Takashi Iwai [Tue, 16 Aug 2022 13:07:55 +0000 (15:07 +0200)]
Merge tag 'asoc-fix-v6.0-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.0
A relatively large batch of fixes that came in since my pull request,
none of them too major and mostly device specific apart from a series of
security/robustness improvements from Takashi.
Mohan Kumar [Thu, 11 Aug 2022 05:27:04 +0000 (10:57 +0530)]
ALSA: hda: Fix crash due to jack poll in suspend
With jackpoll_in_suspend flag set, there is a possibility that
jack poll worker thread will run even after system suspend was
completed. Any register access after system pm callback flow
will result in kernel crash as still jack poll worker thread
tries to access registers.
To fix the crash issue during system flow, cancel the jack poll
worker thread during system pm prepare callback and cancel the
worker thread at start of runtime suspend callback and re-schedule
at last to avoid any unwarranted access of register by worker thread
during suspend flow.
Allen Ballway [Wed, 10 Aug 2022 15:27:22 +0000 (15:27 +0000)]
ALSA: hda/cirrus - support for iMac 12,1 model
The 12,1 model requires the same configuration as the 12,2 model
to enable headphones but has a different codec SSID. Adds
12,1 SSID for matching quirk.
Philipp Zabel [Wed, 10 Aug 2022 10:41:56 +0000 (12:41 +0200)]
ASoC: codec: tlv320aic32x4: fix mono playback via I2S
The two commits referenced below break mono playback via I2S DAI because
they set BCLK to half the required speed. For PCM transport over I2S, the
number of transmitted channels is always 2, even for mono playback.
Fixes: 82338e420897 ("ASoC: codec: tlv3204: Enable 24 bit audio support") Fixes: f7a7706c8410 ("ASoC: tlv320aic32x4: Fix bdiv clock rate derivation") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220810104156.665452-1-p.zabel@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
Mark Brown [Wed, 10 Aug 2022 12:41:56 +0000 (13:41 +0100)]
TAS2770 fixes
Merge series from Martin Povišer <povik+lin@cutebit.org>:
The first two fixes should be straightforward.
The latter two clean up what looks to me like a mess in the setting of
power levels. However we settle it, we should then do the same changes
to TAS2764, which has the same template (and maybe there are other
drivers).
Takashi Iwai [Tue, 9 Aug 2022 07:32:59 +0000 (09:32 +0200)]
ALSA: usb-audio: More comprehensive mixer map for ASUS ROG Zenith II
ASUS ROG Zenith II has two USB interfaces, one for the front headphone
and another for the rest I/O. Currently we provided the mixer mapping
for the latter but with an incomplete form.
This patch corrects and provides more comprehensive mixer mapping, as
well as providing the proper device names for both the front headphone
and main audio.
ALSA: scarlett2: Add Focusrite Clarett+ 8Pre support
The Focusrite Clarett+ 8Pre uses the same protocol as the Scarlett Gen
2 and Gen 3 product range. This patch adds support for the Clarett+
8Pre by adding appropriate entries to the scarlett2 driver.
The Clarett+ 2Pre and 4Pre, and the Clarett USB product line
presumably use the same protocol as well, so support for them can
easily be added if someone can test.
Martin Povišer [Mon, 8 Aug 2022 14:12:46 +0000 (16:12 +0200)]
ASoC: tas2770: Fix handling of mute/unmute
Because the PWR_CTRL field is modeled as the power state of the DAC
widget, and at the same time it is used to implement mute/unmute, we
need some additional book-keeping to have the right end result no matter
the sequence of calls. Without this fix, one can mute an ongoing stream
by toggling a speaker pin control.
Martin Povišer [Mon, 8 Aug 2022 14:12:45 +0000 (16:12 +0200)]
ASoC: tas2770: Drop conflicting set_bias_level power setting
The driver is setting the PWR_CTRL field in both the set_bias_level
callback and on DAPM events of the DAC widget (and also in the
mute_stream method). Drop the set_bias_level callback altogether as the
power setting it does is in conflict with the other code paths.
Meng Tang [Mon, 8 Aug 2022 07:34:06 +0000 (15:34 +0800)]
ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model
There is another LENOVO 20149 (Type1Sku0) Notebook model with
CX20590, the device PCI SSID is 17aa:3977, which headphones are
not responding, that requires the quirk CXT_PINCFG_LENOVO_NOTEBOOK.
Add the corresponding entry to the quirk table.
Changes to add HDMI capture support broke the machine driver probe for
all other platforms. The commit listed in the Fixes tag added a
board_id descriptor but didn't add the default name for the
sof_essx8336 machine driver.
Add the missing entry and remove the now-useless platform driver
alias.
Mark Brown [Fri, 5 Aug 2022 14:24:07 +0000 (15:24 +0100)]
ASoC: Fix theoretical buffer overflow by snprintf()
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a patch series to paper over the theoretical buffer overflow
that might be caused by snprintf(). snprintf() is notorious for its
behavior and the usage of a safer version, scnprintf(), is
recommended.
Takashi Iwai [Mon, 1 Aug 2022 17:05:10 +0000 (19:05 +0200)]
ASoC: DPCM: Don't pick up BE without substream
When DPCM tries to add valid BE connections at dpcm_add_paths(), it
doesn't check whether the picked BE actually supports for the given
stream direction. Due to that, when an asymmetric BE stream is
present, it picks up wrongly and this may result in a NULL dereference
at a later point where the code assumes the existence of a
corresponding BE substream.
This patch adds the check for the presence of the substream for the
target BE for avoiding the problem above.
Note that we have already some fix for non-existing BE substream at
commit 2611441e8ed5 ("ASoC: dpcm: skip missing substream while
applying symmetry"). But the code path we've hit recently is rather
happening before the previous fix. So this patch tries to fix at
picking up a BE instead of parsing BE lists.
Colin Ian King [Fri, 5 Aug 2022 12:04:39 +0000 (13:04 +0100)]
ALSA: ice1712: remove redundant assignment to new
The variable new is initialized with a value but it is never read. It is
being re-assigned a new value in every case path in the following switch
statement. The assignment is redundant and can be removed.
Cleans up clang scan build warning:
sound/pci/ice1712/quartet.c:569:8: warning: Although the value stored
to 'new' is used in the enclosing expression, the value is never actually
read from 'new' [deadcode.DeadStores]
When building with Clang we encounter these warnings:
| sound/soc/sof/ipc3-topology.c:2343:4: error: format specifies type
| 'unsigned char' but the argument has type 'int' [-Werror,-Wformat]
| SOF_ABI_MAJOR, SOF_ABI_MINOR, SOF_ABI_PATCH);
| ^~~~~~~~~~~~~~~^~~~~~~~~~~~~~~^~~~~~~~~~~~~
Use correct format specifier `%d` since args are of type int.
Biju Das [Thu, 28 Jul 2022 09:26:12 +0000 (10:26 +0100)]
ASoC: sh: rz-ssi: Improve error handling in rz_ssi_probe() error path
We usually do cleanup in reverse order of init. Currently in case of
error rz_ssi_release_dma_channels() done in the reverse order. This
patch improves error handling in rz_ssi_probe() error path.
While at it, use "goto cleanup" style to reduce code duplication.
Takashi Iwai [Mon, 1 Aug 2022 16:54:20 +0000 (18:54 +0200)]
ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()
snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).
This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.
Fixes: e8b680a6bfe0 ("ASoC: SOF: Intel: hda: add extended rom status dump to error log") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220801165420.25978-4-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
Takashi Iwai [Mon, 1 Aug 2022 16:54:19 +0000 (18:54 +0200)]
ASoC: SOF: debug: Fix potential buffer overflow by snprintf()
snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in the buffer
overflow (although it's unrealistic).
This patch replaces with a safer version, scnprintf() for papering
over such a potential issue.
Takashi Iwai [Mon, 1 Aug 2022 16:54:18 +0000 (18:54 +0200)]
ASoC: Intel: avs: Fix potential buffer overflow by snprintf()
snprintf() returns the would-be-filled size when the string overflows
the given buffer size, hence using this value may result in a buffer
overflow (although it's unrealistic).
This patch replaces it with a safer version, scnprintf() for papering
over such a potential issue.
Meng Tang [Fri, 5 Aug 2022 07:45:34 +0000 (15:45 +0800)]
ALSA: hda/realtek: Add quirk for another Asus K42JZ model
There is another Asus K42JZ model with the PCI SSID 1043:1313
that requires the quirk ALC269VB_FIXUP_ASUS_MIC_NO_PRESENCE.
Add the corresponding entry to the quirk table.
Takashi Iwai [Mon, 1 Aug 2022 16:56:39 +0000 (18:56 +0200)]
ALSA: line6: Replace sprintf() with sysfs_emit()
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces those usages
straightforwardly with a new helper, sysfs_emit().
Takashi Iwai [Mon, 1 Aug 2022 16:56:38 +0000 (18:56 +0200)]
ALSA: hda: Replace sprintf() with sysfs_emit()
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces those usages
straightforwardly with new helpers, sysfs_emit() and sysfs_emit_at().
Takashi Iwai [Mon, 1 Aug 2022 16:56:37 +0000 (18:56 +0200)]
ALSA: pcm: Replace sprintf() with sysfs_emit()
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces such a
sprintf() call straightforwardly with the new helper.
Takashi Iwai [Mon, 1 Aug 2022 16:56:35 +0000 (18:56 +0200)]
ALSA: control-led: Replace sprintf() with sysfs_emit()
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces such sprintf()
calls with sysfs_emit() while simplifying the open code in
list_show().
Takashi Iwai [Mon, 1 Aug 2022 16:56:34 +0000 (18:56 +0200)]
ALSA: aoa: Replace sprintf() with sysfs_emit()
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces such sprintf()
calls with sysfs_emit() while simplifying the open code in
modalias_show(); as modalias[] is a NUL-terminated string, we can pass
it straightly to a printf() argument.
Takashi Iwai [Mon, 1 Aug 2022 16:56:33 +0000 (18:56 +0200)]
ALSA: ac97: Replace sprintf() with sysfs_emit()
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces the open code
straightforwardly with a new helper.
Philipp Jungkamp [Fri, 29 Jul 2022 16:21:03 +0000 (18:21 +0200)]
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
The Lenovo Yoga 9 14IAP7 is set up similarly to the Thinkpad X1 7th and
8th Gen. It also has the speakers attached to NID 0x14 and the bass
speakers to NID 0x17, but here the codec misreports the NID 0x17 as
unconnected.
The pincfg and hda verbs connect and activate the bass speaker
amplifiers, but the generic driver will connect them to NID 0x06 which
has no volume control. Set connection list/preferred connections is
required to gain volume control.
For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from the control API. Note
that it's merely a workaround.
Another note: although we haven't received reports about the deadlock
with the control API, the deadlock is still potentially possible, and
it's better to align the behavior with other core APIs (PCM and
timer); so let's move altogether.
For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from timer API. Note that
it's merely a workaround.
For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from PCI API. Note that
it's merely a workaround.
Currently the call of kill_fasync() from an interrupt handler might
lead to potential spin deadlocks, as spotted by syzkaller.
Unfortunately, it's not so trivial to fix this lock chain as it's
involved with the tasklist_lock that is touched in allover places.
As a temporary workaround, this patch provides the way to defer the
async signal notification in a work. The new helper functions,
snd_fasync_helper() and snd_kill_faync() are replacements for
fasync_helper() and kill_fasync(), respectively. In addition,
snd_fasync_free() needs to be called at the destructor of the relevant
file object.
Mark Brown [Thu, 28 Jul 2022 00:21:40 +0000 (01:21 +0100)]
ASoC: atmel: one fix and one cleanup
Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:
Hi,
The series adds one fix for mchp-spdifrx and one cleanups for
mchp-spdifrx and mchp-spdifrx drivers.
Thank you,
Claudiu Beznea
Changes in v3:
- changed cover letter title s/few/one, s/cleanups/cleanup
- fix compilation error and warnings
- keep only patch 1/5 and patch 3/5 from previous version as the rest
of them were integrated
Changes in v2:
- s/tag/tab in the title of patch 2/5
Claudiu Beznea (2):
ASoC: mchp-spdifrx: disable end of block interrupt on failures
ASoC: mchp-spdiftx: remove references to mchp_i2s_caps
Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.
Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.
While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.
VA Macro fsgen clock is supplied to other LPASS Macros using proper
clock apis, however the internal user uses the registers directly without
clk apis. This approch has race condition where in external users of
the clock might cut the clock while VA macro is actively using this.
Moving the internal usage to clk apis would provide a proper refcounting
and avoid such race conditions.
This issue was noticed while headset was pulled out while recording is
in progress and shifting record patch to DMIC.
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Link: https://lore.kernel.org/r/20220727124749.4604-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
The afe_priv->dai_priv[] is allocated when platform driver probe(), if it
failed, the ASoC platform driver probe() will return fail first.
Therefore, this is excessive judgment, and the condition will never be
established.
ASoC: mchp-spdifrx: disable end of block interrupt on failures
Disable end of block interrupt in case of wait for completion timeout
or errors to undo previously enable operation (done in
mchp_spdifrx_isr_blockend_en()). Otherwise we can end up with an
unbalanced reference counter for this interrupt.
ASoC: mediatek: mt8186: set the correct string to strncmp()
Fix Smatch static checker warning. strncmp() here only needs to compare
the first seven bytes, so in order to make the code more clear, only the
first seven bytes of the string used as the comparison are reserved.
ASoC: amd: acp: Fix initialization of ext_intr_stat1 in i2s_irq_handler()
Clang warns:
../sound/soc/amd/acp/acp-platform.c:117:19: error: variable 'ext_intr_stat1' is uninitialized when used here [-Werror,-Wuninitialized]
if (stream && (ext_intr_stat1 & stream->irq_bit)) {
^~~~~~~~~~~~~~
../sound/soc/amd/acp/acp-platform.c:97:35: note: initialize the variable 'ext_intr_stat1' to silence this warning
u32 ext_intr_stat, ext_intr_stat1, i;
^
= 0
1 error generated.
The variable was not properly renamed, correct it to resolve the
warning.
ASoC: Intel: sof_nau8825: Move quirk check to the front in late probe
The sof_rt5682_quirk check was placed in the middle of
hdmi handling code, move it to the front to be consistent
with sof_rt5682.c/sof_card_late_probe().
For some reason we open-coded the SSP selection and only supported
SSP0, 1 and 2. On ApolloLake platforms, the SSP5 can be used as well
for the ES8336 hardware link.
Remove hard-coded if/else code and align with same code already used
in the SOF driver.
Andrey Turkin [Mon, 25 Jul 2022 19:49:03 +0000 (14:49 -0500)]
ASoC: Intel: sof_es8336: ignore GpioInt when looking for speaker/headset GPIO lines
This fixes speaker GPIO detection on machines those ACPI tables
list their jack detection GpioInt before output GpioIo.
GpioInt entry can never be the speaker/headphone amplifier control
so it makes sense to only look for GpioIo entries when looking for them.
Andrey Turkin [Mon, 25 Jul 2022 19:49:02 +0000 (14:49 -0500)]
ASoC: Intel: sof_es8336: Fix GPIO quirks set via module option
The two GPIO quirk bits only affected actual GPIO selection
when set by the quirks table. They were reported as being
in effect when set via module options but actually did nothing.
ASoC: Intel: sof_sdw: add support for Dell SKU 0AF0
Somehow this device was not added in the initial AlderLake batch.
From the ACPI definition this looks like a standard SDCA version with
RT711 on link0, RT1316 on link1/2 and RT714 on link3.
If CONFIG_SND_SOC_MT8186=y and CONFIG_SND_SOC_MT6358 is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
sound/soc/mediatek/mt8186/mt8186-mt6366-common.o: In function `mt8186_mt6366_init':
mt8186-mt6366-common.c:(.text+0x4d): undefined reference to `mt6358_set_mtkaif_protocol'
make: *** [vmlinux] Error 1
To fix this build error, add select SND_SOC_MT6358 to config SND_SOC_MT8186 dependency.
If CONFIG_PM_SLEEP is not set,
make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu-, will be failed, like this:
sound/pci/hda/cs35l41_hda.c:583:12: error: ‘cs35l41_runtime_resume’ defined but not used [-Werror=unused-function]
static int cs35l41_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~
sound/pci/hda/cs35l41_hda.c:565:12: error: ‘cs35l41_runtime_suspend’ defined but not used [-Werror=unused-function]
static int cs35l41_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[3]: *** [sound/pci/hda/cs35l41_hda.o] Error 1
commit 2238160b4f05 ("PM: core: Add new *_PM_OPS macros,
deprecate old ones"), add new marco RUNTIME_PM_OPS to fix this unused-function problem.
ASoC: Intel: avs: Use lookup table to create modules
As reported by Nathan, when building avs driver using clang with:
CONFIG_COMPILE_TEST=y
CONFIG_FORTIFY_SOURCE=y
CONFIG_KASAN=y
CONFIG_PCI=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_INTEL_AVS=y
there are reports of too big stack use, like:
sound/soc/intel/avs/path.c:815:18: error: stack frame size (2176) exceeds limit (2048) in 'avs_path_create' [-Werror,-Wframe-larger-than]
struct avs_path *avs_path_create(struct avs_dev *adev, u32 dma_id,
^
1 error generated.
This is apparently caused by inlining many calls to guid_equal which
inlines fortified memcpy, using 2 size_t variables.
Instead of hardcoding many calls to guid_equal, use lookup table with
one call, this improves stack usage.
ASoC: amd: vangogh: Use non-legacy DAI naming for cs35l41
Unlike most CODEC drivers, the CS35L41 driver did not have the
non_legacy_dai_naming set, meaning the corresponding DAI has been
traditionally registered using the legacy naming: spi-VLV1776:0x
The recent migration to the new legacy DAI naming style has implicitly
corrected that behavior and DAI gets now registered via the non-legacy
naming, i.e. cs35l41-pcm.
The problem is the acp5x platform driver is now broken as it continues
to refer to the above mentioned codec using the legacy DAI naming in
function acp5x_cs35l41_hw_params() and, therefore, the related setup
is not being executed anymore.
Let's fix that by replacing the obsolete DAI name with the correct one.
Fixes: 28a1cb9cb880 ("ASoC: core: Switch core to new DAI naming flag") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220722092700.8269-1-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax [Fri, 22 Jul 2022 09:48:51 +0000 (10:48 +0100)]
firmware: cs_dsp: Add memory chunk helpers
Add helpers that can be layered on top of a buffer read from or to be
written to the DSP to faciliate accessing datastructures within the DSP
memory. These functions handle adding the padding bytes for the DSP,
converting to big endian, and packing arbitrary length data.
Charles Keepax [Fri, 22 Jul 2022 09:48:50 +0000 (10:48 +0100)]
firmware: cs_dsp: Add pre_stop callback
The code already has a post_stop callback, add a matching pre_stop
callback to the client_ops that is called before execution is stopped.
This callback provides a convenient place for the client code to
communicate with the DSP before it is stopped.
projects / kernel.git / log