The performance of the crypto fuzz tests has greatly regressed since
v5.18. When booting a kernel on an arm64 dev board with all software
crypto algorithms and CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled, the
fuzz tests now take about 200 seconds to run, or about 325 seconds with
lockdep enabled, compared to about 5 seconds before.
The root cause is that the random number generation has become much
slower due to commit 4a1538f51302 ("random32: use real rng for
non-deterministic randomness"). On my same arm64 dev board, at the time
the fuzz tests are run, get_random_u8() is about 345x slower than
prandom_u32_state(), or about 469x if lockdep is enabled.
Lockdep makes a big difference, but much of the rest comes from the
get_random_*() functions taking a *very* slow path when the CRNG is not
yet initialized. Since the crypto self-tests run early during boot,
even having a hardware RNG driver enabled (CONFIG_CRYPTO_DEV_QCOM_RNG in
my case) doesn't prevent this. x86 systems don't have this issue, but
they still see a significant regression if lockdep is enabled.
Converting the "Fully random bytes" case in generate_random_bytes() to
use get_random_bytes() helps significantly, improving the test time to
about 27 seconds. But that's still over 5x slower than before.
This is all a bit silly, though, since the fuzz tests don't actually
need cryptographically secure random numbers. So let's just make them
use a non-cryptographically-secure RNG as they did before. The original
prandom_u32() is gone now, so let's use prandom_u32_state() instead,
with an explicitly managed state, like various other self-tests in the
kernel source tree (rbtree_test.c, test_scanf.c, etc.) already do. This
also has the benefit that no locking is required anymore, so performance
should be even better than the original version that used prandom_u32().
Fixes: 4a1538f51302 ("random32: use real rng for non-deterministic randomness") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
These functions are already marked as NOKPROBE to prevent recursion and
we have the same reason to blacklist them if rethook is used with fprobe,
since they are beyond the recursion-free region ftrace can guard.
Link: https://lore.kernel.org/all/20230517034510.15639-5-zegao@tencent.com/ Fixes: 4e7590abd31d ("x86,rethook,kprobes: Replace kretprobe with rethook on x86") Signed-off-by: Ze Gao <zegao@tencent.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch replaces preempt_{disable, enable} with its corresponding
notrace version in rethook_trampoline_handler so no worries about stack
recursion or overflow introduced by preempt_count_{add, sub} under
fprobe + rethook context.
The mte_sync_page_tags() function sets PG_mte_tagged if it initializes
page tags. Then we return to mte_sync_tags(), which sets PG_mte_tagged
again. At best, this is redundant. However, it is possible for
mte_sync_page_tags() to return without having initialized tags for the
page, i.e. in the case where check_swap is true (non-compound page),
is_swap_pte(old_pte) is false and pte_is_tagged is false. So at worst,
we set PG_mte_tagged on a page with uninitialized tags. This can happen
if, for example, page migration causes a PTE for an untagged page to
be replaced. If the userspace program subsequently uses mprotect() to
enable PROT_MTE for that page, the uninitialized tags will be exposed
to userspace.
Fix it by removing the redundant call to set_page_mte_tagged().
Use "a" constraint instead of "d" constraint to pass the state parameter to
the do_sqbs() inline assembly. This prevents that general purpose register
zero is used for the state parameter.
If the compiler would select general purpose register zero this would be
problematic for the used instruction in rsy format: the register used for
the state parameter is a base register. If the base register is general
purpose register zero the contents of the register are unexpectedly ignored
when the instruction is executed.
This only applies to z/VM guests using QIOASSIST with dedicated (pass through)
QDIO-based devices such as FCP [zfcp driver] as well as real OSA or
HiperSockets [qeth driver].
A possible symptom for this case using zfcp is the following repeating kernel
message pattern:
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
Each of the qdio problem message can be accompanied by the following entries
for the affected subchannel <sc> in
/sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth:
Commit 5bc5e1759830 ("crypto: s390 - add crypto library interface for
ChaCha20") added a library interface to the s390 specific ChaCha20
implementation. However no check was added to verify if the required
facilities are installed before branching into the assembler code.
If compiled into the kernel, this will lead to the following crash,
if vector instructions are not available:
Formatting a thin-provisioned (ESE) device that is part of a PPRC copy
relation might fail with the following error:
dasd-eckd 0.0.f500: An error occurred in the DASD device driver, reason=09
[...]
24 Byte: 0 MSG 4, no MSGb to SYSOP
During format of an ESE disk the Release Allocated Space command is used.
A bit in the payload of the command is set that is not allowed to be set
for devices in a copy relation. This bit is set to allow the partial
release of an extent.
Check for the existence of a copy relation before setting the respective
bit.
Fixes: bc855f9311a4 ("s390/dasd: Add new ioctl to release space") Cc: stable@kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20230519102340.3854819-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since
nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may
cause use-after-free read if inodes are left in "garbage_list" and
released by nilfs_dispose_list() at the end of nilfs_detach_log_writer().
Fix this issue by modifying nilfs_evict_inode() to only clear inode
without additional metadata changes that use nilfs_root if the file system
is degraded to read-only or the writer is detached.
It was reported that soft dirty tracking doesn't work when using the
Radix MMU.
The tracking is supposed to work by clearing the soft dirty bit for a
mapping and then write protecting the PTE. If/when the page is written
to, a page fault occurs and the soft dirty bit is added back via
pte_mkdirty(). For example in wp_page_reuse():
Unfortunately on radix _PAGE_SOFTDIRTY is being dropped by
radix__ptep_set_access_flags(), called from ptep_set_access_flags(),
meaning the soft dirty bit is not set even though the page has been
written to.
Fix it by adding _PAGE_SOFTDIRTY to the set of bits that are able to be
changed in radix__ptep_set_access_flags().
The P360 Tiny suffers from an irq storm issue like the T490s, so add
an entry for it to tpm_tis_dmi_table, and force polling. There also
previously was a report from the previous attempt to enable interrupts
that involved a ThinkPad L490. So an entry is added for it as well.
Cc: stable@vger.kernel.org Reported-by: Peter Zijlstra <peterz@infradead.org> # P360 Tiny Closes: https://lore.kernel.org/linux-integrity/20230505130731.GO83892@hirez.programming.kicks-ass.net/ Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: e43d34820f5a ("powerpc/pseries/iommu: Make use of DDW for indirect mapping") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When DMA window is backed by 2MB TCEs, the DMA address for the mapped
page should be the offset of the page relative to the 2MB TCE. The code
was incorrectly setting the DMA address to the beginning of the TCE
range.
Mellanox driver is reporting timeout trying to ENABLE_HCA for an SR-IOV
ethernet port, when DMA window is backed by 2MB TCEs.
Fixes: f62a6bd5b287 ("powerps/pseries/dma: Add support for 2M IOMMU page size") Cc: stable@vger.kernel.org # v5.16+ Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com> Reviewed-by: Greg Joyce <gjoyce@linux.vnet.ibm.com> Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230504175913.83844-1-gbatra@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code was written prior to previous updates to this
logic for other chips. The RSC registers are part of
SMUIO which is an always on block so there is no need
to disable gfxoff. Additionally add the carryover and
preemption checks.
[why]
regGOLDEN_TSC_COUNT_LOWER/regGOLDEN_TSC_COUNT_UPPER are protected and
unaccessible under sriov.
The clock counter high bit may update during reading process.
[How]
Replace regGOLDEN_TSC_COUNT_LOWER/regGOLDEN_TSC_COUNT_UPPER with
regCP_MES_MTIME_LO/regCP_MES_MTIME_HI to get gpu clock under sriov.
Refine get gpu clock counter method to make the result more precise.
Implement get_vbios_fb_size() so we can properly reserve
the vbios splash screen to avoid potential artifacts on the
screen during the transition from the pre-OS console to the
OS console.
PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Kenneth Feng <kenneth.feng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the
request may still contain a list of 'split_realms', and we need
to skip it anyway. Or it will be parsed as a corrupt snaptrace.
After a call to console_unlock() in vcs_write() the vc_data struct can be
freed by vc_port_destruct(). Because of that, the struct vc_data pointer
must be reloaded in the while loop in vcs_write() after console_lock() to
avoid a UAF when vcs_size() is called.
Syzkaller reported a UAF in vcs_size().
BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215)
Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119
The buggy address belongs to the object at ffff8880beab8800
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 424 bytes inside of
freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00)
When `QUIRK_AUTO_CLEAR_INT` isn't set, interrupt masking should be
cleared by writing to Interrupt Mask Clear (IMR) and interrupt
status should be cleared properly at shutdown/init.
This fixes an error where interrupts are left enabled during resume
from hibernation with `CONFIG_USB4=y`.
Fixes: 468c49f44759 ("thunderbolt: Disable interrupt auto clear for rings") Cc: stable@vger.kernel.org # v6.3 Reported-by: Takashi Iwai <tiwai@suse.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217343 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
894000.serial: ttyHS1 at MMIO 0x894000 (irq = 144, base_baud = 0) is a MSM
serial serial0: tty port ttyHS1 registered
WARNING: CPU: 7 PID: 107 at kernel/irq/chip.c:241 __irq_startup+0x78/0xd8
...
qcom_geni_serial 894000.serial: serial engine reports 0 RX bytes in!
Adding UART port triggers probe of child serial devices - serdev and
eventually Qualcomm Bluetooth hci_qca driver. This opens UART port
which enables the interrupt before it got activated in
request_threaded_irq(). The issue originates in commit 70e6eaa992a3
("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") and discussion on
mailing list [1]. However the above commit does not explain why the
uart_add_one_port() is moved above requesting interrupt.
Possibly the last PCI controller-based (i.e. not a soft/winmodem)
dial-up modem one can still buy.
Looks to have a stock XR17C154 PCI UART chip for communication, but for
some reason when provisioning the PCI IDs they swapped the vendor and
subvendor IDs. Otherwise this card would have worked out of the box.
Searching online, some folks seem to not have this issue and others do,
so it is possible only some batches of cards have this error.
Create a new macro to handle the switched IDs and add support here.
Signed-off-by: Andrew Davis <afd@ti.com> Cc: stable <stable@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230420160209.28221-1-afd@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The zswap writeback mechanism can cause a race condition resulting in
memory corruption, where a swapped out page gets swapped in with data that
was written to a different page.
The race unfolds like this:
1. a page with data A and swap offset X is stored in zswap
2. page A is removed off the LRU by zpool driver for writeback in
zswap-shrink work, data for A is mapped by zpool driver
3. user space program faults and invalidates page entry A, offset X is
considered free
4. kswapd stores page B at offset X in zswap (zswap could also be
full, if so, page B would then be IOed to X, then skip step 5.)
5. entry A is replaced by B in tree->rbroot, this doesn't affect the
local reference held by zswap-shrink work
6. zswap-shrink work writes back A at X, and frees zswap entry A
7. swapin of slot X brings A in memory instead of B
The fix:
Once the swap page cache has been allocated (case ZSWAP_SWAPCACHE_NEW),
zswap-shrink work just checks that the local zswap_entry reference is
still the same as the one in the tree. If it's not the same it means that
it's either been invalidated or replaced, in both cases the writeback is
aborted because the local entry contains stale data.
Reproducer:
I originally found this by running `stress` overnight to validate my work
on the zswap writeback mechanism, it manifested after hours on my test
machine. The key to make it happen is having zswap writebacks, so
whatever setup pumps /sys/kernel/debug/zswap/written_back_pages should do
the trick.
In order to reproduce this faster on a vm, I setup a system with ~100M of
available memory and a 500M swap file, then running `stress --vm 1
--vm-bytes 300000000 --vm-stride 4000` makes it happen in matter of tens
of minutes. One can speed things up even more by swinging
/sys/module/zswap/parameters/max_pool_percent up and down between, say, 20
and 1; this makes it reproduce in tens of seconds. It's crucial to set
`--vm-stride` to something other than 4096 otherwise `stress` won't
realize that memory has been corrupted because all pages would have the
same data.
Link: https://lkml.kernel.org/r/20230503151200.19707-1-cerasuolodomenico@gmail.com Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Chris Li (Google) <chrisl@kernel.org> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Vitaly Wool <vitaly.wool@konsulko.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make mas->min and mas->max point to a node range instead of a leaf entry
range. This allows mas to still be usable after mas_empty_area() returns.
Users would get unexpected results from other operations on the maple
state after calling the affected function.
For example, x86 MAP_32BIT mmap() acts as if there is no suitable gap when
there should be one.
s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective structs
with zeros before filling them and copying them to userspace, like it's
already done for the compat versions of these structs.
In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.
When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):
int num_vcpus = atomic_read(&kvm->online_vcpus);
i = array_index_nospec(i, num_vcpus);
return xa_load(&kvm->vcpu_array, i);
Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:
In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().
However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.
This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:
vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
kvm_get_kvm(kvm);
r = create_vcpu_fd(vcpu);
if (r < 0) {
xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
kvm_put_kvm_no_destroy(kvm);
goto unlock_vcpu_destroy;
}
atomic_inc(&kvm->online_vcpus);
This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co> Cc: stable@vger.kernel.org Fixes: 1989726ca24d ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The offset of UserName is related to the address of security
buffer. To ensure the validaty of UserName, we need to compare name_off
+ name_len with secbuf_len instead of auth_msg_len.
ksmbd_smb2_check_message allows client to return one byte more, so we
need to allocate additional memory in ksmbd_conn_handler_loop to avoid
out-of-bound access.
Cc: stable@vger.kernel.org Signed-off-by: Chih-Yen Chang <cc85nod@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
clc length is now accepted to <= 8 less than length,
rather than < 8.
Solve issues on some of Axis's smb clients which send
messages where clc length is 8 bytes less than length.
The specific client was running kernel 4.19.217 with
smb dialect 3.0.2 on armv7l.
Cc: stable@vger.kernel.org Signed-off-by: Gustav Johansson <gustajo@axis.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cifs_oplock_break function we drop reference to a cfile at
the end of function, due to which close command goes on wire
after lease break acknowledgment even if file is already closed
by application but we had deferred the handle close.
If other client with limited file shareaccess waiting on lease
break ack proceeds operation on that file as soon as first client
sends ack, then we may encounter status sharing violation error
because of open handle.
Solution is to put reference to cfile(send close on wire if last ref)
and then send oplock acknowledgment to server.
Fixes: b0bdaa3bb7b9 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.") Cc: stable@kernel.org Signed-off-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oplock break may occur for different file handle than the deferred
handle. Check for inode deferred closes list, if it's not empty then
close all the deferred handles of inode because we should not cache
handles if we dont have handle lease.
Eg: If openfilelist has one deferred file handle and another open file
handle from app for a same file, then on a lease break we choose the
first handle in openfile list. The first handle in list can be deferred
handle or actual open file handle from app. In case if it is actual open
handle then today, we don't close deferred handles if we lose handle lease
on a file. Problem with this is, later if app decides to close the existing
open handle then we still be caching deferred handles until deferred close
timeout. Leaving open handle may result in sharing violation when windows
client tries to open a file with limited file share access.
So we should check for deferred list of inode and walk through the list of
deferred files in inode and close all deferred files.
Fixes: b0bdaa3bb7b9 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.") Cc: stable@kernel.org Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ieee80211_ops::sta_rc_update must be atomic, because
ieee80211_chan_bw_change() holds rcu_read lock while calling
drv_sta_rc_update(), so create a work to do original things.
Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.
To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.
Fixes: ea3f54dd9351 ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The control message provided by isotp support MSG_CMSG_COMPAT but
blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user
space on 64 bit kernels.
Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: fc89b17fe0ae ("can: isotp: support MSG_TRUNC flag when reading from socket") Link: https://lore.kernel.org/20230505110308.81087-2-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The control message provided by J1939 support MSG_CMSG_COMPAT but
blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user
space on 64 bit kernels.
Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel <o.rempel@pengutronix.de> Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: 877b9bba3266 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/20230505110308.81087-3-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.
This incorrect tracking caused unnecessary ring expansion in some
usecases which over days of use consume a lot of memory.
xhci driver tries to keep track of free transfer blocks (TRBs) on the
ring buffer, but failed to add back some cancelled transfers that were
turned into no-op operations instead of just moving past them.
This can happen if there are several queued pending transfers which
then are cancelled in reverse order.
Solve this by counting the numer of steps we move the dequeue pointer
once we complete a transfer, and add it to the number of free trbs
instead of just adding the trb number of the current transfer.
This way we ensure we count the no-op trbs on the way as well.
Fixes: 5051c39b8dfc ("xhci: remove extra loop in interrupt context") Cc: stable@vger.kernel.org Reported-by: Miller Hunter <MillerH@hearthnhome.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217242 Tested-by: Miller Hunter <MillerH@hearthnhome.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230515134059.161110-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Donghun reports that a notebook that has an AMD Ryzen 5700U but supports
S3 has problems with USB after resuming from suspend. The issue was
bisected down to commit 29ac228901e1 ("usb: pci-quirks: disable D3cold on
xhci suspend for s2idle on AMD Renoir").
As this issue only happens on S3, narrow the broken D3cold quirk to only
run in s2idle.
Fixes: 29ac228901e1 ("usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir") Reported-and-tested-by: Donghun Yoon <donghun.yoon@lge.com> Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230515134059.161110-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This depends on commit 0db213ea8eed ("usb: gadget: udc: core: Invoke
usb_gadget_connect only when started") that introduces a regression,
revert it till the issue is fixed.
This patch fixes negative indexing of buf array in pin_assignment_show
when get_current_pin_assignments returns 0 i.e. no compatible pin
assignments are found.
The CDC-ECM specification [1] requires to send the host MAC address as
an uppercase hexadecimal string in chapter "5.4 Ethernet Networking
Functional Descriptor":
The Unicode character is chosen from the set of values 30h through
39h and 41h through 46h (0-9 and A-F).
However, snprintf(.., "%pm", ..) generates a lowercase MAC address
string. While most host drivers are tolerant to this, UsbNcm.sys on
Windows 10 is not. Instead it uses a different MAC address with all
bytes set to zero including and after the first byte containing a
lowercase letter. On Windows 11 Microsoft fixed it, but apparently they
did not backport the fix.
This change fixes the issue by upper-casing the MAC to comply with the
specification.
When the dwc3 device is runtime suspended, various required clocks are in
disabled state and it is not guaranteed that access to any registers would
work. Depending on the SoC glue, a register read could be as benign as
returning 0 or be fatal enough to hang the system.
In order to prevent such scenarios of fatal errors, make sure to resume
dwc3 then allow the function to proceed.
Prevent -ETIMEDOUT error on .suspend().
e.g. If gadget driver is loaded and we are connected to a USB host,
all transfers must be stopped before stopping the controller else
we will not get a clean stop i.e. dwc3_gadget_run_stop() will take
several seconds to complete and will return -ETIMEDOUT.
Handle error cases properly in dwc3_gadget_suspend().
Simplify dwc3_gadget_resume() by using the introduced helper function.
OverCurrent condition is not standardized in the UHCI spec.
Zhaoxin UHCI controllers report OverCurrent bit active off.
In order to handle OverCurrent condition correctly, the uhci-hcd
driver needs to be told to expect the active-off behavior.
Suggested-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With faulty usb-storage devices, read/write can timeout, in that case
the SCSI layer will abort and re-issue the command. USB storage has no
internal timeout, it relies on SCSI layer aborting commands via
.eh_abort_handler() for non those responsive devices.
After two consecutive timeouts of the same command, SCSI layer calls
.eh_device_reset_handler(), without calling .eh_abort_handler() first.
The syzbot fuzzer found a problem in the usbtmc driver: When a user
submits an ioctl for a 0-length control transfer, the driver does not
check that the direction is set to OUT:
Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed
48k sample rate like other Line6 models. This patch adds the
corresponding entry to line6_parse_audio_format_rate_quirk().
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still
defined but have no prototype or caller. This causes a W=1 warning for
the missing prototypes:
net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes]
net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes]
The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING,
and I coulnd't easily figure out the right set of #ifdefs, so just
move the declarations out of the #ifdef to avoid the warning,
at a small cost in code size over a more elaborate fix.
Fixes: 66d7df6157e4 ("net: bridge: vlan options: add support for tunnel id dumping") Fixes: a56b151bc1c9 ("net: bridge: vlan options: add support for tunnel mapping set/del") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem():
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
nft_add_set_elem+0x14b0/0x2990
nf_tables_newsetelem+0x528/0xb30
Furthermore, there is a possible use-after-free while iterating,
'node' can be free'd so we need to cache the next value to use.
Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
nft_trans_FOO objects all share a common nft_trans base structure, but
trailing fields depend on the real object size. Access is only safe after
trans->msg_type check.
Check for rule type first. Found by code inspection.
The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.
ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)
Fixes: 937960e46003 ("selftests: fib_nexthops: Make ping timeout configurable") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.
Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.
Fixes: bef9c4bcc22b ("net: pcs: xpcs: convert to phylink_pcs_ops") Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/ Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.
During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().
ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication.
Fixes: d8065df560f5 ("net: iosm: shared memory IPC interface") Reported-by: Samuel Wein PhD <sam@samwein.com> Closes: https://lore.kernel.org/netdev/20230427140819.1310f4bd@kernel.org/T/ Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In igb_hash_mc_addr() the expression:
"mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.
Fixes: d49a2a41710f ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).
Fixes: 5fe9fbda56e8 ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marco Migliore <m.migliore@tiesse.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur.
Fixes: c4897a27ebe9 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached. We should prevent
it by checking tfile->detached before queuing skb.
Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would
be a small race window:
Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems. Also, we do the same kind of test for IFF_NAPI_FRAGS.
Fixes: 58810fe5fd1e ("tuntap: add ioctl to attach or detach a file form tuntap device") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error handling in tun_get_user is very scattered.
This patch unifies error handling, reduces duplication of code, and
makes the logic clearer.
Signed-off-by: Chuang Wang <nashuiliang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 82b2bc279467 ("tun: Fix memory leak for detached NAPI queue.") Signed-off-by: Sasha Levin <sashal@kernel.org>
In a SCSI request, storvsc pre-allocates space for up to
MAX_PAGE_BUFFER_COUNT physical frame numbers to be passed to Hyper-V. If
the size of the I/O request requires more PFNs, a separate memory area of
exactly the correct size is dynamically allocated.
But when the pre-allocated area is used, current code always passes
MAX_PAGE_BUFFER_COUNT PFNs to Hyper-V, even if fewer are needed. While
this doesn't break anything because the additional PFNs are always zero,
more bytes than necessary are copied into the VMBus channel ring buffer.
This takes CPU cycles and wastes space in the ring buffer. For a typical 4
Kbyte I/O that requires only a single PFN, 248 unnecessary bytes are
copied.
Fix this by setting the payload_sz based on the actual number of PFNs
required, not the size of the pre-allocated space.
Reported-by: John Starks <jostarks@microsoft.com> Fixes: e3f9bd37f43e ("scsi: storvsc: Support PAGE_SIZE larger than 4K") Signed-off-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/1684171241-16209-1-git-send-email-mikelley@microsoft.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the firmware sends us a corrupted MCC response with
n_channels much larger than the command response can be,
we might copy far too much (uninitialized) memory and
even crash if the n_channels is large enough to make it
run out of the one page allocated for the FW response.
Fix that by checking the lengths. Doing a < comparison
would be sufficient, but the firmware should be doing
it correctly, so check more strictly.
The DBGI dump is (unsurprisingly) of type DBGI, not SRAM.
This leads to bad register accesses because the union is
built differently, there's no allocation ID, and thus the
allocation ID ends up being 0x8000.
Note that this was already wrong for DRAM vs. SMEM since
they use different parts of the union, but the allocation
ID is at the same place, so it worked.
Fix all of this but set the allocation ID in a way that
the offset calculation ends up without any offset.
Lockdep points out that we can deadlock here by calling
cancel_delayed_work_sync() because that might be already
running and gotten interrupted by the NAPI soft-IRQ.
Even just calling something that can sleep is wrong in
this context though.
Luckily, it doesn't even really matter since the things
we need to do are idempotent, so just drop the _sync().
When stopping the AP, there might be a color change in progress. It
should be deactivated here, or the driver might later finalize a color
change on a stopped AP.
Fixes: 971349f67467 (mac80211: add support for BSS color change) Signed-off-by: Michael Lee <michael-cy.lee@mediatek.com> Link: https://lore.kernel.org/r/20230504080441.22958-1-michael-cy.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We need to set the correct trace variable, otherwise we're
overwriting something else instead and the right one that
we print later is not initialized.
Fixes: 33290888cfe2 ("mac80211: handle channel frequency offset") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230504134511.828474-2-gregory.greenman@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
However small the chance (increased by ftracetest), an asynchronous
interrupt can occur in between of spin_lock() and spin_unlock(),
and the interrupt routine will attempt to lock the same
&local->queue_stop_reason_lock again.
This will cause a costly reset of the CPU and the wifi device or an
altogether hang in the single CPU and single core scenario.
The only remaining spin_lock(&local->queue_stop_reason_lock) that
did not disable interrupts was patched, which should prevent any
deadlocks on the same CPU/core and the same wifi device.
This leads to a series of -53 errors
(failed to init adminq) from the IAVF.
Change the state of the vf_state field to be not active when the IAVF
is still initializing. Make sure to wait until receiving the message on
the message box to ensure that the vf is ready and initializded.
In simple terms we use the ACTIVE flag to make sure that the ice
driver knows if the iavf is ready for another reset
When hardware is reset, the VF relies on the VFGEN_RSTAT register to detect
when the VF is finished resetting. This is a tri-state register where 0
indicates a reset is in progress, 1 indicates the hardware is done
resetting, and 2 indicates that the software is done resetting.
Currently the PF driver relies on the device hardware resetting VFGEN_RSTAT
when a global reset occurs. This works ok, but it does mean that the VF
might not immediately notice a reset when the driver first detects that the
global reset is occurring.
This is also problematic for Scalable IOV, because there is no read/write
equivalent VFGEN_RSTAT register for the Scalable VSI type. Instead, the
Scalable IOV VFs will need to emulate this register.
To support this, introduce a new VF operation, clear_reset_state, which is
called when the PF driver first detects a global reset. The Single Root IOV
implementation can just write to VFGEN_RSTAT to ensure it's cleared
immediately, without waiting for the actual hardware reset to begin. The
Scalable IOV implementation will use this as part of its tracking of the
reset status to allow properly reporting the emulated VFGEN_RSTAT to the VF
driver.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 7255355a0636 ("ice: Fix ice VF reset during iavf initialization") Signed-off-by: Sasha Levin <sashal@kernel.org>
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing
warnings from the PHY library that phy_start() is called from the
RUNNING state since we are no longer stopping the PHY state machine
during bcmgenet_suspend().
Restore the call to phy_stop() but make it conditional on being called
from the close or suspend path.
Fixes: 6601d5a7c259 ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The call to phy_stop() races with the later call to phy_disconnect(),
resulting in concurrent phy_suspend() calls being run from different
CPUs. The final call to phy_disconnect() ensures that the PHY is
stopped and suspended, too.
Fixes: 6601d5a7c259 ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
can_put_echo_skb() checks for the enabled IFF_ECHO flag and the
correct ETH_P type of the given skbuff. When implementing the CAN XL
support the new check for ETH_P_CANXL has been forgotten.
Fixes: 9daf24975438 ("can: canxl: update CAN infrastructure for CAN XL frames") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently when the new channel-path is enabled, we do evaluation only
on the subchannels with a device connected on it. This is because,
in the past, if the device in the subchannel is not working or not
available, we used to unregister the subchannels. But, from the 'commit abc0177146ac ("s390/cio: dont unregister subchannel from child-drivers")'
we allow subchannels with or without an active device connected
on it. So, when we do the io_subchannel_verify, make sure that,
we are evaluating the subchannels without any device too.
Fixes: abc0177146ac ("s390/cio: dont unregister subchannel from child-drivers") Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Checking the bearer min mtu with tipc_udp_mtu_bad() only works for
IPv4 UDP bearer, and IPv6 UDP bearer has a different value for the
min mtu. This patch checks with encap_hlen + TIPC_MIN_BEARER_MTU
for min mtu, which works for both IPv4 and IPv6 UDP bearer.
Note that tipc_udp_mtu_bad() is still used to check media min mtu
in __tipc_nl_media_set(), as m->mtu currently is only used by the
IPv4 UDP bearer as its default mtu value.
Fixes: e62ef4b5b08a ("tipc: confgiure and apply UDP bearer MTU on running links") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When doing link mtu negotiation, a malicious peer may send Activate msg
with a very small mtu, e.g. 4 in Shuang's testing, without checking for
the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then
n->links[bearer_id].mtu is set to 4294967228, which is a overflow of
'4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss().
With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning:
tipc: Too large msg, purging xmit list 1 5 0 40 4!
tipc: Too large msg, purging xmit list 1 15 0 60 4!
And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in
named_distribute(), and when purging it in tipc_link_xmit(), a crash
was even caused:
This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(),
and not updating mtu if it is too small.
Fixes: 7c021f156964 ("tipc: simplify link mtu negotiation") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
As different media may requires different min mtu, and even the
same media with different net family requires different min mtu,
add tipc_bearer_min_mtu() to calculate min mtu accordingly.
This API will be used to check the new mtu when doing the link
mtu negotiation in the next patch.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 56077b56cd3f ("tipc: do not update mtu if msg_max is too small in mtu negotiation") Signed-off-by: Sasha Levin <sashal@kernel.org>
When initializing XDP in virtnet_open(), some rq xdp initialization
may hit an error causing net device open failed. However, previous
rqs have already initialized XDP and enabled NAPI, which is not the
expected behavior. Need to roll back the previous rq initialization
to avoid leaks in error unwinding of init code.
Also extract helper functions of disable and enable queue pairs.
Use newly introduced disable helper function in error unwinding and
virtnet_close. Use enable helper function in virtnet_open.
Fixes: 25f20fd3dd78 ("virtio_net: setup xdp_rxq_info") Signed-off-by: Feng Liu <feliu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: William Tu <witu@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause is:
nsh_gso_segment() use skb->network_header - nhoff to reset mac_header
in skb_gso_error_unwind() if inner-layer protocol gso fails.
However, skb->network_header may be reset by inner-layer protocol
gso function e.g. mpls_gso_segment. skb->mac_header reset by the
inaccurate network_header will be larger than skb headroom.
The empty stub functions are defined as global functions, which
causes a warning because of missing prototypes:
drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open'
drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close'
Mark them as 'static inline' to avoid the warning and to make
them behave as intended.
projects / kernel.git / log