Input: edt-ft5x06 - fix access to non-existing register
reg_addr->reg_report_rate is supposed to exist in M06, not M09.
The driver is written to skip avoids access to non-existing registers
when the register address is NO_REGISTER (0xff). But
reg_addr->reg_report_rate is initialized to 0x00 by devm_kzalloc() (in
edt_ft5x06_ts_probe()) and not changed thereafter. So the checks do
not work and an access to register 0x00 is done.
Fix by setting reg_addr->reg_report_rate to NO_REGISTER.
Also fix the only place where reg_report_rate is checked against zero
instead of NO_REGISTER.
Input: goodix - add support for capacitive home button
On some x86 tablets with a Goodix touchscreen, the Windows logo on the
front is a capacitive home button. Touching this button results in a touch
with bit 4 of the first byte set, while only the lower 4 bits (0-3) are
used to indicate the number of touches.
Report a KEY_LEFTMETA press when this happens.
Note that the hardware might support more than one button, in which
case the "id" byte of coor_data would identify the button in question.
This is not implemented as we don't have access to hardware with
multiple buttons.
Signed-off-by: Sergei A. Trusov <sergei.a.trusov@ya.ru> Acked-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Danilo Krummrich [Mon, 28 Aug 2017 16:59:20 +0000 (09:59 -0700)]
Input: PS/2 gpio bit banging driver for serio bus
This driver provides PS/2 serio bus support by implementing bit banging
with the GPIO API. The GPIO pins, data and clock, can be configured with
a node in the device tree or by generic device properties (GDP).
Writing to a device is supported as well, though it is possible timings
can not be halt as they are tough and difficult to reach with bit banging.
Therefore it can be configured (also in DT and GDP) whether the serio
write function should be available for clients.
This driver is for development purposes and not recommended for productive
use. However, this driver can be useful e.g. when no USB port is available
or using old peripherals is desired as PS/2 controller chips getting rare.
This driver was tested on bcm2825 and on Kirin 960 and it worked well
together with the atkbd and psmouse driver.
Liang Yan [Mon, 28 Aug 2017 16:41:08 +0000 (09:41 -0700)]
Input: xen-kbdfront - enable auto repeat for xen keyboard frontend driver
Long pressed key could not show right in XEN vncviewer after tigervnc
client changed the way how to send repeat keys, from "Down Up Down Up
..." to "Down Down ... Up". This will report autorepeat to input by
checking if same key being pressed, and let handler process it finally.
Signed-off-by: Liang Yan <lyan@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Arvind Yadav [Sat, 19 Aug 2017 00:12:40 +0000 (17:12 -0700)]
Input: wacom_w8001 - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:12:29 +0000 (17:12 -0700)]
Input: tsc40 - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:12:14 +0000 (17:12 -0700)]
Input: touchwin - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:12:03 +0000 (17:12 -0700)]
Input: touchright - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:11:56 +0000 (17:11 -0700)]
Input: touchit213 - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:11:48 +0000 (17:11 -0700)]
Input: penmount - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:11:40 +0000 (17:11 -0700)]
Input: mtouch - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:11:32 +0000 (17:11 -0700)]
Input: inexio - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:11:20 +0000 (17:11 -0700)]
Input: hampshire - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:11:12 +0000 (17:11 -0700)]
Input: gunze - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:11:04 +0000 (17:11 -0700)]
Input: fujitsu_ts - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:10:53 +0000 (17:10 -0700)]
Input: elo - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:10:41 +0000 (17:10 -0700)]
Input: dynapro - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:10:33 +0000 (17:10 -0700)]
Input: wacom_serial4 - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:10:24 +0000 (17:10 -0700)]
Input: constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:10:13 +0000 (17:10 -0700)]
Input: xtkbd - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:10:05 +0000 (17:10 -0700)]
Input: sunkbd - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:09:50 +0000 (17:09 -0700)]
Input: stowaway - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:09:41 +0000 (17:09 -0700)]
Input: newtonkbd - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:09:31 +0000 (17:09 -0700)]
Input: lkkbd - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:09:21 +0000 (17:09 -0700)]
Input: hil_kbd - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:09:14 +0000 (17:09 -0700)]
Input: iatkbd - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:09:05 +0000 (17:09 -0700)]
Input: zhenhua - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:08:52 +0000 (17:08 -0700)]
Input: warrior - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:08:41 +0000 (17:08 -0700)]
Input: twidjoy - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:08:29 +0000 (17:08 -0700)]
Input: stinger - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:08:17 +0000 (17:08 -0700)]
Input: spaceorb - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:08:02 +0000 (17:08 -0700)]
Input: spaceball - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:07:48 +0000 (17:07 -0700)]
Input: magellan - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
Arvind Yadav [Sat, 19 Aug 2017 00:07:32 +0000 (17:07 -0700)]
Input: iforce - constify serio_device_id
serio_device_id are not supposed to change at runtime. All functions
working with serio_device_id provided by <linux/serio.h> work with
const serio_device_id. So mark the non-const structs as const.
KT Liao [Fri, 18 Aug 2017 23:49:53 +0000 (16:49 -0700)]
Input: elan_i2c - support touchpads with two physical buttons
Elan touchpads on Asus ROG G752xx series laptops have 2 physical buttons.
Luckily we can query the touchpad to see if it is a clickpad variant and
adjust the behavior accordingly.
Arvind Yadav [Thu, 17 Aug 2017 00:43:10 +0000 (17:43 -0700)]
Input: i8042 - constify pnp_device_id
pnp_device_id are not supposed to change at runtime. All functions
working with pnp_device_id provided by <linux/pnp.h> work with
const pnp_device_id. So mark the non-const structs as const.
Quentin Schulz [Tue, 15 Aug 2017 05:16:27 +0000 (22:16 -0700)]
Input: axp20x-pek - use driver_data of platform_device_id instead of extended attributes
To prepare an upcoming patch adding support for another PMIC that has
different startup and shutdown time, use driver_data of
platform_device_id instead of a fixed extended device attribute.
By doing so, we also remove a lot of nested structures that aren't
useful.
With this patch, a new PMIC can be easily supported by just filling
correctly its ax20x_info structure and adding a platform_device_id.
Moreover, since we get rid of extended attributes, rename
axp20x_store_ext_attr to axp20x_store_attr and axp20x_show_ext_attr to
axp20x_show_attr.
Arvind Yadav [Tue, 15 Aug 2017 05:10:55 +0000 (22:10 -0700)]
Input: ati_remote2 - constify usb_device_id
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
The thermal_zone_of_device_ops structure is only passed as the fourth
argument to devm_thermal_zone_of_sensor_register, which is declared
as const. Thus the thermal_zone_of_device_ops structure itself can
be const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Munir Contractor [Tue, 15 Aug 2017 05:02:08 +0000 (22:02 -0700)]
Input: pcspkr - fix code style and error value in pcspkr_event
This patch fixes the following issues in pcspkr:
* Return -EINVAL when input arguments are not valid in pcspkr_event
function instead of -1.
* Replace <asm/io.h> with <linux/io.h>
* Fix indentation of case blocks in switch statement
* Reduce length of line 28 to less than 80 characters
The style issues were discovered by checkpatch.pl script.
Pan Bian [Mon, 14 Aug 2017 17:29:13 +0000 (10:29 -0700)]
Input: mxs-lradc - use correct error check
Function devm_ioremap() will return a NULL pointer on failure. However,
in function mxs_lradc_ts_probe(), its return value is checked with
IS_ERR(), which cannot detect the exceptional case.
Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Arvind Yadav [Tue, 8 Aug 2017 03:04:13 +0000 (20:04 -0700)]
Input: xpad - constify usb_device_id
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Arvind Yadav [Tue, 8 Aug 2017 02:45:14 +0000 (19:45 -0700)]
Input: kbtab - constify usb_device_id
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Arvind Yadav [Tue, 8 Aug 2017 02:44:49 +0000 (19:44 -0700)]
Input: acecad - constify usb_device_idi and fix space before '[' error
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Fix checkpatch.pl error:
ERROR: space prohibited before open square bracket '['.
Arvind Yadav [Tue, 8 Aug 2017 02:44:37 +0000 (19:44 -0700)]
Input: synaptics_usb - constify usb_device_id
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Arvind Yadav [Tue, 8 Aug 2017 02:44:25 +0000 (19:44 -0700)]
Input: appletouch - constify usb_device_id
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Arvind Yadav [Tue, 8 Aug 2017 02:44:10 +0000 (19:44 -0700)]
Input: powermate - constify usb_device_id and fix space before '[' error
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Fix checkpatch.pl error:
ERROR: space prohibited before open square bracket '['.
Arvind Yadav [Tue, 8 Aug 2017 02:43:52 +0000 (19:43 -0700)]
Input: keyspan_remote - constify usb_device_id
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Arvind Yadav [Tue, 8 Aug 2017 02:43:18 +0000 (19:43 -0700)]
Input: iforce - constify usb_device_id and fix space before '[' error
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Fix checkpatch.pl error:
ERROR: space prohibited before open square bracket '['.
Nick Desaulniers [Sun, 25 Jun 2017 05:50:12 +0000 (22:50 -0700)]
Input: mousedev - fix implicit conversion warning
Clang warns:
drivers/input/mousedev.c:653:63: error: implicit conversion from 'int'
to 'signed char' changes value from 200 to -56
[-Wconstant-conversion]
client->ps2[1] = 0x60; client->ps2[2] = 3; client->ps2[3] = 200;
~ ^~~
As the PS2 data is really a stream of bytes, let's switch to using u8 type
for it, which silences this warning.
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
driver core: add devm_device_add_group() and friends
Many drivers create additional driver-specific device attributes when
binding to the device, and providing managed version of
device_create_group() will simplify unbinding and error handling in probe
path for such drivers.
Without managed version driver writers either have to mix manual and
managed resources, which is prone to errors, or open-code this function by
providing a wrapper to device_add_group() and use it with devm_add_action()
or devm_add_action_or_reset().
We have helpers that work with NULL terminated array of groups, but many
drivers only create a single supplemental group, and do not want to declare
a group array. Let's provide them with helpers working with a single group.
driver core: make device_{add|remove}_groups() public
Many drivers create additional driver-specific device attributes when
binding to the device. To avoid them calling SYSFS API directly, let's
export these helpers.
driver core: emit uevents when device is bound to a driver
There are certain touch controllers that may come up in either normal
(application) or boot mode, depending on whether firmware/configuration is
corrupted when they are powered on. In boot mode the kernel does not create
input device instance (because it does not necessarily know the
characteristics of the input device in question).
Another number of controllers does not store firmware in a non-volatile
memory, and they similarly need to have firmware loaded before input device
instance is created. There are also other types of devices with similar
behavior.
There is a desire to be able to trigger firmware loading via udev, but it
has to happen only when driver is bound to a physical device (i2c or spi).
These udev actions can not use ADD events, as those happen too early, so we
are introducing BIND and UNBIND events that are emitted at the right
moment.
Also, many drivers create additional driver-specific device attributes
when binding to the device, to provide userspace with additional controls.
The new events allow userspace to adjust these driver-specific attributes
without worrying that they are not there yet.
Input: sur40 - skip all blobs that are not touches
The SUR40 labels all reported blobs as touch, token, or generic blob.
Previously, all blobs were reported as touch regardless of type, causing
lots of false positives. Present patch fixes this.
Input: sur40 - add additional reverse-engineered information
Due to recent reverse engineering efforts, a lot more information is now
available about the internals of the SUR40. We document this in the kernel
driver for future use.
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
9086 624 0 9710 25ee drivers/input/touchscreen/ads7846.o
File size After adding 'const':
text data bss dec hex filename
9198 496 0 9694 25de drivers/input/touchscreen/ads7846.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
9448 1008 0 10456 28d8 drivers/input/touchscreen/elants_i2c.o
File size After adding 'const':
text data bss dec hex filename
9496 944 0 10440 28c8 drivers/input/touchscreen/elants_i2c.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
7801 560 0 8361 20a9 drivers/input/touchscreen/raydium_i2c_ts.o
File size After adding 'const':
text data bss dec hex filename
7849 496 0 8345 2099 drivers/input/touchscreen/raydium_i2c_ts.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
12850 740 12 13602 3522 drivers/input/mouse/psmouse-base.o
File size After adding 'const':
text data bss dec hex filename
12914 676 12 13602 3522 drivers/input/mouse/psmouse-base.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
16815 1424 0 18239 473f drivers/input/mouse/elantech.o
File size After adding 'const':
text data bss dec hex filename
16879 1360 0 18239 473f drivers/input/mouse/elantech.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
5693 464 0 6157 180d drivers/input/keyboard/gpio_keys.o
File size After adding 'const':
text data bss dec hex filename
5749 400 0 6149 1805 drivers/input/keyboard/gpio_keys.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
6039 944 0 6983 1b47 drivers/input/misc/yealink.o
File size After adding 'const':
text data bss dec hex filename
6103 880 0 6983 1b47 drivers/input/misc/yealink.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
13547 1600 0 15147 3b2b drivers/input/misc/ims-pcu.o
File size After adding 'const':
text data bss dec hex filename
13675 1472 0 15147 3b2b drivers/input/misc/ims-pcu.o
Input: synaptics-rmi4 - constify attribute_group structures in F01
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4777 480 0 5257 1489 drivers/input/rmi4/rmi_f01.o
File size After adding 'const':
text data bss dec hex filename
4817 416 0 5233 1471 drivers/input/rmi4/rmi_f01.o
Input: synaptics-rmi4 - constify attribute_group structures in F34
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
5287 448 0 5735 1667 drivers/input/rmi4/rmi_f34.o
File size After adding 'const':
text data bss dec hex filename
5339 384 0 5723 165b drivers/input/rmi4/rmi_f34.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
17755 1312 16 19083 4a8b drivers/input/input.o
File size After adding 'const':
text data bss dec hex filename
17947 1120 16 19083 4a8b drivers/input/input.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
9941 1560 0 11501 2ced drivers/input/tablet/aiptek.o
File size After adding 'const':
text data bss dec hex filename
10005 1496 0 11501 2ced drivers/input/tablet/aiptek.o
attribute_groups are not supposed to change at runtime. All functions
working with attribute_groups provided by <linux/sysfs.h> work with const
attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
6862 1008 4 7874 1ec2 drivers/input/serio/serio.o
File size After adding 'const':
text data bss dec hex filename
6990 880 4 7874 1ec2 drivers/input/serio/serio.o
Chen Hong [Sun, 2 Jul 2017 22:11:10 +0000 (15:11 -0700)]
Input: i8042 - fix crash at boot time
The driver checks port->exists twice in i8042_interrupt(), first when
trying to assign temporary "serio" variable, and second time when deciding
whether it should call serio_interrupt(). The value of port->exists may
change between the 2 checks, and we may end up calling serio_interrupt()
with a NULL pointer:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
IP: [<ffffffff8150feaf>] _spin_lock_irqsave+0x1f/0x40
PGD 0
Oops: 0002 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:
To avoid the issue let's change the second check to test whether serio is
NULL or not.
Also, let's take i8042_lock in i8042_start() and i8042_stop() instead of
trying to be overly smart and using memory barriers.
Signed-off-by: Chen Hong <chenhong3@huawei.com>
[dtor: take lock in i8042_start()/i8042_stop()] Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Joseph Lo [Sun, 2 Jul 2017 20:38:31 +0000 (13:38 -0700)]
Input: gpio_keys - handle the missing key press event in resume phase
The GPIO key press event might be missed in the resume phase, if the key
had been released before the system had been resumed to the stage that it
could capture the press event. So we simulate the wakeup key press event
in case the key had been released by the time we got interrupt handler
to run.
Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov [Wed, 28 Jun 2017 23:37:25 +0000 (16:37 -0700)]
MAINTAINERS: update input subsystem patterns
Add include/uapi/linux/input-event-codes.h and Documentation/input to
the file patterns, so that patches touching these files get copied
to linux-input mailing list.
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Here's a final round of fixes for 4.12:
- Fix misordered instructions in assembly code making kenel startup
via UHB unreliable.
- Fix special case of MADDF and MADDF emulation.
- Fix alignment issue in address calculation in pm-cps on 64 bit.
- Fix IRQ tracing & lockdep when rescheduling
- Systems with MAARs require post-DMA cache flushes.
The reordering fix and the MADDF/MSUBF fix have sat in linux-next for
a number of days. The others haven't propagated from my pull tree to
linux-next yet but all have survived manual testing and Imagination's
automated test system and there are no pending bug reports"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Avoid accidental raw backtrace
MIPS: Perform post-DMA cache flushes on systems with MAARs
MIPS: Fix IRQ tracing & lockdep when rescheduling
MIPS: pm-cps: Drop manual cache-line alignment of ready_count
MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately
MIPS: head: Reorder instructions missing a delay slot
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Fixlets for x86:
- Prevent kexec crash when KASLR is enabled, which was caused by an
address calculation bug
- Restore the freeing of PUDs on memory hot remove
- Correct a negated pointer check in the intel uncore performance
monitoring driver
- Plug a memory leak in an error exit path in the RDT code"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel_rdt: Fix memory leak on mount failure
x86/boot/KASLR: Fix kexec crash due to 'virt_addr' calculation bug
x86/boot/KASLR: Add checking for the offset of kernel virtual address randomization
perf/x86/intel/uncore: Fix wrong box pointer check
x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD
projects / kernel.git / log