevent guests from
unnecessarily blacklisting spectre v2 mitigation feature"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix vcpu initialization with userspace lapic
KVM: X86: Allow userspace to define the microcode version
KVM: X86: Introduce kvm_get_msr_feature()
KVM: SVM: Add MSR-based feature support for serializing LFENCE
KVM: x86: Add a framework for supporting MSR-based features
Dan Williams [Wed, 7 Feb 2018 03:34:11 +0000 (19:34 -0800)]
memremap: fix softlockup reports at teardown
The cond_resched() currently in the setup path needs to be duplicated in
the teardown path. Rather than require each instance of
for_each_device_pfn() to open code the same sequence, embed it in the
helper.
Link: https://github.com/intel/ixpdimm_sw/issues/11 Cc: "Jérôme Glisse" <jglisse@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Fixes: c8509fae6320 ("mm, zone_device: Replace {get, put}_zone_device_page()...") Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Jiang [Sat, 3 Mar 2018 03:31:40 +0000 (19:31 -0800)]
libnvdimm: re-enable deep flush for pmem devices via fsync()
Re-enable deep flush so that users always have a way to be sure that a
write makes it all the way out to media. Writes from the PMEM driver
always arrive at the NVDIMM since movnt is used to bypass the cache, and
the driver relies on the ADR (Asynchronous DRAM Refresh) mechanism to
flush write buffers on power failure. The Deep Flush mechanism is there
to explicitly write buffers to protect against (rare) ADR failure. This
change prevents a regression in deep flush behavior so that applications
can continue to depend on fsync() as a mechanism to trigger deep flush
in the filesystem-DAX case.
Fixes: c464227fc3ae5 ("acpi: nfit: Add support for detect platform CPU cache...") Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Sun, 4 Feb 2018 18:34:02 +0000 (10:34 -0800)]
vfio: disable filesystem-dax page pinning
Filesystem-DAX is incompatible with 'longterm' page pinning. Without
page cache indirection a DAX mapping maps filesystem blocks directly.
This means that the filesystem must not modify a file's block map while
any page in a mapping is pinned. In order to prevent the situation of
userspace holding of filesystem operations indefinitely, disallow
'longterm' Filesystem-DAX mappings.
RDMA has the same conflict and the plan there is to add a 'with lease'
mechanism to allow the kernel to notify userspace that the mapping is
being torn down for block-map maintenance. Perhaps something similar can
be put in place for vfio.
Note that xfs and ext4 still report:
"DAX enabled. Warning: EXPERIMENTAL, use at your own risk"
...at mount time, and resolving the dax-dma-vs-truncate problem is one
of the last hurdles to remove that designation.
Acked-by: Alex Williamson <alex.williamson@redhat.com> Cc: Michal Hocko <mhocko@suse.com> Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> Reported-by: Haozhong Zhang <haozhong.zhang@intel.com> Tested-by: Haozhong Zhang <haozhong.zhang@intel.com> Fixes: b5e0a348f530 ("dax,ext2: replace XIP read and write with DAX I/O") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- Fix a crash when BIOS didn't assign a BAR and we try to enlarge it
(Christian König)
* tag 'pci-v4.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Allow release of resources that were never assigned
PCI: Update location of pci.ids file
Linus Torvalds [Fri, 2 Mar 2018 21:05:20 +0000 (13:05 -0800)]
Merge branch 'parisc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- a patch to change the ordering of cache and TLB flushes to hopefully
fix the random segfaults we very rarely face (by Dave Anglin).
- a patch to hide the virtual kernel memory layout due to security
reasons.
- two small patches to make the kernel run more smoothly under qemu.
* 'parisc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Reduce irq overhead when run in qemu
parisc: Use cr16 interval timers unconditionally on qemu
parisc: Check if secondary CPUs want own PDC calls
parisc: Hide virtual kernel memory layout
parisc: Fix ordering of cache and TLB flushes
Linus Torvalds [Fri, 2 Mar 2018 18:19:57 +0000 (10:19 -0800)]
Merge tag 'for-linus-4.16a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Five minor fixes for Xen-specific drivers"
* tag 'for-linus-4.16a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
pvcalls-front: 64-bit align flags
x86/xen: add tty0 and hvc0 as preferred consoles for dom0
xen-netfront: Fix hang on device removal
xen/pirq: fix error path cleanup when binding MSIs
xen/pvcalls: fix null pointer dereference on map->sock
Linus Torvalds [Fri, 2 Mar 2018 18:05:10 +0000 (10:05 -0800)]
Merge tag 'ceph-for-4.16-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A cap handling fix from Zhi that ensures that metadata writeback isn't
delayed and three error path memory leak fixups from Chengguang"
* tag 'ceph-for-4.16-rc4' of git://github.com/ceph/ceph-client:
ceph: fix potential memory leak in init_caches()
ceph: fix dentry leak when failing to init debugfs
libceph, ceph: avoid memory leak when specifying same option several times
ceph: flush dirty caps of unlinked inode ASAP
Linus Torvalds [Fri, 2 Mar 2018 17:35:36 +0000 (09:35 -0800)]
Merge tag 'for-linus-20180302' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes for this series. This is a little larger than
usual at this time, but that's mainly because I was out on vacation
last week. Nothing in here is major in any way, it's just two weeks of
fixes. This contains:
- NVMe pull from Keith, with a set of fixes from the usual suspects.
- mq-deadline zone unlock fix from Damien, fixing an issue with the
SMR zone locking added for 4.16.
- two bcache fixes sent in by Michael, with changes from Coly and
Tang.
- comment typo fix from Eric for blktrace.
- return-value error handling fix for nbd, from Gustavo.
- fix a direct-io case where we don't defer to a completion handler,
making us sleep from IRQ device completion. From Jan.
- a small series from Jan fixing up holes around handling of bdev
references.
- small set of regression fixes from Jiufei, mostly fixing problems
around the gendisk pointer -> partition index change.
- regression fix from Ming, fixing a boundary issue with the discard
page cache invalidation.
- two-patch series from Ming, fixing both a core blk-mq-sched and
kyber issue around token freeing on a requeue condition"
* tag 'for-linus-20180302' of git://git.kernel.dk/linux-block: (24 commits)
block: fix a typo
block: display the correct diskname for bio
block: fix the count of PGPGOUT for WRITE_SAME
mq-deadline: Make sure to always unlock zones
nvmet: fix PSDT field check in command format
nvme-multipath: fix sysfs dangerously created links
nbd: fix return value in error handling path
bcache: fix kcrashes with fio in RAID5 backend dev
bcache: correct flash only vols (check all uuids)
blktrace_api.h: fix comment for struct blk_user_trace_setup
blockdev: Avoid two active bdev inodes for one device
genhd: Fix BUG in blkdev_open()
genhd: Fix use after free in __blkdev_get()
genhd: Add helper put_disk_and_module()
genhd: Rename get_disk() to get_disk_and_module()
genhd: Fix leaked module reference for NVME devices
direct-io: Fix sleep in atomic due to sync AIO
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
block: kyber: fix domain token leak during requeue
blk-mq: don't call io sched's .requeue_request when requeueing rq to ->dispatch
...
Linus Torvalds [Fri, 2 Mar 2018 16:44:11 +0000 (08:44 -0800)]
Merge tag 'mmc-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- mmc: core: Avoid hang when claiming host
MMC host:
- dw_mmc: Avoid hang when accessing registers
- dw_mmc: Fix out-of-bounds access for slot's caps
- dw_mmc-k3: Fix out-of-bounds access through DT alias
- sdhci-pci: Fix S0i3 for Intel BYT-based controllers"
* tag 'mmc-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Avoid hanging to claim host for mmc via some nested calls
mmc: dw_mmc: Avoid accessing registers in runtime suspended state
mmc: dw_mmc: Fix out-of-bounds access for slot's caps
mmc: dw_mmc: Factor out dw_mci_init_slot_caps
mmc: dw_mmc-k3: Fix out-of-bounds access through DT alias
mmc: sdhci-pci: Fix S0i3 for Intel BYT-based controllers
Linus Torvalds [Fri, 2 Mar 2018 16:17:49 +0000 (08:17 -0800)]
Merge tag 'pm-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in cpufreq drivers: one recent regression, one
leftover Kconfig dependency and one old but "stable" material.
Specifics:
- Make the task scheduler load and utilization signals be
frequency-invariant again after recent changes in the SCPI cpufreq
driver (Dietmar Eggemann).
- Drop an unnecessary leftover Kconfig dependency from the SCPI
cpufreq driver (Sudeep Holla).
- Fix the initialization of the s3c24xx cpufreq driver (Viresh
Kumar)"
* tag 'pm-4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()
cpufreq: scpi: Fix incorrect arm_big_little config dependency
cpufreq: scpi: invoke frequency-invariance setter function
Helge Deller [Mon, 12 Feb 2018 20:43:55 +0000 (21:43 +0100)]
parisc: Reduce irq overhead when run in qemu
When run under QEMU, calling mfctl(16) creates some overhead because the
qemu timer has to be scaled and moved into the register. This patch
reduces the number of calls to mfctl(16) by moving the calls out of the
loops.
Additionally, increase the minimal time interval to 8000 cycles instead
of 500 to compensate possible QEMU delays when delivering interrupts.
Helge Deller [Fri, 12 Jan 2018 21:51:22 +0000 (22:51 +0100)]
parisc: Check if secondary CPUs want own PDC calls
The architecture specification says (for 64-bit systems): PDC is a per
processor resource, and operating system software must be prepared to
manage separate pointers to PDCE_PROC for each processor. The address
of PDCE_PROC for the monarch processor is stored in the Page Zero
location MEM_PDC. The address of PDCE_PROC for each non-monarch
processor is passed in gr26 when PDCE_RESET invokes OS_RENDEZ.
Currently we still use one PDC for all CPUs, but in case we face a
machine which is following the specification let's warn about it.
The change to flush_kernel_vmap_range() wasn't sufficient to avoid the
SMP stalls. The problem is some drivers call these routines with
interrupts disabled. Interrupts need to be enabled for flush_tlb_all()
and flush_cache_all() to work. This version adds checks to ensure
interrupts are not disabled before calling routines that need IPI
interrupts. When interrupts are disabled, we now drop into slower code.
The attached change fixes the ordering of cache and TLB flushes in
several cases. When we flush the cache using the existing PTE/TLB
entries, we need to flush the TLB after doing the cache flush. We don't
need to do this when we flush the entire instruction and data caches as
these flushes don't use the existing TLB entries. The same is true for
tmpalias region flushes.
The flush_kernel_vmap_range() and invalidate_kernel_vmap_range()
routines have been updated.
Secondly, we added a new purge_kernel_dcache_range_asm() routine to
pacache.S and use it in invalidate_kernel_vmap_range(). Nominally,
purges are faster than flushes as the cache lines don't have to be
written back to memory.
Hopefully, this is sufficient to resolve the remaining problems due to
cache speculation. So far, testing indicates that this is the case. I
did work up a patch using tmpalias flushes, but there is a performance
hit because we need the physical address for each page, and we also need
to sequence access to the tmpalias flush code. This increases the
probability of stalls.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Helge Deller <deller@gmx.de>
Masahiro Yamada [Fri, 16 Feb 2018 18:38:32 +0000 (03:38 +0900)]
kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
The 'defconfig_list' is a weird attribute. If the '.config' is
missing, conf_read_simple() iterates over all visible defaults,
then it uses the first one for which fopen() succeeds.
However, like other symbols, the first visible default is always
written out to the .config file. This might be different from what
has been actually used.
For example, on my machine, the third one "/boot/config-$UNAME_RELEASE"
is opened, like follows:
$ rm .config
$ make oldconfig 2>/dev/null
scripts/kconfig/conf --oldconfig Kconfig
#
# using defaults found in /boot/config-4.4.0-112-generic
#
*
* Restart config...
*
*
* IRQ subsystem
*
Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW)
However, the resulted .config file contains the first one since it is
visible:
Linus Torvalds [Thu, 1 Mar 2018 23:56:15 +0000 (15:56 -0800)]
Merge tag 'drm-fixes-for-v4.16-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Pretty much run of the mill drm fixes.
amdgpu:
- power management fixes
- some display fixes
- one ppc 32-bit dma fix
i915:
- two display fixes
- three gem fixes
sun4i:
- display regression fixes
nouveau:
- display regression fix
virtio-gpu:
- dumb airlied ioctl fix"
* tag 'drm-fixes-for-v4.16-rc4' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm/amdgpu: skip ECC for SRIOV in gmc late_init
drm/amd/amdgpu: Correct VRAM width for APUs with GMC9
drm/amdgpu: fix&cleanups for wb_clear
drm/amdgpu: Correct sdma_v4 get_wptr(v2)
drm/amd/powerplay: fix power over limit on Fiji
drm/amdgpu:Fixed wrong emit frame size for enc
drm/amdgpu: move WB_FREE to correct place
drm/amdgpu: only flush hotplug work without DC
drm/amd/display: check for ipp before calling cursor operations
drm/i915: Make global seqno known in i915_gem_request_execute tracepoint
drm/i915: Clear the in-use marker on execbuf failure
drm/i915/cnl: Fix PORT_TX_DW5/7 register address
drm/i915/audio: fix check for av_enc_map overflow
drm/i915: Fix rsvd2 mask when out-fence is returned
virtio-gpu: fix ioctl and expose the fixed status to userspace.
drm/sun4i: Protect the TCON pixel clocks
drm/sun4i: Enable the output on the pins (tcon0)
drm/nouveau: prefer XBGR2101010 for addfb ioctl
drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE
drm/amd/display: VGA black screen from s3 when attached to hook
...
Linus Torvalds [Thu, 1 Mar 2018 22:32:23 +0000 (14:32 -0800)]
Merge tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- MCIP aka ARconnect fixes for SMP builds [Euginey]
- preventive fix for SLC (L2 cache) flushing [Euginey]
- Kconfig default fix [Ulf Magnusson]
- trailing semicolon fixes [Luis de Bethencourt]
- other assorted minor fixes
* tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: setup cpu possible mask according to possible-cpus dts property
ARC: mcip: update MCIP debug mask when the new cpu came online
ARC: mcip: halt GFRC counter when ARC cores halt
ARCv2: boot log: fix HS48 release number
arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ARC: boot log: Fix trailing semicolon
ARC: dw2 unwind: Fix trailing semicolon
ARC: Enable fatal signals on boot for dev platforms
ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction
ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
Wanpeng Li [Wed, 28 Feb 2018 06:03:31 +0000 (14:03 +0800)]
KVM: X86: Allow userspace to define the microcode version
Linux (among the others) has checks to make sure that certain features
aren't enabled on a certain family/model/stepping if the microcode version
isn't greater than or equal to a known good version.
By exposing the real microcode version, we're preventing buggy guests that
don't check that they are running virtualized (i.e., they should trust the
hypervisor) from disabling features that are effectively not buggy.
Suggested-by: Filippo Sironi <sironi@amazon.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Linus Torvalds [Thu, 1 Mar 2018 18:50:01 +0000 (10:50 -0800)]
Merge tag 'platform-drivers-x86-v4.16-5' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform drivers fixes from Andy Shevchenko:
- fix a regression on laptops like Dell XPS 9360 where keyboard stopped
working.
- correct sysfs wakeup attribute after removal of some drivers to
reflect that they are not able to wake system up anymore.
* tag 'platform-drivers-x86-v4.16-5' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: wmi: Fix misuse of vsprintf extension %pULL
platform/x86: intel-hid: Reset wakeup capable flag on removal
platform/x86: intel-vbtn: Reset wakeup capable flag on removal
platform/x86: intel-vbtn: Only activate tablet mode switch on 2-in-1's
Linus Torvalds [Thu, 1 Mar 2018 18:06:39 +0000 (10:06 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk fix from Petr Mladek:
"Make sure that we wake up userspace loggers. This fixes a race
introduced by the console waiter logic during this merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: Wake klogd when passing console_lock owner
Tom Lendacky [Fri, 23 Feb 2018 23:18:20 +0000 (00:18 +0100)]
KVM: SVM: Add MSR-based feature support for serializing LFENCE
In order to determine if LFENCE is a serializing instruction on AMD
processors, MSR 0xc0011029 (MSR_F10H_DECFG) must be read and the state
of bit 1 checked. This patch will add support to allow a guest to
properly make this determination.
Add the MSR feature callback operation to svm.c and add MSR 0xc0011029
to the list of MSR-based features. If LFENCE is serializing, then the
feature is supported, allowing the hypervisor to set the value of the
MSR that guest will see. Support is also added to write (hypervisor only)
and read the MSR value for the guest. A write by the guest will result in
a #GP. A read by the guest will return the value as set by the host. In
this way, the support to expose the feature to the guest is controlled by
the hypervisor.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Tom Lendacky [Wed, 21 Feb 2018 19:39:51 +0000 (13:39 -0600)]
KVM: x86: Add a framework for supporting MSR-based features
Provide a new KVM capability that allows bits within MSRs to be recognized
as features. Two new ioctls are added to the /dev/kvm ioctl routine to
retrieve the list of these MSRs and then retrieve their values. A kvm_x86_ops
callback is used to determine support for the listed MSR-based features.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Tweaked documentation. - Radim] Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Linus Torvalds [Thu, 1 Mar 2018 16:17:01 +0000 (08:17 -0800)]
Merge tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Fix up device tree properties readout caused by my own refactorings"
* tag 'gpio-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Handle deferred probing in of_find_gpio() properly
gpiolib: Keep returning EPROBE_DEFER when we should
Jiufei Xue [Tue, 27 Feb 2018 12:10:18 +0000 (20:10 +0800)]
block: display the correct diskname for bio
bio_devname use __bdevname to display the device name, and can
only show the major and minor of the part0,
Fix this by using disk_name to display the correct name.
Fixes: 0983b7ab3db2 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Wed, 28 Feb 2018 17:35:29 +0000 (09:35 -0800)]
mq-deadline: Make sure to always unlock zones
In case of a failed write request (all retries failed) and when using
libata, the SCSI error handler calls scsi_finish_command(). In the
case of blk-mq this means that scsi_mq_done() does not get called,
that blk_mq_complete_request() does not get called and also that the
mq-deadline .completed_request() method is not called. This results in
the target zone of the failed write request being left in a locked
state, preventing that any new write requests are issued to the same
zone.
Fix this by replacing the .completed_request() method with the
.finish_request() method as this method is always called whether or
not a request completes successfully. Since the .finish_request()
method is only called by the blk-mq core if a .prepare_request()
method exists, add a dummy .prepare_request() method.
Fixes: 508fa31b279c ("mq-deadline: Introduce zone locking support") Cc: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
[ bvanassche: edited patch description ] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
kbuild: disable sparse warnings about unknown attributes
Currently, sparse issues warnings on code using an attribute
it doesn't know about.
One of the problem with this is that these warnings have no
value for the developer, it's just noise for him. At best these
warnings tell something about some deficiencies of sparse itself
but not about a potential problem with code analyzed.
A second problem with this is that sparse release are, alas,
less frequent than new attributes are added to GCC.
So, avoid the noise by asking sparse to not warn about
attributes it doesn't know about.
Reference: https://marc.info/?l=linux-sparse&m=151871600016790
Reference: https://marc.info/?l=linux-sparse&m=151871725417322 Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Ulf Magnusson [Tue, 13 Feb 2018 07:58:20 +0000 (08:58 +0100)]
Makefile: Fix lying comment re. silentoldconfig
The comment above the silentoldconfig invocation is outdated.
'make oldconfig' updates just .config and doesn't touch the
include/config/ tree.
This came up in https://lkml.org/lkml/2018/2/12/415.
While fixing the comment, make it more informative by explaining the
purpose of the unfortunately named silentoldconfig.
I can't make sense of the comment re. auto.conf.cmd and a cleaned tree.
include/config/auto.conf and include/config/auto.conf.cmd are both
created simultaneously by silentoldconfig (in
scripts/kconfig/confdata.c, by conf_write_autoconf()), and nothing seems
to remove auto.conf.cmd that wouldn't remove auto.conf. Remove that part
of the comment rather than blindly copying it. It might be a leftover
from an older way of doing things.
The include/config/auto.conf.cmd prerequisite might be there to ensure
that silentoldconfig gets rerun if conf_write_autoconf() fails between
writing out auto.conf.cmd and auto.conf (a comment in the function
indicates that auto.conf is deliberately written out last to mark
completion of the operation). It seems the Makefile dependency between
include/config/auto.conf and .config would already take care of that
though, since include/config/auto.conf would still be out of date re.
.config if the operation fails.
Filipe Manana [Wed, 28 Feb 2018 15:56:10 +0000 (15:56 +0000)]
Btrfs: fix log replay failure after unlink and link combination
If we have a file with 2 (or more) hard links in the same directory,
remove one of the hard links, create a new file (or link an existing file)
in the same directory with the name of the removed hard link, and then
finally fsync the new file, we end up with a log that fails to replay,
causing a mount failure.
This happens because the log has inode reference items for both inode 258
(the first file we created) and inode 259 (the second file created), and
when processing the reference item for inode 258, we replace the
corresponding item in the subvolume tree (which has two names, "foo" and
"bar") witht he one in the log (which only has one name, "foo") without
removing the corresponding dir index keys from the parent directory.
Later, when processing the inode reference item for inode 259, which has
a name of "bar" associated to it, we notice that dir index entries exist
for that name and for a different inode, so we attempt to unlink that
name, which fails because the inode reference item for inode 258 no longer
has the name "bar" associated to it, making a call to btrfs_unlink_inode()
fail with a -ENOENT error.
Fix this by unlinking all the names in an inode reference item from a
subvolume tree that are not present in the inode reference item found in
the log tree, before overwriting it with the item from the log tree.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
projects / kernel.git / log