dts: marvell: add CM3 SRAM memory to cp11x ethernet device tree
CM3 SRAM address space will be used for Flow Control configuration.
Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Juergen Gross [Thu, 11 Feb 2021 10:16:13 +0000 (11:16 +0100)]
xen/events: link interdomain events to associated xenbus device
In order to support the possibility of per-device event channel
settings (e.g. lateeoi spurious event thresholds) add a xenbus device
pointer to struct irq_info() and modify the related event channel
binding interfaces to take the pointer to the xenbus device as a
parameter instead of the domain id of the other side.
While at it remove the stale prototype of bind_evtchn_to_irq_lateeoi().
Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Wei Liu <wei.liu@kernel.org> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Juergen Gross [Thu, 11 Feb 2021 10:16:12 +0000 (11:16 +0100)]
xen/netback: fix spurious event detection for common event case
In case of a common event for rx and tx queue the event should be
regarded to be spurious if no rx and no tx requests are pending.
Unfortunately the condition for testing that is wrong causing to
decide a event being spurious if no rx OR no tx requests are
pending.
Fix that plus using local variables for rx/tx pending indicators in
order to split function calls and if condition.
Fixes: e8da978ea6770c ("xen/netback: use lateeoi irq binding") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Wei Liu <wl@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Thu, 11 Feb 2021 10:07:59 +0000 (12:07 +0200)]
net: fib_notifier: don't return positive values on fib registration
The function fib6_walk_continue() cannot return a positive value when
called from register_fib_notifier(), but ignoring causes static analyzer to
generate warnings in users of register_fib_notifier() that try to convert
returned error code to pointer with ERR_PTR(). Handle such case by
explicitly checking for positive error values and converting them to
-EINVAL in fib6_tables_dump().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 10 Feb 2021 23:57:03 +0000 (01:57 +0200)]
net: ipconfig: avoid use-after-free in ic_close_devs
Due to the fact that ic_dev->dev is kept open in ic_close_dev, I had
thought that ic_dev will not be freed either. But that is not the case,
but instead "everybody dies" when ipconfig cleans up, and just the
net_device behind ic_dev->dev remains allocated but not ic_dev itself.
This is a problem because in ic_close_devs, for every net device that
we're about to close, we compare it against the list of lower interfaces
of ic_dev, to figure out whether we should close it or not. But since
ic_dev itself is subject to freeing, this means that at some point in
the middle of the list of ipconfig interfaces, ic_dev will have been
freed, and we would be still attempting to iterate through its list of
lower interfaces while checking whether to bring down the remaining
ipconfig interfaces.
There are multiple ways to avoid the use-after-free: we could delay
freeing ic_dev until the very end (outside the while loop). Or an even
simpler one: we can observe that we don't need ic_dev when iterating
through its lowers, only ic_dev->dev, structure which isn't ever freed.
So, by keeping ic_dev->dev in a variable assigned prior to freeing
ic_dev, we can avoid all use-after-free issues.
Fixes: 47694a2c6b5d ("Revert "net: ipv4: handle DSA enabled master network devices"") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 10 Feb 2021 21:45:51 +0000 (22:45 +0100)]
r8169: disable detection of bogus xid's 308/388
Several years ago these two entries have been added, but it's not clear
why. There's no trace that there has ever been such a chip version, and
not even the r8101 vendor driver knows these id's. So let's disable
detection, and if nobody complains remove them completely later.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 22:28:21 +0000 (14:28 -0800)]
Merge branch 'bond-3ad-200g-400g'
Nikolay Aleksandrov says:
====================
bonding: 3ad: support for 200G/400G ports and more verbose warning
xk
We'd like to have proper 200G and 400G support with 3ad bond mode, so we
need to add new definitions for them in order to have separate oper keys,
aggregated bandwidth and proper operation (patches 01 and 02). In
patch 03 Ido changes the code to use pr_err_once instead of
pr_warn_once which would help future detection of unsupported speeds.
v2: patch 03: use pr_err_once instead of WARN_ONCE
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 10 Feb 2021 20:43:33 +0000 (22:43 +0200)]
bonding: 3ad: Print an error for unknown speeds
The bond driver needs to be patched to support new ethtool speeds.
Currently it emits a single warning [1] when it encounters an unknown
speed. As evident by the two previous patches, this is not explicit
enough. Instead, promote it to an error.
[1]
bond10: (slave swp1): unknown ethtool speed (200000) for port 1 (set it to 0)
v2:
* Use pr_err_once() instead of WARN_ONCE()
Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Patch 1: Add net poll controller support to transmit kernel printks
over UDP
Patch 2: QLogic card support multiple queues and each queue can be
configured with respective coalescing parameters, this patch
add per queue rx-usecs, tx-usecs coalescing parameters
Patch 3: set default per queue rx-usecs, tx-usecs coalescing parameters and
preserve coalesce parameters across interface up and down
v3: fixed warnings reported by Dan Carpenter
v2: comments from jakub
- p1: remove poll_controller ndo and add budget 0 support in qede_poll
- p3: preserve coalesce parameters across interface up and down
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bhaskar Upadhaya [Wed, 10 Feb 2021 20:28:31 +0000 (12:28 -0800)]
qede: preserve per queue stats across up/down of interface
Here we do the initialization of coalescing values on load.
per queue coalesce values are also restored across up/down of
ethernet interface.
Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bhaskar Upadhaya [Wed, 10 Feb 2021 20:28:30 +0000 (12:28 -0800)]
qede: add per queue coalesce support for qede driver
per queue coalescing allows better and more finegrained control
over interrupt rates.
Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Bhaskar Upadhaya [Wed, 10 Feb 2021 20:28:29 +0000 (12:28 -0800)]
qede: add netpoll support for qede driver
handle netpoll case when qede_poll is called by
netpoll layer with budget 0
Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, a random stack value is being returned because variable
_ret_ is not properly initialized. This variable is actually not
used anymore and it should be removed.
Fix this by removing all instances of variable ret and return 0.
Fixes: 2bfe70dd4804 ("net: hns3: remove redundant return value of hns3_uninit_all_ring()")
Addresses-Coverity-ID: 1501700 ("Uninitialized scalar variable") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
plat_dat is initialized by stmmac_probe_config_dt().
So, initialization is not required by priv->plat.
This removes unnecessary initialization and variables.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 10 Feb 2021 14:41:44 +0000 (06:41 -0800)]
net: initialize net->net_cookie at netns setup
It is simpler to make net->net_cookie a plain u64
written once in setup_net() instead of looping
and using atomic64 helpers.
Lorenz Bauer wants to add SO_NETNS_COOKIE socket option
and this patch would makes his patch series simpler.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Lorenz Bauer <lmb@cloudflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 10 Feb 2021 14:33:20 +0000 (15:33 +0100)]
r8169: re-configure WOL settings on resume from hibernation
So far we don't re-configure WOL-related register bits when waking up
from hibernation. I'm not aware of any problem reports, but better
play safe and call __rtl8169_set_wol() in the resume() path too.
To achieve this move calling __rtl8169_set_wol() to
rtl8169_net_resume() and rename the function to rtl8169_runtime_resume().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 21:53:26 +0000 (13:53 -0800)]
Merge branch 'phy-icplus-next'
Michael Walle says:
====================
net: phy: icplus: cleanups and new features
Cleanup the PHY drivers for IPplus devices and add PHY counters and MDIX
support for the IP101A/G.
Patch 5 adds a model detection based on the behavior of the PHY.
Unfortunately, the IP101A shares the PHY ID with the IP101G. But the latter
provides more features. Try to detect the newer model by accessing the page
selection register. If it is writeable, it is assumed, that it is a IP101G.
With this detection in place, we can now access registers >= 16 in a
correct way on the IP101G; that is by first selecting the correct page.
This might previouly worked, because no one ever set another active page
before booting linux.
The last two patches add the new features.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Thu, 11 Feb 2021 07:47:49 +0000 (08:47 +0100)]
net: phy: icplus: add PHY counter for IP101G
The IP101G provides three counters: RX packets, CRC errors and symbol
errors. The error counters can be configured to clear automatically on
read. Unfortunately, this isn't true for the RX packet counter. Because
of this and because the RX packet counter is more likely to overflow,
than the error counters implement only support for the error counters.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Thu, 11 Feb 2021 07:47:48 +0000 (08:47 +0100)]
net: phy: icplus: fix paged register access
Registers >= 16 are paged. Be sure to set the page. It seems this was
working for now, because the default is correct for the registers used
in the driver at the moment. But this will also assume, nobody will
change the page select register before linux is started. The page select
register is _not_ reset with a soft reset of the PHY.
To ease the function reuse between the non-paged register space of the
IP101A and the IP101G, add noop read_page()/write_page() callbacks so
the IP101G functions can also be used for the IP101A.
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Thu, 11 Feb 2021 07:47:47 +0000 (08:47 +0100)]
net: phy: icplus: don't set APS_EN bit on IP101G
This bit is reserved as 'always-write-1'. While this is not a particular
error, because we are only setting it, guard it by checking the model to
prevent errors in the future.
Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Thu, 11 Feb 2021 07:47:46 +0000 (08:47 +0100)]
net: phy: icplus: split IP101A/G driver
Unfortunately, the IP101A and IP101G share the same PHY identifier.
While most of the functions are somewhat backwards compatible, there is
for example the APS_EN bit on the IP101A but on the IP101G this bit
reserved. Also, the IP101G has many more functionalities.
Deduce the model by accessing the page select register which - according
to the datasheet - is not available on the IP101A. If this register is
writable, assume we have an IP101G.
Split the combined IP101A/G driver into two separate drivers.
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 21:24:45 +0000 (13:24 -0800)]
Merge branch 'dsa-hsr-offload'
George McCollister says:
====================
add HSR offloading support for DSA switches
Add support for offloading HSR/PRP (IEC 62439-3) tag insertion, tag
removal, forwarding and duplication on DSA switches.
This series adds offloading to the xrs700x DSA driver.
Changes since RFC:
* Split hsr and dsa patches. (Florian Fainelli)
Changes since v1:
* Fixed some typos/wording. (Vladimir Oltean)
* eliminate IFF_HSR and use is_hsr_master instead. (Vladimir Oltean)
* Make hsr_handle_sup_frame handle skb_std as well (required when offloading)
* Don't add hsr tag for HSR v0 supervisory frames.
* Fixed tag insertion offloading for PRP.
Changes since v2:
* Return -EOPNOTSUPP instead of 0 in dsa_switch_hsr_join and
dsa_switch_hsr_leave. (Vladimir Oltean)
* Only allow ports 1 and 2 to be HSR/PRP redundant ports. (Tobias Waldekranz)
* Set and remove HSR features for both redundant ports. (Vladimir Oltean)
* Change port_hsr_leave() to return int instead of void.
* Remove hsr_init_skb() proto argument. (Vladimir Oltean)
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add offloading for HSR/PRP (IEC 62439-3) tag insertion, tag removal
forwarding and duplication supported by the xrs7000 series switches.
Only HSR v1 and PRP v1 are supported by the xrs7000 series switches (HSR
v0 is not).
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding on DSA switches.
Add DSA_NOTIFIER_HSR_JOIN and DSA_NOTIFIER_HSR_LEAVE which trigger calls
to .port_hsr_join and .port_hsr_leave in the DSA driver for the switch.
The DSA switch driver should then set netdev feature flags for the
HSR/PRP operation that it offloads.
NETIF_F_HW_HSR_TAG_INS
NETIF_F_HW_HSR_TAG_RM
NETIF_F_HW_HSR_FWD
NETIF_F_HW_HSR_DUP
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading of HSR/PRP (IEC 62439-3) tag insertion
tag removal, duplicate generation and forwarding.
For HSR, insertion involves the switch adding a 6 byte HSR header after
the 14 byte Ethernet header. For PRP it adds a 6 byte trailer.
Tag removal involves automatically stripping the HSR/PRP header/trailer
in the switch. This is possible when the switch also performs auto
deduplication using the HSR/PRP header/trailer (making it no longer
required).
Forwarding involves automatically forwarding between redundant ports in
an HSR. This is crucial because delay is accumulated as a frame passes
through each node in the ring.
Duplication involves the switch automatically sending a single frame
from the CPU port to both redundant ports. This is required because the
inserted HSR/PRP header/trailer must contain the same sequence number
on the frames sent out both redundant ports.
Export is_hsr_master so DSA can tell them apart from other devices in
dsa_slave_changeupper.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: hsr: generate supervision frame without HSR/PRP tag
For a switch to offload insertion of HSR/PRP tags, frames must not be
sent to the CPU facing switch port with a tag. Generate supervision frames
(eth type ETH_P_PRP) without HSR v1 (ETH_P_HSR)/PRP tag and rely on
create_tagged_frame which inserts it later. This will allow skipping the
tag insertion for all outgoing frames in the future which is required for
HSR v1/PRP tag insertions to be offloaded.
HSR v0 supervision frames always contain tag information so insertion of
the tag can't be offloaded. IEC 62439-3 Ed.2.0 (HSR v1) specifically
notes that this was changed since v0 to allow offloading.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: xrs700x: use of_match_ptr() on xrs700x_mdio_dt_ids
Use of_match_ptr() on xrs700x_mdio_dt_ids so that NULL is substituted
when CONFIG_OF isn't defined. This will prevent unnecessary use of
xrs700x_mdio_dt_ids when CONFIG_OF isn't defined.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 9 Feb 2021 19:20:28 +0000 (11:20 -0800)]
tcp: add some entropy in __inet_hash_connect()
Even when implementing RFC 6056 3.3.4 (Algorithm 4: Double-Hash
Port Selection Algorithm), a patient attacker could still be able
to collect enough state from an otherwise idle host.
Idea of this patch is to inject some noise, in the
cases __inet_hash_connect() found a candidate in the first
attempt.
This noise should not significantly reduce the collision
avoidance, and should be zero if connection table
is already well used.
Note that this is not implementing RFC 6056 3.3.5
because we think Algorithm 5 could hurt typical
workloads.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 9 Feb 2021 19:20:27 +0000 (11:20 -0800)]
tcp: change source port randomizarion at connect() time
RFC 6056 (Recommendations for Transport-Protocol Port Randomization)
provides good summary of why source selection needs extra care.
David Dworken reminded us that linux implements Algorithm 3
as described in RFC 6056 3.3.3
Quoting David :
In the context of the web, this creates an interesting info leak where
websites can count how many TCP connections a user's computer is
establishing over time. For example, this allows a website to count
exactly how many subresources a third party website loaded.
This also allows:
- Distinguishing between different users behind a VPN based on
distinct source port ranges.
- Tracking users over time across multiple networks.
- Covert communication channels between different browsers/browser
profiles running on the same computer
- Tracking what applications are running on a computer based on
the pattern of how fast source ports are getting incremented.
Section 3.3.4 describes an enhancement, that reduces
attackers ability to use the basic information currently
stored into the shared 'u32 hint'.
This change also decreases collision rate when
multiple applications need to connect() to
different destinations.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Dworken <ddworken@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Petr Machata [Tue, 9 Feb 2021 17:52:04 +0000 (18:52 +0100)]
Revert "net-loopback: set lo dev initial state to UP"
In commit a5f452b8d565 ("net-loopback: set lo dev initial state to UP"),
linux started automatically bringing up the loopback device of a newly
created namespace. However, an existing user script might reasonably have
the following stanza when creating a new namespace -- and in fact at least
tools/testing/selftests/net/fib_nexthops.sh in Linux's very own testsuite
does:
# set -e
# ip netns add foo
# ip -netns foo addr add 127.0.0.1/8 dev lo
# ip -netns foo link set lo up
# set +e
This will now fail, because the kernel reasonably rejects "ip addr add" of
a duplicate address. The described change of behavior therefore constitutes
a breakage. Revert it.
Fixes: a5f452b8d565 ("net-loopback: set lo dev initial state to UP") Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Walle [Tue, 9 Feb 2021 16:38:52 +0000 (17:38 +0100)]
net: phy: introduce phydev->port
At the moment, PORT_MII is reported in the ethtool ops. This is odd
because it is an interface between the MAC and the PHY and no external
port. Some network card drivers will overwrite the port to twisted pair
or fiber, though. Even worse, the MDI/MDIX setting is only used by
ethtool if the port is twisted pair.
Set the port to PORT_TP by default because most PHY drivers are copper
ones. If there is fibre support and it is enabled, the PHY driver will
set it to PORT_FIBRE.
This will change reporting PORT_MII to either PORT_TP or PORT_FIBRE;
except for the genphy fallback driver.
Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Lijun Pan [Thu, 11 Feb 2021 06:43:22 +0000 (00:43 -0600)]
ibmvnic: fix miscellaneous checks
Fix the following checkpatch checks:
CHECK: Macro argument 'off' may be better as '(off)' to
avoid precedence issues
CHECK: Alignment should match open parenthesis
CHECK: multiple assignments should be avoided
CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Please use a blank line after function/struct/union/enum
declarations
CHECK: Unnecessary parentheses around 'rc != H_FUNCTION'
Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Lijun Pan [Thu, 11 Feb 2021 06:43:18 +0000 (00:43 -0600)]
ibmvnic: prefer 'unsigned long' over 'unsigned long int'
Fix the following checkpatch warnings:
WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary
WARNING: Prefer 'long' over 'long int' as the int is unnecessary
Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 11 Feb 2021 20:59:29 +0000 (12:59 -0800)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2021-02-10
This series contains updates to i40e driver only.
Arkadiusz adds support for software controlled DCB. Upon disabling of the
firmware LLDP agent, the driver configures DCB with default values
(only one Traffic Class). At the same time, it allows a software based
LLDP agent - userspace application i.e. lldpad) to receive DCB TLVs
and set desired DCB configuration through DCB related netlink callbacks.
Aleksandr implements get and set ethtool ops for Energy Efficient
Ethernet.
Przemyslaw extends support for ntuple filters allowing for Flow Director
IPv6 and VLAN filters.
Kaixu Xia removes an unneeded assignment.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lukas Bulwahn [Fri, 5 Feb 2021 09:55:06 +0000 (10:55 +0100)]
net/mlx5: docs: correct section reference in table of contents
Commit 2c1cebfa1d23 ("net/mlx5: Add devlink subfunction port
documentation") refers to a section 'mlx5 port function' in the table of
contents, but includes a section 'mlx5 function attributes' instead.
Hence, make htmldocs warns:
mlx5.rst:16: WARNING: Unknown target name: "mlx5 port function".
Correct the section reference in table of contents to the actual name of
section in the documentation.
Also, tune another section underline while visiting this document.
David Howells [Tue, 9 Feb 2021 15:02:05 +0000 (15:02 +0000)]
rxrpc: Fix missing dependency on NET_UDP_TUNNEL
The changes to make rxrpc create the udp socket missed a bit to add the
Kconfig dependency on the udp tunnel code to do this.
Fix this by adding making AF_RXRPC select NET_UDP_TUNNEL.
Fixes: 6b5fc4c8f1df ("rxrpc: use udp tunnel APIs instead of open code in rxrpc_open_socket") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com>
cc: alaa@dev.mellanox.co.il
cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 10 Feb 2021 23:19:54 +0000 (15:19 -0800)]
Merge branch 'octeon-ethtool'
Hariprasad Kelam says:
====================
ethtool support for fec and link configuration
This series of patches add support for forward error correction(fec) and
physical link configuration. Patches 1&2 adds necessary mbox handlers for fec
mode configuration request and to fetch stats. Patch 3 registers driver
callbacks for fec mode configuration and display. Patch 4&5 adds support of mbox
handlers for configuring link parameters like speed/duplex and autoneg etc.
Patche 6&7 registers driver callbacks for physical link configuration.
Change-log:
v2:
- Fixed review comments
- Corrected indentation issues
- Return -ENOMEM incase of mbox allocation failure
- added validation for input fecparams bitmask values
- added more comments
V3:
- Removed inline functions
- Make use of ethtool helpers APIs to display supported
advertised modes
- corrected indentation issues
- code changes such that return early in case of failure
to aid branch prediction
v4:
- Corrected indentation issues
- Use FEC_OFF if user requests for FEC_AUTO mode
- Do not clear fec stats in case of user changes
fec mode
- dont hide fec stats depending on interface mode
selection
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Christina Jacob [Tue, 9 Feb 2021 10:35:31 +0000 (16:05 +0530)]
octeontx2-pf: ethtool physical link configuration
Register set_link_ksetting callback with driver such that
link configurations parameters like advertised mode,speed, duplex
and autoneg can be configured.
below command
ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on
Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Christina Jacob [Tue, 9 Feb 2021 10:35:30 +0000 (16:05 +0530)]
octeontx2-pf: ethtool physical link status
Register get_link_ksettings callback to get link status information
from the driver. As virtual function (vf) shares same physical link
same API is used for both the drivers and for loop back drivers
simply returns the fixed values as its does not have physical link.
ethtool eth3
Settings for eth3:
Supported ports: [ ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
10000baseKR/Full
1000baseX/Full
Supports auto-negotiation: No
Supported FEC modes: BaseR RS
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: None
ethtool lbk0
Settings for lbk0:
Speed: 100000Mb/s
Duplex: Full
Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Christina Jacob [Tue, 9 Feb 2021 10:35:29 +0000 (16:05 +0530)]
octeontx2-af: advertised link modes support on cgx
CGX supports setting advertised link modes on physical link.
This patch adds support to derive cgx mode from ethtool
link mode and pass it to firmware to configure the same.
Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Christina Jacob [Tue, 9 Feb 2021 10:35:28 +0000 (16:05 +0530)]
octeontx2-af: Physical link configuration support
CGX LMAC, the physical interface support link configuration parameters
like speed, auto negotiation, duplex etc. Firmware saves these into
memory region shared between firmware and this driver.
This patch adds mailbox handler set_link_mode, fw_data_get to
configure and read these parameters.
Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Manlunas [Tue, 9 Feb 2021 10:35:26 +0000 (16:05 +0530)]
octeontx2-af: Add new CGX_CMD to get PHY FEC statistics
This patch adds support to fetch fec stats from PHY. The stats are
put in the shared data struct fwdata. A PHY driver indicates
that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats
Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and
CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync
with firmware's enum list.
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com> Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
CGX block supports forward error correction modes baseR
and RS. This patch adds support to set encoding mode
and to read corrected/uncorrected block counters
Adds new mailbox handlers set_fec to configure encoding modes
and fec_stats to read counters and also increase mbox timeout
to accomdate firmware command response timeout.
Along with new CGX_CMD_SET_FEC command add other commands to
sync with kernel enum list with firmware.
Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kevin Hao [Tue, 9 Feb 2021 10:15:16 +0000 (18:15 +0800)]
net: octeontx2: Fix the confusion in buffer alloc failure path
Pavel pointed that the return of dma_addr_t in
otx2_alloc_rbuf/__otx2_alloc_rbuf() seem suspicious because a negative
error code may be returned in some cases. For a dma_addr_t, the error
code such as -ENOMEM does seem a valid value, so we can't judge if the
buffer allocation fail or not based on that value. Add a parameter for
otx2_alloc_rbuf/__otx2_alloc_rbuf() to store the dma address and make
the return value to indicate if the buffer allocation really fail or
not.
Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Loic Poulain [Tue, 9 Feb 2021 09:05:58 +0000 (10:05 +0100)]
net: mhi: Add mbim proto
MBIM has initially been specified by USB-IF for transporting data (IP)
between a modem and a host over USB. However some modern modems also
support MBIM over PCIe (via MHI). In the same way as QMAP(rmnet), it
allows to aggregate IP packets and to perform context multiplexing.
This change adds minimal MBIM data transport support to MHI, allowing
to support MBIM only modems. MBIM being based on USB NCM, it reuses
and copy some helpers/functions from the USB stack (cdc-ncm, cdc-mbim).
Note that is a subset of the CDC-MBIM specification, supporting only
transport of network data (IP), there is no support for DSS. Moreover
the multi-session (for multi-pdn) is not supported in this initial
version, but will be added latter, and aligned with the cdc-mbim
solution (VLAN tags).
This code has been inspired from the mhi_mbim downstream implementation
(Carl Yin <carl.yin@quectel.com>).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Loic Poulain [Tue, 9 Feb 2021 09:05:54 +0000 (10:05 +0100)]
net: mhi: Add protocol support
MHI can transport different protocols, some are handled at upper level,
like IP and QMAP(rmnet/netlink), but others will need to be inside MHI
net driver, like mbim. This change adds support for protocol rx and
tx_fixup callbacks registration, that can be used to encode/decode the
targeted protocol.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
cxgb4: collect serial config version from register
Collect serial config version information directly from an internal
register, instead of explicitly resizing VPD.
v2:
- Add comments on info stored in PCIE_STATIC_SPARE2 register.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Allow user to specify VLAN field and add it to flow director. Show VLAN
field in "ethtool -n ethx" command.
Handle VLAN type and tag field provided by ethtool command. Refactored
filter addition, by replacing static arrays with runtime dummy packet
creation, which allows specifying VLAN field.
Previously, VLAN field was omitted.
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Flow director for IPv6 is not supported.
1) Implementation of support for IPv6 flow director.
2) Added handlers for addition of TCP6, UDP6, SCTP6, IPv6.
3) Refactored legacy code to make it more generic.
4) Added packet templates for TCP6, UDP6, SCTP6, IPv6.
5) Added handling of IPv6 source and destination address for flow director.
6) Improved argument passing for source and destination portin TCP6, UDP6
and SCTP6.
7) Added handling of ethtool -n for IPv6, TCP6,UDP6, SCTP6.
8) Used correct bit flag regarding FLEXOFF field of flow director data
descriptor.
Without this patch, there would be no support for flow director on IPv6,
TCP6, UDP6, SCTP6.
Tested based on x710 datasheet by using:
ethtool -N enp133s0f0 flow-type tcp4 src-port 13 dst-port 37 user-def 0x44142 action 1
ethtool -N enp133s0f0 flow-type tcp6 src-port 13 dst-port 40 user-def 0x44142 action 2
ethtool -N enp133s0f0 flow-type udp4 src-port 20 dst-port 40 user-def 0x44142 action 3
ethtool -N enp133s0f0 flow-type udp6 src-port 25 dst-port 40 user-def 0x44142 action 4
ethtool -N enp133s0f0 flow-type sctp4 src-port 55 dst-port 65 user-def 0x44142 action 5
ethtool -N enp133s0f0 flow-type sctp6 src-port 60 dst-port 40 user-def 0x44142 action 6
ethtool -N enp133s0f0 flow-type ip4 src-ip 1.1.1.1 dst-ip 1.1.1.4 user-def 0x44142 action 7
ethtool -N enp133s0f0 flow-type ip6 src-ip fe80::3efd:feff:fe6f:bbbb dst-ip fe80::3efd:feff:fe6f:aaaa user-def 0x44142 action 8
Then send traffic from client which matches the criteria provided to ethtool.
Observe that packets are redirected to user set queues with ethtool -S <interface>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Add EEE status getting & setting implementation
Implement Energy Efficient Ethernet (EEE) status getting & setting.
The i40e_get_eee() requesting PHY EEE capabilities from firmware.
The i40e_set_eee() function requests PHY EEE capabilities
from firmware and sets PHY EEE advertising to full abilities or 0
depending whether EEE is to be enabled or disabled.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Add netlink callbacks support for software based DCB
Add callbacks used by software based LLDP agent, which allows to
configure DCB feature from userspace.
Update copyright dates as appropriate.
If LLDP agent is turned off in BIOS, or after setting private flag
("disable-fw-lldp on"). The driver initialized DCB functionality with
default values, one traffic class with 100% bandwidth allocated.
The new netlink callbacks are required for software LLDP agent, it
must be able to acquire current DCB configuration of a network port
and apply DCB configuration changes, if required.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Add init and default config of software based DCB
Add extra handling on changing the "disable-fw-lldp" private
flag to properly initialize software based DCB feature.
Add default configuration of DCB functionality when Firmware
LLDP agent is turned off, in case of driver probe and device
reset on reconfiguration.
Update copyright dates as appropriate.
Software based DCB is a brand-new feature in i40e driver.
Before, DCB was implemented by Firmware LLDP agent only. The agent was
responsible for handling incoming DCB-related LLDP frames and
applying received DCB configuration to hardware.
Default configuration and new initialization flow for software based
DCB is required. If LLDP agent is turned off in BIOS, or after
setting private flag ("disable-fw-lldp on"). The driver initializes
DCB functionality with default values, one traffic class with 100%
bandwidth allocated.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e: Add hardware configuration for software based DCB
Add registers and definitions required for applying
DCB related hardware configuration.
Add functions responsible for calculating and setting proper
hardware configuration values for software based DCB functionality.
Add function responsible for invoking Admin Queue command, which
results in applying new DCB configuration to the hardware.
Update copyright dates as appropriate.
Software based DCB is a brand-new feature in i40e driver.
Before, DCB was implemented by Firmware LLDP agent only. The agent was
responsible for handling incoming DCB-related LLDP frames and
applying received DCB configuration to hardware.
New communication channel between software and hardware is required
for software driver. It must be able to calculate and configure all
the registers related for DCB feature.
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Linus Torvalds [Wed, 10 Feb 2021 20:03:35 +0000 (12:03 -0800)]
Merge tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Address a performance regression related to scale-invariance on x86
that may prevent turbo CPU frequencies from being used in certain
workloads on systems using acpi-cpufreq as the CPU performance scaling
driver and schedutil as the scaling governor"
* tag 'pm-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: ACPI: Update arch scale-invariance max perf ratio if CPPC is not there
cpufreq: ACPI: Extend frequency tables to cover boost frequencies
Linus Torvalds [Wed, 10 Feb 2021 19:58:21 +0000 (11:58 -0800)]
Merge tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a problematic ACPICA commit that changed the code to attempt to
update memory regions which may be read-only on some systems (Ard
Biesheuvel)"
* tag 'acpi-5.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Interpreter: fix memory leak by using existing buffer"
Pull networking fixes from David Miller:
"Another pile of networing fixes:
1) ath9k build error fix from Arnd Bergmann
2) dma memory leak fix in mediatec driver from Lorenzo Bianconi.
3) bpf int3 kprobe fix from Alexei Starovoitov.
4) bpf stackmap integer overflow fix from Bui Quang Minh.
5) Add usb device ids for Cinterion MV31 to qmi_qwwan driver, from
Christoph Schemmel.
6) Don't update deleted entry in xt_recent netfilter module, from
Jazsef Kadlecsik.
7) Use after free in nftables, fix from Pablo Neira Ayuso.
8) Header checksum fix in flowtable from Sven Auhagen.
9) Validate user controlled length in qrtr code, from Sabyrzhan
Tasbolatov.
10) Fix race in xen/netback, from Juergen Gross,
11) New device ID in cxgb4, from Raju Rangoju.
12) Fix ring locking in rxrpc release call, from David Howells.
13) Don't return LAPB error codes from x25_open(), from Xie He.
14) Missing error returns in gsi_channel_setup() from Alex Elder.
15) Get skb_copy_and_csum_datagram working properly with odd segment
sizes, from Willem de Bruijn.
16) Missing RFS/RSS table init in enetc driver, from Vladimir Oltean.
17) Do teardown on probe failure in DSA, from Vladimir Oltean.
18) Fix compilation failures of txtimestamp selftest, from Vadim
Fedorenko.
19) Limit rx per-napi gro queue size to fix latency regression, from
Eric Dumazet.
20) dpaa_eth xdp fixes from Camelia Groza.
21) Missing txq mode update when switching CBS off, in stmmac driver,
from Mohammad Athari Bin Ismail.
22) Failover pending logic fix in ibmvnic driver, from Sukadev
Bhattiprolu.
23) Null deref fix in vmw_vsock, from Norbert Slusarek.
24) Missing verdict update in xdp paths of ena driver, from Shay
Agroskin.
25) seq_file iteration fix in sctp from Neil Brown.
26) bpf 32-bit src register truncation fix on div/mod, from Daniel
Borkmann.
27) Fix jmp32 pruning in bpf verifier, from Daniel Borkmann.
28) Fix locking in vsock_shutdown(), from Stefano Garzarella.
29) Various missing index bound checks in hns3 driver, from Yufeng Mo.
30) Flush ports on .phylink_mac_link_down() in dsa felix driver, from
Vladimir Oltean.
31) Don't mix up stp and mrp port states in bridge layer, from Horatiu
Vultur.
32) Fix locking during netif_tx_disable(), from Edwin Peer"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
bpf: Fix 32 bit src register truncation on div/mod
bpf: Fix verifier jmp32 pruning decision logic
bpf: Fix verifier jsgt branch analysis on max bound
vsock: fix locking in vsock_shutdown()
net: hns3: add a check for index in hclge_get_rss_key()
net: hns3: add a check for tqp_index in hclge_get_ring_chain_from_mbx()
net: hns3: add a check for queue_id in hclge_reset_vf_queue()
net: dsa: felix: implement port flushing on .phylink_mac_link_down
switchdev: mrp: Remove SWITCHDEV_ATTR_ID_MRP_PORT_STAT
bridge: mrp: Fix the usage of br_mrp_port_switchdev_set_state
net: watchdog: hold device global xmit lock during tx disable
netfilter: nftables: relax check for stateful expressions in set definition
netfilter: conntrack: skip identical origin tuple in same zone only
vsock/virtio: update credit only if socket is not closed
net: fix iteration for sctp transport seq_files
net: ena: Update XDP verdict upon failure
net/vmw_vsock: improve locking in vsock_connect_timeout()
net/vmw_vsock: fix NULL pointer dereference
ibmvnic: Clear failover_pending if unable to schedule
net: stmmac: set TxQ mode back to DCB after disabling CBS
...
Linus Torvalds [Wed, 10 Feb 2021 19:22:41 +0000 (11:22 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (kasan, mremap, tmpfs,
selftests, memcg, and slub), MAINTAINERS, squashfs, nilfs2, and
firmware"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
nilfs2: make splice write available again
mm, slub: better heuristic for number of cpus when calculating slab order
Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"
MAINTAINERS: update Andrey Ryabinin's email address
selftests/vm: rename file run_vmtests to run_vmtests.sh
tmpfs: disallow CONFIG_TMPFS_INODE64 on alpha
tmpfs: disallow CONFIG_TMPFS_INODE64 on s390
mm/mremap: fix BUILD_BUG_ON() error in get_extent
firmware_loader: align .builtin_fw to 8
kasan: fix stack traces dependency for HW_TAGS
squashfs: add more sanity checks in xattr id lookup
squashfs: add more sanity checks in inode lookup
squashfs: add more sanity checks in id lookup
squashfs: avoid out of bounds writes in decompressors
Joachim Henke [Tue, 9 Feb 2021 21:42:36 +0000 (13:42 -0800)]
nilfs2: make splice write available again
Since 5.10, splice() or sendfile() to NILFS2 return EINVAL. This was
caused by commit ec25677859f2 ("fs: don't allow splice read/write
without explicit ops").
This patch initializes the splice_write field in file_operations, like
most file systems do, to restore the functionality.
Vlastimil Babka [Tue, 9 Feb 2021 21:42:32 +0000 (13:42 -0800)]
mm, slub: better heuristic for number of cpus when calculating slab order
When creating a new kmem cache, SLUB determines how large the slab pages
will based on number of inputs, including the number of CPUs in the
system. Larger slab pages mean that more objects can be allocated/free
from per-cpu slabs before accessing shared structures, but also
potentially more memory can be wasted due to low slab usage and
fragmentation. The rough idea of using number of CPUs is that larger
systems will be more likely to benefit from reduced contention, and also
should have enough memory to spare.
Number of CPUs used to be determined as nr_cpu_ids, which is number of
possible cpus, but on some systems many will never be onlined, thus
commit a3579c3e856c ("mm/slub: let number of online CPUs determine the
slub page order") changed it to nr_online_cpus(). However, for kmem
caches created early before CPUs are onlined, this may lead to
permamently low slab page sizes.
Vincent reports a regression [1] of hackbench on arm64 systems:
"I'm facing significant performances regression on a large arm64
server system (224 CPUs). Regressions is also present on small arm64
system (8 CPUs) but in a far smaller order of magnitude
On 224 CPUs system : 9 iterations of hackbench -l 16000 -g 16
v5.11-rc4 : 9.135sec (+/- 0.45%)
v5.11-rc4 + revert this patch: 3.173sec (+/- 0.48%)
v5.10: 3.136sec (+/- 0.40%)"
Mel reports a regression [2] of hackbench on x86_64, with lockstat suggesting
page allocator contention:
"i.e. the patch incurs a 7% to 32% performance penalty. This bisected
cleanly yesterday when I was looking for the regression and then
found the thread.
Numerous caches change size. For example, kmalloc-512 goes from
order-0 (vanilla) to order-2 with the revert.
So mostly this is down to the number of times SLUB calls into the
page allocator which only caches order-0 pages on a per-cpu basis"
Clearly num_online_cpus() doesn't work too early in bootup. We could
change the order dynamically in a memory hotplug callback, but runtime
order changing for existing kmem caches has been already shown as
dangerous, and removed in 5eb9277981cd ("mm, slub: remove runtime
allocation order changes").
It could be resurrected in a safe manner with some effort, but to fix
the regression we need something simpler.
We could use num_present_cpus() that should be the number of physically
present CPUs even before they are onlined. That would work for PowerPC
[3], which triggered the original commit, but that still doesn't work on
arm64 [4] as explained in [5].
So this patch tries to determine the best available value without
specific arch knowledge.
- num_present_cpus() if the number is larger than 1, as that means the
arch is likely setting it properly
- nr_cpu_ids otherwise
This should fix the reported regressions while also keeping the effect
of a3579c3e856c for PowerPC systems. It's possible there are
configurations where num_present_cpus() is 1 during boot while
nr_cpu_ids is at the same time bloated, so these (if they exist) would
keep the large orders based on nr_cpu_ids as was before a3579c3e856c.
Johannes Weiner [Tue, 9 Feb 2021 21:42:28 +0000 (13:42 -0800)]
Revert "mm: memcontrol: avoid workload stalls when lowering memory.high"
This reverts commit d8f966bdd51bb0f1ab993c6ee27e5b80135204b0, as it can
cause writers to memory.high to get stuck in the kernel forever,
performing page reclaim and consuming excessive amounts of CPU cycles.
Before the patch, a write to memory.high would first put the new limit
in place for the workload, and then reclaim the requested delta. After
the patch, the kernel tries to reclaim the delta before putting the new
limit into place, in order to not overwhelm the workload with a sudden,
large excess over the limit. However, if reclaim is actively racing
with new allocations from the uncurbed workload, it can keep the write()
working inside the kernel indefinitely.
This is causing problems in Facebook production. A privileged
system-level daemon that adjusts memory.high for various workloads
running on a host can get unexpectedly stuck in the kernel and
essentially turn into a sort of involuntary kswapd for one of the
workloads. We've observed that daemon busy-spin in a write() for
minutes at a time, neglecting its other duties on the system, and
expending privileged system resources on behalf of a workload.
To remedy this, we have first considered changing the reclaim logic to
break out after a couple of loops - whether the workload has converged
to the new limit or not - and bound the write() call this way. However,
the root cause that inspired the sequence change in the first place has
been fixed through other means, and so a revert back to the proven
limit-setting sequence, also used by memory.max, is preferable.
The sequence was changed to avoid extreme latencies in the workload when
the limit was lowered: the sudden, large excess created by the limit
lowering would erroneously trigger the penalty sleeping code that is
meant to throttle excessive growth from below. Allocating threads could
end up sleeping long after the write() had already reclaimed the delta
for which they were being punished.
However, erroneous throttling also caused problems in other scenarios at
around the same time. This resulted in commit ffdc4a8bd9f5 ("mm, memcg:
reclaim more aggressively before high allocator throttling"), included
in the same release as the offending commit. When allocating threads
now encounter large excess caused by a racing write() to memory.high,
instead of entering punitive sleeps, they will simply be tasked with
helping reclaim down the excess, and will be held no longer than it
takes to accomplish that. This is in line with regular limit
enforcement - i.e. if the workload allocates up against or over an
otherwise unchanged limit from below.
With the patch breaking userspace, and the root cause addressed by other
means already, revert it again.
Link: https://lkml.kernel.org/r/20210122184341.292461-1-hannes@cmpxchg.org Fixes: d8f966bdd51b ("mm: memcontrol: avoid workload stalls when lowering memory.high") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Tejun Heo <tj@kernel.org> Acked-by: Chris Down <chris@chrisdown.name> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: <stable@vger.kernel.org> [5.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log