Jason Gunthorpe [Wed, 6 May 2020 07:46:56 +0000 (10:46 +0300)]
RDMA/cm: Pass the cm_id_private into cm_cleanup_timewait
Also rename it to cm_remove_remote(). This function now removes the
tracking of the remote ID/QPN in the redblack trees from a cm_id_private.
Replace a open-coded version with a call. The open coded version was
deleting only the remote_id, however at this call site the qpn can not
have been in the RB tree either, so the cm_remove_remote() will do the
same.
Jason Gunthorpe [Wed, 6 May 2020 07:46:55 +0000 (10:46 +0300)]
RDMA/cm: Pull duplicated code into cm_queue_work_unlock()
While unlocking a spinlock held by the caller is a disturbing pattern,
this extensively duplicated code is even worse. Pull all the duplicates
into a function and explain the purpose of the algorithm.
The on creation side call in cm_req_handler() which is different has been
micro-optimized on the basis that the work_count == -1 during creation,
remove that and just use the normal function.
Jason Gunthorpe [Wed, 6 May 2020 07:46:52 +0000 (10:46 +0300)]
RDMA/addr: Mark addr_resolve as might_sleep()
Under one path through ib_nl_fetch_ha() this calls nlmsg_new(GFP_KERNEL)
which is a sleeping call. This is a very rare path, so mark fetch_ha() and
the module external entry point that conditionally calls through to
fetch_ha() as might_sleep().
Lang Cheng [Tue, 5 May 2020 10:30:07 +0000 (18:30 +0800)]
RDMA/hns: Combine enable flags of qp
It's easier to understand and maintain enable flags of qp using a single
field in type of unsigned long than defining a field for every flags in
the structure hns_roce_qp, and we can add new flags for features more
conveniently in the future.
Leon Romanovsky [Mon, 4 May 2020 13:25:41 +0000 (16:25 +0300)]
RDMA/ucma: Return stable IB device index as identifier
The librdmacm uses node_guid as identifier to correlate between IB devices
and CMA devices. However FW resets cause to such "connection" to be lost
and require from the user to restart its application.
Extend UCMA to return IB device index, which is stable identifier.
Colin Ian King [Thu, 7 May 2020 15:16:10 +0000 (16:16 +0100)]
RDMA/mlx5: Remove duplicated assignment to variable rcqe_sz
The variable rcqe_sz is being unnecessarily assigned twice, fix this by
removing one of the duplicates.
Fixes: 8bde2c509e40 ("RDMA/mlx5: Update all DRIVER QP places to use QP subtype") Link: https://lore.kernel.org/r/20200507151610.52636-1-colin.king@canonical.com
Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Bloch [Wed, 6 May 2020 07:16:02 +0000 (10:16 +0300)]
RDMA/mlx5: Allow only raw Ethernet QPs when RoCE isn't enabled
When operating in switchdev mode or using devlink to disable RoCE
only raw Ethernet QPs are allowed to be created.
When in switchdev mode this can lead to passing an invalid port number
as part of the modify qp firmware cmd and will lead to a syndrome
reported back to the user, such as:
* mlx5_cmd_check:803:(pid 50148): RST2INIT_QP(0x502) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0x177405).
Internal UD QP might be used to test for write combining support (even if
externally we report RoCE as disabled) check for that specific flag and
allow is specifically.
Fixes: b5ca15ad7e61 ("IB/mlx5: Add proper representors support") Link: https://lore.kernel.org/r/20200506071602.7177-3-leon@kernel.org Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Max Gurtovoy [Wed, 6 May 2020 06:55:12 +0000 (09:55 +0300)]
RDMA/mlx5: Refactor mlx5_post_send() to improve readability
Add small helpers in order to avoid code duplication and improve code
readability. Decrease the amount of code in the gigantic post_send
function and divide it to readable methods that will help in code
maintenance in the future.
Weihang Li [Thu, 30 Apr 2020 10:31:29 +0000 (18:31 +0800)]
RDMA/hns: Fix comments with non-English symbols
There is a comments with some chinese semicolons that cause encoding
issues each time hns_roc_hw_v2.h was modified from a IDE. So fix this by
using correct symbols.
Xi Wang [Tue, 28 Apr 2020 11:03:43 +0000 (19:03 +0800)]
RDMA/hns: Optimize SRQ buffer size calculating process
Optimize the SRQ's WQE buffer parameters calculating process to make the
codes more readable by using new functions about multi-hop addressing to
calculating capabilities of SRQ.
Xi Wang [Tue, 28 Apr 2020 11:03:41 +0000 (19:03 +0800)]
RDMA/hns: Optimize WQE buffer size calculating process
Optimize the QP's WQE buffer parameters calculating process to make the
codes more readable mainly by merging calculation of extended sge space of
kernel and userspace. In addition, add some inline functions to simply
codes about multi-hop addressing.
Xi Wang [Tue, 28 Apr 2020 11:03:40 +0000 (19:03 +0800)]
RDMA/hns: Remove unused MTT functions
The MTT (Memory Translate Table) interface is no longer used to configure
the buffer address to BT (Base Address Table) that requires driver
mapping. Because the MTT is not compatible with multi-hop addressing of
the hip08, it is replaced by MTR (Memory Translate Region) interface, and
all the MTT functions should be removed.
Xi Wang [Tue, 28 Apr 2020 11:03:39 +0000 (19:03 +0800)]
RDMA/hns: Optimize PBL buffer allocation process
PBL table has its own implementation for multi-hop addressing currently,
but for the hardware, all table's addressing use the same logic, there is
no need to implement repeatedly. So optimize the PBL buffer allocation
process by using the mtr's interfaces.
Link: https://lore.kernel.org/r/1588071823-40200-2-git-send-email-liweihang@huawei.com Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Lang Cheng <chenglang@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:35 +0000 (08:19 +0300)]
RDMA/mlx5: Set UDP source port based on the grh.flow_label
Calculate UDP source port based on the grh.flow_label. If grh.flow_label
is not valid, we will use minimal supported UDP source port.
Link: https://lore.kernel.org/r/20200504051935.269708-6-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:34 +0000 (08:19 +0300)]
RDMA/cma: Initialize the flow label of CM's route path record
If flow label is not set by the user or it's not IPv4, initialize it with
the cma src/dst based on the "Kernighan and Ritchie's hash function".
Link: https://lore.kernel.org/r/20200504051935.269708-5-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:33 +0000 (08:19 +0300)]
RDMA/mlx5: Define RoCEv2 udp source port when set path
Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.
Link: https://lore.kernel.org/r/20200504051935.269708-4-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Mark Zhang [Mon, 4 May 2020 05:19:31 +0000 (08:19 +0300)]
RDMA/core: Add hash functions to calculate RoCEv2 flowlabel and UDP source port
Add two hash functions to distribute RoCE v2 UDP source and Flowlabel
symmetrically. These are user visible API and any change in the
implementation needs to be tested for inter-operability between old and
new variant.
Link: https://lore.kernel.org/r/20200504051935.269708-2-leon@kernel.org Signed-off-by: Mark Zhang <markz@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 21 Apr 2020 17:24:40 +0000 (20:24 +0300)]
RDMA: Allow ib_client's to fail when add() is called
When a client is added it isn't allowed to fail, but all the client's have
various failure paths within their add routines.
This creates the very fringe condition where the client was added, failed
during add and didn't set the client_data. The core code will then still
call other client_data centric ops like remove(), rename(), get_nl_info(),
and get_net_dev_by_params() with NULL client_data - which is confusing and
unexpected.
If the add() callback fails, then do not call any more client ops for the
device, even remove.
Remove all the now redundant checks for NULL client_data in ops callbacks.
Update all the add() callbacks to return error codes
appropriately. EOPNOTSUPP is used for cases where the ULP does not support
the ib_device - eg because it only works with IB.
Maor Gottlieb [Thu, 30 Apr 2020 19:21:46 +0000 (22:21 +0300)]
RDMA/mlx5: Set lag tx affinity according to slave
The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.
For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result. For connected QPs, the driver
sets the affinity of the xmit slave.
The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.
Maor Gottlieb [Thu, 30 Apr 2020 19:21:43 +0000 (22:21 +0300)]
RDMA/core: Add LAG functionality
Add support to get the RoCE LAG xmit slave by building skb of the RoCE
packet and call to master_get_xmit_slave. If driver wants to get the
slave assume all slaves are available, then need to set
RDMA_LAG_FLAGS_HASH_ALL_SLAVES in flags.
Jason Gunthorpe [Sat, 2 May 2020 23:18:45 +0000 (20:18 -0300)]
Merge branch 'mellanox/mlx5-next' into rdma.git for-next
From the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Required for dependencies in following patches
* mellanox/mlx5-next:
net/mlx5: Add support to get lag physical port
net/mlx5: Change lag mutex lock to spin lock
bonding: Implement ndo_get_xmit_slave
bonding: Add array of all slaves
bonding: Add function to get the xmit slave in active-backup mode
bonding: Add helper function to get the xmit slave in rr mode
bonding: Add helper function to get the xmit slave based on hash
bonding/alb: Add helper functions to get the xmit slave
bonding: Rename slave_arr to usable_slaves
bonding: Export skip slave logic to function
net/core: Introduce netdev_get_xmit_slave
Maor Gottlieb [Thu, 30 Apr 2020 19:21:41 +0000 (22:21 +0300)]
net/mlx5: Add support to get lag physical port
Add function to get the device physical port of the lag slave.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:40 +0000 (22:21 +0300)]
net/mlx5: Change lag mutex lock to spin lock
The lag lock could be a spin lock, the critical section is short
and there is no need that the thread will sleep.
Change the lock that protects the LAG structure from mutex
to spin lock. It is required for next patch that need to
access this structure from context that we can't sleep.
In addition there is no need to hold this lock when query the
congestion counters.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:39 +0000 (22:21 +0300)]
bonding: Implement ndo_get_xmit_slave
Add implementation of ndo_get_xmit_slave. Find the slave by using the
helper function according to the bond mode. If the caller set all_slaves
to true, then it assumes that all slaves are available to transmit.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:38 +0000 (22:21 +0300)]
bonding: Add array of all slaves
Keep all slaves in array so it could be used to get the xmit slave
assume all the slaves are active.
The logic to add slave to the array is like the usable slaves, except
that we also add slaves that currently can't transmit - not up or active.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:37 +0000 (22:21 +0300)]
bonding: Add function to get the xmit slave in active-backup mode
Add helper function to get the xmit slave in active-backup mode.
It's only one line function that return the curr_active_slave,
but it will used both in the xmit flow and by the new .ndo to get
the xmit slave.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:36 +0000 (22:21 +0300)]
bonding: Add helper function to get the xmit slave in rr mode
Add helper function to get the xmit slave when bond is in round
robin mode. Change bond_xmit_slave_id to bond_get_slave_by_id, then
the logic for find the next slave for transmit could be used
both by the xmit flow and the .ndo to get the xmit slave.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:35 +0000 (22:21 +0300)]
bonding: Add helper function to get the xmit slave based on hash
Both xor and 802.3ad modes use bond_xmit_hash to get the xmit slave.
Export the logic to helper function so it could be used in the
following patches by the .ndo to get the xmit slave.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:34 +0000 (22:21 +0300)]
bonding/alb: Add helper functions to get the xmit slave
Add two helper functions to get the xmit slave of bond in alb or tlb
mode. Extract the logic of find the xmit slave from the xmit flow
to function. Xmit flow will xmit through this slave and in the
following patches the new .ndo will call to the helper function
to return the xmit slave.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:33 +0000 (22:21 +0300)]
bonding: Rename slave_arr to usable_slaves
Rename slave_arr to usable_slaves, since we will have two arrays,
one for the usable slaves and the other to all slaves.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:32 +0000 (22:21 +0300)]
bonding: Export skip slave logic to function
As a preparation for following change that add array of
all slaves, extract code that skip slave to function.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Maor Gottlieb [Thu, 30 Apr 2020 19:21:31 +0000 (22:21 +0300)]
net/core: Introduce netdev_get_xmit_slave
Add new ndo to get the xmit slave of master device. The reference
counters are not incremented so the caller must be careful with locks.
User can ask to get the xmit slave assume all the slaves can
transmit by set all_slaves arg to true.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Leon Romanovsky [Mon, 27 Apr 2020 15:46:32 +0000 (18:46 +0300)]
RDMA/mlx5: Handle udate outlen checks in one place
Place in one function all udata size checks. This will allow
us move ib_copy_to_udata() in general place and ensure that
it will be performed after call to the FW.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:30 +0000 (18:46 +0300)]
RDMA/mlx5: Group all create QP parameters to simplify in-kernel interfaces
The amount of parameters passed in and out between internal mlx5
create QP functions is too large to easily follow the flow. Change
it by grouping all create QP parameter into one structure.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:28 +0000 (18:46 +0300)]
RDMA/mlx5: Separate to user/kernel create QP flows
The kernel and user create QP flows have very little common code,
separate them to simplify the future work of creating per-type
create_*_qp() functions.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:27 +0000 (18:46 +0300)]
RDMA/mlx5: Separate XRC_TGT QP creation from common flow
XRC_TGT QP doesn't fail into kernel or user flow separation. It is
initiated by the user, but is created through in-kernel verbs flow
and doesn't have PD and udata in similar way to kernel QPs.
So let's separate creation of that QP type from the common flow.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:24 +0000 (18:46 +0300)]
RDMA/mlx5: Rely on existence of udata to separate kernel/user flows
Instead of keeping special field to separate kernel/user create/destroy
flows, rely on existence of udata pointer. All allocation flows are
using kzalloc() and leave uninitialized pointers as NULL which makes
MLX5_QP_EMPTY and MLX5_QP_KERNEL flows to be the same.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:20 +0000 (18:46 +0300)]
RDMA/mlx5: Store QP type in the vendor QP structure
QP type is stored in the IB/core QP struct, but it doesn't have all the
needed information, like internal QP type used in the driver itself.
Update mlx5_ib to have cached QP type which includes both IBTA and
Mellanox specific one.
Such change allows us to make even further cleanup of QP creation flow.
Jason Gunthorpe [Wed, 29 Apr 2020 00:44:51 +0000 (21:44 -0300)]
Merge branch 'mlx5_ib_qp_refactor_1' into rdma.git for-next
Leon Romanovsky says:
====================
This is first part of series which tries to return some sanity to
mlx5_ib_create_qp() function. Such refactoring is required to make
extension of that function with less worries of breaking driver.
Extra goal of such refactoring is to ensure that QP is allocated at the
beginning of function and released at the end. It will allow us to move QP
allocation to be under IB/core responsibility.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_ib_qp_refactor_1': (66 commits)
RDMA/mlx5: Process all vendor flags in one place
RDMA/mlx5: Return all configured create flags through query QP
RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags
RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature
RDMA/mlx5: Process create QP flags in one place
RDMA/mlx5: Delete create QP flags obfuscation
RDMA/mlx5: Initial separation of RAW_PACKET QP from common flow
RDMA/mlx5: Remove second copy from user for non RSS RAW QPs
RDMA/mlx5: Move DRIVER QP flags check into separate function
RDMA/mlx5: Update all DRIVER QP places to use QP subtype
RDMA/mlx5: Split scatter CQE configuration for DCT QP
RDMA/mlx5: Separate create QP flows to be based on type
RDMA/mlx5: Set QP subtype immediately when it is known
RDMA/mlx5: Avoid setting redundant NULL for XRC QPs
RDMA/mlx5: Prepare QP allocation for future removal
RDMA/mlx5: Perform check if QP creation flow is valid
RDMA/mlx5: Delete impossible GSI port check
RDMA/mlx5: Organize QP types checks in one place
Leon Romanovsky [Mon, 27 Apr 2020 15:46:16 +0000 (18:46 +0300)]
RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags
In similar way to wqe_sig, the scat_cqe was treated differently from
other create QP vendor flags. Change it to be similar to other flags
and use flags_en mechanism.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:15 +0000 (18:46 +0300)]
RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature
MLX5_QP_FLAG_SIGNATURE is exposed to the users but in the kernel
the create_qp flow treated it differently from other MLX5_QP_FLAG_*s.
Fix it by ditching wq_sig boolean variable and use general flag_en
mechanism.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:14 +0000 (18:46 +0300)]
RDMA/mlx5: Process create QP flags in one place
create_flags is checked in too many places and scattered across all
the code, consolidate all the checks inside one function, so we will
be easily see the flow. As part of such change, delete unreachable code,
because IB/core is responsible sanitize the input.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:13 +0000 (18:46 +0300)]
RDMA/mlx5: Delete create QP flags obfuscation
There is no point in redefinition of stable and exposed to users create
flags. Their values won't be changed and it is equal to used by the
mlx5. Delete the mlx5 definitions and use IB/core fields.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:09 +0000 (18:46 +0300)]
RDMA/mlx5: Update all DRIVER QP places to use QP subtype
Instead of overwriting QP init attributes with driver QP subtype,
use that subtype directly. This change will allow us to remove
logic which cached QP init attributes.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:06 +0000 (18:46 +0300)]
RDMA/mlx5: Set QP subtype immediately when it is known
There is no need to delay QP subtype assignment to the end of the
create_qp() function and it is better to move it to be immediately
after it is checked so we would be able to rewrite later checks
to be based on it and not on over-written struct ib_qp_init_attr.
Leon Romanovsky [Mon, 27 Apr 2020 15:46:01 +0000 (18:46 +0300)]
RDMA/mlx5: Organize QP types checks in one place
Perform check if QP type is supported in one place at the beginning of
the create_qp function instead of current implementation with checks
buried inside of the code.
Raed Salem [Fri, 24 Apr 2020 19:45:10 +0000 (12:45 -0700)]
net/mlx5: TX WQE Add trailer insertion field
Add new TX WQE field for Connect-X6DX trailer insertion support,
when set, the HW adds a trailer to the packet, the WQE trailer
association flags are used to set to HW the header which the
trailer belongs.
Signed-off-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5: Add structure layout and defines for MFRL register
Add needed structure layouts and defines for MFRL (Management Firmware
Reset Level) register. This structure will be used for the firmware
upgrade and reset flow in the downstream patches.
Raed Salem [Fri, 24 Apr 2020 19:45:05 +0000 (12:45 -0700)]
net/mlx5: Refactor imm_inval_pkey field in cqe struct
The imm_inval_pkey field can hold four different types of data,
depends on the usage, the data could be one of the below:
- Immediate field of the received message
- Invalidate rkey
- Pkey of the packet
- Flow table metadata
Current implementation doesn't reflect the intended usage of the
field at usage time.
Reflect the different types by replace this field with a union,
modify code where this field is used to reflect its intended
usage.
net/mlx5: Use aligned variable while allocating ICM memory
The alignment value is part of the input structure, so use it and spare
extra memory allocation when is not needed.
Now, using the new ability when allocating icm for Direct-Rule
insertion. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Lang Cheng [Wed, 15 Apr 2020 08:14:33 +0000 (16:14 +0800)]
RDMA/hns: Simplify the cqe code of poll cq
Encapsulate codes to get status of cqe into a function and use map table
instead of switch-case to reduce cyclomatic complexity of
hns_roce_v2_poll_one().