Chris Wilson [Fri, 7 Feb 2020 21:14:52 +0000 (21:14 +0000)]
drm/i915/execlists: Always force a context reload when rewinding RING_TAIL
If we rewind the RING_TAIL on a context, due to a preemption event, we
must force the context restore for the RING_TAIL update to be properly
handled. Rather than note which preemption events may cause us to rewind
the tail, compare the new request's tail with the previously submitted
RING_TAIL, as it turns out that timeslicing was causing unexpected
rewinds.
<idle>-0 0d.s2 1280851190us : __execlists_submission_tasklet: 0000:00:02.0 rcs0: expired last=130:4698, prio=3, hint=3
<idle>-0 0d.s2 1280851192us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 66:119966, current 119964
<idle>-0 0d.s2 1280851195us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4698, current 4695
<idle>-0 0d.s2 1280851198us : __i915_request_unsubmit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
^---- Note we unwind 2 requests from the same context
<idle>-0 0d.s2 1280851208us : __i915_request_submit: 0000:00:02.0 rcs0: fence 130:4696, current 4695
<idle>-0 0d.s2 1280851213us : __i915_request_submit: 0000:00:02.0 rcs0: fence 134:1508, current 1506
^---- But to apply the new timeslice, we have to replay the first request
before the new client can start -- the unexpected RING_TAIL rewind
Fixes: b0ea7ccafad8 ("drm/i915/execlists: Minimalistic timeslicing")
Referenecs: d6f83f7ad830 ("drm/i915/gt: Detect if we miss WaIdleLiteRestore") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Link: https://patchwork.freedesktop.org/patch/msgid/20200207211452.2860634-1-chris@chris-wilson.co.uk
Mika Kuoppala [Fri, 7 Feb 2020 15:51:38 +0000 (17:51 +0200)]
drm/i915: Implement Wa_1607090982
SIMD16 with Src0 scalar might conflict between Src1/Src2 and cause
GRF read issue. Workaround this issue by setting bit 14 in 0xe4f4
which will disable early read/src swap of Src0.
Chris Wilson [Fri, 7 Feb 2020 12:58:27 +0000 (12:58 +0000)]
drm/i915/gt: Use the kernel_context to measure the breadcrumb size
We set up a dummy ring in order to measure the size we require for our
breadcrumb emission, so that we don't have to manually count dwords! We
can pass in the kernel_context to use for this so that if required it is
known for the breadcrumb emitter, and we can reuse some details from the
kernel_context to reduce the number of temporaries we have to mock.
We are sanitizing firmware status and old mmio message, but
we forget to sanitize CT status.
Fixes: e0068b0f5445 ("drm/i915/guc: Introduce guc_is_ready") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200207131938.2787828-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
So, turns out that this ended up just breaking things. While many
laptops incorrectly advertise themselves as supporting PWM backlight
controls, they actually will only work with DPCD backlight controls.
Unfortunately, it also seems there are a number of systems which
advertise DPCD backlight controls in their eDP DPCD but don't actually
support them. Talking with some laptop manufacturers has shown it might
be possible to probe this support via the EDID (!?!?) but I haven't been
able to confirm that this would work on any other manufacturer's
systems.
So in the mean time, we'll just revert this commit for now and go back
to the old way of doing things.
which is us consuming a partially initialised new waiter in
defer_requests(). We can prevent this by initialising the i915_dependency
prior to making it visible, and since we are using a concurrent
list_add/iterator mark them up to the compiler.
Chris Wilson [Thu, 6 Feb 2020 20:49:12 +0000 (20:49 +0000)]
drm/i915/gt: Prevent queuing retire workers on the virtual engine
Virtual engines are fleeting. They carry a reference count and may be freed
when their last request is retired. This makes them unsuitable for the
task of housing engine->retire.work so assert that it is not used.
Tvrtko tracked down an instance where we did indeed violate this rule.
In virtual_submit_request, we flush a completed request directly with
__i915_request_submit and this causes us to queue that request on the
veng's breadcrumb list and signal it. Leading us down a path where we
should not attach the retire.
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 27418a6c19a0 ("drm/i915/gt: Schedule request retirement when signaler idles") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200206204915.2636606-1-chris@chris-wilson.co.uk
Matthew Auld [Thu, 6 Feb 2020 17:03:40 +0000 (17:03 +0000)]
drm/i915/selftests: drop igt_ppgtt_exhaust_huge
We already have tests that exhaustively exercise the most interesting
page-size combinations, along with tests that offer randomisation, and
so we should already be testing objects(local, system) with a varying
mix of page-sizes, which leaves igt_ppgtt_exhaust_huge providing not
much in terms of extra coverage.
drm/i915/display: Set TRANS_DDI_MODE_SELECT to default value when clearing DDI select
TGL is suffering of timeouts and fifo underruns when disabling
transcoder in MST mode, this is fixed by set TRANS_DDI_MODE_SELECT to
0(HDMI mode) when clearing DDI select.
Although BSpec disable sequence don't require this step, it is a
harmless change and it is also done by Windows driver.
Anyhow HW team was notified about that but it can take some time to
documentation to be updated.
A case that always lead to those issues is:
- do a modeset enabling pipe A and pipe B in the same MST stream
leaving A as master
- disable pipe A, promote B as master doing a full modeset in A
- enable pipe A, changing the master transcoder back to A(doing a
full modeset in B)
- Pow: underruns and timeouts
The transcoders involved will only work again when complete disabled
and their power wells turned off causing a reset in their registers.
v2: Setting TRANS_DDI_MODE_SELECT to default when clearing DDI select
not anymore when disabling TRANS_DDI, both work but this one looks
more safe. (Ville comment)
Chris Wilson [Thu, 6 Feb 2020 01:44:38 +0000 (01:44 +0000)]
drm/i915/gt: Set the PP_DIR registers upon enabling ring submission
Always prime the page table registers before starting the ring. Even
though we will update these to the per-context page tables during
dispatch, it is prudent to ensure that the registers always point to a
valid PD.
Chris Wilson [Wed, 5 Feb 2020 09:54:40 +0000 (09:54 +0000)]
drm/i915: Flush execution tasklets before checking request status
Rather than flushing the submission tasklets just before we sleep, flush
before we check the request status. Ideally this gives us a moment to
process the tasklets after sleeping just before we timeout.
v2: Compromise by pushing the flush prior to the timeout, but after the
check on completion so that we do not further delay the ready client.
Chris Wilson [Wed, 5 Feb 2020 12:37:57 +0000 (12:37 +0000)]
drm/i915: Mark i915.reset as unsigned
We have been using '-1' to mean the maximum i915.reset level in the
belief that it was unsigned... This turns out to have been a grave
error, and instead of setting the default reset mechanism in igt,
we have been disabling reset!
Added proper DBuf slice mapping to correspondent
pipes, depending on pipe configuration as stated
in BSpec.
v2:
- Remove unneeded braces
- Stop using macro for DBuf assignments as
it seems to reduce readability.
v3: Start using enabled slices mask in dev_priv
v4: Renamed "enabled_slices" used in dev_priv
to "enabled_dbuf_slices_mask"(Matt Roper)
v5: - Removed redundant parameters from
intel_get_ddb_size function.(Matt Roper)
- Made i915_possible_dbuf_slices static(Matt Roper)
- Renamed total_width into total_width_in_range
so that it now reflects that this is not
a total pipe width but the one in current
dbuf slice allowed range for pipe.(Matt Roper)
- Removed 4th pipe for ICL in DBuf assignment
table(Matt Roper)
- Fixed wrong DBuf slice in DBuf table for TGL
(Matt Roper)
- Added comment regarding why we currently not
using pipe ratio for DBuf assignment for ICL
v6: - Changed u32 to unsigned int in
icl_get_first_dbuf_slice_offset function signature
(Ville Syrjälä)
- Changed also u32 to u8 in dbuf slice mask structure
(Ville Syrjälä)
- Switched from DBUF_S1_BIT to enum + explicit
BIT(DBUF_S1) access(Ville Syrjälä)
- Switched to named initializers in DBuf assignment
arrays(Ville Syrjälä)
- DBuf assignment arrays now use autogeneration tool
from
https://patchwork.freedesktop.org/series/70493/
to avoid typos.
- Renamed i915_find_pipe_conf to *_compute_dbuf_slices
(Ville Syrjälä)
- Changed platforms ordering in skl_compute_dbuf_slices
to be from newest to oldest(Ville Syrjälä)
v7: - Now ORing assigned DBuf slice config always with DBUF_S1
because slice 1 has to be constantly powered on.
(Ville Syrjälä)
v8: - Added pipe_name for neater printing(Ville Syrjälä)
- Renamed width_before_pipe to width_before_pipe_in_range,
to better reflect that now all the calculations are happening
inside DBuf range allowed by current pipe configuration mask
(Ville Syrjälä)
- Shortened FIXME comment message, regarding constant ORing with
DBUF_S1(Ville Syrjälä)
- Added .dbuf_mask named initializer to pipe assignment array
(Ville Syrjälä)
- Edited pipe assignment array to use only single DBuf slice
for gen11 single pipe configurations, until "pipe ratio"
thing is finally sorted out(Ville Syrjälä)
- Removed unused parameter crtc_state for now(Ville Syrjälä)
from icl/tgl_compute_dbuf_slices function
Start manipulating DBuf slices as a mask,
but not as a total number, as current approach
doesn't give us full control on all combinations
of slices, which we might need(like enabling S2
only can't enabled by setting enabled_slices=1).
Removed wrong code from intel_get_ddb_size as
it doesn't match to BSpec. For now still just
use DBuf slice until proper algorithm is implemented.
Other minor code refactoring to get prepared
for major DBuf assignment changes landed:
- As now enabled slices contain a mask
we still need some value which should
reflect how much DBuf slices are supported
by the platform, now device info contains
num_supported_dbuf_slices.
- Removed unneeded assertion as we are now
manipulating slices in a more proper way.
v2: Start using enabled_slices in dev_priv
v3: "enabled_slices" is now "enabled_dbuf_slices_mask",
as this now sits in dev_priv independently.
v4: - Fixed debug print formatting to hex(Matt Roper)
- Optimized dbuf slice updates to be used only
if slice union is different from current conf(Matt Roper)
- Fixed some functions to be static(Matt Roper)
- Created a parameterized version for DBUF_CTL to
simplify DBuf programming cycle(Matt Roper)
- Removed unrequred field from GEN10_FEATURES(Matt Roper)
v5: - Removed redundant programming dbuf slices helper(Ville Syrjälä)
- Started to use parameterized loop for hw readout to get slices
(Ville Syrjälä)
- Added back assertion checking amount of DBUF slices enabled
after DC states 5/6 transition, also added new assertion
as starting from ICL DMC seems to restore the last DBuf
power state set, rather than power up all dbuf slices
as assertion was previously expecting(Ville Syrjälä)
v6: - Now using enum for DBuf slices in this patch (Ville Syrjälä)
- Removed gen11_assert_dbuf_enabled and put gen9_assert_dbuf_enabled
back, as we really need to have a single unified assert here
however currently enabling always slice 1 is enforced by BSpec,
so we will have to OR enabled slices mask with 1 in order
to be consistent with BSpec, that way we can unify that
assertion and against the actual state from the driver, but
not some hardcoded value.(concluded with Ville)
- Remove parameterized DBUF_CTL version, to extract it to another
patch.(Ville Syrjälä)
v7:
- Removed unneeded hardcoded return value for older gens from
intel_enabled_dbuf_slices_mask - this now is handled in a
unified manner since device info anyway returns max dbuf slices
as 1 for older platforms(Matthew Roper)
- Now using INTEL_INFO(dev_priv)->num_supported_dbuf_slices instead
of intel_dbuf_max_slices function as it is trivial(Matthew Roper)
v8: - Fixed icl_dbuf_disable to disable all dbufs still(Ville Syrjälä)
v9: - Renamed _DBUF_CTL_S to DBUF_CTL_S(Ville Syrjälä)
- Now using power_domain mutex to protect from race condition, which
can occur because intel_dbuf_slices_update might be running in
parallel to gen9_dc_off_power_well_enable being called from
intel_dp_detect for instance, which causes assertion triggered by
race condition, as gen9_assert_dbuf_enabled might preempt this
when registers were already updated, while dev_priv was not.
Now start using parameterized DBUF_CTL instead
of hardcoded, this would allow shorter access
functions when reading or storing entire state.
Tried to implement it in a MMIO_PIPE manner, however
DBUF_CTL1 address is higher than DBUF_CTL2, which
implies that we have to now subtract from base
rather than add.
v2: - Removed unneeded DBUF_CTL_DIST and DBUF_CTL_ADDR
macros. Started to use _PICK construct as suggested
by Matt Roper.
v3: - _DBUF_CTL_S* to DBUF_CTL_S*, changed X to "slice"
in macro(Ville Syrjälä)
- Introduced enum for enumerating DBUF slices(Ville Syrjälä)
drm/i915: Update dbuf slices only with full modeset
During full modeset, global state(i.e dev_priv) is protected
by locking the crtcs in state, otherwise global state is not
serialized. Also if it is not a full modeset, we anyway
don't need to change DBuf slice configuration as Pipe configuration
doesn't change.
Current DBuf slices update wasn't done in proper
place, especially its "post" part, which should
disable those only once vblank had passed and
all other changes are committed.
v2: Fix to use dev_priv and intel_atomic_state
instead of skl_ddb_values
(to be nuked in Villes patch)
v3: Renamed "enabled_slices" to "enabled_dbuf_slices_num"
(Matt Roper)
v4: - Rebase against drm-tip.
- Move post_update closer to optimize_watermarks,
to prevent unneeded noise from underrun reporting
(Ville Syrjälä)
Current consensus that it is redundant as
we already have skl_ddb_values struct out there,
also this struct contains only single member
which makes it unnecessary.
v2: As dirty_pipes soon going to be nuked away
from skl_ddb_values, evacuating enabled_slices
to safer in dev_priv.
v3: Changed "enabled_slices" to be "enabled_dbuf_slices_num"
(Matt Roper)
v4: - Wrapped the line getting number of dbuf slices(Matt Roper)
- Removed indeed redundant skl_ddb_values declaration(Matt Roper)
Chris Wilson [Tue, 4 Feb 2020 09:48:02 +0000 (09:48 +0000)]
drm/i915/display: Be explicit in handling the preallocated vma
As only the display codes tries to pin its preallocated framebuffer into
an exact location in the GGTT, remove the convenience function and make
the pin management explicit in the display code. Then throughout the
display management, we track the framebuffer and its plane->vma; with
less single purpose code and ready for first class i915_vma.
In doing so, this should fix the BUG_ON(vma->pages) on fi-kbl-soraka.
I am about to stuff more objects into the plane_config and would like to
have it clean up after itself. Move the current framebuffer release into
a common function so it can be extended with the new object with
relative ease.
Jani Nikula [Tue, 28 Jan 2020 16:38:03 +0000 (18:38 +0200)]
drm/i915/hdcp: move update pipe code to hdcp
The DDI encoder code shouln't have to know about the guts of
HDCP. Abstract the pipe update code to a new intel_hdcp_update_pipe() in
intel_hdcp.c. No functional changes.
Chris Wilson [Mon, 3 Feb 2020 20:21:10 +0000 (20:21 +0000)]
drm/i915/gt: Fix rc6 on Ivybridge
The current rc6 threshold is larger than the evaluation interval on
Ivybridge; it never enters rc6. Remove the special casing so it behaves
like the other gen6/gen7, and we see rc6 residencies before we manually
park the system.
Ville Syrjälä [Tue, 21 Jan 2020 17:10:52 +0000 (19:10 +0200)]
drm/i915/crt: Configure connector->polled and encoder->hpd_pin consistently
Let's make sure encoder->hpd_pin and connector->polled are mirror
images of each other (when we want to use polling). The other
potentially polled connectors (sdvo and tv) already get this right.
Also nuke the redundant force_hotplug_required initialization
(the thing is kzalloc()ed).
Ville Syrjälä [Tue, 21 Jan 2020 17:10:51 +0000 (19:10 +0200)]
drm/i915: Introduce intel_connector_hpd_pin()
Simplify the hotplug code connector->encoder->hpd_pin handling
by introducing a helper for exactly this purpose.
In the helper we can neatly deal with the potential lack of an
attached encoder on fresh MST connectors leaving the rest of the
hpd code oblivious to such details.
page-flags: define PG_reserved behavior on compound pages
As far as I can see there's no users of PG_reserved on compound pages.
Let's use PF_NO_COMPOUND here.
drm_pci_alloc has been declared broken since it mixes GFP_COMP and
SetPageReserved. Avoid this conflict by weaning ourselves off using the
abstraction and using the dma functions directly.
Reported-by: Taketo Kabe Closes: https://gitlab.freedesktop.org/drm/intel/issues/1027 Fixes: b920220b383e ("page-flags: define PG_reserved behavior on compound pages") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: <stable@vger.kernel.org> # v4.5+ Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200202153934.3899472-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 3 Feb 2020 18:16:25 +0000 (18:16 +0000)]
drm/i915/selftest: Ensure string fits within name[]
Shrink the strncpy bounds to ensure the NUL-terminator can fit within
the embedded array:
In file included from drivers/gpu/drm/i915/gem/i915_gem_context.c:2475:
drivers/gpu/drm/i915/gem/selftests/mock_context.c: In function ‘mock_context’:
drivers/gpu/drm/i915/gem/selftests/mock_context.c:40:3: error: ‘strncpy’ specified bound 24 equals destination size [-Werror=stringop-truncation]
40 | strncpy(ctx->name, name, sizeof(ctx->name));
Chris Wilson [Mon, 3 Feb 2020 14:50:16 +0000 (14:50 +0000)]
drm/i915/display: Defer application of initial chv_phy_control
To write to the DISPLAY_PHY_CONTROL requires holding the powerwells,
which during early resume we have not yet acquired until later in
intel_display_power_init_hw(). So compute the initial chv_phy_control,
but leave the HW unset until we first acquire the powerwell.
Wambui Karuga [Fri, 31 Jan 2020 09:34:14 +0000 (12:34 +0300)]
drm/i915/cmd_parser: conversion to struct drm_device logging macros.
Manually convert printk based drm logging macros to the struct
drm_device based logging macros in i915/i915_cmd_parser.c.
This also involves extracting the drm_i915_private device from various
intel types for use in the macros.
Instances of the DRM_DEBUG macro are not converted due to the lack of a
similar struct drm_device based logging macro.
Wambui Karuga [Fri, 31 Jan 2020 09:34:13 +0000 (12:34 +0300)]
drm/i915/debugfs: conversion to drm_device based logging macros.
Manual conversion of printk based logging macros to the struct
drm_device based logging macros in i915/i915_debugfs.c.
Also involves extracting the struct drm_i915_private device from various
intel types to use in the macros.
This does not convert various instances of the DRM_DEBUG macro due to
the lack of an analogous struct drm_device based logging macro.
Wambui Karuga [Fri, 31 Jan 2020 09:34:12 +0000 (12:34 +0300)]
drm/i915: conversion to drm_device logging macros when drm_i915_private is present.
Converts various instances of the printk drm logging macros to the
struct drm_device based logging macros in the drm/i915 folder using the
following coccinelle script that transforms based on the existence of
the struct drm_i915_private device pointer:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:29 +0000 (11:32 +0300)]
drm/i915/panel: automatic conversion to drm_device based logging macros.
Converts various instances of the printk based drm logging macros to the
struct drm_device based logging macros in i915/display/intel_panel.c
using the following coccinelle script that transforms based on the
existence of a struct drm_i915_private device pointer:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:28 +0000 (11:32 +0300)]
drm/i915/pipe_crc: automatic conversion to drm_device based logging macros.
Conversion of various instances of the printk based logging macros to
the new struct drm_device based logging macros in
i915/display/intel_pipe_crc.c using the following coccinelle script that
transforms based on the existence of a drm_i915_private device pointer:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:27 +0000 (11:32 +0300)]
drm/i915/psr: automatic conversion to drm_device based logging macros.
Converts instances of the printk based logging macros to the struct
drm_device based logging macros in i915/display/intel_psr.c using the
following coccinelle script that transforms based on the existence of a
drm_i915_private device pointer:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:26 +0000 (11:32 +0300)]
drm/i915/quirks: automatic conversion to drm_device based logging macros.
Converts instances of the printk based drm logging macros to the struct
drm_device based logging macros in i915/display/intel_quirks.c using the
following coccinelle script that transforms based on the existence of a
struct drm_i915_private device:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:25 +0000 (11:32 +0300)]
drm/i915/sdvo: automatic conversion to drm_device based logging macros.
Converts instances of the printk based drm logging macros to the new
struct drm_device based logging macros in i915/display/intel_sdvo.c
This was done automatically using the following coccinelle script that
matches based on the existence of a drm_i915_private device pointer:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:24 +0000 (11:32 +0300)]
drm/i915/sprite: automatic conversion to drm_device based logging macros
Conversion of most instances of the printk based logging macros to the
struct drm_device based logging macros in i915/display/intel_sprite.c
This was done automatically by the following coccinelle script that
matches based on the existence of a struct drm_i915_private device:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:23 +0000 (11:32 +0300)]
drm/i915/tc: automatic conversion to drm_device based logging macros.
Converts most uses of the printk based logging macros to the struct
drm_device based logging macros in i915/display/intel_tc.c using the
following coccinelle script that matches based on the existence of a
struct drm_i915_private device:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:22 +0000 (11:32 +0300)]
drm/i915/tv: automatic conversion to drm_device based logging macros.
Converts most uses of the printk based logging macros to the struct
drm_device based logging macros in i915/display/intel_tv.c using the
following coccinelle script that matches based on the existence of a
drm_i915_private device pointer:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:21 +0000 (11:32 +0300)]
drm/i915/vdsc: convert to struct drm_device based logging macros.
Converts uses of the printk based drm logging macros to the new struct
drm_device based logging macros in i915/display/intel_vdsc.c.
This was done using the following coccinelle script that transforms
based on the existence of a struct drm_i915_private device:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:20 +0000 (11:32 +0300)]
drm/i915/vga: conversion to drm_device based logging macros.
Converts the printk based logging macros to the struct drm_device based
logging macros in i915/display/intel_vga.c using the following
coccinelle script that matches based on the existence of a
drm_i915_private device pointer:
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:19 +0000 (11:32 +0300)]
drm/i915/vlv_dsi: conversion to drm_device based logging macros.
Converts the printk based logging macros to the struct drm_device based
logging macros in i915/display/vlv_dsi.c.
This was done using the following coccinelle script that transforms
based on the existence of a drm_i915_private device pointer.
@@
identifier fn, T;
@@
Wambui Karuga [Thu, 30 Jan 2020 08:32:18 +0000 (11:32 +0300)]
drm/i915/vlv_dsi_pll: conversion to struct drm_device logging macros.
Convert the printk based logging macros to the new struct drm_device
based logging macros in i915/display/vlv_dsi_pll.c using the following
coccinelle script that matches based on the existence of a drm_i915_private
device:
@@
identifier fn, T;
@@
Pankaj Bharadiya [Tue, 28 Jan 2020 18:16:01 +0000 (23:46 +0530)]
drm/i915/display: Make WARN* drm specific where drm_device ptr is available
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device or drm_i915_private struct
pointer is readily available.
The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.
Pankaj Bharadiya [Tue, 28 Jan 2020 18:15:55 +0000 (23:45 +0530)]
drm/i915/display/hdmi: Make WARN* drm specific where drm_device ptr is available
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device or drm_i915_private struct
pointer is readily available.
The conversion was done automatically with below coccinelle semantic
patch.
Pankaj Bharadiya [Tue, 28 Jan 2020 18:15:51 +0000 (23:45 +0530)]
drm/i915/display/dpll_mgr: Make WARN* drm specific where drm_device ptr is available
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.
Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_device or drm_i915_private struct
pointer is readily available.
The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.
Chris Wilson [Mon, 3 Feb 2020 09:41:49 +0000 (09:41 +0000)]
drm/i915/gt: Warn about the hidden i915_vma_pin in timeline_get_seqno
On seqno rollover, we need to allocate ourselves a new cacheline. This
might incur grabbing a new page and pinning it into the GGTT, with some
rather unfortunate lockdep implications.
To avoid a mutex, and more specifically pinning in the GGTT from inside
the kernel context being used to flush the GGTT in emergencies, we will
likely need to lift the next-cacheline allocation to a pre-reservation.
Chris Wilson [Mon, 3 Feb 2020 09:41:48 +0000 (09:41 +0000)]
drm/i915: Initialise basic fence before acquiring seqno
Inside the intel_timeline_get_seqno(), we currently track the retirement
of the old cachelines by listening to the new request. This requires
that the new request is ready to be used and so requires a minimum bit
of initialisation prior to getting the new seqno.
Chris Wilson [Mon, 3 Feb 2020 09:41:47 +0000 (09:41 +0000)]
drm/i915: Hold reference to previous active fence as we queue
Take a reference to the previous exclusive fence on the i915_active, as
we wish to add an await to it in the caller (and so must prevent it from
being freed until we have completed that task).
drm/i915: Move ringbuffer WAs to engine workaround list
Now that intel_engine_apply_workarounds is called on all gens, we can
use the engine workaround lists for pre-gen8 workarounds as well to be
consistent in the way we handle and dump the WAs.
v2: Ignore the sanity check of MI_MODE on Broadwater, for whatever reason
it is not sticking.
drm/i915: extract engine WA programming to common resume function
The workarounds are a common "feature" across gens and submission
mechanisms and we already call the other WA related functions from
common engine ones (<setup/cleanup>_common), so it makes sense to
do the same with WA application. Medium-term, This will help us
reduce the duplication once the GuC resume function is added, but short
term it will also allow us to use the workaround lists for pre-gen8
engine workarounds.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200131075716.2212299-2-chris@chris-wilson.co.uk
Michal Wajdeczko [Fri, 31 Jan 2020 15:37:06 +0000 (15:37 +0000)]
drm/i915/guc: Introduce guc_is_ready
We already have guc_is_running function, but it only reflects
firmware status, while to fully use GuC we need to know if we've
already established communication with it.
v2: also s/intel_guc_is_running/intel_guc_is_fw_running (Chris)
Chris Wilson [Fri, 31 Jan 2020 08:15:42 +0000 (08:15 +0000)]
drm/i915/gt: Also use async bind for PIN_USER into bsw/bxt ggtt
In the rare cases where we are using the global GGTT for execution in
the selftests, we have marked them with PIN_USER knowing that they will
be bound as PIN_GLOBAL as well. However, we need to catch the extra flag
in deciding to use the async worker for such binds as well.
Chris Wilson [Thu, 30 Jan 2020 16:45:53 +0000 (16:45 +0000)]
drm/i915/gem: Require per-engine reset support for non-persistent contexts
To enable non-persistent contexts, we require a means of cancelling any
inflight work from that context. This is first done "gracefully" by
using preemption to kick the active context off the engine, and then
forcefully by resetting the engine if it is active. If we are unable to
reset the engine to remove hostile userspace, we should not allow
userspace to opt into using non-persistent contexts.
If the per-engine reset fails, we still do a full GPU reset, but that is
rare and usually indicative of much deeper issues. The damage is already
done. However, the goal of the interface to allow long running compute
jobs without causing collateral damage elsewhere, and if we are unable
to support that we should make that known by not providing the
interface (and falsely pretending we can).
Fixes: d047fead96ec ("drm/i915/gem: Make context persistence optional") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200130164553.1937718-1-chris@chris-wilson.co.uk
Ville Syrjälä [Mon, 20 Jan 2020 17:47:28 +0000 (19:47 +0200)]
drm/i915: Store active_pipes bitmask in cdclk state
Let's add a copy of the active_pipes bitmask into the cdclk_state.
While this is duplicating a bit of information we may already
have elsewhere, I think it's worth it to decopule the cdclk stuff
from whatever else wants to use that bitmask. Also we want to get
rid of all the old ad-hoc global state which is what the current
bitmask is, so this removes one obstacle.
The one extra thing we have to remember is write locking the cdclk
state whenever the bitmask changes.
Ville Syrjälä [Tue, 21 Jan 2020 14:03:53 +0000 (16:03 +0200)]
drm/i915: Convert cdclk to global state
Let's convert cdclk_state to be a proper global state. That allows
us to use the regular atomic old vs. new state accessor, hopefully
making the code less confusing.
We do have to deal with a few more error cases in case the cdclk
state duplication fails. But so be it.
v2: Fix new plane min_cdclk vs. old crtc min_cdclk check
Ville Syrjälä [Mon, 20 Jan 2020 17:47:26 +0000 (19:47 +0200)]
drm/i915: Introduce intel_calc_active_pipes()
Extract a small helper to compute the active pipes bitmask
based on the old bitmask + the crtcs in the atomic state.
I want to decouple the cdclk state entirely from the current
global state so I want to track the active pipes also inside
the (to be introduced) full cdclk state.
Ville Syrjälä [Mon, 20 Jan 2020 17:47:25 +0000 (19:47 +0200)]
drm/i915: Convert bandwidth state to global state
Now that we have the more formal global state thing let's
use if for memory bandwidth tracking. No real difference
to the current private object usage since we already
tried to avoid taking the single serializing lock needlessly.
But since we're going to roll the global state out to more
things probably a good idea to unify the approaches a bit.
Ville Syrjälä [Mon, 20 Jan 2020 17:47:24 +0000 (19:47 +0200)]
drm/i915: Introduce better global state handling
Our current global state handling is pretty ad-hoc. Let's try to
make it better by imitating the standard drm core private object
approach.
The reason why we don't want to directly use the private objects
is locking; Each private object has its own lock so if we
introduce any global private objects we get serialized by that
single lock across all pipes. The global state apporoach instead
uses a read/write lock type of approach where each individual
crtc lock counts as a read lock, and grabbing all the crtc locks
allows one write access.
Ville Syrjälä [Mon, 20 Jan 2020 17:47:21 +0000 (19:47 +0200)]
drm/i915: s/init_cdclk/init_cdclk_hw/
Give the cdclk init/uninit functions a _hw suffix to make
it clear they are about initializing the actual hardware.
I'll be wanting to to add a intel_cdclk_init() which is
purely initializing software structures.
Ville Syrjälä [Mon, 20 Jan 2020 17:47:16 +0000 (19:47 +0200)]
drm/i915: s/need_cd2x_updare/can_cd2x_update/
intel_cdclk_needs_cd2x_update() is named rather confusingly.
We don't have to do a cd2x update, rather we are allowed to
do one (as opposed to a full PLL reprogramming with its heavy
handed modeset). So let's rename the function to
intel_cdclk_can_cd2x_update().
Ville Syrjälä [Mon, 20 Jan 2020 17:47:15 +0000 (19:47 +0200)]
drm/i915: Collect more cdclk state under the same roof
Move the min_cdclk[] and min_voltage_level[] arrays under the
rest of the cdclk state. And while at it provide a simple
helper (intel_cdclk_clear_state()) to clear the state during
the ww_mutex backoff dance.
Ville Syrjälä [Mon, 20 Jan 2020 17:47:14 +0000 (19:47 +0200)]
drm/i915: Move more cdclk state handling into the cdclk code
Move the initial setup of state->{cdclk,min_cdclk[],min_voltage_level[]}
into intel_modeset_calc_cdclk(), and we'll move the counterparts into
intel_cdclk_swap_state(). This encapsulates the cdclk state much better.
Ville Syrjälä [Mon, 20 Jan 2020 17:47:12 +0000 (19:47 +0200)]
drm/i915: Move linetime wms into the crtc state
The linetime watermarks really have very little in common with the
plane watermarks. It looks to be cleaner to simply track them in
the crtc_state and program them from the normal modeset/fastset
paths.
The only dark cloud comes from the fact that the register is
still supposedly single buffered. So in theory it might still
need some form of two stage programming. Note that even though
HSW/BDWhave two stage programming we never computed any special
intermediate values for the linetime watermarks, and on SKL+
we don't even have the two stage stuff plugged in since everything
else is double buffered. So let's assume it's all fine and
continue doing what we've been doing.
Actually on HSW/BDW the value should not even change without
a full modeset since it doesn't account for pfit downscaling.
Thus only fastboot might be affected. But on SKL+ the pfit
scaling factor is take into consideration so the value may
change during any fastset.
As a bonus we'll plug this thing into the state
checker/dump now.
v2: Rebase due to bigjoiner prep
v2: Only compute ips linetime for IPS capable pipes.
Bspec says the register values is ignored for other
pipes, but in fact it can't even be written so the
state checker becomes unhappy if we don't compute
it as zero.
Vandita Kulkarni [Tue, 28 Jan 2020 16:28:49 +0000 (18:28 +0200)]
drm/i915/dsi: Enable ICL DSI transcoder as part of encoder->enable
Enable the dsi transcoder, panel and backlight as part of
encoder->enable and not encoder->pre_enable. We need to have pipe src
size, among other things, set before enabling the transcoder, to avoid
FIFO underruns and possibly other issues.
v2 by Jani:
- Rebase on the crtc enable sequence update
Jani Nikula [Tue, 28 Jan 2020 16:28:48 +0000 (18:28 +0200)]
drm/i915: move pipe, pch and vblank enable to encoders on DDI platforms
To allow better flexibility for encoder specific code, push
intel_enable_pipe(), lpt_pch_enable() and intel_crtc_vblank_on() down to
the encoders from hsw_crtc_enable().
There's slight duplication, but also more clarity with the reduced
conditional statements.
Chris Wilson [Thu, 30 Jan 2020 18:17:10 +0000 (18:17 +0000)]
drm/i915: Use the async worker to avoid reclaim tainting the ggtt->mutex
On Braswell and Broxton (also known as Valleyview and Apollolake), we
need to serialise updates of the GGTT using the big stop_machine()
hammer. This has the side effect of appearing to lockdep as a possible
reclaim (since it uses the cpuhp mutex and that is tainted by per-cpu
allocations). However, we want to use vm->mutex (including ggtt->mutex)
from within the shrinker and so must avoid such possible taints. For this
purpose, we introduced the asynchronous vma binding and we can apply it
to the PIN_GLOBAL so long as take care to add the necessary waits for
the worker afterwards.
projects / kernel.git / log