The blamed commit did not properly convert the resource start/end format
into the DEFINE_RES_MEM_NAMED() start/length format, resulting in a
resource for vsc9959_imdio_res which is much longer than expected:
Luckily it's not big enough to exceed the size of the parent resource
(pci_resource_end(pdev, VSC9959_IMDIO_PCI_BAR)), and it doesn't overlap
with anything else that the Linux driver uses currently, so the larger
than expected size isn't a practical problem that I can see. Although it
is clearly wrong in the /proc/iomem output.
Fixes: cfc274ac98e3 ("net: dsa: felix: use DEFINE_RES_MEM_NAMED for resources") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
During the refactoring in the commit below, vsc9953_mdio_read() was
replaced with mscc_miim_read(), which has one extra step: it checks for
the MSCC_MIIM_DATA_ERROR bits before returning the result.
On T1040RDB, there are 8 QSGMII PCSes belonging to the switch, and they
are organized in 2 groups. First group responds to MDIO addresses 4-7
because QSGMIIACR1[MDEV_PORT] is 1, and the second group responds to
MDIO addresses 8-11 because QSGMIIBCR1[MDEV_PORT] is 2. I have double
checked that these values are correctly set in the SERDES, as well as
PCCR1[QSGMA_CFG] and PCCR1[QSGMB_CFG] are both 0b01.
As can be seen, the data in MIIM_DATA is still valid despite having the
MSCC_MIIM_DATA_ERROR bits set. The driver as introduced in commit a83ee1de50e3 ("net: dsa: felix: introduce support for Seville VSC9953
switch") was ignoring these bits, perhaps deliberately (although
unbeknownst to me).
This is an old IP and the hardware team cannot seem to be able to help
me track down a plausible reason for these failures. I'll keep
investigating, but in the meantime, this is a direct regression which
must be restored to a working state.
The only thing I can do is keep ignoring the errors as before.
Fixes: 071f16fa89f0 ("net: dsa: ocelot: felix: utilize shared mscc-miim driver for indirect MDIO access") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action sample ... index 1
tc filter add ... action pedit index 1
In the current code for act_sample this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action
ok 3 334b - Add valid sample action with mandatory arguments and drop control action
ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index
Fixes: fde70ae9fd2f ("net/sched: Introduce sample tc action") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action mpls ... index 1
tc filter add ... action mpls index 1
In the current code for act_mpls this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..53
ok 1 a933 - Add MPLS dec_ttl action with pipe opcode
ok 2 08d1 - Add mpls dec_ttl action with pass opcode
ok 3 d786 - Add mpls dec_ttl action with drop opcode
ok 4 f334 - Add mpls dec_ttl action with reclassify opcode
ok 5 29bd - Add mpls dec_ttl action with continue opcode
ok 6 48df - Add mpls dec_ttl action with jump opcode
ok 7 62eb - Add mpls dec_ttl action with trap opcode
ok 8 09d2 - Add mpls dec_ttl action with opcode and cookie
ok 9 c170 - Add mpls dec_ttl action with opcode and cookie of max length
ok 10 9118 - Add mpls dec_ttl action with invalid opcode
ok 11 6ce1 - Add mpls dec_ttl action with label (invalid)
ok 12 352f - Add mpls dec_ttl action with tc (invalid)
ok 13 fa1c - Add mpls dec_ttl action with ttl (invalid)
ok 14 6b79 - Add mpls dec_ttl action with bos (invalid)
ok 15 d4c4 - Add mpls pop action with ip proto
ok 16 91fb - Add mpls pop action with ip proto and cookie
ok 17 92fe - Add mpls pop action with mpls proto
ok 18 7e23 - Add mpls pop action with no protocol (invalid)
ok 19 6182 - Add mpls pop action with label (invalid)
ok 20 6475 - Add mpls pop action with tc (invalid)
ok 21 067b - Add mpls pop action with ttl (invalid)
ok 22 7316 - Add mpls pop action with bos (invalid)
ok 23 38cc - Add mpls push action with label
ok 24 c281 - Add mpls push action with mpls_mc protocol
ok 25 5db4 - Add mpls push action with label, tc and ttl
ok 26 7c34 - Add mpls push action with label, tc ttl and cookie of max length
ok 27 16eb - Add mpls push action with label and bos
ok 28 d69d - Add mpls push action with no label (invalid)
ok 29 e8e4 - Add mpls push action with ipv4 protocol (invalid)
ok 30 ecd0 - Add mpls push action with out of range label (invalid)
ok 31 d303 - Add mpls push action with out of range tc (invalid)
ok 32 fd6e - Add mpls push action with ttl of 0 (invalid)
ok 33 19e9 - Add mpls mod action with mpls label
ok 34 1fde - Add mpls mod action with max mpls label
ok 35 0c50 - Add mpls mod action with mpls label exceeding max (invalid)
ok 36 10b6 - Add mpls mod action with mpls label of MPLS_LABEL_IMPLNULL (invalid)
ok 37 57c9 - Add mpls mod action with mpls min tc
ok 38 6872 - Add mpls mod action with mpls max tc
ok 39 a70a - Add mpls mod action with mpls tc exceeding max (invalid)
ok 40 6ed5 - Add mpls mod action with mpls ttl
ok 41 77c1 - Add mpls mod action with mpls ttl and cookie
ok 42 b80f - Add mpls mod action with mpls max ttl
ok 43 8864 - Add mpls mod action with mpls min ttl
ok 44 6c06 - Add mpls mod action with mpls ttl of 0 (invalid)
ok 45 b5d8 - Add mpls mod action with mpls ttl exceeding max (invalid)
ok 46 451f - Add mpls mod action with mpls max bos
ok 47 a1ed - Add mpls mod action with mpls min bos
ok 48 3dcf - Add mpls mod action with mpls bos exceeding max (invalid)
ok 49 db7c - Add mpls mod action with protocol (invalid)
ok 50 b070 - Replace existing mpls push action with new ID
ok 51 95a9 - Replace existing mpls push action with new label, tc, ttl and cookie
ok 52 6cce - Delete mpls pop action
ok 53 d138 - Flush mpls actions
Fixes: f7bf516dcff7 ("net: sched: add mpls manipulation actions to TC") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action pedit ... index 1
tc filter add ... action pedit index 1
In the current code for act_pedit this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..69
ok 1 319a - Add pedit action that mangles IP TTL
ok 2 7e67 - Replace pedit action with invalid goto chain
ok 3 377e - Add pedit action with RAW_OP offset u32
ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16
ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID)
ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value
ok 8 2893 - Add pedit action with RAW_OP offset u8 quad
ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8
ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value
ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value
ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value
ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value
ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value
ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value
ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value
ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value
ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value
ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value
ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value
ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src
ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst
ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst
ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID)
ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID)
ok 32 ab06 - Add pedit action with LAYERED_OP eth add type
ok 33 918d - Add pedit action with LAYERED_OP eth invert src
ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst
ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type
ok 36 7588 - Add pedit action with LAYERED_OP ip set src
ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst
ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst
ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set
ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields
ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields
ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos
ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence
ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos
ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence
ok 49 438e - Add pedit action with LAYERED_OP ip clear tos
ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence
ok 51 824a - Add pedit action with LAYERED_OP ip invert tos
ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence
ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code
ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
ok 56 815c - Add pedit action with LAYERED_OP ip6 set src
ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst
ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class
ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit
ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport
ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set
ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields
ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1
ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2
Fixes: 30a225a4c8f2 ("net/act_pedit: Support using offset relative to the conventional network headers") Fixes: 81430f06a999 ("net/sched: act_pedit: fix WARN() in the traffic path") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The software pedit action didn't get the same love as some of the
other actions and it's still using spinlocks and shared stats in the
datapath.
Transition the action to rcu and percpu stats as this improves the
action's performance dramatically on multiple cpu deployments.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 66b12dc272c2 ("net/sched: act_pedit: fix action bind logic") Signed-off-by: Sasha Levin <sashal@kernel.org>
The callback context for sending/receiving APDUs to/from the selected
secure element is allocated inside nfc_genl_se_io and supposed to be
eventually freed in se_io_cb callback function. However, there are several
error paths where the bwi_timer is not charged to call se_io_cb later, and
the cb_context is leaked.
The patch proposes to free the cb_context explicitly on those error paths.
At the moment we can't simply check 'dev->ops->se_io()' return value as it
may be negative in both cases: when the timer was charged and was not.
Fixes: 93b728042fb4 ("NFC: netlink: SE API implementation") Reported-by: syzbot+df64c0a2e8d68e78a4fa@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current _ext4_show_options() do not distinguish MOPT_2 flag, so it mixed
extend sbi->s_mount_opt2 options with sbi->s_mount_opt, it could lead to
show incorrect options, e.g. show fc_debug_force if we mount with
errors=continue mode and miss it if we set.
Fixes: 406f14bf7b69 ("ext4: add fast_commit feature and handling for extended mount options") Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230129034939.3702550-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
On success, mlx5_geneve_tlv_option_create returns non negative
Geneve object id. In case the object id is positive value the
caller functions will handle it as an error (non zero) and
will fail to offload the Geneve rule.
Fix this by changing caller function ,mlx5_geneve_tlv_option_add,
to return 0 in case valid non negative object id was provided.
Currently, during the early stages of their unloading, particularly
during SRIOV disablement, PFs/ECPFs wait on the release of all of
their VFs memory pages. Furthermore, ECPFs are considered the page
supplier for host VFs, hence the host VFs memory pages are freed only
during ECPF cleanup when host interfaces get disabled.
Thus, disabling SRIOV early in unload timeline causes the DPU ECPF
to stall on driver unload while waiting on the release of host VF pages
that won't be freed before host interfaces get disabled later on.
Therefore, for ECPFs, wait on the release of VFs pages only after the
disablement of host PFs during ECPF cleanup flow. Then, host PFs and VFs
are disabled and their memory shall be freed accordingly.
Fifo indexes are not checked during pop operations and it leads to
potential use-after-free when poping from empty queue. Such case was
possible during re-sync action. WARN_ON_ONCE covers future cases.
There were out-of-order cqe spotted which lead to drain of the queue and
use-after-free because of lack of fifo pointers check. Special check and
counter are added to avoid resync operation if SKB could not exist in the
fifo because of OOO cqe (skb_id must be between consumer and producer
index).
During ptp resync operation SKBs were poped from the fifo but were never
freed neither by napi_consume nor by dev_kfree_skb_any. Add call to
napi_consume_skb to properly free SKBs.
Another leak was happening because mlx5e_skb_fifo_has_room() had an error
in the check. Comparing free running counters works well unless C promotes
the types to something wider than the counter. In this case counters are
u16 but the result of the substraction is promouted to int and it causes
wrong result (negative value) of the check when producer have already
overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue.
Fixes: 2037d365f6e3 ("net/mlx5e: Add resiliency for PTP TX port timestamp") Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When down_interruptible() or ib_post_send() failed in rdma_request(),
receive dma buffer is not unmapped. Add unmap action to error path.
Also if ib_post_recv() failed in post_recv(), dma buffer is not unmapped.
Add unmap action to error path.
Link: https://lkml.kernel.org/r/20230104020424.611926-1-shaozhengchao@huawei.com Fixes: 5b5ab164b3f3 ("9p: rdma: RDMA Transport Support for 9P") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Today the connection sequence of the Xen 9pfs frontend doesn't match
the documented sequence. It can work reliably only for a PV 9pfs device
having been added at boot time already, as the frontend is not waiting
for the backend to have set its state to "XenbusStateInitWait" before
reading the backend properties from Xenstore.
Fix that by following the documented sequence [1] (the documentation
has a bug, so the reference is for the patch fixing that).
When connecting the Xen 9pfs frontend to the backend, the "versions"
Xenstore entry written by the backend is parsed in a wrong way.
The "versions" entry is defined to contain the versions supported by
the backend separated by commas (e.g. "1,2"). Today only version "1"
is defined. Unfortunately the frontend doesn't look for "1" being
listed in the entry, but it is expecting the entry to have the value
"1".
This will result in failure as soon as the backend will support e.g.
versions "1" and "2".
Fix that by scanning the entry correctly.
Link: https://lkml.kernel.org/r/20230130113036.7087-2-jgross@suse.com Fixes: e01cba69d3a9 ("xen/9pfs: connect to the backend") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a driver is dropping a packet by calling dev_kfree_skb_any()
we should propagate the drop reason instead of pretending
the packet was consumed.
Note: Now we have enum skb_drop_reason we could remove
enum skb_free_reason (for linux-6.4)
v2: added an unlikely(), suggested by Yunsheng Lin.
Fixes: 6630035b286c ("net: introduce dev_consume_skb_any()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the typo/copy-paste error by replacing struct variable ah_esp_mask name
by ah_esp_hdr.
Issue identified using doublebitand.cocci Coccinelle semantic patch.
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
devm_request_region is for I/O regions. Use devm_request_mem_region
instead. This fixes the driver failing to probe since 503e2412859a
("sunhme: fix an IS_ERR() vs NULL check in probe"), which checked the
result.
Fixes: f000b42388b7 ("sunhme: switch to devres") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230222204242.2658247-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When checksum offload is disabled in the driver via ethtool,
the PTP 1-step sync packets contain incorrect checksum, since
the stack calculates the checksum before driver updates
PTP timestamp field in the packet. This results in PTP packets
getting dropped at the other end. This patch fixes the issue by
re-calculating the UDP checksum after updating PTP
timestamp field in the driver.
Fixes: 3981d7f8bf1f ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Sai Krishna <saikrishnag@marvell.com> Link: https://lore.kernel.org/r/20230222113600.1965116-1-saikrishnag@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In function rt6_nlmsg_size(), the length of nexthop is calculated
by multipling the nexthop length of fib6_info and the number of
siblings. However if the fib6_info has no lwtunnel but the siblings
have lwtunnels, the nexthop length is less than it should be, and
it will trigger a warning in inet6_rt_notify() as follows:
Inserting a Kconfig symbol that does not have a dependency (DRM_I915_GVT)
into a list of other symbols that do have a dependency (on DRM_I915)
breaks the driver menu presentation in 'make *config'.
Relocate the DRM_I915_GVT symbol so that it does not cause this
problem.
Fixes: 30e92fa8cf42 ("drm/i915/gvt: move the gvt code into kvmgt.ko") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: intel-gvt-dev@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20230215044533.4847-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
vclocks were using spinlocks to protect access to its timecounter and
cyclecounter. Access to timecounter/cyclecounter is backed by the same
driver callbacks that are used for non-virtual PHCs, but the usage of
the spinlock imposes a new limitation that didn't exist previously: now
they're called in atomic context so they mustn't sleep.
Some drivers like sfc or ice may sleep on these callbacks, causing
errors like "BUG: scheduling while atomic: ptp5/25223/0x00000002"
Fix it replacing the vclock's spinlock by a mutex. It fix the mentioned
bug and it doesn't introduce longer delays.
I've tested synchronizing various different combinations of clocks:
- vclock->sysclock
- sysclock->vclock
- vclock->vclock
- hardware PHC in different NIC -> vclock
- created 4 vclocks and launch 4 parallel phc2sys processes with
lockdep enabled
In all cases, comparing the delays reported by phc2sys, they are in the
same range of values than before applying the patch.
there is no freeing of the counter block on xt_register_table fail.
Note: xt_percpu_counter_free should be called to free it like we do in
do_replace through cleanup_entry helper (or in __ip6t_unregister_table).
Probability of hitting this error path is low AFAICS (xt_register_table
can only return ENOMEM here, as it is not replacing anything, as we are
creating new netns, and it is hard to imagine that all previous
allocations succeeded and after that one in xt_register_table failed).
But it's worth fixing even the rare leak.
Fixes: b4fefa225123 ("netfilter: xtables: use percpu rule counters") Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pernet tracking doesn't work correctly because other netns might have
set NETLINK_LISTEN_ALL_NSID on its event socket.
In this case its expected that events originating in other net
namespaces are also received.
Making pernet-tracking work while also honoring NETLINK_LISTEN_ALL_NSID
requires much more intrusive changes both in netlink and nfnetlink,
f.e. adding a 'setsockopt' callback that lets nfnetlink know that the
event socket entered (or left) ALL_NSID mode.
Move to global tracking instead: if there is an event socket anywhere
on the system, all net namespaces which have conntrack enabled and
use autobind mode will allocate the ecache extension.
netlink_has_listeners() returns false only if the given group has no
subscribers in any net namespace, the 'net' argument passed to
nfnetlink_has_listeners is only used to derive the protocol (nfnetlink),
it has no other effect.
For proper NETLINK_LISTEN_ALL_NSID-aware pernet tracking of event
listeners a new netlink_has_net_listeners() is also needed.
For IPv6 Jumbo packets, the ipv6_hdr(skb)->payload_len is always 0,
and its real payload_len ( > 65535) is saved in hbh exthdr. With 0
length for the jumbo packets, it may mismatch.
To fix this, we can just use skb->len instead of parsing exthdrs, as
the hbh exthdr parsing has been done before coming to length_mt6 in
ip6_rcv_core() and br_validate_ipv6() and also the packet has been
trimmed according to the correct IPv6 (ext)hdr length there, and skb
len is trustable in length_mt6().
Note that this patch is especially needed after the IPv6 BIG TCP was
supported in kernel, which is using IPv6 Jumbo packets. Besides, to
match the packets greater than 65535 more properly, a v1 revision of
xt_length may be needed to extend "min, max" to u32 in the future,
and for now the IPv6 Jumbo packets can be matched by:
# ip6tables -m length ! --length 0:65535
Fixes: f4d2f29901ff ("net: allow gso_max_size to exceed 65536") Fixes: 12478a2acbca ("net: allow gro_max_size to exceed 65536") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When calling ip6_route_lookup() for the packet arriving on the VRF
interface, the result is always the real (slave) interface. Expect this
when validating the result.
Fixes: f4ca96aadd077 ("netfilter: rpfilter/fib: Populate flowic_l3mdev field") Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
nf_conntrack_hash_check_insert() callers free the ct entry directly, via
nf_conntrack_free.
This isn't safe anymore because
nf_conntrack_hash_check_insert() might place the entry into the conntrack
table and then delteted the entry again because it found that a conntrack
extension has been removed at the same time.
In this case, the just-added entry is removed again and an error is
returned to the caller.
Problem is that another cpu might have picked up this entry and
incremented its reference count.
This results in a use-after-free/double-free, once by the other cpu and
once by the caller of nf_conntrack_hash_check_insert().
Fix this by making nf_conntrack_hash_check_insert() not fail anymore
after the insertion, just like before the 'Fixes' commit.
This is safe because a racing nf_ct_iterate() has to wait for us
to release the conntrack hash spinlocks.
While at it, make the function return -EAGAIN in the rmmod (genid
changed) case, this makes nfnetlink replay the command (suggested
by Pablo Neira).
Make sure to honour the max_hw_heartbeat_ms while programming the timeout
value to WOR. Clamp the timeout passed to sbsa_gwdt_set_timeout() to
make sure the programmed value is within the permissible range.
Fixes: bfa20b6092f4 ("watchdog: sbsa: Support architecture version 1") Signed-off-by: George Cherian <george.cherian@marvell.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230209021117.1512097-1-george.cherian@marvell.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The stack variable msb and lsb may be used uninitialized in function
usb_pcwd_get_temperature and usb_pcwd_get_timeleft when usb card no response.
The build waring is:
drivers/watchdog/pcwd_usb.c:336:22: error: ‘lsb’ is used uninitialized in this function [-Werror=uninitialized]
*temperature = (lsb * 9 / 5) + 32;
~~~~^~~
drivers/watchdog/pcwd_usb.c:328:21: note: ‘lsb’ was declared here
unsigned char msb, lsb;
^~~
cc1: all warnings being treated as errors
scripts/Makefile.build:250: recipe for target 'drivers/watchdog/pcwd_usb.o' failed
make[3]: *** [drivers/watchdog/pcwd_usb.o] Error 1
Fixes: 86dfb2deef25 ("mv watchdog tree under drivers") Signed-off-by: Li Hua <hucool.lihua@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221116020706.70847-1-hucool.lihua@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As per section 48.4 of the HW User Manual, IPs in the RZ/V2M
SoC need either a TYPE-A reset sequence or a TYPE-B reset
sequence. More specifically, the watchdog IP needs a TYPE-B
reset sequence.
If the proper reset sequence isn't implemented, then resetting
IPs may lead to undesired behaviour. In the restart callback of
the watchdog driver the reset has basically no effect on the
desired funcionality, as the register writes following the reset
happen before the IP manages to come out of reset.
Implement the TYPE-B reset sequence in the watchdog driver to
address the issues with the restart callback on RZ/V2M.
On RZ/Five SoC it was observed that setting timeout (to say 1 sec) wouldn't
reset the system.
The procedure described in the HW manual (Procedure for Activating Modules)
for activating the target module states we need to start supply of the
clock module before applying the reset signal. This patch makes sure we
follow the same procedure to clear the registers of the WDT module, fixing
the issues seen on RZ/Five SoC.
While at it re-used rzg2l_wdt_stop() in rzg2l_wdt_set_timeout() as it has
the same function calls.
To fix a race condition between atomic write aborts, I use the inode
lock and make COW inode to be re-usable thoroughout the whole
atomic file inode lifetime.
Reported-by: syzbot+823000d23b3400619f7c@syzkaller.appspotmail.com Fixes: 4e9d6358004f ("f2fs: change the current atomic write way") Signed-off-by: Daeho Jeong <daehojeong@google.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We should not be calling virtio_break_device from an IRQ context.
Move breaking the device into the workqueue so that it is done from
a reasonable context.
Fixes: 771c89cc2180 ("um: virtio_uml: Fix broken device handling in time-travel") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark the device as not registered anymore when scheduling the work to
remove it. Otherwise we could end up scheduling the work multiple times
in a row, including scheduling it while it is already running.
Fixes: 771c89cc2180 ("um: virtio_uml: Fix broken device handling in time-travel") Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'syscall' instruction clobbers '%rcx' and '%r11', but they are not
listed in the inline Assembly that performs the syscall instruction.
No real bug is found. It wasn't buggy by luck because '%rcx' and '%r11'
are caller-saved registers, and not used in the functions, and the
functions are never inlined.
Add them to the clobber list for code correctness.
Fixes: 07717e169e6225855229638f3890b3970fda80d5 ("um: implement a x86_64 vDSO") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
NFT_MSG_GETSETELEM returns -EPERM when fetching set elements that belong
to table that has an owner. This results in empty set/map listing from
userspace.
If commit interval is 0, it means using default value.
Fixes: b02163188675 ("ext4: get rid of super block and sbi from handle_mount_ops()") Signed-off-by: Wang Jianjian <wangjianjian3@huawei.com> Link: https://lore.kernel.org/r/20221219015128.876717-1-wangjianjian3@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
To avoid 'sparse' warnings about missing endianness conversions, don't
store native endianness values into struct ext4_fc_tl. Instead, use a
separate struct type, ext4_fc_tl_mem.
Fixes: c9df516c7f6b ("ext4: factor out ext4_fc_get_tl()") Cc: Ye Bin <yebin10@huawei.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221217050212.150665-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
This driver relies on SMEM to populate items for each subsystem before
the device probes. The items in SMEM that are being looked for are
populated by the subsystems lazily, and therefore may not exist until
the device has booted. For example, if I build this driver into the
kernel on Trogdor Lazor and boot up, I don't see a 'modem' debugfs file
populated, because the modem boots and populates the SMEM item after
this driver probes.
Always populate the files for the subsystems if they're in SMEM, and
make the qcom_subsystem_sleep_stats_show() function return 0 if the SMEM
items still isn't there. This way we can run a simple command like
grep ^ /sys/kernel/debug/qcom_stats/*
and collect the subsystem sleep stats without interspersed errors or
missing details entirely because this driver probed first.
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND
7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0
Fix it by:
1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has
been removed from 'ubi->lookuptbl'.
2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an
use-after-free problem for wl entry in ubi_wl_put_peb().
Fetch a reproducer in [Link].
Fixes: 55446cd8a30c407 ("UBI: bugfix: protect from volume removal") Fixes: 319e220aa904b01 ("UBI: Fix stale pointers in ubi->lookuptbl") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216111 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Wear-leveling entry updating/accessing in ubi->lookuptbl should be
protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize
wl entry accessing between wl_entry_destroy() and
eraseblk_count_seq_show().
After disabling fastmap(ubi->fm_disabled = 1), fastmap won't be updated,
fm_anchor PEB is missed being scheduled for erasing. Besides, fm_anchor
PEB may have smallest erase count, it doesn't participate wear-leveling.
The difference of erase count between fm_anchor PEB and other PEBs will
be larger and larger later on.
In which situation fastmap can be disabled? Initially, we have an UBI
image with fastmap. Then the image will be atttached without module
parameter 'fm_autoconvert', ubi turns to full scanning mode in one
random attaching process(eg. bad fastmap caused by powercut), ubi
fastmap is disabled since then.
Fix it by not getting fm_anchor if fastmap is disabled in
ubi_refill_pools().
There are two states for ubifs writing pages:
1. Dirty, Private
2. Not Dirty, Not Private
The normal process cannot go to ubifs_releasepage() which means there
exists pages being private but not dirty. Reproducer[1] shows that it
could occur (which maybe related to [2]) with following process:
PA PB PC
lock(page)[PA]
ubifs_write_end
attach_page_private // set Private
__set_page_dirty_nobuffers // set Dirty
unlock(page)
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fix it by adding copied znode back to tnc, then it will be freed
by ubifs_destroy_tnc_subtree() while closing tnc.
Dirty znodes will be written on flash in committing process with
following states:
process A | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
layout_commit | DIRTY_ZNODE | COW_ZNODE
fill_gap | 0
write master | 0 or OBSOLETE_ZNODE
process B | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE[1]
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
ubifs_tnc_end_commit | DIRTY_ZNODE | COW_ZNODE
write_index | 0
write master | 0 or OBSOLETE_ZNODE[2] or
| DIRTY_ZNODE[3]
[1] znode is dirtied without concurrent committing process
[2] znode is copied up (re-dirtied by other process) before cleaned
up in committing process
[3] znode is re-dirtied after cleaned up in committing process
Currently, the clean znode count is updated in free_obsolete_znodes(),
which is called only in normal path. If do_commit failed, clean znode
count won't be updated, which triggers a failure ubifs assertion[4] in
ubifs_tnc_close():
ubifs_assert_failed [ubifs]: UBIFS assert failed: freed == n
[4] Commit 2c449a8afc3d71 ("UBIFS: Add an assertion for clean_zn_cnt").
Fix it by re-statisticing cleaned znode count in tnc_destroy_cnext().
It willl cause null-ptr-deref in the following case:
uif_init()
ubi_add_volume()
cdev_add() -> if it fails, call kill_volumes()
device_register()
kill_volumes() -> if ubi_add_volume() fails call this function
ubi_free_volume()
cdev_del()
device_unregister() -> trying to delete a not added device,
it causes null-ptr-deref
So in ubi_free_volume(), it delete devices whether they are added
or not, it will causes null-ptr-deref.
Handle the error case whlie calling ubi_add_volume() to fix this
problem. If add volume fails, set the corresponding vol to null,
so it can not be accessed in kill_volumes() and release the
resource in ubi_add_volume() error path.
The problem is that the ubifs_wbuf_init() returns an error in the
loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes
that were successfully alloced before are not freed.
Fix it by adding error hanging path in alloc_wbufs() which frees
the memory alloced before when ubifs_wbuf_init() returns an error.
Fixes: 974763da840d ("UBIFS: add new flash file system") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is due to a mismatch between create and destroy interfaces, and
in detail that "new_eba_tbl" created by ubi_eba_create_table() but
destroyed by kfree(), while will causing "new_eba_tbl->entries" not
freed.
Fix it by replacing kfree(new_eba_tbl) with
ubi_eba_destroy_table(new_eba_tbl)
There is an use-after-free problem reported by KASAN:
==================================================================
BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi]
Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735
When ubi_change_vtbl_record() returns an error in ubi_resize_volume(),
"new_eba_tbl" will be freed on error handing path, but it is holded
by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle
of "vol->eba_tbl" and "vol" are different, so when resizing volume in
next time, it causing an use-after-free fault.
Fix it by not freeing "new_eba_tbl" after it replaced in
ubi_eba_replace_table(), while will be freed in next volume resizing.
UBIFS calculates available space by c->main_bytes - c->lst.total_used
(which means non-index lebs' free and dirty space is accounted into
total available), then index lebs and four lebs (one for gc_lnum, one
for deletions, two for journal heads) are deducted.
In following situation, ubifs may get -ENOSPC from make_reservation():
LEB 84: DATAHD free 122880 used 1920 dirty 2176 dark 6144
LEB 110:DELETION free 126976 used 0 dirty 0 dark 6144 (empty)
LEB 201:gc_lnum free 126976 used 0 dirty 0 dark 6144
LEB 272:GCHD free 77824 used 47672 dirty 1480 dark 6144
LEB 356:BASEHD free 0 used 39776 dirty 87200 dark 6144
OTHERS: index lebs, zero-available non-index lebs
UBIFS calculates the available bytes is 6888 (How to calculate it:
126976 * 5[remain main bytes] - 1920[used] - 47672[used] - 39776[used] -
126976 * 1[deletions] - 126976 * 1[gc_lnum] - 126976 * 2[journal heads]
- 6144 * 5[dark] = 6888) after doing budget, however UBIFS cannot use
BASEHD's dirty space(87200), because UBIFS cannot find next BASEHD to
reclaim current BASEHD. (c->bi.min_idx_lebs equals to c->lst.idx_lebs,
the empty leb won't be found by ubifs_find_free_space(), and dirty index
lebs won't be picked as gced lebs. All non-index lebs has dirty space
less then c->dead_wm, non-index lebs won't be picked as gced lebs
either. So new free lebs won't be produced.). See more details in Link.
To fix it, reserve one leb for each journal head while doing budget.
If target inode is a special file (eg. block/char device) with nlink
count greater than 1, the inode with ui->data will be re-written on
disk. However, UBIFS losts target inode's data_len while doing space
budget. Bad space budget may let make_reservation() return with -ENOSPC,
which could turn ubifs to read-only mode in do_writepage() process.
Each dirty inode should reserve 'c->bi.inode_budget' bytes in space
budget calculation. Currently, space budget for dirty inode reports
more space than what UBIFS actually needs to write.
Fixes: 974763da840dbf ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no space budget for ubifs_xrename(). It may let
make_reservation() return with -ENOSPC, which could turn
ubifs to read-only mode in do_writepage() process.
Fix it by adding space budget for ubifs_xrename().
Fix bad space budget when symlink file is encrypted. Bad space budget
may let make_reservation() return with -ENOSPC, which could turn ubifs
to read-only mode in do_writepage() process.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216490 Fixes: eeebf7b0eadbcb ("ubifs: Add support for encrypted symlinks") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
With CONFIG_UBIFS_FS_AUTHENTICATION not set, the compiler can assume that
ubifs_node_check_hash() is never true and drops the call to ubifs_bad_hash().
Is CONFIG_CC_OPTIMIZE_FOR_SIZE enabled this optimization does not happen anymore.
So When CONFIG_UBIFS_FS and CONFIG_CC_OPTIMIZE_FOR_SIZE is enabled but
CONFIG_UBIFS_FS_AUTHENTICATION is not set, the build errors is as followd:
ERROR: modpost: "ubifs_bad_hash" [fs/ubifs/ubifs.ko] undefined!
Fix it by add no-op ubifs_bad_hash() for the CONFIG_UBIFS_FS_AUTHENTICATION=n case.
Fixes: da7458a739d6 ("ubifs: authentication: Add hashes to index nodes") Signed-off-by: Li Hua <hucool.lihua@huawei.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure that the VID header offset + VID header size does not exceed
the allocated area to avoid slab OOB.
BUG: KASAN: slab-out-of-bounds in crc32_body lib/crc32.c:111 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_generic lib/crc32.c:179 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_base+0x58c/0x626 lib/crc32.c:197
Read of size 4 at addr ffff88802bb36f00 by task syz-executor136/1555
The buggy address belongs to the object at ffff88802bb36e00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
256-byte region [ffff88802bb36e00, ffff88802bb36f00)
Memory state around the buggy address: ffff88802bb36e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88802bb36e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88802bb36f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff88802bb36f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88802bb37000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Commit 0e0c433c381f ("f2fs: don't give partially written atomic data
from process crash") attempted to drop atomic write data after process
crash, however, f2fs_abort_atomic_write() may be called from noncrash
case, fix it by adding missed PF_EXITING check condition
f2fs_file_flush().
Fixes: 0e0c433c381f ("f2fs: don't give partially written atomic data from process crash") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
svs_init01() calls pm_runtime_get_sync() and added fail path as
svs_init01_finish to put usage_counter. However, pm_runtime_get_sync()
will increment usage_counter even it failed. Fix it by replacing it with
pm_runtime_resume_and_get() to keep usage counter balanced.
Fixes: 7ba1a4be26a6 ("soc: mediatek: SVS: introduce MTK SVS engine") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: Roger Lu <roger.lu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230111074528.29354-5-roger.lu@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If svs init02 fail, it means we cannot rely on svs bank voltages anymore.
We need to disable svs function and restore DVFS opp voltages back to the
default voltages for making sure we have enough DVFS voltages.
Otherwise, last .atomic_write_task will be remained in structure
f2fs_inode_info, resulting in aborting atomic_write accidentally
in race case. Meanwhile, clear original_i_size as well.
Fixes: 0e0c433c381f ("f2fs: don't give partially written atomic data from process crash") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 4e9d6358004f ("f2fs: change the current atomic write way")
removed old tracepoints, but it missed to add new one, this patch
fixes to introduce trace_f2fs_replace_atomic_write_block to trace
atomic_write commit flow.
Fixes: 4e9d6358004f ("f2fs: change the current atomic write way") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the
register isn't correctly updated.
So ensure both status bits are set before clearing them.
Commit 5b293b88191e5e921f3a4e58711350e80892d01a added support for the
RGB and green PWM controlled LEDs on the HiFive Unmatched board
managed by the leds-pwm-multicolor and leds-pwm drivers respectively.
All three colours of the RGB LED and the green LED run from different
lines of the same PWM, but with the same period so this works fine when
the LED drivers are loaded one after the other.
Unfortunately it does expose a race in the PWM driver when both LED
drivers are loaded at roughly the same time. Here is an example:
Now both calls to pwm_sifive_apply will see that ddata->approx_period,
initially 0, is different from the requested period and the clock needs
to be updated. But since ddata->user_count >= 2 both calls will fail
with -EBUSY, which will then cause both LED drivers to fail to probe.
Fix it by letting the first call to pwm_sifive_apply update the clock
even when ddata->user_count != 1.
Fixes: 1afcd3819818 ("pwm: sifive: Add a driver for SiFive SoC PWM") Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the system does not come from reset (like when is booted via
kexec()), the peripheral might triger an IRQ before the data structures
are initialised.
Fixes:
[ 0.227710] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000f08
[ 0.227913] Call trace:
[ 0.227918] svs_isr+0x8c/0x538
While the acquired resources are tied to the lifetime of the RPC-IF core
device (through the use of managed resource functions), the actual
resource acquisition is triggered from the HyperBus and SPI child
drivers. Due to this mismatch, unbinding and rebinding the child
drivers manually fails with -EBUSY:
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/unbind
# echo rpc-if-hyperflash > /sys/bus/platform/drivers/rpc-if-hyperflash/bind
rpc-if ee200000.spi: can't request region for resource [mem 0xee200000-0xee2001ff]
rpc-if-hyperflash: probe of rpc-if-hyperflash failed with error -16
The same is true for rpc-if-spi.
Fix this by moving all resource acquisition to the core driver's probe
routine.
The rpcif structure is used as a common data structure, shared by the
RPC-IF core driver and by the HyperBus and SPI child drivers.
This poses several problems:
- Most structure members describe private core driver state, which
should not be accessible by the child drivers,
- The structure's lifetime is controlled by the child drivers,
complicating use by the core driver.
Fix this by moving the private core driver state to its own structure,
managed by the RPC-IF core driver, and store it in the core driver's
private data field. This requires absorbing the child's platform
device, as that was stored in the driver's private data field before.
In the use case of configuring the access permissions of the ADSP core,
the mt8186 SoC ADSP power will be switched on in the bootloader because
the permission control registers are located in the ADSP subsys.
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Fixes: f16d9d372233 ("soc: mediatek: pm-domains: Add support for mt8186") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221012075434.30009-1-tinghan.shen@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a potential deadlock reported by syzbot as below:
F2FS-fs (loop2): invalid crc value
F2FS-fs (loop2): Found nat_bits in checkpoint
F2FS-fs (loop2): Mounted with checkpoint version = 48b305e4
======================================================
WARNING: possible circular locking dependency detected 6.1.0-rc8-syzkaller-33330-ga5541c0811a0 #0 Not tainted
------------------------------------------------------
syz-executor.2/32123 is trying to acquire lock: ffff0000c0e1a608 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x54/0xb4 mm/memory.c:5644
When testing with a mixed zoned / convention device combination, there
are regular but not 100% reproducible failures in xfstests generic/113
where the __is_valid_data_blkaddr assert hits due to finding a hole.
This seems to be because f2fs_map_blocks can set this flag on a hole
when it was found in the extent cache.
Rework f2fs_iomap_begin to just check the special block numbers directly.
This has the added benefits of the WARN_ON showing which invalid block
address we found, and being properly error out on delalloc blocks that
are confusingly called unwritten but not actually suitable for direct
I/O.
The kfree() should be called when memory fails to be allocated for
cb_data in xlnx_add_cb_for_notify_event(), otherwise there will be
a memory leak, so add kfree() to fix it.
Fixes: f6d7f9dd133e ("driver: soc: xilinx: Add support of multiple callbacks for same event in event management driver") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20221129010146.1026685-1-cuigaosheng1@huawei.com Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
hd44780_probe() allocates a memory chunk for hd with kzalloc() and
makes "lcd->drvdata->hd44780" point to it. When we call hd44780_remove(),
we should release all relevant memory and resource. But "lcd->drvdata
->hd44780" is not released, which will lead to a memory leak.
We should release the "lcd->drvdata->hd44780" in hd44780_remove() to fix
the memory leak bug.
Fixes: c7841577321a ("auxdisplay: Introduce hd44780_common.[ch]") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tcindex classifier has served us well for about a quarter of a century
but has not been getting much TLC due to lack of known users. Most recently
it has become easy prey to syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sock_alloc_file fails to allocate a file, it will call sock_release.
__sys_socket_file should then not call sock_release again, otherwise there
will be a double free.
This code is executed by make at parse time and assumes that MAKEFLAGS
does not contain command line variable definitions.
Currently if the user defines a=s on the command line, then at build only
time MAKEFLAGS contains " -- a=s".
However, starting with commit dc2d963989b96161472b2cd38cef5d1f4851ea34
MAKEFLAGS contains command line definitions at both parse time and
build time.
This '-s' detection code then confuses a command line variable
definition which contains letter 's' with option -s.
$ # old make
$ make net/wireless/ocb.o a=s
CALL scripts/checksyscalls.sh
DESCEND objtool
$ # this a new make which defines makeflags at parse time
$ ~/src/gmake/make/l64/make net/wireless/ocb.o a=s
$
We can see here that the letter 's' from 'a=s' was confused with -s.
This patch checks for presence of -s using a method recommended by the
make manual here
https://www.gnu.org/software/make/manual/make.html#Testing-Flags.
Link: https://lists.gnu.org/archive/html/bug-make/2022-11/msg00190.html Reported-by: Jan Palus <jpalus+gnu@fastmail.com> Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan reported the new algorithm as merged might be problematic if the
queue being awaken becomes empty between the waitqueue_active inside
sbq_wake_ptr check and the wake up. If that happens, wake_up_nr will
not wake up any waiter and we loose too many wake ups. In order to
guarantee progress, we need to wake up at least one waiter here, if
there are any. This now requires trying to wake up from every queue.
Instead of walking through all the queues with sbq_wake_ptr, this call
moves the wake up inside that function. In a previous version of the
patch, I found that updating wake_index several times when walking
through queues had a measurable overhead. This ensures we only update
it once, at the end.
Fixes: 2838834268c2 ("sbitmap: Use single per-bitmap counting to wake up queued tags") Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221115224553.23594-4-krisman@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / kernel.git / log