Yang Li [Thu, 6 Oct 2022 12:01:36 +0000 (20:01 +0800)]
net: enetc: Remove duplicated include in enetc_qos.c
net/pkt_sched.h is included twice in enetc_qos.c,
remove one of them.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2334 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Li [Thu, 6 Oct 2022 11:44:00 +0000 (19:44 +0800)]
octeontx2-pf: mcs: remove unneeded semicolon
Semicolon is not required after curly braces.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2332 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gaurav Kohli [Thu, 6 Oct 2022 05:52:59 +0000 (22:52 -0700)]
hv_netvsc: Fix race between VF offering and VF association message from host
During vm boot, there might be possibility that vf registration
call comes before the vf association from host to vm.
And this might break netvsc vf path, To prevent the same block
vf registration until vf bind message comes from host.
Cc: stable@vger.kernel.org Fixes: 86bec1e3179c5 ("hv_netvsc: pair VF based on serial number") Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Gaurav Kohli <gauravkohli@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Aring [Thu, 6 Oct 2022 02:02:37 +0000 (22:02 -0400)]
net: ieee802154: return -EINVAL for unknown addr type
This patch adds handling to return -EINVAL for an unknown addr type. The
current behaviour is to return 0 as successful but the size of an
unknown addr type is not defined and should return an error like -EINVAL.
Fixes: 3b8d22d8a4dc ("net/ieee802154: fix uninit value bug in dgram_sendmsg") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Wenjia Zhang [Fri, 7 Oct 2022 06:54:36 +0000 (08:54 +0200)]
MAINTAINERS: add Jan as SMC maintainer
Add Jan as maintainer for Shared Memory Communications (SMC)
Sockets.
Acked-by: Jan Karcher <jaka@linux.ibm.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: pse-pd: PSE_REGULATOR should depend on REGULATOR
The Regulator based PSE controller driver relies on regulator support to
be enabled. If regulator support is disabled, it will still compile
fine, but won't operate correctly.
Hence add a dependency on REGULATOR, to prevent asking the user about
this driver when configuring a kernel without regulator support.
Vladimir Oltean [Tue, 4 Oct 2022 22:01:00 +0000 (01:01 +0300)]
Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"
taprio_attach() has this logic at the end, which should have been
removed with the blamed patch (which is now being reverted):
/* access to the child qdiscs is not needed in offload mode */
if (FULL_OFFLOAD_IS_ENABLED(q->flags)) {
kfree(q->qdiscs);
q->qdiscs = NULL;
}
because otherwise, we make use of q->qdiscs[] even after this array was
deallocated, namely in taprio_leaf(). Therefore, whenever one would try
to attach a valid child qdisc to a fully offloaded taprio root, one
would immediately dereference a NULL pointer.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
pc : taprio_leaf+0x28/0x40
lr : qdisc_leaf+0x3c/0x60
Call trace:
taprio_leaf+0x28/0x40
tc_modify_qdisc+0xf0/0x72c
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
The solution is not as obvious as the problem. The code which deallocates
q->qdiscs[] is in fact copied and pasted from mqprio, which also
deallocates the array in mqprio_attach() and never uses it afterwards.
Therefore, the identical cleanup logic of priv->qdiscs[] that
mqprio_destroy() has is deceptive because it will never take place at
qdisc_destroy() time, but just at raw ops->destroy() time (otherwise
said, priv->qdiscs[] do not last for the entire lifetime of the mqprio
root), but rather, this is just the twisted way in which the Qdisc API
understands error path cleanup should be done (Qdisc_ops :: destroy() is
called even when Qdisc_ops :: init() never succeeded).
Side note, in fact this is also what the comment in mqprio_init() says:
/* pre-allocate qdisc, attachment can't fail */
Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as
data passing between Qdisc_ops :: init() and Qdisc_ops :: attach().
[ this comment was also copied and pasted into the initial taprio
commit, even though taprio_attach() came way later ]
The problem is that taprio also makes extensive use of the q->qdiscs[]
array in the software fast path (taprio_enqueue() and taprio_dequeue()),
but it does not keep a reference of its own on q->qdiscs[i] (you'd think
that since it creates these Qdiscs, it holds the reference, but nope,
this is not completely true).
To understand the difference between taprio_destroy() and mqprio_destroy()
one must look before commit 8f05635a203c ("net: taprio offload: enforce
qdisc to netdev queue mapping"), because that just muddied the waters.
In the "original" taprio design, taprio always attached itself (the root
Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go
through taprio_enqueue().
It also called qdisc_refcount_inc() on itself for as many times as there
were netdev TX queues, in order to counter-balance what tc_get_qdisc()
does when destroying a Qdisc (simplified for brevity below):
if (n->nlmsg_type == RTM_DELQDISC)
err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack);
qdisc_graft(where "new" is NULL so this deletes the Qdisc):
for (i = 0; i < num_q; i++) {
struct netdev_queue *dev_queue;
dev_queue = netdev_get_tx_queue(dev, i);
old = dev_graft_qdisc(dev_queue, new);
if (new && i > 0)
qdisc_refcount_inc(new);
qdisc_put(old);
~~~~~~~~~~~~~~
this decrements taprio's refcount once for each TX queue
}
notify_and_destroy(net, skb, n, classid,
rtnl_dereference(dev->qdisc), new);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and this finally decrements it to zero,
making qdisc_put() call qdisc_destroy()
The q->qdiscs[] created using qdisc_create_dflt() (or their
replacements, if taprio_graft() was ever to get called) were then
privately freed by taprio_destroy().
This is still what is happening after commit 8f05635a203c ("net: taprio
offload: enforce qdisc to netdev queue mapping"), but only for software
mode.
In full offload mode, the per-txq "qdisc_put(old)" calls from
qdisc_graft() now deallocate the child Qdiscs rather than decrement
taprio's refcount. So when notify_and_destroy(taprio) finally calls
taprio_destroy(), the difference is that the child Qdiscs were already
deallocated.
And this is exactly why the taprio_attach() comment "access to the child
qdiscs is not needed in offload mode" is deceptive too. Not only the
q->qdiscs[] array is not needed, but it is also necessary to get rid of
it as soon as possible, because otherwise, we will also call qdisc_put()
on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this
will cause a nasty use-after-free/refcount-saturate/whatever.
In short, the problem is that since the blamed commit, taprio_leaf()
needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy()
-> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach()
for full offload. Fixing one problem triggers the other.
All of this can be solved by making taprio keep its q->qdiscs[i] with a
refcount elevated at 2 (in offloaded mode where they are attached to the
netdev TX queues), both in taprio_attach() and in taprio_graft(). The
generic qdisc_graft() would just decrement the child qdiscs' refcounts
to 1, and taprio_destroy() would give them the final coup de grace.
However the rabbit hole of changes is getting quite deep, and the
complexity increases. The blamed commit was supposed to be a bug fix in
the first place, and the bug it addressed is not so significant so as to
justify further rework in stable trees. So I'd rather just revert it.
I don't know enough about multi-queue Qdisc design to make a proper
judgement right now regarding what is/isn't idiomatic use of Qdisc
concepts in taprio. I will try to study the problem more and come with a
different solution in net-next.
Fixes: 8e2333f89969 ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs") Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1],
for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting
__dev_queue_xmit() with skb->len == 0.
Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was
able to return 0, don't call __dev_queue_xmit() if packet length is 0.
Note that this might be a sign that commit fe1f468a3ebcab50 ("bpf: Don't
redirect packets with invalid pkt_len") should be reverted, for
skb->len == 0 was acceptable for at least PF_IEEE802154 socket.
Linus Torvalds [Tue, 4 Oct 2022 20:38:03 +0000 (13:38 -0700)]
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
Linus Torvalds [Tue, 4 Oct 2022 18:13:38 +0000 (11:13 -0700)]
Merge tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"Improve user help for Landlock (documentation and sample)"
* tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix documentation style
landlock: Slightly improve documentation and fix spelling
samples/landlock: Print hints about ABI versions
Linus Torvalds [Tue, 4 Oct 2022 18:05:43 +0000 (11:05 -0700)]
Merge tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Six audit patches for v6.1, most are pretty trivial, but a quick list
of the highlights are below:
- Only free the audit proctitle information on task exit. This allows
us to cache the information and improve performance slightly.
- Use the time_after() macro to do time comparisons instead of doing
it directly and potentially causing ourselves problems when the
timer wraps.
- Convert an audit_context state comparison from a relative enum
comparison, e.g. (x < y), to a not-equal comparison to ensure that
we are not caught out at some unknown point in the future by an
enum shuffle.
- A handful of small cleanups such as tidying up comments and
removing unused declarations"
* tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove selinux_audit_rule_update() declaration
audit: use time_after to compare time
audit: free audit_proctitle only on task exit
audit: explicitly check audit_context->context enum value
audit: audit_context pid unused, context enum comment fix
audit: fix repeated words in comments
Linus Torvalds [Tue, 4 Oct 2022 17:24:11 +0000 (10:24 -0700)]
Merge tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- The usual round of smaller fixes and cleanups all over the tree
* tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype
x86/uaccess: Improve __try_cmpxchg64_user_asm() for x86_32
x86: Fix various duplicate-word comment typos
x86/boot: Remove superfluous type casting from arch/x86/boot/bitops.h
Linus Torvalds [Tue, 4 Oct 2022 17:14:58 +0000 (10:14 -0700)]
Merge tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache resource control updates from Borislav Petkov:
- More work by James Morse to disentangle the resctrl filesystem
generic code from the architectural one with the endgoal of plugging
ARM's MPAM implementation into it too so that the user interface
remains the same
- Properly restore the MSR_MISC_FEATURE_CONTROL value instead of
blindly overwriting it to 0
* tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes
x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data
x86/resctrl: Rename and change the units of resctrl_cqm_threshold
x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read()
x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read()
x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read()
x86/resctrl: Abstract __rmid_read()
x86/resctrl: Allow per-rmid arch private storage to be reset
x86/resctrl: Add per-rmid arch private storage for overflow and chunks
x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks
x86/resctrl: Allow update_mba_bw() to update controls directly
x86/resctrl: Remove architecture copy of mbps_val
x86/resctrl: Switch over to the resctrl mbps_val list
x86/resctrl: Create mba_sc configuration in the rdt_domain
x86/resctrl: Abstract and use supports_mba_mbps()
x86/resctrl: Remove set_mba_sc()s control array re-initialisation
x86/resctrl: Add domain offline callback for resctrl work
x86/resctrl: Group struct rdt_hw_domain cleanup
x86/resctrl: Add domain online callback for resctrl work
x86/resctrl: Merge mon_capable and mon_enabled
...
Linus Torvalds [Tue, 4 Oct 2022 17:12:08 +0000 (10:12 -0700)]
Merge tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x75 microcode loader updates from Borislav Petkov:
- Get rid of a single ksize() usage
- By popular demand, print the previous microcode revision an update
was done over
- Remove more code related to the now gone MICROCODE_OLD_INTERFACE
- Document the problems stemming from microcode late loading
* tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Track patch allocation size explicitly
x86/microcode: Print previous version of microcode after reload
x86/microcode: Remove ->request_microcode_user()
x86/microcode: Document the whole late loading problem
Linus Torvalds [Tue, 4 Oct 2022 17:00:27 +0000 (10:00 -0700)]
Merge tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Borislav Petkov:
- Drop misleading "RIP" from the opcodes dumping message
- Correct APM entry's Konfig help text
* tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Don't mention RIP in "Code: "
x86/Kconfig: Specify idle=poll instead of no-hlt
Linus Torvalds [Tue, 4 Oct 2022 16:49:50 +0000 (09:49 -0700)]
Merge tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm update from Borislav Petkov:
- Use the __builtin_ffs/ctzl() compiler builtins for the constant
argument case in the kernel's optimized ffs()/ffz() helpers in order
to make use of the compiler's constant folding optmization passes.
* tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/bitops: Use __builtin_ctzl() to evaluate constant expressions
x86/asm/bitops: Use __builtin_ffs() to evaluate constant expressions
Linus Torvalds [Tue, 4 Oct 2022 16:46:22 +0000 (09:46 -0700)]
Merge tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core fixes from Borislav Petkov:
- Make sure an INT3 is slapped after every unconditional retpoline JMP
as both vendors suggest
- Clean up pciserial a bit
* tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86,retpoline: Be sure to emit INT3 after JMP *%\reg
x86/earlyprintk: Clean up pciserial
Linus Torvalds [Tue, 4 Oct 2022 16:33:12 +0000 (09:33 -0700)]
Merge tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Borislav Petkov:
- Fix the APEI MCE callback handler to consult the hardware about the
granularity of the memory error instead of hard-coding it
- Offline memory pages on Intel machines after 2 errors reported per
page
* tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Retrieve poison range from hardware
RAS/CEC: Reduce offline page threshold for Intel systems
Linus Torvalds [Tue, 4 Oct 2022 16:21:30 +0000 (09:21 -0700)]
Merge tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Borislav Petkov:
- Print the CPU number at segfault time.
The number printed is not always accurate (preemption is enabled at
that time) but the print string contains "likely" and after a lot of
back'n'forth on this, this was the consensus that was reached. See
thread at [1].
- After a *lot* of testing and polishing, finally the clear_user()
improvements to inline REP; STOSB by default
Linus Torvalds [Tue, 4 Oct 2022 16:13:21 +0000 (09:13 -0700)]
Merge tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RTC cleanups from Borislav Petkov:
- Cleanup x86/rtc.c and delete duplicated functionality in favor of
using the respective functionality from the RTC library
* tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/rtc: Rename mach_set_rtc_mmss() to mach_set_cmos_time()
x86/rtc: Rewrite & simplify mach_get_cmos_time() by deleting duplicated functionality
Linus Torvalds [Tue, 4 Oct 2022 15:58:02 +0000 (08:58 -0700)]
Merge tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Add support for Skylake-S CPUs to ie31200_edac
- Improve error decoding speed of the Intel drivers by avoiding the
ACPI facilities but doing decoding in the driver itself
- Other misc improvements to the Intel drivers
- The usual cleanups and fixlets all over EDAC land
* tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/i7300: Correct the i7300_exit() function name in comment
x86/sb_edac: Add row column translation for Broadwell
EDAC/i10nm: Print an extra register set of retry_rd_err_log
EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM
EDAC/skx_common: Add ChipSelect ADXL component
EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations
EDAC: Remove obsolete declarations in edac_module.h
EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs
EDAC/skx_common: Make output format similar
EDAC/skx_common: Use driver decoder first
EDAC/mc: Drop duplicated dimm->nr_pages debug printout
EDAC/mc: Replace spaces with tabs in memtype flags definition
EDAC/wq: Remove unneeded flush_workqueue()
EDAC/ie31200: Add Skylake-S support
Borislav Petkov [Tue, 4 Oct 2022 08:00:25 +0000 (10:00 +0200)]
Merge branches 'edac-drivers' and 'edac-misc' into edac-updates-for-v6.1
Combine all queued EDAC changes for submission into v6.1:
* edac-drivers:
EDAC/ie31200: Add Skylake-S support
* edac-misc:
EDAC/i7300: Correct the i7300_exit() function name in comment
x86/sb_edac: Add row column translation for Broadwell
EDAC/i10nm: Print an extra register set of retry_rd_err_log
EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM
EDAC/skx_common: Add ChipSelect ADXL component
EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations
EDAC: Remove obsolete declarations in edac_module.h
EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs
EDAC/skx_common: Make output format similar
EDAC/skx_common: Use driver decoder first
EDAC/mc: Drop duplicated dimm->nr_pages debug printout
EDAC/mc: Replace spaces with tabs in memtype flags definition
EDAC/wq: Remove unneeded flush_workqueue()
Linus Torvalds [Tue, 4 Oct 2022 03:33:41 +0000 (20:33 -0700)]
Merge tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull STATX_DIOALIGN support from Eric Biggers:
"Make statx() support reporting direct I/O (DIO) alignment information.
This provides a generic interface for userspace programs to determine
whether a file supports DIO, and if so with what alignment
restrictions. Specifically, STATX_DIOALIGN works on block devices, and
on regular files when their containing filesystem has implemented
support.
An interface like this has been requested for years, since the
conditions for when DIO is supported in Linux have gotten increasingly
complex over time. Today, DIO support and alignment requirements can
be affected by various filesystem features such as multi-device
support, data journalling, inline data, encryption, verity,
compression, checkpoint disabling, log-structured mode, etc.
Further complicating things, Linux v6.0 relaxed the traditional rule
of DIO needing to be aligned to the block device's logical block size;
now user buffers (but not file offsets) only need to be aligned to the
DMA alignment.
The approach of uplifting the XFS specific ioctl XFS_IOC_DIOINFO was
discarded in favor of creating a clean new interface with statx().
For more information, see the individual commits and the man page
update[1]"
Link: https://lore.kernel.org/r/20220722074229.148925-1-ebiggers@kernel.org
* tag 'statx-dioalign-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
xfs: support STATX_DIOALIGN
f2fs: support STATX_DIOALIGN
f2fs: simplify f2fs_force_buffered_io()
f2fs: move f2fs_force_buffered_io() into file.c
ext4: support STATX_DIOALIGN
fscrypt: change fscrypt_dio_supported() to prepare for STATX_DIOALIGN
vfs: support STATX_DIOALIGN on block devices
statx: add direct I/O alignment information
Linus Torvalds [Tue, 4 Oct 2022 03:27:34 +0000 (20:27 -0700)]
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Minor changes to convert uses of kmap() to kmap_local_page()"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: use kmap_local_page() instead of kmap()
fs-verity: use memcpy_from_page()
Linus Torvalds [Tue, 4 Oct 2022 03:18:34 +0000 (20:18 -0700)]
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fscrypt updates from Eric Biggers:
"This release contains some implementation changes, but no new
features:
- Rework the implementation of the fscrypt filesystem-level keyring
to not be as tightly coupled to the keyrings subsystem. This
resolves several issues.
- Eliminate most direct uses of struct request_queue from fs/crypto/,
since struct request_queue is considered to be a block layer
implementation detail.
- Stop using the PG_error flag to track decryption failures. This is
a prerequisite for freeing up PG_error for other uses"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: work on block_devices instead of request_queues
fscrypt: stop holding extra request_queue references
fscrypt: stop using keyrings subsystem for fscrypt_master_key
fscrypt: stop using PG_error to track error status
fscrypt: remove fscrypt_set_test_dummy_encryption()
Linus Torvalds [Tue, 4 Oct 2022 03:11:59 +0000 (20:11 -0700)]
Merge tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Fix a couple races found with a new torture test
- Improve errors when api functions are used incorrectly
- Improve tracing for lock requests from user space
- Fix use after free in recently added tracing cod.
- Small internal code cleanups
* tag 'dlm-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
fs: dlm: fix possible use after free if tracing
fs: dlm: const void resource name parameter
fs: dlm: LSFL_CB_DELAY only for kernel lockspaces
fs: dlm: remove DLM_LSFL_FS from uapi
fs: dlm: trace user space callbacks
fs: dlm: change ls_clear_proc_locks to spinlock
fs: dlm: remove dlm_del_ast prototype
fs: dlm: handle rcom in else if branch
fs: dlm: allow lockspaces have zero lvblen
fs: dlm: fix invalid derefence of sb_lvbptr
fs: dlm: handle -EINVAL as log_error()
fs: dlm: use __func__ for function name
fs: dlm: handle -EBUSY first in unlock validation
fs: dlm: handle -EBUSY first in lock arg validation
fs: dlm: fix race between test_bit() and queue_work()
fs: dlm: fix race in lowcomms
Linus Torvalds [Tue, 4 Oct 2022 03:07:15 +0000 (20:07 -0700)]
Merge tag 'nfsd-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release is mostly bug fixes, clean-ups, and optimizations.
One notable set of fixes addresses a subtle buffer overflow issue that
occurs if a small RPC Call message arrives in an oversized RPC record.
This is only possible on a framed RPC transport such as TCP.
Because NFSD shares the receive and send buffers in one set of pages,
an oversized RPC record steals pages from the send buffer that will be
used to construct the RPC Reply message. NFSD must not assume that a
full-sized buffer is always available to it; otherwise, it will walk
off the end of the send buffer while constructing its reply.
In this release, we also introduce the ability for the server to wait
a moment for clients to return delegations before it responds with
NFS4ERR_DELAY. This saves a retransmit and a network round- trip when
a delegation recall is needed. This work will be built upon in future
releases.
The NFS server adds another shrinker to its collection. Because
courtesy clients can linger for quite some time, they might be
freeable when the server host comes under memory pressure. A new
shrinker has been added that releases courtesy client resources during
low memory scenarios.
Lastly, of note: the maximum number of operations per NFSv4 COMPOUND
that NFSD can handle is increased from 16 to 50. There are NFSv4
client implementations that need more than 16 to successfully perform
a mount operation that uses a pathname with many components"
* tag 'nfsd-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (53 commits)
nfsd: extra checks when freeing delegation stateids
nfsd: make nfsd4_run_cb a bool return function
nfsd: fix comments about spinlock handling with delegations
nfsd: only fill out return pointer on success in nfsd4_lookup_stateid
NFSD: fix use-after-free on source server when doing inter-server copy
NFSD: Cap rsize_bop result based on send buffer size
NFSD: Rename the fields in copy_stateid_t
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_file_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define nfsd_reply_cache_stats_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define client_info_fops
nfsd: use DEFINE_SHOW_ATTRIBUTE to define export_features_fops and supported_enctypes_fops
nfsd: use DEFINE_PROC_SHOW_ATTRIBUTE to define nfsd_proc_ops
NFSD: Pack struct nfsd4_compoundres
NFSD: Remove unused nfsd4_compoundargs::cachetype field
NFSD: Remove "inline" directives on op_rsize_bop helpers
NFSD: Clean up nfs4svc_encode_compoundres()
SUNRPC: Fix typo in xdr_buf_subsegment's kdoc comment
NFSD: Clean up WRITE arg decoders
NFSD: Use xdr_inline_decode() to decode NFSv3 symlinks
NFSD: Refactor common code out of dirlist helpers
...
Linus Torvalds [Tue, 4 Oct 2022 03:01:40 +0000 (20:01 -0700)]
Merge tag 'erofs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, for container use cases, fscache-based shared domain is
introduced [1] so that data blobs in the same domain will be storage
deduplicated and it will also be used for page cache sharing later.
Also, a special packed inode is now introduced to record inode
fragments which keep the tail part of files by Yue Hu [2]. You can
keep arbitary length or (at will) the whole file as a fragment and
then fragments can be optionally compressed in the packed inode
together and even deduplicated for smaller image sizes.
In addition to that, global compressed data deduplication by sharing
partial-referenced pclusters is also supported in this cycle.
Summary:
- Introduce fscache-based domain to share blobs between images
- Support recording fragments in a special packed inode
- Support partial-referenced pclusters for global compressed data
deduplication
- Fix an order >= MAX_ORDER warning due to crafted negative i_size
- Several cleanups"
Link: https://lore.kernel.org/r/20220916085940.89392-1-zhujia.zj@bytedance.com Link: https://lore.kernel.org/r/cover.1663065968.git.huyue2@coolpad.com
* tag 'erofs-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: clean up erofs_iget()
erofs: clean up unnecessary code and comments
erofs: fold in z_erofs_reload_indexes()
erofs: introduce partial-referenced pclusters
erofs: support on-disk compressed fragments data
erofs: support interlaced uncompressed data for compressed files
erofs: clean up .read_folio() and .readahead() in fscache mode
erofs: introduce 'domain_id' mount option
erofs: Support sharing cookies in the same domain
erofs: introduce a pseudo mnt to manage shared cookies
erofs: introduce fscache-based domain
erofs: code clean up for fscache
erofs: use kill_anon_super() to kill super in fscache mode
erofs: fix order >= MAX_ORDER warning due to crafted negative i_size
Linus Torvalds [Tue, 4 Oct 2022 02:54:29 +0000 (19:54 -0700)]
Merge tag 'fs.vfsuid.fat.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull fatfs vfsuid conversion from Christian Brauner:
"Last cycle we introduced the new vfs{g,u}id_t types that we had agreed
on. The most important parts of the vfs have been converted but there
are a few more places we need to switch before we can remove the old
helpers completely.
This cycle we converted all filesystems that called idmapped mount
helpers directly. The affected filesystems are f2fs, fat, fuse, ksmbd,
overlayfs, and xfs. We've sent patches for all of them. Looking at
-next f2fs, ksmbd, overlayfs, and xfs have all picked up these patches
and they should land in mainline during the v6.1 merge window.
So all filesystems that have a separate tree should send the vfsuid
conversion themselves. Onle the fat conversion is going through this
generic fs trees because there is no fat tree.
In order to change time settings on an inode fat checks that the
caller either is the owner of the inode or the inode's group is in the
caller's group list. If fat is on an idmapped mount we compare whether
the inode mapped into the mount is equivalent to the caller's fsuid.
If it isn't we compare whether the inode's group mapped into the mount
is in the caller's group list.
We now use the new vfsuid based helpers for that"
* tag 'fs.vfsuid.fat.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fat: port to vfs{g,u}id_t and associated helpers
Linus Torvalds [Tue, 4 Oct 2022 02:48:54 +0000 (19:48 -0700)]
Merge tag 'fs.acl.rework.prep.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs acl updates from Christian Brauner:
"These are general fixes and preparatory changes related to the ongoing
posix acl rework. The actual rework where we build a type safe posix
acl api wasn't ready for this merge window but we're hopeful for the
next merge window.
General fixes:
- Some filesystems like 9p and cifs have to implement custom posix
acl handlers because they require access to the dentry in order to
set and get posix acls while the set and get inode operations
currently don't. But the ntfs3 filesystem has no such requirement
and thus implemented custom posix acl xattr handlers when it really
didn't have to. So this pr contains patch that just implements set
and get inode operations for ntfs3 and switches it to rely on the
generic posix acl xattr handlers. (We would've appreciated reviews
from the ntfs3 maintainers but we didn't get any. But hey, if we
really broke it we'll fix it. But fstests for ntfs3 said it's
fine.)
- The posix_acl_fix_xattr_common() helper has been adapted so it can
be used by a few more callers and avoiding open-coding the same
checks over and over.
Other than the two general fixes this series introduces a new helper
vfs_set_acl_prepare(). The reason for this helper is so that we can
mitigate one of the source that change {g,u}id values directly in the
uapi struct. With the vfs_set_acl_prepare() helper we can move the
idmapped mount fixup into the generic posix acl set handler.
The advantage of this is that it allows us to remove the
posix_acl_setxattr_idmapped_mnt() helper which so far we had to call
in vfs_setxattr() to account for idmapped mounts. While semantically
correct the problem with this approach was that we had to keep the
value parameter of the generic vfs_setxattr() call as non-const. This
is rectified in this series.
Ultimately, we will get rid of all the extreme kludges and type
unsafety once we have merged the posix api - hopefully during the next
merge window - built solely around get and set inode operations. Which
incidentally will also improve handling of posix acls in security and
especially in integrity modesl. While this will come with temporarily
having two inode operation for posix acls that is nothing compared to
the problems we have right now and so well worth it. We'll end up with
something that we can actually reason about instead of needing to
write novels to explain what's going on"
* tag 'fs.acl.rework.prep.v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
xattr: always us is_posix_acl_xattr() helper
acl: fix the comments of posix_acl_xattr_set
xattr: constify value argument in vfs_setxattr()
ovl: use vfs_set_acl_prepare()
acl: move idmapping handling into posix_acl_xattr_set()
acl: add vfs_set_acl_prepare()
acl: return EOPNOTSUPP in posix_acl_fix_xattr_common()
ntfs3: rework xattr handlers and switch to POSIX ACL VFS helpers
Linus Torvalds [Tue, 4 Oct 2022 00:51:52 +0000 (17:51 -0700)]
Merge tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM updates from Paul Moore:
"Seven patches for the LSM layer and we've got a mix of trivial and
significant patches. Highlights below, starting with the smaller bits
first so they don't get lost in the discussion of the larger items:
- Remove some redundant NULL pointer checks in the common LSM audit
code.
- Ratelimit the lockdown LSM's access denial messages.
With this change there is a chance that the last visible lockdown
message on the console is outdated/old, but it does help preserve
the initial series of lockdown denials that started the denial
message flood and my gut feeling is that these might be the more
valuable messages.
- Open userfaultfds as readonly instead of read/write.
While this code obviously lives outside the LSM, it does have a
noticeable impact on the LSMs with Ondrej explaining the situation
in the commit description. It is worth noting that this patch
languished on the VFS list for over a year without any comments
(objections or otherwise) so I took the liberty of pulling it into
the LSM tree after giving fair notice. It has been in linux-next
since the end of August without any noticeable problems.
- Add a LSM hook for user namespace creation, with implementations
for both the BPF LSM and SELinux.
Even though the changes are fairly small, this is the bulk of the
diffstat as we are also including BPF LSM selftests for the new
hook.
It's also the most contentious of the changes in this pull request
with Eric Biederman NACK'ing the LSM hook multiple times during its
development and discussion upstream. While I've never taken NACK's
lightly, I'm sending these patches to you because it is my belief
that they are of good quality, satisfy a long-standing need of
users and distros, and are in keeping with the existing nature of
the LSM layer and the Linux Kernel as a whole.
The patches in implement a LSM hook for user namespace creation
that allows for a granular approach, configurable at runtime, which
enables both monitoring and control of user namespaces. The general
consensus has been that this is far preferable to the other
solutions that have been adopted downstream including outright
removal from the kernel, disabling via system wide sysctls, or
various other out-of-tree mechanisms that users have been forced to
adopt since we haven't been able to provide them an upstream
solution for their requests. Eric has been steadfast in his
objections to this LSM hook, explaining that any restrictions on
the user namespace could have significant impact on userspace.
While there is the possibility of impacting userspace, it is
important to note that this solution only impacts userspace when it
is requested based on the runtime configuration supplied by the
distro/admin/user. Frederick (the pathset author), the LSM/security
community, and myself have tried to work with Eric during
development of this patchset to find a mutually acceptable
solution, but Eric's approach and unwillingness to engage in a
meaningful way have made this impossible. I have CC'd Eric directly
on this pull request so he has a chance to provide his side of the
story; there have been no objections outside of Eric's"
* tag 'lsm-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: ratelimit denial messages
userfaultfd: open userfaultfds with O_RDONLY
selinux: Implement userns_create hook
selftests/bpf: Add tests verifying bpf lsm userns_create hook
bpf-lsm: Make bpf_lsm_userns_create() sleepable
security, lsm: Introduce security_create_user_ns()
lsm: clean up redundant NULL pointer check
Linus Torvalds [Tue, 4 Oct 2022 00:45:15 +0000 (17:45 -0700)]
Merge tag 'selinux-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux updates from Paul Moore:
"Six SELinux patches, all are simple and easily understood, but a list
of the highlights is below:
- Use 'grep -E' instead of 'egrep' in the SELinux policy install
script.
Fun fact, this seems to be GregKH's *second* dedicated SELinux
patch since we transitioned to git (ignoring merges, the SPDX
stuff, and a trivial fs reference removal when lustre was yanked);
the first was back in 2011 when selinuxfs was placed in
/sys/fs/selinux. Oh, the memories ...
- Convert the SELinux policy boolean values to use signed integer
types throughout the SELinux kernel code.
Prior to this we were using a mix of signed and unsigned integers
which was probably okay in this particular case, but it is
definitely not a good idea in general.
- Remove a reference to the SELinux runtime disable functionality in
/etc/selinux/config as we are in the process of deprecating that.
See [1] for more background on this if you missed the previous
notes on the deprecation.
- Minor cleanups: remove unneeded variables and function parameter
constification"
Link: https://github.com/SELinuxProject/selinux-kernel/wiki/DEPRECATE-runtime-disable
* tag 'selinux-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: remove runtime disable message in the install_policy.sh script
selinux: use "grep -E" instead of "egrep"
selinux: remove the unneeded result variable
selinux: declare read-only parameters const
selinux: use int arrays for boolean values
selinux: remove an unneeded variable in sel_make_class_dir_entries()
Merge in the left-over fixes before the net-next pull-request.
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c e9553af106a9 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") e17be8581378 ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc")
https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/
kernel/bpf/helpers.c 9d674861c77d ("bpf: Gate dynptr API behind CAP_BPF") 0b894e472a94 ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") fecdb8943871 ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/
Linus Torvalds [Tue, 4 Oct 2022 00:42:12 +0000 (17:42 -0700)]
Merge tag 'integrity-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Just two bug fixes"
* tag 'integrity-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
efi: Correct Macmini DMI match in uefi cert quirk
ima: fix blocking of security.ima xattrs of unsupported algorithms
Linus Torvalds [Tue, 4 Oct 2022 00:38:09 +0000 (17:38 -0700)]
Merge tag 'Smack-for-6.1' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"Two minor code clean-ups: one removes constants left over from the old
mount API, while the other gets rid of an unneeded variable.
The other change fixes a flaw in handling IPv6 labeling"
* tag 'Smack-for-6.1' of https://github.com/cschaufler/smack-next:
smack: cleanup obsolete mount option flags
smack: lsm: remove the unneeded result variable
SMACK: Add sk_clone_security LSM hook
The _SLOW designation wasn't really descriptive of anything. This is
meant to be called from process context when it's possible to sleep. So
name this more aptly _SLEEPABLE, which better fits its intended use.
Fixes: 4021e1a2ce29 ("once: add DO_ONCE_SLOW() for sleepable contexts") Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221003181413.1221968-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Mon, 3 Oct 2022 06:52:00 +0000 (08:52 +0200)]
ethtool: add interface to interact with Ethernet Power Equipment
Add interface to support Power Sourcing Equipment. At current step it
provides generic way to address all variants of PSE devices as defined
in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4
PoDL Power Sourcing Equipment (PSE).
Currently supported and mandatory objects are:
IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus
IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState
IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl
This is minimal interface needed to control PSE on each separate
ethernet port but it provides not all mandatory objects specified in
IEEE 802.3-2018.
Since "PoDL PSE" and "PSE" have similar names, but some different values
I decide to not merge them and keep separate naming schema. This should
allow as to be as close to IEEE 802.3 spec as possible and avoid name
conflicts in the future.
This implementation is connected to PHYs instead of MACs because PSE
auto classification can potentially interfere with PHY auto negotiation.
So, may be some extra PHY related initialization will be needed.
With WIP version of ethtools interaction with PSE capable link looks
as following:
$ ip l
...
5: t1l1@eth0: <BROADCAST,MULTICAST> ..
...
$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: disabled
PoDL PSE Power Detection Status: disabled
$ ethtool --set-pse t1l1 podl-pse-admin-control enable
$ ethtool --show-pse t1l1
PSE attributs for t1l1:
PoDL PSE Admin State: enabled
PoDL PSE Power Detection Status: delivering power
Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel [Mon, 3 Oct 2022 06:51:57 +0000 (08:51 +0200)]
net: add framework to support Ethernet PSE and PDs devices
This framework was create with intention to provide support for Ethernet PSE
(Power Sourcing Equipment) and PDs (Powered Device).
At current step this patch implements generic PSE support for PoDL (Power over
Data Lines 802.3bu) specification with reserving name space for PD devices as
well.
This framework can be extended to support 802.3af and 802.3at "Power via the
Media Dependent Interface" (or PoE/Power over Ethernet)
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Al Viro [Tue, 4 Oct 2022 00:26:08 +0000 (20:26 -0400)]
[brown paperbag] fix coredump breakage
Let me count the ways in which I'd screwed up:
* when emitting a page, handling of gaps in coredump should happen
before fetching the current file position.
* fix for a problem that occurs on rather uncommon setups (and hadn't
been observed in the wild) had been sent very late in the cycle.
* ... with badly insufficient testing, introducing an easily
reproducible breakage. Without giving it time to soak in -next.
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: "J. R. Okajima" <hooanon05g@gmail.com> Tested-by: "J. R. Okajima" <hooanon05g@gmail.com> Fixes: ef5eaef963e5 "[coredump] don't use __kernel_write() on kmap_local_page()" Cc: stable@kernel.org # v6.0-only Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Linus Torvalds [Tue, 4 Oct 2022 00:24:22 +0000 (17:24 -0700)]
Merge tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening updates from Kees Cook:
"Most of the collected changes here are fixes across the tree for
various hardening features (details noted below).
The most notable new feature here is the addition of the memcpy()
overflow warning (under CONFIG_FORTIFY_SOURCE), which is the next step
on the path to killing the common class of "trivially detectable"
buffer overflow conditions (i.e. on arrays with sizes known at compile
time) that have resulted in many exploitable vulnerabilities over the
years (e.g. BleedingTooth).
This feature is expected to still have some undiscovered false
positives. It's been in -next for a full development cycle and all the
reported false positives have been fixed in their respective trees.
All the known-bad code patterns we could find with Coccinelle are also
either fixed in their respective trees or in flight.
The commit message in commit 1e3853175bc5 ("fortify: Add run-time WARN
for cross-field memcpy()") for the feature has extensive details, but
I'll repeat here that this is a warning _only_, and is not intended to
actually block overflows (yet). The many patches fixing array sizes
and struct members have been landing for several years now, and we're
finally able to turn this on to find any remaining stragglers.
- zero-call-used-regs: Add missing clobbers in paravirt (Bill
Wendling).
- CFI: clean up sparc function pointer type mismatches (Bart Van
Assche).
- Clang: Adjust compiler flag detection for various Clang changes
(Sami Tolvanen, Kees Cook).
- fortify: Fix warnings in arch-specific code in sh, ARM, and xen.
Improvements to existing features:
- testing: improve overflow KUnit test, introduce fortify KUnit test,
add more coverage to LKDTM tests (Bart Van Assche, Kees Cook).
- overflow: Relax overflow type checking for wider utility.
New features:
- string: Introduce strtomem() and strtomem_pad() to fill a gap in
strncpy() replacement needs.
- um: Enable FORTIFY_SOURCE support.
- fortify: Enable run-time struct member memcpy() overflow warning"
* tag 'hardening-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (27 commits)
Makefile.extrawarn: Move -Wcast-function-type-strict to W=1
hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero
sparc: Unbreak the build
x86/paravirt: add extra clobbers with ZERO_CALL_USED_REGS enabled
x86/paravirt: clean up typos and grammaros
fortify: Convert to struct vs member helpers
fortify: Explicitly check bounds are compile-time constants
x86/entry: Work around Clang __bdos() bug
ARM: decompressor: Include .data.rel.ro.local
fortify: Adjust KUnit test for modular build
sh: machvec: Use char[] for section boundaries
kunit/memcpy: Avoid pathological compile-time string size
lib: Improve the is_signed_type() kunit test
LoadPin: Require file with verity root digests to have a header
dm: verity-loadpin: Only trust verity targets with enforcement
LoadPin: Fix Kconfig doc about format of file with verity digests
um: Enable FORTIFY_SOURCE
lkdtm: Update tests for memcpy() run-time warnings
fortify: Add run-time WARN for cross-field memcpy()
fortify: Use SIZE_MAX instead of (size_t)-1
...
Add support for nexthop routes for Marvell Prestera driver.
Subscribe on NEIGH_UPDATE events.
Add features:
- Support connected route adding
e.g.: "ip address add 1.1.1.1/24 dev sw1p1"
e.g.: "ip route add 6.6.6/24 dev sw1p1"
- Support nexthop route adding
e.g.: "ip route add 5.5.5/24 via 1.1.1.2"
- Support ECMP route adding
e.g.: "ip route add 5.5.5/24 nexthop via 1.1.1.2 nexthop via 1.1.1.3"
- Support "offload" and "trap" flags per each nexthop
- Support "offload" flag for neighbours
Limitations:
- Only "local" and "main" tables supported
- Only generic interfaces supported for router (no bridges or vlans)
Flags meaning:
ip route add 5.5.5/24 nexthop via 2.2.2.2 nexthop via 2.2.2.3
ip route show
...
5.5.5.0/24 rt_offload
nexthop via 2.2.2.2 dev sw1p31 weight 1 trap
nexthop via 2.2.2.3 dev sw1p31 weight 1 trap
...
# When you just add route - lpm entry became occupied
# in HW ("rt_offload" flag), but related to nexthops neighbours
# still not resolved ("trap" flag).
#
# After some time...
ip route show
...
5.5.5.0/24 rt_offload
nexthop via 2.2.2.2 dev sw1p31 weight 1 offload
nexthop via 2.2.2.3 dev sw1p31 weight 1 offload
...
# You will see, that appropriate neighbours was resolved and nexthop
# entries occupied in HW too ("offload" flag)
Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Changes for v2:
* Add more reviewers in CC
* Check if route nexthop or direct with fib_nh_gw_family instead of fib_nh_scope
This is needed after, 7c0d80225cc9 ("ip: fix dflt addr selection for connected nexthop"),
because direct route is now with the same scope as nexthop (RT_SCOPE_LINK)
Changes for v3:
* Resolve "unused functions" warnings, after
patch ("net: marvell: prestera: Add heplers to interact ... "), and before
patch ("net: marvell: prestera: Add neighbour cache accounting")
Changes for v4:
* Rebase to the latest master to resolve patch applying issues
Changes for v5:
* Repack structures to prevent holes
* Remove unused variables
* Fix misspeling issues
Changes for v6:
* Rebase on top of master
* Fix smatch warnings
Changes for v7:
* Rebase on top of master
* Refactor: use "fib_lookup" instead of "fib_new_table"+"fib_table_lookup",
according to Paolo Abeni suggestion
* Refactor: use "rhashtable_free_and_destroy" instead of rhashtable
walk, according to Paolo Abeni suggestion
====================
Yevhen Orlov [Sat, 1 Oct 2022 09:34:17 +0000 (12:34 +0300)]
net: marvell: prestera: Propagate nh state from hw to kernel
We poll nexthops in HW and call for each active nexthop appropriate
neighbour.
Also we provide implicity neighbour resolving.
For example, user have added nexthop route:
# ip route add 5.5.5.5 via 1.1.1.2
But neighbour 1.1.1.2 doesn't exist. In this case we will try to call
neigh_event_send, even if there is no traffic.
This is useful, when you have add route, which will be used after some
time but with a lot of traffic (burst). So, we has prepared, offloaded
route in advance.
Move forward and use new PRESTERA_FIB_TYPE_UC_NH to provide basic
nexthop routes support.
Provide deinitialization sequence for all created router objects.
Limitations:
- Only "local" and "main" tables supported
- Only generic interfaces supported for router (no bridges or vlans)
Yevhen Orlov [Sat, 1 Oct 2022 09:34:14 +0000 (12:34 +0300)]
net: marvell: prestera: Add heplers to interact with fib_notifier_info
This will be used to implement nexthops related logic in next patches.
Also try to keep ipv4/6 abstraction to be able to reuse helpers for ipv6
in the future.
Yevhen Orlov [Sat, 1 Oct 2022 09:34:11 +0000 (12:34 +0300)]
net: marvell: prestera: Add strict cleanup of fib arbiter
This will, ensure, that there is no more, preciously allocated fib_cache
entries left after deinit.
Will be used to free allocated resources of nexthop routes, that points
to "not our" port (e.g. eth0).
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yevhen Orlov [Sat, 1 Oct 2022 09:34:10 +0000 (12:34 +0300)]
net: marvell: prestera: Add cleanup of allocated fib_nodes
Do explicity cleanup on router_hw_fini, to ensure, that all allocated
objects cleaned. This will be used in cases,
when upper layer (cache) is not mapped to router_hw layer.
Yevhen Orlov [Sat, 1 Oct 2022 09:34:09 +0000 (12:34 +0300)]
net: marvell: prestera: Add router nexthops ABI
- Add functions to allocate/delete/set nexthop group
- NOTE: non-ECMP nexthop is nexthop group with allocated size = 1
- Add function to read state of HW nh (if packets going through it)
Linus Torvalds [Tue, 4 Oct 2022 00:11:07 +0000 (17:11 -0700)]
Merge tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kcfi updates from Kees Cook:
"This replaces the prior support for Clang's standard Control Flow
Integrity (CFI) instrumentation, which has required a lot of special
conditions (e.g. LTO) and work-arounds.
The new implementation ("Kernel CFI") is specific to C, directly
designed for the Linux kernel, and takes advantage of architectural
features like x86's IBT. This series retains arm64 support and adds
x86 support.
GCC support is expected in the future[1], and additional "generic"
architectural support is expected soon[2].
Summary:
- treewide: Remove old CFI support details
- arm64: Replace Clang CFI support with Clang KCFI support
- x86: Introduce Clang KCFI support"
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107048 Link: https://github.com/samitolvanen/llvm-project/commits/kcfi_generic
* tag 'kcfi-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
x86: Add support for CONFIG_CFI_CLANG
x86/purgatory: Disable CFI
x86: Add types to indirectly called assembly functions
x86/tools/relocs: Ignore __kcfi_typeid_ relocations
kallsyms: Drop CONFIG_CFI_CLANG workarounds
objtool: Disable CFI warnings
objtool: Preserve special st_shndx indexes in elf_update_symbol
treewide: Drop __cficanonical
treewide: Drop WARN_ON_FUNCTION_MISMATCH
treewide: Drop function_nocfi
init: Drop __nocfi from __init
arm64: Drop unneeded __nocfi attributes
arm64: Add CFI error handling
arm64: Add types to indirect called assembly functions
psci: Fix the function type for psci_initcall_t
lkdtm: Emit an indirect call for CFI tests
cfi: Add type helper macros
cfi: Switch to -fsanitize=kcfi
cfi: Drop __CFI_ADDRESSABLE
cfi: Remove CONFIG_CFI_CLANG_SHADOW
...
Jakub Kicinski [Sun, 2 Oct 2022 17:56:50 +0000 (10:56 -0700)]
eth: octeon: fix build after netif_napi_add() changes
Guenter reports I missed a netif_napi_add() call
in one of the platform-specific drivers:
drivers/net/ethernet/cavium/octeon/octeon_mgmt.c: In function 'octeon_mgmt_probe':
drivers/net/ethernet/cavium/octeon/octeon_mgmt.c:1399:9: error: too many arguments to function 'netif_napi_add'
1399 | netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll,
| ^~~~~~~~~~~~~~
Linus Torvalds [Mon, 3 Oct 2022 23:56:40 +0000 (16:56 -0700)]
Merge tag 'execve-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"This removes a.out support globally; it has been disabled for a while
now.
- Remove a.out implementation globally (Eric W. Biederman)
- Remove unused linux_binprm::taso member (Lukas Bulwahn)"
* tag 'execve-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt: remove taso from linux_binprm struct
a.out: Remove the a.out implementation
Jakub Kicinski [Mon, 3 Oct 2022 23:55:33 +0000 (16:55 -0700)]
Merge branch 'mlx5-xsk-updates-part4-and-more'
Saeed Mahameed says:
====================
mlx5 xsk updates part4 and more
1) Final part of xsk improvements,
in this series Maxim continues to improve xsk implementation
a) XSK Busy polling support
b) Use KLM to avoid Frame overrun in unaligned mode
c) Optimize unaligned more for certain frame sizes
d) Other straight forward minor optimizations.
part 1: https://lore.kernel.org/netdev/20220927203611.244301-1-saeed@kernel.org/
part 2: https://lore.kernel.org/netdev/20220929072156.93299-1-saeed@kernel.org/
part 3: https://lore.kernel.org/netdev/20220930162903.62262-1-saeed@kernel.org/
2) Oversize packets firmware counter, from Gal.
3) Set default grace period for health reporters based on function type
4) Some minor E-Switch improvements
====================
Chris Mi [Sun, 2 Oct 2022 04:56:31 +0000 (21:56 -0700)]
net/mlx5: E-switch, Don't update group if qos is not enabled
Currently, qos group will be updated and qos will be enabled when
unregistering devlink port. Actually no need to update group if qos
is not enabled.
Add a check to prevent unnecessary enabling and disabling qos for
every port.
Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Roi Dayan [Sun, 2 Oct 2022 04:56:30 +0000 (21:56 -0700)]
net/mlx5: E-Switch, Allow offloading fwd dest flow table with vport
Before this commit a fwd dest flow table resulted in ignoring vport dests
which is incorrect and is supported.
With this commit the dests can be a mix of flow table and vport dests.
There is still a limitation that there cannot be more than one flow table dest.
Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maher Sanalla [Sun, 2 Oct 2022 04:56:29 +0000 (21:56 -0700)]
net/mlx5: Set default grace period based on function type
Currently, driver sets the same grace period for fw fatal health reporter
to any type of function.
Since the lower level functions are more vulnerable to fw fatal errors as a
result of parent function closure/reload, set a smaller grace period for
the lower level functions, as follows:
1. For ECPF: 180 seconds.
2. For PF: 60 seconds.
3. For VF/SF: 30 seconds.
Moshe Shemesh [Sun, 2 Oct 2022 04:56:28 +0000 (21:56 -0700)]
net/mlx5: Start health poll at earlier stage of driver load
Start health poll at earlier stage, so if fw fatal issue occurred before
or during initialization commands such as init_hca or set_hca_cap the
poll health can detect and indicate that the driver is already in error
state.
Gal Pressman [Sun, 2 Oct 2022 04:56:27 +0000 (21:56 -0700)]
net/mlx5e: Expose rx_oversize_pkts_buffer counter
Add the rx_oversize_pkts_buffer counter to ethtool statistics.
This counter exposes the number of dropped received packets due to
length which arrived to RQ and exceed software buffer size allocated by
the device for incoming traffic. It might imply that the device MTU is
larger than the software buffers size.
Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: xsk: Optimize for unaligned mode with 3072-byte frames
When XSK frame size is 3072 (or another power of two multiplied by 3),
KLM mechanism for NIC virtual memory page mapping can be optimized by
replacing it with KSM.
Before this change, two KLM entries were needed to map an XSK frame that
is not a power of two: one entry maps the UMEM memory up to the frame
length, the other maps the rest of the stride to the garbage page.
When the frame length divided by 3 is a power of two, it can be mapped
using 3 KSM entries, and the fourth will map the rest of the stride to
the garbage page. All 4 KSM entries are of the same size, which allows
for a much faster lookup.
Frame size 3072 is useful in certain use cases, because it allows
packing 4 frames into 3 pages. Generally speaking, other frame sizes
equal to PAGE_SIZE minus a power of two can be optimized in a similar
way, but it will require many more KSMs per frame, which slows down UMRs
a little bit, but more importantly may hit the limit for the maximum
number of KSM entries.
net/mlx5e: xsk: Print a warning in slow configurations
On striding RQ, when the XSK frame size doesn't match the MKey page
size, KLM is used for memory mappings, which is a slower mechanism than
MTT or KSM. It may happen in two cases:
1. Frame size is not a power of two (only possible in the unaligned mode
of XSK).
2. Frame size is 2048 bytes, and the firmware doesn't support MKey pages
smaller than 4096 bytes.
Depending on the case, print a warning and recommend to disable striding
RQ or upgrade the firmware.
net/mlx5e: xsk: Use KLM to protect frame overrun in unaligned mode
XSK RQs support striding RQ linear mode, but the stride size may be
bigger than the XSK frame size, because:
1. The stride size must be a power of two.
2. The stride size must be equal to the UMR page size. Each XSK frame is
treated as a separate page, because they aren't necessarily adjacent in
physical memory, so the driver can't put more than one stride per page.
3. The minimal MTT page size is 4096 on older firmware.
That means that if XSK frame size is 2048 or not a power of two, the
strides may be bigger than XSK frames. Normally, it's not a problem if
the hardware enforces the MTU. However, traffic between vports skips the
hardware MTU check, and oversized packets may be received.
If an oversized packet is bigger than the XSK frame but not bigger than
the stride, it will cause overwriting of the adjacent UMEM region. If
the packet takes more than one stride, they can be recycled for reuse,
so it's not a problem when the XSK frame size matches the stride size.
Work around the above issue by leveraging KLM to make a more
fine-grained mapping. The beginning of each stride is mapped to the
frame memory, and the padding up to the closest power of two is mapped
to the overflow page that doesn't belong to UMEM. This way, application
data corruption won't happen upon receiving packets bigger than MTU.
net/mlx5e: xsk: Use umr_mode to calculate striding RQ parameters
Instead of passing the unaligned flag, pass an enum that indicates the
UMR mode. The next commit will add the third mode (KLM for certain
configurations of XSK), which will be added to this enum instead of
adding another bool flag everywhere.
XSK need_wakeup mechanism allows the driver to stop busy waiting for
buffers when the fill ring is empty, yield to the application and signal
it that the driver needs to be waken up after the application refills
the fill ring.
Add protection against the race condition on the RX (refill) side: if
the application refills buffers after xskrq->post_wqes is called, but
before mlx5e_xsk_update_rx_wakeup, NAPI will exit, skipping taking these
buffers to the hardware WQ, and the application won't wake it up again.
Optimize the whole need_wakeup logic, removing unneeded flows, to
compensate for this new check.
net/mlx5e: xsk: Include XSK skb_from_cqe callbacks in INDIRECT_CALL
XSK is a performance-critical data path. To avoid an indirect function
call with a retpoline, include XSK callbacks in the INDIRECT_CALL macro,
so that they are called directly in XSK flows.
net/mlx5e: xsk: Flush RQ on XSK activation to save memory
The regular RQ remains open after opening an XSK socket, in order to
guarantee that closing the XSK socket never fails due to an error when
reopening the regular RQ.
To save memory, the regular RQ can be deactivated and flushed, releasing
all pages, when an XSK socket is open.
When mvpp2 is unloaded, the driver specific debugfs directory is not
removed, which technically leads to a memory leak. However, this
directory is only created when the first device is probed, so the
hardware is present. Removing the module is only something a developer
would to when e.g. testing out changes, so the module would be
reloaded. So this memory leak is minor.
The original attempt in commit 5f23e1396e1f ("net: mvpp2: debugfs: fix
memory leak when using debugfs_lookup()") that was labelled as a memory
leak fix was not, it fixed a refcount leak, but in doing so created a
problem when the module is reloaded - the directory already exists, but
mvpp2_root is NULL, so we lose all debugfs entries. This fix has been
reverted.
This is the alternative fix, where we remove the offending directory
whenever the driver is unloaded.
Fixes: a8fd6ab05737 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/E1ofOAB-00CzkG-UO@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alex Elder [Fri, 30 Sep 2022 22:45:27 +0000 (17:45 -0500)]
net: ipa: update comments
This patch just updates comments throughout the IPA code.
Transaction state is now tracked using indexes into an array rather
than linked lists, and a few comments refer to the "old way" of
doing things. The description of how transactions are used was
changed to refer to "operations" rather than "commands", to
(hopefully) remove a possible ambiguity.
IPA register offsets and fields are now handled differently as well,
and the register documentation is updated to better describe the
code.
A few minor updates to comments were made (e.g., adding a missing
word, fixing a typo or punctuation, etc.).
Finally, the local macro atomic_dec_not_zero() is no longer used, so
it is deleted.
Linus Torvalds [Mon, 3 Oct 2022 23:39:37 +0000 (16:39 -0700)]
Merge tag 'rust-v6.1-rc1' of https://github.com/Rust-for-Linux/linux
Pull Rust introductory support from Kees Cook:
"The tree has a recent base, but has fundamentally been in linux-next
for a year and a half[1]. It's been updated based on feedback from the
Kernel Maintainer's Summit, and to gain recent Reviewed-by: tags.
Miguel is the primary maintainer, with me helping where needed/wanted.
Our plan is for the tree to switch to the standard non-rebasing
practice once this initial infrastructure series lands.
The contents are the absolute minimum to get Rust code building in the
kernel, with many more interfaces[2] (and drivers - NVMe[3], 9p[4], M1
GPU[5]) on the way.
The initial support of Rust-for-Linux comes in roughly 4 areas:
- Kernel internals (kallsyms expansion for Rust symbols, %pA format)
- Kbuild infrastructure (Rust build rules and support scripts)
- Rust crates and bindings for initial minimum viable build
- Rust kernel documentation and samples
Rust support has been in linux-next for a year and a half now, and the
short log doesn't do justice to the number of people who have
contributed both to the Linux kernel side but also to the upstream
Rust side to support the kernel's needs. Thanks to these 173 people,
and many more, who have been involved in all kinds of ways:
Miguel Ojeda, Wedson Almeida Filho, Alex Gaynor, Boqun Feng, Gary Guo,
Björn Roy Baron, Andreas Hindborg, Adam Bratschi-Kaye, Benno Lossin,
Maciej Falkowski, Finn Behrens, Sven Van Asbroeck, Asahi Lina, FUJITA
Tomonori, John Baublitz, Wei Liu, Geoffrey Thomas, Philip Herron,
Arthur Cohen, David Faust, Antoni Boucher, Philip Li, Yujie Liu,
Jonathan Corbet, Greg Kroah-Hartman, Paul E. McKenney, Josh Triplett,
Kent Overstreet, David Gow, Alice Ryhl, Robin Randhawa, Kees Cook,
Nick Desaulniers, Matthew Wilcox, Linus Walleij, Joe Perches, Michael
Ellerman, Petr Mladek, Masahiro Yamada, Arnaldo Carvalho de Melo,
Andrii Nakryiko, Konstantin Shelekhin, Rasmus Villemoes, Konstantin
Ryabitsev, Stephen Rothwell, Andy Shevchenko, Sergey Senozhatsky, John
Paul Adrian Glaubitz, David Laight, Nathan Chancellor, Jonathan
Cameron, Daniel Latypov, Shuah Khan, Brendan Higgins, Julia Lawall,
Laurent Pinchart, Geert Uytterhoeven, Akira Yokosawa, Pavel Machek,
David S. Miller, John Hawley, James Bottomley, Arnd Bergmann,
Christian Brauner, Dan Robertson, Nicholas Piggin, Zhouyi Zhou, Elena
Zannoni, Jose E. Marchesi, Leon Romanovsky, Will Deacon, Richard
Weinberger, Randy Dunlap, Paolo Bonzini, Roland Dreier, Mark Brown,
Sasha Levin, Ted Ts'o, Steven Rostedt, Jarkko Sakkinen, Michal
Kubecek, Marco Elver, Al Viro, Keith Busch, Johannes Berg, Jan Kara,
David Sterba, Connor Kuehl, Andy Lutomirski, Andrew Lunn, Alexandre
Belloni, Peter Zijlstra, Russell King, Eric W. Biederman, Willy
Tarreau, Christoph Hellwig, Emilio Cobos Álvarez, Christian Poveda,
Mark Rousskov, John Ericson, TennyZhuang, Xuanwo, Daniel Paoliello,
Manish Goregaokar, comex, Josh Stone, Stephan Sokolow, Philipp Krones,
Guillaume Gomez, Joshua Nelson, Mats Larsen, Marc Poulhiès, Samantha
Miller, Esteban Blanc, Martin Schmidt, Martin Rodriguez Reboredo,
Daniel Xu, Viresh Kumar, Bartosz Golaszewski, Vegard Nossum, Milan
Landaverde, Dariusz Sosnowski, Yuki Okushi, Matthew Bakhtiari, Wu
XiangCheng, Tiago Lam, Boris-Chengbiao Zhou, Sumera Priyadarsini,
Viktor Garske, Niklas Mohrin, Nándor István Krácser, Morgan Bartlett,
Miguel Cano, Léo Lanteri Thauvin, Julian Merkle, Andreas Reindl,
Jiapeng Chong, Fox Chen, Douglas Su, Antonio Terceiro, SeongJae Park,
Sergio González Collado, Ngo Iok Ui (Wu Yu Wei), Joshua Abraham,
Milan, Daniel Kolsoi, ahomescu, Manas, Luis Gerhorst, Li Hongyu,
Philipp Gesang, Russell Currey, Jalil David Salamé Messina, Jon Olson,
Raghvender, Angelos, Kaviraj Kanagaraj, Paul Römer, Sladyn Nunes,
Mauro Baladés, Hsiang-Cheng Yang, Abhik Jain, Hongyu Li, Sean Nash,
Yuheng Su, Peng Hao, Anhad Singh, Roel Kluin, Sara Saa, Geert
Stappers, Garrett LeSage, IFo Hancroft, and Linus Torvalds"
We've added 10 non-merge commits during the last 23 day(s) which contain
a total of 14 files changed, 130 insertions(+), 69 deletions(-).
The main changes are:
1) Fix dynptr helper API to gate behind CAP_BPF given it was not intended
for unprivileged BPF programs, from Kumar Kartikeya Dwivedi.
2) Fix need_wakeup flag inheritance from umem buffer pool for shared xsk
sockets, from Jalal Mostafa.
3) Fix truncated last_member_type_id in btf_struct_resolve() which had a
wrong storage type, from Lorenz Bauer.
4) Fix xsk back-pressure mechanism on tx when amount of produced
descriptors to CQ is lower than what was grabbed from xsk tx ring,
from Maciej Fijalkowski.
5) Fix wrong cgroup attach flags being displayed to effective progs,
from Pu Lehui.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Inherit need_wakeup flag for shared sockets
bpf: Gate dynptr API behind CAP_BPF
selftests/bpf: Adapt cgroup effective query uapi change
bpftool: Fix wrong cgroup attach flags being assigned to effective progs
bpf, cgroup: Reject prog_attach_flags array when effective query
bpf: Ensure correct locking around vulnerable function find_vpid()
bpf: btf: fix truncated last_member_type_id in btf_struct_resolve
selftests/xsk: Add missing close() on netns fd
xsk: Fix backpressure mechanism on Tx
MAINTAINERS: Add include/linux/tnum.h to BPF CORE
====================
Linus Torvalds [Mon, 3 Oct 2022 22:33:38 +0000 (15:33 -0700)]
Merge tag 'thermal-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The most significant part of this update is the thermal control DT
initialization rework from Daniel Lezcano and the following conversion
of drivers to use the new API introduced by it
Apart from that, the maximum number of trip points in a thermal zone
is increased and there are some fixes and code cleanups
Specifics:
- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when KASAN is enabled as it detects use after free
when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already shown in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Do not lock thermal zone mutex in the user space governor (Rafael
Wysocki)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)
- Increase maximum number of trip points in the thermal core (Sumeet
Pawnikar)
- Replace strlcpy() with unused retval with strscpy() in the core
thermal control code (Wolfram Sang)
- Use module_pci_driver() macro in the int340x processor_thermal
driver (Shang XiaoJing)
- Use get_cpu() instead of smp_processor_id() in the intel_powerclamp
thermal driver to prevent it from crashing and remove unused
accounting for IRQ wakes from it (Srinivas Pandruvada)
- Consolidate priv->data_vault checks in int340x_thermal (Rafael
Wysocki)
- Check the policy first in cpufreq_cooling_register() (Xuewen Yan)
- Drop redundant error message from da9062-thermal (zhaoxiao)
- Drop of_match_ptr() from thermal_mmio (Jean Delvare)"
* tag 'thermal-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
thermal: core: Increase maximum number of trip points
thermal: int340x: processor_thermal: Use module_pci_driver() macro
thermal: intel_powerclamp: Remove accounting for IRQ wakes
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
thermal: int340x_thermal: Consolidate priv->data_vault checks
thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()
thermal: Drop duplicate words from comments
thermal: move from strlcpy() with unused retval to strscpy()
thermal: da9062-thermal: Drop redundant error message
thermal/drivers/thermal_mmio: Drop of_match_ptr()
thermal: gov_user_space: Do not lock thermal zone mutex
Revert "mlxsw: core: Add the hottest thermal zone detection"
thermal/core: Fix lockdep_assert() warning
thermal/core: Move the mutex inside the thermal_zone_device_update() function
thermal/core: Move the thermal zone lock out of the governors
thermal/governors: Group the thermal zone lock inside the throttle function
thermal/core: Rework the monitoring a bit
thermal/core: Rearm the monitoring only one time
thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()
thermal/of: Remove old OF code
...
Linus Torvalds [Mon, 3 Oct 2022 20:26:47 +0000 (13:26 -0700)]
Merge tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add support for some new hardware, extend the existing hardware
support, fix some issues and clean up code
Specifics:
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
Smythies)
- Update the AMD P-state driver (Perry Yuan):
- Fix wrong lowest perf fetch
- Map desired perf into pstate scope for powersave governor
- Update pstate frequency transition delay time
- Fix initial highest_perf value
- Clean up
- Move max CPU capacity to sugov_policy in the schedutil cpufreq
governor (Lukasz Luba)
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski)
- Add support for Tegra239 and minor cleanups (Sumit Gupta, ye
xingchen, and Yang Yingliang)
- Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen
Yan, and Viresh Kumar)
- Minor cleanups around functions called at module_init() (Xiu
Jianfeng)
- Use module_init and add module_exit for bmips driver (Zhang
Jianhua)
- Add AlderLake-N support to intel_idle (Zhang Rui)
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang)
- Remove redundant check from cpuidle_switch_governor() (Yu Liao)
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang)
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang)
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki)
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello)
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang)
- Update the intel_rapl power capping driver:
- Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
- Add support for RAPTORLAKE_S (Zhang Rui).
- Fix UBSAN shift-out-of-bounds issue (Chao Qin)
- Handle -EPROBE_DEFER when regulator is not probed on
mtk-ci-devfreq.c (AngeloGioacchino Del Regno)
- Fix message typo and use dev_err_probe() in rockchip-dfi.c
(Christophe JAILLET)"
* tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
cpufreq: Add __init annotation to module init funcs
cpufreq: tegra194: change tegra239_cpufreq_soc to static
PM / devfreq: rockchip-dfi: Fix an error message
PM / devfreq: mtk-cci: Handle sram regulator probe deferral
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
intel_idle: Add AlderLake-N support
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
cpufreq: tegra194: Add support for Tegra239
cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
powercap: intel_rapl: Add support for RAPTORLAKE_S
cpufreq: amd-pstate: Fix initial highest_perf value
cpuidle: Remove redundant check in cpuidle_switch_governor()
PM: wakeup: Add extra debugging statement for multiple active IRQs
cpufreq: tegra194: Remove the unneeded result variable
PM: suspend: move from strlcpy() with unused retval to strscpy()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
...
Linus Torvalds [Mon, 3 Oct 2022 20:19:53 +0000 (13:19 -0700)]
Merge tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"ACPI and PNP updates for 6.1-rc1.
These rearrange the ACPI device object initialization code (to get rid
of a redundant parent pointer from struct acpi_device among other
things), unify the _UID handling, drop support for some _OSI strings
that should not be necessary any more, add new IDs to support more
hardware and some more quirks, fix a few issues and clean up code all
over.
Specifics:
- Reimplement acpi_get_pci_dev() using the list of physical devices
associated with the given ACPI device object (Rafael Wysocki)
- Drop parent field from struct acpi_device (Rafael Wysocki)
- Extend the the int3472-tps68470 driver to support multiple
consumers of a single TPS68470 along with the requisite
framework-level support (Daniel Scally)
- Filter out non-memory resources in is_memory(), add a helper
function to find all memory type resources of an ACPI device object
and use that function in 3 places (Heikki Krogerus)
- Add IRQ override quirks for Asus Vivobook K3402ZA/K3502ZA and ASUS
model S5402ZA (Tamim Khan, Kellen Renshaw)
- Fix up suspend-to-idle support on ASUS Rembrandt laptops (Mario
Limonciello)
- Clean up ACPI platform devices support code (Andy Shevchenko, John
Garry)
- Clean up ACPI bus management code (Andy Shevchenko, ye xingchen)
- Add support for multiple DMA windows with different offsets to the
ACPI device enumeration code and use it on LoongArch (Jianmin Lv)
- Clean up the ACPI LPSS (Intel SoC) driver (Andy Shevchenko)
- Add a quirk for Dell Inspiron 14 2-in-1 for StorageD3Enable (Mario
Limonciello)
- Drop unused dev_fmt() and redundant 'HMAT' prefix from the HMAT
parsing code (Liu Shixin)
- Make ACPI FPDT parsing code avoid calling acpi_os_map_memory() on
invalid physical addresses (Hans de Goede)
- Silence missing-declarations warning related to Apple device
properties management (Lukas Wunner)
- Disable frequency invariance in the CPPC library if registers used
by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton)
- Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan)
- Fix Tx acknowledge in the PCC address space handler (Huisong Li)
- Use wait_for_completion_timeout() for PCC mailbox operations
(Huisong Li)
- Release resources on PCC address space setup failure path (Rafael
Mendonca)
- Remove unneeded result variables from APEI code (ye xingchen)
- Print total number of records found during BERT log parsing (Dmitry
Monakhov)
- Drop support for 3 _OSI strings that should not be necessary any
more and update documentation on custom _OSI strings so that adding
new ones is not encouraged any more (Mario Limonciello)
- Drop unneeded result variable from ec_write() (ye xingchen)
- Remove the leftover struct acpi_ac_bl from the ACPI AC driver
(Hanjun Guo)
- Reorder symbols to get rid of a few forward declarations in the
ACPI fan driver (Uwe Kleine-König)
- Add ARM DMA-330 controller to the supported list in the ACPI AMBA
driver (Vijayenthiran Subramaniam)
- Drop references to non-functional 01.org/linux-acpi web site from
MAINTAINERS and Kconfig help texts (Rafael Wysocki)
- Replace strlcpy() with unused retval with strscpy() in the ACPI
support code (Wolfram Sang)
- Do not initialize ret in main() in the pfrut utility (Shi junming)
- Drop useless ACPI DSDT override documentation (Rafael Wysocki)
- Fix a few typos and wording mistakes in the ACPI device enumeration
documentation (Jean Delvare)
- Introduce acpi_dev_uid_to_integer() to convert a _UID string into
an integer value (Andy Shevchenko)
- Use acpi_dev_uid_to_integer() in several places to unify _UID
handling (Andy Shevchenko)
- Drop unused pnpid32_to_pnpid() declaration from PNP code (Gaosheng
Cui)"
* tag 'acpi-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (79 commits)
ACPI: LPSS: Deduplicate skipping device in acpi_lpss_create_device()
ACPI: LPSS: Replace loop with first entry retrieval
ACPI: x86: s2idle: Add another ID to s2idle_dmi_table
ACPI: x86: s2idle: Fix a NULL pointer dereference
MAINTAINERS: Drop records pointing to 01.org/linux-acpi
ACPI: Kconfig: Drop link to https://01.org/linux-acpi
ACPI: docs: Drop useless DSDT override documentation
ACPI: DPTF: Drop stale link from Kconfig help
ACPI: x86: s2idle: Add a quirk for ASUSTeK COMPUTER INC. ROG Flow X13
ACPI: x86: s2idle: Add a quirk for Lenovo Slim 7 Pro 14ARH7
ACPI: x86: s2idle: Add a quirk for ASUS ROG Zephyrus G14
ACPI: x86: s2idle: Add a quirk for ASUS TUF Gaming A17 FA707RE
ACPI: x86: s2idle: Add module parameter to prefer Microsoft GUID
ACPI: x86: s2idle: If a new AMD _HID is missing assume Rembrandt
ACPI: x86: s2idle: Move _HID handling for AMD systems into structures
platform/x86: int3472: Add board data for Surface Go2 IR camera
platform/x86: int3472: Support multiple gpio lookups in board data
platform/x86: int3472: Support multiple clock consumers
ACPI: bus: Add iterator for dependent devices
ACPI: scan: Add acpi_dev_get_next_consumer_dev()
...
We've added 143 non-merge commits during the last 27 day(s) which contain
a total of 151 files changed, 8321 insertions(+), 1402 deletions(-).
The main changes are:
1) Add kfuncs for PKCS#7 signature verification from BPF programs, from Roberto Sassu.
2) Add support for struct-based arguments for trampoline based BPF programs,
from Yonghong Song.
3) Fix entry IP for kprobe-multi and trampoline probes under IBT enabled, from Jiri Olsa.
4) Batch of improvements to veristat selftest tool in particular to add CSV output,
a comparison mode for CSV outputs and filtering, from Andrii Nakryiko.
5) Add preparatory changes needed for the BPF core for upcoming BPF HID support,
from Benjamin Tissoires.
6) Support for direct writes to nf_conn's mark field from tc and XDP BPF program
types, from Daniel Xu.
7) Initial batch of documentation improvements for BPF insn set spec, from Dave Thaler.
8) Add a new BPF_MAP_TYPE_USER_RINGBUF map which provides single-user-space-producer /
single-kernel-consumer semantics for BPF ring buffer, from David Vernet.
9) Follow-up fixes to BPF allocator under RT to always use raw spinlock for the BPF
hashtab's bucket lock, from Hou Tao.
10) Allow creating an iterator that loops through only the resources of one
task/thread instead of all, from Kui-Feng Lee.
11) Add support for kptrs in the per-CPU arraymap, from Kumar Kartikeya Dwivedi.
12) Add a new kfunc helper for nf to set src/dst NAT IP/port in a newly allocated CT
entry which is not yet inserted, from Lorenzo Bianconi.
13) Remove invalid recursion check for struct_ops for TCP congestion control BPF
programs, from Martin KaFai Lau.
14) Fix W^X issue with BPF trampoline and BPF dispatcher, from Song Liu.
15) Fix percpu_counter leakage in BPF hashtab allocation error path, from Tetsuo Handa.
16) Various cleanups in BPF selftests to use preferred ASSERT_* macros, from Wang Yufen.
17) Add invocation for cgroup/connect{4,6} BPF programs for ICMP pings, from YiFei Zhu.
18) Lift blinding decision under bpf_jit_harden = 1 to bpf_capable(), from Yauheni Kaliuta.
19) Various libbpf fixes and cleanups including a libbpf NULL pointer deref, from Xin Liu.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (143 commits)
net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c
Documentation: bpf: Add implementation notes documentations to table of contents
bpf, docs: Delete misformatted table.
selftests/xsk: Fix double free
bpftool: Fix error message of strerror
libbpf: Fix overrun in netlink attribute iteration
selftests/bpf: Fix spelling mistake "unpriviledged" -> "unprivileged"
samples/bpf: Fix typo in xdp_router_ipv4 sample
bpftool: Remove unused struct event_ring_info
bpftool: Remove unused struct btf_attach_point
bpf, docs: Add TOC and fix formatting.
bpf, docs: Add Clang note about BPF_ALU
bpf, docs: Move Clang notes to a separate file
bpf, docs: Linux byteswap note
bpf, docs: Move legacy packet instructions to a separate file
selftests/bpf: Check -EBUSY for the recurred bpf_setsockopt(TCP_CONGESTION)
bpf: tcp: Stop bpf_setsockopt(TCP_CONGESTION) in init ops to recur itself
bpf: Refactor bpf_setsockopt(TCP_CONGESTION) handling into another function
bpf: Move the "cdg" tcp-cc check to the common sol_tcp_sockopt()
bpf: Add __bpf_prog_{enter,exit}_struct_ops for struct_ops trampoline
...
====================
Merge branches 'thermal-intel' and 'thermal-drivers'
Merge thermal control driver changes for 6.1-rc1:
- Use module_pci_driver() macro in the int340x processor_thermal
driver (Shang XiaoJing).
- Use get_cpu() instead of smp_processor_id() in the intel_powerclamp
thermal driver to prevent it from crashing and remove unused
accounting for IRQ wakes from it (Srinivas Pandruvada).
- Consolidate priv->data_vault checks in int340x_thermal (Rafael
Wysocki).
- Check the policy first in cpufreq_cooling_register() (Xuewen Yan).
- Drop redundant error message from da9062-thermal (zhaoxiao).
- Drop of_match_ptr() from thermal_mmio (Jean Delvare).
* thermal-intel:
thermal: int340x: processor_thermal: Use module_pci_driver() macro
thermal: intel_powerclamp: Remove accounting for IRQ wakes
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
thermal: int340x_thermal: Consolidate priv->data_vault checks
* thermal-drivers:
thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()
thermal: da9062-thermal: Drop redundant error message
thermal/drivers/thermal_mmio: Drop of_match_ptr()
- Increase maximum number of trip points in the thermal core (Sumeet
Pawnikar).
- Replace strlcpy() with unused retval with strscpy() in the core
thermal control code (Wolfram Sang).
- Do not lock thermal zone mutex in the user space governor (Rafael
Wysocki)
- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when KASAN is enabled as it detects use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)
* thermal-core: (47 commits)
thermal: core: Increase maximum number of trip points
thermal: move from strlcpy() with unused retval to strscpy()
thermal: gov_user_space: Do not lock thermal zone mutex
Revert "mlxsw: core: Add the hottest thermal zone detection"
thermal/core: Fix lockdep_assert() warning
thermal/core: Move the mutex inside the thermal_zone_device_update() function
thermal/core: Move the thermal zone lock out of the governors
thermal/governors: Group the thermal zone lock inside the throttle function
thermal/core: Rework the monitoring a bit
thermal/core: Rearm the monitoring only one time
thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()
thermal/of: Remove old OF code
thermal/core: Move set_trip_temp ops to the sysfs code
thermal/drivers/samsung: Switch to new of thermal API
regulator/drivers/max8976: Switch to new of thermal API
Input: sun4i-ts - switch to new of thermal API
iio/drivers/sun4i_gpadc: Switch to new of thermal API
hwmon/drivers/core: Switch to new of thermal API
hwmon: pm_bus: core: Switch to new of thermal API
ata/drivers/ahci_imx: Switch to new of thermal API
...
Merge branches 'pm-cpuidle', 'pm-core', 'pm-sleep' and 'powercap'
Merge cpuidle changes, PM core changes and power capping changes for
6.1-rc1:
- Add AlderLake-N support to intel_idle (Zhang Rui).
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang).
- Remove redundant check from cpuidle_switch_governor() (Yu Liao).
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang).
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang).
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki).
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello).
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang).
- Update the intel_rapl power capping driver:
* Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
* Add support for RAPTORLAKE_S (Zhang Rui).
* Fix UBSAN shift-out-of-bounds issue (Chao Qin).
* pm-cpuidle:
intel_idle: Add AlderLake-N support
cpuidle: Remove redundant check in cpuidle_switch_governor()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
cpuidle: coupled: Drop duplicate word from a comment
* pm-core:
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
* pm-sleep:
PM: wakeup: Add extra debugging statement for multiple active IRQs
PM: suspend: move from strlcpy() with unused retval to strscpy()
* powercap:
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
powercap: intel_rapl: Add support for RAPTORLAKE_S
projects / kernel.git / log