Linus Torvalds [Sun, 29 Aug 2021 17:54:14 +0000 (10:54 -0700)]
Merge tag 'sched_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Have get_push_task() check whether current has migration disabled and
thus avoid useless invocations of the migration thread
- Rework initialization flow so that all rq->core's are initialized,
even of CPUs which have not been onlined yet, so that iterating over
them all works as expected
* tag 'sched_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix get_push_task() vs migrate_disable()
sched: Fix Core-wide rq->lock for uninitialized CPUs
Linus Torvalds [Sun, 29 Aug 2021 17:36:32 +0000 (10:36 -0700)]
Merge tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Prevent the amd/power module from being removed while in use
- Mark AMD IBS as not supporting content exclusion
- Add a workaround for AMD erratum #1197 where IBS registers might not
be restored properly after exiting CC6 state
- Fix a potential truncation of a 32-bit variable due to shifting
- Read the correct bits describing the number of configurable address
ranges on Intel PT
* tag 'perf_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/power: Assign pmu.module
perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op
perf/x86/amd/ibs: Work around erratum #1197
perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32
perf/x86/intel/pt: Fix mask of num_address_ranges
Linus Torvalds [Sun, 29 Aug 2021 17:26:00 +0000 (10:26 -0700)]
Merge tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix build error on RHEL where -Werror=maybe-uninitialized is set.
- Restore the firmware's IDT when calling EFI boot services and before
ExitBootServices() has been called. This fixes a boot failure on what
appears to be a tablet with 32-bit UEFI running a 64-bit kernel.
* tag 'x86_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix a maybe-uninitialized build warning treated as error
x86/efi: Restore Firmware IDT before calling ExitBootServices()
The probe was manually passing NULL instead of dev to devm_clk_hw_register.
This caused a Unable to handle kernel NULL pointer dereference error.
Fix this by passing 'dev'.
Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: b56c7be36828 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Linus Torvalds [Sat, 28 Aug 2021 18:39:16 +0000 (11:39 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix for a race introduced by a fix that went into 5.14-rc5"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix hang of freezing queue between blocking and running device
Linus Torvalds [Sat, 28 Aug 2021 18:32:16 +0000 (11:32 -0700)]
Merge tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few tiny USB fixes for reported issues with some USB
drivers.
These fixes include:
- gadget driver fixes for regressions
- tcpm driver fix
- dwc3 driver fixes
- xhci renesas firmware loading fix, again.
- usb serial option driver device id addition
- usb serial ch341 revert for regression
All all of these have been in linux-next with no reported problems"
* tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: u_audio: fix race condition on endpoint stop
usb: gadget: f_uac2: fixup feedback endpoint stop
usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running
usb: renesas-xhci: Prefer firmware loading on unknown ROM state
usb: dwc3: gadget: Stop EP0 transfers during pullup disable
usb: dwc3: gadget: Fix dwc3_calc_trbs_left()
Revert "USB: serial: ch341: fix character loss at high transfer rates"
USB: serial: option: add new VID/PID to support Fibocom FG150
Linus Torvalds [Fri, 27 Aug 2021 23:08:29 +0000 (16:08 -0700)]
Merge tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert the mq-deadline priority handling, it's causing serious
performance regressions. While experimental patches exists to fix
this up, it's too late to do so now. Revert it and re-do it properly
for 5.15 instead.
- Fix a NULL vs IS_ERR() regression in this release (Dan)
- Fix a mq-deadline accounting regression in this release (Bart)
- Mark cryptoloop as deprecated. It's broken and dm-crypt fully
supports it, and it's actively intefering with loop. Plan on removal
for 5.16 (Christoph)
* tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block:
cryptoloop: add a deprecation warning
pd: fix a NULL vs IS_ERR() check
Revert "block/mq-deadline: Prioritize high-priority requests"
mq-deadline: Fix request accounting
Linus Torvalds [Fri, 27 Aug 2021 22:59:00 +0000 (15:59 -0700)]
Merge tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Just two trivial fixes from the reset driver tree, nothing else came
up since the last soc fixes"
* tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
reset: reset-zynqmp: Fixed the argument data type
reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5
Linus Torvalds [Fri, 27 Aug 2021 19:18:09 +0000 (12:18 -0700)]
Merge tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a regression introduced during this cycle that has been partially
addressed by an earlier commit (Andy Shevchenko)"
* tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()
Linus Torvalds [Fri, 27 Aug 2021 19:06:51 +0000 (12:06 -0700)]
Merge tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues introduced during this cycle, one of which is a
regression and the other one affects new code.
Specifics:
- Prevent the operating performance points (OPP) code from crashing
when some entries in the table of required OPPs are set to error
pointer values (Marijn Suijten)
- Prevent the generic power domains (genpd) framework from
incorrectly overriding the performance state of a device set by its
driver while it is runtime-suspended or when runtime PM of it is
disabled (Dmitry Osipenko)"
* tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Improve runtime PM performance state handling
opp: core: Check for pending links before reading required_opp pointers
virtio-mem: fix sleeping in RCU read side section in virtio_mem_online_page_cb()
virtio_mem_set_fake_offline() might sleep now, and we call it under
rcu_read_lock(). To fix it, simply move the rcu_read_unlock() further
up, as we're done with the device.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 0475e3456841: "virtio-mem: use page_offline_(start|end) when setting PageOffline() Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: virtualization@lists.linux-foundation.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 27 Aug 2021 18:04:57 +0000 (11:04 -0700)]
Merge tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- device tree updates for the Microsemi Polarfire development kit that
fix some mismatches between the u-boot and Linux enternet entries
- ensure that the F register state is correctly reflected in core dumps
* tag 'riscv-for-linus-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: microchip: Add ethernet0 to the aliases node
riscv: dts: microchip: Use 'local-mac-address' for emac1
riscv: Ensure the value of FP registers in the core dump file is up to date
Linus Torvalds [Fri, 27 Aug 2021 16:52:48 +0000 (09:52 -0700)]
Merge tag 'mmc-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fix from Ulf Hansson:
- sdhci-iproc: Fix clock error for ACPI rpi's
* tag 'mmc-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"
Support for cryptoloop has been officially marked broken and deprecated
in favor of dm-crypt (which supports the same broken algorithms if
needed) in Linux 2.6.4 (released in March 2004), and support for it has
been entirely removed from losetup in util-linux 2.23 (released in April
2013). Add a warning and a deprecation schedule.
It turned out that the change from the reverted commit breaks the ACPI
based rpi's because it causes the 100Mhz max clock to be overridden to the
return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a
OF/DT based clock device.
Reported-by: Jeremy Linton <jeremy.linton@arm.com> Fixes: 9fefe411fc80 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Jerome Brunet [Fri, 27 Aug 2021 09:29:27 +0000 (11:29 +0200)]
usb: gadget: u_audio: fix race condition on endpoint stop
If the endpoint completion callback is call right after the ep_enabled flag
is cleared and before usb_ep_dequeue() is call, we could do a double free
on the request and the associated buffer.
Fix this by clearing ep_enabled after all the endpoint requests have been
dequeued.
The issue happens only when the gadget is using the sync type "async", not
"adaptive". This indicates that problem is coming from the feedback
endpoint, which is only used with async synchronization mode.
The problem is that request is freed regardless of usb_ep_dequeue(), which
ends up badly if the request is not actually dequeued yet.
Update the feedback endpoint free function to release the endpoint the same
way it is done for the data endpoint, which takes care of the problem.
* tag 'drm-fixes-2021-08-27' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dp: Drop redundant debug print
drm/i915: Fix syncmap memory leak
drm/amdgpu: Fix build with missing pm_suspend_target_state module export
drm/amdgpu: Cancel delayed work when GFXOFF is disabled
drm/amdgpu: use the preferred pin domain after the check
drm/imx: ipuv3-plane: fix accidental partial revert of 8 pixel alignment fix
gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats
Dave Airlie [Fri, 27 Aug 2021 00:49:32 +0000 (10:49 +1000)]
Merge tag 'imx-drm-fixes-2021-08-18' of git://git.pengutronix.de/pza/linux into drm-fixes
drm/imx: imx-drm alignment and plane offset fixes
Fix an accidental partial revert of commit b10927f2f183 ("drm/imx: Add 8
pixel alignment fix") and plane offset calculations for capture of
non-aligned resolutions.
When running as Xen PV guest, masking MSI-X is a responsibility of the
hypervisor. The guest has no write access to the relevant BAR at all - when
it tries to, it results in a crash like this:
BUG: unable to handle page fault for address: ffffc9004069100c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0
e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e]
e1000_probe+0x41f/0xdb0 [e1000e]
local_pci_probe+0x42/0x80
(...)
The recently introduced function msix_mask_all() does not check the global
variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking
of MSI[-X] interrupts.
Add the check to make this function XEN PV compatible.
Fixes: dc92def93c54 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
Linus Torvalds [Thu, 26 Aug 2021 20:26:40 +0000 (13:26 -0700)]
Merge tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fix from Bruce Fields:
"This is a one-liner fix for a serious bug that can cause the server to
become unresponsive to a client, so I think it's worth the last-minute
inclusion for 5.14"
* tag 'nfsd-5.14-1' of git://linux-nfs.org/~bfields/linux:
SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...
- rtnetlink: return correct error on changing device netns
- e1000e: do not try to recover the NVM checksum on Tiger Lake"
* tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
Revert "net: really fix the build..."
net: hns3: fix get wrong pfc_en when query PFC configuration
net: hns3: fix GRO configuration error after reset
net: hns3: change the method of getting cmd index in debugfs
net: hns3: fix duplicate node in VLAN list
net: hns3: fix speed unknown issue in bond 4
net: hns3: add waiting time before cmdq memory is released
net: hns3: clear hardware resource when loading driver
net: fix NULL pointer reference in cipso_v4_doi_free
rtnetlink: Return correct error on changing device netns
net: dsa: hellcreek: Adjust schedule look ahead window
net: dsa: hellcreek: Fix incorrect setting of GCL
cxgb4: dont touch blocked freelist bitmap after free
ipv4: use siphash instead of Jenkins in fnhe_hashfun()
ipv6: use siphash in rt6_exception_hash()
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
net: usb: asix: ax88772: fix boolconv.cocci warnings
net/sched: ets: fix crash when flipping from 'strict' to 'quantum'
qede: Fix memset corruption
net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
...
Zhen reports that this commit slows down mq-deadline on a 128 thread
box, going from 258K IOPS to 170-180K. My testing shows that Optane
gen2 IOPS goes from 2.3M IOPS to 1.2M IOPS on a 64 thread box.
Looking in detail at the code, the main culprit here is needing to sum
percpu counters in the dispatch hot path, leading to very high CPU
utilization there. To make matters worse, the code currently needs to
sum 2 percpu counters, and it does so in the most naive way of iterating
possible CPUs _twice_.
Since we're close to release, revert this commit and we can re-do it
with regular per-priority counters instead for the 5.15 kernel.
Linus Torvalds [Thu, 26 Aug 2021 18:26:00 +0000 (11:26 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"We received a report this week that the generic version of
pfn_valid(), which we switched to this merge window in fc48850c2cbf
("arm64/mm: drop HAVE_ARCH_PFN_VALID"), interacts badly with
dma_map_resource() due to the following check:
/* Don't allow RAM to be mapped */
if (WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr))))
return DMA_MAPPING_ERROR;
Since the ongoing saga to determine the semantics of pfn_valid() is
unlikely to be resolved this week (does it indicate valid memory, or
just the presence of a struct page, or whether that struct page has
been initialised?), just revert back to our old version of pfn_valid()
for 5.14.
Summary:
- Fix dma_map_resource() by reverting back to old pfn_valid() code"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Partially revert "arm64/mm: drop HAVE_ARCH_PFN_VALID"
Linus Torvalds [Thu, 26 Aug 2021 18:18:30 +0000 (11:18 -0700)]
Merge tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two memory management fixes for the filesystem"
* tag 'ceph-for-5.14-rc8' of git://github.com/ceph/ceph-client:
ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
ceph: correctly handle releasing an embedded cap flush
Wren and Nicolas reported that ath11k was failing to initialise QCA6390
Wi-Fi 6 device with error:
qcom_mhi_qrtr: probe of mhi0_IPCR failed with error -22
Commit 1736e2fc5c6a ("net: really fix the build..."), introduced in
v5.14-rc5, caused this regression in qrtr. Most likely all ath11k
devices are broken, but I only tested QCA6390. Let's revert the broken
commit so that ath11k works again.
Linus Torvalds [Thu, 26 Aug 2021 18:05:11 +0000 (11:05 -0700)]
Merge tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix that I think qualifies for a late merge. It's a revert of
a one-liner fix that meanwhile got backported to stable kernels and we
got reports from users.
The broken fix prevents creating compressed inline extents, which
could be noticeable on space consumption.
Technically it's a regression as the patch was merged in 5.14-rc1 but
got propagated to several stable kernels and has higher exposure than
a 'typical' development cycle bug"
* tag 'for-5.14-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: compression: don't try to compress if we don't have enough pages"
push_rt_task() attempts to move the currently running task away if the
next runnable task has migration disabled and therefore is pinned on the
current CPU.
The current task is retrieved via get_push_task() which only checks for
nr_cpus_allowed == 1, but does not check whether the task has migration
disabled and therefore cannot be moved either. The consequence is a
pointless invocation of the migration thread which correctly observes
that the task cannot be moved.
Return NULL if the task has migration disabled and cannot be moved to
another CPU.
Andy Shevchenko [Thu, 26 Aug 2021 10:53:24 +0000 (13:53 +0300)]
media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()
The commit ba40affef143 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") moved adev assignment outside of error
path and hence made acpi_dev_put(sensor->adev) a no-op. We still
need to drop reference count on error path, and to achieve that,
replace sensor->adev by locally assigned adev.
Fixes: ba40affef143 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()")
Depends-on: 2174f188ea3e ("ACPI: fix NULL pointer dereference") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Guangbin Huang [Thu, 26 Aug 2021 11:22:01 +0000 (19:22 +0800)]
net: hns3: fix get wrong pfc_en when query PFC configuration
Currently, when query PFC configuration by dcbtool, driver will return
PFC enable status based on TC. As all priorities are mapped to TC0 by
default, if TC0 is enabled, then all priorities mapped to TC0 will be
shown as enabled status when query PFC setting, even though some
priorities have never been set.
for example:
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off
$ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on
$ dcb pfc show dev eth0
pfc-cap 4 macsec-bypass off delay 0
prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on
To fix this problem, just returns user's PFC config parameter saved in
driver.
Fixes: 0eda0d74aa27 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yufeng Mo [Thu, 26 Aug 2021 11:22:00 +0000 (19:22 +0800)]
net: hns3: fix GRO configuration error after reset
The GRO configuration is enabled by default after reset. This
is incorrect and should be restored to the user-configured value.
So this restoration is added during reset initialization.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yufeng Mo [Thu, 26 Aug 2021 11:21:59 +0000 (19:21 +0800)]
net: hns3: change the method of getting cmd index in debugfs
Currently, the cmd index is obtained in debugfs by comparing file names.
However, this method may cause errors when processing more complex file
names. So, change this method by saving cmd in private data and comparing
it when getting cmd index in debugfs for optimization.
Fixes: 9ac2271d66e1 ("net: hns3: refactor the debugfs process") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guojia Liao [Thu, 26 Aug 2021 11:21:58 +0000 (19:21 +0800)]
net: hns3: fix duplicate node in VLAN list
VLAN list should not be added duplicate VLAN node, otherwise it would
cause "add failed" when restore VLAN from VLAN list, so this patch adds
VLAN ID check before adding node into VLAN list.
Fixes: bbafec232ed3 ("net: hns3: Record VF vlan tables") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yonglong Liu [Thu, 26 Aug 2021 11:21:57 +0000 (19:21 +0800)]
net: hns3: fix speed unknown issue in bond 4
In bond 4, when the link goes down and up repeatedly, the bond may get an
unknown speed, and then this port can not work.
The driver notify netif_carrier_on() before update the link state, when the
bond receive carrier on, will query the speed of the port, if the query
operation happens before updating the link state, will get an unknown
speed. So need to notify netif_carrier_on() after update the link state.
Yufeng Mo [Thu, 26 Aug 2021 11:21:56 +0000 (19:21 +0800)]
net: hns3: add waiting time before cmdq memory is released
After the cmdq registers are cleared, the firmware may take time to
clear out possible left over commands in the cmdq. Driver must release
cmdq memory only after firmware has completed processing of left over
commands.
Fixes: c715a992e673 ("net: hns3: uninitialize command queue while unloading PF driver") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yufeng Mo [Thu, 26 Aug 2021 11:21:55 +0000 (19:21 +0800)]
net: hns3: clear hardware resource when loading driver
If a PF is bonded to a virtual machine and the virtual machine exits
unexpectedly, some hardware resource cannot be cleared. In this case,
loading driver may cause exceptions. Therefore, the hardware resource
needs to be cleared when the driver is loaded.
Kyle Tso [Thu, 26 Aug 2021 12:42:01 +0000 (20:42 +0800)]
usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running
If the port is going to send Discover_Identity Message, vdm_sm_running
flag was intentionally set before entering Ready States in order to
avoid the conflict because the port and the port partner might start
AMS at almost the same time after entering Ready States.
However, the original design has a problem. When the port is doing
DR_SWAP from Device to Host, it raises the flag. Later in the
tcpm_send_discover_work, the flag blocks the procedure of sending the
Discover_Identity and it might never be cleared until disconnection.
Since there exists another flag send_discover representing that the port
is going to send Discover_Identity or not, it is enough to use that flag
to prevent the conflict. Also change the timing of the set/clear of
vdm_sm_running to indicate whether the VDM SM is actually running or
not.
Takashi Iwai [Thu, 26 Aug 2021 12:41:27 +0000 (14:41 +0200)]
usb: renesas-xhci: Prefer firmware loading on unknown ROM state
The recent attempt to handle an unknown ROM state in the commit 84ce6cfae44b ("usb: renesas-xhci: Fix handling of unknown ROM state")
resulted in a regression and reverted later by the commit 4753c46704fd
("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"").
The problem of the former fix was that it treated the failure of
firmware loading as a fatal error. Since the firmware files aren't
included in the standard linux-firmware tree, most users don't have
them, hence they got the non-working system after that. The revert
fixed the regression, but also it didn't make the firmware loading
triggered even on the devices that do need it. So we need still a fix
for them.
This is another attempt to handle the unknown ROM state. Like the
previous fix, this also tries to load the firmware when ROM shows
unknown state. In this patch, however, the failure of a firmware
loading (such as a missing firmware file) isn't handled as a fatal
error any longer when ROM has been already detected, but it falls back
to the ROM mode like before. The error is returned only when no ROM
is detected and the firmware loading failed.
Along with it, for simplifying the code flow, the detection and the
check of ROM is factored out from renesas_fw_check_running() and done
in the caller side, renesas_xhci_check_request_fw(). It avoids the
redundant ROM checks.
The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34). Also it
was confirmed that no regression is seen on another Thinkpad T14
machine that has worked without the patch, too.
Wesley Cheng [Wed, 25 Aug 2021 04:28:55 +0000 (21:28 -0700)]
usb: dwc3: gadget: Stop EP0 transfers during pullup disable
During a USB cable disconnect, or soft disconnect scenario, a pending
SETUP transaction may not be completed, leading to the following
error:
dwc3 a600000.dwc3: timed out waiting for SETUP phase
If this occurs, then the entire pullup disable routine is skipped and
proper cleanup and halting of the controller does not complete.
Instead of returning an error (which is ignored from the UDC
perspective), allow the pullup disable routine to continue, which
will also handle disabling of EP0/1. This will end any active
transfers as well. Ensure to clear any delayed_status also, as the
timeout could happen within the STATUS stage.
Fixes: 3716f478f182 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: <stable@vger.kernel.org> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Mon, 23 Aug 2021 21:41:27 +0000 (23:41 +0200)]
Merge tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux into arm/fixes
Reset controller fixes for v5.14
Hide the Sparx5 reset driver unless the ARCH_SPARX5 or COMPILE_TEST
options are enabled, to avoid unnecessarily asking users about this
driver. Fix a return value argument type in the ZynqMP reset driver.
* tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux:
reset: reset-zynqmp: Fixed the argument data type
reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5
Thinh Nguyen [Thu, 19 Aug 2021 01:17:03 +0000 (03:17 +0200)]
usb: dwc3: gadget: Fix dwc3_calc_trbs_left()
We can't depend on the TRB's HWO bit to determine if the TRB ring is
"full". A TRB is only available when the driver had processed it, not
when the controller consumed and relinquished the TRB's ownership to the
driver. Otherwise, the driver may overwrite unprocessed TRBs. This can
happen when many transfer events accumulate and the system is slow to
process them and/or when there are too many small requests.
If a request is in the started_list, that means there is one or more
unprocessed TRBs remained. Check this instead of the TRB's HWO bit
whether the TRB ring is full.
Swati Sharma [Thu, 12 Aug 2021 13:11:07 +0000 (18:41 +0530)]
drm/i915/dp: Drop redundant debug print
drm_dp_dpcd_read/write already has debug error message.
Drop redundant error messages which gives false
status even if correct value is read in drm_dp_dpcd_read().
v2: -Added fixes tag (Ankit)
v3: -Fixed build error (CI)
Fixes: db557f0d8847 ("drm/i915: Add support for enabling link status and recovery") Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v5.12+ Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Swati Sharma <swati2.sharma@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210812131107.5531-1-swati2.sharma@intel.com
(cherry picked from commit b6dfa416172939edaa46a5a647457b94c6d94119) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Matthew Brost [Fri, 30 Jul 2021 19:53:42 +0000 (12:53 -0700)]
drm/i915: Fix syncmap memory leak
A small race exists between intel_gt_retire_requests_timeout and
intel_timeline_exit which could result in the syncmap not getting
free'd. Rather than work to hard to seal this race, simply cleanup the
syncmap on fini.
This is because in cipso_v4_doi_free() there is no check
on 'doi_def->map.std' when 'doi_def->type' equal 1, which
is possibe, since netlbl_cipsov4_add_std() haven't initialize
it before alloc 'doi_def->map.std'.
This patch just add the check to prevent panic happen for similar
cases.
Reported-by: Abaci <abaci@linux.alibaba.com> Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrey Ignatov [Thu, 26 Aug 2021 00:25:40 +0000 (17:25 -0700)]
rtnetlink: Return correct error on changing device netns
Currently when device is moved between network namespaces using
RTM_NEWLINK message type and one of netns attributes (FLA_NET_NS_PID,
IFLA_NET_NS_FD, IFLA_TARGET_NETNSID) but w/o specifying IFLA_IFNAME, and
target namespace already has device with same name, userspace will get
EINVAL what is confusing and makes debugging harder.
Fix it so that userspace gets more appropriate EEXIST instead what makes
debugging much easier.
Before:
# ./ifname.sh
+ ip netns add ns0
+ ip netns exec ns0 ip link add l0 type dummy
+ ip netns exec ns0 ip link show l0
8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 66:90:b5:d5:78:69 brd ff:ff:ff:ff:ff:ff
+ ip link add l0 type dummy
+ ip link show l0
10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 6e:c6:1f:15:20:8d brd ff:ff:ff:ff:ff:ff
+ ip link set l0 netns ns0
RTNETLINK answers: Invalid argument
After:
# ./ifname.sh
+ ip netns add ns0
+ ip netns exec ns0 ip link add l0 type dummy
+ ip netns exec ns0 ip link show l0
8: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 1e:4a:72:e3:e3:8f brd ff:ff:ff:ff:ff:ff
+ ip link add l0 type dummy
+ ip link show l0
10: l0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether f2:fc:fe:2b:7d:a6 brd ff:ff:ff:ff:ff:ff
+ ip link set l0 netns ns0
RTNETLINK answers: File exists
The problem is that do_setlink() passes its `char *ifname` argument,
that it gets from a caller, to __dev_change_net_namespace() as is (as
`const char *pat`), but semantics of ifname and pat can be different.
, i.e. do_setlink() gets ifname pointer that is always valid no matter
if user specified IFLA_IFNAME or not and then do_setlink() passes this
ifname pointer as is to __dev_change_net_namespace() as pat argument.
But the pat (pattern) in __dev_change_net_namespace() is used as:
net/core/dev.c
11198 err = -EEXIST;
11199 if (__dev_get_by_name(net, dev->name)) {
11200 /* We get here if we can't use the current device name */
11201 if (!pat)
11202 goto out;
11203 err = dev_get_valid_name(net, dev, pat);
11204 if (err < 0)
11205 goto out;
11206 }
As the result the `goto out` path on line 11202 is neven taken and
instead of returning EEXIST defined on line 11198,
__dev_change_net_namespace() returns an error from dev_get_valid_name()
and this, in turn, will be EINVAL for ifname[0] = '\0' set earlier.
Fixes: 80254f791b57 ("[NET]: netlink support for moving devices between network namespaces.") Signed-off-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Traffic schedules can only be started up to eight seconds within the
future. Therefore, the driver periodically checks every two seconds whether the
admin base time provided by the user is inside that window. If so the schedule
is started. Otherwise the check is deferred.
However, according to the programming manual the look ahead window size should
be four - not eight - seconds. By using the proposed value of four seconds
starting a schedule at a specified admin base time actually works as expected.
Fixes: 79489331cc7d ("net: dsa: hellcreek: Add TAPRIO offloading support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kurt Kanzenbach [Wed, 25 Aug 2021 13:58:12 +0000 (15:58 +0200)]
net: dsa: hellcreek: Fix incorrect setting of GCL
Currently the gate control list which is programmed into the hardware is
incorrect resulting in wrong traffic schedules. The problem is the loop
variables are incremented before they are referenced. Therefore, move the
increment to the end of the loop.
Fixes: 79489331cc7d ("net: dsa: hellcreek: Add TAPRIO offloading support") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rahul Lakkireddy [Wed, 25 Aug 2021 21:29:42 +0000 (02:59 +0530)]
cxgb4: dont touch blocked freelist bitmap after free
When adapter init fails, the blocked freelist bitmap is already freed
up and should not be touched. So, move the bitmap zeroing closer to
where it was successfully allocated. Also handle adapter init failure
unwind path immediately and avoid setting up RDMA memory windows.
Fixes: d85f624f2f85 ("cxgb4: Add debugfs facility to inject FL starvation") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 25 Aug 2021 23:17:29 +0000 (16:17 -0700)]
ipv4: use siphash instead of Jenkins in fnhe_hashfun()
A group of security researchers brought to our attention
the weakness of hash function used in fnhe_hashfun().
Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.
Also remove the inline keyword, this really is distracting.
Fixes: 389806896e25 ("ipv4: harden fnhe_hashfun()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 25 Aug 2021 23:17:28 +0000 (16:17 -0700)]
ipv6: use siphash in rt6_exception_hash()
A group of security researchers brought to our attention
the weakness of hash function used in rt6_exception_hash()
Lets use siphash instead of Jenkins Hash, to considerably
reduce security risks.
Following patch deals with IPv4.
Fixes: 198b618bc393 ("ipv6: introduce a hash table to store dst cache") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'usb-serial-5.14-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.14-rc8
Here's a fix for a regression in 5.14 (also backported to stable) which
caused reads to stall for ch341 devices.
Included is also a new modem device id.
All but the revert have been in linux-next, and with no reported issues.
* tag 'usb-serial-5.14-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
Revert "USB: serial: ch341: fix character loss at high transfer rates"
USB: serial: option: add new VID/PID to support Fibocom FG150
Colin Ian King [Tue, 6 Jul 2021 11:45:53 +0000 (12:45 +0100)]
perf/x86/intel/uncore: Fix integer overflow on 23 bit left shift of a u32
The u32 variable pci_dword is being masked with 0x1fffffff and then left
shifted 23 places. The shift is a u32 operation,so a value of 0x200 or
more in pci_dword will overflow the u32 and only the bottow 32 bits
are assigned to addr. I don't believe this was the original intent.
Fix this by casting pci_dword to a resource_size_t to ensure no
overflow occurs.
Note that the mask and 12 bit left shift operation does not need this
because the mask SNR_IMC_MMIO_MEM0_MASK and shift is always a 32 bit
value.
Fixes: 9206f7a55359 ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Addresses-Coverity: ("Unintentional integer overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20210706114553.28249-1-colin.king@canonical.com
Stefan Mätje [Wed, 25 Aug 2021 21:52:27 +0000 (23:52 +0200)]
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
This patch fixes the interchanged fetch of the CAN RX and TX error
counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter
is really in struct rx_msg::data[2] and the TX error counter is in
struct rx_msg::data[3].
Trond Myklebust [Wed, 25 Aug 2021 19:33:14 +0000 (15:33 -0400)]
SUNRPC: Fix XPT_BUSY flag leakage in svc_handle_xprt()...
If the attempt to reserve a slot fails, we currently leak the XPT_BUSY
flag on the socket. Among other things, this make it impossible to close
the socket.
Fixes: 426796a04bab ("SUNRPC: Move svc_xprt_received() call sites") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If offline_pages failed after lru_cache_disable(), it forgot to do
lru_cache_enable() in error path. So we would have lru cache disabled
permanently in this case.
Link: https://lkml.kernel.org/r/20210821094246.10149-3-linmiaohe@huawei.com Fixes: 3b82afd87918 ("mm: disable LRU pagevec during the migration temporarily") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Chris Goldsworthy <cgoldswo@codeaurora.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Osipenko [Mon, 23 Aug 2021 20:24:12 +0000 (23:24 +0300)]
PM: domains: Improve runtime PM performance state handling
GENPD core doesn't support handling performance state changes while
consumer device is runtime-suspended or when runtime PM is disabled.
GENPD core may override performance state that was configured by device
driver while RPM of the device was disabled or device was RPM-suspended.
Let's close that gap by allowing drivers to control performance state
while RPM of a consumer device is disabled and to set up performance
state of RPM-suspended device that will be applied by GENPD core on
RPM-resume of the device.
Fixes: 56ac398db6a0 ("PM: domains: Drop/restore performance state votes for devices at runtime PM") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Tue, 24 Aug 2021 17:39:25 +0000 (10:39 -0700)]
pipe: do FASYNC notifications for every pipe IO, not just state changes
It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.
Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable). User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.
But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).
The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.
This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong. What matters is that it used to work.
So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes. It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.
Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits b5851d88e418 and 532d1e336ad4 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed. Probably because the stress-ng problem case ends up
being timing-dependent too.
It was then unwittingly fixed by commit 1f706f0f5336 ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit 28b12285c52f ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").
And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case. So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.
Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case. FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.
Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/ Fixes: 28b12285c52f ("pipe: avoid unnecessary EPOLLET wakeups under normal loads") Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Oliver Sang <oliver.sang@intel.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 25 Aug 2021 16:56:10 +0000 (09:56 -0700)]
Merge branch 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucount fixes from Eric Biederman:
"This branch fixes a regression that made it impossible to increase
rlimits that had been converted to the ucount infrastructure, and also
fixes a reference counting bug where the reference was not incremented
soon enough.
The fixes are trivial and the bugs have been encountered in the wild,
and the fixes have been tested"
* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Increase ucounts reference counter before the security hook
ucounts: Fix regression preventing increasing of rlimits in init_user_ns
Tuo Li [Thu, 5 Aug 2021 15:14:34 +0000 (08:14 -0700)]
ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
kcalloc() is called to allocate memory for m->m_info, and if it fails,
ceph_mdsmap_destroy() behind the label out_err will be called:
ceph_mdsmap_destroy(m);
In ceph_mdsmap_destroy(), m->m_info is dereferenced through:
kfree(m->m_info[i].export_targets);
To fix this possible null-pointer dereference, check m->m_info before the
for loop to free m->m_info[i].export_targets.
[ jlayton: fix up whitespace damage
only kfree(m->m_info) if it's non-NULL ]
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo Li [Wed, 18 Aug 2021 13:38:42 +0000 (21:38 +0800)]
ceph: correctly handle releasing an embedded cap flush
The ceph_cap_flush structures are usually dynamically allocated, but
the ceph_cap_snap has an embedded one.
When force umounting, the client will try to remove all the session
caps. During this, it will free them, but that should not be done
with the ones embedded in a capsnap.
Fix this by adding a new boolean that indicates that the cap flush is
embedded in a capsnap, and skip freeing it if that's set.
At the same time, switch to using list_del_init() when detaching the
i_list and g_list heads. It's possible for a forced umount to remove
these objects but then handle_cap_flushsnap_ack() races in and does the
list_del_init() again, corrupting memory.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52283 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
[BUG]
It's no longer possible to create compressed inline extent after commit e6fe07a799ca ("btrfs: compression: don't try to compress if we don't
have enough pages").
[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.
- Compressed inline write
The data is always smaller than one sector and the test lacks the
condition to properly recognize a non-inline extent.
- Compressed subpage write
For the incoming subpage compressed write support, we require page
alignment of the delalloc range.
And for 64K page size, we can compress just one page into smaller
sectors.
For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback. The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.
[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Link: https://lore.kernel.org/linux-btrfs/afa2742.c084f5d6.17b6b08dffc@tnonline.net Fixes: e6fe07a799ca ("btrfs: compression: don't try to compress if we don't have enough pages") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
This appears to be because dma_map_resource() is being called for a
physical address which does not correspond to a memory address yet does
have a valid 'struct page' due to the way in which the vmemmap is
constructed.
Prior to fc48850c2cbf ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), the arm64
implementation of pfn_valid() called memblock_is_memory() to return
'false' for such regions and the DMA mapping request would proceed.
However, now that we are using the generic implementation where only the
presence of the memory map entry is considered, we return 'true' and
erroneously fail with DMA_MAPPING_ERROR because we identify the region
as DRAM.
Although fixing this in the DMA mapping code is arguably the right fix,
it is a risky, cross-architecture change at this stage in the cycle. So
just revert arm64 back to its old pfn_valid() implementation for v5.14.
The change to the generic pfn_valid() code is preserved from the original
patch, so as to avoid impacting other architectures.
Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Christoph Hellwig <hch@lst.de> Reported-by: Alex Bee <knaerzche@gmail.com> Link: https://lore.kernel.org/r/d3a3c828-b777-faf8-e901-904995688437@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
When the change() function decreases the value of 'nstrict', we must take
into account that packets might be already enqueued on a class that flips
from 'strict' to 'quantum': otherwise that class will not be added to the
bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to
do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer
dereference.
For classes flipping from 'strict' to 'quantum', initialize an empty list
and eventually add it to the bandwidth-sharing list, if there are packets
already enqueued. In this way, the kernel will:
a) prevent crashing as described above.
b) avoid retaining the backlog packets (for an arbitrarily long time) in
case no packet is enqueued after a change from 'strict' to 'quantum'.
Reported-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: f9fbb33d03ce ("net: sch_ets: Add a new Qdisc") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Shai Malin [Tue, 24 Aug 2021 16:52:49 +0000 (19:52 +0300)]
qede: Fix memset corruption
Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 119f4083e5a0 ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Song Yoong Siang [Wed, 25 Aug 2021 00:55:29 +0000 (08:55 +0800)]
net: stmmac: fix kernel panic due to NULL pointer dereference of xsk_pool
After free xsk_pool, there is possibility that napi polling is still
running in the middle, thus causes a kernel crash due to kernel NULL
pointer dereference of rx_q->xsk_pool and tx_q->xsk_pool.
Fix this by changing the XDP pool setup sequence to:
1. disable napi before free xsk_pool
2. enable napi after init xsk_pool
The following kernel panic is observed without this patch:
Fixes: 119f4083e5a0 ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Harini Katakam [Tue, 24 Aug 2021 10:02:09 +0000 (15:32 +0530)]
net: macb: Add a NULL check on desc_ptp
macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 6a663c0fb6cd26506a479907226c0f4e58212215
"net: stmmac: dwmac-rk: add pd_gmac support for rk3399" and fixes
unbalanced pm_runtime_enable warnings.
In the commit to be reverted, support for power management was
introduced to the Rockchip glue code. Later, power management support
was introduced to the stmmac core code, resulting in multiple
invocations of pm_runtime_{enable,disable,get_sync,put_sync}.
The multiple invocations happen in rk_gmac_powerup and
stmmac_{dvr_probe, resume} as well as in rk_gmac_powerdown and
stmmac_{dvr_remove, suspend}, respectively, which are always called
in conjunction.
Fixes: 65c2abbd92584c93861fd26c900131faefd1e191 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: David S. Miller <davem@davemloft.net>
These devices do not appear to send a zero-length packet when the
transfer size is a multiple of the bulk-endpoint max-packet size. This
means that incoming data may not be processed by the driver until a
short packet is received or the receive buffer is full.
Revert back to using endpoint-sized receive buffers to avoid stalled
reads.
Bin Meng [Wed, 4 Aug 2021 12:30:14 +0000 (20:30 +0800)]
riscv: dts: microchip: Use 'local-mac-address' for emac1
Per the DT spec, 'local-mac-address' is used to specify MAC address
that was assigned to the network device, while 'mac-address' is used
to specify the MAC address that was last used by the boot program,
and shall be used only if the value differs from 'local-mac-address'
property value.
Vincent Chen [Tue, 3 Aug 2021 09:27:51 +0000 (17:27 +0800)]
riscv: Ensure the value of FP registers in the core dump file is up to date
The value of FP registers in the core dump file comes from the
thread.fstate. However, kernel saves the FP registers to the thread.fstate
only before scheduling out the process. If no process switch happens
during the exception handling process, kernel will not have a chance to
save the latest value of FP registers to thread.fstate. It will cause the
value of FP registers in the core dump file may be incorrect. To solve this
problem, this patch force lets kernel save the FP register into the
thread.fstate if the target task_struct equals the current.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Fixes: fb5c22923883 ("RISC-V: Add FP register ptrace support for gdb.") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
blk_mq_run_hw_queues
^^^^^^ dispatch IO, q_usage_counter will reduce to zero
blk_mq_unfreeze_queue
^^^^^ mq_freeze_depth--
To fix this, we need to run queue before rescanning device when the device
state changes to SDEV_RUNNING.
Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: 67f91b6eb9fb ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche [Tue, 24 Aug 2021 17:05:20 +0000 (10:05 -0700)]
mq-deadline: Fix request accounting
The block layer may call the I/O scheduler .finish_request() callback
without having called the .insert_requests() callback. Make sure that the
mq-deadline I/O statistics are correct if the block layer inserts an I/O
request that bypasses the I/O scheduler. This patch prevents that lower
priority I/O is delayed longer than necessary for mixed I/O priority
workloads.
Linus Torvalds [Tue, 24 Aug 2021 16:55:50 +0000 (09:55 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several small fixes, the first three are significant:
- mlx5 crash unloading drivers with a rare HW config
- missing userspace reporting for the new dmabuf objects
- random rxe failure due to missing memory zeroing
- static checker/etc reports: missing spin lock init, null pointer
deref on error, extra unlock on error path, memory allocation under
spinlock, missing IRQ vector cleanup
- kconfig typo in the new irdma driver"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/rxe: Zero out index member of struct rxe_queue
RDMA/efa: Free IRQ vectors on error flow
RDMA/rxe: Fix memory allocation while in a spin lock
RDMA/bnxt_re: Remove unpaired rtnl unlock in bnxt_re_dev_init()
IB/hfi1: Fix possible null-pointer dereference in _extend_sdma_tx_descs()
RDMA/irdma: Use correct kconfig symbol for AUXILIARY_BUS
RDMA/bnxt_re: Add missing spin lock initialization
RDMA/uverbs: Track dmabuf memory regions
RDMA/mlx5: Fix crash when unbind multiport slave
projects / kernel.git / log