Link: https://lkml.kernel.org/r/20211116131112.508304-1-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc/vmcore: don't fake reading zeroes on surprise vmcore_cb unregistration
In commit 7517eb32f923 ("proc/vmcore: convert oldmem_pfn_is_ram callback
to more generic vmcore callbacks"), we added detection of surprise
vmcore_cb unregistration after the vmcore was already opened. Once
detected, we warn the user and simulate reading zeroes from that point
on when accessing the vmcore.
The basic reason was that unexpected unregistration, for example, by
manually unbinding a driver from a device after opening the vmcore, is
not supported and could result in reading oldmem the vmcore_cb would
have actually prohibited while registered. However, something like that
can similarly be trigger by a user that's really looking for trouble
simply by unbinding the relevant driver before opening the vmcore -- or
by disallowing loading the driver in the first place. So it's actually
of limited help.
Currently, unregistration can only be triggered via virtio-mem when
manually unbinding the driver from the device inside the VM; there is no
way to trigger it from the hypervisor, as hypervisors don't allow for
unplugging virtio-mem devices -- ripping out system RAM from a VM
without coordination with the guest is usually not a good idea.
The important part is that unbinding the driver and unregistering the
vmcore_cb while concurrently reading the vmcore won't crash the system,
and that is handled by the rwsem.
To make the mechanism more future proof, let's remove the "read zero"
part, but leave the warning in place. For example, we could have a
future driver (like virtio-balloon) that will contact the hypervisor to
figure out if we already populated a page for a given PFN.
Hotunplugging such a device and consequently unregistering the vmcore_cb
could be triggered from the hypervisor without harming the system even
while kdump is running. In that case, we don't want to silently end up
with a vmcore that contains wrong data, because the user inside the VM
might be unaware of the hypervisor action and might easily miss the
warning in the log.
Link: https://lkml.kernel.org/r/20211111192243.22002-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Philipp Rudo <prudo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kefeng Wang [Thu, 20 Jan 2022 02:07:53 +0000 (18:07 -0800)]
mm: percpu: add generic pcpu_populate_pte() function
With NEED_PER_CPU_PAGE_FIRST_CHUNK enabled, we need a function to
populate pte, this patch adds a generic pcpu populate pte function,
pcpu_populate_pte(), which is marked __weak and used on most
architectures, but it is overridden on x86, which has its own
implementation.
Link: https://lkml.kernel.org/r/20211216112359.103822-5-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the previous patch, we could add a generic pcpu first chunk
allocate and free function to cleanup the duplicated definations on each
architecture.
Link: https://lkml.kernel.org/r/20211216112359.103822-4-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kefeng Wang [Thu, 20 Jan 2022 02:07:45 +0000 (18:07 -0800)]
mm: percpu: add pcpu_fc_cpu_to_node_fn_t typedef
Add pcpu_fc_cpu_to_node_fn_t and pass it into pcpu_fc_alloc_fn_t, pcpu
first chunk allocation will call it to alloc memblock on the
corresponding node by it, this is prepare for the next patch.
Link: https://lkml.kernel.org/r/20211216112359.103822-3-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Dennis Zhou <dennis@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Lameter <cl@linux.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kefeng Wang [Thu, 20 Jan 2022 02:07:41 +0000 (18:07 -0800)]
mm: percpu: generalize percpu related config
Patch series "mm: percpu: Cleanup percpu first chunk function".
When supporting page mapping percpu first chunk allocator on arm64, we
found there are lots of duplicated codes in percpu embed/page first chunk
allocator. This patchset is aimed to cleanup them and should no function
change.
The currently supported status about 'embed' and 'page' in Archs shows
below,
The pcpu_fc_alloc_fn_t/pcpu_fc_free_fn_t is killed, we provide generic
pcpu_fc_alloc() and pcpu_fc_free() function, which are called in the
pcpu_embed/page_first_chunk().
1) For pcpu_embed_first_chunk(), pcpu_fc_cpu_to_node_fn_t is needed to be
provided when archs supported NUMA.
2) For pcpu_page_first_chunk(), the pcpu_fc_populate_pte_fn_t is killed too,
a generic pcpu_populate_pte() which marked '__weak' is provided, if you
need a different function to populate pte on the arch(like x86), please
provide its own implementation.
The HAVE_SETUP_PER_CPU_AREA/NEED_PER_CPU_EMBED_FIRST_CHUNK/
NEED_PER_CPU_PAGE_FIRST_CHUNK/USE_PERCPU_NUMA_NODE_ID configs, which have
duplicate definitions on platforms that subscribe it.
Move them into mm, drop these redundant definitions and instead just
select it on applicable platforms.
Link: https://lkml.kernel.org/r/20211216112359.103822-1-wangkefeng.wang@huawei.com Link: https://lkml.kernel.org/r/20211216112359.103822-2-wangkefeng.wang@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Will Deacon <will@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 9 Jan 2022 18:49:12 +0000 (10:49 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fix from Dmitry Torokhov:
"A small fixup to the Zinitix touchscreen driver to avoid enabling the
IRQ line before we successfully requested it"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: zinitix - make sure the IRQ is allocated before it gets enabled
Linus Torvalds [Sun, 9 Jan 2022 18:43:16 +0000 (10:43 -0800)]
Merge tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fix from Olof Johansson:
"One more fix for 5.16
I had missed one patch when I sent up what I thought was the last
batch of fixes for this release. This one fixes issues on the
Raspberry Pi platforms due to gpio init changes this release, so
hopefully we can get it merged before final release is cut"
* tag 'soc-fixes-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: gpio-ranges property is now required
Linus Torvalds [Sun, 9 Jan 2022 18:37:07 +0000 (10:37 -0800)]
Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert "libtraceevent: Increase libtraceevent logging when verbose",
breaks the build with libtraceevent-1.3.0, i.e. when building with
'LIBTRACEEVENT_DYNAMIC=1'.
- Avoid early exit in 'perf trace' due to running SIGCHLD handler
before it makes sense to. It can happen when using a BPF source code
event that have to be first built into an object file.
* tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
Revert "libtraceevent: Increase libtraceevent logging when verbose"
perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
Nikita Travkin [Sun, 9 Jan 2022 07:19:19 +0000 (23:19 -0800)]
Input: zinitix - make sure the IRQ is allocated before it gets enabled
Since irq request is the last thing in the driver probe, it happens
later than the input device registration. This means that there is a
small time window where if the open method is called the driver will
attempt to enable not yet available irq.
Fix that by moving the irq request before the input device registration.
Phil Elwell [Tue, 4 Jan 2022 17:02:47 +0000 (18:02 +0100)]
ARM: dts: gpio-ranges property is now required
Since [1], added in 5.7, the absence of a gpio-ranges property has
prevented GPIOs from being restored to inputs when released.
Add those properties for BCM283x and BCM2711 devices.
[1] commit 7e6393e4f9f0 ("gpio: Support GPIO controllers without
pin-ranges")
Link: https://lore.kernel.org/r/20220104170247.956760-1-linus.walleij@linaro.org Fixes: 7e6393e4f9f0 ("gpio: Support GPIO controllers without pin-ranges") Fixes: 312d32a815ce ("pinctrl: bcm2835: Change init order for gpio hogs") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211206092237.4105895-3-phil@raspberrypi.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Sat, 8 Jan 2022 20:12:58 +0000 (12:12 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Fix the regression with AMD GPU suspend by reverting the
handling of bus regulators in the I2C core.
Also, there is a fix for the MPC driver to prevent an
out-of-bound-access"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Revert "i2c: core: support bus regulator controlling in adapter"
i2c: mpc: Avoid out of bounds memory access
Linus Torvalds [Sat, 8 Jan 2022 19:39:53 +0000 (11:39 -0800)]
Merge tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
"Three fixes for the 5.16 cycle:
- Avoid going beyond last capacity in the power-supply core
- Replace 1E6L with NSEC_PER_MSEC to avoid floating point calculation
in LLVM resulting in a build failure
- Fix ADC measurements in bq25890 charger driver"
* tag 'for-v5.16-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: reset: ltc2952: Fix use of floating point literals
power: bq25890: Enable continuous conversion for ADC at charging
power: supply: core: Break capacity loop
Linus Torvalds [Fri, 7 Jan 2022 23:58:06 +0000 (15:58 -0800)]
Merge branch 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"This contains the cgroup.procs permission check fixes so that they use
the credentials at the time of open rather than write, which also
fixes the cgroup namespace lifetime bug"
* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
selftests: cgroup: Test open-time cgroup namespace usage for migration checks
selftests: cgroup: Test open-time credential usage for migration checks
selftests: cgroup: Make cg_create() use 0755 for permission instead of 0644
cgroup: Use open-time cgroup namespace for process migration perm checks
cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
cgroup: Use open-time credentials for process migraton perm checks
Wolfram Sang [Thu, 6 Jan 2022 12:24:52 +0000 (13:24 +0100)]
Revert "i2c: core: support bus regulator controlling in adapter"
This largely reverts commit e73669244f65eb63686d89331136470fd8df1c7b. It
breaks suspend with AMD GPUs, and we couldn't incrementally fix it. So,
let's remove the code and go back to the drawing board. We keep the
header extension to not break drivers already populating the regulator.
We expect to re-add the code handling it soon.
This breaks the build as it will prefer using libbpf-devel header files,
even when not using LIBBPF_DYNAMIC=1, breaking the build.
This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0,
as described by Jiri Slaby:
=======================================================================
It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0:
> util/debug.c: In function ‘perf_debug_option’:
> util/debug.c:243:17: error: implicit declaration of function
‘tep_set_loglevel’ [-Werror=implicit-function-declaration]
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~~~~~
> util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this
function); did you mean ‘TEP_PRINT_INFO’?
> 243 | tep_set_loglevel(TEP_LOG_INFO);
> | ^~~~~~~~~~~~
> | TEP_PRINT_INFO
> util/debug.c:243:34: note: each undeclared identifier is reported only once
for each function it appears in
> util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this
function)
> 245 | tep_set_loglevel(TEP_LOG_DEBUG);
> | ^~~~~~~~~~~~~
> util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this
function)
> 247 | tep_set_loglevel(TEP_LOG_ALL);
> | ^~~~~~~~~~~
It is because the gcc's command line looks like:
gcc
...
-I/home/abuild/rpmbuild/BUILD/tools/lib/
...
-DLIBTRACEEVENT_VERSION=65790
...
=======================================================================
The proper way to fix this is more involved and so not suitable for this
late in the 5.16-rc stage.
the event parsing eventually calls llvm__get_kbuild_opts() that runs a
script and that ends up with SIGCHLD delivered to the 'perf trace'
handler, which assumes the workload process is done and quits 'perf
trace'.
Move the SIGCHLD handler setup directly to trace__run(), where the event
is parsed and the object is already compiled.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Christy Lee <christyc.y.lee@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 7 Jan 2022 17:17:53 +0000 (09:17 -0800)]
Merge tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"There is only the amdgpu runtime pm regression fix in here:
amdgpu:
- suspend/resume fix
- fix runtime PM regression"
* tag 'drm-fixes-2022-01-07' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable runpm if we are the primary adapter
fbdev: fbmem: add a helper to determine if an aperture is used by a fw fb
drm/amd/pm: keep the BACO feature enabled for suspend
Linus Torvalds [Fri, 7 Jan 2022 02:35:17 +0000 (18:35 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Last pull for 5.16, the reversion has been known for a while now but
didn't get a proper fix in time. Looks like we will have several
info-leak bugs to take care of going foward.
- Revert the patch fixing the DM related crash causing a widespread
regression for kernel ULPs. A proper fix just didn't appear this
cycle due to the holidays
- Missing NULL check on alloc in uverbs
- Double free in rxe error paths
- Fix a new kernel-infoleak report when forming ah_attr's without
GRH's in ucma"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Don't infoleak GRH fields
RDMA/uverbs: Check for null return of kmalloc_array
Revert "RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow"
RDMA/rxe: Prevent double freeing rxe_map_set()
Linus Torvalds [Thu, 6 Jan 2022 23:00:43 +0000 (15:00 -0800)]
Merge tag 'trace-v5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Three minor tracing fixes:
- Fix missing prototypes in sample module for direct functions
- Fix check of valid buffer in get_trace_buf()
- Fix annotations of percpu pointers"
* tag 'trace-v5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Tag trace_percpu_buffer as a percpu pointer
tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()
ftrace/samples: Add missing prototypes direct functions
Tejun Heo [Thu, 6 Jan 2022 21:02:29 +0000 (11:02 -1000)]
cgroup: Use open-time cgroup namespace for process migration perm checks
cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's cgroup namespace which is
a potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.
This patch makes cgroup remember the cgroup namespace at the time of open
and uses it for migration permission checks instad of current's. Note that
this only applies to cgroup2 as cgroup1 doesn't have namespace support.
This also fixes a use-after-free bug on cgroupns reported in
Tejun Heo [Thu, 6 Jan 2022 21:02:29 +0000 (11:02 -1000)]
cgroup: Allocate cgroup_file_ctx for kernfs_open_file->priv
of->priv is currently used by each interface file implementation to store
private information. This patch collects the current two private data usages
into struct cgroup_file_ctx which is allocated and freed by the common path.
This allows generic private data which applies to multiple files, which will
be used to in the following patch.
Note that cgroup_procs iterator is now embedded as procs.iter in the new
cgroup_file_ctx so that it doesn't need to be allocated and freed
separately.
v2: union dropped from cgroup_file_ctx and the procs iterator is embedded in
cgroup_file_ctx as suggested by Linus.
v3: Michal pointed out that cgroup1's procs pidlist uses of->priv too.
Converted. Didn't change to embedded allocation as cgroup1 pidlists get
stored for caching.
Tejun Heo [Thu, 6 Jan 2022 21:02:28 +0000 (11:02 -1000)]
cgroup: Use open-time credentials for process migraton perm checks
cgroup process migration permission checks are performed at write time as
whether a given operation is allowed or not is dependent on the content of
the write - the PID. This currently uses current's credentials which is a
potential security weakness as it may allow scenarios where a less
privileged process tricks a more privileged one into writing into a fd that
it created.
This patch makes both cgroup2 and cgroup1 process migration interfaces to
use the credentials saved at the time of open (file->f_cred) instead of
current's.
Reported-by: "Eric W. Biederman" <ebiederm@xmission.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Fixes: 025979bc8fa2 ("cgroup: require write perm on common ancestor when moving processes on the default hierarchy") Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
This happened because we would overrun the i2c->msgs array on the final
interrupt for the I2C STOP. This didn't happen if the last message was a
read because there is no interrupt in that case. Ensure that we only
access the current message if we are not processing a I2C STOP
condition.
Fixes: 4a1b33014624 ("i2c: mpc: Interrupt driven transfer") Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org>
Olof Johansson [Thu, 6 Jan 2022 00:18:44 +0000 (16:18 -0800)]
Merge tag 'socfpga_fix_for_v5.16_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA dts updates for v5.16, part 3
- Change the SoCFPGA compatible to "intel,socfpga-qspi"
- Update dt-bindings document to include "intel,socfpga-qspi"
* tag 'socfpga_fix_for_v5.16_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (361 commits)
ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"
dt-bindings: spi: cadence-quadspi: document "intel,socfpga-qspi"
Linux 5.16-rc7
mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page()
mm/damon/dbgfs: protect targets destructions with kdamond_lock
mm/page_alloc: fix __alloc_size attribute for alloc_pages_exact_nid
mm: delete unsafe BUG from page_cache_add_speculative()
mm, hwpoison: fix condition in free hugetlb page path
MAINTAINERS: mark more list instances as moderated
kernel/crash_core: suppress unknown crashkernel parameter warning
mm: mempolicy: fix THP allocations escaping mempolicy restrictions
kfence: fix memory leak when cat kfence objects
platform/x86: intel_pmc_core: fix memleak on registration failure
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
r8152: sync ocp base
r8152: fix the force speed doesn't work for RTL8156
net: bridge: fix ioctl old_deviceless bridge argument
net: stmmac: ptp: fix potentially overflowing expression
net: dsa: tag_ocelot: use traffic class to map priority on injected header
veth: ensure skb entering GRO are not cloned.
...
osnoise tracer on ppc64le is triggering osnoise_taint() for negative
duration in get_int_safe_duration() called from
trace_sched_switch_callback()->thread_exit().
The problem though is that the check for a valid trace_percpu_buffer is
incorrect in get_trace_buf(). The check is being done after calculating
the pointer for the current cpu, rather than on the main percpu pointer.
Fix the check to be against trace_percpu_buffer.
Jiri Olsa [Sun, 19 Dec 2021 13:53:17 +0000 (14:53 +0100)]
ftrace/samples: Add missing prototypes direct functions
There's another compilation fail (first here [1]) reported by kernel
test robot for W=1 clang build:
>> samples/ftrace/ftrace-direct-multi-modify.c:7:6: warning: no previous
prototype for function 'my_direct_func1' [-Wmissing-prototypes]
void my_direct_func1(unsigned long ip)
Direct functions in ftrace direct sample modules need to have prototypes
defined. They are already global in order to be visible for the inline
assembly, so there's no problem.
The kernel test robot reported just error for ftrace-direct-multi-modify,
but I got same errors also for the rest of the modules touched by this patch.
[1] ad670fd31b9f ftrace/samples: Add missing prototype for my_direct_func
Link: https://lkml.kernel.org/r/20211219135317.212430-1-jolsa@kernel.org Reported-by: kernel test robot <lkp@intel.com> Fixes: 032508183d58 ("ftrace/samples: Add module to test multi direct modify interface") Fixes: 69d218f0c900 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Fixes: b9ae8768511b ("ftrace: Add another example of register_ftrace_direct() use case") Fixes: 24d7466d0f8f ("ftrace: Add sample module that uses register_ftrace_direct()") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Wed, 5 Jan 2022 22:08:56 +0000 (14:08 -0800)]
Merge tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
Local variable resp created at:
ucma_init_qp_attr+0xa4/0xb10 drivers/infiniband/core/ucma.c:1214
ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732
Bytes 40-59 of 144 are uninitialized
Memory access of size 144 starts at ffff888167523b00
Data copied to user address 0000000020000100
CPU: 1 PID: 25910 Comm: syz-executor.1 Not tainted 5.16.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================
Jiasheng Jiang [Fri, 31 Dec 2021 09:33:15 +0000 (17:33 +0800)]
RDMA/uverbs: Check for null return of kmalloc_array
Because of the possible failure of the allocation, data might be NULL
pointer and will cause the dereference of the NULL pointer later.
Therefore, it might be better to check it and return -ENOMEM.
Fixes: af0167666f4f ("RDMA/verbs: Store the write/write_ex uapi entry points in the uverbs_api") Link: https://lore.kernel.org/r/20211231093315.1917667-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds [Wed, 5 Jan 2022 17:30:10 +0000 (09:30 -0800)]
Merge tag 'gpio-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Here are two last fixes for this release cycle from the GPIO
subsystem:
- fix irq offset calculation in gpio-aspeed-sgpio
- update the MAINTAINERS entry for gpio-brcmstb"
* tag 'gpio-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update gpio-brcmstb maintainers
gpio: gpio-aspeed-sgpio: Fix wrong hwirq base in irq handler
Jakub Kicinski [Wed, 5 Jan 2022 17:00:11 +0000 (09:00 -0800)]
Merge tag 'ieee802154-for-net-2022-01-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-01-05
Below I have a last minute fix for the atusb driver.
Pavel fixes a KASAN uninit report for the driver. This version is the
minimal impact fix to ease backporting. A bigger rework of the driver to
avoid potential similar problems is ongoing and will come through net-next
when ready.
* tag 'ieee802154-for-net-2022-01-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
====================
David S. Miller [Wed, 5 Jan 2022 11:15:16 +0000 (11:15 +0000)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-01-04
This series contains updates to i40e and iavf drivers.
Mateusz adjusts displaying of failed VF MAC message when the failure is
expected as well as modifying an NVM info message to not confuse the user
for i40e.
Di Zhu fixes a use-after-free issue MAC filters for i40e.
Jedrzej fixes an issue with misreporting of Rx and Tx queues during
reinitialization for i40e.
Karen correct checking of channel queue configuration to occur against
active queues for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Habets [Sun, 2 Jan 2022 08:41:22 +0000 (08:41 +0000)]
sfc: The RX page_ring is optional
The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.
iavf: Fix limit of total number of queues to active queues of VF
In the absence of this validation, if the user requests to
configure queues more than the enabled queues, it results in
sending the requested number of queues to the kernel stack
(due to the asynchronous nature of VF response), in which
case the stack might pick a queue to transmit that is not
enabled and result in Tx hang. Fix this bug by
limiting the total number of queues allocated for VF to
active queues of VF.
Fixes: e3a3d208c68d ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Fix incorrect netdev's real number of RX/TX queues
There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.
Fixes: 79a154c5e3e8 ("i40e: main driver core") Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Fix for displaying message regarding NVM version
When loading the i40e driver, it prints a message like: 'The driver for the
device detected a newer version of the NVM image v1.x than expected v1.y.
Please install the most recent version of the network driver.' This is
misleading as the driver is working as expected.
Fix that by removing the second part of message and changing it from
dev_info to dev_dbg.
Fixes: 8b0ab96cab2d ("i40e: The driver now prints the API version in error message") Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Di Zhu [Mon, 29 Nov 2021 13:52:01 +0000 (19:52 +0600)]
i40e: fix use-after-free in i40e_sync_filters_subtask()
Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.
This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.
Previously it was not possible to send response with some error code
to VF without displaying opcode information.
Fixes: eb89ebf92394 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pavel Skripkin [Tue, 4 Jan 2022 18:28:06 +0000 (21:28 +0300)]
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().
Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.
Fail log:
BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
Fixes: 11c754c19e5e ("ieee802154: add support for atusb transceiver") Reported-by: Alexander Potapenko <glider@google.com> Acked-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Qiuxu Zhuo [Fri, 24 Dec 2021 09:11:26 +0000 (04:11 -0500)]
EDAC/i10nm: Release mdev/mbase when failing to detect HBM
On systems without HBM (High Bandwidth Memory) mdev/mbase are not
released/unmapped.
Add the code to release mdev/mbase when failing to detect HBM.
[Tony: re-word commit message]
Cc: <stable@vger.kernel.org> Fixes: 2f4151e241c9 ("EDAC/i10nm: Add support for high bandwidth memory") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20211224091126.1246-1-qiuxu.zhuo@intel.com
Jakub Kicinski [Tue, 4 Jan 2022 15:18:27 +0000 (07:18 -0800)]
Merge tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more changes:
- mac80211: initialize a variable to avoid using it uninitialized
- mac80211 mesh: put some data structures into the container to
fix bugs with and not have to deal with allocation failures
* tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
====================
Follow normal convection and put resource cleanup either in the error
unwind of the allocator, or the overall free function. Leave the object
unchanged with a NULL cur_map_set on failure and remove the unncessary
free in rxe_mr_init_user().
Pavel Skripkin [Thu, 30 Dec 2021 19:55:47 +0000 (22:55 +0300)]
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was
in mesh_paths and mpp_paths being NULL.
mesh_pathtbl_init() could fail in case of memory allocation failure, but
nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to
leaving 2 pointers as NULL. Syzbot has found null deref on exit path,
but it could happen anywhere else, because code assumes these pointers are
valid.
Since all ieee80211_*_setup_sdata functions are void and do not fail,
let's embedd mesh_paths and mpp_paths into parent struct to avoid
adding error handling on higher levels and follow the pattern of others
setup_sdata functions
Fixes: 0ef9e26daa10 ("mac80211: mesh: convert path table to rhashtable") Reported-and-tested-by: syzbot+860268315ba86ea6b96b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230195547.23977-1-paskripkin@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mlme.c:5332:7: warning: Branch condition evaluates to a
garbage value
have_higher_than_11mbit)
^~~~~~~~~~~~~~~~~~~~~~~
have_higher_than_11mbit is only set to true some of the time in
ieee80211_get_rates() but is checked all of the time. So
have_higher_than_11mbit needs to be initialized to false.
Fixes: a5ec26c7e553 ("mac80211: set basic rates earlier") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211223162848.3243702-1-trix@redhat.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Eric Dumazet [Tue, 4 Jan 2022 09:45:08 +0000 (01:45 -0800)]
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
tx_queue_len can be set to ~0U, we need to be more
careful about overflows.
__fls(0) is undefined, as this report shows:
UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24
shift exponent 51770272 is too large for 32-bit type 'int'
CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330
qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430
qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253
tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571
netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg net/socket.c:724 [inline]
____sys_sendmsg+0x5b9/0x910 net/socket.c:2409
___sys_sendmsg net/socket.c:2463 [inline]
__sys_sendmsg+0x280/0x370 net/socket.c:2492
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 6a4df64a0723 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This code used to copy in an unsigned long worth of data before
the sockptr_t conversion, so restore that.
Fixes: cf0058199c0b ("net: pass a sockptr_t into ->setsockopt") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 4 Jan 2022 12:17:35 +0000 (12:17 +0000)]
Merge branch 'srv6-traceroute'
Andrew Lunn says:
====================
Fix traceroute in the presence of SRv6
When using SRv6 the destination IP address in the IPv6 header is not
always the true destination, it can be a router along the path that
SRv6 is using.
When ICMP reports an error, e.g, time exceeded, which is what
traceroute uses, it included the packet which invoked the error into
the ICMP message body. Upon receiving such an ICMP packet, the
invoking packet is examined and an attempt is made to find the socket
which sent the packet, so the error can be reported. Lookup is
performed using the source and destination address. If the
intermediary router IP address from the IP header is used, the lookup
fails. It is necessary to dig into the header and find the true
destination address in the Segment Router header, SRH.
v2:
Play games with the skb->network_header rather than clone the skb
v3:
Move helpers into seg6.c
v4:
Move short helper into header file.
Rework getting SRH destination address
v5:
Fix comment to describe function, not caller
Patch 1 exports a helper which can find the SRH in a packet
Patch 2 does the actual examination of the invoking packet
Patch 3 makes use of the results when trying to find the socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 3 Jan 2022 17:11:32 +0000 (18:11 +0100)]
udp6: Use Segment Routing Header for dest address if present
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.
This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 3 Jan 2022 17:11:31 +0000 (18:11 +0100)]
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Mon, 3 Jan 2022 17:11:30 +0000 (18:11 +0100)]
seg6: export get_srh() for ICMP handling
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.
Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Tue, 4 Jan 2022 03:50:16 +0000 (19:50 -0800)]
Merge tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- avoid sending link-local multicast to multicast routers,
by Linus Lüssing
* tag 'batadv-net-pullrequest-20220103' of git://git.open-mesh.org/linux-merge:
batman-adv: mcast: don't send link-local multicast to mcast routers
====================
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
This reverts commit 5bd649166faf66557a5f63edb0dfa88089aa7a0e ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:
[ 5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY
[ 5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22
[ 5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY
[ 5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22
Fixes: 5bd649166faf ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
# no blocks recorded as out of sync on the remaining member disk1/loop11
root:# mdadm -X /dev/loop11 | grep Bitmap
Bitmap : 16 bits (chunks), 0 dirty (0.0%)
root:#
# re-add disk2, nothing synced because of empty bitmap
mdadm /dev/md10 --re-add /dev/loop12
# check integrity again
echo check > /sys/block/md10/md/sync_action
# disk1 and disk2 are no longer in sync, reads return differend data
root:# cat /sys/block/md10/md/mismatch_cnt
128
root:#
David Ahern [Mon, 3 Jan 2022 17:19:11 +0000 (10:19 -0700)]
ipv6: Continue processing multipath route even if gateway attribute is invalid
ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.
Fixes: 7eaa95c8311c ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern <dsahern@kernel.org> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Steven Lee [Tue, 14 Dec 2021 04:02:38 +0000 (12:02 +0800)]
gpio: gpio-aspeed-sgpio: Fix wrong hwirq base in irq handler
Each aspeed sgpio bank has 64 gpio pins(32 input pins and 32 output pins).
The hwirq base for each sgpio bank should be multiples of 64 rather than
multiples of 32.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
- Fix parsing of Intel PT VM time correlation arguments.
- Honour CPU filtering command line request of a script's switch events
in 'perf script'.
- Fix printing of switch events in Intel PT python script.
- Fix duplicate alias events list printing in 'perf list', noticed on
heterogeneous arm64 systems.
- Fix return value of ids__new(), users expect NULL for failure, not
ERR_PTR(-ENOMEM).
* tag 'perf-tools-fixes-for-v5.16-2022-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf top: Fix TUI exit screen refresh race condition
perf pmu: Fix alias events list
perf scripts python: intel-pt-events.py: Fix printing of switch events
perf script: Fix CPU filtering of a script's switch events
perf intel-pt: Fix parsing of VM time correlation arguments
perf expr: Fix return value of ids__new()
Markus Koch [Sun, 2 Jan 2022 16:54:08 +0000 (17:54 +0100)]
net/fsl: Remove leftover definition in xgmac_mdio
commit c740435d4913 ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in
the QorIQ mdio driver but left the (now unused) incorrect bit definition
for MDIO_DATA_BSY in the code. This commit removes it.
Signed-off-by: Markus Koch <markus@notsyncing.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 2 Jan 2022 18:36:09 +0000 (10:36 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Better input validation for compat ioctls and a documentation bugfix
for 5.16"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Docs: Fixes link to I2C specification
i2c: validate user data in compat ioctl
Thomas Toye [Sat, 1 Jan 2022 17:22:07 +0000 (18:22 +0100)]
rndis_host: support Hytera digital radios
Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.
This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").
This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858
To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.
Signed-off-by: Thomas Toye <thomas@toye.io> Signed-off-by: David S. Miller <davem@davemloft.net>
When the following command is executed several times, a coredump file is
generated.
$ timeout -k 9 5 perf top -e task-clock
*******
*******
*******
0.01% [kernel] [k] __do_softirq
0.01% libpthread-2.28.so [.] __pthread_mutex_lock
0.01% [kernel] [k] __ll_sc_atomic64_sub_return
double free or corruption (!prev) perf top --sort comm,dso
timeout: the monitored command dumped core
When we terminate "perf top" using sending signal method,
SLsmg_reset_smg() called. SLsmg_reset_smg() resets the SLsmg screen
management routines by freeing all memory allocated while it was active.
However SLsmg_reinit_smg() maybe be called by another thread.
SLsmg_reinit_smg() will free the same memory accessed by
SLsmg_reset_smg(), thus it results in a double free.
SLsmg_reinit_smg() is called already protected by ui__lock, so we fix
the problem by adding pthread_mutex_trylock of ui__lock when calling
SLsmg_reset_smg().
Signed-off-by: Wenyu Liu <liuwenyu7@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: wuxu.wu@huawei.com Link: http://lore.kernel.org/lkml/a91e3943-7ddc-f5c0-a7f5-360f073c20e6@huawei.com Signed-off-by: Hewenliang <hewenliang4@huawei.com> Signed-off-by: yaowenbin <yaowenbin1@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
John Garry [Tue, 21 Dec 2021 16:11:30 +0000 (00:11 +0800)]
perf pmu: Fix alias events list
Commit 161dcabbbadd3153 ("perf list: Display hybrid PMU events with cpu
type") changes the event list for uncore PMUs or arm64 heterogeneous CPU
systems, such that duplicate aliases are incorrectly listed per PMU
(which they should not be), like:
# perf list
...
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_es
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in E or S-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
unc_cbo_cache_lookup.any_i
[Unit: uncore_cbox L3 Lookup any request that access cache and found
line in I-state]
...
Notice how the events are listed twice.
The named commit changed how we remove duplicate events, in that events
for different PMUs are not treated as duplicates. I suppose this is to
handle how "Each hybrid pmu event has been assigned with a pmu name".
Fix PMU alias listing by restoring behaviour to remove duplicates for
non-hybrid PMUs.
Fixes: 161dcabbbadd3153 ("perf list: Display hybrid PMU events with cpu type") Signed-off-by: John Garry <john.garry@huawei.com> Tested-by: Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/1640103090-140490-1-git-send-email-john.garry@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Xin Long [Fri, 31 Dec 2021 23:37:37 +0000 (18:37 -0500)]
sctp: hold endpoint before calling cb in sctp_transport_lookup_process
The same fix in commit 2ab2940504bc ("sctp: use call_rcu to free endpoint")
is also needed for dumping one asoc and sock after the lookup.
Fixes: 2959b44e60ae ("sctp: ensure ep is not destroyed before doing the dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Fix error handling when calculating max IO queues number
The role of ena_calc_max_io_queue_num() is to return the number
of queues supported by the device, which means the return value
should be >=0.
The function that calls ena_calc_max_io_queue_num(), checks
the return value. If it is 0, it means the device reported
it supports 0 IO queues. This case is considered an error
and is handled by the calling function accordingly.
However the current implementation of ena_calc_max_io_queue_num()
is wrong, since when it detects the device supports 0 IO queues,
it returns -EFAULT.
In such a case the calling function doesn't detect the error,
and therefore doesn't handle it.
This commit changes ena_calc_max_io_queue_num() to return 0
in case the device reported it supports 0 queues, allowing the
calling function to properly handle the error case.
Fixes: 8fc00a835bc1 ("net: ena: make ethtool -l show correct max number of queues") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Fix wrong rx request id by resetting device
A wrong request id received from the device is a sign that
something is wrong with it, therefore trigger a device reset.
Also add some debug info to the "Page is NULL" print to make
it easier to debug.
Fixes: 42904aea461f ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ena: Fix undefined state when tx request id is out of bounds
ena_com_tx_comp_req_id_get() checks the req_id of a received completion,
and if it is out of bounds returns -EINVAL. This is a sign that
something is wrong with the device and it needs to be reset.
The current code does not reset the device in this case, which leaves
the driver in an undefined state, where this completion is not properly
handled.
This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq()
and ena_clean_xdp_irq() which resets the device to fix the issue.
This commit also removes unnecessary request id checks from
validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded
because it was already performed in ena_com_tx_comp_req_id_get(), which
is called right before these functions.
Fixes: 403305c9836f ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin <shayagr@amazon.com> Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Sat, 1 Jan 2022 05:27:13 +0000 (06:27 +0100)]
batman-adv: mcast: don't send link-local multicast to mcast routers
The addition of routable multicast TX handling introduced a
bug/regression for packets with a link-local multicast destination:
These packets would be sent to all batman-adv nodes with a multicast
router and to all batman-adv nodes with an old version without multicast
router detection.
This even disregards the batman-adv multicast fanout setting, which can
potentially lead to an unwanted, high number of unicast transmissions or
even congestion.
Fixing this by avoiding to send link-local multicast packets to nodes in
the multicast router list.
Fixes: 38dbf505ecd4 ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Linus Torvalds [Sat, 1 Jan 2022 18:21:49 +0000 (10:21 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Two small fixups for spaceball joystick driver and appletouch touchpad
driver"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: spaceball - fix parsing of movement data packets
Input: appletouch - initialize work before device registration
Jianguo Wu [Fri, 31 Dec 2021 02:01:08 +0000 (10:01 +0800)]
selftests: net: udpgro_fwd.sh: explicitly checking the available ping feature
As Paolo pointed out, the result of ping IPv6 address depends on
the running distro. So explicitly checking the available ping feature,
as e.g. do the bareudp.sh self-tests.
We've added 2 non-merge commits during the last 14 day(s) which contain
a total of 2 files changed, 3 insertions(+), 3 deletions(-).
The main changes are:
1) Revert of an earlier attempt to fix xsk's poll() behavior where it
turned out that the fix for a rare problem made it much worse in
general, from Magnus Karlsson. (Fyi, Magnus mentioned that a proper
fix is coming early next year, so the revert is mainly to avoid
slipping the behavior into 5.16.)
2) Minor misc spell fix in BPF selftests, from Colin Ian King.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Fix spelling mistake "tained" -> "tainted"
Revert "xsk: Do not sleep in poll() when need_wakeup set"
====================
Mel Gorman [Fri, 31 Dec 2021 21:10:09 +0000 (13:10 -0800)]
mm: vmscan: reduce throttling due to a failure to make progress -fix
Hugh Dickins reported the following
My tmpfs swapping load (tweaked to use huge pages more heavily
than in real life) is far from being a realistic load: but it was
notably slowed down by your throttling mods in 5.16-rc, and this
patch makes it well again - thanks.
But: it very quickly hit NULL pointer until I changed that last
line to
if (first_pgdat)
consider_reclaim_throttle(first_pgdat, sc);
The likely issue is that huge pages are a major component of the test
workload. When this is the case, first_pgdat may never get set if
compaction is ready to continue due to this check
Mel Gorman [Thu, 2 Dec 2021 15:06:14 +0000 (15:06 +0000)]
mm: vmscan: Reduce throttling due to a failure to make progress
Mike Galbraith, Alexey Avramov and Darrick Wong all reported similar
problems due to reclaim throttling for excessive lengths of time. In
Alexey's case, a memory hog that should go OOM quickly stalls for
several minutes before stalling. In Mike and Darrick's cases, a small
memcg environment stalled excessively even though the system had enough
memory overall.
Commit 3843f54352e0 ("mm/vmscan: throttle reclaim when no progress is
being made") introduced the problem although commit ab68f496da4f
("mm/vmscan: increase the timeout if page reclaim is not making
progress") made it worse. Systems at or near an OOM state that cannot
be recovered must reach OOM quickly and memcg should kill tasks if a
memcg is near OOM.
To address this, only stall for the first zone in the zonelist, reduce
the timeout to 1 tick for VMSCAN_THROTTLE_NOPROGRESS and only stall if
the scan control nr_reclaimed is 0, kswapd is still active and there
were excessive pages pending for writeback. If kswapd has stopped
reclaiming due to excessive failures, do not stall at all so that OOM
triggers relatively quickly. Similarly, if an LRU is simply congested,
only lightly throttle similar to NOPROGRESS.
Alexey's original case was the most straight forward
for i in {1..3}; do tail /dev/zero; done
On vanilla 5.16-rc1, this test stalled heavily, after the patch the test
completes in a few seconds similar to 5.15.
Alexey's second test case added watching a youtube video while tail runs
10 times. On 5.15, playback only jitters slightly, 5.16-rc1 stalls a
lot with lots of frames missing and numerous audio glitches. With this
patch applies, the video plays similarly to 5.15.
Linus Torvalds [Fri, 31 Dec 2021 17:22:25 +0000 (09:22 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers. The lpfc one doesn't look exploitable,
but nasty things could happen in string operations if mybuf ends up
with an on stack unterminated string"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: vmw_pvscsi: Set residual data length conditionally
scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()
scsi: lpfc: Terminate string in lpfc_debugfs_nvmeio_trc_write()
projects / kernel.git / log