Ard Biesheuvel [Sun, 27 Jan 2019 08:29:42 +0000 (09:29 +0100)]
arm64: kaslr: ensure randomized quantities are clean also when kaslr is off
Commit b0f672166a27 ("arm64: kaslr: ensure randomized quantities are
clean to the PoC") added cache maintenance to ensure that global
variables set by the kaslr init routine are not wiped clean due to
cache invalidation occurring during the second round of page table
creation.
However, if kaslr_early_init() exits early with no randomization
being applied (either due to the lack of a seed, or because the user
has disabled kaslr explicitly), no cache maintenance is performed,
leading to the same issue we attempted to fix earlier, as far as the
module_alloc_base variable is concerned.
Note that module_alloc_base cannot be initialized statically, because
that would cause it to be subject to a R_AARCH64_RELATIVE relocation,
causing it to be overwritten by the second round of KASLR relocation
processing.
Fixes: 5e08b63d024b ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
Catalin Marinas [Thu, 24 Jan 2019 17:28:37 +0000 (17:28 +0000)]
arm64: Do not issue IPIs for user executable ptes
Commit 6eefe0398eff ("arm64: IPI each CPU after invalidating the I-cache
for kernel mappings") was aimed at fixing the I-cache invalidation for
kernel mappings. However, it inadvertently caused all cache maintenance
for user mappings via set_pte_at() -> __sync_icache_dcache() ->
sync_icache_aliases() to call kick_all_cpus_sync().
Reported-by: Shijith Thotton <sthotton@marvell.com> Tested-by: Shijith Thotton <sthotton@marvell.com> Reported-by: Wandun Chen <chenwandun@huawei.com> Fixes: 6eefe0398eff ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Cc: <stable@vger.kernel.org> # 4.19.x- Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
Linus Torvalds [Sun, 27 Jan 2019 20:02:00 +0000 (12:02 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the swapped outb() parameters in the KASLR code
- Fix the PKEY handling at fork which missed to preserve the pkey
state for the child. Comes with a test case to validate that.
- Fix the entry stack handling for XEN PV to respect that XEN PV
systems enter the function already on the current thread stack and
not on the trampoline.
- Fix kexec load failure caused by using a stale value when the
kexec_buf structure is reused for subsequent allocations.
- Fix a bogus sizeof() in the memory encryption code
- Enforce PCI dependency for the Intel Low Power Subsystem
- Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
x86/entry/64/compat: Fix stack switching for XEN PV
x86/kexec: Fix a kexec_file_load() failure
x86/mm/mem_encrypt: Fix erroneous sizeof()
x86/selftests/pkeys: Fork() to check for state being preserved
x86/pkeys: Properly copy pkey state at fork()
x86/kaslr: Fix incorrect i8254 outb() parameters
x86/intel/lpss: Make PCI dependency explicit
Linus Torvalds [Sun, 27 Jan 2019 19:57:46 +0000 (11:57 -0800)]
Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer fixes from Thomas Gleixner:
"Two commits which were missed to be sent during the merge window.
- The TSC calibration fix turns out to be more urgent as recent
Skylake-X systems seem to have massive trouble with calibration
disturbance. This should go back into stable for that reason and it
the risk of breakage is rather low.
- Drop an unused define"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Remove unused FSEC_PER_NSEC define
x86/tsc: Make calibration refinement more robust
Linus Torvalds [Sun, 27 Jan 2019 19:55:06 +0000 (11:55 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Glexiner:
"A single regression fix to address the unintended breakage of posix
cpu timers.
This is caused by a new sanity check in the common code, which fails
for posix cpu timers under certain conditions because the posix cpu
timer code never updates the variable which is checked"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Unbreak timer rearming
Linus Torvalds [Sun, 27 Jan 2019 19:25:38 +0000 (11:25 -0800)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A small set of fixes for the interrupt subsystem:
- Fix a double increment in the irq descriptor allocator which
resulted in a sanity check only being done for every second
affinity mask
- Add a missing device tree translation in the stm32-exti driver.
Without that the interrupt association is completely wrong.
- Initialize the mutex in the GIC-V3 MBI driver
- Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
multi MSI allocations work correctly
- Ensure that the initial affinity of a interrupt is not empty at
startup time.
- Drop bogus include in the madera irq chip driver
- Fix KernelDoc regression"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
genirq/irqdesc: Fix double increment in alloc_descs()
genirq: Fix the kerneldoc comment for struct irq_affinity_desc
irqchip/madera: Drop GPIO includes
irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
irqchip/stm32-exti: Add domain translate function
genirq: Make sure the initial affinity is not empty
Linus Torvalds [Sun, 27 Jan 2019 17:21:00 +0000 (09:21 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Quite a few fixes for x86: nested virtualization save/restore, AMD
nested virtualization and virtual APIC, 32-bit fixes, an important fix
to restore operation on older processors, and a bunch of hyper-v
bugfixes. Several are marked stable.
There are also fixes for GCC warnings and for a GCC/objtool interaction"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Mark expected switch fall-throughs
KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
KVM: selftests: check returned evmcs version range
x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
kvm: selftests: Fix region overlap check in kvm_util
kvm: vmx: fix some -Wmissing-prototypes warnings
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
svm: Fix AVIC incomplete IPI emulation
svm: Add warning message for AVIC IPI invalid target
KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
KVM: x86: Fix PV IPIs for 32-bit KVM host
x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
kvm: x86/vmx: Use kzalloc for cached_vmcs12
KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
KVM: x86: Fix single-step debugging
x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
Linus Torvalds [Sun, 27 Jan 2019 17:11:51 +0000 (09:11 -0800)]
Merge tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A fix for namespace label support for non-Intel NVDIMMs that implement
the ACPI standard label method.
This has apparently never worked and could wait for v5.1. However it
has enough visibility with hardware vendors [1] and distro bug
trackers [2], and low enough risk that I decided it should go in for
-rc4. The other fixups target the new, for v5.0, nvdimm security
functionality. The larger init path fixup closes a memory leak and a
potential userspace lockup due to missed notifications.
These have all soaked in -next for a week with no reported issues.
Summary:
- Fix support for NVDIMMs that implement the ACPI standard label
methods.
- Fix error handling for security overwrite (memory leak / userspace
hang condition), and another one-line security cleanup"
* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
acpi/nfit: Fix command-supported detection
acpi/nfit: Block function zero DSMs
libnvdimm/security: Require nvdimm_security_setup_events() to succeed
nfit_test: fix security state pull for nvdimm security nfit_test
1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.
2) Integer overflow in ktime handling of bcm can code, from Oliver
Hartkopp.
3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
Horman.
4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.
5) Use after free in ax25, from Eric Dumazet.
6) Several fixes to the SSN support in SCTP, from Xin Long.
7) Do not process frames after a NAPI reschedule in ibmveth, from
Thomas Falcon.
8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
qed: Revert error handling changes.
cfg80211: extend range deviation for DMG
cfg80211: reg: remove warn_on for a normal case
mac80211: Add attribute aligned(2) to struct 'action'
mac80211: don't initiate TDLS connection if station is not associated to AP
nl80211: fix NLA_POLICY_NESTED() arguments
ibmveth: Do not process frames after calling napi_reschedule
net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
net: usb: asix: ax88772_bind return error when hw_reset fail
MAINTAINERS: Update cavium networking drivers
net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
net/mlx4_core: Add masking for a few queries on HCA caps
sctp: set flow sport from saddr only when it's 0
sctp: set chunk transport correctly when it's a new asoc
sctp: improve the events for sctp stream adding
sctp: improve the events for sctp stream reset
ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
ax25: fix possible use-after-free
sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
hv_netvsc: fix typos in code comments
...
Linus Torvalds [Sat, 26 Jan 2019 23:38:22 +0000 (15:38 -0800)]
Merge tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb3 fixes from Steve French:
"A set of small smb3 fixes, some fixing various crediting issues
discovered during xfstest runs, five for stable"
* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
smb3: add credits we receive from oplock/break PDUs
CIFS: Fix mounts if the client is low on credits
CIFS: Do not assume one credit for async responses
CIFS: Fix credit calculations in compound mid callback
CIFS: Fix credit calculation for encrypted reads with errors
CIFS: Fix credits calculations for reads with errors
CIFS: Do not reconnect TCP session in add_credits()
smb3: Cleanup license mess
CIFS: Fix possible hang during async MTU reads and writes
cifs: fix memory leak of an allocated cifs_ntsd structure
Linus Torvalds [Sat, 26 Jan 2019 23:03:43 +0000 (15:03 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, all of which appear to have user visible consequences.
The DMA one is a regression fix from the merge window and of the
others, four are driver specific and one specific to the target code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Use explicit access size in ufshcd_dump_regs
scsi: tcmu: fix use after free
scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
scsi: communicate max segment size to the DMA mapping code
Linus Torvalds [Sat, 26 Jan 2019 20:42:41 +0000 (12:42 -0800)]
Merge tag 'for-linus-20190125' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes for this release. This contains:
- Silence sparse rightfully complaining about non-static wbt
functions (Bart)
- Fixes for the zoned comments/ioctl documentation (Damien)
- direct-io fix that's been lingering for a while (Ernesto)
- cgroup writeback fix (Tejun)
- Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)
- Block recursion tracking fix (Ming)
- Fix debugfs command flag naming for a few flags (Jianchao)"
* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
block: Fix comment typo
uapi: fix ioctl documentation
blk-wbt: Declare local functions static
blk-mq: fix the cmd_flag_name array
nvme-multipath: drop optimization for static ANA group IDs
nvmet-rdma: fix null dereference under heavy load
nvme-rdma: rework queue maps handling
nvme-tcp: fix timeout handler
nvme-rdma: fix timeout handler
writeback: synchronize sync(2) against cgroup writeback membership switches
block: cover another queue enter recursion via BIO_QUEUE_ENTERED
direct-io: allow direct writes to empty inodes
Linus Torvalds [Fri, 25 Jan 2019 23:07:03 +0000 (13:07 -1000)]
Merge tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- sdhci-acpi: Fixup build dependency for PCI
- sdhci-omap: Resolve Kconfig warnings on keystone
- sdhci-iproc: Propagate errors from DT parsing
- meson-gx: Fixup IRQ handling in release callback
- meson-gx: Use signal re-sampling to fixup tuning
- dw_mmc-bluefield: Fix the license information
* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: dw_mmc-bluefield: : Fix the license information
mmc: meson-gx: enable signal re-sampling together with tuning
mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
mmc: meson-gx: Free irq in release() callback
mmc: host: Fix Kconfig warnings on keystone_defconfig
mmc: sdhci-acpi: Make PCI dependency explicit
Linus Torvalds [Fri, 25 Jan 2019 23:03:34 +0000 (13:03 -1000)]
Merge tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes to resolve some
reported issues, as well as a number of binderfs fixups that were
found after auditing the filesystem code by Al Viro. As binderfs
hasn't been in a previous release yet, it's good to get these in now
before the first users show up.
All of these have been in linux-next for a bit with no reported
issues"
* tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
binderfs: switch from d_add() to d_instantiate()
binderfs: drop lock in binderfs_binder_ctl_create
binderfs: kill_litter_super() before cleanup
binderfs: rework binderfs_binder_device_create()
binderfs: rework binderfs_fill_super()
binderfs: prevent renaming the control dentry
binderfs: remove outdated comment
binderfs: use __u32 for device numbers
binderfs: use correct include guards in header
misc: pvpanic: fix warning implicit declaration
char/mwave: fix potential Spectre v1 vulnerability
misc: ibmvsm: Fix potential NULL pointer dereference
binderfs: fix error return code in binderfs_fill_super()
mei: me: add denverton innovation engine device IDs
mei: me: mark LBG devices as having dma support
mei: dma: silent the reject message
binderfs: handle !CONFIG_IPC_NS builds
binderfs: reserve devices for initial mount
binderfs: rename header to binderfs.h
...
Linus Torvalds [Fri, 25 Jan 2019 23:02:12 +0000 (13:02 -1000)]
Merge tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.0-rc4.
They resolve some reported bugs and add a new device id for one
driver. Nothing major at all, but all good to have.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: android: ion: Support cpu access during dma_buf_detach
staging: rtl8723bs: Fix build error with Clang when inlining is disabled
staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
staging: vchiq: Fix local event signalling
Staging: wilc1000: unlock on error in init_chip()
staging: wilc1000: fix memory leak in wilc_add_rx_gtk
staging: wilc1000: fix registration frame size
Linus Torvalds [Fri, 25 Jan 2019 22:58:40 +0000 (12:58 -1000)]
Merge tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a number of small tty core and serial driver fixes for
5.0-rc4 to resolve some reported issues.
Nothing major, the small serial driver fixes, a tty core fixup for a
crash that was reported, and some good vt fixes from Nicolas Pitre as
he seems to be auditing that chunk of code a lot lately.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
tty: Handle problem if line discipline does not have receive_buf
vgacon: unconfuse vc_origin when using soft scrollback
vt: invoke notifier on screen size change
vt: always call notifier with the console lock held
vt: make vt_console_print() compatible with the unicode screen buffer
tty/n_hdlc: fix __might_sleep warning
serial: 8250: Fix serial8250 initialization crash
uart: Fix crash in uart_write and uart_put_char
Linus Torvalds [Fri, 25 Jan 2019 22:57:09 +0000 (12:57 -1000)]
Merge tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 5.0-rc4.
Nothing major at all, just the usual selection of USB gadget bugfixes,
some new USB serial driver ids, some SPDX fixes, and some PHY driver
fixes for reported issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: keyspan_usa: add proper SPDX lines for .h files
USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
USB: leds: fix regression in usbport led trigger
usb: chipidea: fix static checker warning for NULL pointer
MAINTAINERS: email address update in MAINTAINERS entries
USB: usbip: delete README file
USB: serial: pl2303: add new PID to support PL2303TB
usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
phy: ath79-usb: Fix the main reset name to match the DT binding
phy: ath79-usb: Fix the power on error path
phy: fix build breakage: add PHY_MODE_SATA
phy: ti: ensure priv is not null before dereferencing it
USB: serial: ftdi_sio: fix GPIO not working in autosuspend
usb: gadget: Potential NULL dereference on allocation error
usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
USB: serial: simple: add Motorola Tetra TPG2200 device id
David S. Miller [Fri, 25 Jan 2019 18:59:36 +0000 (10:59 -0800)]
Merge tag 'mac80211-for-davem-2019-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a few small fixes:
* avoid trying to operate TDLS when not connection,
this is not valid and led to issues
* count TTL-dropped frames in mesh better
* deal with new WiGig channels in regulatory code
* remove a WARN_ON() that can trigger due to benign
races during device/driver registration
* fix nested netlink policy maxattrs (syzkaller)
* fix hwsim n_limits (syzkaller)
* propagate __aligned(2) to a surrounding struct
* return proper error in virt_wifi error path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/x86/kvm/lapic.c:1037:27: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/lapic.c:1876:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/hyperv.c:1637:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/svm.c:4396:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/mmu.c:4372:36: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:3835:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:7938:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:2015:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:1773:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Masahiro Yamada [Fri, 25 Jan 2019 07:32:46 +0000 (16:32 +0900)]
KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.
The reason of having -I. here is to make the incorrectly set
TRACE_INCLUDE_PATH working.
As the comment block in include/trace/define_trace.h says,
TRACE_INCLUDE_PATH should be a relative path to the define_trace.h
Fix the TRACE_INCLUDE_PATH, and remove the iffy include paths.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 51a8bd879ad0 ("x86/kvm/hyper-v: Introduce nested_get_evmcs_version()
helper") broke EVMCS enablement: to set vmcs_version we now call
nested_get_evmcs_version() but this function checks
enlightened_vmcs_enabled flag which is not yet set so we end up returning
zero.
Fix the issue by re-arranging things in nested_enable_evmcs().
KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
...along with the function's STACK_FRAME_NON_STANDARD tag. Moving the
asm blob results in a significantly smaller amount of code that is
marked with STACK_FRAME_NON_STANDARD, which makes it far less likely
that gcc will split the function and trigger a spurious objtool warning.
As a bonus, removing STACK_FRAME_NON_STANDARD from vmx_vcpu_run() allows
the bulk of code to be properly checked by objtool.
Because %rbp is not loaded via VMCS fields, vmx_vcpu_run() must manually
save/restore the host's RBP and load the guest's RBP prior to calling
vmx_vmenter(). Modifying %rbp triggers objtool's stack validation code,
and so vmx_vcpu_run() is tagged with STACK_FRAME_NON_STANDARD since it's
impossible to avoid modifying %rbp.
Unfortunately, vmx_vcpu_run() is also a gigantic function that gcc will
split into separate functions, e.g. so that pieces of the function can
be inlined. Splitting the function means that the compiled Elf file
will contain one or more vmx_vcpu_run.part.* functions in addition to
a vmx_vcpu_run function. Depending on where the function is split,
objtool may warn about a "call without frame pointer save/setup" in
vmx_vcpu_run.part.* since objtool's stack validation looks for exact
names when whitelisting functions tagged with STACK_FRAME_NON_STANDARD.
Up until recently, the undesirable function splitting was effectively
blocked because vmx_vcpu_run() was tagged with __noclone. At the time,
__noclone had an unintended side effect that put vmx_vcpu_run() into a
separate optimization unit, which in turn prevented gcc from inlining
the function (or any of its own function calls) and thus eliminated gcc's
motivation to split the function. Removing the __noclone attribute
allowed gcc to optimize vmx_vcpu_run(), exposing the objtool warning.
Kudos to Qian Cai for root causing that the fnsplit optimization is what
caused objtool to complain.
Fixes: 1e69499beff9 ("KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines") Tested-by: Qian Cai <cai@lca.pw> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ben Gardon [Wed, 16 Jan 2019 17:41:15 +0000 (09:41 -0800)]
kvm: selftests: Fix region overlap check in kvm_util
Fix a call to userspace_mem_region_find to conform to its spec of
taking an inclusive, inclusive range. It was previously being called
with an inclusive, exclusive range. Also remove a redundant region bounds
check in vm_userspace_mem_region_add. Region overlap checking is already
performed by the call to userspace_mem_region_find.
Tested: Compiled tools/testing/selftests/kvm with -static
Ran all resulting test binaries on an Intel Haswell test machine
All tests passed
Signed-off-by: Ben Gardon <bgardon@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yi Wang [Mon, 21 Jan 2019 07:27:05 +0000 (15:27 +0800)]
kvm: vmx: fix some -Wmissing-prototypes warnings
We get some warnings when building kernel with W=1:
arch/x86/kvm/vmx/vmx.c:426:5: warning: no previous prototype for ‘kvm_fill_hv_flush_list_func’ [-Wmissing-prototypes]
arch/x86/kvm/vmx/nested.c:58:6: warning: no previous prototype for ‘init_vmcs_shadow_fields’ [-Wmissing-prototypes]
Make them static to fix this.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
kvm-unit-tests' eventinj "NMI failing on IDT" test results in NMI being
delivered to the host (L1) when it's running nested. The problem seems to
be: svm_complete_interrupts() raises 'nmi_injected' flag but later we
decide to reflect EXIT_NPF to L1. The flag remains pending and we do NMI
injection upon entry so it got delivered to L1 instead of L2.
It seems that VMX code solves the same issue in prepare_vmcs12(), this was
introduced with code refactoring in commit a6b97e46c1a2 ("KVM: nVMX: Rework
event injection and recovery").
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In case of incomplete IPI with invalid interrupt type, the current
SVM driver does not properly emulate the IPI, and fails to boot
FreeBSD guests with multiple vcpus when enabling AVIC.
Fix this by update APIC ICR high/low registers, which also
emulate sending the IPI.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
svm: Add warning message for AVIC IPI invalid target
Print warning message when IPI target ID is invalid due to one of
the following reasons:
* In logical mode: cluster > max_cluster (64)
* In physical mode: target > max_physical (512)
* Address is not present in the physical or logical ID tables
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
KVM hypercalls return a negative value error code in case of a fatal
error, e.g. when the hypercall isn't supported or was made with invalid
parameters. WARN_ONCE on fatal errors when sending PV IPIs as any such
error all but guarantees an SMP system will hang due to a missing IPI.
Fixes: 3c7773d76636 ("KVM: X86: Implement PV IPIs in linux guest") Cc: stable@vger.kernel.org Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recognition of the KVM_HC_SEND_IPI hypercall was unintentionally
wrapped in "#ifdef CONFIG_X86_64", causing 32-bit KVM hosts to reject
any and all PV IPI requests despite advertising the feature. This
results in all KVM paravirtualized guests hanging during SMP boot due
to IPIs never being delivered.
Fixes: 8fa040349c6c ("KVM: X86: Implement "send IPI" hypercall") Cc: stable@vger.kernel.org Cc: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Fri, 25 Jan 2019 11:19:34 +0000 (12:19 +0100)]
x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
We shouldn't probably be suggesting using Enlightened VMCS when it's not
enabled (not supported from guest's point of view). Hyper-V on KVM seems
to be fine either way but let's be consistent.
Tom Roeder [Thu, 24 Jan 2019 21:48:20 +0000 (13:48 -0800)]
kvm: x86/vmx: Use kzalloc for cached_vmcs12
This changes the allocation of cached_vmcs12 to use kzalloc instead of
kmalloc. This removes the information leak found by Syzkaller (see
Reported-by) in this case and prevents similar leaks from happening
based on cached_vmcs12.
It also changes vmx_get_nested_state to copy out the full 4k VMCS12_SIZE
in copy_to_user rather than only the size of the struct.
Tested: rebuilt against head, booted, and ran the syszkaller repro
https://syzkaller.appspot.com/text?tag=ReproC&x=174efca3400000 without
observing any problems.
Reported-by: syzbot+ded1696f6b50b615b630@syzkaller.appspotmail.com Fixes: 75a15e08645720cc7541f244a54c933873b382ab Cc: stable@vger.kernel.org Signed-off-by: Tom Roeder <tmroeder@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alexander Popov [Mon, 21 Jan 2019 12:48:40 +0000 (15:48 +0300)]
KVM: x86: Fix single-step debugging
The single-step debugging of KVM guests on x86 is broken: if we run
gdb 'stepi' command at the breakpoint when the guest interrupts are
enabled, RIP always jumps to native_apic_mem_write(). Then other
nasty effects follow.
Long investigation showed that on Jun 7, 2017 the
commit f496310d32d208408b2e ("KVM: x86: fix singlestepping over syscall")
introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can
be called without X86_EFLAGS_TF set.
Let's fix it. Please consider that for -stable.
Signed-off-by: Alexander Popov <alex.popov@linux.com> Cc: stable@vger.kernel.org Fixes: f496310d32d208408b2e ("KVM: x86: fix singlestepping over syscall") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Thu, 24 Jan 2019 14:27:09 +0000 (15:27 +0100)]
x86/kvm/hyper-v: don't announce GUEST IDLE MSR support
HV_X64_MSR_GUEST_IDLE_AVAILABLE appeared in kvm_vcpu_ioctl_get_hv_cpuid()
by mistake: it announces support for HV_X64_MSR_GUEST_IDLE (0x400000F0)
which we don't support in KVM (yet).
Chaitanya Tata [Fri, 18 Jan 2019 21:47:47 +0000 (03:17 +0530)]
cfg80211: extend range deviation for DMG
Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Chaitanya Tata [Thu, 24 Jan 2019 10:43:02 +0000 (16:13 +0530)]
cfg80211: reg: remove warn_on for a normal case
If there are simulatenous queries of regdb, then there might be a case
where multiple queries can trigger request_firmware_no_wait and can have
parallel callbacks being executed asynchronously. In this scenario we
might hit the WARN_ON.
So remove the warn_on, as the code already handles multiple callbacks
gracefully.
Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Fri, 25 Jan 2019 08:26:32 +0000 (09:26 +0100)]
nl80211: fix NLA_POLICY_NESTED() arguments
syzbot reported an out-of-bounds read when passing certain
malformed messages into nl80211. The specific place where
this happened isn't interesting, the problem is that nested
policy parsing was referring to the wrong maximum attribute
and thus the policy wasn't long enough.
Fix this by referring to the correct attribute. Since this
is really not necessary, I'll come up with a separate patch
to just pass the policy instead of both, in the common case
we can infer the maxattr from the size of the policy array.
Reported-by: syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: f5b4872af518 ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Thomas Falcon [Thu, 24 Jan 2019 17:17:01 +0000 (11:17 -0600)]
ibmveth: Do not process frames after calling napi_reschedule
The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
__bpf_redirect() and act_mirred checks this boolean
to determine whether to prefix an ethernet header.
Signed-off-by: Maciej Żenczykowski <maze@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Run [Thu, 24 Jan 2019 05:48:49 +0000 (13:48 +0800)]
net: usb: asix: ax88772_bind return error when hw_reset fail
The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
reg index 0x0000: -71
...
Signed-off-by: Zhang Run <zhang.run@zte.com.cn> Reviewed-by: Yang Wei <yang.wei9@zte.com.cn> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Following Marvell's acquisition of Cavium, we need to update all the
Cavium drivers maintainer's entries to point to our new e-mail addresses.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 Jan 2019 06:22:17 +0000 (22:22 -0800)]
Merge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Sasha Levin says:
====================
Hyper-V hv_netvsc commits for 5.0
Three patches from Haiyang Zhang to fix settings hash key using ethtool,
and Adrian Vladu's first patch fixing a few spelling mistakes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 25 Jan 2019 05:52:37 +0000 (21:52 -0800)]
Merge tag 'linux-can-fixes-for-5.0-20190122' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2019-01-22
this is a pull request of 4 patches for net/master.
The first patch by is by Manfred Schlaegl and reverts a patch that caused wrong
warning messages in certain use cases. The next patch is by Oliver Hartkopp for
the bcm that adds sanity checks for the timer value before using it to detect
potential interger overflows. The last two patches are for the flexcan driver,
YueHaibing's patch fixes the the return value in the error path of the
flexcan_setup_stop_mode() function. The second patch is by Uwe Kleine-König and
fixes a NULL pointer deref on older flexcan cores in flexcan_chip_start().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jack Morgenstein [Tue, 22 Jan 2019 13:19:45 +0000 (15:19 +0200)]
net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
Procedure mlx4_init_user_cqes() handles returns by copy_to_user
incorrectly. copy_to_user() returns the number of bytes not copied.
Thus, a non-zero return should be treated as a -EFAULT error
(as is done elsewhere in the kernel). However, mlx4_init_user_cqes()
error handling simply returns the number of bytes not copied
(instead of -EFAULT).
Note, though, that this is a harmless bug: procedure mlx4_alloc_cq()
(which is the only caller of mlx4_init_user_cqes()) treats any
non-zero return as an error, but that returned error value is processed
internally, and not passed further up the call stack.
In addition, fixes the following sparse warning:
warning: incorrect type in argument 1 (different address spaces)
expected void [noderef] <asn:1>*to
got void *buf
Fixes: b97355fc233a ("{net, IB}/mlx4: Initialize CQ buffers in the driver when possible")
Reported by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Levin [Tue, 22 Jan 2019 13:19:44 +0000 (15:19 +0200)]
net/mlx4_core: Add masking for a few queries on HCA caps
Driver reads the query HCA capabilities without the corresponding masks.
Without the correct masks, the base addresses of the queues are
unaligned. In addition some reserved bits were wrongly read. Using the
correct masks, ensures alignment of the base addresses and allows future
firmware versions safe use of the reserved bits.
Fixes: bfa3f2377fe3 ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 46890974bc92 ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 21 Jan 2019 18:42:41 +0000 (02:42 +0800)]
sctp: set flow sport from saddr only when it's 0
Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set
flow sport from 'saddr'. However, transport->saddr is set only when
transport->dst exists in sctp_transport_route().
If sctp_transport_pmtu() is called without transport->saddr set, like
when transport->dst doesn't exists, the flow sport will be set to 0
from transport->saddr, which will cause a wrong route to be got.
Commit 5861e99b9c07 ("sctp: re-use sctp_transport_pmtu in
sctp_transport_route") made the issue be triggered more easily
since sctp_transport_pmtu() would be called in sctp_transport_route()
after that.
In gerneral, fl4->fl4_sport should always be set to
htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist
in sctp_v4/6_get_dst(), which is the case:
sctp_ootb_pkt_new() ->
sctp_transport_route()
For that, we can simply handle it by setting flow sport from saddr only
when it's 0 in sctp_v4/6_get_dst().
Fixes: 5861e99b9c07 ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The new chunk 'retval' transport is set from the incoming chunk 'chunk'
transport. However, 'retval' transport belong to the new asoc, which
is a different one from 'chunk' transport's asoc.
It will cause that the 'retval' chunk gets set with a wrong transport.
Later when sending it and because of Commit acbb7f385fbb ("sctp: add
sctp_packet_singleton"), sctp_packet_singleton() will set some fields,
like vtag to 'retval' chunk from that wrong transport's asoc.
This patch is to fix it by setting 'retval' transport correctly which
belongs to the right asoc in sctp_make_init_ack() and
sctp_sf_do_5_1D_ce().
Fixes: acbb7f385fbb ("sctp: add sctp_packet_singleton") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 21 Jan 2019 18:40:12 +0000 (02:40 +0800)]
sctp: improve the events for sctp stream adding
This patch is to improve sctp stream adding events in 2 places:
1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM
and in stream allocation failure checks, as the adding has to
succeed after reconf_timer stops for the in stream adding
request retransmission.
3. In sctp_process_strreset_addstrm_in(), no event should be sent,
as no in or out stream is added here.
Fixes: 30c6673b8793 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter") Fixes: cc778e618b95 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 21 Jan 2019 18:39:34 +0000 (02:39 +0800)]
sctp: improve the events for sctp stream reset
This patch is to improve sctp stream reset events in 4 places:
1. In sctp_process_strreset_outreq(), the flag should always be set with
SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in
stream is reset here.
2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN
check, as the reset has to succeed after reconf_timer stops for the
in stream reset request retransmission.
3. In sctp_process_strreset_inreq(), no event should be sent, as no in
or out stream is reset here.
4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or
OUTGOING event should always be sent for stream reset requests, no
matter it fails or succeeds to process the request.
Fixes: 74fd92dcbe8e ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter") Fixes: d09833d3b7ab ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter") Fixes: 87f668e6dad9 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drm:
drm/msm: avoid unused function warning
drm/msm: Add __printf verification
drm/msm: Fix A6XX support for opp-level
drm/msm: honor GPU_READONLY flag
drm/msm: drop interrupt-names
drm/msm/gpu: Remove hardcoded interrupt name
drm/msm/gpu: fix building without debugfs
drm/i915/execlists: Mark up priority boost on preemption
drm/i915/gvt: release shadow batch buffer and wa_ctx before destroy one workload
drm/sun4i: hdmi: Fix usage of TMDS clock
drm/amd/powerplay: OD setting fix on Vega10
drm/amdgpu: Add APTX quirk for Lenovo laptop
drm/msm: Unblock writer if reader closes file
Dave Airlie [Thu, 24 Jan 2019 21:44:53 +0000 (07:44 +1000)]
Merge tag 'drm-msm-fixes-2019-01-24' of git://people.freedesktop.org/~robclark/linux into drm-fixes
A few fixes for v5.0.. the opp-level fix and removal of hard-coded irq
name is partially to make things smoother in v5.1 merge window to
avoid dependency on drm vs dt trees, but are otherwise sane changes.
Ronnie Sahlberg [Wed, 23 Jan 2019 06:20:38 +0000 (16:20 +1000)]
smb3: add credits we receive from oplock/break PDUs
Otherwise we gradually leak credits leading to potential
hung session.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> CC: Stable <stable@vger.kernel.org> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Wed, 16 Jan 2019 19:48:42 +0000 (11:48 -0800)]
CIFS: Fix mounts if the client is low on credits
If the server doesn't grant us at least 3 credits during the mount
we won't be able to complete it because query path info operation
requires 3 credits. Use the cached file handle if possible to allow
the mount to succeed.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Tue, 15 Jan 2019 23:08:48 +0000 (15:08 -0800)]
CIFS: Do not assume one credit for async responses
If we don't receive a response we can't assume that the server
granted one credit. Assume zero credits in such cases.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Wed, 23 Jan 2019 00:50:21 +0000 (16:50 -0800)]
CIFS: Fix credit calculations in compound mid callback
The current code doesn't do proper accounting for credits
in SMB1 case: it adds one credit per response only if we get
a complete response while it needs to return it unconditionally.
Fix this and also include malformed responses for SMB2+ into
accounting for credits because such responses have Credit
Granted field, thus nothing prevents to get a proper credit
value from them.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Fri, 18 Jan 2019 23:38:11 +0000 (15:38 -0800)]
CIFS: Fix credit calculation for encrypted reads with errors
We do need to account for credits received in error responses
to read requests on encrypted sessions.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Thu, 17 Jan 2019 23:29:26 +0000 (15:29 -0800)]
CIFS: Fix credits calculations for reads with errors
Currently we mark MID as malformed if we get an error from server
in a read response. This leads to not properly processing credits
in the readv callback. Fix this by marking such a response as
normal received response and process it appropriately.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Sat, 19 Jan 2019 01:25:36 +0000 (17:25 -0800)]
CIFS: Do not reconnect TCP session in add_credits()
When executing add_credits() we currently call cifs_reconnect()
if the number of credits is zero and there are no requests in
flight. In this case we may call cifs_reconnect() recursively
twice and cause memory corruption given the following sequence
of functions:
Fix this by avoiding to call cifs_reconnect() in add_credits()
and checking for zero credits in the demultiplex thread.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Arnd Bergmann [Thu, 10 Jan 2019 14:14:03 +0000 (15:14 +0100)]
drm/msm: avoid unused function warning
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]
Fixes: d510a1b88af8 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Douglas Anderson [Wed, 16 Jan 2019 18:46:21 +0000 (10:46 -0800)]
drm/msm: Fix A6XX support for opp-level
The bindings for Qualcomm opp levels changed after being Acked but
before landing. Thus the code in the GPU driver that was relying on
the old bindings is now broken.
Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'. See the patch
("dt-bindings: opp: Introduce opp-level bindings").
NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch. This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.
This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.
Fixes: 7639a2c539ea ("drm/msm: Add A6XX device support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Jordan Crouse [Tue, 18 Dec 2018 18:32:36 +0000 (11:32 -0700)]
drm/msm/gpu: Remove hardcoded interrupt name
Every GPU core only has one interrupt so there isn't any
value in looking up the interrupt by name. Remove the name (which
is legacy anyway) and use platform_get_irq() instead.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
Arnd Bergmann [Mon, 13 Aug 2018 21:23:44 +0000 (23:23 +0200)]
drm/msm/gpu: fix building without debugfs
When debugfs is disabled, but coredump is turned on, the adreno driver fails to build:
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
.show = adreno_show,
^~~~
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base')
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: error: initialization of 'void (*)(struct msm_gpu *, struct msm_gem_submit *, struct msm_file_private *)' from incompatible pointer type 'void (*)(struct msm_gpu *, struct msm_gpu_state *, struct drm_printer *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base.submit')
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:546:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:769:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_devcoredump_read':
drivers/gpu/drm/msm/msm_gpu.c:289:12: error: 'const struct msm_gpu_funcs' has no member named 'show'
Adjust the #ifdef to make it build again.
Fixes: eb5341baf804 ("drm/msm/gpu: Capture the GPU state on a GPU hang") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
Linus Torvalds [Thu, 24 Jan 2019 20:07:18 +0000 (09:07 +1300)]
Merge tag 'for-5.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM crypt's parsing of extended IV arguments.
- Fix DM thinp's discard passdown to properly account for extra
reference that is taken to guard against reallocating a block before
a discard has been issued.
- Fix bio-based DM's redundant IO accounting that was occurring for
bios that must be split due to the nature of the DM target (e.g.
dm-stripe, dm-thinp, etc).
* tag 'for-5.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: add missing trace_block_split() to __split_and_process_bio()
dm: fix dm_wq_work() to only use __split_and_process_bio() if appropriate
dm: fix redundant IO accounting for bios that need splitting
dm: fix clone_bio() to trigger blk_recount_segments()
dm thin: fix passdown_double_checking_shared_status()
dm crypt: fix parsing of extended IV arguments
Damien Le Moal [Thu, 24 Jan 2019 09:20:13 +0000 (18:20 +0900)]
uapi: fix ioctl documentation
The description of the BLKGETNRZONES zoned block device ioctl was not
added as a comment together with this ioctl definition in commit 35e7269bdb40c ("block: Introduce BLKGETNRZONES ioctl"). Add its
description here.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bart Van Assche [Wed, 23 Jan 2019 19:05:57 +0000 (11:05 -0800)]
blk-wbt: Declare local functions static
This patch avoids that sparse reports the following warnings:
CHECK block/blk-wbt.c
block/blk-wbt.c:600:6: warning: symbol 'wbt_issue' was not declared. Should it be static?
block/blk-wbt.c:620:6: warning: symbol 'wbt_requeue' was not declared. Should it be static?
CC block/blk-wbt.o
block/blk-wbt.c:600:6: warning: no previous prototype for wbt_issue [-Wmissing-prototypes]
void wbt_issue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~
block/blk-wbt.c:620:6: warning: no previous prototype for wbt_requeue [-Wmissing-prototypes]
void wbt_requeue(struct rq_qos *rqos, struct request *rq)
^~~~~~~~~~~
Linus Torvalds [Thu, 24 Jan 2019 16:59:22 +0000 (05:59 +1300)]
Merge tag 'ceph-for-5.0-rc4' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential use-after-free, a patch to close a (mostly
benign) race in the messenger and a licence clarification for quota.c"
* tag 'ceph-for-5.0-rc4' of git://github.com/ceph/ceph-client:
ceph: quota: cleanup license mess
libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()
ceph: clear inode pointer when snap realm gets dropped by its inode
Linus Torvalds [Thu, 24 Jan 2019 16:55:26 +0000 (05:55 +1300)]
Merge tag 'sound-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A significant amount of fixes at this time, mostly for covering the
recent ASoC issues.
- Fixes for the missing ASoC driver initialization with non-deferred
probes; these triggered other problems in chain, which resulted in
yet more fix commits
- DaVinci runtime PM fix; the diff looks large but it's just a code
shuffling
- Various fixes for ASoC Intel drivers: a regression in HD-A HDMI,
Kconfig dependency, machine driver adjustments, PLL fix.
- Other ASoC driver-specific stuff including the trivial fixes caught
by static analysis
- Usual HD-audio quirks"
* tag 'sound-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda - Add mute LED support for HP ProBook 470 G5
ASoC: amd: Fix potential NULL pointer dereference
ASoC: imx-audmux: change snprintf to scnprintf for possible overflow
ASoC: rt5514-spi: Fix potential NULL pointer dereference
ASoC: dapm: change snprintf to scnprintf for possible overflow
ASoC: rt5682: Fix PLL source register definitions
ASoC: core: Don't defer probe on optional, NULL components
ASoC: core: Make snd_soc_find_component() more robust
ASoC: soc-core: fix init platform memory handling
ASoC: intel: skl: Fix display power regression
ALSA: hda/realtek - Fix typo for ALC225 model
ASoC: soc-core: Hold client_mutex around soc_init_dai_link()
ASoC: Intel: Boards: move the codec PLL configuration to _init
ASoC: soc-core: defer card probe until all component is added to list
ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages
ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby mode
ASoC: ti: davinci-mcasp: Move context save/restore to runtime_pm callbacks
ASoC: Variable "val" in function rt274_i2c_probe() could be uninitialized
ASoC: rt5682: Fix recording no sound issue
ASoC: Intel: atom: Make PCI dependency explicit
...
Thomas Gleixner [Thu, 17 Jan 2019 23:14:23 +0000 (00:14 +0100)]
smb3: Cleanup license mess
Precise and non-ambiguous license information is important. The recently
added aegis header file has a SPDX license identifier, which is nice, but
at the same time it has a contradictionary license boiler plate text.
SPDX-License-Identifier: GPL-2.0
versus
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
Oh well.
Assuming that the SPDX identifier is correct and according to x86/hyper-v
contributions from Microsoft GPL V2 only is the usual license.
Remove the boiler plate as it is wrong and even if correct it is redundant.
Fixes: 313a25ca773e ("smb3: Add ftrace tracepoints for improved SMB3 debugging") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Steve French <sfrench@samba.org> Cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
Pavel Shilovsky [Thu, 17 Jan 2019 16:21:24 +0000 (08:21 -0800)]
CIFS: Fix possible hang during async MTU reads and writes
When doing MTU i/o we need to leave some credits for
possible reopen requests and other operations happening
in parallel. Currently we leave 1 credit which is not
enough even for reopen only: we need at least 2 credits
if durable handle reconnect fails. Also there may be
other operations at the same time including compounding
ones which require 3 credits at a time each. Fix this
by leaving 8 credits which is big enough to cover most
scenarios.
Was able to reproduce this when server was configured
to give out fewer credits than usual.
The proper fix would be to reconnect a file handle first
and then obtain credits for an MTU request but this leads
to bigger code changes and should happen in other patches.
Cc: <stable@vger.kernel.org> Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Colin Ian King [Wed, 16 Jan 2019 16:28:59 +0000 (16:28 +0000)]
cifs: fix memory leak of an allocated cifs_ntsd structure
The call to SMB2_queary_acl can allocate memory to pntsd and also
return a failure via a call to SMB2_query_acl (and then query_info).
This occurs when query_info allocates the structure and then in
query_info the call to smb2_validate_and_copy_iov fails. Currently the
failure just returns without kfree'ing pntsd hence causing a memory
leak.
Currently, *data is allocated if it's not already pointing to a buffer,
so it needs to be kfree'd only if was allocated in query_info, so the
fix adds an allocated flag to track this. Also set *dlen to zero on
an error just to be safe since *data is kfree'd.
Also set errno to -ENOMEM if the allocation of *data fails.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Dan Carpener <dan.carpenter@oracle.com>
Deepa Dinamani [Thu, 24 Jan 2019 08:29:20 +0000 (00:29 -0800)]
Input: input_event - fix the CONFIG_SPARC64 mixup
Arnd Bergmann pointed out that CONFIG_* cannot be used in a uapi header.
Override with an equivalent conditional.
Fixes: 596612904f9b ("Input: input_event - provide override for sparc64") Fixes: 783d9ff5eb65 ("Input: extend usable life of event timestamps to 2106 on 32 bit systems") Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Chris Wilson [Wed, 23 Jan 2019 13:51:55 +0000 (13:51 +0000)]
drm/i915/execlists: Mark up priority boost on preemption
Record the priority boost we giving to the preempted client or else we
may end up in a situation where the priority queue no longer matches the
request priority order and so we can end up in an infinite loop of
preempting the same pair of requests.
Hannes Reinecke [Wed, 9 Jan 2019 08:45:15 +0000 (09:45 +0100)]
nvme-multipath: drop optimization for static ANA group IDs
Bit 6 in the ANACAP field is used to indicate that the ANA group ID
doesn't change while the namespace is attached to the controller.
There is an optimisation in the code to only allocate space
for the ANA group header, as the namespace list won't change and
hence would not need to be refreshed.
However, this optimisation was never carried over to the actual
workflow, which always assumes that the buffer is large enough
to hold the ANA header _and_ the namespace list.
So drop this optimisation and always allocate enough space.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
projects / kernel.git / log