drm/amd/display: force CP to DESIRED when removing display

[WHY]
- Commit from userspace could cause link stream to disable and hdcp
auth to reset when the HDCP has already been enabled at the moment.
CP should fall back to DESIRED from ENABLED in such cases.
- This change was previously reverted due to a regression caused, which
has now been cleared.

[HOW]
In hdcp display removal, change CP to DESIRED if at the moment CP
is ENABLED before the auth reset and removal of linked list element.

Signed-off-by: Dingchen (David) Zhang <dingchen.zhang@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Updates for ODM Transition Test

[Why]
There is an assert in cases where transition from ODM 2:1
to ODM 1:1 (bypass)

[How]
Remove assert since this case is now valid.
Update diags tests for ODM transitions.

Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "Disconnect non-DP with no EDID"

[Why]
Found a use case (IPKVM) that DP-VGA active dongle does
not return any EDID and the mentioned commit broke it.

[How]
This reverts "Disconnect non-DP with no EDID"

Signed-off-by: Roy Chan <roy.chan@amd.com>
Reviewed-by: Chris Park <Chris.Park@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debugfs entry for dsc passthrough

[Why & How]
Add debugfs entry to force dsc decoding at PCON when DSC capable
external RX is connected. In such case, it is free to test DSC
decoding at external RX or at PCON.

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix crash during MPO + ODM combine mode recalculation

[Why]
When calculating recout width for an MPO plane on a mode that's using
ODM combine, driver can calculate a negative value, resulting in a
crash.

[How]
For negative widths, use zero such that validation will prune the
configuration correctly and disallow MPO.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix off-by-one error in DML

[WHY]
For DCN30 and later, there is no data in DML arrays indexed by state at
index num_states.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Set DISPCLK_MAX_ERRDET_CYCLES to 7

[WHY]
DISPCLK_MAX_ERRDET_CYCLES must be 7 to prevent connection loss when
changing DENTIST_DISPCLK_WDIVIDER from 126 to 127 and back.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add interface for ADD & DROP PIXEL Registers

[WHY]
HW has handed down a new sequence that requires access to these
registers.

v2: squash in DCN3.1 fixes (Alex)

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add Interface to set FIFO ERRDET SW Override

[WHY]
HW has handed down a new sequence which requires access to the FIFO
ERRDET SW Override register.

Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.138

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.68

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change default policy for MPO with multidisplay

[Why]
Rearranging pipes with multiple displays and multiple planes cannot be
done atomically and requires a much improved sequence to deal with it.

[How]
To workaround such issues, prefer avoid pipe-split policy for
multidisplay scenarios.

Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Release MST resources on switch from MST to SST

[why]
When OS overrides training link training parameters
for MST device to SST mode, MST resources are not
released and leak of the resource may result crash and
incorrect MST discovery during following hot plugs.

[how]
Retaining sink object to be reused by SST link and
releasing MST  resources.

Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enable PSR Residency for multiple panels

[why]
Allow specifying which panel to take PSR Residency
measurements from.
[how]
Pass panel instance to DMUB through GPINT in the upper
8 bits of the parameter.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Return last used DRR VTOTAL from DC

[How]
Add call to get the last used VTOTAL from DC

Signed-off-by: Jayendran Ramani <Jayendran.Ramani@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove unused definition of DMUB SET_CONFIG

[Why & How]
SET_CONFIG transactions with DMUB is not used and removed.

Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Update scaling settings on modeset

[Why]
We update scaling settings when scaling mode has been changed.
However when changing mode from native resolution the scaling mode previously
set gets ignored.

[How]
Perform scaling settings update on modeset.

Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Support mappable encoders when transmitting training patterns.

[Why & How]
Add support for transmitting training pattern sequences for links whose
encoders have been dynamically assigned.

Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Expand DP module equalization API.

[Why & How]
Add functionality useful for DP equalization phase of link training to
public interface.

Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "Fix clock table filling logic"

[Why]
This change was found to break some high-refresh modes. Reverting
to unblock mainline.

Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Reviewed-by: Sung Lee <Sung.Lee@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add visual confirm colors to differentiate layer_index > 0

[WHY]
Currently there is no way to visually identify if there is one or more
layers presented fullscreen on the display

[HOW]
Add new visual confirm colors in get_surface_visual_confirm_color for
planes with layer_index > 0

Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor visual confirm

[Why + How]
Visual confirm has no asic-specific logic,
so we can refactor and unify these functions
that are currently spread out across multiple
dcn files.
Add a new hw sequencer interface update_visual_confirm_color,
and a new mpc function pointer set_bg_color.
This will allow visual confirm to updated independently
of MPCC blending updates.

v2: squash in DCN3.1 fixes

Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Control power gating by driver.

[Why]
This disablement would be specific for Nav10 and shouldn’t be propagated to the other programs.

[How]
Power gating is controlled by driver.

Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DCN 3.01 DSCCLK validation

[why]
DSCCLK validation is not necessary because DSCCLK is derrived from
DISPCLK, therefore if DISPCLK validation passes, DSCCLK is valid, too.
Doing DSCLK validation in addition to DISPCLK leads to modes being
wrongly rejected when DSCCLK was incorrectly set outside of DML.

[how]
Remove DSCCLK validation because it's implicitly validated under DISPCLK

Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: delay 100ms before restart after failing to read CP_IRQ

[why]
Some DPRX will issue CP_IRQ when user disconnects a display
that has been authenticated.
Since display is being disconnecting dpcd read will fail.
This will cause us to attempt HDCP retry on disconnection.
We are adding a 100ms delay before retry.
So we will only start retry if within 100ms there is no disconnection call
to HDCP module.

Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enabling PSR support for multiple panels

[why]
Updating PSR interfaces to allow PSR enablement
per eDP panel.
[how]
- Copying PSR command structures to DC
- Changing function interfaces to pass panel instance
- Communicating with DMUB per link instead of assuming
to use a single one
-Iterating through all PSR capable panels when enabling/disabling
all

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Trigger full update after DCC on/off

[Why]
During DCC on/off, stutter period is calculated before DCC has fully transitioned.
This results in incorrect stutter period calculation.

[How]
Trigger a full update when DCC changes between on/off.

Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allocate psp fw private buffer from VRAM for sriov vf

psp added new feature to check fw buffer address for sriov vf. the
address range must be in vf fb.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add psp ta microcode init for aldebaran sriov vf

need to load xgmi ta for aldebaran sriov vf.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove sriov vf mmhub system aperture and fb location programming

host driver programmed mmhub system aperture and fb location for vf, no
need to program in guest side.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove sriov vf gfxhub fb location programming

host driver programmed the gfxhub fb location for vf, no need to
program in guest side.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove sriov vf checking from getting fb location

host driver programmed fb location registers for vf, no need to
check anymore.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix warning reported by kernel test robot

Kernel test robot throws warning ->

>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:483:2:
   warning: variable 'member_type' is used uninitialized whenever switch
   default is taken [-Wsometimes-uninitialized]
       default:
       ^~~~~~~
   drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:487:47:
   note: uninitialized use occurs here
       return yellow_carp_get_smu_metrics_data(smu, member_type, value);
                               ^~~~~~~~~~~
   drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:465:2:
   note: variable 'member_type' is declared here
       MetricsMember_t member_type;
       ^
   1 warning generated.

Fix this warning by return errno when the clk type is unsupported.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix shadow bo skip condition

Create shadow BOs only for no-compute VM context and only for dGPU.
The existing if-condition would create shadow bo for compute context
on dGPU which not what we wanted.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: add kernel documentation for smu_get_power_limit

 added doc tag "amdgpu_pp_power" with description
 added tags for enums  pp_power_limit_level, pp_power_type
 added tag for function smu_get_power_limit

Test:
* Temporary insertion into Documentation/gpu/amdgpu.rst
------------START------------
Power Limit
-----------
.. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h
   :doc: amdgpu_pp_power

.. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h
   :identifiers: pp_power_limit_level

.. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h
   :identifiers: pp_power_type

.. kernel-doc:: drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
   :identifiers: smu_get_power_limit
-------------END-------------

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: handle return value for get_power_limit

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: modify and add smu_get_power_limit to Powerplay API

 modify args of smu_get_power_limit to match Powerplay API .get_power_limit
 add smu_get_power_limit to Powerplay API swsmu_pm_funcs
 remove special handling of smu in amdgpu_hwmon_show_power_cap*

* Test
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display" ; \
 echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ;           \
 echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ;   \
 echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: modify Powerplay API get_power_limit to use new pp_power enums

 updated {amd_pm_funcs}->get_power_limit() signature
 rewrote pp_get_power_limit to use new enums
 pp_get_power_limit now returns -EOPNOTSUPP for unknown power limit
 update calls to {amd_pm_funcs}->get_power_limit()

* Test Notes
* testing hardware was NAVI10 (tests SMU path)
** needs testing on VANGOGH
** needs testing on SMU < 11
** ie, one of
 TOPAZ, FIJI, TONGA, POLARIS10, POLARIS11, POLARIS12, VEGAM, CARRIZO,
 STONEY, VEGA10, VEGA12,VEGA20, RAVEN, BONAIRE, HAWAII

* Test
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display" ; \
 echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ;           \
 echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ;   \
 echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: clean up smu_get_power_limit function signature

 add two new powerplay enums (limit_level, type)
 add enums to smu_get_power_limit signature
 remove input bitfield stuffing of output variable limit
 update calls to smu_get_power_limit

* Test
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display" ; \
 echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ;           \
 echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ;   \
 echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

amdgpu/pm: reorder definition of swsmu_pm_funcs for readability

Match the order of definition to the structure's declaration to
help with locating included and missing functions of the API

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix two spelling mistakes, clean wide lines

There are two spelling mistakes in dml_print messages, fix these and
clear up checkpatch warning on overly wide line length.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a a typo in a comment

s/than/then/

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix duplicate included dce110_hw_sequencer.h

Clean up the following includecheck warning:

./drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c:
dce110_hw_sequencer.h is included more than once.

No functional change.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: remove no need variable

remove no need variable, just return the DC_OK

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix warning of Function parameter or member not described

Add the parameter table_freed description on function description.

Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: remove duplicate include of kfd_svm.h

kfd_svm.h is included duplicately in commit 42de677f79999
("drm/amdkfd: register svm range").

After checking possible related header files,
remove the former one to make the code format more reasonable.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix VM handling for GART allocations

For GTT allocations with a GART address the res contains the VMID0
addresses and can't be used for VM handling.

So ignore the res when the pages array is given or we fill the page
tables with nonsense.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fixing "Indirect register access for Navi12 sriov" for vega10

The NV12 and VEGA10 share the same interface W/RREG32_SOC15*,
the callback functions in these macros may not be defined,
so NULL pointer must be checked but not in
macro __WREG32_SOC15_RLC__, fixing the lock of NULL pointer check.

Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update psp fw attestation support list

Disable support on APU

Reviewed-by: Changfeng <Changfeng.Zhu@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: add sdma poison consumption handling

Follow the same apporach as GFX to handle SDMA
poison consumption. Send SIGBUS to application
when receives SDMA_ECC interrupt and issue gpu
reset either mode 2 or mode 1 to get the engine
back

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Dennis Li<dennis.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: pages_addr offset must be 0 for system range

prange->offset is for VRAM range mm_nodes, if multiple ranges share same
mm_nodes, migrate range back to VRAM will reuse the VRAM at offset of
the same mm_nodes. For system memory pages_addr array, the offset is
always 0, otherwise, update GPU mapping will use incorrect system memory
page, and cause system memory corruption.

Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Modify register access in sdma_v5_2 to use _SOC15 macros

In SRIOV environment, KMD should access SDMA registers
through RLCG if GC indirect access flag enabled.

Using _SOC15 read/write macros ensures that they go
through RLC when the flag is enabled.

Signed-off-by: Rohit Khaire <rohit.khaire@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc: fix DCN3.1 FP handling

Missing proper DC_FP_START/DC_FP_END.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/dc: fix DCN3.1 Makefile for PPC64

Port the necessary changes from previous DCN versions.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add DC support and display block for Yellow Carp

To enable output on real display instead of virtual.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DC DCN3.1 support to Kconfig

To enable compiling and using DCN3.1 ASICs with physical output.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 Yellow Carp support to DM

To detect DCN3.1 ASICs and to enable the appropriate number of CRTCs,
pick the right validation paths for display formats and to use the
right DC interfaces.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 blocks to the DC Makefile

Preparation for compiling DCN3.1 support.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 Resource

Container for hardware resources and blocks for DCN3.1, also adds
new DC debug flags used with DCN3.1.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add z10 restore checks for DC interfaces

DMCUB has a deferred z10 restore process that needs signalling from
driver to occur. This needs to be done on any interface that programs
the hardware state or sequences where we expect to have the same
hardware state as before.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 HWSEQ

Add DCN3.1 specific hardware sequence programming - extending off of
our existing DCN3/DCN2 support.

Extend stream hardware sequencing to include new DCCG programming.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 BIOS parser support

Updated interfaces for multiple eDP backlight caps.
Added support for interpreting the new BIOS command tables on DCN3.1.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 HDCP support

New DTM interface is V3 and we need to extend our existing support
to enable HDCP on DCN3.1.

Version the helpers and fallback to the older versions on failure
in the new interfaces.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 PANEL

The PANEL block handles embedded panel power and backlight programming.

This programming and sequencing is now owned by DMCUB and driver will
call into the interface for backlight status and programming.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 DMCUB

DMCU-B (Display Micro-Controller Unit B) is a display microcontroller
used for shared display functionality with BIOS and for advanced
power saving display features.

Extends the command header to include new DCN3.1 functionality.

Adds new interfaces to DC dmub interface as well for z-state support.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 GPIO support

Extends off of DCN3.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 IRQ manager

Add IRQ services for DCN3.1 to handle hardware generated interrupts.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 DML calculation support

DML (Display mode library) is used for calculating watermarks, bandwidth
and for validating display configurations.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 DCHHUB

Adds DCN3.1 DCHHUB programming and modifies DCN20/DCN30 shared
hardware sequencer helpers to use these hooks.

HW Blocks:

 +--------++------+       +----------+
 |DCHUBBUB|| HUBP |  <--  | MMHUBBUB |
 +--------++------+       +----------+
        |                      ^
        v                      |
    +--------+             +--------+
    |  DPP   | <---------> |  DWB   |
    +--------+             +--------+
        |                      ^
        v                      |
    +--------+                 |
    |  MPC   |                 |
    +--------+                 |
        |                      |
        v                      |
    +-------+                  |
    |  OPP  |                  |
    +-------+                  |
        |                      |
        v                      |
    +--------+                /
    |  OPTC  |  --------------
    +--------+
        |
        v
    +--------+       +--------+
    |  DIO   |       |  DCCG  |
    +--------+       +--------+

No changes to MMHUBBUB or DWB programming, added to diagram for clarity.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 OPTC

Add support for programming the DCN3.1 OPTC (Output Timing Controller)

HW Blocks:

    +--------+
    |  MPC   |
    +--------+
        |
        v
    +-------+
    |  OPP  |
    +-------+
        |
        v
    +--------+
    |  OPTC  |
    +--------+
        |
        v
    +--------+       +--------+
    |  DIO   |       |  DCCG  |
    +--------+       +--------+

There are no changes to OPP or MPC for DCN3.1, so the diagram will
include them in this patch.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 DIO

Add support for the DIO (Display IO) block of DCN3.1 which controls
legacy HDMI/DP stream/link encoding.

HW Blocks:

    +--------+       +--------+
    |  DIO   |       |  DCCG  |
    +--------+       +--------+

Includes some updates to core logic for link encoder assignment and
future support for new high bandwidth output.

v2: squash in unused variable fix (Alex)

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 DCCG

Add programming of the DCCG (Display Controller Clock Generator) block:

HW Blocks:

    +--------+
    |  DCCG  |
    +--------+

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 clock manager support

Adds support for clock requests for the various parts of the DCN3.1 IP
and the interfaces and definitions for sending messages to SMU/PMFW.

Includes new support for z9/10, detecting SMU timeout and p-state
support enablement.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add DCN3.1 yellow carp asic family IDs

[Why & How]
To determine whether the chip is yellow carp or not and which revision
it is.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Update atomfirmware for DCN3.1 phy tuning and eDP caps

[Why & How]
We'll need these in driver for phy tuning in DCN3.1.

Multiple eDP support also requires understanding which LCD the backlight
curve in atombios is for.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add video_codecs query support for yellow carp

Add video_codecs query support for yellow carp.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: disable manually setting MCLK power level on yellow carp

PMFW provides specific messages for setting fclk freq range thus adjust
the power level. There's misusing of these messages when setting
dpm mclk. Since actually mclk could adjust automatically complying with
fclk, remove standalone support for mclk dpm level setting.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add mode2 reset support for yellow carp

This patch adds mode2 reset support for yellow carp.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add set_performance_level function for yellow carp

This patch enables editing sysfs file power_dpm_force_performance_level
for yellow carp. User could thus adjust the dpm forced level.

v2: enable fine grain control of GFXCLK only when in manual performance
level mode. In other mode, the min/max range of GFXCLK will be reset to
corresponding values.

Ex: To enable min 300MHz / max 600MHz gfx clocks

1) echo manual > /sys/bus/pci/devices/.../power_dpm_force_performance_level
2) echo s 0 300 > /sys/bus/pci/devices/.../pp_od_clk_voltage
3) echo s 1 600 > /sys/bus/pci/devices/.../pp_od_clk_voltage
4) echo c > /sys/bus/pci/devices/.../pp_od_clk_voltage

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: correct the cu and rb info for yellow carp

Skip disabled sa to correct the cu_info and active_rbs for yellow carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Suggested-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add gpu harvest support for yellow carp (v2)

Register callback in gfxhub functions to program the bypass groups in
gc_utcl2 corresponding to harvested SA.

v2: update comments (Alex)

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add the interface to dump smu metrics table for yellow carp

This patch is to add the interface to dump smu metrics table for yellow
carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add callbacks to read/write sysfs file pp_power_profile_mode

Implement the sysfs API for getting/setting pp_power_profile_mode for
yellow carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add callback get_dpm_ultimate_freq for yellow carp

Add callback function to get the hard frequency range of a clock domain
for yellow carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add callback to get bootup values for yellow carp

Add get_vbios_bootup_values function to get the bootup values for yellow
carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Load TA firmware for yellow carp

Add TA firmware to module firmware list for yellow carp and call
psp_init_ta_microcode to parse the TA firmware for HDCP support.

Cc: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add PrepareMp1ForUnload support for yellow carp

Driver needs to notify the PMFW when the RLC is disabled.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add callback force_clk_levels for yellow carp

Implement the sysfs API to set a range of allowed DPM levels for
specific clock domain.

v2: return error directly if the specified clock type not supported

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: initialize feature_enabled/feature_support bitmap for yellow carp

Initialize the feature_enabled and feature_supported bitmap for yellow
carp.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: implement is_dpm_running() callback for yellow carp

Implement function to check if DPM is running for yellow carp.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add feature map for yellow carp

Add feature map for yellow carp.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add support to get dpm clock value for yellow carp

Implement the sysfs API for getting values of pp dpm
clocks(pp_dpm_socclk/mclk/fclk/vclk/dclk) for yellow carp.

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add the fine grain tuning function for yellow carp

Use the pp_od_clk_voltage sysfs file to configure the min and max value
of gfx clock frequency or to restore the default values.

Command guide:
echo "s level value" > pp_od_clk_voltage
        "s" - set the sclk frequency
        "level" - 0 or 1, "0" represents the min value, "1" represents
        the max value
        "value" - the target value of sclk frequency, it should be
        limited in the safe range
echo "r" > pp_od_clk_voltage
        "r" - reset the sclk frequency, restore the default value
echo "c" > pp_od_clk_voltage
        "c" - commit the min and max value of sclk frequency to the
        system only after the commit command, the setting target values
        by "s" command will take effect

Example:
1) check the default sclk frequency
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:        600Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz
2) use "s" -- set command to configure the min or max sclk frequency
        $ echo "s 0 300" > pp_od_clk_voltage
        $ echo "s 1 500" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        300Mhz
        1:        500Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz
3) use "r" -- reset command to restore the min and max sclk frequency
        $ echo "r" > pp_od_clk_voltage
        $ echo "c" > pp_od_clk_voltage
        $ cat pp_od_clk_voltage
        OD_SCLK:
        0:        200Mhz
        1:        600Mhz
        OD_RANGE:
        SCLK:     200MHz       600MHz

v2: modify the description of reset command usage - need to do "commit"
    after set the restore command

Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add set_watermarks_table function for yellow carp

Add callback function set_watermarks_table for yellow carp.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add read_sensor function for yellow carp

Add callback function read_sensor for yellow carp.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add timestamp counter query support for yellow carp

Allows software to query HW counters to timestamp submissions.
This patch can address KFDPerfCountersTest.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: chen gong <curry.gong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add RLC_PG_DELAY_3 for yellow carp

RLC_PG_DELAY_3 is to make RLC in safe mode to
prevent any misalignment or conflict in middle of any power
feature entry/exit sequence when CGPG feature is enabled.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: support smu_post_init for yellow carp

Add smu_post_init support for yellow carp.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable VCN PG and CG for yellow carp

Enable VCN 3.0 PG and CG for Yellow Carp by setting up flags.

Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable vcn dpg mode on yellow carp

Enable vcn dpg mode on yellow carp.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>