Merge tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- add a warning when the atomic pool is depleted (David Rientjes)
- protect the parameters of the new scatterlist helper macros (Marek
Szyprowski )
* tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping:
scatterlist: protect parameters of the sg_table related macros
dma-mapping: warn when coherent pool is depleted
Merge tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix an issue in the AMD driver for the UART0 group
- Fix a glitch issue in the Baytrail pin controller
* tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
pinctrl: amd: fix npins for uart0 in kerncz_groups
Merge tag 'gpio-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes, most of them for the PCA953x that Andy worked hard to
fix up.
- Fix two runtime PM errorpath problems in the Arizona GPIO driver.
- Fix three interrupt issues in the PCA953x driver.
- Fix the automatic address increment handling in the PCA953x driver
again.
- Add a quirk to the PCA953x that fixes a problem in the Intel
Galileo Gen 2"
* tag 'gpio-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Fix GPIO resource leak on Intel Galileo Gen 2
gpio: pca953x: disable regmap locking for automatic address incrementing
gpio: pca953x: Fix direction setting when configure an IRQ
gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2
gpio: pca953x: Synchronize interrupt handler properly
gpio: arizona: put pm_runtime in case of failure
gpio: arizona: handle pm_runtime_get_sync failure case
Merge tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Fix gfs2 readahead deadlocks by adding a IOCB_NOIO flag that allows
gfs2 to use the generic fiel read iterator functions without having to
worry about being called back while holding locks".
* tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Rework read and page fault locking
fs: Add IOCB_NOIO flag for generic_file_read_iter
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"An unfortunately large collection of arm64 fixes for -rc5.
Some of this is absolutely trivial, but the alternatives, vDSO and CPU
errata workaround fixes are significant. At least people are finding
and fixing these things, I suppose.
- Fix workaround for CPU erratum #1418040 to disable the compat vDSO
- Fix Oops when single-stepping with KGDB
- Fix memory attributes for hypervisor device mappings at EL2
- Fix memory leak in PSCI and remove useless variable assignment
- Fix up some comments and asm labels in our entry code
- Fix broken register table formatting in our generated html docs
- Fix missing NULL sentinel in CPU errata workaround list
- Fix patching of branches in alternative instruction sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/alternatives: don't patch up internal branches
arm64: Add missing sentinel to erratum_1463225
arm64: Documentation: Fix broken table in generated HTML
arm64: kgdb: Fix single-step exception handling oops
arm64: entry: Tidy up block comments and label numbers
arm64: Rework ARM_ERRATUM_1414080 handling
arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040
arm64: arch_timer: Allow an workaround descriptor to disable compat vdso
arm64: Introduce a way to disable the 32bit vdso
arm64: entry: Fix the typo in the comment of el1_dbg()
drivers/firmware/psci: Assign @err directly in hotplug_tests()
drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
KVM: arm64: Fix definition of PAGE_HYP_DEVICE
Merge tag 's390-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
"This is mainly due to the fact that Gerald Schaefer's and also my old
email addresses currently do not work any longer. Therefore we decided
to switch to new email addresses and reflect that in the MAINTAINERS
file.
- Update email addresses in MAINTAINERS file and add .mailmap entries
for Gerald Schaefer and Heiko Carstens.
- Fix huge pte soft dirty copying"
* tag 's390-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: update email address for Gerald Schaefer
MAINTAINERS: update email address for Heiko Carstens
s390/mm: fix huge pte soft dirty copying
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull vkm fixes from Paolo Bonzini:
"Two simple but important bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MIPS: Fix build errors for 32bit kernel
KVM: nVMX: fixes for preemption timer migration
Merge tag 'mmc-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Override DLL_CONFIG only with valid values in sdhci-msm
- Get rid of of_match_ptr() macro to fix warning in owl-mmc
- Limit segments to 1 to fix meson-gx G12A/G12B SoCs
* tag 'mmc-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-msm: Override DLL_CONFIG only if the valid value is supplied
mmc: owl-mmc: Get rid of of_match_ptr() macro
mmc: meson-gx: limit segments to 1 when dram-access-quirk is needed
Commit d542d56c8e838a49ead31b517 ("KVM: MIPS: Add more MMIO load/store
instructions emulation") introduced some 64bit load/store instructions
emulation which are unavailable on 32bit platform, and it causes build
errors:
arch/mips/kvm/emulate.c: In function 'kvm_mips_emulate_store':
arch/mips/kvm/emulate.c:1734:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 56) & 0xff);
^
arch/mips/kvm/emulate.c:1738:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 48) & 0xffff);
^
arch/mips/kvm/emulate.c:1742:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 40) & 0xffffff);
^
arch/mips/kvm/emulate.c:1746:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 32) & 0xffffffff);
^
arch/mips/kvm/emulate.c:1796:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 32);
^
arch/mips/kvm/emulate.c:1800:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 40);
^
arch/mips/kvm/emulate.c:1804:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 48);
^
arch/mips/kvm/emulate.c:1808:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 56);
^
cc1: all warnings being treated as errors
make[3]: *** [arch/mips/kvm/emulate.o] Error 1
So, use #if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ) to
guard the 64bit load/store instructions emulation.
Reported-by: kernel test robot <lkp@intel.com> Fixes: d542d56c8e838a49ead31b517 ("KVM: MIPS: Add more MMIO load/store instructions emulation") Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1594365797-536-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 9 Jul 2020 17:12:09 +0000 (13:12 -0400)]
KVM: nVMX: fixes for preemption timer migration
Commit c6d93846be1b ("KVM: nVMX: Fix VMX preemption timer migration",
2020-06-01) accidentally broke nVMX live migration from older version
by changing the userspace ABI. Restore it and, while at it, ensure
that vmx->nested.has_preemption_timer_deadline is always initialized
according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag.
Merge tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"I've been off most of the week, but some fixes have piled up. Seems a
bit busier than last week, but they are pretty spread out across a
bunch of drivers, none of them seem that big or worried me too much.
amdgpu:
- Fix a suspend/resume issue with PSP
- Backlight fix for Renoir
- Fix for gpu recovery debugging
* tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: don't do soft recovery if gpu_recovery=0
drm/radeon: fix double free
drm/amd/display: add dmcub check on RENOIR
drm/amdgpu: add TMR destory function for psp
drm/amdgpu: asd function needs to be unloaded in suspend phase
drm/hisilicon/hibmc: Move drm_fbdev_generic_setup() down to avoid the splat
drm/nouveau/nouveau: fix page fault on device private memory
drm/nouveau/svm: fix migrate page regression
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
drm/nouveau/kms/nv50-: bail from nv50_audio_disable() early if audio not enabled
drm/i915/gt: Pin the rings before marking active
drm/i915: Also drop vm.ref along error paths for vma construction
drm/i915: Drop vm.ref for duplicate vma on construction
drm/i915/fbc: Fix fence_y_offset handling
drm/i915: Skip stale object handle for debugfs per-file-stats
drm/mediatek: mtk_hdmi: Remove debug messages for function calls
drm/mediatek: mtk_mt8173_hdmi_phy: Remove unnused const variables
drm/mediatek: Delete not used of_device_get_match_data
drm/mediatek: Remove unnecessary conversion to bool
drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT
...
While raising the gcc version requirement to 4.9, the compile-time check
in the unroll macro was accidentally changed from being used on gcc and
clang to being used on clang only.
Restore the gcc check, changing it from "gcc >= 4.7" to "all gcc".
[ We should probably remove this all entirely: if we remove the check
for CLANG, then the check for GCC can go away. Older versions of clang
are not really appropriate or supported for kernel builds - Linus ]
Fixes: dd264d460253 ("Raise gcc version requirement to 4.9") Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-Wtype-limits is included in -Wextra which is added at W=1. It warns
(among other things) that 'comparison of an unsigned variable `< 0` is
always false. This causes noisy warnings, especially when used in
macros, hence it is more suitable for W=2.
Dave Airlie [Thu, 9 Jul 2020 21:01:24 +0000 (07:01 +1000)]
Merge tag 'drm-intel-fixes-2020-07-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
One display's fbc patch fixing fence_y_offset calculation
from Ville and 4 patches from Chris on GEM: 1 fixing a debugfs
panic and others fixing vma construction and pin under vm->mutex.
Merge tag 'for-5.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- A request-based DM fix to not use a waitqueue to wait for blk-mq IO
completion because doing so is racey.
- A couple more DM zoned target fixes to address issues introduced
during the 5.8 cycle.
- A DM core fix to use proper interface to cleanup DM's static flush
bio.
- A DM core fix to prevent mm recursion during memory allocation needed
by dm_kobject_uevent.
* tag 'for-5.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: use noio when sending kobject event
dm zoned: Fix zone reclaim trigger
dm zoned: fix unused but set variable warnings
dm writecache: reject asynchronous pmem devices
dm: use bio_uninit instead of bio_disassociate_blkg
dm: do not use waitqueue for request-based DM
Merge tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
Marek Olšák [Mon, 6 Jul 2020 22:23:17 +0000 (18:23 -0400)]
drm/amdgpu: don't do soft recovery if gpu_recovery=0
It's impossible to debug shader hangs with soft recovery.
Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Tom Rix [Mon, 6 Jul 2020 12:28:57 +0000 (05:28 -0700)]
drm/radeon: fix double free
clang static analysis flags this error
drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc]
kfree(rdev->pm.dpm.ps[i].ps_priv);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc]
kfree(rdev->pm.dpm.ps);
^~~~~~~~~~~~~~~~~~~~~~
problem is reported in ci_dpm_fini, with these code blocks.
for (i = 0; i < rdev->pm.dpm.num_ps; i++) {
kfree(rdev->pm.dpm.ps[i].ps_priv);
}
kfree(rdev->pm.dpm.ps);
The first free happens in ci_parse_power_table where it cleans up locally
on a failure. ci_dpm_fini also does a cleanup.
ret = ci_parse_power_table(rdev);
if (ret) {
ci_dpm_fini(rdev);
return ret;
}
So remove the cleanup in ci_parse_power_table and
move the num_ps calculation to inside the loop so ci_dpm_fini
will know how many array elements to free.
Fixes: 7c04e1dfcee1 ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Aaron Ma [Wed, 8 Jul 2020 08:16:22 +0000 (04:16 -0400)]
drm/amd/display: add dmcub check on RENOIR
RENOIR loads dmub fw not dmcu, check dmcu only will prevent loading iram,
it breaks backlight control.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208277 Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Huang Rui [Tue, 30 Jun 2020 04:32:57 +0000 (12:32 +0800)]
drm/amdgpu: add TMR destory function for psp
TMR is required to be destoried with GFX_CMD_ID_DESTROY_TMR while the
system goes to suspend. Otherwise, PSP may return the failure state
(0xFFFF007) on Gfx-2-PSP command GFX_CMD_ID_SETUP_TMR after do multiple
times suspend/resume.
Signed-off-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
arm64/alternatives: don't patch up internal branches
Commit f0702046de6e ("arm64/alternatives: use subsections for replacement
sequences") moved the alternatives replacement sequences into subsections,
in order to keep the as close as possible to the code that they replace.
Unfortunately, this broke the logic in branch_insn_requires_update,
which assumed that any branch into kernel executable code was a branch
that required updating, which is no longer the case now that the code
sequences that are patched in are in the same section as the patch site
itself.
So the only way to discriminate branches that require updating and ones
that don't is to check whether the branch targets the replacement sequence
itself, and so we can drop the call to kernel_text_address() entirely.
Fixes: f0702046de6e ("arm64/alternatives: use subsections for replacement sequences") Reported-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Alexandru Elisei <alexandru.elisei@arm.com> Link: https://lore.kernel.org/r/20200709125953.30918-1-ardb@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
When the erratum_1463225 array was introduced a sentinel at the end was
missing thus causing a KASAN: global-out-of-bounds in
is_affected_midr_range_list on arm64 error.
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.
Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: bpf@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 6c612b19d0e8 ("bpf: allow for correlation of maps and helpers in dump") Signed-off-by: Kees Cook <keescook@chromium.org>
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
The kprobe show() functions were using "current"'s creds instead
of the file opener's creds for kallsyms visibility. Fix to use
seq_file->file->f_cred.
Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Fixes: 8666c7454ab7 ("kprobes: Show address of kprobes if kallsyms does") Fixes: 6edc0cc5dfc1 ("kprobes: Show blacklist addresses as same as kallsyms does") Signed-off-by: Kees Cook <keescook@chromium.org>
In order to gain access to the open file's f_cred for kallsym visibility
permission checks, refactor the module section attributes to use the
bin_attribute instead of attribute interface. Additionally removes the
redundant "name" struct member.
kallsyms: Refactor kallsyms_show_value() to take cred
In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.
Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.
arm64: Documentation: Fix broken table in generated HTML
cpu-feature-registers.rst is missing a new line before a couple
of tables listing the visible fields, causing broken tables in
the HTML documentation generated by "make htmldocs". Fix this
by adding the missing new line.
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20200707143152.154541-1-suzuki.poulose@arm.com Signed-off-by: Will Deacon <will@kernel.org>
After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will
delay installing breakpoints, do single-step first), it won't work
correctly, and it will enter kdb due to oops.
It's because the reason gotten in kdb_stub() is not as expected, and it
seems that the ex_vector for single-step should be 0, like what arch
powerpc/sh/parisc has implemented.
Before the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
is enabled addr at ffff8000101486cc, hardtype=0 installed=0
[0]kdb> g
/ # echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc
[3]kdb> ss
After the patch:
Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry
[0]kdb> bp printk
Instruction(i) BP #0 at 0xffff8000101486cc (printk)
is enabled addr at ffff8000101486cc, hardtype=0 installed=0
[0]kdb> g
/ # echo h > /proc/sysrq-trigger
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> g
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc
[0]kdb> ss
Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8
[0]kdb>
Fixes: 8a3518d7e378 ("arm64: KGDB: Add step debugging support") Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
Will Deacon [Wed, 8 Jul 2020 21:10:01 +0000 (22:10 +0100)]
arm64: entry: Tidy up block comments and label numbers
Continually butchering our entry code with CPU errata workarounds has
led to it looking a little scruffy. Consistently used /* */ comment
style for multi-line block comments and ensure that small numeric labels
use consecutive integers.
No functional change, but the state of things was irritating.
Marc Zyngier [Mon, 6 Jul 2020 16:38:02 +0000 (17:38 +0100)]
arm64: Rework ARM_ERRATUM_1414080 handling
The current handling of erratum 1414080 has the side effect that
cntkctl_el1 can get changed for both 32 and 64bit tasks.
This isn't a problem so far, but if we ever need to mitigate another
of these errata on the 64bit side, we'd better keep the messing with
cntkctl_el1 local to 32bit tasks.
For that, make sure that on entering the kernel from a 32bit tasks,
userspace access to cntvct gets enabled, and disabled returning to
userspace, while it never gets changed for 64bit tasks.
Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200706163802.1836732-5-maz@kernel.org
[will: removed branch instructions per Mark's review comments] Signed-off-by: Will Deacon <will@kernel.org>
Marc Zyngier [Mon, 6 Jul 2020 16:38:01 +0000 (17:38 +0100)]
arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040
ARM64_WORKAROUND_1418040 requires that AArch32 EL0 accesses to
the virtual counter register are trapped and emulated by the kernel.
This makes the vdso pretty pointless, and in some cases livelock
prone.
Provide a workaround entry that limits the vdso to 64bit tasks.
Marc Zyngier [Mon, 6 Jul 2020 16:37:59 +0000 (17:37 +0100)]
arm64: Introduce a way to disable the 32bit vdso
We have a class of errata (grouped under the ARM64_WORKAROUND_1418040
banner) that force the trapping of counter access from 32bit EL0.
We would normally disable the whole vdso for such defect, except that
it would disable it for 64bit userspace as well, which is a shame.
Instead, add a new vdso_clock_mode, which signals that the vdso
isn't usable for compat tasks. This gets checked in the new
vdso_clocksource_ok() helper, now provided for the 32bit vdso.
Gavin Shan [Tue, 30 Jun 2020 07:52:27 +0000 (17:52 +1000)]
drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
The CPU mask (@tmp) should be released on failing to allocate
@cpu_groups or any of its elements. Otherwise, it leads to memory
leakage because the CPU mask variable is dynamically allocated
when CONFIG_CPUMASK_OFFSTACK is enabled.
Will Deacon [Wed, 8 Jul 2020 16:25:46 +0000 (17:25 +0100)]
KVM: arm64: Fix definition of PAGE_HYP_DEVICE
PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1
pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which
encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are
RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set.
Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits
at EL2.
Acked-by: Marc Zyngier <maz@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708162546.26176-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
Randy Dunlap [Wed, 8 Jul 2020 18:44:59 +0000 (11:44 -0700)]
Documentation: update for gcc 4.9 requirement
Update Documentation for the gcc v4.9 upgrade requirement.
Fixes: 9acd449a713c ("compiler/gcc: Raise minimum GCC version for kernel builds to 4.8") Fixes: dd264d460253 ("Raise gcc version requirement to 4.9") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'sound-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small, mostly device-specific fixes.
The significant one is the regression fix for USB-audio implicit
feedback devices due to the incorrect frame size calculation, which
landed in 5.8 and stable trees.
In addition, a few usual HD-audio and USB-audio quirks, Intel HDMI
fixes, ASoC fsl and rt5682 fixes, as well as the fix in
compress-offload partial drain operation"
* tag 'sound-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: compress: fix partial_drain completion state
ALSA: usb-audio: Add implicit feedback quirk for RTX6001
ALSA: usb-audio: add quirk for MacroSilicon MS2109
ALSA: hda/realtek: Enable headset mic of Acer Veriton N4660G with ALC269VC
ALSA: hda/realtek: Enable headset mic of Acer C20-820 with ALC269VC
ALSA: hda/realtek - Enable audio jacks of Acer vCopperbox with ALC269VC
ALSA: hda/realtek - Fix Lenovo Thinkpad X1 Carbon 7th quirk subdevice id
ALSA: hda/hdmi: improve debug traces for stream lookups
ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later
ALSA: opl3: fix infoleak in opl3
ALSA: usb-audio: Replace s/frame/packet/ where appropriate
ALSA: usb-audio: Fix packet size calculation
AsoC: amd: add missing snd- module prefix to the acp3x-rn driver kernel module
ALSA: hda - let hs_mic be picked ahead of hp_mic
ASoC: rt5682: fix the pop noise while OMTP type headset plugin
ASoC: fsl_mqs: Fix unchecked return value for clk_prepare_enable
ASoC: fsl_mqs: Don't check clock is NULL before calling clk API
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9
is a much better minimum version to target.
We have a number of workarounds for actual bugs in pre-4.9 gcc versions
(including things like internal compiler errors on ARM), but we also
have some syntactic workarounds for lacking features.
In particular, raising the minimum to 4.9 means that we can now just
assume _Generic() exists, which is likely the much better replacement
for a lot of very convoluted built-time magic with conditionals on
sizeof and/or __builtin_choose_expr() with same_type() etc.
Using _Generic also means that you will need to have a very recent
version of 'sparse', but thats easy to build yourself, and much less of
a hassle than some old gcc version can be.
The latest (in a long string) of reasons for minimum compiler version
upgrades was commit 1952a0c1962d ("efi/x86: Fix build with gcc 4").
Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on
old RHEL versions persumably also don't build their own kernels anyway.
And maybe they should cross-built or just have a little side affair with
a newer compiler?
kobject_uevent may allocate memory and it may be called while there are dm
devices suspended. The allocation may recurse into a suspended device,
causing a deadlock. We must set the noio flag when sending a uevent.
The observed deadlock was reported here:
https://www.redhat.com/archives/dm-devel/2020-March/msg00025.html
Damien Le Moal [Wed, 8 Jul 2020 00:20:22 +0000 (09:20 +0900)]
dm zoned: Fix zone reclaim trigger
Only triggering reclaim based on the percentage of unmapped cache
zones can fail to detect cases where reclaim is needed, e.g. if the
target has only 2 or 3 cache zones and only one unmapped cache zone,
the percentage of free cache zones is higher than
DMZ_RECLAIM_LOW_UNMAP_ZONES (30%) and reclaim does not trigger.
This problem, combined with the fact that dmz_schedule_reclaim() is
called from dmz_handle_bio() without the map lock held, leads to a
race between zone allocation and dmz_should_reclaim() result.
Depending on the workload applied, this race can lead to the write
path waiting forever for a free zone without reclaim being triggered.
Fix this by moving dmz_schedule_reclaim() inside dmz_alloc_zone()
under the map lock. This results in checking the need for zone reclaim
whenever a new data or buffer zone needs to be allocated.
Also fix dmz_reclaim_percentage() to always return 0 if the number of
unmapped cache (or random) zones is less than or equal to 1.
Suggested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
drivers/md/dm-zoned-reclaim.c:504:42: warning:
variable nr_rnd set but not used [-Wunused-but-set-variable]
504 | unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
| ^~~~~~
drivers/md/dm-zoned-reclaim.c:504:24: warning:
variable nr_unmap_rnd set but not used [-Wunused-but-set-variable]
504 | unsigned int p_unmap, nr_unmap_rnd = 0, nr_rnd = 0;
| ^~~~~~~~~~~~
dm: use bio_uninit instead of bio_disassociate_blkg
bio_uninit is the proper API to clean up a BIO that has been allocated
on stack or inside a structure that doesn't come from the BIO allocator.
Switch dm to use that instead of bio_disassociate_blkg, which really is
an implementation detail. Note that the bio_uninit calls are also moved
to the two callers of __send_empty_flush, so that they better pair with
the bio_init calls used to initialize them.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This turned out to be due to the fbdev device hasn't been registered when
drm_fbdev_generic_setup() is invoked. Let's fix the splat by moving it down
after drm_dev_register() which will follow the "Display driver example"
documented by commit 045838b5763e ("drm/drv: DOC: Add driver example
code").
Ralph Campbell [Fri, 26 Jun 2020 21:03:37 +0000 (14:03 -0700)]
drm/nouveau/nouveau: fix page fault on device private memory
If system memory is migrated to device private memory and no GPU MMU
page table entry exists, the GPU will fault and call hmm_range_fault()
to get the PFN for the page. Since the .dev_private_owner pointer in
struct hmm_range is not set, hmm_range_fault returns an error which
results in the GPU program stopping with a fatal fault.
Fix this by setting .dev_private_owner appropriately.
Fixes: 58d609aa32d0 ("mm/hmm: check the device private page owner in hmm_range_fault()") Cc: stable@vger.kernel.org Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ralph Campbell [Mon, 22 Jun 2020 23:38:52 +0000 (16:38 -0700)]
drm/nouveau/svm: fix migrate page regression
The patch to add zero page migration to GPU memory inadvertently included
part of a future change which broke normal page migration to GPU memory
by copying too much data and corrupting GPU memory.
Fix this by only copying one page instead of a byte count.
Fixes: 180e4dd14409 ("drm/nouveau/nouveau/hmm: fix migrate zero page to GPU") Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Chris Wilson [Mon, 6 Jul 2020 17:01:38 +0000 (18:01 +0100)]
drm/i915/gt: Pin the rings before marking active
On eviction, we acquire the vm->mutex and then wait on the vma->active.
Therefore when binding and pinning the vma, we must follow the same
sequence, lock/pin the vma then mark it active. Otherwise, we mark the
vma as active, then wait for the vm->mutex, and meanwhile the evictor
holding the mutex waits upon us to complete our activity.
Merge tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Intel PT fixes for PEBS-via-PT with registers
- Fixes for Intel PT python based GUI
- Avoid duplicated sideband events with Intel PT in system wide tracing
- Remove needless 'dummy' event from TUI menu, used when synthesizing
meta data events for pre-existing processes
- Fix corner case segfault when pressing enter in a screen without
entries in the TUI for report/top
- Fixes for time stamp handling in libtraceevent
- Explicitly set utf-8 encoding in perf flamegraph
- Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy',
silencing perf build warning
* tag 'perf-tools-fixes-2020-07-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf report TUI: Remove needless 'dummy' event from menu
perf intel-pt: Fix PEBS sample for XMM registers
perf intel-pt: Fix displaying PEBS-via-PT with registers
perf intel-pt: Fix recording PEBS-via-PT with registers
perf report TUI: Fix segmentation fault in perf_evsel__hists_browse()
tools lib traceevent: Add proper KBUFFER_TYPE_TIME_STAMP handling
tools lib traceevent: Add API to read time information from kbuffer
perf scripts python: exported-sql-viewer.py: Fix time chart call tree
perf scripts python: exported-sql-viewer.py: Fix zero id in call tree 'Find' result
perf scripts python: exported-sql-viewer.py: Fix zero id in call graph 'Find' result
perf scripts python: exported-sql-viewer.py: Fix unexpanded 'Find' result
perf record: Fix duplicated sideband events with Intel PT system wide tracing
perf scripts python: export-to-postgresql.py: Fix struct.pack() int argument
tools arch: Update arch/x86/lib/memcpy_64.S copy used in 'perf bench mem memcpy'
perf flamegraph: Explicitly set utf-8 encoding
Merge tag 'mtd/fixes-for-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
"MTD:
- Set a missing master partition panic write flag
Raw NAND:
- Fix build issue in the xway driver
- Fix a wrong return code"
* tag 'mtd/fixes-for-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: xway: Fix build issue
mtd: set master partition panic write flag
nandsim: Fix return code testing of ns_find_operation()
So far, gfs2 has taken the inode glocks inside the ->readpage and
->readahead address space operations. Since commit ee18c66e8213 ("fs:
convert mpage_readpages to mpage_readahead"), gfs2_readahead is passed
the pages to read ahead locked. With that, the current holder of the
inode glock may be trying to lock one of those pages while
gfs2_readahead is trying to take the inode glock, resulting in a
deadlock.
Fix that by moving the lock taking to the higher-level ->read_iter file
and ->fault vm operations. This also gets rid of an ugly lock inversion
workaround in gfs2_readpage.
The cache consistency model of filesystems like gfs2 is such that if
data is found in the page cache, the data is up to date and can be used
without taking any filesystem locks. If a page is not cached,
filesystem locks must be taken before populating the page cache.
To avoid taking the inode glock when the data is already cached,
gfs2_file_read_iter first tries to read the data with the IOCB_NOIO flag
set. If that fails, the inode glock is taken and the operation is
retried with the IOCB_NOIO flag cleared.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add an IOCB_NOIO flag that indicates to generic_file_read_iter that it
shouldn't trigger any filesystem I/O for the actual request or for
readahead. This allows to do tentative reads out of the page cache as
some filesystems allow, and to take the appropriate locks and retry the
reads only if the requested pages are not cached.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Merge tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- regression fix of a leak in global block reserve accounting
- fix a (hard to hit) race of readahead vs releasepage that could lead
to crash
- convert all remaining uses of comment fall through annotations to the
pseudo keyword
- fix crash when mounting a fuzzed image with -o recovery
* tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: reset tree root pointer after error in init_tree_roots
btrfs: fix reclaim_size counter leak after stealing from global reserve
btrfs: fix fatal extent_buffer readahead vs releasepage race
btrfs: convert comments to fallthrough annotations
Miquel Raynal [Fri, 26 Jun 2020 06:55:11 +0000 (08:55 +0200)]
mtd: rawnand: xway: Fix build issue
This MIPS driver does not support COMPILE_TEST yet and failed to build
under my radar.
Replace 'mtd' chich is not defined in the scope of xway_nand_remove()
by nand_to_mtd(chip). The mistake has been added in the long series
dropping nand_release().
Tested with a 7.3.0 MIPS GCC toolchain built with Buildroot.
Ming Lei [Wed, 24 Jun 2020 20:00:58 +0000 (16:00 -0400)]
dm: do not use waitqueue for request-based DM
Given request-based DM now uses blk-mq's blk_mq_queue_inflight() to
determine if outstanding IO has completed (and DM has no control over
the blk-mq state machine used to track outstanding IO) it is unsafe to
wakeup waiter (dm_wait_for_completion) before blk-mq has cleared a
request's state bits (e.g. MQ_RQ_IN_FLIGHT or MQ_RQ_COMPLETE). As
such dm_wait_for_completion() could be left to wait indefinitely if no
other requests complete.
Fix this by eliminating request-based DM's use of waitqueue to wait
for blk-mq requests to complete in dm_wait_for_completion.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Depends-on: a78f172a3069b ("blk-mq: change blk_mq_queue_busy() to blk_mq_queue_inflight()") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Vinod Koul [Mon, 29 Jun 2020 13:47:37 +0000 (19:17 +0530)]
ALSA: compress: fix partial_drain completion state
On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING
state, so set that for partially draining streams in
snd_compr_drain_notify() and use a flag for partially draining streams
While at it, add locks for stream state change in
snd_compr_drain_notify() as well.
Jian-Hong Pan [Mon, 6 Jul 2020 07:18:29 +0000 (15:18 +0800)]
ALSA: hda/realtek: Enable headset mic of Acer Veriton N4660G with ALC269VC
The Acer Veriton N4660G desktop's audio (1025:1248) with ALC269VC cannot
detect the headset microphone until ALC269VC_FIXUP_ACER_MIC_NO_PRESENCE
quirk maps the NID 0x18 as the headset mic pin.
Jian-Hong Pan [Mon, 6 Jul 2020 07:18:27 +0000 (15:18 +0800)]
ALSA: hda/realtek: Enable headset mic of Acer C20-820 with ALC269VC
The Acer Aspire C20-820 AIO's audio (1025:1065) with ALC269VC can't
detect the headset microphone until ALC269VC_FIXUP_ACER_HEADSET_MIC
quirk maps the NID 0x18 as the headset mic pin.
Jian-Hong Pan [Mon, 6 Jul 2020 07:18:25 +0000 (15:18 +0800)]
ALSA: hda/realtek - Enable audio jacks of Acer vCopperbox with ALC269VC
The Acer desktop vCopperbox with ALC269VC cannot detect the MIC of
headset, the line out and internal speaker until
ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS quirk applied.
1)
In snd_hda_pick_fixup(), quirks are first matched by PCI SSID and then, if
there is no match, by codec SSID. The Lenovo "ThinkPad X1 Carbon 7th" has
an audio chip with PCI SSID 0x2292 and codec SSID 0x2293[1]. Therefore, fix
the quirk meant for that device to match on .subdevice == 0x2292.
2)
The "Thinkpad X1 Yoga 7th" does not exist. The companion product to the
Carbon 7th is the Yoga 4th. That device has an audio chip with PCI SSID
0x2292 and codec SSID 0x2292[2]. Given the behavior of
snd_hda_pick_fixup(), it is not possible to have a separate quirk for the
Yoga based on SSID. Therefore, merge the quirks meant for the Carbon and
Yoga. This preserves the current behavior for the Yoga.
[1] This is the case on my own machine and can also be checked here
https://github.com/linuxhw/LsPCI/tree/master/Notebook/Lenovo/ThinkPad
https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3225701
[2]
https://github.com/linuxhw/LsPCI/tree/master/Convertible/Lenovo/ThinkPad
https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3176355
Fixes: ab0448b2b6c2 ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen") Fixes: 017a536c22ac ("ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen") Cc: Jaroslav Kysela <perex@perex.cz> Cc: Kailang Yang <kailang@realtek.com> Tested-by: Vincent Bernat <vincent@bernat.ch> Tested-by: Even Brenden <evenbrenden@gmail.com> Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200703080005.8942-2-benjamin.poirier@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kai Vehmanen [Fri, 3 Jul 2020 15:38:17 +0000 (18:38 +0300)]
ALSA: hda/hdmi: fix failures at PCM open on Intel ICL and later
When HDMI PCM devices are opened in a specific order, with at least one
HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the
connected monitor, on recent Intel platforms (ICL/JSL and newer). While
this is not a typical sequence, at least Pulseaudio does this every time
when it is started, to discover the available PCMs.
The rootcause is an invalid assumption in hdmi_add_pin(), where the
total number of converters is assumed to be known at the time the
function is called. On older Intel platforms this held true, but after
ICL/JSL, the order how pins and converters are in the subnode list as
returned by snd_hda_get_sub_nodes(), was changed. As a result,
information for some converters was not stored to per_pin->mux_nids.
And this means some pins cannot be connected to all converters, and
application instead gets -EBUSY instead at open.
The assumption that converters are always before pins in the subnode
list, is not really a valid one. Fix the problem in hdmi_parse_codec()
by introducing separate loops for discovering converters and pins.
Jarkko Sakkinen [Mon, 6 Jul 2020 20:53:42 +0000 (23:53 +0300)]
Revert commit 8d6b4ed86f8e ("tpm_tis: Remove the HID IFX0102")
Removing IFX0102 from tpm_tis was not a right move because both tpm_tis
and tpm_infineon use the same device ID. Revert the commit and add a
remark about a bug caused by commit aebd5d5d5aa4 ("[PATCH] tpm: add HID
module parameter").
Fixes: 8d6b4ed86f8e ("tpm_tis: Remove the HID IFX0102") Reported-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Chris Wilson [Thu, 2 Jul 2020 21:10:15 +0000 (22:10 +0100)]
drm/i915: Also drop vm.ref along error paths for vma construction
Not only do we need to release the vm.ref we acquired for the vma on the
duplicate insert branch, but also for the normal error paths, so roll
them all into one.
Reported-by: Andi Shyti <andi.shyti@intel.com> Suggested-by: Andi Shyti <andi.shyti@intel.com> Fixes: 587eefbe9921 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk
(cherry picked from commit 03fca66b7a36b52da8915341eee388267f6d5b73) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Chris Wilson [Thu, 2 Jul 2020 08:32:03 +0000 (09:32 +0100)]
drm/i915: Drop vm.ref for duplicate vma on construction
As we allow for parallel threads to create the same vma instance
concurrently, and we only filter out the duplicates upon reacquiring the
spinlock for the rbtree, we have to free the loser of the constructors'
race. When freeing, we should also drop any resource references acquired
for the redundant vma.
Ville Syrjälä [Wed, 29 Apr 2020 10:10:25 +0000 (13:10 +0300)]
drm/i915/fbc: Fix fence_y_offset handling
The current fence_y_offset calculation is broken. I think it more or
less used to do the right thing, but then I changed the plane code
to put the final x/y source offsets back into the src rectangle so
now it's just subtraacting the same value from itself. The code would
never have worked if we allowed the framebuffer to have a non-zero
offset.
Let's do this in a better way by just calculating the fence_y_offset
from the final plane surface offset. Note that we don't align the
plane surface address to fence rows so with horizontal panning there's
often a horizontal offset from the fence start to the surface address
as well. We have no way to tell the hardware about that so we just
ignore it. Based on some quick tests the invlidation still happens
correctly. I presume due to the invalidation nuking at least the full
line (or a segment of multiple lines).
Chris Wilson [Tue, 30 Jun 2020 15:27:24 +0000 (16:27 +0100)]
drm/i915: Skip stale object handle for debugfs per-file-stats
As we close a handle GEM object, we update the drm_file's idr with an
error^W NULL pointer to indicate the in-progress closure, and finally
removing it. If we read the idr directly, we may then see an invalid
object pointer, and in our debugfs per_file_stats() we therefore need
to protect against the entry being invalid.
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes and a one-liner patch to silence a sparse warning"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Stop clobbering x0 for HVC_SOFT_RESTART
KVM: arm64: PMU: Fix per-CPU access in preemptible context
KVM: VMX: Use KVM_POSSIBLE_CR*_GUEST_BITS to initialize guest/host masks
KVM: x86: Mark CR4.TSD as being possibly owned by the guest
KVM: x86: Inject #GP if guest attempts to toggle CR4.LA57 in 64-bit mode
kvm: use more precise cast and do not drop __user
KVM: x86: bit 8 of non-leaf PDPEs is not reserved
KVM: X86: Fix async pf caused null-ptr-deref
KVM: arm64: vgic-v4: Plug race between non-residency and v4.1 doorbell
KVM: arm64: pvtime: Ensure task delay accounting is enabled
KVM: arm64: Fix kvm_reset_vcpu() return code being incorrect with SVE
KVM: arm64: Annotate hyp NMI-related functions as __always_inline
KVM: s390: reduce number of IO pins to 1
Merge tag 's390-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Initialize jump labels before early command line parsing in order to
make init_on_alloc and init_on_free options work
- Fix vfio-ccw build error due to missing include
- Prevent callchain data collection with hardware sampling, since the
callchains simply do not exist
- Prevent multiple registrations of the same zPCI function
- Update defconfigs
* tag 's390-5.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Fix a build error due to missing include of linux/slab.h
s390: update defconfigs
s390/cpum_sf: prohibit callchain data collection
s390/setup: init jump labels before command line parsing
s390/maccess: add no DAT mode to kernel_write
s390/pci: fix enabling a reserved PCI function
Paolo Bonzini [Mon, 6 Jul 2020 17:05:38 +0000 (13:05 -0400)]
Merge tag 'kvmarm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm fixes for 5.8, take #3
- Disable preemption on context-switching PMU EL0 state happening
on system register trap
- Don't clobber X0 when tearing down KVM via a soft reset (kexec)
Marek Szyprowski [Tue, 30 Jun 2020 08:16:02 +0000 (10:16 +0200)]
scatterlist: protect parameters of the sg_table related macros
Add brackets to protect parameters of the recently added sg_table related
macros from side-effects.
Fixes: a3a3497eea60 ("scatterlist: add generic wrappers for iterating over sgtable objects") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
perf report TUI: Remove needless 'dummy' event from menu
Fixing the common case of:
perf record
perf report
And getting just the cycles events.
We now have a 'dummy' event to get perf metadata events that take place
while we synthesize metadata records for pre-existing processes by
traversing procfs, so we always have this extra 'dummy' evsel, but we
don't have to offer it as there will be no samples on it, remove this
distraction.
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/20200706115452.GA2772@redhat.com/ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 30 Jun 2020 13:39:34 +0000 (16:39 +0300)]
perf intel-pt: Fix displaying PEBS-via-PT with registers
After recording PEBS-via-PT, perf script will not accept 'iregs' field e.g.
# perf record -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.062 MB perf.data ]
# ./perf script --itrace=eop -F+iregs
Samples for 'dummy:u' event do not have IREGS attribute set. Cannot print 'iregs' field.
Fix by using allow_user_set, which is true when recording AUX area data.
Fixes: 676f6b998e6fa ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Luwei Kang <luwei.kang@intel.com> Link: http://lore.kernel.org/lkml/20200630133935.11150-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 30 Jun 2020 13:39:33 +0000 (16:39 +0300)]
perf intel-pt: Fix recording PEBS-via-PT with registers
When recording PEBS-via-PT, the kernel will not accept the intel_pt
event with register sampling e.g.
# perf record --kcore -c 10000 -e '{intel_pt/branch=0/,branch-loads/aux-output/ppp}' -I -- ls -l
Error:
intel_pt/branch=0/: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
Fix by suppressing register sampling on the intel_pt evsel.
Committer notes:
Adrian informed that this is only available from Tremont onwards, so on
older processors the error continues the same as before.
Fixes: 676f6b998e6fa ("perf intel-pt: Process options for PEBS event synthesis") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Luwei Kang <luwei.kang@intel.com> Link: http://lore.kernel.org/lkml/20200630133935.11150-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Scull [Mon, 6 Jul 2020 09:52:59 +0000 (10:52 +0100)]
KVM: arm64: Stop clobbering x0 for HVC_SOFT_RESTART
HVC_SOFT_RESTART is given values for x0-2 that it should installed
before exiting to the new address so should not set x0 to stub HVC
success or failure code.
Fixes: 93ef9b2d265e3 ("arm64: hyp-stub: Zero x0 on successful stub handling") Cc: stable@vger.kernel.org Signed-off-by: Andrew Scull <ascull@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200706095259.1338221-1-ascull@google.com
Marc Zyngier [Sat, 4 Jul 2020 12:30:55 +0000 (13:30 +0100)]
KVM: arm64: PMU: Fix per-CPU access in preemptible context
Commit 805c18b4ecbe ("KVM: arm64: Remove host_cpu_context
member from vcpu structure") has, by removing the host CPU
context pointer, exposed that kvm_vcpu_pmu_restore_guest
is called in preemptible contexts:
Note that the bug was always there, it is only the switch to
using percpu accessors that made it obvious.
The fix is to wrap these accesses in a preempt-disabled section,
so that we sample a coherent context on trap from the guest.
Fixes: d5e977fb33fb ("arm64: KVM: Enable VHE support for :G/:H perf event modifiers")
Cc:: Andrew Murray <amurray@thegoodpenguin.co.uk> Signed-off-by: Marc Zyngier <maz@kernel.org>
x86/ldt: use "pr_info_once()" instead of open-coding it badly
Using a mutex for "print this warning only once" is so overdesigned as
to be actively offensive to my sensitive stomach.
Just use "pr_info_once()" that already does this, although in a
(harmlessly) racy manner that can in theory cause the message to be
printed twice if more than one CPU races on that "is this the first
time" test.
[ If somebody really cares about that harmless data race (which sounds
very unlikely indeed), that person can trivially fix printk_once() by
using a simple atomic access, preferably with an optimistic non-atomic
test first before even bothering to treat the pointless "make sure it
is _really_ just once" case.
A mutex is most definitely never the right primitive to use for
something like this. ]
Yes, this is a small and meaningless detail in a code path that hardly
matters. But let's keep some code quality standards here, and not
accept outrageously bad code.
projects / kernel.git / log