Bart Van Assche [Fri, 23 Feb 2018 22:09:25 +0000 (14:09 -0800)]
Revert "IB/srp: Avoid that a cable pull can trigger a kernel crash"
The caller of srp_ib_lookup_path() is responsible for holding a reference
on the SCSI host. That means that commit 8a0d18c62121 was not necessary.
Hence revert it.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Bart Van Assche [Fri, 23 Feb 2018 22:09:24 +0000 (14:09 -0800)]
IB/srp: Fix srp_abort()
Before commit e494f6a72839 ("[SCSI] improved eh timeout handler") it
did not really matter whether or not abort handlers like srp_abort()
called .scsi_done() when returning another value than SUCCESS. Since
that commit however this matters. Hence only call .scsi_done() when
returning SUCCESS.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Arnd Bergmann [Tue, 20 Feb 2018 20:56:27 +0000 (21:56 +0100)]
infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks
On 32-bit targets, we otherwise get a warning about an impossible constant
integer expression:
In file included from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/ib_verbs.c:39:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function 'bnxt_re_query_device':
include/linux/bitops.h:7:24: error: left shift count >= width of type [-Werror=shift-count-overflow]
#define BIT(nr) (1UL << (nr))
^~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:61:34: note: in expansion of macro 'BIT'
#define BNXT_RE_MAX_MR_SIZE_HIGH BIT(39)
^~~
drivers/infiniband/hw/bnxt_re/bnxt_re.h:62:30: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE_HIGH'
#define BNXT_RE_MAX_MR_SIZE BNXT_RE_MAX_MR_SIZE_HIGH
^~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/ib_verbs.c:149:25: note: in expansion of macro 'BNXT_RE_MAX_MR_SIZE'
ib_attr->max_mr_size = BNXT_RE_MAX_MR_SIZE;
^~~~~~~~~~~~~~~~~~~
Fixes: 872f3578241d ("RDMA/bnxt_re: Add support for MRs with Huge pages") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Arnd Bergmann [Tue, 20 Feb 2018 20:56:26 +0000 (21:56 +0100)]
infiniband: qplib_fp: fix pointer cast
Building for a 32-bit target results in a couple of warnings from casting
between a 32-bit pointer and a 64-bit integer:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_service_nq':
drivers/infiniband/hw/bnxt_re/qplib_fp.c:333:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
bnxt_qplib_arm_srq((struct bnxt_qplib_srq *)q_handle,
^
drivers/infiniband/hw/bnxt_re/qplib_fp.c:336:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
(struct bnxt_qplib_srq *)q_handle,
^
In file included from include/linux/byteorder/little_endian.h:5,
from arch/arm/include/uapi/asm/byteorder.h:22,
from include/asm-generic/bitops/le.h:6,
from arch/arm/include/asm/bitops.h:342,
from include/linux/bitops.h:38,
from include/linux/kernel.h:11,
from include/linux/interrupt.h:6,
from drivers/infiniband/hw/bnxt_re/qplib_fp.c:39:
drivers/infiniband/hw/bnxt_re/qplib_fp.c: In function 'bnxt_qplib_create_srq':
include/uapi/linux/byteorder/little_endian.h:31:43: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
^
include/linux/byteorder/generic.h:86:21: note: in expansion of macro '__cpu_to_le64'
#define cpu_to_le64 __cpu_to_le64
^~~~~~~~~~~~~
drivers/infiniband/hw/bnxt_re/qplib_fp.c:569:19: note: in expansion of macro 'cpu_to_le64'
req.srq_handle = cpu_to_le64(srq);
Using a uintptr_t as an intermediate works on all architectures.
Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Feb 2018 10:18:39 +0000 (12:18 +0200)]
IB/uverbs: Tidy uverbs_uobject_add
Maintaining the uobjects list is mandatory, hoist it into the common
rdma_alloc_commit_uobject() function and inline it as there is now
only one caller.
Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Doug Ledford [Wed, 28 Feb 2018 18:37:39 +0000 (13:37 -0500)]
Merge tag 'mlx5-updates-2018-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next
mlx5-update-2018-02-23 (IB representors)
From: Mark Bloch <markb@mellanox.com>
=========
Add IB representor when in switchdev mode
The following series adds support for an IB (RAW Ethernet only) device
representor which is created when the user switches to switchdev mode.
Today when switching to switchdev mode the only representors which are
created are net devices. Each netdev is a representor of a virtual
function and any data sent via the representor is received on the virtual
function, and any data sent via the virtual function is received by the
representor.
For the mlx5 driver the main use of this functionality is to be able to
use Open vSwitch on the hypervisor in order to manage/control traffic
from/to the virtual functions. Open vSwitch can also work with DPDK
devices and not just net devices, this series exposes an IB device, which
Mellanox PMD driver uses, which then can be used by Open vSwitch DPDK.
An IB device representor exposes only RAW Ethernet QP capabilities and
the ability to create flow rules to direct traffic to its RX queues. The
state of the IB device (ACTIVE/DOWN etc..) is based on the state of the
corresponding net device representor. No other RDMA/RoCE functionality is
currently supported and no GID table is exposed.
=========
Mark Bloch [Mon, 15 Jan 2018 13:11:37 +0000 (13:11 +0000)]
IB/mlx5: Disable self loopback check when in switchdev mode
When in switchdev mode, there is no need to do self loopback checks
as we can't receive those packets, we insert steering rules to the
eswitch that make sure packets can't be looped back.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 23 Jan 2018 11:24:13 +0000 (11:24 +0000)]
net/mlx5: E-Switch, Reload IB interface when switching devlink modes
Up until this point it wasn't possible to activate IB representors
when switching to switchdev mode, remove this limitation.
We trigger reload of the PF IB interface in order to make sure that
already allocated resources are invalid and new resources will be opened
correctly with all the limitations of switchdev mode applied (only raw
packet capabilities, without RoCE). We also move the remove/add to a
place where the E-Switch mode is set/unset to better control when to
trigger this action, this will allow the IB side to start in the correct
mode.
For better code reuse, create a function which reloads an interface and
export it.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 23 Jan 2018 11:16:30 +0000 (11:16 +0000)]
IB/mlx5: Add proper representors support
This commit adds full support for IB representor:
1) Representors profile, We add two new profiles:
nic_rep_profile - This profile will be used to create an IB device that
represents the PF/UPLINK.
rep_profile - This profile will be used to create an IB device that
represents VFs. Each VF will be its own representor.
2) Proper load/unload callbacks, Those are called by the E-Switch when
moving to/from switchdev mode.
3) Different flow DB handling for when we in switchdev mode.
Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Mon, 29 Jan 2018 10:40:37 +0000 (10:40 +0000)]
IB/mlx5: E-Switch, Add rule to forward traffic to vport
In order to forward traffic from representor's SQ to the right virtual
function, every time an SQ is created also add the corresponding flow rule
to the FDB.
Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Mon, 22 Jan 2018 15:29:44 +0000 (15:29 +0000)]
IB/mlx5: Don't expose MR cache in switchdev mode
When enabling many VFs and switching to switchdev mode, the total amount
of mkeys we try to allocate when loading representors is very large and
may cause timeouts on allocations, the same issues was observed on VFs
and we employ the same fix that was done for them. We avoid allocating
the full MR cache on load but still allow it to be manipulated once the
IB device is loaded.
Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Mon, 6 Nov 2017 12:22:13 +0000 (12:22 +0000)]
IB/mlx5: When in switchdev mode, expose only raw packet capabilities
Currently in switchdev mode we allow only for raw packet QPs.
Expose the right capabilities and set the gid table length to 0, also
make sure we don't try to enable RoCE, so split the function
to enable RoCE so representors can enable only the notifier needed for
net device events.
Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 16 Jan 2018 15:02:36 +0000 (15:02 +0000)]
IB/mlx5: Listen to netdev register/unresiter events in switchdev mode
Currently we listen to netdev register/unregister event based on PCI
device. When in switchdev mode PF and representors share the same PCI
device, so in order to pair ib device and netdev in switchdev mode
compare the netdev that triggered the event to that of the representor.
Expose a function that lets you receive the netdev associated what
a given representor.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 16 Jan 2018 14:44:29 +0000 (14:44 +0000)]
IB/mlx5: Add match on vport when in switchdev mode
When we point to a representor, it means we are in switchdev mode.
The flow db is shared between PF and virtual function representors
so each rule created needs to have a match on its specific source port.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 16 Jan 2018 14:42:35 +0000 (14:42 +0000)]
IB/mlx5: Allocate flow DB only on PF IB device
A flow DB is a shared resource between PF and representors,
need to allocate it only when creating the PF IB device.
Once we add IB representors, they will use the flow db which was
created by the PF.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Create the basic infrastructure of registering and unregistering
IB representors. The load/unload callbacks are left empty and
proper implementation will be introduced in following patches.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 16 Jan 2018 14:13:46 +0000 (14:13 +0000)]
net/mlx5: E-Switch, Add definition of IB representor
Create a new representor type: REP_IB. which will be initialized by an IB
device that is used as a logical representor of a eswitch vport (VF or
uplink) just like we have a net device today in switchdev mode.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 30 Jan 2018 10:46:34 +0000 (10:46 +0000)]
net/mlx5: E-Switch, Optimize HW steering tables in switchdev mode
Under switchdev mode we insert an eswitch miss rule causing any
unmatched traffic to be sent towards the PF vport. This miss rule can
be optimized if we break it to two, one case is for multicast traffic and
the other for unicast.
Breaking the miss rule into two (unicast and multicast) allows the firmware
to program the hardware in a more efficient way.
Using ConncetX-5 Ex with IXIA and testpmd (which use IB representors):
IXIA -> NIC -> PF -> IB representor -> NIC -> VF:
- Without this optimization: 9.2 MPPS.
- With this optimization: 18 MPPS.
VF -> NIC -> IB representor-> PF -> NIC -> IXIA:
- Without this optimization: 17 MPPS.
- With this optimization: 23.4 MPPS.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 23 Jan 2018 11:19:12 +0000 (11:19 +0000)]
net/mlx5: E-Switch, Increase number of FTEs in FDB in switchdev mode
The max FTE number should be the max number of SQs that can be opened.
Ethernet representors open one SQ each. Once we add IB representor this
will increase (depends on the user). For now lets start with 31
per IB representor and if needed increase in the future.
This increase only affects the number of FTEs in the slow path FDB,
offloaded rules (done via TC on the fast path portion of the FDB)
aren't affected.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Mark Bloch [Tue, 16 Jan 2018 14:04:14 +0000 (14:04 +0000)]
net/mlx5: E-Switch, Move representors definition to a global scope
In preparation for IB representors, move representors structs to a global
scope, also expose functions needed for registration, unregistration,
eswitch mode and creating a flow rule to direct traffic from SQs to the
right VF.
Signed-off-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Leon Romanovsky [Wed, 21 Feb 2018 16:12:42 +0000 (18:12 +0200)]
RDMA/uverbs: Replace user's types with kernel's types
The internal to kernel variable declarations don't need to be
declared with user types. This patch converts such occurrences
appeared in ib_uverbs_write().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
and IB_USER_VERBS_CMD_CREATE_CQ <= IB_USER_VERBS_CMD_OPEN_QP,
so if we execute IB_USER_VERBS_EX_CMD_CREATE_CQ this code checks
ib_dev->uverbs_cmd_mask not ib_dev->uverbs_ex_cmd_mask.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Wed, 21 Feb 2018 16:12:36 +0000 (18:12 +0200)]
RDMA/uverbs: Unify return values of not supported command
The non-existing command is supposed to return -EOPNOTSUPP, but the
current code returns different errors for different flows for the
same failure. This patch unifies those flows.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Leon Romanovsky [Wed, 21 Feb 2018 16:12:33 +0000 (18:12 +0200)]
RDMA/uverbs: Refactor flags checks and update return value
Since commit f21519b23c1b ("IB/core: extended command: an
improved infrastructure for uverbs commands"), the uverbs
supports extra flags as an input to the command interface.
However actually, there is only one flag available and used,
so it is better to refactor the code, so the resolution and
report to the users is done as early as possible.
As part of this change, we changed the return value of failure case
from ENOSYS to be EINVAL to be consistent with the rest flags checks.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Doug Ledford [Fri, 23 Feb 2018 03:27:20 +0000 (22:27 -0500)]
Merge branch 'k.o/for-rc' into k.o/wip/dl-for-next
There is a 14 patch series waiting to come into for-next that has a
dependecy on code submitted into this kernel's for-rc series. So, merge
the for-rc branch into the current for-next in order to make the patch
series apply cleanly.
Doug Ledford [Fri, 23 Feb 2018 01:52:28 +0000 (20:52 -0500)]
Merge tag 'mlx5-updates-2018-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into k.o/wip/dl-for-next
mlx5-updates-2018-02-21
This series includes shared code updates for mlx5 core driver for both
netdev and rdma subsystems.
By Saeed,
First six patches of the series are meant to address a performance issue
and should provide a performance boost for multi core IRQ interrupt hungry
workloads. The issue is fixed in the first patch, all other patches are
meant to refactor the code in light of this fix.
The problem it comes to fix, is a shared spinlock accessed across all HCA
IRQs which protects the CQ database. To solve this we simply move the CQ
database and its spinlock to be per EQ (IRQ), thus per core.
By Yonatan,
Fragmented completion queue (CQ) for RDMA,
core driver implementation to create fragmented CQ buffers rather than
one large contiguous memory buffer, the implementation scheme already
exist and used by the netdev CQs, the patch shares that code with the
rdma CQ creation flow and makes use of the new API in mlx5_ib driver.
Thanks,
Saeed.
Merged into rdma-next tree as well as net-next tree to prevent conflicts
in future patches between the two trees.
Leon Romanovsky [Wed, 21 Feb 2018 08:25:01 +0000 (10:25 +0200)]
RDMA/uverbs: Fix kernel panic while using XRC_TGT QP type
Attempt to modify XRC_TGT QP type from the user space (ibv_xsrq_pingpong
invocation) will trigger the following kernel panic. It is caused by the
fact that such QPs missed uobject initialization.
Selvin Xavier [Fri, 16 Feb 2018 05:20:13 +0000 (21:20 -0800)]
RDMA/bnxt_re: Avoid system hang during device un-reg
BNXT_RE_FLAG_TASK_IN_PROG doesn't handle multiple work
requests posted together. Track schedule of multiple
workqueue items by maintaining a per device counter
and proceed with IB dereg only if this counter is zero.
flush_workqueue is no longer required from
NETDEV_UNREGISTER path.
Selvin Xavier [Fri, 16 Feb 2018 05:20:12 +0000 (21:20 -0800)]
RDMA/bnxt_re: Fix system crash during load/unload
During driver unload, the driver proceeds with cleanup
without waiting for the scheduled events. So the device
pointers get freed up and driver crashes when the events
are scheduled later.
Flush the bnxt_re_task work queue before starting
device removal.
Steve Wise [Thu, 15 Feb 2018 02:43:36 +0000 (18:43 -0800)]
RDMA/restrack: don't use uaccess_kernel()
uaccess_kernel() isn't sufficient to determine if an rdma resource is
user-mode or not. For example, resources allocated in the add_one()
function of an ib_client get falsely labeled as user mode, when they
are kernel mode allocations. EG: mad qps.
The result is that these qps are skipped over during a nldev query
because of an erroneous namespace mismatch.
So now we determine if the resource is user-mode by looking at the object
struct's uobject or similar pointer to know if it was allocated for user
mode applications.
Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ensure that cv_end is equal to ibdev->num_comp_vectors for the
NUMA node with the highest index. This patch improves spreading
of RDMA channels over completion vectors and thereby improves
performance, especially on systems with only a single NUMA node.
This patch drops support for the comp_vector login parameter by
ignoring the value of that parameter since I have not found a
good way to combine support for that parameter and automatic
spreading of RDMA channels over completion vectors.
Fixes: d92c0da71a35 ("IB/srp: Add multichannel support") Reported-by: Alexander Schmid <alex@modula-shop-systems.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Alexander Schmid <alex@modula-shop-systems.de> Cc: stable@vger.kernel.org Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adit Ranadive [Thu, 15 Feb 2018 20:36:46 +0000 (12:36 -0800)]
RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file
This ensures that we return the right structures back to userspace.
Otherwise, it looks like the reserved fields in the response structures
in userspace might have uninitialized data in them.
Leon Romanovsky [Wed, 14 Feb 2018 10:35:40 +0000 (12:35 +0200)]
RDMA/uverbs: Sanitize user entered port numbers prior to access it
==================================================================
BUG: KASAN: use-after-free in copy_ah_attr_from_uverbs+0x6f2/0x8c0
Read of size 4 at addr ffff88006476a198 by task syzkaller697701/265
Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd3c7904db6e ("IB/core: Change idr objects to use the new schema") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Wed, 14 Feb 2018 10:35:38 +0000 (12:35 +0200)]
RDMA/uverbs: Fix bad unlock balance in ib_uverbs_close_xrcd
There is no matching lock for this mutex. Git history suggests this is
just a missed remnant from an earlier version of the function before
this locking was moved into uverbs_free_xrcd.
Originally this lock was protecting the xrcd_table_delete()
=====================================
WARNING: bad unlock balance detected!
4.15.0+ #87 Not tainted
-------------------------------------
syzkaller223405/269 is trying to release lock (&uverbs_dev->xrcd_tree_mutex) at:
[<00000000b8703372>] ib_uverbs_close_xrcd+0x195/0x1f0
but there are no more locks to release!
other info that might help us debug this:
1 lock held by syzkaller223405/269:
#0: (&uverbs_dev->disassociate_srcu){....}, at: [<000000005af3b960>] ib_uverbs_write+0x265/0xef0
Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd3c7904db6e ("IB/core: Change idr objects to use the new schema") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Wed, 14 Feb 2018 10:35:37 +0000 (12:35 +0200)]
RDMA/restrack: Increment CQ restrack object before committing
Once the uobj is committed it is immediately possible another thread
could destroy it, which worst case, can result in a use-after-free
of the restrack objects.
Cc: syzkaller <syzkaller@googlegroups.com> Fixes: 08f294a1524b ("RDMA/core: Add resource tracking for create and destroy CQs") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Tue, 13 Feb 2018 10:18:41 +0000 (12:18 +0200)]
RDMA/uverbs: Protect from command mask overflow
The command number is not bounds checked against the command mask before it
is shifted, resulting in an ubsan hit. This does not cause malfunction since
the command number is eventually bounds checked, but we can make this ubsan
clean by moving the bounds check to before the mask check.
Jason Gunthorpe [Tue, 13 Feb 2018 10:18:40 +0000 (12:18 +0200)]
IB/uverbs: Fix unbalanced unlock on error path for rdma_explicit_destroy
If remove_commit fails then the lock is left locked while the uobj still
exists. Eventually the kernel will deadlock.
lockdep detects this and says:
test/4221 is leaving the kernel with locks still held!
1 lock held by test/4221:
#0: (&ucontext->cleanup_rwsem){.+.+}, at: [<000000001e5c7523>] rdma_explicit_destroy+0x37/0x120 [ib_uverbs]
Fixes: 4da70da23e9b ("IB/core: Explicitly destroy an object while keeping uobject") Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Feb 2018 10:18:38 +0000 (12:18 +0200)]
IB/uverbs: Improve lockdep_check
This is really being used as an assert that the expected usecnt
is being held and implicitly that the usecnt is valid. Rename it to
assert_uverbs_usecnt and tighten the checks to only accept valid
values of usecnt (eg 0 and < -1 are invalid).
The tigher checkes make the assertion cover more cases and is more
likely to find bugs via syzkaller/etc.
Fixes: 3832125624b7 ("IB/core: Add support for idr types") Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Tue, 13 Feb 2018 10:18:37 +0000 (12:18 +0200)]
RDMA/uverbs: Protect from races between lookup and destroy of uobjects
The race is between lookup_get_idr_uobject and
uverbs_idr_remove_uobj -> uverbs_uobject_put.
We deliberately do not call sychronize_rcu after the idr_remove in
uverbs_idr_remove_uobj for performance reasons, instead we call
kfree_rcu() during uverbs_uobject_put.
However, this means we can obtain pointers to uobj's that have
already been released and must protect against krefing them
using kref_get_unless_zero.
==================================================================
BUG: KASAN: use-after-free in copy_ah_attr_from_uverbs.isra.2+0x860/0xa00
Read of size 4 at addr ffff88005fda1ac8 by task syz-executor2/441
Memory state around the buggy address: ffff88005fda1980: fc fc fb fb fb fb fc fc fb fb fb fb fc fc fb fb ffff88005fda1a00: fb fb fc fc fb fb fb fb fc fc 00 00 00 00 fc fc ffff88005fda1a80: fb fb fb fb fc fc fb fb fb fb fc fc fb fb fb fb ffff88005fda1b00: fc fc 00 00 00 00 fc fc fb fb fb fb fc fc fb fb ffff88005fda1b80: fb fb fc fc fb fb fb fb fc fc fb fb fb fb fc fc
==================================================================@
Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: 3832125624b7 ("IB/core: Add support for idr types") Reported-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Feb 2018 10:18:36 +0000 (12:18 +0200)]
IB/uverbs: Hold the uobj write lock after allocate
This clarifies the design intention that time between allocate and
commit has the uobj exclusive to the caller. We already guarantee
this by delaying publishing the uobj pointer via idr_insert,
fd_install, list_add, etc.
Additionally holding the usecnt lock during this period provides
extra clarity and more protection against future mistakes.
Fixes: 3832125624b7 ("IB/core: Add support for idr types") Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Tue, 13 Feb 2018 10:18:35 +0000 (12:18 +0200)]
IB/uverbs: Fix possible oops with duplicate ioctl attributes
If the same attribute is listed twice by the user in the ioctl attribute
list then error unwind can cause the kernel to deref garbage.
This happens when an object with WRITE access is sent twice. The second
parse properly fails but corrupts the state required for the error unwind
it triggers.
Fixing this by making duplicates in the attribute list invalid. This is
not something we need to support.
The ioctl interface is currently recommended to be disabled in kConfig.
Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Tue, 13 Feb 2018 10:18:34 +0000 (12:18 +0200)]
IB/uverbs: Add ioctl support for 32bit processes
32 bit processes running on a 64 bit kernel call compat_ioctl so that
implementations can revise any structure layout issues. Point compat_ioctl
at our normal ioctl because:
- All our structures are designed to be the same on 32 and 64 bit, ie we
use __aligned_u64 when required and are careful to manage padding.
- Any pointers are stored in u64's and userspace is expected
to prepare them properly.
Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Feb 2018 10:18:33 +0000 (12:18 +0200)]
IB/uverbs: Use __aligned_u64 for uapi headers
This has no impact on the structure layout since these structs already
have their u64s already properly aligned, but it does document that we
have this requirement for 32 bit compatibility.
Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Feb 2018 10:18:31 +0000 (12:18 +0200)]
IB/uverbs: Use u64_to_user_ptr() not a union
The union approach will get the endianness wrong sometimes if the kernel's
pointer size is 32 bits resulting in EFAULTs when trying to copy to/from
user.
Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Tue, 13 Feb 2018 10:18:30 +0000 (12:18 +0200)]
IB/uverbs: Use inline data transfer for UHW_IN
The rule for the API is pointers less than 8 bytes are inlined into
the .data field of the attribute. Fix the creation of the driver udata
struct to follow this rule and point to the .data itself when the size
is less than 8 bytes.
Otherwise if the UHW struct is less than 8 bytes the driver will get
EFAULT during copy_from_user.
Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Matan Barak [Tue, 13 Feb 2018 10:18:29 +0000 (12:18 +0200)]
IB/uverbs: Always use the attribute size provided by the user
This fixes several bugs around the copy_to/from user path:
- copy_to used the user provided size of the attribute
and could copy data beyond the end of the kernel buffer into
userspace.
- copy_from didn't know the size of the kernel buffer and
could have left kernel memory unexpectedly un-initialized.
- copy_from did not use the user length to determine if the
attribute data is inlined or not.
Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Leon Romanovsky [Tue, 13 Feb 2018 10:18:28 +0000 (12:18 +0200)]
RDMA/restrack: Remove unimplemented XRCD object
Resource tracking of XRCD objects is not implemented in current
version of restrack and hence can be removed.
Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Alaa Hleihel [Tue, 13 Feb 2018 10:18:27 +0000 (12:18 +0200)]
IB/ipoib: Do not warn if IPoIB debugfs doesn't exist
netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event
multiple times until all refs are gone, which will result in calling
ipoib_delete_debug_files multiple times and printing a warning.
Remove the WARN_ONCE since checks of NULL pointers before calling
debugfs_remove are not needed.
Fixes: 771a52584096 ("IB/IPoIB: ibX: failed to create mcg debug file") Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current implementation of create CQ requires contiguous
memory, such requirement is problematic once the memory is
fragmented or the system is low in memory, it causes for
failures in dma_zalloc_coherent().
This patch implements new scheme of fragmented CQ to overcome
this issue by introducing new type: 'struct mlx5_frag_buf_ctrl'
to allocate fragmented buffers, rather than contiguous ones.
Base the Completion Queues (CQs) on this new fragmented buffer.
Saeed Mahameed [Thu, 1 Feb 2018 12:37:07 +0000 (04:37 -0800)]
net/mlx5: Move CQ completion and event forwarding logic to eq.c
Since CQ tree is now per EQ, CQ completion and event forwarding became
specific implementation of EQ logic, this patch moves that logic to eq.c
and makes those functions static.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Gal Pressman <galp@mellanox.com>
Saeed Mahameed [Sat, 20 Jan 2018 00:13:01 +0000 (16:13 -0800)]
net/mlx5: CQ Database per EQ
Before this patch the driver had one CQ database protected via one
spinlock, this spinlock is meant to synchronize between CQ
adding/removing and CQ IRQ interrupt handling.
On a system with large number of CPUs and on a work load that requires
lots of interrupts, this global spinlock becomes a very nasty hotspot
and introduces a contention between the active cores, which will
significantly hurt performance and becomes a bottleneck that prevents
seamless cpu scaling.
To solve this we simply move the CQ database and its spinlock to be per
EQ (IRQ), thus per core.
Andy Shevchenko [Wed, 14 Feb 2018 18:11:17 +0000 (20:11 +0200)]
RDMA/hns: Replace __raw_write*(cpu_to_le*()) with LE write*()
There is no need to repeat the semantics of writel() and similar.
Moreover sparse complains about this:
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1690:22: expected unsigned long long val
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:1690:22: got restricted __le64 <noident>
Fixing this by replacing __raw_write*(cpu_to_le*()) calls by plain
write*() ones.
Note, write*() accessors are little endian by definition.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jason Gunthorpe [Wed, 7 Feb 2018 23:45:51 +0000 (16:45 -0700)]
RDMA: Do not used __packed in uapi headers
__packed is not available in linux/types.h, so we cannot use it in
the uapi headers.
The construction struct ABC {} __packed; may still compile even if
__packed is not defined, however it simply creates a variable called
__packed, and doesn't set the alignment.
All these uses of packed are on structs that already have aligned
members.
While use in hfi may indicate the struct itself is unaligned,
the use in ocrdma is on a UHW struct which should never be unaligned,
so just delete it there.
oulijun [Wed, 7 Feb 2018 09:49:28 +0000 (17:49 +0800)]
RDMA/hns: Fix a bug with modifying mac address
When modifying mac address, it will trigger hns_roce_del_gid
function and can't delete the default gid matched the index
because the attribute of gid is null.
Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Linus Torvalds [Sun, 11 Feb 2018 22:34:03 +0000 (14:34 -0800)]
vfs: do bulk POLL* -> EPOLL* replacement
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 11 Feb 2018 21:57:19 +0000 (13:57 -0800)]
Merge branch 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more poll annotation updates from Al Viro:
"This is preparation to solving the problems you've mentioned in the
original poll series.
After this series, the kernel is ready for running
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
as a for bulk search-and-replace.
After that, the kernel is ready to apply the patch to unify
{de,}mangle_poll(), and then get rid of kernel-side POLL... uses
entirely, and we should be all done with that stuff.
Basically, that's what you suggested wrt KPOLL..., except that we can
use EPOLL... instead - they already are arch-independent (and equal to
what is currently kernel-side POLL...).
After the preparations (in this series) switch to returning EPOLL...
from ->poll() instances is completely mechanical and kernel-side
POLL... can go away. The last step (killing kernel-side POLL... and
unifying {de,}mangle_poll() has to be done after the
search-and-replace job, since we need userland-side POLL... for
unified {de,}mangle_poll(), thus the cherry-pick at the last step.
After that we will have:
- POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of
->poll() still using those will be caught by sparse.
- eventpoll.c and select.c warning-free wrt __poll_t
- no more kernel-side definitions of POLL... - userland ones are
visible through the entire kernel (and used pretty much only for
mangle/demangle)
- same behavior as after the first series (i.e. sparc et.al. epoll(2)
working correctly)"
* 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
annotate ep_scan_ready_list()
ep_send_events_proc(): return result via esed->res
preparation to switching ->poll() to returning EPOLL...
add EPOLLNVAL, annotate EPOLL... and event_poll->event
use linux/poll.h instead of asm/poll.h
xen: fix poll misannotation
smc: missing poll annotations
Linus Torvalds [Sun, 11 Feb 2018 21:52:32 +0000 (13:52 -0800)]
Merge tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2
Pull nios2 update from Ley Foon Tan:
- clean up old Kconfig options from defconfig
- remove leading 0x and 0s from bindings notation in dts files
* tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: defconfig: Cleanup from old Kconfig options
nios2: dts: Remove leading 0x and 0s from bindings notation
Max Filippov [Sun, 11 Feb 2018 09:07:54 +0000 (01:07 -0800)]
xtensa: fix build with KASAN
The commit 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT
usage") removed KASAN_SHADOW_SCALE_SHIFT definition from
include/linux/kasan.h and added it to architecture-specific headers,
except for xtensa. This broke the xtensa build with KASAN enabled.
Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h
Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e212a2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
Linus Torvalds [Sat, 10 Feb 2018 22:05:11 +0000 (14:05 -0800)]
Merge tag 'for-linus-20180210' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes to round off the merge window on the block side:
- a set of bcache fixes by way of Michael Lyle, from the usual bcache
suspects.
- add a simple-to-hook-into function for bpf EIO error injection.
- fix blk-wbt that mischarectized flushes as reads. Improve the logic
so that flushes and writes are accounted as writes, and only reads
as reads. From me.
- fix requeue crash in BFQ, from Paolo"
* tag 'for-linus-20180210' of git://git.kernel.dk/linux-block:
block, bfq: add requeue-request hook
bcache: fix for data collapse after re-attaching an attached device
bcache: return attach error when no cache set exist
bcache: set writeback_rate_update_seconds in range [1, 60] seconds
bcache: fix for allocator and register thread race
bcache: set error_limit correctly
bcache: properly set task state in bch_writeback_thread()
bcache: fix high CPU occupancy during journal
bcache: add journal statistic
block: Add should_fail_bio() for bpf error injection
blk-wbt: account flush requests correctly
Linus Torvalds [Sat, 10 Feb 2018 21:55:33 +0000 (13:55 -0800)]
Merge tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86
Pull x86 platform driver updates from Darren Hart:
"Mellanox fixes and new system type support.
Mostly data for new system types with a correction and an
uninitialized variable fix"
[ Pulling from github because git.infradead.org currently seems to be
down for some reason, but Darren had a backup location - Linus ]
* tag 'platform-drivers-x86-v4.16-3' of git://github.com/dvhart/linux-pdx86:
platform/x86: mlx-platform: Add support for new 200G IB and Ethernet systems
platform/x86: mlx-platform: Add support for new msn201x system type
platform/x86: mlx-platform: Add support for new msn274x system type
platform/x86: mlx-platform: Fix power cable setting for msn21xx family
platform/x86: mlx-platform: Add define for the negative bus
platform/x86: mlx-platform: Use defines for bus assignment
platform/mellanox: mlxreg-hotplug: Fix uninitialized variable
Linus Torvalds [Sat, 10 Feb 2018 21:50:23 +0000 (13:50 -0800)]
Merge tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform
Pull chrome platform updates from Benson Leung:
- move cros_ec_dev to drivers/mfd
- other small maintenance fixes
[ The cros_ec_dev movement came in earlier through the MFD tree - Linus ]
* tag 'chrome-platform-for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform:
platform/chrome: Use proper protocol transfer function
platform/chrome: cros_ec_lpc: Add support for Google Glimmer
platform/chrome: cros_ec_lpc: Register the driver if ACPI entry is missing.
platform/chrome: cros_ec_lpc: remove redundant pointer request
cros_ec: fix nul-termination for firmware build info
platform/chrome: chromeos_laptop: make chromeos_laptop const
Linus Torvalds [Sat, 10 Feb 2018 21:16:35 +0000 (13:16 -0800)]
Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"ARM:
- icache invalidation optimizations, improving VM startup time
- support for forwarded level-triggered interrupts, improving
performance for timers and passthrough platform devices
- a small fix for power-management notifiers, and some cosmetic
changes
PPC:
- add MMIO emulation for vector loads and stores
- allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without
requiring the complex thread synchronization of older CPU versions
- improve the handling of escalation interrupts with the XIVE
interrupt controller
- support decrement register migration
- various cleanups and bugfixes.
s390:
- Cornelia Huck passed maintainership to Janosch Frank
- exitless interrupts for emulated devices
- cleanup of cpuflag handling
- kvm_stat counter improvements
- VSIE improvements
- mm cleanup
x86:
- hypervisor part of SEV
- UMIP, RDPID, and MSR_SMI_COUNT emulation
- paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit
- allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more
AVX512 features
- show vcpu id in its anonymous inode name
- many fixes and cleanups
- per-VCPU MSR bitmaps (already merged through x86/pti branch)
- stable KVM clock when nesting on Hyper-V (merged through
x86/hyperv)"
* tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits)
KVM: PPC: Book3S: Add MMIO emulation for VMX instructions
KVM: PPC: Book3S HV: Branch inside feature section
KVM: PPC: Book3S HV: Make HPT resizing work on POWER9
KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code
KVM: PPC: Book3S PR: Fix broken select due to misspelling
KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs()
KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled
KVM: PPC: Book3S HV: Drop locks before reading guest memory
kvm: x86: remove efer_reload entry in kvm_vcpu_stat
KVM: x86: AMD Processor Topology Information
x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested
kvm: embed vcpu id to dentry of vcpu anon inode
kvm: Map PFN-type memory regions as writable (if possible)
x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n
KVM: arm/arm64: Fixup userspace irqchip static key optimization
KVM: arm/arm64: Fix userspace_irqchip_in_use counting
KVM: arm/arm64: Fix incorrect timer_is_pending logic
MAINTAINERS: update KVM/s390 maintainers
MAINTAINERS: add Halil as additional vfio-ccw maintainer
MAINTAINERS: add David as a reviewer for KVM/s390
...
59f47eff03a0 ("powerpc/pci: Use of_irq_parse_and_map_pci() helper")
replaced of_irq_parse_pci() + irq_create_of_mapping() with
of_irq_parse_and_map_pci(), but neglected to capture the virq
returned by irq_create_of_mapping(), so virq remained zero, which
caused INTx configuration to fail.
Save the virq value returned by of_irq_parse_and_map_pci() and correct
the virq declaration to match the of_irq_parse_and_map_pci() signature.
Linus Torvalds [Sat, 10 Feb 2018 03:32:41 +0000 (19:32 -0800)]
Merge tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
"Makefile changes:
- enable unused-variable warning that was wrongly disabled for clang
Kconfig changes:
- warn about blank 'help' and fix existing instances
- fix 'choice' behavior to not write out invisible symbols
- fix misc weirdness
Coccinell changes:
- fix false positive of free after managed memory alloc detection
- improve performance of NULL dereference detection"
* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
kconfig: remove const qualifier from sym_expand_string_value()
kconfig: add xrealloc() helper
kconfig: send error messages to stderr
kconfig: echo stdin to stdout if either is redirected
kconfig: remove check_stdin()
kconfig: remove 'config*' pattern from .gitignnore
kconfig: show '?' prompt even if no help text is available
kconfig: do not write choice values when their dependency becomes n
coccinelle: deref_null: avoid useless computation
coccinelle: devm_free: reduce false positives
kbuild: clang: disable unused variable warnings only when constant
kconfig: Warn if help text is blank
nios2: kconfig: Remove blank help text
arm: vt8500: kconfig: Remove blank help text
MIPS: kconfig: Remove blank help text
MIPS: BCM63XX: kconfig: Remove blank help text
lib/Kconfig.debug: Remove blank help text
Staging: rtl8192e: kconfig: Remove blank help text
Staging: rtl8192u: kconfig: Remove blank help text
mmc: kconfig: Remove blank help text
...
projects / kernel.git / log